Add memcpy in edma. The edma has the capability to transfer data by
software trigger so that it could be used for memory copy. Enable
MEMCPY for edma driver and it could be test directly by dmatest.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://lore.kernel.org/r/20211026090025.2777292-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix following panic on system halt:
Requesting system halt
[ 10.600000] spi spi0.1: spi_device 0.1 cleanup
[ 10.630000] fsl_edma_chan_mux() fsl_chan->edma->n_chans 64 dmamux_nr 0
[ 10.630000] *** ZERO DIVIDE *** FORMAT=4
[ 10.630000] Current process id is 38
[ 10.630000] BAD KERNEL TRAP: 00000000
[ 10.630000] PC: [<402f09ba>] fsl_edma_chan_mux+0x7c/0x12e
...
Some architecture as mcf5441x (ColdFire) may not have
a dmamux, so dmamux_nr is set to 0. This patch considers this case.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210901211610.662077-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to recent fixes in m68k arch-specific I/O accessor macros, this
driver is not working anymore for ColdFire. Fix wrong tcd endianness
removing additional swaps, since edma_writex() functions should already
take care of any eventual swap if needed.
Note, i could only test the change in ColdFire mcf54415 and Vybrid
vf50 / Colibri where i don't see any issue. So, every feedback and
test for all other SoCs involved is really appreciated.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add lockdep assert for an exported function expected to be called under
spin lock. Since this function is called in different modules, the
lockdep assert will be self-documenting note about need for locking.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591877861-28156-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The alignment of mux_configure32() and fsl_edma_chan_mux() need
to be adjusted, it must start precisely at the first column after
the openning parenthesis of the first line.
Fixes: 9d831528a6 ("dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior intended)")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20190814072105.144107-3-maowenan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is one sparse warning in drivers/dma/fsl-edma-common.c:
drivers/dma/fsl-edma-common.c:93:6: warning: symbol 'mux_configure32'
was not declared. Should it be static?
Fix it by setting mux_configure32() as static.
Fixes: 232a7f18cf ("dmaengine: fsl-edma: add i.mx7ulp edma2 version support")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20190814072105.144107-2-maowenan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add edma2 for i.mx7ulp by version v3, since v2 has already
been used by mcf-edma.
The big changes based on v1 are belows:
1. only one dmamux.
2. another clock dma_clk except dmamux clk.
3. 16 independent interrupts instead of only one interrupt for
all channels.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1563952834-7731-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 7144afd025 ("dmaengine: fsl-edma: add i.mx7ulp
edma2 version support") as this fails to build with module option due to
usage of of_irq_count() which is not an exported symbol as kernel
drivers are *not* expected to use it (rightly so).
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add edma2 for i.mx7ulp by version v3, since v2 has already
been used by mcf-edma.
The big changes based on v1 are belows:
1. only one dmamux.
2. another clock dma_clk except dmamux clk.
3. 16 independent interrupts instead of only one interrupt for
all channels.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The next v3 i.mx7ulp edma is based on v1, so change version
check logic for v2 instead.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Prepare for edmav2 on i.mx7ulp whose dmamux register is 32bit. No function
impacted.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are some differences between vf610 and next i.mx7ulp. Put such
differences into static driver data for distinguishing easily at
driver level. Change mcf-edma accordingly.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 002905eca5.
Commit 002905eca5 ("dmaengine: fsl-edma: support little endian for edma
driver") incorrectly assumed that there was not little endian support
in the driver.
This causes hangs on Vybrid, so revert it so that Vybrid systems
could boot again.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This mapping needs to be created in order for slave dma transfers
to work on systems with SMMU. The implementation mostly mimics the
one in pl330 dma driver, authored by Robin Murphy.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds support for ColdFire mcf5441x-family edma
module.
The ColdFire edma module is slightly different from fsl-edma,
so a new driver is added. But most of the code is common
between fsl-edma and mcf-edma so it has been collected into a
separate common module fsl-edma-common (patch 1/3).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds configurable registers (using __iomem addresses)
to allow the use of fsl-edma-common code with slightly different
edma module versions, as Vybrid (v1) and ColdFire (v2) are.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds a new fsl-edma-common module to allow new
mcf-edma module code to use most of the fsl-edma code.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Joy Zou