On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.
Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Before:
$ perf stat ~/hackbench 5
error: syscall returned with -1 (No such device)
After:
$ perf stat ~/hackbench 5
Time: 1.640
Performance counter stats for '/home/mingo/hackbench 5':
6524.570382 task-clock-ticks # 3.838 CPU utilization factor
35704 context-switches # 0.005 M/sec
191 CPU-migrations # 0.000 M/sec
8958 page-faults # 0.001 M/sec
<not counted> cycles
<not counted> instructions
<not counted> cache-references
<not counted> cache-misses
Wall-clock time elapsed: 1699.999995 msecs
Also add -v (--verbose) option to allow the printing of failed
counter opens.
Plus dont print 'inf' if wall-time is zero (due to jiffies granularity),
instead skip the printing of the CPU utilization factor.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.
Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.
Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.
Hence this simple solution which partially covers the default
case.
[ Impact: fix display artifacts in perf top ]
Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan noticed this bug in the perf annotate help output:
-s, --symbol <file> symbol to annotate
that should be <symbol> instead.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
the "perf report" utility crashed in some circumstances
because the "sym" stack variable was not initialized before used
(as also proven by valgrind).
With this fix both the crash goes away and valgrind no longer complains.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Right now kernel debug info does not get resolved by default, because
we dont know where to look for the vmlinux.
The -k option can be used for that - but if no option is given, pick
up vmlinux files in the current directory - in case a kernel hacker
runs profiling from the source directory that the kernel was built in.
The real solution would be to embedd the location (and perhaps the
date/timestamp) of the vmlinux file in /proc/kallsyms, so that
tools can pick it up automatically.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
gcc warned about this bug:
util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar