Commit Graph

449 Commits

Author SHA1 Message Date
Dave Airlie 138f9ebb97 drm: add tile_group support. (v3)
A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.

DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.

v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.

v3: fix missing unlock.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-09 09:56:46 +10:00
Gustavo Padovan ecb7e16bf1 drm: add helper to get crtc timings (v5)
We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.

Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were
previously making adjustments for doublescan modes and vscan > 1 modes,
which was incorrect.  Using our new helper fixes this mistake.

v2 (by Matt): Use new stereo doubling function (suggested by Ville)

v3 (by Matt):
 - Add missing kerneldoc (Daniel)
 - Use drm_mode_copy() (Jani)

v4 (by Matt):
 - Drop stereo doubling function again; add 'stereo only' flag
   to drm_mode_set_crtcinfo() instead (Ville)

v5 (by Matt):
 - Note behavioral change in drm_crtc_check_viewport() and
   intel_modeset_pipe_config(). (Ander)
 - Describe new adjustment flags in drm_mode_set_crtcinfo()'s
   kerneldoc. (Ander)

Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05 21:20:25 +01:00
Daniel Vetter abd69c55dd drm: Handle atomic state properly in kms getfoo ioctl
So the problem with async commit (especially async modeset commit) is
that the legacy pointers only get updated after the point of no
return, in the async part of the modeset sequence. At least as
implemented by the current helper functions. This is done in the
set_routing_links function in drm_atomic_helper.c.

Which also means that access isn't protected by locks but only
coordinated by synchronizing with async workers. No problem thus far,
until we lock at the getconnector/encoder ioctls.

So fix this up by adding special cases for atomic drivers: For those
we need to look at state objects. Unfortunately digging out the
correct encoder->crtc link is a bit of work, so wrap this up in a
helper function.

Moving the assignments of connector->encoder and encoder->crtc earlier
isn't a good idea because the point of the atomic helpers is that we
stage the state updates. That way the disable functions can still
inspect the links and rely upon them.

v2: Extract full encoder->crtc lookup into helper (Rob).

v3: Extract drm_connector_get_encoder too since - we need to always
return state->best_encoder when there is a state otherwise we might
return stale data if there's a pending async disable (and chase
unlocked pointers, too). Same issue with encoder_get_crtc but there
it's a bit more tricky to handle.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Lightly-Tested-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-27 15:39:11 +01:00
Rob Clark 933f622fc2 drm: use mode_object_find helpers
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-27 15:39:10 +01:00
Thierry Reding 3009c0377f drm: Free atomic state during cleanup
The current state of CRTCs, planes and connectors currently leaks during
DRM driver ->unload() unless drivers explicitly clean it up. Since there
is nothing driver-specific about it, that cleanup can be done within the
DRM core.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-25 13:28:31 +01:00
Daniel Vetter 3758b34193 drm: s/enum_blob_list/enum_list/ in drm_property
I guess for hysterical raisins this was meant to be the way to read
blob properties. But that's done with the two-stage approach which
uses separate blob kms object and the special-purpose get_blob ioctl.

Shipping userspace seems to have never relied on this, and the kernel
also never put any blob thing onto that property. And nowadays it
would blow up, e.g. in drm_property_destroy. Also it makes no sense to
return values in an ioctl that only returns metadata about everything.

So let's ditch all the internal code for the blob list, rename the
list to be unambiguous and sprinkle comments all over the place to
explain this peculiar piece of api.

v2: Squash in fixup from Rob to remove now unused variables.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20 11:35:21 +10:00
Daniel Vetter 1a49863349 drm/crtc: Polish kerneldoc
- Make it clear that it's a negative errno (more in line with
  everything else).
- Clean up the confusion around get_properties vs. getproperty ioctls:
  One reads per-obj property values, the other reads property
  metadata.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20 11:35:20 +10:00
Daniel Vetter c7eb76f493 drm/atomic: Ensure that drm_connector_index is stable
I've totally forgotten that with DP MST connectors can now be
hotplugged. And failed to adapt Rob's drm_atomic_state code (which
predates connector hotplugging) to the new realities.

The first step is to make sure that the connector indices used to
access the arrays of pointers are stable. The connection mutex gives
us enough guarantees for that, which means we won't unecessarily block
on concurrent modesets or background probing.

So add a locking WARN_ON and shuffle the code slightly to make sure we
always hold the right lock.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20 11:35:18 +10:00
Dave Airlie ca5a71de48 drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers erroneously treat the .pitch and .size fields of struct
 drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
 header has a comment denoting them as outputs, that seemingly wasn't
 enough to make drivers use them properly.
 
 The result is that some userspace doesn't explicitly zero out those
 fields, assuming that the kernel won't use them. That causes problems
 since the data within the structure might be uninitialized, so bogus
 data may end up confusing drivers (ridiculously large values for the
 pitch, ...).
 
 This series attempts to improve the situation by fixing all drivers to
 not use the output fields. Furthermore to spare new drivers this bad
 surprise, the DRM core now zeros out these fields prior to handing the
 data structure to the driver.
 
 Lessons learned from this are that future IOCTLs should be properly
 documented (in the DRM DocBook for example) and should be rigorously
 defined. To prevent misuse like this, userspace should be required to
 zero out all output fields. The kernel should check for this and fail
 if that's not the case.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUZKbcAAoJEN0jrNd/PrOh57QQAKdX7ASd4XVhMC6fuVGXHUXI
 HVZuJ3Own+e3aAJKhZ2DZ263+PtBLfe3+eEF1WRWqZcDu647Nj3wSV64celdZdIl
 WHU2RokxneHTPHlttZ+MLhVwtzSddO8712iLU/2B7Rg/MNlN9tv9tbRtGqPWwlzg
 IZNAdU5etnm+YDYil8/I8f84+5vT59Z/X2NHbq+jReD3V6I2WBAK6zlRIy4o54io
 fccK7M6+uGlbNmtPwoKXufeiqTxxdYYelZoQzO4NjWEhdU0LoUnTFdfqISSdt3HV
 26NwTmqVTx38AD5bGwot2b1VFEkja5tkP7G+DeFkj0DRHbFfAQK/tNeqdf9xq4gQ
 UEVjljyEW6dauibtT6ASk2RoTmQmMVWw44aSulcaz6eVqa21zpEwOZVMX/VW3QM+
 vKh4Vy6eVbCHmdOiXgtQSexQAN6uO1o9cHEGamJQpMshm+kax9T7hBdcHMH0ORtL
 uEYHXzqB/bbkhAodHTraoZ5aM8YFwS2TgGtCJoYw1GHehMhjpJG9HaDlL50lkObk
 LDUShta8AwN9iu3/qmkaYaxkbBPEnRtU9d9qO6S1NsZugBmmEUj6lNKFOK13U9Ho
 vjKWTpB4USgKdrTwJXEAXJTBmubwrPBnZb1vdCovCtC3JS7sXUH8AM/E6tp4Q0Go
 idGCjMglaSFO8EUeScFT
 =QZIW
 -----END PGP SIGNATURE-----

Merge tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next

drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input

Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.

The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).

This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.

Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.

* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
  drm/cma: Remove call to drm_gem_free_mmap_offset()
  drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
  drm/rcar: gem: dumb: pitch is an output
  drm/omap: gem: dumb: pitch is an output
  drm/cma: Introduce drm_gem_cma_dumb_create_internal()
  drm/doc: Add GEM/CMA helpers to kerneldoc
  drm/doc: mm: Fix indentation
  drm/gem: Fix a few kerneldoc typos
2014-11-15 09:50:21 +10:00
Dave Airlie 5bb2bbf596 drm: add properties for suggested x/y offset for connectors. (v2)
Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.

v2: rename properties to be more consistent.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-15 09:43:23 +10:00
Daniel Vetter baf698b049 drm: Simplify return value handling in drm_crtc.c
While looking through drm_crtc.c to double-check make locking changes
I've noticed that there's a few other places that would now benefit
from simplified return value handling.

So let's flatten the control flow and replace and always 0 ret with 0
where possible.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-15 09:40:33 +10:00
Dave Airlie 4fb2ac6ebe drm: Miscellaneous fixes for v3.19-rc1
This is a small collection of fixes that I've been carrying around for a
 while now. Many of these have been posted and reviewed or acked. The few
 that haven't I deemed too trivial to bother.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUZKenAAoJEN0jrNd/PrOhNwkQAJTGxhol/k0Vj+P+HVj+MROU
 9EEw67mh/c2Y4zQxEmWRE/rHdIgoz4zPL5hoJLLjPmorvKil6BIfURUybxYu9n3b
 MrunoA7adxvL+Uce+XMkuvWUE2fxFNaEwU+FT66Ib+Lo8A25FZXBqo125/RmhAHZ
 EQKcr0MBH76jybYoyB1H1pf/O3i6qODmh3kXT4Fved3jf5mZNPl5wgCSSr/4ilOZ
 wx3pzG3BvIrsyvGF6Q0oAjDEbaBTOhglfAvPFhC16cfhtPJMzVvx6v/abtipMjRv
 pUY3t96BvL1pyszcEc/ykjDX/ODlY00uOe1GgRSSXS/bThF0HJP14rTpjO+6ycON
 rap17o2feRuK3c2NzLMqv4bjkaNF/ut+2YnByulJWnpg1dDjIpJOzJ6Heep5D6+H
 lV5QP0B9LGI4718le2tv5hkH0NnQygiyRlACRzLBpq9gnXuSoSZYxjo6SuVid1X8
 Ebs+QKNoTl1NEYeEvT/CnC552MdWzntcNjE9SA1yj0RgrIS87x8bmXqh/zAwa2dI
 1Lq1wZ965ruDUPCGrd6jE8JiiEEXJjJr0y6zA4LBnR+OvmR/2GN7KCwjX+jwBthq
 9dyO9YEnxSXT/dFEUumx3F4ZKcPUntT61pT6ZblIljiJ5vw6SegDXdWDc+eZ4QyD
 y2YyxRL+KxPftkeyfU4j
 =OUaP
 -----END PGP SIGNATURE-----

Merge tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next

drm: Miscellaneous fixes for v3.19-rc1

This is a small collection of fixes that I've been carrying around for a
while now. Many of these have been posted and reviewed or acked. The few
that haven't I deemed too trivial to bother.

* tag 'drm/fixes/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
  video/hdmi: Relicense header under MIT license
  drm/gma500: mdfld: Reuse video/mipi_display.h
  drm: Make drm_mode_create_tv_properties() signature consistent
  drm: Implement drm_get_pci_dev() dummy for !PCI
  drm/prime: Use unsigned type for number of pages
  drm/gem: Fix typo in kerneldoc
  drm: Use const data when creating blob properties
  drm: Use size_t for blob property sizes
2014-11-15 09:37:20 +10:00
Thierry Reding f60859522a drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers treat the pitch and size fields as inputs and will use them
as minima provided by userspace so that they are only overwritten if the
minimal requirements of the driver exceed them.

This can cause strange behaviour when applications don't zero out these
fields, causing whatever was on the stack to be passed to the IOCTL. In
a typical case this would become visible as a failed allocation if the
pitch or size were unusually high. But this could also cause more subtle
bugs like overallocating dumb framebuffers.

To prevent drivers from misusing these values, make the DRM core zero
out the pitch and size fields before passing the structure to the driver
implementation.

While at it, also set the output handle field to zero for good measure,
even though it's less likely to be abused.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:27:29 +01:00
Thierry Reding 2f7633125a drm: Make drm_mode_create_tv_properties() signature consistent
The prototype and the function implementation differ in their signature.
Make them consistent and use an unsigned integer for the number of modes
while at it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 10:43:51 +01:00
Thierry Reding 12e6cecd55 drm: Use const data when creating blob properties
Creating a blob property will always copy the input data so the data
that is passed in can be const.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 10:43:49 +01:00
Thierry Reding ecbbe59bbb drm: Use size_t for blob property sizes
size_t is the standard type when dealing with sizes of all kinds. Use it
consistently when instantiating DRM blob properties.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 10:43:48 +01:00
Daniel Vetter fcf93f6948 drm: More specific locking for get* ioctls
Motivated by the per-plane locking I've gone through all the get*
ioctls and reduced the locking to the bare minimum required.

v2: Rebase and make it compile ...

v3: Review from Sean:
- Simplify return handling in getplane_res.
- Add a comment to getplane_res that the plane list is invariant and
  can be walked locklessly.

v4: Actually git add.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-12 17:56:34 +10:00
Daniel Vetter 4d02e2de0e drm: Per-plane locking
Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:

- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
  justification as for the equivalent change in drm_crtc_init done in

	commit d0fa1af40e
	Author: Daniel Vetter <daniel.vetter@ffwll.ch>
	Date:   Mon Sep 8 09:02:49 2014 +0200

	    drm: Drop modeset locking from crtc init function

  Without these the drm_modeset_lock_init would fall over the exact
  same way.

- Since the atomic core code wraps the locking switching it to
  per-plane locks was a one-line change.

- For the legacy ioctls add a plane argument to the locking helper so
  that we can grab the right plane lock (cursor or primary). Since the
  universal cursor plane might not be there, or someone really crazy
  might forgoe the primary plane even accept NULL.

- Add some locking WARN_ON to the atomic helpers for good paranoid
  measure and to check that it all works out.

Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.

v2: I've forgotten about the load-detect code in i915.

v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to

commit 21e88620aa
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu Oct 30 13:39:04 2014 -0400

    drm/vmwgfx: fix lock breakage

Rebased and fix this up.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-12 17:56:12 +10:00
Dave Airlie cc7096fb6d drm/mode: document path property and function to set it. (v1.1)
These two didn't get documented properly, do so.

Pointed out by Daniel.

v1.1: add missing boilerplate (Daniel)

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-10 10:21:14 +10:00
Damien Lespiau 3b5b9932fb drm: Add a note to drm_property_create() about property lifetime
Cc: Chandra Konduru <chandra.konduru@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-31 18:38:13 +01:00
Masanari Iida 5a1cbdb0fb gpu: drm: Fix warning caused by a parameter description in drm_crtc.c
This patch fix following error while "make xmldocs"

Warning(.//drivers/gpu/drm/drm_crtc.c:778): Excess function parameter
 'mode' description in 'drm_connector_get_cmdline_mode'

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-23 10:12:18 +02:00
Chuck Ebbert 228f2cb32f drm/crtc: Remove duplicated ioctl code
Make drm_mode_add_fb() call drm_mode_add_fb2() after converting its
args to the new internal format, instead of duplicating code.

Also picks up a lot more error checking, which the legacy modes
should pass after being converted to the new format.

Signed-off-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-22 10:39:09 +02:00
Chuck Ebbert 209f5527b7 drm/crtc: Fix two typos
Fix:

  ioclt -> ioctl in comment
  wrong variable name in debug message

Signed-off-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Frob manually generated patch to make it apply.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-22 10:38:32 +02:00
Masanari Iida 32197aab04 gpu:drm: Fix typo in Documentation/DocBook/drm.xml
This patch fix spelling typos found in drm.xml.
It is because the file is generated from comments in
source codes, I have to fix the typos within source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-21 10:55:33 +02:00
Daniel Vetter 1b11629737 drm: Drop grab fpriv->fbs_lock in drm_fb_release
Paulo Zanoni reported a lockdep splat with a locking inversion between
fpriv->fbs_lock and the modeset locks. This issue was introduced in

commit f2b50c1161
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Sep 12 17:07:32 2014 +0200

    drm: Fixup locking for universal cursor planes

This here is actually one of the rare cases where lockdep hits a false
positive: The deadlock only happens in drm_fb_release, which cleans up
the file private structure when all the references are gone. So the
locking is the very last one and no one else can deadlock. It also
doesn't protect anything at all, since all ioctls are guaranteed to
have returned at this point - otherwise they'd still hold a reference
on the file.

So let's just drop it and replace it with a big comment.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reported-and-Tested-by: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-09-25 17:13:40 +02:00
Daniel Vetter f2b50c1161 drm: Fixup locking for universal cursor planes
Bunch of things amiss:
- Updating crtc->cursor_x/y was done without any locking. Spotted by
  David Herrmann.
- Dereferencing crtc->cursor->fb was using the wrong lock, should take
  the crtc lock.
- Grabbing _all_ modeset locks torpedoes the reason why we added
  fine-grained locks originally: Cursor updates shouldn't stall on
  background stuff like probing outputs.

Best is to just grab the crtc lock around everything and drop all the
other locking. The only issue is that we can't switch planes between
crtcs with that, so make sure that never happens when someone uses
universal plane helpers. This shouldn't be a possible regression ever
since legacy ioctls also only grabbed the crtc lock, so switching
crtcs was never possible for the underlying plane object. And i915
(the only user of universal cursors thus far) has fixed cursor->crtc
links.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-09-24 12:09:23 +02:00
Dave Airlie b2efb3f0a1 Linux 3.17-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUFjfVAAoJEHm+PkMAQRiGANkIAIU3PNrAz9dIItq8a/rEAhnx
 l2shHoOyEmyNR2apholM3BPUNX50cbsc/HGdi7lZKLkA/ifAj6B9nFD2NzVsIChD
 1QWVcvdkKlVuxXCDd26qbijlfmbTOAWrLw9ntvM+J6ZtECM6zCAZF4MAV/FwogPq
 ETGKD76AxJtVIhBMS99troAiC1YxmQ7DKgEr8CraTOR1qwXEonnPCmN/IZA6x2/G
 EXiihOuQB5me1X7k4PI0V8CDscQOn+3B2CQHIrjRB+KiTF+iKIuI8n6ORC6bpFh+
 U8UZP9wLlIG1BrUHG83pIndglIHotqPcjmtfl1WGrRr2hn7abzVSfV+g5Syo3Vg=
 =Ep+s
 -----END PGP SIGNATURE-----

drm: backmerge tag 'v3.17-rc5' into drm-next

This is requested to get the fixes for intel and radeon into the
same tree for future development work.

i915_display.c: fix missing dev_priv conflict.
2014-09-16 11:38:04 +10:00
Dave Airlie 19524f7c59 Merge tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel into drm-next
Here's the updated topic/core-stuff pull request with the two patches
already merged into drm-fixes dropped.

* tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel:
  drm: Drop modeset locking from crtc init function
  drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
  drm/edid: Reduce horizontal timings for pixel replicated modes
  drm: Include task->name and master status in debugfs clients info
  drm/gem: Fix kerneldoc typo
  drm: use c99 initializers in structures
  drm: fix drm_modeset_lock.h kernel-doc notation
2014-09-15 19:55:55 +10:00
Daniel Vetter d0fa1af40e drm: Drop modeset locking from crtc init function
At driver init no one can access modeset objects and we're
single-threaded. So locking is just cargo-culting here. Worse, with
the new ww mutexes and ww mutex slowpath debugging the mutex_lock
might actually fail, and we don't have the full-blown ww recovery
dance.

Which then leads to fireworks when we try to unlock the not-locked
crtc lock.

An audit of all the functions called from here shows that none of them
contain locking checks, so there's also no reason to keep the locking
around just for consistency of caller contexts. Besides that I have
the rule (at least in i915) that such places where we take locks just
to simplify locking checks and not for correctness always require a
comment.

This regression was introduced in

commit 51fd371bba
Author: Rob Clark <robdclark@gmail.com>
Date:   Tue Nov 19 12:10:12 2013 -0500

    drm: convert crtc and connection_mutex to ww_mutex (v5)

v2: Don't drop the lock_init call, spotted by the 0day builder.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=83341
Cc: Rob Clark <robdclark@gmail.com>
Cc: thellstrom@vmware.com
Cc: maarten.lankhorst@canonical.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-09-15 08:56:30 +02:00
Daniel Vetter 67d0ec4e88 drm: Move piles of functions from drmP.h to drm_internal.h
This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.

v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-12 11:16:29 +02:00
Dave Airlie a18b29f0c6 Merge tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2014-08-22:
- basic code for execlist, which is the fancy new cmd submission on gen8. Still
  disabled by default (Ben, Oscar Mateo, Thomas Daniel et al)
- remove the useless usage of console_lock for I915_FBDEV=n (Chris)
- clean up relations between ctx and ppgtt
- clean up ppgtt lifetime handling (Michel Thierry)
- various cursor code improvements from Ville
- execbuffer code cleanups and secure batch fixes (Chris)
- prep work for dev -> dev_priv transition (Chris)
- some of the prep patches for the seqno -> request object transition (Chris)
- various small improvements all over

* tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits)
  drm/i915: fix suspend/resume for GENs w/o runtime PM support
  drm/i915: Update DRIVER_DATE to 20140822
  drm: fix plane rotation when restoring fbdev configuration
  drm/i915/bdw: Disable execlists by default
  drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
  drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
  drm/i915/bdw: Print context state in debugfs
  drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
  drm/i915/bdw: Display execlists info in debugfs
  drm/i915/bdw: Disable semaphores for Execlists
  drm/i915/bdw: Make sure gpu reset still works with Execlists
  drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
  drm/i915: Track cursor changes as frontbuffer tracking flushes
  drm/i915/bdw: Help out the ctx switch interrupt handler
  drm/i915/bdw: Avoid non-lite-restore preemptions
  drm/i915/bdw: Handle context switch events
  drm/i915/bdw: Two-stage execlist submit process
  drm/i915/bdw: Write the tail pointer, LRC style
  drm/i915/bdw: Implement context switching (somewhat)
  drm/i915/bdw: Emission of requests with logical rings
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_drv.c
2014-09-03 08:30:48 +10:00
David Herrmann 00e7208997 drm: fix division-by-zero on dumb_create()
Kinda unexpected, but DIV_ROUND_UP() can overflow if passed an argument
bigger than UINT_MAX - DIVISOR. Fix this by testing for "!cpp" before
using it in the following division.

Note that DIV_ROUND_UP() is defined as:
        #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))

..this will obviously overflow if (n + d - 1) is bigger than UINT_MAX.

Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28 11:38:04 +10:00
Thomas Wood 3a5f87c286 drm: fix plane rotation when restoring fbdev configuration
Make sure plane rotation is reset correctly when restoring the fbdev
configuration by using drm_mode_plane_set_obj_prop which calls the
driver's set_property callback.

The rotation reset feature was introduced in commit 9783de2 (drm:
Resetting rotation property) and the callback issue was originally
addressed in a previous version of the patch, but the fix was not
present in the final version.

v2: Fix documentation warning
    Add some more details to the commit message (Daniel Vetter)

Testcase: igt/kms_rotation_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82236
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-20 17:19:27 +02:00
Daniel Vetter 295ee85316 drm: Docbook fixes
Bunch of small leftovers spotted by looking at the make htmldocs output.

I've left out dp mst, there's too much amiss there.

v2: Also add the missing parameter docbook in the dp mst code - Dave
Airlie correctly pointed out that we don't actually want kerneldoc for
the missing structure members in header files.

Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-14 21:24:17 +02:00
Daniel Vetter 2a0d7cfd94 drm: Add a plane->reset hook
In general having this can't hurt, and the atomic helpers will need
it to be able to reset the state objects properly. The overall idea
is to reset in the order pixels flow, so planes -> crtcs ->
encoders -> connectors.

v2: Squash in fixup from Ville to correctly deference struct drm_plane
instead of drm_crtc when walking the plane list. Fixes an oops in
driver init and resume.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-11 14:24:44 +02:00
Daniel Vetter 3d30a59bfc drm: Move ->old_fb from crtc to plane
Atomic implemenations for legacy ioctls must be able to drop locks.
Which doesn't cause havoc since we only do that while constructing
the new state, so no driver or hardware state change has happened.

The only troubling bit is the fb refcounting the core does - if
someone else has snuck in then it might potentially unref an
outdated framebuffer. To fix that move the old_fb temporary storage
into struct drm_plane for all ioctls, so that the atomic helpers can
update it.

v2: Fix up the error case handling as suggested by Matt Roper and just
grab locks uncoditionally - there's no point in optimizing the locking
for when userspace gets it wrong.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-08 17:46:52 +02:00
Daniel Vetter d059f652e7 drm: Handle legacy per-crtc locking with full acquire ctx
So drivers using the atomic interfaces expect that they can acquire
additional locks internal to the driver as-needed. Examples would be
locks to protect shared state like shared display PLLs.

Unfortunately the legacy ioctls assume that all locking is fully done
by the drm core. Now for those paths which grab all locks we already
have to keep around an acquire context in dev->mode_config. Helper
functions that implement legacy interfaces in terms of atomic support
can therefore grab this acquire contexts and reuse it.

The only interfaces left are the cursor and pageflip ioctls. So add
functions to grab the crtc lock these need using an acquire context
and preserve it for atomic drivers to reuse.

v2:
- Fixup comments&kerneldoc.
- Drop the WARNING from modeset_lock_all_crtcs since that can be used
  in legacy paths with crtc locking.

v3: Fix a type on the kerneldoc Dave spotted.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-08 17:46:45 +02:00
Daniel Vetter a6a8bb848d drm: Move modeset_lock_all helpers to drm_modeset_lock.[hc]
Somehow we've forgotten about this little bit of OCD.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-08 17:46:40 +02:00
Daniel Vetter 10f637bf29 drm: Add drm_plane/connector_index
In the atomic state we'll have an array of states for crtcs, planes
and connectors and need to be able to at them by their index. We
already have a drm_crtc_index function so add the missing ones for
planes and connectors.

If it later on turns out that the list walking is too expensive we can
add the index to the relevant modeset objects.

Rob Clark doesn't like the loops too much, but we can always add an
obj->idx parameter later on. And for now reiterating is actually safer
since nowadays we have hotpluggable connectors (thanks to DP MST).

v2: Fix embarrassing copypasta fail in kerneldoc and header
declarations, spotted by Matt Roper.

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-08 17:46:03 +02:00
Dave Airlie 7963e9db1b Revert "drm: drop redundant drm_file->is_master"
This reverts commit 48ba813701.

Thanks to Chris:
"drm_file->is_master is not synomous with having drm_file->master ==
drm_file->minor->master. This is because drm_file->master is the same
for all drm_files of the same generation and so when there is a master,
every drm_file believes itself to be the master. Confusion ensues and
things go pear shaped when one file is closed and there is no master
anymore."

Conflicts:
	drivers/gpu/drm/drm_drv.c
	drivers/gpu/drm/drm_stub.c
2014-08-08 07:30:53 +10:00
Chris Wilson eaf99c749d drm: Perform cmdline mode parsing during connector initialisation
i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.

We also then expose the cmdline user mode in the connector mode lists.

v2: Rebase after connector->name upheaval.

v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.

v4: Fix checkpatch.

v5: Select FB_CMDLINE to adapt to the changed fbdev patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 14:50:12 +02:00
Daniel Vetter 83f45fc360 drm: Don't grab an fb reference for the idr
The current refcounting scheme is that the fb lookup idr also holds a
reference. This works out nicely bacause thus far we've always
explicitly cleaned up idr entries for framebuffers:
- Userspace fbs get removed in the rmfb ioctl or when the drm file
  gets closed.
- Kernel fbs (for fbdev emulation) get cleaned up by the driver code
  at module unload time.

But now i915 also reconstructs the bios fbs for a smooth transition.
And that fb is purely transitional and should get removed immmediately
once all crtcs stop using it. Of course if the i915 fbdev code decides
to reuse it as the main fbdev fb then it shouldn't be cleaned up, but
in that case the fbdev code will grab it's own reference.

The problem is now that we also want to register that takeover fb in
the idr, so that userspace can do a smooth transition (animated maybe
even!) itself. But currently we have no one who will clean up the idr
reference once that fb isn't useful any more, and so essentially leak
it.

Fix this by no longer holding a full fb reference for the idr, but
instead just have a weak reference using kref_get_unless_zero. But
that requires us to synchronize and clean up with the idr and fb_lock
in drm_framebuffer_free, so add that. It's a bit ugly that we have to
unconditionally grab the fb_lock, but without that someone might creep
through a race.

This leak was caught by the fb leak check in drm_mode_config_cleanup.
Originally the leak was introduced in

commit 46f297fb83
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Mar 7 08:57:48 2014 -0800

    drm/i915: add plane_config fetching infrastructure v2

Cc:  Jesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77511
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 10:41:13 +02:00
Dave Airlie acf8294fec Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into drm-next
bunch of cleanups
* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: mark drm_context support as legacy
  drm: make sysfs device always available for minors
  drm: make minor->index available early
  drm: merge drm_drv.c into drm_ioctl.c
  drm: move module initialization to drm_stub.c
  drm: don't de-authenticate clients on master-close
  drm: drop redundant drm_file->is_master
  drm: extract legacy ctxbitmap flushing
2014-08-06 17:21:13 +10:00
David Herrmann 48ba813701 drm: drop redundant drm_file->is_master
The drm_file->is_master field is redundant as it's equivalent to:
    drm_file->master && drm_file->master == drm_file->minor->master

1) "=>"
  Whenever we set drm_file->is_master, we also set:
      drm_file->minor->master = drm_file->master;

  Whenever we clear drm_file->is_master, we also call:
      drm_master_put(&drm_file->minor->master);
  which implicitly clears it to NULL.

2) "<="
  minor->master cannot be set if it is non-NULL. Therefore, it stays as
  is unless a file drops it.

  If minor->master is NULL, it is only set by places that also adjust
  drm_file->is_master.

Therefore, we can safely drop is_master and replace it by an inline helper
that matches:
    drm_file->master && drm_file->master == drm_file->minor->master

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-08-05 16:07:50 +02:00
Daniel Vetter 168c02ec06 drm: Fix race when checking for fb in the generic kms obj lookup
In my review of

commit 98f75de40e
Author: Rob Clark <robdclark@gmail.com>
Date:   Fri May 30 11:37:03 2014 -0400

    drm: add object property typ

I asked for a check to make sure that we never leak an fb from the
generic mode object lookup since those have completely different
lifetime rules. Rob added it, but outside of the idr mutex, which
means that our dereference of obj->type can already chase free'd
memory.

Somehow I didn't spot this, so fix this asap.

v2: Simplify the conditionals as suggested by Chris.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-05 11:06:52 +10:00
Dave Airlie c759606c96 Merge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel into drm-next
Final feature pull for 3.17.

drm-intel-next-2014-07-25:
- Ditch UMS support (well just the config option for now)
- Prep work for future platforms (Sonika Jindal, Damien)
- runtime pm/soix fixes (Paulo, Jesse)
- psr tracking improvements, locking fixes, now enabled by default!
- rps fixes for chv (Deepak, Ville)
- drm core patches for rotation support (Ville, Sagar Kamble) - the i915 parts
  unfortunately didn't make it yet
- userptr fixes (Chris)
- minimum backlight brightness (Jani), acked long ago by Matthew Garret on irc -
  I've forgotten about this patch :(

QA is a bit unhappy about the DP MST stuff since it broke hpd testing a
bit, but otherwise looks sane. I've backmerged drm-next to resolve
conflicts with the mst stuff, which means the new tag itself doesn't
contain the overview as usual.

* tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel: (75 commits)
  drm/i915/userptr: Keep spin_lock/unlock in the same block
  drm/i915: Allow overlapping userptr objects
  drm/i915: Ditch UMS config option
  drm/i915: respect the VBT minimum backlight brightness
  drm/i915: extract backlight minimum brightness from VBT
  drm/i915: Replace HAS_PCH_SPLIT which incorrectly lets some platforms in
  drm/i915: Returning from increase/decrease of pllclock when invalid
  drm/i915: Setting legacy palette correctly for different platforms
  drm/i915: Avoid incorrect returning for some platforms
  drm/i915: Writing proper check for reading of pipe status reg
  drm/i915: Returning the right VGA control reg for platforms
  drm/i915: Allowing changing of wm latencies for valid platforms
  drm/i915: Adding HAS_GMCH_DISPLAY macro
  drm/i915: Fix possible overflow when recording semaphore states.
  drm/i915: Do not unmap object unless no other VMAs reference it
  drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable
  drm/i915: Reorder ctx unref on ppgtt cleanup
  drm/i915/error: Check the potential ctx obj's vm
  drm/i915: Fix printing proper min/min/rpe values in debugfs
  drm/i915: BDW can also detect unclaimed registers
  ...
2014-08-04 17:57:34 +10:00
Dave Airlie 2ee39452fa drm: close race in connector registration (v2)
Daniel pointed out with hotplug that userspace could be trying to oops us
as root for lols, and that to be correct we shouldn't register the object
with the idr before we have fully set the connector object up.

His proposed solution was a lot more life changing, this seemed like a simpler
proposition to me, get the connector object id from the idr, but don't
register the object until the drm_connector_register callback.

The open question is whether the drm_mode_object_register needs a bigger lock
than just the idr one, but I can't see why it would, but I can be locking
challenged.

v2: fix bool noreg into sane - add comment.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-04 16:54:02 +10:00
Daniel Vetter 4dac3edfe6 Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next
Pull in drm-next with Dave's DP MST support so that I can merge some
conflicting patches which also touch the driver load sequencing around
interrupt handling.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_dp.c

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-29 20:49:36 +02:00
Vandana Kannan ff587e45a1 drm/crtc: Add property for aspect ratio
Added a property to enable user space to set aspect ratio.
This patch contains declaration of the property and code to create the
property.

v2: Thierry's review comments.
	- Made aspect ratio enum generic instead of HDMI/CEA specfic
	- Removed usage of temporary aspect_ratio variable

v3: Thierry's review comments.
	- Fixed indentation

v4: Thierry's review comments.
	- Return ENOMEM when property creation fails

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-23 07:05:24 +02:00
Thierry Reding 2aa9d2bc8c drm: Fix function names in kerneldoc
The drm_property_create_enum(), drm_property_create_bitmask() and
drm_property_create_range() contain the wrong name in the kerneldoc
comment. This is probably simply a copy/paste mistake.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-18 15:39:27 +02:00
Ville Syrjälä 3c9855f6dc drm: Add drm_rotation_simplify()
drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-11 23:44:20 +02:00
Ville Syrjälä c1df5f3c2d drm: Add drm_mode_create_rotation_property()
Add a function to create a standards compliant rotation property.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-11 23:43:52 +02:00
Ville Syrjälä 7689ffb32f drm: Add support_bits parameter to drm_property_create_bitmask()
Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.

v2: Populate values[] array as non-sparse
    Make supported_bits 64bit
    Fix up omapdrm call site (Rob)

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-11 23:43:23 +02:00
Dave Airlie ca5a1b9ba0 Merge tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel into drm-next
- Accurate frontbuffer tracking and frontbuffer rendering invalidate, flush and
  flip events. This is prep work for proper PSR support and should also be
  useful for DRRS&fbc.
- Runtime suspend hardware on system suspend to support the new SOix sleep
  states, from Jesse.
- PSR updates for broadwell (Rodrigo)
- Universal plane support for cursors (Matt Roper), including core drm patches.
- Prefault gtt mappings (Chris)
- baytrail write-enable pte bit support (Akash Goel)
- mmio based flips (Sourab Gupta) instead of blitter ring flips
- interrupt handling race fixes (Oscar Mateo)

And old, not yet merged features from the previous round:
- rps/turbo support for chv (Deepak)
- some other straggling chv patches (Ville)
- proper universal plane conversion for the primary plane (Matt Roper)
- ppgtt on vlv from Jesse
- pile of cleanups, little fixes for insane corner cases and improved debug
  support all over

* tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel: (99 commits)
  drm/i915: Update DRIVER_DATE to 20140620
  drivers/i915: Fix unnoticed failure of init_ring_common()
  drm/i915: Track frontbuffer invalidation/flushing
  drm/i915: Use new frontbuffer bits to increase pll clock
  drm/i915: don't take runtime PM reference around freeze/thaw
  drm/i915: use runtime irq suspend/resume in freeze/thaw
  drm/i915: Properly track domain of the fbcon fb
  drm/i915: Print obj->frontbuffer_bits in debugfs output
  drm/i915: Introduce accurate frontbuffer tracking
  drm/i915: Drop schedule_back from psr_exit
  drm/i915: Ditch intel_edp_psr_update
  drm/i915: Drop unecessary complexity from psr_inactivate
  drm/i915: Remove ctx->last_ring
  drm/i915/chv: Ack interrupts before handling them (CHV)
  drm/i915/bdw: Ack interrupts before handling them (GEN8)
  drm/i915/vlv: Ack interrupts before handling them (VLV)
  drm/i915: Ack interrupts before handling them (GEN5 - GEN7)
  drm/i915: Don't BUG_ON in i915_gem_obj_offset
  drm/i915: Grab dev->struct_mutex in i915_gem_pageflip_info
  drm/i915: Add some L3 registers to the parser whitelist
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_drv.c
2014-07-09 10:38:42 +10:00
Dave Airlie 43aba7eb0d drm: add a path blob property
This property will be used by the MST code to provide userspace
with a path to parse so it can recognise connectors around hotplugs.

Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08 11:40:23 +10:00
Dave Airlie 2390cd11bf drm/crtc: add interface to reinitialise the legacy mode group
This can be called to update things after dynamic connectors/encoders
are created/deleted.

Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08 11:39:04 +10:00
Thomas Wood 4cf2b28146 drm/debugfs: add an "edid_override" file per connector
Add a file to debugfs for each connector to allow the EDID to be
overridden.

v2: Copy ubuf before accessing it and reject invalid length data. (David
    Herrmann)
    Ensure override_edid is reset when a new EDID value is written.
    (David Herrmann)
    Fix the debugfs file permissions. (David Herrmann)

Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 08:56:28 +02:00
Thomas Wood 30f6570798 drm/debugfs: add a "force" file per connector
Add a file to debugfs for each connector to enable modification of the
"force" connector attribute. This allows connectors to be enabled or
disabled for testing and debugging purposes.

v2: Add stricter value checking and clean up debugfs_entry if file
    creation fails in drm_debugfs_connector_add. (David Herrmann)

Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 08:56:01 +02:00
Thomas Wood 34ea3d3863 drm: add register and unregister functions for connectors
Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.

Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 08:55:28 +02:00
Matt Roper fc1d3e44ef drm: Allow drivers to register cursor planes with crtc
Universal plane support had placeholders for cursor planes, but didn't
actually do anything with them.  Save the cursor plane reference inside
the crtc and update the cursor plane parameter from void* to drm_plane.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-13 17:45:22 +02:00
Chris Wilson 17cfd91f39 drm: Avoid NULL deference when disabling a plane from userspace
To disable a plane, userspace passes in an framebuffer id of 0. This
causes us to pass CRTC == NULL to setplane_internal, who promptly
deferences it to grab the struct drm_device. Oops.

[ 1296.467327] BUG: unable to handle kernel NULL pointer dereference at   (null)
[ 1296.467332] IP: [<c134dc51>] setplane_internal+0x11/0x280
[ 1296.467338] *pde = 00000000
[ 1296.467341] Oops: 0000 [#1] SMP
[ 1296.467344] Modules linked in: ccm bnep bluetooth snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel arc4 iwldvm snd_hda_controller snd_hda_codec mac80211 snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer iwlwifi sdhci_pci snd cfg80211 x86_pkg_temp_thermal hp_wmi sdhci sparse_keymap mmc_core crc32c_intel rfkill microcode hp_accel lpc_ich lis3lv02d wmi mfd_core serio_raw input_polldev soundcore e1000e ptp pps_core
[ 1296.467367] CPU: 1 PID: 672 Comm: Xorg Tainted: G        W     3.15.0-rc8+ #351
[ 1296.467369] Hardware name: Hewlett-Packard HP ProBook 6360b/1620, BIOS 68SCF Ver. B.42 12/29/2010
[ 1296.467371] task: f423b5c0 ti: c2332000 task.ti: c2332000
[ 1296.467374] EIP: 0060:[<c134dc51>] EFLAGS: 00013286 CPU: 1
[ 1296.467376] EIP is at setplane_internal+0x11/0x280
[ 1296.467378] EAX: 00000000 EBX: c2333e90 ECX: 00000000 EDX: f3165600
[ 1296.467380] ESI: f430f400 EDI: 00000000 EBP: c2333e14 ESP: c2333dd4
[ 1296.467382]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1296.467384] CR0: 80050033 CR2: 00000000 CR3: 00159000 CR4: 000407d0
[ 1296.467385] Stack:
[ 1296.467387]  000200da 00000002 c2333de8 c15dc4a0 f430f400 c2333e00 c134c54f eeeeeeee
[ 1296.467391]  f430f400 00000007 f416b480 c2333e14 00000000 c2333e90 f430f400 00000000
[ 1296.467396]  c2333e4c c1350aed 00000000 00000000 00000000 00000000 00000000 00000000
[ 1296.467400] Call Trace:
[ 1296.467406]  [<c15dc4a0>] ? mutex_lock+0x10/0x28
[ 1296.467408]  [<c134c54f>] ? _object_find+0x5f/0x90
[ 1296.467413]  [<c1350aed>] drm_mode_setplane+0x10d/0x1f0
[ 1296.467416]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467420]  [<c1342e4d>] drm_ioctl+0x1bd/0x4f0
[ 1296.467423]  [<c13509e0>] ? drm_mode_getplane+0x100/0x100
[ 1296.467427]  [<c111c023>] ? handle_mm_fault+0x5d3/0xb30
[ 1296.467431]  [<c1118f31>] ? tlb_finish_mmu+0x11/0x40
[ 1296.467435]  [<c1342c90>] ? drm_ioctl_flags+0x40/0x40
[ 1296.467438]  [<c11593d2>] do_vfs_ioctl+0x2f2/0x4d0
[ 1296.467443]  [<c1226512>] ? inode_has_perm.isra.32+0x32/0x40
[ 1296.467446]  [<c122662f>] ? file_has_perm+0x7f/0x90
[ 1296.467449]  [<c1226fec>] ? selinux_file_ioctl+0x4c/0xf0
[ 1296.467452]  [<c1159610>] SyS_ioctl+0x60/0x90
[ 1296.467456]  [<c15e578c>] sysenter_do_call+0x12/0x22
[ 1296.467457] Code: 3f cf ff eb dd ba 3f 00 00 00 b8 d9 c9 7f c1 e8 e6 3f cf ff eb d9 8d 74 26 00 55 89 e5 57 56 53 83 ec 34 66 66 66 66 90 89 45 f0 <8b> 00 85 c9 89 d6 89 cb 89 45 ec 0f 84 16 01 00 00 8b 45 f0 e8
[ 1296.467485] EIP: [<c134dc51>] setplane_internal+0x11/0x280 SS:ESP 0068:c2

Fixes regression from
commit b02fd7fd8a541c3d590bfdda23365a927b507ceb
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Jun 10 08:28:10 2014 -0700

    drm: Support legacy cursor ioctls via universal planes when possible (v4)

While at it move the plane parameter to the first position in
setplane_internal since that's the main object we're manipulating.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pallavi G<pallavi.g@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Add note about parameter reordering.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-13 17:45:21 +02:00
Matt Roper 161d0dc1dc drm: Support legacy cursor ioctls via universal planes when possible (v4)
If drivers support universal planes and have registered a cursor plane
with the DRM core, we should use that universal plane support when
handling legacy cursor ioctls.  Drivers that transition to universal
planes won't have to maintain separate legacy ioctl handling; drivers
that don't transition to universal planes will continue to operate
without any change to behavior.

Note that there's a bit of a mismatch between the legacy cursor ioctls
and the universal plane API's --- legacy ioctl's use driver buffer
handles directly whereas the universal plane API takes drm_framebuffers.
Since there's no way to recover the driver handle from a
drm_framebuffer, we can implement legacy ioctl's in terms of universal
plane interfaces, but cannot implement universal plane interfaces in
terms of legacy ioctls.  Specifically, there's no way to create a
general cursor helper in the way we previously created a primary plane
helper.

It's important to land this patch before any patches that add universal
cursor support to individual drivers so that drivers don't have to worry
about juggling two different styles of reference counting for cursor
buffers when userspace mixes and matches legacy and universal cursor
calls.  With this patch, a driver that switches to universal cursor
support may assume that all cursor buffers are wrapped in a
drm_framebuffer and can rely on framebuffer reference counting for all
cursor operations.

v4:
 - Add comments pointing out setplane_internal's reference-eating
   semantics.
v3:
 - Drop drm_mode_rmfb() call that is no longer needed now that we're
   using setplane_internal(), which takes care of deref'ing the
   appropriate framebuffer.
v2:
 - Use new add_framebuffer_internal() function to create framebuffer
   rather than trying to call directly into the ioctl interface and
   look up the handle returned.
 - Use new setplane_internal() function to update the cursor plane
   rather than calling through the ioctl interface.  Note that since
   we're no longer looking up an fb_id, no extra reference will be
   taken here.
 - Grab extra reference to fb under lock in !BO case to avoid issues
   where racing userspace could cause the fb to be destroyed out from
   under us after we grab the fb pointer.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-13 17:45:21 +02:00
Matt Roper b36552b32a drm: Refactor setplane to allow internal use (v3)
Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID.  We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.

v3:
 - Move integer overflow checking from setplane_internal to setplane
   ioctl.  The upcoming legacy cursor support via universal planes needs
   to maintain current cursor ioctl semantics and not return error for
   these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
 - Allow planes to be disabled without a valid crtc again (and add
   mention of this to setplane's kerneldoc, since it doesn't seem to be
   mentioned anywhere else).
 - Reformat some parameter line wrap

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-13 17:45:20 +02:00
Matt Roper c394c2b08e drm: Refactor framebuffer creation to allow internal use (v2)
Refactor DRM framebuffer creation into a new function that returns a
struct drm_framebuffer directly.  The upcoming universal cursor support
will want to create framebuffers internally to wrap cursor buffers, so
we want to be able to share that framebuffer creation with the
drm_mode_addfb2 ioctl handler.

v2: Take struct drm_mode_fb_cmd2 parameter directly rather than void*

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Pallavi G<pallavi.g@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-13 17:45:20 +02:00
Daniel Vetter 832fd395ce drm: Fix getconnector connection_mutex locking
I've fumbled my own idea and enthusiastically wrapped all the
getconnector code with the connection_mutex. But we only need it to
chase the connector->encoder link. Even there it's not really needed
since races with userspace won't matter, but better paranoid and
consistent about this stuff.

If we grap it everywhere connector probe callbacks can't grab it
themselves, which means they'll deadlock. i915 does that for the load
detect pipe. Furthermore i915 needs to do a ww dance since we also
need to grab the mutex of the load detect crtc.

This is a regression from

commit 6e9f798d91
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu May 29 23:54:47 2014 +0200

    drm: Split connection_mutex out of mode_config.mutex (v3)

Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-05 16:10:20 +02:00
Matt Roper 7f994f3fc4 drm: Check CRTC compatibility in setplane
The DRM core setplane code should check that the plane is usable on the
specified CRTC before calling into the driver.

Prior to this patch, a plane's possible_crtcs field was purely
informational for userspace and was never actually verified at the
kernel level (aside from the primary plane helper).

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-05 08:52:43 +02:00
Rob Clark 51fd371bba drm: convert crtc and connection_mutex to ww_mutex (v5)
For atomic, it will be quite necessary to not need to care so much
about locking order.  And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.

Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.

Atomic will use this to keep track of which locks have been acquired
in a transaction.

v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 09:54:33 +10:00
Daniel Vetter 6e9f798d91 drm: Split connection_mutex out of mode_config.mutex (v3)
After the split-out of crtc locks from the big mode_config.mutex
there's still two major areas it protects:
- Various connector probe states, like connector->status, EDID
  properties, probed mode lists and similar information.
- The links from connector->encoder and encoder->crtc and other
  modeset-relevant connector state (e.g. properties which control the
  panel fitter).

The later is used by modeset operations. But they don't really care
about the former since it's allowed to e.g. enable a disconnected VGA
output or with a mode not in the probed list.

Thus far this hasn't been a problem, but for the atomic modeset
conversion Rob Clark needs to convert all modeset relevant locks into
w/w locks. This is required because the order of acquisition is
determined by how userspace supplies the atomic modeset data. This has
run into troubles in the detect path since the i915 load detect code
needs _both_ protections offered by the mode_config.mutex: It updates
probe state and it needs to change the modeset configuration to enable
the temporary load detect pipe.

The big deal here is that for the probe/detect users of this lock a
plain mutex fits best, but for atomic modesets we really want a w/w
mutex. To fix this lets split out a new connection_mutex lock for the
modeset relevant parts.

For simplicity I've decided to only add one additional lock for all
connector/encoder links and modeset configuration states. We have
piles of different modeset objects in addition to those (like bridges
or panels), so adding per-object locks would be much more effort.

Also, we're guaranteed (at least for now) to do a full modeset if we
need to acquire this lock. Which means that fine-grained locking is
fairly irrelevant compared to the amount of time the full modeset will
take.

I've done a full audit, and there's just a few things that justify
special focus:
- Locking in drm_sysfs.c is almost completely absent. We should
  sprinkle mode_config.connection_mutex over this file a bit, but
  since it already lacks mode_config.mutex this patch wont make the
  situation any worse. This is material for a follow-up patch.

- omap has a omap_framebuffer_flush function which walks the
  connector->encoder->crtc links and is called from many contexts.
  Some look like they don't acquire mode_config.mutex, so this is
  already racy. Again fixing this is material for a separate patch.

- The radeon hot_plug function to retrain DP links looks at
  connector->dpms. Currently this happens without any locking, so is
  already racy. I think radeon_hotplug_work_func should gain
  mutex_lock/unlock calls for the mode_config.connection_mutex.

- Same applies to i915's intel_dp_hot_plug. But again, this is already
  racy.

- i915 load_detect code needs to acquire this lock. Which means the
  w/w dance due to Rob's work will be nicely contained to _just_ this
  function.

I've added fixme comments everywhere where it looks suspicious but in
the sysfs code. After a quick irc discussion with Dave Airlie it
sounds like the lack of locking in there is due to sysfs cleanup fun
at module unload.

v1: original (only compile tested)

v2: missing mutex_init(), etc (from Rob Clark)

v3: i915 needs more care in the conversion:
- Protect the edp pp logic with the connection_mutex.
- Use connection_mutex in the backlight code due to
  get_pipe_from_connector.
- Use drm_modeset_lock_all in suspend/resume paths.
- Update lock checks in the overlay code.

Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-06-04 13:25:21 +10:00
Rob Clark 8291272ad2 drm: spiff out FB refcnting traces
I find myself making this change locally whenever debugging FB reference
counting.  Which seems a bit silly.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-06-04 13:23:20 +10:00
Rob Clark ebc44cf386 drm: add signed-range property type
Like range, but values are signed.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-06-04 13:23:11 +10:00
Rob Clark 98f75de40e drm: add object property type
An object property is an id (idr) for a drm mode object.  This
will allow a property to be used set/get a framebuffer, CRTC, etc.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-04 13:23:03 +10:00
Rob Clark 5ea22f24d7 drm: add extended property types
If we continue to use bitmask for type, we will quickly run out of room
to add new types.  Split this up so existing part of bitmask range
continues to function as before, but reserve a chunk of the remaining
space for an integer type-id.  Wrap this all up in some type-check
helpers to keep the backwards-compat uglyness contained.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-04 13:22:53 +10:00
Rob Clark a2b34e226a drm: helpers to find mode objects
Add a few more useful helpers to find mode objects.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-04 13:22:44 +10:00
Jani Nikula d5ab2b430b drm: drop drm_get_connector_name() and drm_get_encoder_name()
No longer used or needed as the structs have a name field.

Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 13:18:44 +10:00
Jani Nikula 83a8cfd3d7 drm: replace drm_get_encoder_name() with direct name field use
Generated using semantic patch:

@@
expression E;
@@

- drm_get_encoder_name(E)
+ E->name

Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 13:18:42 +10:00
Jani Nikula 259338205c drm: replace drm_get_connector_name() with direct name field use
Generated using semantic patch:

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

[airlied: regenerated]

Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 13:17:41 +10:00
Dave Airlie 182407a6ed drm: add DP MST encoder type
This adds an encoder type for DP MST encoders.

Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30 11:59:51 +10:00
Jani Nikula e5748946e9 drm: store encoder name in encoder struct
This makes drm_get_encoder_name() thread safe.

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\
.ptsecurity.ru
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30 11:58:45 +10:00
Jani Nikula 2abdd3137e drm: store connector name in connector struct (v2)
This makes drm_get_connector_name() thread safe.

[airlied: fix to build.]

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01.ptsecurity.ru
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-30 11:58:41 +10:00
Dave Airlie 425a9a3ad1 Merge tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel into drm-next
Update pull request with drm core patches. Mostly some polish for the
primary plane stuff and a pile of patches all over from Thierry. Has
survived a few days in drm-intel-nightly without causing ill.

I've frobbed my scripts a bit to also tag my topic branches so that you
have something stable to pull - I've accidentally pushed a bunch more
patches onto this branch before you've taken the old pull request.

* tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
  drm: Make drm_crtc_helper_disable() return void
  drm: Fix indentation of closing brace
  drm/dp: Fix typo in comment
  drm: Fixup flip-work kerneldoc
  drm/fb: Fix typos
  drm/edid: Cleanup kerneldoc
  drm/edid: Drop revision argument for drm_mode_std()
  drm: Try to acquire modeset lock on panic or sysrq
  drm: remove unused argument from drm_open_helper
  drm: Handle ->disable_plane failures correctly
  drm: Simplify fb refcounting rules around ->update_plane
  drm/crtc-helper: gc usless connector loop in disable_unused_functions
  drm/plane_helper: don't disable plane in destroy function
  drm/plane-helper: Fix primary plane scaling check
  drm: make mode_valid callback optional
  drm/edid: Fill PAR in AVI infoframe based on CEA mode list
2014-05-16 11:47:13 +10:00
Dave Airlie ad222799be drm: fix memory leak around mode_group (v2)
This mode group id_list was never being freed.

v2: take David's suggestion to free in minor_free.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-16 11:46:06 +10:00
Daniel Vetter 731cce487a drm: Handle ->disable_plane failures correctly
The ->disable_plane hook always had a return value, but only since the
introduction of primary planes was there any implementation that
actually failed.

So handle such failures correctly.

Note that drm_plane_force_disable is special: In the modeset cleanup
case we first disable all crtc, so primary planes should all be freed
already. And in the fb helper we only reset non-primary planes. Still
better be paranoid and add an early return.

I don't see how this could happen, but it might fix the fb refcount
underrun Thierry is seeing. Matt Roper spotted this issue.

Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-23 20:07:00 +02:00
Daniel Vetter 0fe27f063f drm: Simplify fb refcounting rules around ->update_plane
The introduction of primary planes has apparently caused a bit of fb
refcounting fun for people. That makes it a good time to clean up the
arcane rules and slight differences between ->update_plane and
->set_config. The new rules are:

- The core holds a reference for both the new and the old fb (if
  they're non-NULL of course) while calling into the driver through
  either ->update_plane or ->set_config.

- Drivers may not clobber plane->fb if their callback fails. If they
  do that, they need to store a pointer to the old fb in it again.
  When calling into the driver plane->fb still points at the current
  (old) framebuffer.

- The core will update the plane->fb pointer on success. Drivers can
  do that themselves too, but aren't required to any more for the
  primary plane.

- The core will update fb refcounts for the plane->fb pointer,
  presuming the drivers hold up their end of the bargain.

v2: Remove now unused tmpfb (Thierry)

v3: Drop broken changes from drm_mode_setplane (Ville). Also polish
the commit message a bit.

v4: Also fix up the handling of ->disable_plane in
drm_plane_force_disable. The issue was that we didn't save plane->fb
over the ->disable_plane call. Just paranoia, nothing relies on this.

v5: Keep still useful comments about directly calling ->set_config,
which I should have done for v4 already. Requested by Matt.

Cc: Thierry Reding <treding@nvidia.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-23 20:06:47 +02:00
Matt Roper 681e7ec730 drm: Allow userspace to ask for universal plane list (v2)
Userspace clients which wish to receive all DRM planes (primary and
cursor planes in addition to the traditional overlay planes) may set the
DRM_CLIENT_CAP_UNIVERSAL_PLANES capability.

v2: Hide behind drm.universal_planes module option [suggested by
    Daniel Vetter]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:29 -04:00
Matt Roper f4510a2752 drm: Replace crtc fb with primary plane fb (v3)
Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:28 -04:00
Matt Roper e13161af80 drm: Add drm_crtc_init_with_planes() (v2)
Add a new drm_crtc_init_with_planes() to allow drivers to provide
specific primary and cursor planes at CRTC initialization.  The existing
drm_crtc_init() interface remains to avoid driver churn in existing
drivers; it will initialize the CRTC with a plane helper-created primary
plane and no cursor plane.

v2:
  - Move drm_crtc_init() to plane helper file so that nothing in the DRM
    core depends on helpers.  [suggested by Daniel Vetter]
  - Keep cursor parameter to drm_crtc_init_with_planes() a void* until
    we actually add cursor support.  [suggested by Daniel Vetter]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:27 -04:00
Rob Clark 9922ab5a7e drm: Add plane type property (v2)
Add a plane type property to allow userspace to distinguish plane types.

v2: Driver-specific churn eliminated now that drm_plane_init() and
    drm_universal_plane_init() were separated out in a previous patch.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:16 -04:00
Matt Roper dc415ff97d drm: Add drm_universal_plane_init()
Add a new plane initialization interface for universal plane support
that allows a specific plane type (primary, cursor, or overlay) to
be specified.

drm_plane_init() remains as a compatibility API to reduce churn in
existing drivers.  The 'bool priv' parameter has been changed to
'bool is_primary' under the assumption that all existing uses of
private planes were representing primary planes.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:08 -04:00
Matt Roper af93629d15 drm: Make drm_crtc_check_viewport non-static
This function will be used by the universal plane helpers and may also
be useful for individual drivers.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:11:28 -04:00
Matt Roper e27dde3e1c drm: Add support for multiple plane types (v2)
The DRM core currently only tracks "overlay"-style planes.  Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.

v2: Add drm_for_each_legacy_plane() iterator to smooth transition
    of drivers with plane loops.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 19:13:07 -04:00
Thomas Hellstrom 436830571e drm: Improve on minor type helpers v3
Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.

v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-28 14:19:01 +01:00
Thomas Hellstrom 09f308f7b6 drm: Have the crtc code only reference master from legacy nodes v2
control- and render nodes are intended to be master-less.

v2: Replace tests for !legacy with tests for !mode_group for readability.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:01 +01:00
Dave Airlie 978c605016 Merge branch 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm into drm-next
Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)

Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.

* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
  drm/imx: remove drm_mode_connector_detach_encoder harder
  drm: kerneldoc polish for drm_crtc.c
  drm: kerneldoc polish for drm_crtc_helper.c
  drm: drop error code for drm_helper_resume_force_mode
  drm/crtc-helper: remove LOCKING from kerneldoc
  drm: remove return value from drm_helper_mode_fill_fb_struct
  drm/doc: Fix misplaced </para>
  drm: remove drm_display_mode->private_size
  drm: polish function kerneldoc for drm_modes.[hc]
  drm/modes: drop maxPitch from drm_mode_validate_size
  drm/modes: drop return value from drm_display_mode_from_videomode
  drm/modes: remove drm_mode_height/width
  drm: extract drm_modes.h for drm_crtc.h functions
  drm: move drm_mode related functions into drm_modes.c
  drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
  drm/doc: Integrate drm_modes.c kerneldoc
  drm/kms: rip out drm_mode_connector_detach_encoder
  drm/doc: Add function reference documentation for drm_mm.c
  drm/doc: Overview documentation for drm_mm.c
  drm/mm: Remove MM_UNUSED_TARGET
  ...
2014-03-18 19:09:10 +10:00
David Herrmann b28cd41f9e drm/crtc: add sanity checks to create_dumb()
Lets make sure some basic expressions are always true:
  bpp != NULL
  width != NULL
  height != NULL
  stride = bpp * width < 2^32
  size = stride * height < 2^32
  PAGE_ALIGN(size) < 2^32

At least the udl driver doesn't check for multiplication-overflows, so
lets just make sure it will never happen. These checks allow drivers to do
any 32bit math without having to test for mult-overflows themselves.

The two divisions might hurt performance a bit, but dumb_create() is only
used for scanout-buffers, so that should be fine. We could use 64bit math
to avoid the divisions, but that may be slow on 32bit machines.. Or maybe
there should just be a "safe_mult32()" helper, which currently doesn't
exist (I think?).

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:11:01 +01:00
Daniel Vetter c8e32cc121 drm: kerneldoc polish for drm_crtc.c
- Standardized on "Returns:" Block.
- Sprinkle missing kerneldoc over all exported functions and all
  ioctls.
- Add a stern warning that driver's really shouldn't use
  drm_mode_group_init_legacy_group.
- Usual attempt at more consistency.
- Add warnings that drm_mode_object_get/put don't do refcounting,
  despite what the names might lead to believe.
- Try to clarify the framebuffer setup/cleanup functions wrt driver
  private framebuffers - I've fallen recently over this when reviewing
  i915 fbdev patches.
- Align function parameters where the kerneldoc has been updated.
- Most of the drm_get_*_name functions aren't thread safe. Add stern
  warnings where this is the case.

Since a lot of the functions in drm_crtc.c are boilerplate to handle
properties and create default sets of them it might be useful to
extract all that code into a new file drm_property.c. Especially since
properties will be used a lot more in the future.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:49 +01:00
Daniel Vetter 8bd441b27e drm: move drm_mode related functions into drm_modes.c
Makes more sense and gives better grouping in the DocBook function
reference sections. To make this possible we need to expose two
functions from drm_crtc.c though. To avoid further namespace pollution
in the system wide headers create a new internal header for such drm
internal symbols.

I expect that longer-term we'll add tons more, but since my goal here
is to polish the kerneldoc that's for another day.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:40 +01:00
Daniel Vetter 6395138505 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
There's not really any value in stating that no locking is needed. And
even if the comment is useful, a check for the right mutex at the
beginning of the function is better since that can't be ingored as
easily as a bit of documentation.

Note that drm_mode_probed_add in drm_crtc.c is also changed, the next
patch will move this into drm_modes.c

v2: Don't add locking WARN_ONs where it is not strictly required (i.e.
the two functions to validate/prune mode lists).

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:39 +01:00
Daniel Vetter 69fa5293bf drm/kms: rip out drm_mode_connector_detach_encoder
It's only used by imx, and that one gets it wrong - there's no need
to deteach the encoder before removing it.

And really, neither current drm modesetting code nor all the userspace
we have can handle dynamic changes in the set of possible encoders for
a given connector. So let's just remove this before someone starts
doing something really nasty with it.

As a plus, one less kerneldoc comment to write.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:38 +01:00
Jesse Barnes ac1bb36c4e drm: expose subpixel order name routine v3
Just like we have for connector type etc.

v2: drop static array (Chris)
v3: add kdoc (Daniel)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-12 18:53:04 +01:00
Dave Airlie 45ab1e0780 drm/tegra: Changes for v3.14-rc1 (update)
These patches fix some issues caused by the DRM panel support from the
 previous pull request and add two more panels (for the Toshiba AC100 as
 well as the Seaboard and Ventana).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4TK6AAoJEN0jrNd/PrOhwXoP/i09xa9CKOnpy8Ewdmgi5gBt
 vnjzqjwmHzZRpNeWw2xvcqzv5kKgXkpPdMhNUjErlJTUC1S6uCf/Uj+ExppYYysW
 7uxNjPQQc6jgX+0342MabKITeZyTk9iEWPqTDtHDP5O2vXi4XSaQTMm9HpWGe1qZ
 1CTb0yJc1epXGJPutlqhJSZgKwzrs6Pm2Q/nsTdxpGPAoTQj9J0NebDaZwJmmFGi
 qNyfI4DVBp1sj8AgtUkQQn9x5oLDpdvHKLPHsAWgHnNTKqRxY8C0EL+S2TYGa812
 sx8jvZgjvBoPuwaOr4hcOx91OFdfOoKVap9D/corU+UjstF9lTd+PvAHzZMO5qte
 yQhWmYFn1gGr/I9b9K/mAB98s83W7lMmSs/7HtiawvLtogZ/t8xvSp94R7X8SGd1
 wYcw3NqzgDxrcpJjDOsLIw1Pa4PxXoChtV0SfiaEoVlGn5WSONS/8cKeNwbO6e9D
 gKkd/zvCMsYqHt7p8zDizcQKi4W+8zYiZySOfLohZzhf0qaoQnnD5yirfiIpljqA
 Ql40F4XP3OF3CliikcSwFhvrTUCLb08Ol0MV6FX1H1iMae0dgiFqtz7AihFTbKHZ
 PQeskMgEemxhIqKEsH0JcpV3+YxLRlWy/3I+OO7QczsL0xKD30FQ9Xhsu9EFx8gu
 jXVvMDldeefaVBuTdqCb
 =NfNj
 -----END PGP SIGNATURE-----

Merge tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v3.14-rc1 (update)

These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).

* tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Obtain head number from DT
  drm/panel: update EDID BLOB in panel_simple_get_modes()
  gpu: host1x: Remove unnecessary include
  drm/tegra: Use proper data type
  drm/tegra: Clarify how panel modes override others
  drm/tegra: Fix possible CRTC mask for RGB outputs
  drm/i915: Use drm_encoder_crtc_ok()
  drm: Move drm_encoder_crtc_ok() to core
  drm: provide a helper for the encoder possible_crtcs mask
  drm/tegra: Don't check resource with devm_ioremap_resource()
  drm/panel: Add support for Chunghwa CLAA101WA01A panel
  drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-29 12:03:56 +10:00
Russell King db5f7a6e78 drm: provide a helper for the encoder possible_crtcs mask
The encoder possible_crtcs mask identifies which CRTCs can be bound to
a particular encoder.  Each bit from bit 0 defines an index in the list
of CRTCs held in the DRM mode_config crtc_list.  Rather than having
drivers trying to track the position of their CRTCs in the list, expose
the code which already exists for calculating the appropriate mask bit
for a CRTC.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[treding@nvidia.com: add drm_crtc_index(), move to core]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-14 14:35:02 +01:00
Ville Syrjälä 73e9efd4bd drm: Push dirtyfb ioctl kms locking down to drivers
Not all drivers will need take all the modeset locks for dirtyfb, so
push the locking down to the drivers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-18 10:49:08 +10:00
Ville Syrjälä 23c453a4af drm: Pretty print pixel format in drm_fb_get_bpp_depth() and format_check()
drm_fb_get_bpp_depth() likes to complain about unsupported pixel formats
but doesn't bother telling us what the format was. Also format_check()
just returns an error when it encouters an invalid format, leaving the
user scratching his head trying to figure out why addfb failed. Make
life a bit easier by using drm_get_format_name() in both places.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 13:29:34 +10:00
Ville Syrjälä 37c4e705fc drm: Return -ENOENT when a framebuffer can't be found
Return -ENOENT for framebuffers like we do for other mode objects that
can't be found.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 13:25:18 +10:00
Ville Syrjälä f27657f2ea drm: Consistently return -ENOENT when a mode object can't be found
We tend to return -EINVAL for everything. Let's try to help poor
userland developers a bit by at least returning -ENONET for missing
objects.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 13:25:17 +10:00
Marc-André Lureau 74afee7dd9 drm: fix a small spelling
Fix a little spelling of drm_crtc_convert_umode() comment.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-23 14:21:06 +01:00
Damien Lespiau 5848ad409c drm: Reject stereo modes with an unknown layout
The kernel shouldn't accept invalid modes, just say No.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:45 +02:00
Damien Lespiau fc4833c17c drm: Revert "drm: Reject modes with more than 1 stereo flags set"
Now that the coding of stereo layout has changed from a bit field to an
enum, we need remove that check.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:45 +02:00
Damien Lespiau a0c1bbb0cc drm: Check the fb size against the adjusted v/hdisplay for stereo modes
Some stereo modes, like frame packing, need a larger CRTC viewport than
the "natural" underlying 2D mode and thus drm_crtc_check_viewport()
needs to query the adjusted mode to use the correct h/vdisplay.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:37 +02:00
Damien Lespiau c11e928360 drm: Factor out common CRTC viewport checking code
Both setcrtc and page_flip are checking that the framebuffer is big
enough for the defined crtc viewport (x, y, hdisplay, vdisplay). Factor
that code out in a single function.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:36 +02:00
Damien Lespiau a3ff6d5609 drm: Reject modes with more than 1 stereo flags set
When setting a stereo 3D mode, there can be only one bit set describing
the layout of the frambuffer(s). So reject invalid modes early.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:29 +02:00
Damien Lespiau 61d8e32825 drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctl
This capability allows user space to control the delivery of modes with
the 3D flags set. This is to not play games with current user space
users not knowing anything about stereo 3D flags and that could try
to set a mode with one or several of those bits set.

So, the plan is to remove the stereo modes from the list of modes we
give to DRM clients by default, and let them through if we are being
told otherwise.

stereo_allowed is bound to the drm_file structure to make it a
per-client setting, not a global one.

v2: Replace clearing 3D flags by discarding the stereo modes now that
    they are regular modes.
v3: SET_CAP -> SET_CLIENT_CAP rename (Chris Wilson)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01 07:45:27 +02:00
Shobhit Kumar b89232732f drm: add MIPI DSI encoder and connector types
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-04 17:34:43 +02:00
David Herrmann 101b96f329 drm: fix DRM_IOCTL_MODE_GETFB handle-leak
DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:

  commit a14b1b4247
  Author: Mandeep Singh Baines <mandeep.baines@gmail.com>
  Date:   Fri Jan 20 12:11:16 2012 -0800

      drm: remove master fd restriction on mode setting getters

However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.

With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.

For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.

v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t

Cc: <stable@vger.kernel.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02 10:51:36 +10:00
Sean Paul 3b336ec4c5 drm: Add drm_bridge
This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02 10:23:26 +10:00
Keith Packard 62f2104f3f drm: Advertise async page flip ability through GETCAP ioctl
Let applications know whether the kernel supports asynchronous page
flipping.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30 09:25:13 +10:00
Keith Packard ed8d19756e drm: Pass page flip ioctl flags to driver
This lets drivers see the flags requested by the application

[airlied: fixup for rcar/imx/msm]

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30 09:24:54 +10:00
Lespiau, Damien 86f422d5be drm: Make drm_mode_remove() static
It's only used in drm_crtc.c.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21 12:47:29 +10:00
Lespiau, Damien ddecb10cf4 drm: Remove drm_mode_create_dithering_property()
This was last used by nouveau, replaced by a driver-specific property
in:

  commit de69185573
  Author: Ben Skeggs <bskeggs@redhat.com>
  Date:   Mon Oct 17 12:23:41 2011 +1000

      drm/nouveau: improve dithering properties, and implement proper auto mode

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-21 12:47:19 +10:00
Ilia Mirkin b21e3afe23 drm: use ida to allocate connector ids
This makes it so that reloading a module does not cause all the
connector ids to change, which are user-visible and sometimes used
for configuration.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19 10:40:31 +10:00
Dave Airlie 4c813d4d75 drm: add hotspot support for cursors.
So it looks like for virtual hw cursors on QXL we need to inform
the "hw" device what the cursor hotspot parameters are. This
makes sense if you think the host has to draw the cursor and interpret
clicks from it. However the current modesetting interface doesn't support
passing the hotspot information from userspace.

This implements a new cursor ioctl, that takes the hotspot info as well,
userspace can try calling the new interface and if it gets -ENOSYS it means
its on an older kernel and can just fallback.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28 09:13:39 +10:00
Daniel Vetter 5cef29aa52 drm: fix fb leak in setcrtc
Drivers are allowed (actually have to) disable unrelated crtcs in
their ->set_config callback (when we steal all the connectors from
that crtc). If they do that they'll clear crtc->fb to NULL.

Which results in a refcount leak, since the drm core is keeping track
of that reference.

To fix this track the old fb of all crtcs and adjust references for
all of them. Of course, since we only hold an additional reference for
the fb for the current crtc we need to increase refcounts before we
drop the old one.

This approach has the benefit that it inches us a bit closer to an
atomic modeset world, where we want to update the config of all crtcs
in one step.

This regression has been introduce in the framebuffer refcount
conversion, specifically in

commit b0d1232589
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 11 01:07:12 2012 +0100

    drm: refcounting for crtc framebuffers

Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-25 13:04:11 +10:00
Daniel Vetter cc85e1217f drm: check that ->set_config properly updates the fb
Historically drm lacked fb refcounting, so the updating of crtc->fb
was done by the lower levels at a point convenient to get their own
refcounting (e.g. refcounts for the underlying gem bo, pinning
refcounts) right. With the introduction of refcounted fbs the drm core
handled the fb refcounts, but still relied on drivers to update the
crtc->fb pointer (this approach required the least invasive changes in
drivers).

Enforce this contract with a WARN_ON.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-25 13:04:10 +10:00
Ville Syrjälä 778ad903f9 drm: Remove some unused stuff from drm_plane
There's a bunch of unused members inside drm_plane, bloating the size of
the structure needlessly. Eliminate them.

v2: Remove all of it from kernel-doc too

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-17 19:42:46 +10:00
Ville Syrjälä 35f2c3ae76 drm: Add kernel-doc for plane functions
v2: Follow the drm_crtc documentation fixes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-17 18:34:40 +10:00
Ville Syrjälä 9125e61868 drm: Add drm_plane_force_disable()
drm_plane_force_disable() will forcibly disable the plane even if user
had previously requested the plane to be enabled.

This can be used to force planes to be off when restoring the fbdev
mode.

The code was simply pulled from drm_framebuffer_remove(), which now
calls the new function as well.

v2: Check plane->fb in drm_plane_force_disable(), drop bogus comment
    about disabling crtc

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-17 18:32:54 +10:00
Ville Syrjälä ad6f5c3433 drm: Improve drm_crtc documentation
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-11 08:40:37 +10:00
Ville Syrjälä 990256aec2 drm: Add probed modes in probe order
Keeping the modes in the same order as we probe them makes it a bit
easier to track what's happening.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-11 08:35:04 +10:00
Ville Syrjälä d20d317480 drm: Constify the pretty-print functions
The structures and strings involved with various pretty-print functions
aren't meant to be modified, so make them all const. The exception is
drm_connector_enum_list which does get modified in drm_connector_init().

While at it move the drm_get_connector_status_name() prototype from
drmP.h to drm_crtc.h where it belongs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-11 08:13:56 +10:00
Ville Syrjälä 6ba6d03e69 drm: Print pretty names for pixel formats
Rather than just printing the pixel format as a hex number, decode the
fourcc into human readable form, and also decode the LE vs. BE flag.

Keep printing the raw hex number too in case it contains non-printable
characters.

Some examples what the new drm_get_format_name() produces:
DRM_FORMAT_XRGB8888: "XR24 little-endian (0x34325258)"
DRM_FORMAT_YUYV: "YUYV little-endian (0x56595559)"
DRM_FORMAT_RGB565|DRM_FORMAT_BIG_ENDIAN: "RG16 big-endian (0xb6314752)"
Unprintable characters: "D??? big-endian (0xff7f0244)"

v2: Fix patch author

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-11 08:13:54 +10:00
Lespiau, Damien ed7951dc13 drm: Make the HPD status updates debug logs more readable
Instead of just printing "status updated from 1 to 2", make those enum
numbers immediately readable.

v2: Also patch output_poll_execute() (Daniel Vetter)
v3: Use drm_get_connector_status_name (Ville Syrjälä)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (for v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-13 12:12:57 +10:00
Dave Airlie f3c58ceef0 Merge branch 'for-linux-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
A few intel fixes for smaller issues and one revert for an sdv hack which
we've wanted to kill anyway. Plus two drm patches included for your
convenience, both regression fixers for mine own screw-ups.

+ both fixes for stolen mem handling.

* 'for-linux-next' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: clear the stolen fb before resuming
  Revert "drm/i915: Calculate correct stolen size for GEN7+"
  drm/i915: hsw: fix link training for eDP on port-A
  Revert "drm/i915: revert eDP bpp clamping code changes"
  drm: don't check modeset locks in panic handler
  drm/i915: Fix pipe enabled mask for pipe C in WM calculations
  drm/mm: fix dump table BUG
  drm/i915: Always normalize return timeout for wait_timeout_ioctl
2013-05-10 14:35:48 +10:00
Daniel Vetter a9b054e8ab drm: don't check modeset locks in panic handler
Since we know that locking is broken in that case and it's more
important to not flood the dmesg with random gunk.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
References: http://lkml.kernel.org/r/20130502000206.GH15623@pd.tnic
Cc: stable@vger.kernel.org
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-02 22:44:16 +02:00
Ville Syrjälä c55b6b3da2 drm: Kill user_modes list and the associated ioctls
There is no way to use modes added to the user_modes list. We never
look at the contents of said list in the kernel, and the only operations
userspace can do are attach and detach. So the only "benefit" of this
interface is wasting kernel memory.

Fortunately it seems no real user space application ever used these
ioctls. So just kill them.

Also remove the prototypes for the non-existing drm_mode_addmode_ioctl()
and drm_mode_rmmode_ioctl() functions.

v2: Use drm_noop instead of completely removing the ioctls

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-30 10:03:07 +10:00
Ville Syrjälä ea9cbb063c drm: Silence some sparse warnings
drivers/gpu/drm/drm_pci.c:155:5: warning: symbol 'drm_pci_set_busid' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:197:5: warning: symbol 'drm_pci_set_unique' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:269:5: warning: symbol 'drm_pci_agp_init' was not declared. Should it be static?

drivers/gpu/drm/drm_crtc.c:181:1: warning: symbol 'drm_get_dirty_info_name' was not declared. Should it be static?
drivers/gpu/drm/drm_crtc.c:1123:5: warning: symbol 'drm_mode_group_init' was not declared. Should it be static?

drivers/gpu/drm/drm_modes.c:918:6: warning: symbol 'drm_mode_validate_clocks' was not declared. Should it be static?

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-30 10:02:25 +10:00
Laurent Pinchart 909d9cda2e drm: Don't allow page flip to change pixel format
A page flip is not a mode set, changing the frame buffer pixel format
doesn't make sense and isn't handled by most drivers anyway. Disallow
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-22 19:48:21 +10:00
Laurent Pinchart 87d24fc3ab drm: Destroy property blobs at mode config cleanup time
Property blob objects need to be destroyed when cleaning up to avoid
memory leaks. Go through the list of all blobs in the
drm_mode_config_cleanup() function and destroy them.

The drm_mode_config_cleanup() function needs to be moved after the
drm_property_destroy_blob() declaration. Move drm_mode_config_init() as
well to keep the functions together.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-16 13:11:44 +10:00
archit taneja 9131d3d87b drm: cleanup: use drm_framebuffer_reference instead of a kref_get
drm_framebuffer_lookup() does a kref_get() for the framebuffer if it finds one
corresponding to the fb id passed to it. Use drm_framebuffer_reference() instead
for clarity since it's the function used in other places to take a reference.

Signed-off-by: Archit Taneja <archit@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-12 14:08:15 +10:00
Daniel Vetter 8abbbaf6ad drm: don't unlock in the addfb error paths
We don't grab the modeset locks any more since

commit 468174f748
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 11 00:09:12 2012 +0100

    drm: push modeset_lock_all into ->fb_create driver callbacks

Reported-by: Ray Strode <rstrode@redhat.com>
Cc: Ray Strode <rstrode@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 21:47:32 +01:00
Tejun Heo 2e928815c1 drm: convert to idr_alloc()
Convert to the much saner new idr interface.

* drm_ctxbitmap_next() error handling in drm_addctx() seems broken.
  drm_ctxbitmap_next() return -errno on failure not -1.

[artem.savkov@gmail.com: missing idr_preload_end in drm_gem_flink_ioctl]
[jslaby@suse.cz: fix drm_gem_flink_ioctl() return value]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:15 -08:00
Tejun Heo 4d53233a36 drm: don't use idr_remove_all()
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated.  Drop its usage.

* drm_ctxbitmap_cleanup() was calling idr_remove_all() but forgetting
  idr_destroy() thus leaking all buffered free idr_layers.  Replace it
  with idr_destroy().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:13 -08:00
Thierry Reding 8cf1e98114 drm: Add consistency check for page-flipping
Driver implementations of the drm_crtc's .page_flip() function are
required to update the crtc->fb field on success to reflect that the new
framebuffer is now in use. This is important to keep reference counting
on the framebuffers balanced.

While at it, document this requirement to keep others from falling into
the same trap.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-22 08:21:07 +01:00
Dave Airlie b81e059ec5 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
So here's my promised pile of fixes for 3.9. I've dropped the core prep
patches for vt-switchless suspend/resume as discussed on irc. Highlights:
- Fix dmar on g4x. Not really gfx related, but I'm fed up with getting
  blamed for dmar crapouts.
- Disable wc ptes updates on ilk when dmar is enabled (Chris). So again,
  dmar, but this time gfx related :(
- Reduced range support for hsw, using the pipe CSC (Ville).
- Fixup pll limits for gen3/4 (Patrick Jakobsson). The sdvo patch is
  already confirmed to fix 2 bug reports, so added cc: stable on that one.
- Regression fix for 8bit fb console (Ville).
- Preserve lane reversal bits on DDI/FDI ports (Damien).
- Page flip vs. gpu hang fixes (Ville). Unfortuntely not quite all of
  them, need to decide what to do with the currently still in-flight ones.
- Panel fitter regression fix from Mika Kuoppala (was accidentally left on
  on some pipes with the new modset code since 3.7). This also improves
  the modeset sequence and might help a few other unrelated issues with
  lvds.
- Write backlight regs even harder ... another installement in our eternal
  fight against the BIOS and backlights.
- Fixup lid notifier vs. suspend/resume races (Zhang Rui). Prep work for
  new ACPI stuff, but closing the race itself seems worthwile on its own.
- A few other small fixes and tiny cleanups all over.

Lots of the patches are cc: stable since I've stalled on a few
not-so-important fixes for 3.8 due to the grumpy noise Linus made.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (33 commits)
  intel/iommu: force writebuffer-flush quirk on Gen 4 Chipsets
  drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK
  drm/i915: Implement pipe CSC based limited range RGB output
  drm/i915: inverted brightness quirk for Acer Aspire 4736Z
  drm/i915: Print the hw context status is debugfs
  drm/i915: Use HAS_L3_GPU_CACHE in i915_gem_l3_remap
  drm/i915: Fix PIPE_CONTROL DW/QW write through global GTT on IVB+
  drm/i915: Set i9xx sdvo clock limits according to specifications
  drm/i915: Set i9xx lvds clock limits according to specifications
  drm/i915: Preserve the DDI link reversal configuration
  drm/i915: Preserve the FDI line reversal override bit on CPT
  drm/i915: add missing \n to UTS_RELEASE in the error_state
  drm: Use C8 instead of RGB332 when determining the format from depth/bpp
  drm: Fill depth/bits_per_pixel for C8 format
  drm/i915: don't clflush gem objects in stolen memory
  drm/i915: Don't wait for page flips if there was GPU reset
  drm/i915: Kill obj->pending_flip
  drm/i915: Fix a typo in a intel_modeset_stage_output_state() comment
  drm/i915: remove bogus mutex_unlock from error-path
  drm/i915: Print the pipe control page GTT address
  ...
2013-02-20 11:41:26 +10:00
Ville Syrjälä d84f031bd2 drm: Use C8 instead of RGB332 when determining the format from depth/bpp
Support for real RGB332 is a rarity, most hardware only really support
C8. So use C8 instead of RGB332 when determining the format based on
depth/bpp.

This fixes 8bpp fbcon on i915, since i915 will only accept C8 and not
RGB332.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59572
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Tested-by: mlsemon35@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-20 00:21:44 +01:00
Ville Syrjälä c51a6bc5f6 drm: Fill depth/bits_per_pixel for C8 format
Set depth/bits_per_pixel to 8 for C8 format.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-20 00:21:43 +01:00
Daniel Vetter 35f8badc1c drm: Don't set the plane->fb to NULL on successfull set_plane
We need to clear the local variable to get the refcounting right
(since the reference drm_mode_setplane holds is transferred to the
plane->fb pointer). But should be done _after_ we update the pointer.

Breakage introduced in

commit 6c2a75325c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 11 00:59:24 2012 +0100

    drm: refcounting for sprite framebuffers

Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Rob Clark <rob@ti.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-20 08:47:54 +10:00
Daniel Vetter 6aed8ec3f7 drm: review locking for drm_fb_helper_restore_fbdev_mode
... it's required. Fix up exynos and the cma helper, and add a
corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode.

Note that tegra calls the fbdev cma helper restore function also from
it's driver-load callback. Which is a bit against current practice,
since usually the call is only from ->lastclose, and initial setup is
done by drm_fb_helper_initial_config.

Also add the relevant drm DocBook entry.

v2: Add promised WARN to restore_fbdev_mode.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14 00:07:50 +01:00
Daniel Vetter 7b24056be6 drm: don't hold crtc mutexes for connector ->detect callbacks
The coup de grace of the entire journey. No more dropped frames every
10s on my testbox!

I've tried to audit all ->detect and ->get_modes callbacks, but things
became a bit fuzzy after trying to piece together the umpteenth
implemenation. Afaict most drivers just have bog-standard output
register frobbing with a notch of i2c edid reading, nothing which
could potentially race with the newly concurrent pageflip/set_cursor
code. The big exception is load-detection code which requires a
running pipe, but radeon/nouveau seem to to this without touching any
state which can be observed from page_flip (e.g. disabled crtcs
temporarily getting enabled and so a pageflip succeeding).

The only special case I could find is the i915 load detect code. That
uses the normal modeset interface to enable the load-detect crtc, and
so userspace could try to squeeze in a pageflip on the load-detect
pipe. So we need to grab the relevant crtc mutex in there, to avoid
the temporary crtc enabling to sneak out and be visible to userspace.

Note that the sysfs files already stopped grabbing the per-crtc locks,
since I didn't want to bother with doing a interruptible
modeset_lock_all. But since there's very little in-between breakage
(essentially just the ability for userspace to pageflip on load-detect
crtcs when it shouldn't on the i915 driver) I figured I don't need to
bother.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:15 +01:00
Daniel Vetter b4d5e7d1db drm: only grab the crtc lock for pageflips
The pagelip ioctl itself is rather simply, so the hard work for this
patch is auditing all the drivers:

- exynos: Pageflip is protect with dev->struct_mutex and ...
  synchronous. But nothing fancy going on, besides a check whether the
  crtc is enabled, which should probably be somewhere in the drm core
  so that we have unified behaviour across all drivers.

- i915: hw-state is protected with dev->struct_mutex, the delayed
  unpin work together with the other stuff the pageflip complete irq
  handler needs is protected by the event_lock spinlock.

- nouveau: With the pin/unpin functions fixed, everything looks safe:
  A bit of ttm wrestling and refcounting, and a few channel accesses.
  The later are either already proteced sufficiently, or are now safe
  with the channel locking introduced to make cursor updates safe.

- radeon: The irq_get/put functions look a bit race, since the
  atomic_inc/dec isn't protect with locks. Otoh they're all per-crtc,
  so we should be safe with per-crtc locking from the drm core. Then
  there's tons of per-crtc register access, which could potentially go
  through the indirect reg acces. But that's fixed to make cursor
  updates concurrent. Bookeeping for the drm even is also protected
  with the even_lock, which also protects against the pageflip irq
  handler since radeon hw seems to have no way to queue these up
  asynchronously. Otherwise just a bit of ttm-based buffer handling
  and fencing, which is now safe with the previous patch to hold
  bdev->fence_lock while grabbing the ttm fence.

- shmob: Only one crtc. That's an easy one ...

- vmwgfx: As usual a bit special with tons different things:
  - Flippable check using is_implicit and num_implicit. Changes to
    those seem to be nicely covered with the global modeset lock, so
    we should be fine.
  - Some dirty cliprect handling stuff, or at least that is my guess.
    Looks like it's fine since either it's per-crtc, invariant or
    (like the execbuf stuff launched) protected otherwise.
  - Adding the actual flip to the fence_event list. On a quick look
    this seems to have solid locking in place, too.
  ... but generally this is all way over my head.

- imx: Impressive display of races between the page_flip
  implementation and the irq handler. Also, ipu_drm_set_base which
  gets eventually called from the irq handler to update the display
  base isn't really protected against concurrent set_config calls from
  process context.  In any case, going for per-crtc locking won't make
  this worse, so nothing to do.

- omap: The new async callback code merged into 3.8 seems to have
  solid locking in place, and there doesn't seem to be any shared
  state at risk. Especially since the callbacks still use
  modeset_lock_all and are so not converted.

v2: Update omapdrm analysis to 3.8 code per the discussion with Rob
Clark.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:13 +01:00
Daniel Vetter b62584e366 drm: optimize drm_framebuffer_remove
Now that all framebuffer usage is properly refcounted, we are no
longer required to hold the modeset locks while dropping the last
reference. Hence implemented a fastpath which avoids the potential
stalls associated with grabbing mode_config.lock for the case where
there's no other reference around.

Explain in a big comment why it is safe. Also update kerneldocs with
the new locking rules around drm_framebuffer_remove.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:12 +01:00
Daniel Vetter b0d1232589 drm: refcounting for crtc framebuffers
With the prep patch to encapsulate ->set_crtc calls, this is now
rather easy. Hooray for inconsistent semantics between ->set_crtc and
->page_flip, where the driver callback is supposed to update the fb
pointer, and ->update_plane, where the drm core does the same.

Also, since the drm core functions check crtc->fb before calling into
driver callbacks, we can't really reduce the critical sections
protected by the mode_config locks.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:09 +01:00
Daniel Vetter 6c2a75325c drm: refcounting for sprite framebuffers
Now plane->fb holds a reference onto it's framebuffer. Nothing too
fancy going on here:
- Extract __drm_framebuffer_unreference to be called when we know
  we're not dropping the last reference, e.g. useful in the fb cleanup
  code.
- Reduce the locked sections in the set_plane ioctl to only protect
  plane->fb/plane->crtc and the driver callback (i.e. hw state).
  Everything either doesn't disappear (crtc, plane) or is refcounted
  (fb), and all the data we check is invariant over the respective
  object's lifetimes.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:08 +01:00
Daniel Vetter 4ccf097f19 drm: fb refcounting for dirtyfb_ioctl
We only need to ensure that the fb stays around for long enough. While
at it, only grab the modeset locks when we need them (since most
drivers don't implement the dirty callback, this should help jitter
and stalls when using the generic modeset driver).

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:06 +01:00
Daniel Vetter 58c0dca106 drm: don't take modeset locks in getfb ioctl
We only need to push the fb unreference a bit down. While at it,
properly pass the return value from ->create_handle back to userspace.

Most drivers either return -ENODEV if they don't have a concept of
buffer objects (ast, cirrus, ...) or just install a handle for the
underlying gem object (which is ok since we hold a reference on that
through the framebuffer).

v2: Split out the ->create_handle rework in the individual drivers.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:05 +01:00
Daniel Vetter 468174f748 drm: push modeset_lock_all into ->fb_create driver callbacks
And drop it where it's not needed. Most driver just lookup the gem
object, allocate an fb struct, fill in all the useful fields and then
register it with drm_framebuffer_init.

All of these operations are already separately locked, and since we
only put the fb into the fpriv->fbs list _after_ having called
->fb_create, we can't also race with rmfb. We can otoh race with other
ioctls that put the framebuffer to use, but all drivers have been
reorganized already to call drm_framebuffer_init last in the fb
creation sequence.

So essentially, we can completely remove any modeset locks from the
addfb ioctl paths. Yeah!

Also, reference-counting is solid - we get a reference from fb_create
which we transfer to the fpriv->fbs list. And after unlocking the
fpriv->fbs_lock we don't touch the framebuffer any longer. Furthermore
drm_framebuffer_init has added a 2nd reference for the idr lookup, and
any access through that table will do it's own refcounting.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:04 +01:00
Daniel Vetter 7d331595b0 drm: nest modeset locks within fpriv->fbs_lock
Atm we still need to unconditionally take the modeset locks in the
rmfb paths. But eventually we only want to take them if there are
other users around as a slow-path. This way sane userspace avoids
blocking on edid reads and other stuff in rmfb if it ensures that the
fb isn't used anywhere by a crtc/plane.

We can do a quick check for such other users once framebuffers are
properly refcounting by locking at the refcount - if it's more than 1,
there are other users left. Again, rmfb racing against other ioctls
isn't a real problem, userspace is allowed to shoot its foot.

This patch just prepares this by moving the modeset locks to nest
within fpriv->fbs_lock. Now the distinction between the fbs_lock and
the device-global fb_lock is clear, since we need to hold the fbs_lock
outside of any modeset_locks in fb_release.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:03 +01:00
Daniel Vetter 2b677e8c08 drm: reference framebuffers which are on the idr
Since otherwise looking and reference-counting around
drm_framebuffer_lookup will be an unmanageable mess. With this change,
an object can either be found in the idr and will stay around once we
incremented the reference counter. Or it will be gone for good and
can't be looked up using its id any more.

Atomicity is guaranteed by the dev->mode_config.fb_lock. The
newly-introduce fpriv->fbs_lock looks a bit redundant, but the next
patch will shuffle the locking order between these two locks and all
the modeset locks taken in modeset_lock_all, so we'll need it.

Also, since userspace could do really funky stuff and race e.g. a
getresources with an rmfb, we need to make sure that the kernel
doesn't fall over trying to look-up an inexistent fb, or causing
confusion by having two fbs around with the same id. Simply reset the
framebuffer id to 0, which marks it as reaped. Any lookups of that id
will fail, so the object is really gone for good from userspace's pov.

Note that we still need to protect the "remove framebuffer from all
use-cases" and the final unreference with the modeset-lock, since most
framebuffer use-sites don't implement proper reference counting yet.
We can only lift this once _all_ users are converted.

With this change, two references are held on alife, but unused
framebuffers:
- The reference for the idr lookup, created in this patch.
- For user-created framebuffers the fpriv->fbs reference, for
  driver-private fbs the driver is supposed to hold it's own last
  reference.

Note that the dev->mode_config.fb_list itself does _not_ hold a
reference onto the framebuffers (this list is essentially only used
for debugfs files). Hence if there's anything left there when the
driver has cleaned up all it's modeset resources, this is a ref-leak.
WARN about it.

Now we only need to fix up all other places to properly reference
count framebuffers.

v2: Fix spelling fail in a comment spotted by Rob Clark.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:01 +01:00
Daniel Vetter 362063619c drm: revamp framebuffer cleanup interfaces
We have two classes of framebuffer
- Created by the driver (atm only for fbdev), and the driver holds
  onto the last reference count until destruction.
- Created by userspace and associated with a given fd. These
  framebuffers will be reaped when their assoiciated fb is closed.

Now these two cases are set up differently, the framebuffers are on
different lists and hence destruction needs to clean up different
things. Also, for userspace framebuffers we remove them from any
current usage, whereas for internal framebuffers it is assumed that
the driver has done this already.

Long story short, we need two different ways to cleanup such drivers.
Three functions are involved in total:
- drm_framebuffer_remove: Convenience function which removes the fb
  from all active usage and then drops the passed-in reference.
- drm_framebuffer_unregister_private: Will remove driver-private
  framebuffers from relevant lists and drop the corresponding
  references. Should be called for driver-private framebuffers before
  dropping the last reference (or like for a lot of the drivers where
  the fbdev is embedded someplace else, before doing the cleanup
  manually).
- drm_framebuffer_cleanup: Final cleanup for both classes of fbs,
  should be called by the driver's ->destroy callback once the last
  reference is gone.

This patch just rolls out the new interfaces and updates all drivers
(by adding calls to drm_framebuffer_unregister_private at all the
right places)- no functional changes yet. Follow-on patches will move
drm core code around and update the lifetime management for
framebuffers, so that we are no longer required to keep framebuffers
alive by locking mode_config.mutex.

I've also updated the kerneldoc already.

vmwgfx seems to again be a bit special, at least I haven't figured out
how the fbdev support in that driver works. It smells like it's
external though.

v2: The i915 driver creates another private framebuffer in the
load-detect code. Adjust its cleanup code, too.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:17:00 +01:00
Daniel Vetter 786b99ed13 drm: create drm_framebuffer_lookup
And replace all fb lookups with it. Also add a WARN to
drm_mode_object_find since that is now no longer the blessed interface
to look up an fb. And add kerneldoc to both functions.

This only updates all callsites, but immediately drops the acquired
refence again. Hence all callers still rely on the fact that a mode fb
can't disappear while they're holding the struct mutex. Subsequent
patches will instate proper use of refcounts, and then rework the rmfb
and unref code to no longer serialize fb destruction with the
mode_config lock. We don't want that since otherwise a compositor
might end up stalling for a few frames in rmfb.

v2: Don't use kref_get_unless_zero - Greg KH doesn't like that kind of
interface.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:59 +01:00
Daniel Vetter 4b096ac10d drm: revamp locking around fb creation/destruction
Well, at least step 1. The goal here is that framebuffer objects can
survive outside of the mode_config lock, with just a reference held
as protection. The first step to get there is to introduce a special
fb_lock which protects fb lookup, creation and destruction, to make
them appear atomic.

This new fb_lock can nest within the mode_config lock. But the idea is
(once the reference counting part is completed) that we only quickly
take that fb_lock to lookup a framebuffer and grab a reference,
without any other locks involved.

vmwgfx is the only driver which does framebuffer lookups itself, also
wrap those calls to drm_mode_object_find with the new lock.

Also protect the fb_list walking in i915 and omapdrm with the new lock.

As a slight complication there's also the list of user-created fbs
attached to the file private. The problem now is that at fclose() time
we need to walk that list, eventually do a modeset call to remove the
fb from active usage (and are required to be able to take the
mode_config lock), but in the end we need to grab the new fb_lock to
remove the fb from the list. The easiest solution is to add another
mutex to protect this per-file list.

Currently that new fbs_lock nests within the modeset locks and so
appears redudant. But later patches will switch around this sequence
so that taking the modeset locks in the fb destruction path is
optional in the fastpath. Ultimately the goal is that addfb and rmfb
do not require the mode_config lock, since otherwise they have the
potential to introduce stalls in the pageflip sequence of a compositor
(if the compositor e.g. switches to a fullscreen client or if it
enables a plane). But that requires a few more steps and hoops to jump
through.

Note that framebuffer creation/destruction is now double-protected -
once by the fb_lock and in parts by the idr_lock. The later would be
unnecessariy if framebuffers would have their own idr allocator. But
that's material for another patch (series).

v2: Properly initialize the fb->filp_head list in _init, otherwise the
newly added WARN to check whether the fb isn't on a fpriv list any
more will fail for driver-private objects.

v3: Fixup two error-case unlock bugs spotted by Richard Wilbur.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:58 +01:00
Daniel Vetter dac35663ce drm: only take the crtc lock for ->cursor_move
->cursor_move uses mostly the same facilities in drivers as
->cursor_set, so pretty much nothing to fix up:

- ast/gma500/i915: They all use per-crtc registers to update the
  cursor position. ast again touches the global cursor cache, but
  that's ok since there's only one crtc.

- nouveau: nv50+ is again special, updates happen through the per-crtc
  channel (without pushbufs), so it's not protected by the new evo
  lock introduced earlier. But since this channel is per-crtc, we
  should be fine anyway.

- radeon: A bit a mess: avivo asics need a workaround when both output
  pipes are enabled, which means it'll access the crtc list. Just
  reading that flag is ok though as long as radeon _always_ grabs all
  locks when changing the crtc configuration. Which means with the
  current scheme it cannot do an optimized modeset which only locks
  the relevant crtcs. This can be fixed though by introducing a bit of
  global state with separate locks and ensure in the modeset code that
  the cursor will be updated appropriately when enabling the 2nd pipe
  (on affected asics).

- vmwgfx: I still don't understand what it's doing exactly, so apply
  the same trick for now.

v2: Fixup unlocking for the error cases, spotted by Richard Wilbur.

v3: Another error-case fixup.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:57 +01:00
Daniel Vetter bfb899282f drm: only take the crtc lock for ->cursor_set
First convert ->cursor_set to only take the crtc lock, since that
seems to be the function with the least amount of state - the core
ioctl function doesn't check anything which can change at runtime, so
we don't have any object lifetime issues to contend.

The only thing which is important is that the driver's implementation
doesn't touch any state outside of that single crtc which is not yet
properly protected by other locking:

- ast: access the global ast->cache_kmap. Luckily we only have on crtc
  on this driver, so this is fine. Add a comment.

- gma500: calls gma_power_begin|and and psb_gtt_pin|unpin, both which
  have their own locking to protect their state. Everything else is
  crtc-local.

- i915: touches a bit of global gem state, all protected by the One
  Lock to Rule Them All (dev->struct_mutex).

- nouveau: Pre-nv50 is all nice, nv50+ uses the evo channels to queue
  up all display changes. And some of these channels are device
  global. But this is fine now since the previous patch introduced an
  evo channel mutex.

- radeon: Uses some indirect register access for cursor updates, but
  with the previous patches to protect these indirect 2-register
  access patterns with a spinlock, this should be fine now, too.

- vmwgfx: I have no idea how that works - update_cursor_position
  doesn't take any per-crtc argument and I haven't figured out any
  other place where this could be set in some form of a side-channel.
  But vmwgfx definitely has more than one crtc (or at least can
  register more than one), so I have no idea how this is supposed to
  not fail with the current code already. Hence take the easy way out
  and simply acquire all locks (which requires dropping the crtc lock
  the core acquired for us). That way it's not worse off for
  consistency than the old code.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:55 +01:00
Daniel Vetter 29494c174d drm: add per-crtc locks
*drumroll*

The basic idea is to protect per-crtc state which can change without
touching the output configuration with separate mutexes, i.e.  all the
input side state to a crtc like framebuffers, cursor settings or plane
configuration. Holding such a crtc lock gives a read-lock on all the
other crtc state which can be changed by e.g. a modeset.

All non-crtc state is still protected by the mode_config mutex.
Callers that need to change modeset state of a crtc (e.g. dpms or
set_mode) need to grab both the mode_config lock and nested within any
crtc locks.

Note that since there can only ever be one holder of the mode_config
lock we can grab the subordinate crtc locks in any order (if we need
to grab more than one of them). Lockdep can handle such nesting with
the mutex_lock_nest_lock call correctly.

With this functions that only touch connectors/encoders but not crtcs
only need to take the mode_config lock. The biggest such case is the
output probing, which means that we can now pageflip and move cursors
while the output probe code is reading an edid.

Most cases neatly fall into the three buckets:
- Only touches connectors and similar output state and so only needs
  the mode_config lock.
- Touches the global configuration and so needs all locks.
- Only touches the crtc input side and so only needs the crtc lock.

But a few cases that need special consideration:

- Load detection which requires a crtc. The mode_config lock already
  prevents a modeset change, so we can use any unused crtc as we like
  to do load detection. The only thing to consider is that such
  temporary state changes don't leak out to userspace through ioctls
  that only take the crtc look (like a pageflip). Hence the load
  detect code needs to grab the crtc of any output pipes it touches
  (but only if it touches state used by the pageflip or cursor
  ioctls).

- Atomic pageflip when moving planes. The first case is sane hw, where
  planes have a fixed association with crtcs - nothing needs to be
  done there. More insane^Wflexible hw needs to have plane->crtc
  mapping which is separately protect with a lock that nests within
  the crtc lock. If the plane is unused we can just assign it to the
  current crtc and continue. But if a plane is already in use by
  another crtc we can't just reassign it.

  Two solution present themselves: Either go back to a slow-path which
  takes all modeset locks, potentially incure quite a hefty delay. Or
  simply disallowing such changes in one atomic pageflip - in general
  the vblanks of two crtcs are not synced, so there's no sane way to
  atomically flip such plane changes accross more than one crtc. I'd
  heavily favour the later approach, going as far as mandating it as
  part of the ABI of such a new a nuclear pageflip.

  And if we _really_ want such semantics, we can always get them by
  introducing another pageflip mutex between the mode_config.mutex and
  the individual crtc locks. Pageflips crossing more than one crtc
  would then need to take that lock first, to lock out concurrent
  multi-crtc pageflips.

- Optimized global modeset operations: We could just take the
  mode_config lock and then lazily lock all crtc which are affected by
  a modeset operation. This has the advantage that pageflip could
  continue unhampered on unaffected crtc. But if e.g. global resources
  like plls need to be reassigned and so affect unrelated crtcs we can
  still do that - nested locking works in any order.

This patch just adds the locks and takes them in drm_modeset_lock_all,
no real locking changes yet.

v2: Need to initialize the new lock in crtc_init and lock it righ
away, for otherwise the modeset_unlock_all below will try to unlock a
not-locked mutex.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:54 +01:00
Daniel Vetter 8484990325 drm: add drm_modeset_lock|unlock_all
This is the first step towards introducing the new modeset locking
scheme. The plan is to put helper functions into place at all the
right places step-by-step, so that the final patch to switch on the
new locking scheme doesn't need to touch every single driver.

This helper here will serve as the shotgun solutions for all places
where a more fine-grained locking isn't (yet) implemented.

v2: Fixup kerneldoc for unlock_all.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 22:16:38 +01:00
Daniel Vetter 2d13b6796e drm: encapsulate crtc->set_config calls
With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 15:57:58 +01:00
Daniel Vetter af26ef3b39 drm/<drivers>: Unified handling of unimplemented fb->create_handle
Some drivers don't have real ->create_handle callbacks.

- cirrus/ast/mga200: Returns either 0 or -EINVAL.

- udl: Didn't even bother with a callback, leading to a nice
  userspace-triggerable OOPS.

- vmwgfx: This driver bothered with an implementation to return 0 as
  the handle (which is the canonical no-obj gem handle).

All have in common that ->create_handle doesn't really make too much
sense for them - that ioctl is used only for seamless fb takeover in
the radeon/nouveau/i915 ddx drivers. So allow drivers to not implement
this and return a consistent -ENODEV.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 15:57:57 +01:00
Daniel Vetter 7147573a5c drm/gma500: move fbcon restore to lastclose
Doing this within the fb->destroy callback leads to a locking
nightmare. And all other drm drivers that restore the fbcon do
it in lastclose, too.

With this adjustments all fb->destroy callbacks optionally drop
references to any gem objects used as backing storage, call
drm_framebuffer_cleanup and then kfree the struct. Which nicely
simplifies the locking for framebuffer unreferencing and freeing,
since this doesn't require that we hold the mode_config lock. A
slight exception is the vmwgfx surface backed framebuffer, it also
calls drm_master_put and removes the object from a device-private
framebuffer list. Both seem to have solid locking in place already.

Conclusion is that now it is no longer required to hold the
mode_config lock while freeing a framebuffer.

v2: Drop the corresponding mutex_lock WARN check from
drm_framebuffer_unreference.

v3: Use just the mode_config lock not modeset_lock_all, due to patch
reordering.

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 15:57:21 +01:00
Daniel Vetter 065a50ed3e drm/doc: integrate drm_crtc.c kerneldoc
And do a quick pass to adjust them to the last few (years?) of changes
...

This time actually compile-tested ;-)

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 15:29:18 +01:00
Daniel Vetter 8faf6b18a2 drm: review locking rules in drm_crtc.c
- config_cleanup was confused: It claimed that callers need to hold
  the modeset lock, but the connector|encoder_cleanup helpers grabbed
  that themselves (note that crtc_cleanup did _not_ grab the modeset
  lock). Which resulted in all drivers _not_ hodling the lock. Since
  this is for single-threaded cleanup code, drop the requirement from
  docs and also drop the lock_grabbing from all _cleanup functions.

- Kill the LOCKING section in the doctype, since clearly we're not
  good enough to keep them up-to-date. And misleading locking
  documentation is worse than useless (see e.g. the comment in the
  vmgfx driver about the cleanup mess). And since for most functions
  the very first line either grabs the lock or has a WARN_ON(!locked)
  the documentation doesn't really add anything.

- Instead put in some effort into explaining the only two special
  cases a bit better: config_init and config_cleanup are both called
  from single-threaded setup/teardown code, so don't do any locking.
  It's the driver's job though to enforce this.

- Where lacking, add a WARN_ON(!is_locked). Not many places though,
  since locking around fbdev setup/teardown is through-roughly screwed
  up, and so will break almost every single WARN annotation I've tried
  to add.

- Add a drm_modeset_is_locked helper - the Grate Modset Locking Rework
  will use the compiler to assist in the big reorg by renaming the
  mode lock, so start encapsulating things. Unfortunately this ended
  up in the "wrong" header file since it needs the definition of
  struct drm_device.

v2: Drop most WARNS again - we hit them all over the place, mostly in
the setup and teardown sequences. And trying to fix it up leads to
nice deadlocks, since the locking in the setup code is really
inconsistent.

Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 15:29:04 +01:00
Rob Clark 5849556328 drm: remove legacy drm_connector_property fxns
Replace references to and remove the connector property fxns, which
have been superseded with the more general object property fxns:

  + drm_connector_attach_property -> drm_object_attach_property
  + drm_connector_property_set_value -> drm_object_property_set_value
  + drm_connector_property_get_value -> drm_object_property_get_value

Signed-off-by: Rob Clark <rob@ti.com>
2012-11-30 10:30:48 -06:00
Daniel Vetter 5e2cb2f6da drm: properly init/reset connector status
This can help drivers to make somewhat intelligent decisions in their
->detect callback: If the connector is hpd capable and in the unknown
state, the driver needs to force a full detect cycle. Otherwise it
could just (if it chooses so) to update the connector state from it's
hpd handler directly, and always return that in the ->detect callback.

Atm only drm/i915 calls drm_mode_config_reset at resume time, so other
drivers would need to add that call first before using this facility.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20 15:51:06 +10:00
Sachin Kamat e655d122a7 drm/crtc: Fix potential NULL pointer dereference
drm_property_create_blob() could return NULL in which case NULL pointer
dereference error (on connector->edid_blob_ptr) is possible. Return if
connector->edid_blob_ptr is NULL.

Fixes the following smatch error:
drivers/gpu/drm/drm_crtc.c:3186 drm_mode_connector_update_edid_property()
error: potential null dereference 'connector->edid_blob_ptr'.
(drm_property_create_blob returns null)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20 15:40:51 +10:00
Sachin Kamat 9e1c156ff0 drm/crtc: Remove redundant NULL check before kfree
kfree() on a NULL input is a no-op. Hence remove the check.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20 15:40:46 +10:00
Ville Syrjälä e3cc3520dc drm: Reject addfb2 with undefined flag bits set
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20 15:37:41 +10:00
Ville Syrjälä c4a56750ec drm: Ignore blob propertys in drm_property_change_is_valid()
In case of a blob property drm_property_change_is_valid() can't
tell whether the change is valid or not. So just return true
for all blob properties, and leave it up to someone else to
check it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07 10:14:24 +10:00
Ville Syrjälä b180b5d1c7 drm: Be more paranoid with integer overflows
Make sure 'width * cpp' and 'height * pitch + offset' don't exceed
UINT_MAX.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07 10:09:09 +10:00
Linus Torvalds 612a9aab56 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm merge (part 1) from Dave Airlie:
 "So first of all my tree and uapi stuff has a conflict mess, its my
  fault as the nouveau stuff didn't hit -next as were trying to rebase
  regressions out of it before we merged.

  Highlights:
   - SH mobile modesetting driver and associated helpers
   - some DRM core documentation
   - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
     combined pte writing, ilk rc6 support,
   - nouveau: major driver rework into a hw core driver, makes features
     like SLI a lot saner to implement,
   - psb: add eDP/DP support for Cedarview
   - radeon: 2 layer page tables, async VM pte updates, better PLL
     selection for > 2 screens, better ACPI interactions

  The rest is general grab bag of fixes.

  So why part 1? well I have the exynos pull req which came in a bit
  late but was waiting for me to do something they shouldn't have and it
  looks fairly safe, and David Howells has some more header cleanups
  he'd like me to pull, that seem like a good idea, but I'd like to get
  this merge out of the way so -next dosen't get blocked."

Tons of conflicts mostly due to silly include line changes, but mostly
mindless.  A few other small semantic conflicts too, noted from Dave's
pre-merged branch.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...
2012-10-03 23:29:23 -07:00
David Howells 760285e7e7 UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
Convert #include "..." to #include <path/...> in drivers/gpu/.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:07 +01:00
David Howells 4126d5d61f UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
Remove redundant DRM UAPI header #inclusions from drivers/gpu/.

Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h).  They are now #included via drmP.h and drm_crtc.h via a preceding
patch.

Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..."  work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:05 +01:00
Rob Clark 7c80e12842 drm: support for rotated scanout
For drivers that can support rotated scanout, the extra parameter
checking in drm-core, while nice, tends to get confused.  To solve
this drivers can set the crtc or plane invert_dimensions field so
that the dimension checking takes into account the rotation that
the driver is performing.

v1: original
v2: remove invert_dimensions from plane, at Ville's suggestion.
    Userspace can give rotated src coordinates, so invert_dimensions
    is not required for planes.

Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-02 22:16:07 +10:00
Rob Clark f7eff60ea0 drm: refcnt drm_framebuffer (v4.1)
This simplifies drm fb lifetime, and if the crtc/plane needs to hold
a ref to the fb when disabling a pipe until the next vblank, this
avoids the need to make disabling an overlay synchronous.  This is a
problem that shows up when userspace is using a drm plane to
implement a hw cursor.. making overlay disable synchronous causes
a performance problem when x11 is rapidly enabling/disabling the
hw cursor.  But not making it synchronous opens up a race condition
for crashing if userspace turns around and immediately deletes the
fb.  Refcnt'ing the fb makes it possible to solve this problem.

v1: original
v2: add drm_framebuffer_remove() which is called in all paths where
    fb->funcs->destroy() was directly called before.  This cleans
    up the CRTCs/planes that the fb was attached to.  You should
    only directly use drm_framebuffer_unreference() if you are also
    using drm_framebuffer_reference() to keep a ref to the fb.
v3: add comment explaining the fb refcount
v4: remove duplicate 'list_del(&fb->filp_head)'

[airlied: v4.1: fix local rejection]

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-02 22:15:39 +10:00
Chris Wilson 3184009c36 drm: Destroy the planes prior to destroying the associated CRTC
As during the plane cleanup, we wish to disable the hardware and
so may modify state on the associated CRTC, that CRTC must continue to
exist until we are finished.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54101
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-02 09:29:37 +10:00
Daniel Vetter 398b7a1b88 Linux 3.6-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQX7MuAAoJEHm+PkMAQRiG0h0IAJURkrMCAQUxA+Ik66ReH89s
 LQcVd0U9uL4UUOi7f5WR64Vf9Cfu6VVGX9ZKSvjpNskvlQaUQPMIt4pMe6g4X4dI
 u0bApEy4XZz3nGabUAghIU8jJ8cDmhCG6kPpSiS7pi7KHc0yIa4WFtJRrIpGaIWT
 xuK38YOiOHcSDRlLyWZzainMncQp/ixJdxnqVMTonkVLk0q0b84XzOr4/qlLE5lU
 i+TsK3PRKdQXgvZ4CebL+srPBwWX1dmgP3VkeBloQbSSenSeELICbFWavn2ml+sF
 GXi4dO93oNquL/Oy5SwI666T4uNcrRPaS+5X+xSZgBW/y2aQVJVJuNZg6ZP/uWk=
 =0v2l
 -----END PGP SIGNATURE-----

Merge tag 'v3.6-rc7' into drm-intel-next-queued

Manual backmerge of -rc7 to resolve a silent conflict leading to
compile failure in drivers/gpu/drm/i915/intel_hdmi.c.

This is due to the bugfix in -rc7:

commit b98b601672
Author: Wang Xingchao <xingchao.wang@intel.com>
Date:   Thu Sep 13 07:43:22 2012 +0800

    drm/i915: HDMI - Clear Audio Enable bit for Hot Plug

Since this code moved around a lot in -next git put that snippet at
the wrong spot. I've tried to fix this by making the conflict explicit
by merging a version for next with:

commit 3cce574f01
Author: Wang Xingchao <xingchao.wang@intel.com>
Date:   Thu Sep 13 11:19:00 2012 +0800

    drm/i915: HDMI - Clear Audio Enable bit for Hot Plug unconditionally

But that failed to solve the entire problem. To avoid pushing out
further -nightly branch to our QA where this is broken, do the
backmerge and manually add the stuff git adds to -next from the patch
in -fixes.

Note that this doesn't show up in git's merge diff (and hence is also
not handled by git rerere), which adds to the reasons why I'd like to
fix this with a verbose backmerge. The git merge diff only shows a
bunch of trivial conflicts of the "code changed in lines next to each
another" kind.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-24 18:17:12 +02:00
Laurent Pinchart ba623f6a5a drm: Add NV24 and NV42 pixel formats
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-09-18 12:28:21 +02:00
Jakob Bornecrantz 7c4eaca416 drm: Check for invalid cursor flags
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-24 09:38:40 +10:00
Ville Syrjälä 592c20ee45 drm: Use stdint types for consistency
The rest of the code uses stdint types, so use them in
drm_property_change_is_valid() as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29 11:07:09 +01:00
Ville Syrjälä cff91b625f drm: Constify params to format_check() and framebuffer_checks()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-29 11:06:58 +01:00
Rob Clark 4d93914ae3 drm: add plane properties
The omapdrm driver uses this for setting per-overlay rotation.  It
is likely also useful for setting YUV->RGB colorspace conversion
matrix, etc.

Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22 10:54:30 +01:00
Rob Clark 49e2754578 drm: add bitmask property type
A bitmask property is similar to an enum.  The enum value is a bit
position (0-63), and valid property values consist of a mask of
zero or more of (1 << enum_val[n]).

[airlied: 1LL -> 1ULL]

Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22 10:54:16 +01:00
Laurent Pinchart ebe0f2442c drm: Make the CRTC gamma_set operation optional
Drivers for hardware without gamma support should not be forced to
implement a no-op gamma set operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22 10:35:15 +01:00
Laurent Pinchart 3b02ab8893 drm: Miscellaneous typo fixes and documentation updates
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22 10:34:33 +01:00
Laurent Pinchart 4a1b071427 drm: Don't initialize local ret variable when not needed
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22 10:32:58 +01:00
Paulo Zanoni bffd9de029 drm: add CRTC properties
The i915 driver needs this for the rotation and overscan compensation
properties. Other drivers might need this too.

Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:46 +01:00
Paulo Zanoni 7f88a9bedf drm: add 'count' to struct drm_object_properties
This way, we don't need to count every time, so we're a little bit
faster and code is a little bit smaller.

Change suggested by Ville Syrjälä.

Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:38 +01:00
Paulo Zanoni 0057d8dd8d drm: make the connector properties code use the object properties code
In the future, we may want to kill the internal functions:
- drm_connector_attach_property
- drm_connector_property_set_value
- drm_connector_property_get_value

It seems the IOCTL drm_mode_connector_property_set_ioctl will have to live, but
we may change libdrm to not use it anymore, if we want.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:28 +01:00
Paulo Zanoni c543188afb drm: add generic ioctls to get/set properties on any object
Useless for connector properties (since they already have their own
ioctls), but useful when we add properties to CRTCs, planes and other
objects.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:22 +01:00
Paulo Zanoni 7e3bdf4a6d drm: create struct drm_object_properties and use it
For now, only connectors have it. In the future, all objects that need
properties should use it. Since the structure is referenced inside
struct drm_mode_object, we will be able to deal with object properties
without knowing the real type of the object.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:13 +01:00
Paulo Zanoni afea2ad53f drm: WARN() when drm_connector_attach_property fails
Also return void instead of int. We have more than 100 callers and
no one checks for the return value.

If this function fails the property won't be exposed by the get/set
ioctls, but we should probably survive. If this starts happening,
the solution will be to increase DRM_CONNECTOR_MAX_PROPERTY and
recompile the Kernel.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:11:06 +01:00
Paulo Zanoni 26a3481586 drm: add drm_property_change_is_valid
Move code from drm_mode_connector_property_set_ioctl to a new
function, so we can reuse this code when we add crtc properties.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17 11:10:55 +01:00
Dave Airlie 4f256e8aa3 Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next
Daniel prepared this branch with a back-merge as git was getting
very confused about changes in intel_display.c
2012-05-07 16:09:35 +01:00