This Kselftest update for Linux 6.2-rc1 consists of several fixes
and enhancements to existing tests and a few new tests:
- adds new amd-pstate and fixes and enhances existing ones
- adds new watchdog tests and enhances existing ones to improve coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes
-----BEGIN PGP SIGNATURE-----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=4cDX
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes and enhancements to existing tests and a few new tests:
- add new amd-pstate tests and fix and enhance existing ones
- add new watchdog tests and enhance existing ones to improve
coverage
- fixes to ftrace, splice_read, rtc, and efivars tests
- fixes to handle egrep obsolescence in the latest grep release
- miscellaneous spelling and SPDX fixes"
* tag 'linux-kselftest-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (24 commits)
selftests/ftrace: Use long for synthetic event probe test
selftests/tpm2: Split async tests call to separate shell script runner
selftests: splice_read: Fix sysfs read cases
selftests: ftrace: Use "grep -E" instead of "egrep"
selftests: gpio: Use "grep -E" instead of "egrep"
selftests: kselftest_deps: Use "grep -E" instead of "egrep"
selftests/efivarfs: Add checking of the test return value
cpufreq: amd-pstate: fix spdxcheck warnings for amd-pstate-ut.c
selftests: rtc: skip when RTC is not present
selftests/ftrace: event_triggers: wait longer for test_event_enable
selftests/vDSO: Add riscv getcpu & gettimeofday test
Documentation: amd-pstate: Add tbench and gitsource test introduction
selftests: amd-pstate: Trigger gitsource benchmark and test cpus
selftests: amd-pstate: Trigger tbench benchmark and test cpus
selftests: amd-pstate: Split basic.sh into run.sh and basic.sh.
selftests: amd-pstate: Rename amd-pstate-ut.sh to basic.sh.
selftests/ftrace: Convert tracer tests to use 'requires' to specify program dependency
selftests/ftrace: Add check for ping command for trigger tests
selftests/watchdog: Fix spelling mistake "Temeprature" -> "Temperature"
selftests/watchdog: add test for WDIOC_GETTEMP
...
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stop trying to set boost MSRs on CPUs that don't support boost.
This corrects a bug in the recent patch "Defer setting boost MSRs".
Fixes: 13fdbc8b8d ("cpufreq: ACPI: Defer setting boost MSRs")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=8cze
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.2 from Viresh Kumar:
"- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET)."
* tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq
cpufreq: qcom-hw: Use cached dev pointer in probe()
cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe
cpufreq: qcom-hw: Remove un-necessary cpumask_empty() check
cpufreq: Generalize of_perf_domain_get_sharing_cpumask phandle format
Use flexible array to simplify memory allocation.
It saves some memory, avoids an indirection when reading the 'clusters'
array and removes some LoC.
Detailed explanation:
====================
Knowing that:
- each devm_ allocation over-allocates 40 bytes for internal needs
- Some rounding is done by the memory allocator on 8, 16, 32, 64, 96,
128, 192, 256, 512, 1024, 2048, 4096, 8192 boundaries
and that:
- sizeof(struct tegra186_cpufreq_data) = 24
- sizeof(struct tegra186_cpufreq_cluster) = 16
Memory allocations in tegra186_cpufreq_probe() are:
data: (24 + 40) = 64 => 64 bytes
data->clusters: (2 * 16 + 40) = 72 => 96 bytes
So a total of 160 bytes are allocated.
56 for the real need, 80 for internal uses and 24 are wasted.
If 'struct tegra186_cpufreq_data' is reordered so that 'clusters' is a
flexible array:
- it saves one pointer in the structure
- only one allocation is needed
So, only 96 bytes are allocated:
16 + 2 * 16 + 40 = 88 => 96 bytes
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
See also the following past commits:
commit d8de7a44e1 ("cpufreq: intel_pstate: Add Skylake servers support")
commit 706c532885 ("cpufreq: intel_pstate: Add Cometlake support in
no-HWP mode")
commit fbdc21e9b0 ("cpufreq: intel_pstate: Add Icelake servers support in
no-HWP mode")
commit 71bb5c82aa ("cpufreq: intel_pstate: Add Tigerlake support in
no-HWP mode")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:
BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
kobject_put+0x1be/0x4c0
cpufreq_online.cold+0xee/0x1fd
cpufreq_add_dev+0x183/0x1e0
subsys_interface_register+0x3f5/0x4e0
cpufreq_register_driver+0x3b7/0x670
acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
do_one_initcall+0x13d/0x780
do_init_module+0x1c3/0x630
load_module+0x6e67/0x73b0
__do_sys_finit_module+0x181/0x240
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver implements CPU frequency scaling for Apple Silicon SoCs,
including M1 (t8103), M1 Max/Pro/Ultra (t600x), and M2 (t8112).
Each CPU cluster has its own register set, and frequency management is
fully automated by the hardware; the driver only has to write one
register. There is boost frequency support, but the hardware will only
allow their use if only a subset of cores in a cluster are in
non-deep-idle. Since we don't support deep idle yet, these frequencies
are not achievable, but the driver supports them. They will remain
disabled in the device tree until deep idle is implemented, to avoid
confusing users.
This driver does not yet implement the memory controller performance
state tuning that usually accompanies higher CPU p-states. This will be
done in a future patch.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Qcom CPUFreq hardware (EPSS/OSM) controls clock and voltage to the CPU
cores. But this relationship is not represented with the clk framework
so far.
So, let's make the qcom-cpufreq-hw driver a clock provider. This makes the
clock producer/consumer relationship cleaner and is also useful for CPU
related frameworks like OPP to know the frequency at which the CPUs are
running.
The clock frequency provided by the driver is for each frequency domain.
We cannot get the frequency of each CPU core because, not all platforms
support per-core DCVS feature.
Also the frequency supplied by the driver is the actual frequency that
comes out of the EPSS/OSM block after the DCVS operation. This frequency is
not same as what the CPUFreq framework has set but it is the one that gets
supplied to the CPUs after throttling by LMh.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Xiu: Fixed memleak. ]
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq_driver->get() callback is supposed to return the current
frequency of the CPU and not the one requested by the CPUFreq core.
Fix it by returning the frequency that gets supplied to the CPU after
the DCVS operation of EPSS/OSM.
Fixes: 2849dd8bc7 ("cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Clang warns:
drivers/cpufreq/acpi-cpufreq.c:970:24: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized]
acpi_cpufreq_online = ret;
^~~
drivers/cpufreq/acpi-cpufreq.c:960:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
1 error generated.
Both ret and acpi_cpufreq_online are now unused so they can be safely
removed, clearing up the warning.
Fixes: 13fdbc8b8d ("cpufreq: ACPI: Defer setting boost MSRs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1757
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.
Fixes: 51c843cf77 ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make ti-cpufreq driver depend on ARCH_K3 and set it to `default y` so it
is always enabled for platforms that it depends on.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add ti,am625 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes so it is not
created twice.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for TI K3 AM625 SoC to read speed and revision values from
hardware and pass to OPP layer.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With the
"commit 3d13058ed2 ("cpufreq: intel_pstate: Use firmware default EPP")"
the firmware can set an EPP, which driver will not overwrite. But the
driver has a valid range check for:
0x40 > firmware epp < 0x80.
Hence firmware can't specify EPP of 0x80.
If the firmware didn't specify in the valid range, the driver has a
hard coded EPP of 102. But some Chrome hardware vendors don't want
this overwrite and wants to boot with chipset default EPP of 0x80 as
this improves battery life.
In this case they want to have capability to specify EPP of 0x80 via
the firmware. This require the valid range to include 0x80 also.
But here the valid range can't be simply extended to include 0x80 as
this is the chipset default EPP. Even without any firmware specifying
EPP, the chipset will always boot with EPP of 0x80.
To make sure that firmware specified EPP of 0x80 and not by the
chipset default, it will require additional check to make sure HWP
was enabled by the firmware before boot. Only way the firmware can
update EPP, is to enable HWP and update EPP via MSR_HWP_REQUEST.
This driver already checks, if the HWP is enabled by the firmware.
Use the same flag and extend valid range to include 0x80.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When acpi-cpufreq is loaded, boost is enabled on every CPU (by setting an
MSR) before the driver is registered with cpufreq. This can be very time
consuming, because it is done with a CPU hotplug startup callback, and
cpuhp_setup_state() schedules the callback (cpufreq_boost_online()) to run
on each CPU one at a time, waiting for each to run before calling the next.
If cpufreq_register_driver() fails--if, for example, there are no ACPI
P-states present--this is wasted time.
Since cpufreq already sets up a CPU hotplug startup callback if and when
acpi-cpufreq is registered, set the boost MSRs in acpi_cpufreq_cpu_init(),
which is called by the cpufreq cpuhp callback. This allows acpi-cpufreq to
exit quickly if it is loaded but not needed.
On one system with 192 CPUs, this patch speeds up boot by about 30 seconds.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Don't populate the read-only array sys_clk_src on the stack but instead
make it static and add in a missing const. Also makes the object code a
little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Don't populate the read-only array speeds on the stack but instead
make it static. Also makes the object code a little smaller. Replace
hard-coded loop array bounds with ARRAY_SIZE.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use str_enabled_disabled() helper instead of open coding the same.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
soc_data is a static info of the driver and thus no need to cache it inside
the qcom_cpufreq_data struct which is allocated per frequency domain. So,
move it inside qcom_cpufreq struct.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are multiple instances of dev pointer used in the probe() function.
Instead of referencing pdev->dev all the time, let's use a cached dev
pointer to simplify the code.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
qcom_cpufreq_data is allocated based on the number of frequency domains
defined in DT which is static and won't change during runtime. There is
no real reason to allocate it during the CPU init() callback and deallocate
it during exit(). Hence, move the allocation to probe() and use the
allocated memory during init().
This also allows us to use devm_platform_get_and_ioremap_resource() helper
for acquiring the freq-domain resources from DT.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
CPUFreq core will always set the "policy->cpus" bitmask with the bitfield
of the CPU that goes first per domain/policy. So there is no way the
"policy->cpus" bitmask will be empty during qcom_cpufreq_hw_cpu_init().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
of_perf_domain_get_sharing_cpumask currently assumes a 1-argument
phandle format, and directly returns the argument. Generalize this to
return the full of_phandle_args, so it can be used by drivers which use
other phandle styles (e.g. separate nodes). This also requires changing
the CPU sharing match to compare the full args structure.
Also, make sure to of_node_put(args.np) (the original code was leaking a
reference).
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.
However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.
This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27). For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.
Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.
This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.
For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date. For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the probe path, convert pr_err() to dev_err_probe() which will
check if error code is -EPROBE_DEFER and prints the error name.
It also sets the defer probe reason which can be checked later
through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The speedbin_nvmem parameter is not used for
get_krait_bin_format_{a,b}. Let's remove the parameter to make the code
cleaner.
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the Tegra194 CPUFREQ driver is built as a module it is not
automatically loaded as expected on Tegra194 devices. Populate the
MODULE_DEVICE_TABLE to fix this.
Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: df320f8935 ("cpufreq: Add Tegra194 cpufreq driver")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
This Kselftest update for Linux 6.1-rc1 consists of fixes and new tests.
- Adds a amd-pstate-ut test module, this module is used by kselftest
to unit test amd-pstate functionality
- Fixes and cleanups to to cpu-hotplug to delete the fault injection
test code
- Improvements to vm test to use top_srcdir for builds
-----BEGIN PGP SIGNATURE-----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=O0Lh
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes and new tests:
- Add an amd-pstate-ut test module, used by kselftest to unit test
amd-pstate functionality
- Fixes and cleanups to to cpu-hotplug to delete the fault injection
test code
- Improvements to vm test to use top_srcdir for builds"
* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs:kselftest: fix kselftest_module.h path of example module
cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
selftests/cpu-hotplug: Add log info when test success
selftests/cpu-hotplug: Reserve one cpu online at least
selftests/cpu-hotplug: Delete fault injection related code
selftests/cpu-hotplug: Use return instead of exit
selftests/cpu-hotplug: Correct log info
cpufreq: amd-pstate: modify type in argument 2 for filp_open
Documentation: amd-pstate: Add unit test introduction
selftests: amd-pstate: Add test trigger for amd-pstate driver
cpufreq: amd-pstate: Add test module for amd-pstate driver
cpufreq: amd-pstate: Expose struct amd_cpudata
selftests/vm: use top_srcdir instead of recomputing relative paths
This kernel module is used for testing. It's safe to say M here.
It can also be built-in without X86_AMD_PSTATE enabled.
Currently, only tests for amd-pstate are supported. If X86_AMD_PSTATE
is set disabled, it can tell the users test can only run on amd-pstate
driver, please set X86_AMD_PSTATE enabled.
In the future, comparison tests will be added. It can set amd-pstate
disabled and set acpi-cpufreq enabled to run test cases, then compare
the test results.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add amd-pstate-ut test module, this module is used by kselftest
to unit test amd-pstate functionality. This module will be
expected by some of selftests to be present and loaded.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Expose struct amd_cpudata to AMD P-State unit test module.
This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies).
- Update the AMD P-state driver (Perry Yuan):
* Fix wrong lowest perf fetch.
* Map desired perf into pstate scope for powersave governor.
* Update pstate frequency transition delay time.
* Fix initial highest_perf value.
* Clean up.
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba).
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang Jianhua).
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
- Handle -EPROBE_DEFER when regulator is not probed on
mtk-ci-devfreq.c (AngeloGioacchino Del Regno).
- Fix message typo and use dev_err_probe() in rockchip-dfi.c
(Christophe JAILLET).
-----BEGIN PGP SIGNATURE-----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=+3IL
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for some new hardware, extend the existing hardware
support, fix some issues and clean up code
Specifics:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies)
- Update the AMD P-state driver (Perry Yuan):
- Fix wrong lowest perf fetch
- Map desired perf into pstate scope for powersave governor
- Update pstate frequency transition delay time
- Fix initial highest_perf value
- Clean up
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba)
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski)
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye
xingchen, and Yang Yingliang)
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen
Yan, and Viresh Kumar)
- Minor cleanups around functions called at module_init() (Xiu
Jianfeng)
- Use module_init and add module_exit for bmips driver (Zhang
Jianhua)
- Add AlderLake-N support to intel_idle (Zhang Rui)
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang)
- Remove redundant check from cpuidle_switch_governor() (Yu Liao)
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang)
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang)
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki)
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello)
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang)
- Update the intel_rapl power capping driver:
- Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
- Add support for RAPTORLAKE_S (Zhang Rui).
- Fix UBSAN shift-out-of-bounds issue (Chao Qin)
- Handle -EPROBE_DEFER when regulator is not probed on
mtk-ci-devfreq.c (AngeloGioacchino Del Regno)
- Fix message typo and use dev_err_probe() in rockchip-dfi.c
(Christophe JAILLET)"
* tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
PM / devfreq: rockchip-dfi: Fix an error message
PM / devfreq: mtk-cci: Handle sram regulator probe deferral
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
intel_idle: Add AlderLake-N support
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
powercap: intel_rapl: Add support for RAPTORLAKE_S
cpufreq: amd-pstate: Fix initial highest_perf value
cpuidle: Remove redundant check in cpuidle_switch_governor()
PM: wakeup: Add extra debugging statement for multiple active IRQs
cpufreq: tegra194: Remove the unneeded result variable
PM: suspend: move from strlcpy() with unused retval to strscpy()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
...
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang Jianhua).
-----BEGIN PGP SIGNATURE-----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=iTZh
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/arm updates for 6.1-rc1 from Viresh Kumar:
"- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang
Jianhua)."
* tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: tegra194: Remove the unneeded result variable
cpufreq: bmips-cpufreq: Use module_init and add module_exit
cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
Linus Torvalds