It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211201163421.2631661-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1634095731-4528-1-git-send-email-wangqing@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.
Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.
-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit
After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.
Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This series takes care of a couple of TODOs and adds new ones. Update
the TODOs section to reflect current state and future work that needs
to happen.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-5-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move fast commit stats updating logic to a separate function from
ext4_fc_commit(). This significantly improves readability of
ext4_fc_commit().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-4-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch drops ext4_fc_start_ineligible() and
ext4_fc_stop_ineligible() APIs. Fast commit ineligible transactions
should simply call ext4_fc_mark_ineligible() after starting the
trasaction.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-3-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch drops all calls to ext4_fc_start_update() and
ext4_fc_stop_update(). To ensure that there are no ongoing journal
updates during fast commit, we also make jbd2_fc_begin_commit() lock
journal for updates. This way we don't have to maintain two different
transaction start stop APIs for fast commit and full commit. This
patch doesn't remove the functions altogether since in future we want
to have inode level locking for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
i_version mount option is getting lost on remount. This is because the
'i_version' mount option differs from the util-linux mount option
'iversion', but it has exactly the same functionality. We have to
specifically notify the vfs that this is what we want by setting
appropriate flag in fc->sb_flags. Fix it and as a result we can remove
*flags argument from __ext4_remount(); do the same for
__ext4_fill_super().
In addition set out to deprecate ext4 specific 'i_version' mount option
in favor or 'iversion' by kernel version 5.20.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211222104517.11187-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The lazytime and nolazytime mount options were added temporarily back in
2015 with commit a26f49926d ("ext4: add optimization for the lazytime
mount option"). It think it has been enough time for the util-linux with
lazytime support to get widely used. Remove the mount options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211222104517.11187-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Switching to the new mount api introduced inconsistency in how the
journalling mode mount option (data=) is handled during a remount.
Ext4 always prevented changing the journalling mode during the remount,
however the new code always fails the remount when the journalling mode
is specified, even if it remains unchanged. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211220152657.101599-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused match_table_t, slim down mount_opts structure by removing
unnecessary definitions, remove redundant MOPT_ flags and clean up
ext4_parse_param() by converting the most of the if/else branching to
switch except for the MOPT_SET/MOPT_CEAR handling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-14-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the necessary functions for the fs_context_operations. Convert and
rename ext4_remount() and ext4_fill_super() to ext4_get_tree() and
ext4_reconfigure() respectively and switch the ext4 to use the new api.
One user facing change is the fact that we no longer have access to the
entire string of mount options provided by mount(2) since the mount api
does not store it anywhere. As a result we can't print the options to
the log as we did in the past after the successful mount.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-13-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change token2str() to use ext4_param_specs instead of tokens so that we
can get rid of tokens entirely.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-12-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Clean up return values in handle_mount_opt() and rename the function to
ext4_parse_param()
Now we can use it in fs_context_operations as .parse_param.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-11-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The new mount api separates option parsing and super block setup into
two distinct steps and so we need to separate the options parsing out of
the ext4_fill_super() and ext4_remount().
In order to achieve this we have to create new ext4_fill_super() and
ext4_remount() functions which will serve its purpose only until we
actually do convert to the new api (as such they are only temporary for
this patch series) and move the option parsing out of the old function
which will now be renamed to __ext4_fill_super() and __ext4_remount().
There is a small complication in the fact that while the mount option
parsing is going to happen before we get to __ext4_fill_super(), the
mount options stored in the super block itself needs to be applied
first, before the user specified mount options.
So with this patch we're going through the following sequence:
- parse user provided options (including sb block)
- initialize sbi and store s_sb_block if provided
- in __ext4_fill_super()
- read the super block
- parse and apply options specified in s_mount_opts
- check and apply user provided options stored in ctx
- continue with the regular ext4_fill_super operation
It's not exactly the most elegant solution, but if we still want to
support s_mount_opts we have to do it in this order.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At the parsing phase of mount in the new mount api sb will not be
available. We've already removed some uses of sb and sbi, but now we
need to get rid of the rest of it.
Use ext4_fs_context to store all of the configuration specification so
that it can be later applied to the super block and sbi.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-9-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At the parsing phase of mount in the new mount api sb will not be
available so move ext2/3 compatibility check outside handle_mount_opt().
Unfortunately we will lose the ability to show exactly which option is
not compatible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-8-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At the parsing phase of mount in the new mount api sb will not be
available so move quota confiquration out of handle_mount_opt() by
noting the quota file names in the ext4_fs_context structure to be
able to apply it later.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-7-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
At the parsing phase of mount in the new mount api sb will not be
available so allow sb to be NULL in ext4_msg and use that in
handle_mount_opt().
Also change return value to appropriate -EINVAL where needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-6-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the new mount option specifications to parse the options in
handle_mount_opt(). However we're still using the old API to get the
options string.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-5-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move option validation out of parse_options() into a separate function
ext4_validate_options().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-4-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create an array of fs_parameter_spec called ext4_param_specs to
hold the mount option specifications we're going to be using with the
new mount api.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the last user of ->bdev in dax.c by requiring the file system to
pass in an address that already includes the DAX offset. As part of the
only set ->bdev or ->daxdev when actually required in the ->iomap_begin
methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-27-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prepare for the removal of the block_device from the DAX I/O path by
returning the partition offset from fs_dax_get_by_bdev so that the file
systems have it at hand for use during I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-26-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a flag so that the file system can easily detect DAX operations
based just on the iomap operation requested instead of looking at
inode state using IS_DAX. This will be needed to apply the to be
added partition offset only for operations that actually use DAX,
but not things like fiemap that are based on the block device.
In the long run it should also allow turning the bdev, dax_dev
and inline_data into a union.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-25-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Only call fs_dax_get_by_bdev once the sbi has been allocated and remove
the need for the dax_dev local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-21-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unshare the DAX and iomap buffered I/O page zeroing code. This code
previously did a IS_DAX check deep inside the iomap code, which in
fact was the only DAX check in the code. Instead move these checks
into the callers. Most callers already have DAX special casing anyway
and XFS will need it for reflink support as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-19-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just open code the block size and dax_dev == NULL checks in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
fixes for the combination of the inline_data and fast_commit fixes,
and more accurately calculating when to schedule additional lazy inode
table init, especially when CONFIG_HZ is 100HZ.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmGMDF0ACgkQ8vlZVpUN
gaNW+Af+JGM6VFLMCxwrpRHQB76/CCo6/oAxr7yy1HdRl0k64/hLpH1bGJcBDxz1
4x8Uof1G97ZPv/yqbFnxTv64BEFTh9MkHQCO2nDNzhiq8xQHJqN0SjaMoUqWJWoL
gnXlGxpnEXVDhXxOK8/qhAAzH2r/zbeGVAxn7JzTmGXQLM6EcYqCKLlijGcOdNzR
ENvCeNwUOL94ImvtDcETtSXX4GKpFgd+LsTmKajMDiWkHUJ+8ChMGpd8JBHLBT8N
IfxdLGqFYY0FXAFcnpSMRhS3koV9L8buWvSZsK+dx+/j9Shn6qiHFuxOgZqpVQwh
lFmgRrUrMSoLNsBCTWhvBVghmlAixg==
=QUNC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Only bug fixes and cleanups for ext4 this merge window.
Of note are fixes for the combination of the inline_data and
fast_commit fixes, and more accurately calculating when to schedule
additional lazy inode table init, especially when CONFIG_HZ is 100HZ"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix error code saved on super block during file system abort
ext4: inline data inode fast commit replay fixes
ext4: commit inline data during fast commit
ext4: scope ret locally in ext4_try_to_trim_range()
ext4: remove an unused variable warning with CONFIG_QUOTA=n
ext4: fix boolreturn.cocci warnings in fs/ext4/name.c
ext4: prevent getting empty inode buffer
ext4: move ext4_fill_raw_inode() related functions
ext4: factor out ext4_fill_raw_inode()
ext4: prevent partial update of the extent blocks
ext4: check for inconsistent extents between index and leaf block
ext4: check for out-of-order index extents in ext4_valid_extent_entries()
ext4: convert from atomic_t to refcount_t on ext4_io_end->count
ext4: refresh the ext4_ext_path struct after dropping i_data_sem.
ext4: ensure enough credits in ext4_ext_shift_path_extents
ext4: correct the left/middle/right debug message for binsearch
ext4: fix lazy initialization next schedule time computation in more granular unit
Revert "ext4: enforce buffer head state assertion in ext4_da_map_blocks"
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmGFN6IACgkQnJ2qBz9k
QNkfYwgA1w5x/CsN2IMZdx6FTuZFgbOvQpBMTry8iuOPKK3UyIkZaUirTVLKR0cm
k3QbBR9/vTfQTNg5weuFJcbPZZaCXKEvlPGvDh+pumMbfTkMwL3FADweNBoZ3PzO
EiRrV45AbRgSMOzsfURzCz1T53Gd8fYM3pXxmNXG+bnE7+Ea+heKgor8/jFc4U3w
kAKZTfyCiheo7KxVhFGnkGI3ZhIbnbZne4seY/CE4qtv7/bmBE7bhGpmv8LT5FUn
h/JBDLjFU0fzJpplXE6n/VHXeGaUwb8adnYpzojWQ0lLYFrMIZFQ0KkDK6PNwmJF
MKWGqRxDkf54oeWuEAJ9t4/OorqM9A==
=ltE7
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Support for reporting filesystem errors through fanotify so that
system health monitoring daemons can watch for these and act instead
of scraping system logs"
* tag 'fsnotify_for_v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
samples: remove duplicate include in fs-monitor.c
samples: Fix warning in fsnotify sample
docs: Fix formatting of literal sections in fanotify docs
samples: Make fs-monitor depend on libc and headers
docs: Document the FAN_FS_ERROR event
samples: Add fs error monitoring example
ext4: Send notifications on error
fanotify: Allow users to request FAN_FS_ERROR events
fanotify: Emit generic error info for error event
fanotify: Report fid info for file related file system errors
fanotify: WARN_ON against too large file handles
fanotify: Add helpers to decide whether to report FID/DFID
fanotify: Wrap object_fh inline space in a creator macro
fanotify: Support merging of error events
fanotify: Support enqueueing of error events
fanotify: Pre-allocate pool of error events
fanotify: Reserve UAPI bits for FAN_FS_ERROR
fsnotify: Support FS_ERROR event type
fanotify: Require fid_mode for any non-fd event
fanotify: Encode empty file handle when no inode is provided
...
ext4_abort will eventually call ext4_errno_to_code, which translates the
errno to an EXT4_ERR specific error. This means that ext4_abort expects
an errno. By using EXT4_ERR_ here, it gets misinterpreted (as an errno),
and ends up saving EXT4_ERR_EBUSY on the superblock during an abort,
which makes no sense.
ESHUTDOWN will get properly translated to EXT4_ERR_SHUTDOWN, so use that
instead.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20211026173302.84000-1-krisman@collabora.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since there are no blocks in an inline data inode, there's no point in
fixing iblocks field in fast commit replay path for this inode.
Similarly, there's no point in fixing any block bitmaps / global block
counters with respect to such an inode. Just bail out from these
functions if an inline data inode is encountered.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the commit phase in fast commits if an inode with inline data
is being committed, also commit the inline data along with
inode. Since recovery code just blindly copies entire content found in
inode TLV, there is no change needed on the recovery path. Thus, this
change is backward compatiable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As commit 6920b39132 ("ext4: add new helper interface
ext4_try_to_trim_range()") moves some code into the separate function
ext4_try_to_trim_range(), the use of the variable ret within that
function is more limited and can be adjusted as well.
Scope the use of the variable ret locally and drop dead assignments.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210820120853.23134-1-lukas.bulwahn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'enable_quota' variable is only used in an CONFIG_QUOTA.
With CONFIG_QUOTA=n, compiler causes a harmless warning:
fs/ext4/super.c: In function ‘ext4_remount’:
fs/ext4/super.c:5840:6: warning: variable ‘enable_quota’ set but not used
[-Wunused-but-set-variable]
int enable_quota = 0;
^~~~~
Move 'enable_quota' into the same #ifdef CONFIG_QUOTA block
to remove an unused variable warning.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824034929.GA13415@raspberrypi
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return statements in functions returning bool should use true/false
instead of 1/0.
./fs/ext4/namei.c:1441:12-13:WARNING:return of 0/1 in function
'ext4_match' with return type bool
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824055543.58718-1-deng.changcheng@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_get_inode_loc(), we may skip IO and get an zero && uptodate
inode buffer when the inode monopolize an inode block for performance
reason. For most cases, ext4_mark_iloc_dirty() will fill the inode
buffer to make it fine, but we could miss this call if something bad
happened. Finally, __ext4_get_inode_loc_noinmem() may probably get an
empty inode buffer and trigger ext4 error.
For example, if we remove a nonexistent xattr on inode A,
ext4_xattr_set_handle() will return ENODATA before invoking
ext4_mark_iloc_dirty(), it will left an uptodate but zero buffer. We
will get checksum error message in ext4_iget() when getting inode again.
EXT4-fs error (device sda): ext4_lookup:1784: inode #131074: comm cat: iget: checksum invalid
Even worse, if we allocate another inode B at the same inode block, it
will corrupt the inode A on disk when write back inode B.
So this patch initialize the inode buffer by filling the in-mem inode
contents if we skip read I/O, ensure that the buffer is really uptodate.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for calling ext4_fill_raw_inode() in
__ext4_get_inode_loc(), move three related functions before
__ext4_get_inode_loc(), no logical change.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fill_raw_inode() from ext4_do_update_inode(), which is
use to fill the in-mem inode contents into the inode table buffer, in
preparation for initializing the exclusive inode buffer without reading
the block in __ext4_get_inode_loc().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the most error path of current extents updating operations are not
roll back partial updates properly when some bad things happens(.e.g in
ext4_ext_insert_extent()). So we may get an inconsistent extents tree
if journal has been aborted due to IO error, which may probability lead
to BUGON later when we accessing these extent entries in errors=continue
mode. This patch drop extent buffer's verify flag before updatng the
contents in ext4_ext_get_access(), and reset it after updating in
__ext4_ext_dirty(). After this patch we could force to check the extent
buffer if extents tree updating was break off, make sure the extents are
consistent.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that we can check out overlapping extents in leaf block and
out-of-order index extents in index block. But the .ee_block in the
first extent of one leaf block should equal to the .ei_block in it's
parent index extent entry. This patch add a check to verify such
inconsistent between the index and leaf block.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 5946d08937 ("ext4: check for overlapping extents in
ext4_valid_extent_entries()"), we can check out the overlapping extent
entry in leaf extent blocks. But the out-of-order extent entry in index
extent blocks could also trigger bad things if the filesystem is
inconsistent. So this patch add a check to figure out the out-of-order
index extents and return error.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1626674355-55795-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.
This addresses the BUG:
[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565] ext4_ext_shift_extents+0x3ee/0x710
[52117.479020] ext4_fallocate+0x139c/0x1b40
[52117.479405] ? __do_sys_newfstat+0x6b/0x80
[52117.479805] vfs_fallocate+0x151/0x4b0
[52117.480177] ksys_fallocate+0x4a/0xa0
[52117.480533] __x64_sys_fallocate+0x22/0x30
[52117.480930] do_syscall_64+0x35/0x80
[52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits. As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents(). This change is needed as a preparation
for the next bugfix patch.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The debuginfo for binsearch want to show the left/middle/right extent
while the process search for the goal block. However we show this info
after we change right or left.
Link: https://lore.kernel.org/r/20210903062748.4118886-2-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.
Fixes: bfff68738f ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 948ca5f30e.
Two crash reports from users running variations on 5.15-rc4 kernels
suggest that it is premature to enforce the state assertion in the
original commit. Both crashes were triggered by BUG calls in that
code, indicating that under some rare circumstance the buffer head
state did not match a delayed allocated block at the time the
block was written out. No reproducer is available. Resolving this
problem will require more time than remains in the current release
cycle, so reverting the original patch for the time being is necessary
to avoid any instability it may cause.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20211012171901.5352-1-enwlinux@gmail.com
Fixes: 948ca5f30e ("ext4: enforce buffer head state assertion in ext4_da_map_blocks")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock. In the most basic scenario, that buffer will not be
resident and it will be mapped to the same file. Accessing the buffer
will trigger a page fault, and gfs2 will deadlock trying to take the
same inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled.
-----BEGIN PGP SIGNATURE-----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=WeNd
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYX8U4hQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyXYAP0d7BNuKsMyw6qlzLMxbaO5wdTg2HaD
04ApVeHM6qp7IQEA/Ve2Mr+BcPOZ7E6io8haZtXs0MrRMYeessKWcWMCdQ0=
=2WNZ
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Allow 256-bit master keys with AES-256-XTS
- Improve documentation and comments
- Remove unneeded field fscrypt_operations::max_namelen"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: improve a few comments
fscrypt: allow 256-bit master keys with AES-256-XTS
fscrypt: improve documentation for inline encryption
fscrypt: clean up comments in bio.c
fscrypt: remove fscrypt_operations::max_namelen
Send a FS_ERROR message via fsnotify to a userspace monitoring tool
whenever a ext4 error condition is triggered. This follows the existing
error conditions in ext4, so it is hooked to the ext4_error* functions.
Link: https://lore.kernel.org/r/20211025192746.66445-30-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20211018101130.1838532-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't bother with pointless string parsing when the caller can just pass
the version in the format that the core expects. Also remove the
fallback to the latest version that none of the callers actually uses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Return the encoding table as the return value instead of as an argument,
and don't bother with the encoding flags as the caller can handle that
trivially.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
allocation. Also fix error handling code paths in ext4_dx_readdir()
and ext4_fill_super(). Finally, avoid a grabbing a journal head in
the delayed allocation write in the common cases where we are
overwriting an pre-existing block or appending to an inode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmFZ2SsACgkQ8vlZVpUN
gaN6DAgAkIeisL1EfQT0VwshEs8y7N6IoX8dydLSRLpNf5oWiJOv2CTY9Qpi6X/C
qNfuLsbJ2NXChvhIAM2hD82hvX21rYc6iqPxgho02VF4eYIP7NzLjwTFKnKbHPB5
TiF498nJTnkcmSrJUEXmSAEdLoCwa5THH9+9HVHXZrkLXPULBtOOJ85mDAcIzVhV
Zqb7yfbpWl0gnF0S0YjNATPtbhcC9EiC4MOVYVesRlgT9B3+k5q4fmVU0euTU9OH
F2H6TNG+Mg/19gTnDP5acB9+eXHvYEqMpe+CaDifR9iFE9PTG/Edhxr6z9roXhHr
kBvEVHSFH+YTEJXghnpS9YDd9Lwc9w==
=WKzd
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs in fast_commit, inline data, and delayed
allocation.
Also fix error handling code paths in ext4_dx_readdir() and
ext4_fill_super().
Finally, avoid a grabbing a journal head in the delayed allocation
write in the common cases where we are overwriting a pre-existing
block or appending to an inode"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: recheck buffer uptodate bit under buffer lock
ext4: fix potential infinite loop in ext4_dx_readdir()
ext4: flush s_error_work before journal destroy in ext4_fill_super
ext4: fix loff_t overflow in ext4_max_bitmap_size()
ext4: fix reserved space counter leakage
ext4: limit the number of blocks in one ADD_RANGE TLV
ext4: enforce buffer head state assertion in ext4_da_map_blocks
ext4: remove extent cache entries when truncating inline data
ext4: drop unnecessary journal handle in delalloc write
ext4: factor out write end code of inline file
ext4: correct the error path of ext4_write_inline_data_end()
ext4: check and update i_disksize properly
ext4: add error checking to ext4_ext_replay_set_iblocks()
Commit 8e33fadf94 ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.
Fixes: 8e33fadf94 ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.
[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375] ? __switch_to_asm+0x35/0x70
[32031.765635] ? __switch_to_asm+0x41/0x70
[32031.765893] ? __switch_to_asm+0x35/0x70
[32031.766148] ? __switch_to_asm+0x41/0x70
[32031.766405] ? _cond_resched+0x15/0x40
[32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934] jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218] flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487] process_one_work+0x195/0x390
[32031.767747] worker_thread+0x30/0x390
[32031.768007] ? process_one_work+0x390/0x390
[32031.768265] kthread+0x10d/0x130
[32031.768521] ? kthread_flush_work_fn+0x10/0x10
[32031.768778] ret_from_fork+0x35/0x40
static int start_this_handle(...)
BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this
Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.
Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
better add a extras flush_work before journal destroy in
ext4_fill_super
Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.
Fixes: c92dc85684 ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
Fixes: 51865fda28 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:
kernel BUG at fs/ext4/ext4_extents.h:199!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200
Call Trace:
? ext4_fc_write_inode+0xf2/0x150
ext4_fc_commit+0x93b/0xa00
? ext4_fallocate+0x1ad/0x10d0
ext4_sync_file+0x157/0x340
? ext4_sync_file+0x157/0x340
vfs_fsync_range+0x49/0x80
do_fsync+0x3d/0x70
__x64_sys_fsync+0x14/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Simply fixing it by limiting the number of blocks
in one EXT4_FC_TAG_ADD_RANGE TLV.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com
The max_namelen field is unnecessary, as it is set to 255 (NAME_MAX) on
all filesystems that support fscrypt (or plan to support fscrypt). For
simplicity, just use NAME_MAX directly instead.
Link: https://lore.kernel.org/r/20210909184513.139281-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Fix a race condition in the teardown path of raw mode pmem namespaces.
- Cleanup the code that filesystems use to detect filesystem-dax
capabilities of their underlying block device.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYTlBMgAKCRDfioYZHlFs
ZwQLAQCPhwpuOP+Byn7NksotnfmyLNyniK0mX7Me7PoLiyq0oAEAmqBwlr9YP7E3
NPzWiBzqPCvDIv1YG4C3Vam7ue1osgM=
=33O+
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Fix a race condition in the teardown path of raw mode pmem
namespaces.
- Cleanup the code that filesystems use to detect filesystem-dax
capabilities of their underlying block device.
* tag 'libnvdimm-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove bdev_dax_supported
xfs: factor out a xfs_buftarg_is_dax helper
dax: stub out dax_supported for !CONFIG_FS_DAX
dax: remove __generic_fsdax_supported
dax: move the dax_read_lock() locking into dax_supported
dax: mark dax_get_by_host static
dm: use fs_dax_get_by_bdev instead of dax_get_by_host
dax: stop using bdevname
fsdax: improve the FS_DAX Kconfig description and help text
libnvdimm/pmem: Fix crash triggered when I/O in-flight during unbind
Remove the code that re-initializes a buffer head with an invalid block
number and BH_New and BH_Delay bits when a matching delayed and
unwritten block has been found in the extent status cache. Replace it
with assertions that verify the buffer head already has this state
correctly set. The current code masked an inline data truncation bug
that left stale entries in the extent status cache. With this change,
generic/130 can be used to reproduce and detect that bug.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210819144927.25163-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Conditionally remove all cached extents belonging to an inode
when truncating its inline data. It's only necessary to attempt to
remove cached extents when a conversion from inline to extent storage
has been initiated (!EXT4_STATE_MAY_INLINE_DATA). This avoids
unnecessary es lock overhead in the more common inline case.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210819144927.25163-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fix a bug in how we update i_disksize, and the error path in
inline_data_end. Finally, drop an unnecessary creation of a journal
handle which was only needed for inline data, which can give us a
large performance gain in delayed allocation writes.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we factor out the inline data write procedure from
ext4_da_write_end(), we don't need to start journal handle for the cases
of both buffer overwrite and append-write. If we need to update
i_disksize, mark_inode_dirty() do start handle and update inode buffer.
So we could just remove all the journal handle codes in the delalloc
write procedure.
After this patch, we could get a lot of performance improvement. Below
is the Unixbench comparison data test on my machine with 'Intel Xeon
Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
======
System Benchmarks Index Score (Partial Only) 1186.6
After this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
======
System Benchmarks Index Score (Partial Only) 2053.0
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-5-yi.zhang@huawei.com
Now that the inline_data file write end procedure are falled into the
common write end functions, it is not clear. Factor them out and do
some cleanup. This patch also drop ext4_da_write_inline_data_end()
and switch to use ext4_write_inline_data_end() instead because we also
need to do the same error processing if we failed to write data into
inline entry.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
After commit 3da40c7b08 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmEw5gEACgkQ8vlZVpUN
gaMatgf9GKc2H3JUDGJVXrOE1EZWXzyDI+Tv6zt0iTr05zi1ahjGccAbmJXiAwxU
Zy5TGr53CpPcGUG+sO4NpVzcH8q7cQeG0pVx9OnzJUdVfmv+htoNE0aAqUY5L3vg
AxV4KPGgxPofRQa3QRE2LDFHIkNs7c0ncprdaAtxNztd09iFo7bIayt614mARK++
HIO7VOGrH5Wya8SSoqYHmlO0g5viy3ypP6CpysIQw0JifSlHYkmYBUJ0/hwPV/Xl
WfzmwQ9p43C9EXVmIN4++l674TDzkSn9ebITXOgkq4C8KjnFgyhKQIj5QVj81MvH
dac5jxsuLTXTLYnRpAQ/duV4jRd+Fw==
=+NN7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to some ext4 bug fixes and cleanups, this cycle we add the
orphan_file feature, which eliminates bottlenecks when doing a large
number of parallel truncates and file deletions, and move the discard
operation out of the jbd2 commit thread when using the discard mount
option, to better support devices with slow discard operations"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make the updating inode data procedure atomic
ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
ext4: move inode eio simulation behind io completeion
ext4: Improve scalability of ext4 orphan file handling
ext4: Orphan file documentation
ext4: Speedup ext4 orphan inode handling
ext4: Move orphan inode handling into a separate file
ext4: Support for checksumming from journal triggers
ext4: fix race writing to an inline_data file while its xattrs are changing
jbd2: add sparse annotations for add_transaction_credits()
ext4: fix sparse warnings
ext4: Make sure quota files are not grabbed accidentally
ext4: fix e2fsprogs checksum failure for mounted filesystem
ext4: if zeroout fails fall back to splitting the extent node
ext4: reduce arguments of ext4_fc_add_dentry_tlv
ext4: flush background discard kwork when retry allocation
ext4: get discard out of jbd2 commit kthread contex
ext4: remove the repeated comment of ext4_trim_all_free
ext4: add new helper interface ext4_try_to_trim_range()
ext4: remove the 'group' parameter of ext4_trim_extent
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTDKKAAKCRDh3BK/laaZ
PG9PAQCUF0fdBlCKudwSEt5PV5xemycL9OCAlYCd7d4XbBIe9wEA6sVJL9J+OwV2
aF0NomiXtJccE+S9+byjVCyqSzQJGQQ=
=6L2Y
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
If the call to ext4_map_blocks() fails due to an corrupted file
system, ext4_ext_replay_set_iblocks() can get stuck in an infinite
loop. This could be reproduced by running generic/526 with a file
system that has inline_data and fast_commit enabled. The system will
repeatedly log to the console:
EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076
and the stack that it gets stuck in is:
ext4_block_to_path+0xe3/0x130
ext4_ind_map_blocks+0x93/0x690
ext4_map_blocks+0x100/0x660
skip_hole+0x47/0x70
ext4_ext_replay_set_iblocks+0x223/0x440
ext4_fc_replay_inode+0x29e/0x3b0
ext4_fc_replay+0x278/0x550
do_one_pass+0x646/0xc10
jbd2_journal_recover+0x14a/0x270
jbd2_journal_load+0xc4/0x150
ext4_load_journal+0x1f3/0x490
ext4_fill_super+0x22d4/0x2c00
With this patch, generic/526 still fails, but system is no longer
locking up in a tight loop. It's likely the root casue is that
fast_commit replay is corrupting file systems with inline_data, and we
probably need to add better error handling in the fast commit replay
code path beyond what is done here, which essentially just breaks the
infinite loop without reporting the to the higher levels of the code.
Fixes: 8016E29F4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Cc: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks.
- Use base64url instead of a custom Base64 variant.
- Document struct fscrypt_operations.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYS0HzhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+XZAQDfvDE9gK4Ii2uE4Jb5XYv4M/BnVhoR
WIhNEoHROIGv+AEAtyfmeCMdpPobkWHFfAE1iBysl3iS56fibQhi2wqyuQI=
=s6Wi
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some small fixes and cleanups for fs/crypto/:
- Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
st_size for encrypted symlinks
- Use base64url instead of a custom Base64 variant
- Document struct fscrypt_operations"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: document struct fscrypt_operations
fscrypt: align Base64 encoding with RFC 4648 base64url
fscrypt: remove mention of symlink st_size quirk from documentation
ubifs: report correct st_size for encrypted symlinks
f2fs: report correct st_size for encrypted symlinks
ext4: report correct st_size for encrypted symlinks
fscrypt: add fscrypt_symlink_getattr() for computing st_size
Now that ext4_do_update_inode() return error before filling the whole
inode data if we fail to set inode blocks in ext4_inode_blocks_set().
This error should never happen in theory since sb->s_maxbytes should not
have allowed this, we have already init sb->s_maxbytes according to this
feature in ext4_fill_super(). So even through that could only happen due
to the filesystem corruption, we'd better to return after we finish
updating the inode because it may left an uninitialized buffer and we
could read this buffer later in "errors=continue" mode.
This patch make the updating inode data procedure atomic, call
EXT4_ERROR_INODE() after we dropping i_raw_lock after something bad
happened, make sure that the inode is integrated, and also drop a BUG_ON
and do some small cleanups.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "if (!buffer_uptodate(bh))" hunk covered almost the whole code after
getting buffer in __ext4_get_inode_loc() which seems unnecessary, remove
it and switch to check ext4_buffer_uptodate(), it simplify code and make
it more readable.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No EIO simulation is required if the buffer is uptodate, so move the
simulation behind read bio completeion just like inode/block bitmap
simulation does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210826130412.3921207-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Even though the length of the critical section when adding / removing
orphaned inodes was significantly reduced by using orphan file, the
contention of lock protecting orphan file still appears high in profiles
for truncate / unlink intensive workloads with high number of threads.
This patch makes handling of orphan file completely lockless. Also to
reduce conflicts between CPUs different CPUs start searching for empty
slot in orphan file in different blocks.
Performance comparison of locked orphan file handling, lockless orphan
file handling, and completely disabled orphan inode handling
from 80 CPU Xeon Server with 526 GB of RAM, filesystem located on
SAS SSD disk, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time Time
Orphan locked Orphan lockless No orphan
1 0.945600 0.939400 0.891200
2 1.331800 1.246600 1.174400
4 1.995000 1.780600 1.713200
8 6.424200 4.900000 4.106000
16 14.937600 8.516400 8.138000
32 33.038200 24.565600 24.002200
64 60.823600 39.844600 38.440200
128 122.941400 70.950400 69.315000
So we can see that with lockless orphan file handling, addition /
deletion of orphaned inodes got almost completely out of picture even
for a microbenchmark stressing it.
For reaim creat_clo workload on ramdisk there are also noticeable gains
(average of 5 runs):
Clients Vanilla (ops/s) Patched (ops/s)
creat_clo-1 14705.88 ( 0.00%) 14354.07 * -2.39%*
creat_clo-3 27108.43 ( 0.00%) 28301.89 ( 4.40%)
creat_clo-5 37406.48 ( 0.00%) 45180.73 * 20.78%*
creat_clo-7 41338.58 ( 0.00%) 54687.50 * 32.29%*
creat_clo-9 45226.13 ( 0.00%) 62937.07 * 39.16%*
creat_clo-11 44000.00 ( 0.00%) 65088.76 * 47.93%*
creat_clo-13 36516.85 ( 0.00%) 68661.97 * 88.03%*
creat_clo-15 30864.20 ( 0.00%) 69551.78 * 125.35%*
creat_clo-17 27478.45 ( 0.00%) 67729.08 * 146.48%*
creat_clo-19 25000.00 ( 0.00%) 61621.62 * 146.49%*
creat_clo-21 18772.35 ( 0.00%) 63829.79 * 240.02%*
creat_clo-23 16698.94 ( 0.00%) 61938.96 * 270.92%*
creat_clo-25 14973.05 ( 0.00%) 56947.61 * 280.33%*
creat_clo-27 16436.69 ( 0.00%) 65008.03 * 295.51%*
creat_clo-29 13949.01 ( 0.00%) 69047.62 * 395.00%*
creat_clo-31 14283.52 ( 0.00%) 67982.45 * 375.95%*
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 orphan inode handling is a bottleneck for workloads which heavily
truncate / unlink small files since it contends on the global
s_orphan_mutex lock (and generally it's difficult to improve scalability
of the ondisk linked list of orphaned inodes).
This patch implements new way of handling orphan inodes. Instead of
linking orphaned inode into a linked list, we store it's inode number in
a new special file which we call "orphan file". Only if there's no more
space in the orphan file (too many inodes are currently orphaned) we
fall back to using old style linked list. Currently we protect
operations in the orphan file with a spinlock for simplicity but even in
this setting we can substantially reduce the length of the critical
section and thus speedup some workloads. In the next patch we improve
this by making orphan handling lockless.
Note that the change is backwards compatible when the filesystem is
clean - the existence of the orphan file is a compat feature, we set
another ro-compat feature indicating orphan file needs scanning for
orphaned inodes when mounting filesystem read-write. This ro-compat
feature gets cleared on unmount / remount read-only.
Some performance data from 80 CPU Xeon Server with 512 GB of RAM,
filesystem located on SSD, average of 5 runs:
stress-orphan (microbenchmark truncating files byte-by-byte from N
processes in parallel)
Threads Time Time
Vanilla Patched
1 1.057200 0.945600
2 1.680400 1.331800
4 2.547000 1.995000
8 7.049400 6.424200
16 14.827800 14.937600
32 40.948200 33.038200
64 87.787400 60.823600
128 206.504000 122.941400
So we can see significant wins all over the board.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Move functions for handling orphan inodes into a new file
fs/ext4/orphan.c to have them in one place and somewhat reduce size of
other files. No code changes.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
JBD2 layer support triggers which are called when journaling layer moves
buffer to a certain state. We can use the frozen trigger, which gets
called when buffer data is frozen and about to be written out to the
journal, to compute block checksums for some buffer types (similarly as
does ocfs2). This avoids unnecessary repeated recomputation of the
checksum (at the cost of larger window where memory corruption won't be
caught by checksumming) and is even necessary when there are
unsynchronized updaters of the checksummed data.
So add superblock and journal trigger type arguments to
ext4_journal_get_write_access() and ext4_journal_get_create_access() so
that frozen triggers can be set accordingly. Also add inode argument to
ext4_walk_page_buffers() and all the callbacks used with that function
for the same purpose. This patch is mostly only a change of prototype of
the above mentioned functions and a few small helpers. Real checksumming
will come later.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210816095713.16537-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add sparse annotations to suppress false positive context imbalance
warnings, and use NULL instead of 0 in EXT_MAX_{EXTENT,INDEX}.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The location of the system.data extended attribute can change whenever
xattr_sem is not taken. So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().
This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.
Cc: stable@kernel.org
Fixes: f19d5870cb ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812133122.26360-1-jack@suse.cz
Commit 81414b4dd4 ("ext4: remove redundant sb checksum
recomputation") removed checksum recalculation after updating
superblock free space / inode counters in ext4_fill_super() based on
the fact that we will recalculate the checksum on superblock
writeout.
That is correct assumption but until the writeout happens (which can
take a long time) the checksum is incorrect in the buffer cache and if
programs such as tune2fs or resize2fs is called shortly after a file
system is mounted can fail. So return back the checksum recalculation
and add a comment explaining why.
Fixes: 81414b4dd4 ("ext4: remove redundant sb checksum recomputation")
Cc: stable@kernel.org
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812124737.21981-1-jack@suse.cz
If the underlying storage device is using thin-provisioning, it's
possible for a zeroout operation to return ENOSPC.
Commit df22291ff0 ("ext4: Retry block allocation if we have free blocks
left") added logic to retry block allocation since we might get free block
after we commit a transaction. But the ENOSPC from thin-provisioning
will confuse ext4, and lead to an infinite loop.
Since using zeroout instead of splitting the extent node is an
optimization, if it fails, we might as well fall back to splitting the
extent node.
Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Let's pass fc_dentry directly since those arguments (tag, parent_ino and
ino etc) can be deferenced from it.
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210727080708.3708814-1-guoqing.jiang@linux.dev
The background discard kwork tries to mark blocks used and issue
discard. This can make filesystem suffer from NOSPC error, xfstest
generic/371 can fail due to it. Fix it by flushing discard kwork
in ext4_should_retry_alloc. At the same time, give up discard at
the moment.
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-6-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Right now, discard is issued and waited to be completed in jbd2
commit kthread context after the logs are committed. When large
amount of files are deleted and discard is flooding, jbd2 commit
kthread can be blocked for long time. Then all of the metadata
operations can be blocked to wait the log space.
One case is the page fault path with read mm->mmap_sem held, which
wants to update the file time but has to wait for the log space.
When other threads in the task wants to do mmap, then write mmap_sem
is blocked. Finally all of the following read mmap_sem requirements
are blocked, even the ps command which need to read the /proc/pid/
-cmdline. Our monitor service which needs to read /proc/pid/cmdline
used to be blocked for 5 mins.
This patch frees the blocks back to buddy after commit and then do
discard in a async kworker context in fstrim fashion, namely,
- mark blocks to be discarded as used if they have not been allocated
- do discard
- mark them free
After this, jbd2 commit kthread won't be blocked any more by discard
and we won't get NOSPC even if the discard is slow or throttled.
Link: https://marc.info/?l=linux-kernel&m=162143690731901&w=2
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Link: https://lore.kernel.org/r/20210830075246.12516-5-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmTZcACgkQnJ2qBz9k
QNkkmAgArW6XoF1CePds/ZaC9vfg/nk66/zVo0n+J8xXjMWAPxcKbWFfV0uWVixq
yk4lcLV47a2Mu/B/1oLNd3vrSmhwU+srWqNwOFn1nv+lP/6wJqr8oztRHn/0L9Q3
ZSRrukSejbQ6AvTL/WzTNnCjjCc2ne3Kyko6W41aU6uyJuzhSM32wbx7qlV6t54Z
iint9OrB4gM0avLohNafTUq6I+tEGzBMNwpCG/tqCmkcvDcv3rTDVAnPSCTm0Tx2
hdrYDcY/rLxo93pDBaW1rYA/fohR+mIVye6k2TjkPAL6T1x+rxeT5qnc+YijH5yF
sFPDhlD+ZsfOLi8stWXLOJ+8+gLODg==
=pDBR
-----END PGP SIGNATURE-----
Merge tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs hole punching vs cache filling race fixes from Jan Kara:
"Fix races leading to possible data corruption or stale data exposure
in multiple filesystems when hole punching races with operations such
as readahead.
This is the series I was sending for the last merge window but with
your objection fixed - now filemap_fault() has been modified to take
invalidate_lock only when we need to create new page in the page cache
and / or bring it uptodate"
* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
filesystems/locking: fix Malformed table warning
cifs: Fix race between hole punch and page fault
ceph: Fix race between hole punch and page fault
fuse: Convert to using invalidate_lock
f2fs: Convert to using invalidate_lock
zonefs: Convert to using invalidate_lock
xfs: Convert double locking of MMAPLOCK to use VFS helpers
xfs: Convert to use invalidate_lock
xfs: Refactor xfs_isilocked()
ext2: Convert to using invalidate_lock
ext4: Convert to use mapping->invalidate_lock
mm: Add functions to lock invalidate_lock for two mappings
mm: Protect operations adding pages to page cache with invalidate_lock
documentation: Sync file_operations members with reality
mm: Fix comments mentioning i_mutex
All callers already have a dax_device obtained from fs_dax_get_by_bdev
at hand, so just pass that to dax_supported() insted of doing another
lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210826135510.6293-10-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There is no functional change in this patch but just split the
codes, which serachs free block and does trim, into a new function
ext4_try_to_trim_range. This is preparing for the following async
backgroup discard.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-3-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Get rid of the 'group' parameter of ext4_trim_extent as we can get
it from the 'e4b'.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Wang Jianchao <wangjianchao@kuaishou.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210724074124.25731-2-jianchao.wan9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit b5776e7524 ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split. Fix this to avoid directory htree corruptions
when using the large_dir feature.
Cc: stable@kernel.org # v5.11
Cc: Благодаренко Артём <artem.blagodarenko@gmail.com>
Fixes: b5776e7524 ("ext4: fix potential htree index checksum corruption)
Reported-by: Denis <denis@voxelsoft.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.
Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks. This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).
For more details, see the commit which added fscrypt_symlink_getattr().
Fixes: f348c25232 ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
We do a bforget and return for no journal case, so let's remove this
conflict comment.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn>
Link: https://lore.kernel.org/r/20210714055940.1553705-1-guoqing.jiang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
if (!ext4_has_feature_mmp(sb)) then retval can be unitialized before
we jump to the wait_to_exit label.
Fixes: 61bb4a1c41 ("ext4: fix possible UAF when remounting r/o a mmp-protected file system")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210713022728.2533770-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Convert ext4 to use mapping->invalidate_lock instead of its private
EXT4_I(inode)->i_mmap_sem. This is mostly search-and-replace. By this
conversion we fix a long standing race between hole punching and read(2)
/ readahead(2) paths that can lead to stale page cache contents.
CC: <linux-ext4@vger.kernel.org>
CC: Ted Tso <tytso@mit.edu>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDnU2AACgkQ8vlZVpUN
gaOBIAgApIAIeGbppf7aFjRN4h4wxfRpr7w6lux3GVmz7D+6djRi21X5dT5xq01m
u6DkLAcKrCATIidyP6qHlvBbxxcPt2PX1FcQbruj9WcnSng1Ngl7RW8BEqp/eIRo
Nb7MY0pg8HIJVMEniWQcdEjFWKDL3ksWR9+X3V3nhSzp+0kXFF1ySjk+TWi/ZGSn
T/Q1sEyeUOiVfV75cIW5JbKoJEgvCvrclFvGJLYVcIAYeqJfQKQ0+tlkhDeYnWfQ
nZgh1UU350bO629LGIhbRAkLbAloEb0d57mOQCrATo0JFrAZ52+0ZCkrTXtIyoOF
TUILVf3zsqgdO8HLDkbH1G+lGn9WOA==
=qU+W
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: inline jbd2_journal_[un]register_shrinker()
ext4: fix flags validity checking for EXT4_IOC_CHECKPOINT
ext4: fix possible UAF when remounting r/o a mmp-protected file system
ext4: use ext4_grp_locked_error in mb_find_extent
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock
Revert "ext4: consolidate checks for resize of bigalloc into ext4_resize_begin"
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted. On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.
Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy(). This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.
Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.
Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 618f003199 ("ext4: fix memory leak in
ext4_fill_super"), after the file system is remounted read-only, there
is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to
point at freed memory, which the call to ext4_stop_mmpd() can trip
over.
Fix this by only allowing kmmpd() to exit when it is stopped via
ext4_stop_mmpd().
Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu
Reported-by: Ye Bin <yebin10@huawei.com>
Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Commit 5d1b1b3f49 ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.
Fixes: 43c73221b3 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If a writeback of the superblock fails with an I/O error, the buffer
is marked not uptodate. However, this can cause a WARN_ON to trigger
when we attempt to write superblock a second time. (Which might
succeed this time, for cerrtain types of block devices such as iSCSI
devices over a flaky network.)
Try to detect this case in flush_stashed_error_work(), and also change
__ext4_handle_dirty_metadata() so we always set the uptodate flag, not
just in the nojournal case.
Before this commit, this problem can be repliciated via:
1. dmsetup create dust1 --table '0 2097152 dust /dev/sdc 0 4096'
2. mount /dev/mapper/dust1 /home/test
3. dmsetup message dust1 0 addbadblock 0 10
4. cd /home/test
5. echo "XXXXXXX" > t
After a few seconds, we got following warning:
[ 80.654487] end_buffer_async_write: bh=0xffff88842f18bdd0
[ 80.656134] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 85.774450] EXT4-fs error (device dm-0): ext4_check_bdev_write_error:193: comm kworker/u16:8: Error while async write back metadata
[ 91.415513] mark_buffer_dirty: bh=0xffff88842f18bdd0
[ 91.417038] ------------[ cut here ]------------
[ 91.418450] WARNING: CPU: 1 PID: 1944 at fs/buffer.c:1092 mark_buffer_dirty.cold+0x1c/0x5e
[ 91.440322] Call Trace:
[ 91.440652] __jbd2_journal_temp_unlink_buffer+0x135/0x220
[ 91.441354] __jbd2_journal_unfile_buffer+0x24/0x90
[ 91.441981] __jbd2_journal_refile_buffer+0x134/0x1d0
[ 91.442628] jbd2_journal_commit_transaction+0x249a/0x3240
[ 91.443336] ? put_prev_entity+0x2a/0x200
[ 91.443856] ? kjournald2+0x12e/0x510
[ 91.444324] kjournald2+0x12e/0x510
[ 91.444773] ? woken_wake_function+0x30/0x30
[ 91.445326] kthread+0x150/0x1b0
[ 91.445739] ? commit_timeout+0x20/0x20
[ 91.446258] ? kthread_flush_worker+0xb0/0xb0
[ 91.446818] ret_from_fork+0x1f/0x30
[ 91.447293] ---[ end trace 66f0b6bf3d1abade ]---
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20210615090537.3423231-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 in 5.14:
- Allow applications to poll on changes to /sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDcjRgACgkQ8vlZVpUN
gaMAMQgAjRYUQ+tdJVZzInFwukudhgLyuCP9AdCx76fisaH22yNCakQ7M2XGz59i
/YbJerLaueYpHZzpA9p5+sSjVhMwILO3scBSJbOwdsbrFAsFLzcgQKQhGGqK2KvX
IAOEArC8/hm1wnVb7sfQYdBHlWyeJpI8hd/8WZPlYtySlRnP1TZCd+X7y7lmNs1H
QU1KECwstI2t8Lug0QeKx2B9PI9AWcCs0lTJ4LfcANZAh3HIJi9aUCk4SFDRkf3/
8AazvMqTHJD9yc+BNyZOro2ykDFCStkNqf0cDYTzvKrr66CHScPUtyI0oAEdspxN
+SNNARPGZgNOuR3ZRbGivtwgEB+GpQ==
=jSd4
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"In addition to bug fixes and cleanups, there are two new features for
ext4 in 5.14:
- Allow applications to poll on changes to
/sys/fs/ext4/*/errors_count
- Add the ioctl EXT4_IOC_CHECKPOINT which allows the journal to be
checkpointed, truncated and discarded or zero'ed"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits)
jbd2: export jbd2_journal_[un]register_shrinker()
ext4: notify sysfs on errors_count value change
fs: remove bdev_try_to_free_page callback
ext4: remove bdev_try_to_free_page() callback
jbd2: simplify journal_clean_one_cp_list()
jbd2,ext4: add a shrinker to release checkpointed buffers
jbd2: remove redundant buffer io error checks
jbd2: don't abort the journal when freeing buffers
jbd2: ensure abort the journal if detect IO error when writing original buffer back
jbd2: remove the out label in __jbd2_journal_remove_checkpoint()
ext4: no need to verify new add extent block
jbd2: clean up misleading comments for jbd2_fc_release_bufs
ext4: add check to prevent attempting to resize an fs with sparse_super2
ext4: consolidate checks for resize of bigalloc into ext4_resize_begin
ext4: remove duplicate definition of ext4_xattr_ibody_inline_set()
ext4: fsmap: fix the block/inode bitmap comment
ext4: fix comment for s_hash_unsigned
ext4: use local variable ei instead of EXT4_I() macro
ext4: fix avefreec in find_group_orlov
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
...
The function ext4_resize_begin() gets called from three different
places, and online resize for bigalloc file systems is disallowed from
the old-style online resize (EXT4_IOC_GROUP_ADD and
EXT4_IOC_GROUP_EXTEND), but it *is* supposed to be allowed via
EXT4_IOC_RESIZE_FS.
This reverts commit e9f9f61d0c.
After s_error_count is incremented, signal the change in the
corresponding sysfs attribute via sysfs_notify. This allows userspace to
poll() on changes to /sys/fs/ext4/*/errors_count.
[ Moved call of ext4_notify_error_sysfs() to flush_stashed_error_work()
to avoid BUG's caused by calling sysfs_notify trying to sleep after
being called from an invalid context. -- TYT ]
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Link: https://lore.kernel.org/r/20210611140209.28903-1-jonathan.davies@nutanix.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After we introduce a jbd2 shrinker to release checkpointed buffer's
journal head, we could free buffer without bdev_try_to_free_page()
under memory pressure. So this patch remove the whole
bdev_try_to_free_page() callback directly. It also remove many
use-after-free issues relate to it together.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-8-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Current metadata buffer release logic in bdev_try_to_free_page() have
a lot of use-after-free issues when umount filesystem concurrently, and
it is difficult to fix directly because ext4 is the only user of
s_op->bdev_try_to_free_page callback and we may have to add more special
refcount or lock that is only used by ext4 into the common vfs layer,
which is unacceptable.
One better solution is remove the bdev_try_to_free_page callback, but
the real problem is we cannot easily release journal_head on the
checkpointed buffer, so try_to_free_buffers() cannot release buffers and
page under memory pressure, which is more likely to trigger
out-of-memory. So we cannot remove the callback directly before we find
another way to release journal_head.
This patch introduce a shrinker to free journal_head on the checkpointed
transaction. After the journal_head got freed, try_to_free_buffers()
could free buffer properly.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210610112440.3438139-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_ext_grow_indepth will add a new extent block which has init the
expected content. We can mark this buffer as verified so to stop a
useless check in __read_extent_tree_block.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210609075545.1442160-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The in-kernel ext4 resize code doesn't support filesystem with the
sparse_super2 feature. It fails with errors like this and doesn't finish
the resize:
EXT4-fs (loop0): resizing filesystem from 16640 to 7864320 blocks
EXT4-fs warning (device loop0): verify_reserved_gdb:760: reserved GDT 2 missing grp 1 (32770)
EXT4-fs warning (device loop0): ext4_resize_fs:2111: error (-22) occurred during file system resize
EXT4-fs (loop0): resized filesystem to 2097152
To reproduce:
mkfs.ext4 -b 4096 -I 256 -J size=32 -E resize=$((256*1024*1024)) -O sparse_super2 ext4.img 65M
truncate -s 30G ext4.img
mount ext4.img /mnt
python3 -c 'import fcntl, os, struct ; fd = os.open("/mnt", os.O_RDONLY | os.O_DIRECTORY) ; fcntl.ioctl(fd, 0x40086610, struct.pack("Q", 30 * 1024 * 1024 * 1024 // 4096), False) ; os.close(fd)'
dmesg | tail
e2fsck ext4.img
The userspace resize2fs tool has a check for this case: it checks if the
filesystem has sparse_super2 set and if the kernel provides
/sys/fs/ext4/features/sparse_super2. However, the former check requires
manually reading and parsing the filesystem superblock.
Detect this case in ext4_resize_begin and error out early with a clear
error message.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/74b8ae78405270211943cd7393e65586c5faeed1.1623093259.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_xattr_ibody_inline_set() & ext4_xattr_ibody_set() have the exact
same definition. Hence remove ext4_xattr_ibody_inline_set() and all
its call references. Convert the callers of it to call
ext4_xattr_ibody_set() instead.
[ Modified to preserve ext4_xattr_ibody_set() and remove
ext4_xattr_ibody_inline_set() instead. -- TYT ]
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/fd566b799bbbbe9b668eb5eecde5b5e319e3694f.1622685482.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The cache_cnt parameter of tracepoint ext4_es_shrink_exit means the
remaining cache count after shrink, but now it is the cache count before
shrink, fix it by read sbi->s_extent_cache_cnt again.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After converting fs shrinkers to new scan/count API, we are no longer
pass zero nr_to_scan parameter to detect the number of objects to free,
just remove this check.
Fixes: 1ab6c4997e ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the ext4_dx_add_entry function, the at variable is assigned but will
reset just after “again:” label. So delete the unnecessary assignment.
this will not chang the logic.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Link: https://lore.kernel.org/r/1621493752-36890-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ioctl EXT4_IOC_CHECKPOINT checkpoints and flushes the journal. This
includes forcing all the transactions to the log, checkpointing the
transactions, and flushing the log to disk. This ioctl takes u32 "flags"
as an argument. Three flags are supported. EXT4_IOC_CHECKPOINT_FLAG_DRY_RUN
can be used to verify input to the ioctl. It returns error if there is any
invalid input, otherwise it returns success without performing
any checkpointing. The other two flags, EXT4_IOC_CHECKPOINT_FLAG_DISCARD
and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT, can be used to issue requests to
discard or zeroout the journal logs blocks, respectively. At this
point, EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT is primarily added to enable
testing of this codepath on devices that don't support discard.
EXT4_IOC_CHECKPOINT_FLAG_DISCARD and EXT4_IOC_CHECKPOINT_FLAG_ZEROOUT
cannot both be set.
Systems that wish to achieve content deletion SLO can set up a daemon
that calls this ioctl at a regular interval such that it matches with the
SLO requirement. Thus, with this patch, the ext4_dir_entry2 wipeout
patch[1], and the Ext4 "-o discard" mount option set, Ext4 can now
guarantee that all file contents, file metatdata, and filenames will not
be accessible through the filesystem and will have had discard or
zeroout requests issued for corresponding device blocks.
The __jbd2_journal_erase function could also be used to discard or
zero-fill the journal during journal load after recovery. This would
provide a potential solution to a journal replay bug reported earlier this
year[2]. After a successful journal recovery, e2fsck can call this ioctl to
discard the journal as well.
[1] https://lore.kernel.org/linux-ext4/YIHknqxngB1sUdie@mit.edu/
[2] https://lore.kernel.org/linux-ext4/YDZoaacIYStFQT8g@mit.edu/
Link: https://lore.kernel.org/r/20210518151327.130198-2-leah.rumancik@gmail.com
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a flags argument to jbd2_journal_flush to enable discarding or
zero-filling the journal blocks while flushing the journal.
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Link: https://lore.kernel.org/r/20210518151327.130198-1-leah.rumancik@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit c89128a008 ("ext4: handle errors on
ext4_commit_super"), 'ret' may be set to 0 before calling
ext4_fill_flex_info(), if ext4_fill_flex_info() fails ext4_mount()
doesn't return error code, it makes 'root' is null which causes crash
in legacy_get_tree().
Fixes: c89128a008 ("ext4: handle errors on ext4_commit_super")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210510111051.55650-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_orphan_cleanup(), if ext4_truncate() failed to get a transaction
handle, it didn't remove the inode from the in-core orphan list, which
may probably trigger below error dump in ext4_destroy_inode() during the
final iput() and could lead to memory corruption on the later orphan
list changes.
EXT4-fs (sda): Inode 6291467 (00000000b8247c67): orphan list check failed!
00000000b8247c67: 0001f30a 00000004 00000000 00000023 ............#...
00000000e24cde71: 00000006 014082a3 00000000 00000000 ......@.........
0000000072c6a5ee: 00000000 00000000 00000000 00000000 ................
...
This patch fix this by cleanup in-core orphan list manually if
ext4_truncate() return error.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210507071904.160808-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
static int kthread(void *_create) will return -ENOMEM
or -EINTR in case of internal failure or
kthread_stop() call happens before threadfn call.
To prevent fancy error checking and make code
more straightforward we moved all cleanup code out
of kmmpd threadfn.
Also, dropped struct mmpd_data at all. Now struct super_block
is a threadfn data and struct buffer_head embedded into
struct ext4_sb_info.
Reported-by: syzbot+d9e482e303930fa4f6ff@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210430185046.15742-1-paskripkin@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Variable error is set to zero but this value is never read as it's not
used later on, hence it is a redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/ext4/ioctl.c:657:3: warning: Value stored to 'error' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619691409-83160-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now set_buffer_uptodate() will test first and then set, so we don't have
to check buffer_uptodate() first, remove it to simplify code.
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619418587-5580-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A code in iomap alloc may overflow block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.
Cc: stable@kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210412102333.2676-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmC82AQACgkQ8vlZVpUN
gaOkAgf+KH57P/P0sB6aVBHpAzqa9jTKJWMA5kpCqYUDkYlfF7n2hwsjMzWpJ5MY
ZvFpKAflmRnve/ULUZQX6+zrcbieNs3e+6VFZrZ0PmxN0dupyISLY7jnvCRDleA7
BFO34AcH+QEst9zXJmgta9eoy3LA8sawhQ/d7ujVY+IRFk40m26fuAMiaGznlQJ5
dmrx7pHZWKFIDFIg2TdFlP+Voqbxs2VTT16gmWpGBdTyWYHKjbSOLKJFc9DwYeE9
aANf6iIzwXz7y9pZiOnTrGuKDEJcIZNESkbIqw62YgqsoObLbsbCZNmNcqxyHpYQ
Mh3L59KtmjANW3iOxQfyxkNTugxchw==
=BSnf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
ext4: fix no-key deletion for encrypt+casefold
ext4: fix memory leak in ext4_fill_super
ext4: fix fast commit alignment issues
ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed
ext4: fix accessing uninit percpu counter variable with fast_commit
ext4: fix memory leak in ext4_mb_init_backend on error path.
commit 471fbbea7f ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.
This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:
W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key
Repro steps in kvm-xfstests test appliance:
mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
mount /vdc
mkdir /vdc/dir
chattr +F /vdc/dir
keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
xfs_io -c "set_encpolicy $keyid" /vdc/dir
for i in `seq 1 100`; do
mkdir /vdc/dir/$i
done
xfs_io -c "rm_enckey $keyid" /vdc
rm -rf /vdc/dir # fails with the bug
Fixes: 471fbbea7f ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.
If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.
This can easily be reproduced by calling an infinite loop of:
systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount
... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.
Fixes: ce40733ce9 ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec11 ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.
Cc: stable@kernel.org
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975] ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368] ext4_find_extent+0x300/0x330 [ext4]
[130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995] ext4_readpage+0x54/0x100 [ext4]
[130747.337359] generic_file_buffered_read+0x410/0xae8
[130747.337767] generic_file_read_iter+0x114/0x190
[130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556] __vfs_read+0x11c/0x188
[130747.338851] vfs_read+0x94/0x150
[130747.339110] ksys_read+0x74/0xf0
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When running generic/527 with fast_commit configuration, the following
issue is seen on Power. With fast_commit, during ext4_fc_replay()
(which can be called from ext4_fill_super()), if inode eviction
happens then it can access an uninitialized percpu counter variable.
This patch adds the check before accessing the counters in
ext4_free_inode() path.
[ 321.165371] run fstests generic/527 at 2021-04-29 08:38:43
[ 323.027786] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: block_validity. Quota mode: none.
[ 323.618772] BUG: Unable to handle kernel data access on read at 0x1fbd80000
[ 323.619767] Faulting instruction address: 0xc000000000bae78c
cpu 0x1: Vector: 300 (Data Access) at [c000000010706ef0]
pc: c000000000bae78c: percpu_counter_add_batch+0x3c/0x100
lr: c0000000006d0bb0: ext4_free_inode+0x780/0xb90
pid = 5593, comm = mount
ext4_free_inode+0x780/0xb90
ext4_evict_inode+0xa8c/0xc60
evict+0xfc/0x1e0
ext4_fc_replay+0xc50/0x20f0
do_one_pass+0xfe0/0x1350
jbd2_journal_recover+0x184/0x2e0
jbd2_journal_load+0x1c0/0x4a0
ext4_fill_super+0x2458/0x4200
mount_bdev+0x1dc/0x290
ext4_mount+0x28/0x40
legacy_get_tree+0x4c/0xa0
vfs_get_tree+0x4c/0x120
path_mount+0xcf8/0xd70
do_mount+0x80/0xd0
sys_mount+0x3fc/0x490
system_call_exception+0x384/0x3d0
system_call_common+0xec/0x278
Cc: stable@kernel.org
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/6cceb9a75c54bef8fa9696c1b08c8df5ff6169e2.1619692410.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin