Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hashtable size is really unsigned so sparse complains when you pass
a signed integer. Change all uses to make it consistent.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ranges to the new revision. This doesn't affect
compatibility since the new revision was not released yet.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCPMSS target in Xtables should consider the MTU of the reverse
route on forwarded packets as part of the path MTU.
Point in case: IN=ppp0, OUT=eth0. MSS set to 1460 in spite of MTU of
ppp0 being 1392.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When number of entries exceeds number of initial entries, foo-tables code
will pin table module. But during table unregister on netns stop,
that additional pin was forgotten.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Propagate netns from userspace.
* arpt_register_table() registers table in supplied netns.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now it's possible to list and manipulate per-netns ip6tables rules.
Filtering decisions are based on init_net's table so far.
P.S.: remove init_net check in inet6_create() to see the effect
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Propagate netns from userspace down to xt_find_table_lock()
* Register ip6 tables in netns (modules still use init_net)
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, iptables show and configure different set of rules in different
netnss'. Filtering decisions are still made by consulting only
init_net's set.
Changes are identical except naming so no splitting.
P.S.: one need to remove init_net checks in nf_sockopt.c and inet_create()
to see the effect.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
.. all the way down to table searching functions.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Typical table module registers xt_table structure (i.e. packet_filter)
and link it to list during it. We can't use one template for it because
corresponding list_head will become corrupted. We also can't unregister
with template because it wasn't changed at all and thus doesn't know in
which list it is.
So, we duplicate template at the very first step of table registration.
Table modules will save it for use during unregistration time and actual
filtering.
Do it at once to not screw bisection.
P.S.: renaming i.e. packet_filter => __packet_filter is temporary until
full netnsization of table modules is done.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fact all we want is per-netns set of rules, however doing that will
unnecessary complicate routines such as ipt_hook()/ipt_do_table, so
make full xt_table array per-netns.
Every user stubbed with init_net for a while.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch from 0/-E to ptr/PTR_ERR convention.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the MODULES_DESCRIPTION() tags for all Ebtables modules.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the xt_conntrack match revision 1 by port matching (all four
{orig,repl}{src,dst}) and by packet direction matching.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before the removal of the deferred output hooks, netoutdev was used in
case of VLANs on top of a bridge to store the VLAN device, so the
deferred hooks would see the correct output device. This isn't
necessary anymore since we're calling the output hooks for the correct
device directly in the IP stack.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hash table is already initialized by nf_ct_alloc_hashtable().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
CHECK net/netfilter/nf_conntrack_expect.c
net/netfilter/nf_conntrack_expect.c:429:13: warning: context imbalance in 'exp_seq_start' - wrong count at exit
net/netfilter/nf_conntrack_expect.c:441:13: warning: context imbalance in 'exp_seq_stop' - unexpected unlock
CHECK net/netfilter/nf_log.c
net/netfilter/nf_log.c:105:13: warning: context imbalance in 'seq_start' - wrong count at exit
net/netfilter/nf_log.c:125:13: warning: context imbalance in 'seq_stop' - unexpected unlock
CHECK net/netfilter/nfnetlink_queue.c
net/netfilter/nfnetlink_queue.c:363:7: warning: symbol 'size' shadows an earlier one
net/netfilter/nfnetlink_queue.c:217:9: originally declared here
net/netfilter/nfnetlink_queue.c:847:13: warning: context imbalance in 'seq_start' - wrong count at exit
net/netfilter/nfnetlink_queue.c:859:13: warning: context imbalance in 'seq_stop' - unexpected unlock
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The address of IPv6 raw sockets was shown in the wrong format, from
IPv4 ones. The problem has been introduced by the commit
42a73808ed ("[RAW]: Consolidate proc
interface.")
Thanks to Adrian Bunk who originally noticed the problem.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to use 128 bytes on the stack at all. Clean the code
in the IPv6 style.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Different hashtables are used for IPv6 and IPv4 raw sockets, so no
need to check the socket family in the iterator over hashtables. Clean
this out.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I made a silly typo by entering IPPROTO_IP (== 0) instead of
IPPROTO_IPIP (== 4). This broke the reception of incompressible
packets.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
All but one struct dst_ops static initializations miss explicit
initialization of entries field.
As this field is atomic_t, we should use ATOMIC_INIT(0), and not
rely on atomic_t implementation.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NewReno should add cnt per skb (as with FACK) instead of depending on
SACKED_ACKED bits which won't be set with it at all. Effectively,
NewReno should always exists after the first iteration anyway (or
immediately if there's already head in lost_out.
This was fixed earlier in net-2.6.25 but got reverted among other
stuff and I didn't notice that this is still necessary (actually
wasn't even considering this case while trying to figure out the
reports because I lived with different kind of code than it in reality
was).
This should solve the WARN_ONs in TCP code that as a result of this
triggered multiple times in every place we check for this invariant.
Special thanks to Dave Young <hidave.darkstar@gmail.com> and Krishna
Kumar2 <krkumar2@in.ibm.com> for trying with my debug patches.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Krishna Kumar2 <krkumar2@in.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comment about "race free view of the set of network
namespaces" was a bit hasty. Look (there even can be only
one CPU, as discovered by Alexey Dobriyan and Denis Lunev):
put_net()
if (atomic_dec_and_test(&net->refcnt))
/* true */
__put_net(net);
queue_work(...);
/*
* note: the net now has refcnt 0, but still in
* the global list of net namespaces
*/
== re-schedule ==
register_pernet_subsys(&some_ops);
register_pernet_operations(&some_ops);
(*some_ops)->init(net);
/*
* we call netlink_kernel_create() here
* in some places
*/
netlink_kernel_create();
sk_alloc();
get_net(net); /* refcnt = 1 */
/*
* now we drop the net refcount not to
* block the net namespace exit in the
* future (or this can be done on the
* error path)
*/
put_net(sk->sk_net);
if (atomic_dec_and_test(&...))
/*
* true. BOOOM! The net is
* scheduled for release twice
*/
When thinking on this problem, I decided, that getting and
putting the net in init callback is wrong. If some init
callback needs to have a refcount-less reference on the struct
net, _it_ has to be careful himself, rather than relying on
the infrastructure to handle this correctly.
In case of netlink_kernel_create(), the problem is that the
sk_alloc() gets the given namespace, but passing the info
that we don't want to get it inside this call is too heavy.
Instead, I propose to crate the socket inside an init_net
namespace and then re-attach it to the desired one right
after the socket is created.
After doing this, we also have to be careful on error paths
not to drop the reference on the namespace, we didn't get
the one on.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Denis Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing initialization of the new nl_info.nl_net field in
rtm_to_fib6_config(). This will be needed the store network namespace
associated to the fib6_config struct.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.
It requires CAP_NET_ADMIN capability.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update firmware to support programmable flow control.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the programmable high/low water marks in 5709 for
802.3 flow control.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CTX_WR macro is unnecessary and obfuscates the code.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code. Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the tx coalescing setup code independent of the MSIX vector.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bluetooth hci_conn sysfs add/del executed in the default
workqueue. If the del_conn is executed after the new add_conn with
same target, add_conn will failed with warning of "same kobject name".
Here add btaddconn & btdelconn workqueues, flush the btdelconn
workqueue in the add_conn function to avoid the issue.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I moved the nexthdr setting out of IPComp I accidently moved
the reading of ipch->nexthdr after the decompression. Unfortunately
this means that we'd be reading from a stale ipch pointer which
doesn't work very well.
This patch moves the reading up so that we get the correct nexthdr
value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update fib_trie with some fib_hash fixes:
- check for duplicate alternative routes for prefix+tos+priority when
replacing route
- properly insert by matching tos together with priority
- fix alias walking to use list_for_each_entry_continue for insertion
and deletion when fa_head is not NULL
- copy state from fa to new_fa on replace (not a problem for now)
- additionally, avoid replacement without error if new route is same,
as Joonwoo Park suggests.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_info can be shared by many route prefixes but we don't want
duplicate alternative routes for a prefix+tos+priority. Last change
was not correct to check fib_treeref because it accounts usage from
other prefixes. Additionally, avoid replacement without error if new
route is same, as Joonwoo Park suggests.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fix miss of check for report unrecognized HMAC Algorithm
parameter. When AUTH is disabled, goto fall through path to report
unrecognized parameter, else, just break
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9825
The inet_diag_lock_handler function uses ERR_PTR to encode errors but
its callers were testing against NULL.
This only happens when the only inet_diag modular user, DCCP, is not
built into the kernel or available as a module.
Also there was a problem with not dropping the mutex lock when a handler
was not found, also fixed in this patch.
This caused an OOPS and ss would then hang on subsequent calls, as
&inet_diag_table_mutex was being left locked.
Thanks to spike at ml.yaroslavl.ru for report it after trying 'ss -d'
on a kernel that doesn't have DCCP available.
This bug was introduced in cset
d523a328fb ("Fix inet_diag dead-lock
regression"), after 2.6.24-rc3, so just 2.6.24 seems to be affected.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger