When first initialized, cur_tx points to the 1st
entry in the queue, and dirty_tx points to the last.
At this point, fec_enet_get_free_txdesc_num will
return tx_ring_size -2. If tx_ring_size -2 entries
are now queued, then fec_enet_get_free_txdesc_num
should return 0, but it returns tx_ring_size instead.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On an overrun, the other flags are not
valid, so don't check them.
Also, don't pass bad frames up the stack.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting the FTRL register will stop the fec from
trying to use multiple receive buffers.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to require the bond down while changing these settings, the change
will be reflected immediately and the 3ad mode will sort itself out.
For faster convergence set port->ntt to true in order to generate new
LACPDUs immediately.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain 802.11 wireless deployments, there will be NA proxies
that use knowledge of the network to correctly answer requests.
To prevent unsolicitd advertisements on the shared medium from
being a problem, on such deployments wireless needs to drop them.
Enable this by providing an option called "drop_unsolicited_na".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv6 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain 802.11 wireless deployments, there will be ARP proxies
that use knowledge of the network to correctly answer requests.
To prevent gratuitous ARP frames on the shared medium from being
a problem, on such deployments wireless needs to drop them.
Enable this by providing an option called "drop_gratuitous_arp".
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to solve a problem with 802.11, the so-called hole-196 attack,
add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if
enabled, causes the stack to drop IPv4 unicast packets encapsulated in
link-layer multi- or broadcast frames. Such frames can (as an attack)
be created by any member of the same wireless network and transmitted
as valid encrypted frames since the symmetric key for broadcast frames
is shared between all stations.
Additionally, enabling this option provides compliance with a SHOULD
clause of RFC 1122.
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the checkpatch.pl error to bpf_dbg.c:
ERROR: do not initialise statics to 0
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for filtering link dumps by master device and kind, similar
to the filtering implemented for neighbor dumps.
Each net_device that exists adds between 1196 bytes (eth) and 1556 bytes
(bridge) to the link dump. As the number of interfaces increases so does
the amount of data pushed to user space for a link list. If the user
only wants to see a list of specific devices (e.g., interfaces enslaved
to a specific bridge or a list of VRFs) most of that data is thrown away.
Passing the filters to the kernel to have only relevant data returned
makes the dump more efficient.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Craig Gallek says:
====================
Faster SO_REUSEPORT for TCP
This patch series complements an earlier series (6a5ef90c58)
which added faster SO_REUSEPORT lookup for UDP sockets by
extending the feature to TCP sockets. It uses the same
array-based data structure which allows for socket selection
after finding the first listening socket that matches an incoming
packet. Prior to this feature, every socket in the reuseport
group needed to be found and examined before a selection could be
made.
With this series the SO_ATTACH_REUSEPORT_CBPF and
SO_ATTACH_REUSEPORT_EBPF socket options now work for TCP sockets
as well. The test at the end of the series includes an example of
how to use these options to select a reuseport socket based on the
cpu core id handling the incoming packet.
There are several refactoring patches that precede the feature
implementation. Only the last two patches in this series
should result in any behavioral changes.
v4
- Fix build issue when compiling IPv6 as a module. This required
moving the ipv6_rcv_saddr_equal into an object that is included as a
built-in object. I included this change in the second patch which
adds inet6_hash since that is where ipv6_rcv_saddr_equal will
later be called from non-module code.
v3:
- Another warning in the first patch caught by a build bot. Return 0 in
the no-op UDP hash function.
v2:
- In the first patched I missed a couple of hash functions that should now be
returning int instead of void. I missed these the first time through as it
only generated a warning and not an error :\
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately the existing test relied on packet payload in order to
map incoming packets to sockets. In order to get this to work with TCP,
TCP_FASTOPEN needed to be used.
Since the fast open path is slightly different than the standard TCP path,
I created a second test which sends to reuseport group members based
on receiving cpu core id. This will probably serve as a better
real-world example use as well.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change extends the fast SO_REUSEPORT socket lookup implemented
for UDP to TCP. Listener sockets with SO_REUSEPORT and the same
receive address are additionally added to an array for faster
random access. This means that only a single socket from the group
must be found in the listener list before any socket in the group can
be used to receive a packet. Previously, every socket in the group
needed to be considered before handing off the incoming packet.
This feature also exposes the ability to use a BPF program when
selecting a socket from a reuseport group.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of the lines in this patch probably should have been included
in the initial implementation of this code for generic socket
support, but weren't technically necessary since only UDP sockets
were supported.
First, the sk_reuseport_cb points to a structure which assumes
each socket in the group has this pointer assigned at the same
time it's added to the array in the structure. The sk_clone_lock
function breaks this assumption. Since a child socket shouldn't
implicitly be in a reuseport group, the simple fix is to clear
the field in the clone.
Second, the SO_ATTACH_REUSEPORT_xBPF socket options require that
SO_REUSEPORT also be set first. For UDP sockets, this is easily
enforced at bind-time since that process both puts the socket in
the appropriate receive hlist and updates the reuseport structures.
Since these operations can happen at two different times for TCP
sockets (bind and listen) it must be explicitly checked to enforce
the use of SO_REUSEPORT with SO_ATTACH_REUSEPORT_xBPF in the
setsockopt call.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preliminary step to allow fast socket lookup of SO_REUSEPORT
groups. Doing so with a BPF filter will require access to the
skb in question. This change plumbs the skb (and offset to payload
data) through the call stack to the listening socket lookup
implementations where it will be used in a following patch.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_hdrlen is wasteful if you already have a pointer to struct tcphdr.
This splits the size calculation into a helper function that can be
used if a struct tcphdr is already available.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support fast lookups for TCP sockets with SO_REUSEPORT,
the function that adds sockets to the listening hash set needs
to be able to check receive address equality. Since this equality
check is different for IPv4 and IPv6, we will need two different
socket hashing functions.
This patch adds inet6_hash identical to the existing inet_hash function
and updates the appropriate references. A following patch will
differentiate the two by passing different comparison functions to
__inet_hash.
Additionally, in order to use the IPv6 address equality function from
inet6_hashtables (which is compiled as a built-in object when IPv6 is
enabled) it also needs to be in a built-in object file as well. This
moves ipv6_rcv_saddr_equal into inet_hashtables to accomplish this.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support fast reuseport lookups in TCP, the hash function
defined in struct proto must be capable of returning an error code.
This patch changes the function signature of all related hash functions
to return an integer and handles or propagates this return value at
all call sites.
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drops our private reference counting implementation and
substitutes it with the kref objects/functions.
Then you have a patch, by Simon Wunderlich, that
makes the broadcast protection window code more generic so
that it can be re-used in the future by other components
with different requirements.
Lastly, Sven is also introducing two lockdep asserts in
functions operating on our TVLV container list, to make
sure that the proper lock is always acquired by the users.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Qo6q
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
Here you have a batch of patches by Sven Eckelmann that
drops our private reference counting implementation and
substitutes it with the kref objects/functions.
Then you have a patch, by Simon Wunderlich, that
makes the broadcast protection window code more generic so
that it can be re-used in the future by other components
with different requirements.
Lastly, Sven is also introducing two lockdep asserts in
functions operating on our TVLV container list, to make
sure that the proper lock is always acquired by the users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ajit Khaparde says:
====================
be2net Patch series
Please consider applying these two patches to net-next
Patch-1: Request RSS capability of Rx interface depending on number of
Rx rings
Patch-2: Interpret and log new data that's added to the port
misconfigure async event
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
>From FW version 11.0. onwards, the PORT_MISCONFIG event generated by the FW
will carry more information about the event in the "data_word1"
and "data_word2" fields. This patch adds support in the driver to parse the
new information and log it accordingly. This patch also changes some of the
messages that are being logged currently.
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we request RSS capability even if a single Rx ring is created.
As a result in few cases we unnecessarily consume an RSS capable interface
which is a limited resource in the chip.
This patch enables RSS on an interface only if more than one Rx ring
is created.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The batadv_tvlv_container* functions state in their kernel-doc that they
require tvlv.container_list_lock. Add an assert to automatically detect
when this might have been ignored by the caller.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
To allow future use of the window protected function with different
maximum sequence numbers, add a parameter to set this value which
was previously hardcoded. Another parameter added for future use is a
flag to return whether the protection window has started.
While at it, also fix the kerneldoc.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The references to the network device should be dropped inside the release
function for batadv_hard_iface similar to what is done with the batman-adv
internal datastructures.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Remove the unused code of sxgbe_xpcs.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Byungho An <bh74.an@samsung.com>
Cc: Girish K S <ks.giri@samsung.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1601191918470.2531@hadrien
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov says:
====================
Factor out register bit twiddling in the Renesas Ethernet drivers
Here's a set of 2 patches against DaveM's 'net-next.git' repo. We factor out
the often repeated pattern of reading a register, AND'ing and/or OR'ing some
bits, and then writing the value back.
[1/2] ravb: factor out register bit twiddling code
[2/2] sh_eth: factor out register bit twiddling code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver has often repeated pattern of reading a register, AND'ing and/or
OR'ing some bits and writing the value back. Factor the pattern out into
sh_eth_modify() -- this saves 84 bytes of code with ARM gcc 4.7.3.
While at it, update Cogent Embedded's copyright.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver has often repeated pattern of reading a register, AND'ing and/or
OR'ing some bits and writing the value back. Factor the pattern out into
ravb_modify() -- this saves 260 bytes of code with ARM gcc 4.7.3.
While at it, update Cogent Embedded's copyrights.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn says:
====================
packet: tpacket gso and csum offload
Extend PACKET_VNET_HDR socket option support to packet sockets with
memory mapped rings.
Patches 2 and 4 add support to tpacket_rcv and tpacket_snd.
Patch 1 prepares for this by moving the relevant virtio_net_hdr
logic out of packet_snd and packet_rcv into helper functions.
GSO transmission requires all headers in the skb linear section.
Patch 3 moves parsing of tx_ring slot headers before skb allocation
to enable allocation with sufficient linear size.
Changes
v1->v2:
- fix bounds checks:
- subtract sizeof(vnet_hdr) before comparing tp_len to size_max
- compare tp_len to size_max also with GSO, just do not truncate to MTU
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support socket option PACKET_VNET_HDR together with PACKET_TX_RING.
When enabled, a struct virtio_net_hdr is expected to precede the data
in the ring. The vnet option must be set before the ring is created.
The implementation reuses the existing skb_copy_bits code that is used
when dev->hard_header_len is non-zero. Move this ll_header check to
before the skb alloc and combine it with a test for vnet_hdr->hdr_len.
Allocate and copy the max of the two.
Verified with test program at
github.com/wdebruij/kerneltools/blob/master/tests/psock_txring_vnet.c
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky