In one of the iWave-G22D development board variants, called Generic SODIMM
Development Platform, we have an LCD with touchscreen. The resistive touch
controller, STMPE811 is on the development board and is connected through
the i2c5 of the RZ-G1E.
Additionally, this controller should generate an interrupt to the CPU and
it is connected through GPIO4,4 to the GIC.
Touch was tested with one of our iW-RainboW-G22D-SODIMM RZ/G1E development
platforms.
More details on the iWave website:
https://www.iwavesystems.com/rz-g1e-sodimm-development-kit.html
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1583336650-25848-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the Generic SODIMM Development Platform there is an RGB LCD panel
directly connected to the DU output. It uses the TPU0 as backlight, one
GPIO pull-up configuration for power enable, R[2:7], G[2:7], B[2:7],
VSYNC, HSYNC, DU0_DISP and, DU0_CLK as inputs.
There is no encoder between the DU and the panel, therefore the default
connector driver is used.
The two variants of the iW-G22D should be mutually exclusive, therefore
this patch also disables the RGB LCD display when the HDMI extension board
is used.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1583239490-8837-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To improve human readability and enable automatic validation, the tuples
in the "states" properties of device nodes compatible with
"regulator-gpio" should be grouped, as reported by "make dtbs_check":
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: Additional items are not allowed (1800000, 0 were unexpected)
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi0: states:0: [3300000, 1, 1800000, 0] is too long
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: Additional items are not allowed (1800000, 0 were unexpected)
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi1: states:0: [3300000, 1, 1800000, 0] is too long
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: Additional items are not allowed (1800000, 0 were unexpected)
arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: regulator-vccq-sdhi2: states:0: [3300000, 1, 1800000, 0] is too long
...
Fix this by grouping the tuples using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191213164115.3697-2-geert+renesas@glider.be
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Convert bootargs from ip=dhcp to ip=on
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable sound PIO support on carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables CAN0 interface exposed through connector J15 on the
carrier board.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Improve the layout of r8a7745-iwg22d-sodimm.dts by sorting the
nodes alphabetically.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for HSCIF1 as /dev/ttySC5, keeping the same naming
scheme adopted by iWave in their BSP release. This interface
uses RTS/CTS.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The BSP release from iWave uses /dev/ttySC3 as debug console, this patch
renames the alias accordingly for compatibility.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers
attached to them.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the iWave RainboW-G22D board dependent part of the Ethernet
AVB device node.
On some older versions of the platform (before R4.0) the phy address
may be 1 or 3. The address is fixed to 3 for R4.0 onwards (which
will be the first mainstream release), hence using 3 in the dts.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add support for iWave RainboW-G22D-SODIMM board based on RZ/G1E.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Marian-Cristian Rotariu