err is being checked for failure each time it is being updated
so this err check is totally redundant and can be removed
Detected with CoverityScan, CID#1420665 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure we sure register any sensor when sony_input_configured failes.
Somehow this line got lost during resolving of merge conflicts in the
motion sensor patch series and a redudant remove was added as well later
on.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By default when using bluetooth the DS4 reports data at about 1kHz,
which is quite fast especially on weak devices. We now make the
device use the USB poll interval, which is a fixed 4ms. In addition
we make the value adjustable through sysfs.
The error handling in sony_input_configured is a little tricky. It
is not easy to add other goto's as not all codepaths have logic
for adding this attribute. Luckily we are setting the value for the
attribute to a default value, so we can use that to detect if we need
to remove the file.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Only set bit flags for the portions of the DS4 output report
for which we have data.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These colors are more the default colors normally used on the DS4.
The previous ones were faint and not so noticeable.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The navigation controller is a DS3 (sixaxis) with fewer physical
axes and buttons. It utilizes the same HID report as the DS3 and
thus reports axes/buttons which aren't physically present.
Currently many non-existing buttons and axes are reported, which
we are now removing.
For the axes/buttons which do exist, we make the axis/button mapping
similar to the DS3.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS3 MAC address is reported as a unique identified when
using Bluetooth. For USB there is no unique identifier reported
yet, so use the MAC address.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Game controllers can be connected twice through USB and BT. Only
one connection is allowed. Currently we perform a check for duplicate
controllers halfway through device initialization. To prevent
'transient' devices, we should do this check as early as we can.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds a separate evdev node for the DS3 its motion
sensors. We only expose the accelerometers as the gyroscope
is extremely difficult to manage and behavior varies a lot
between hardware revisions.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds printing when we failed to activate DS3 / Nagivation
controllers and checks the return value for these failures earlier
in sony_input_configured. This paves the way for other configuration
logic for these devices, which we don't want to call if for example
the activation failed.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The axis and button mapping for the DS3 is strange. This is mostly
due to the device reporting many axes as for every digital button
it also has an analog button. Due to amount of analog values it
is even leaking well into the MT axes range.
We felt it is best to remove the many analog buttons and just report
digital and comply to the Linux gamepad spec. The analog buttons are
rarely used on the official platform, let alone on Linux.
This patch does remove motion sensor support (added back in another
patch).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the DS4 touchpad device is neither classified as a direct
input device nor as a pointer device. It makes most sense to mark
it as a pointer device.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DualShock 4 dongle isn't connected to a real DualShock 4 at
time of driver loading. When a DualShock 4 is plugged in, we
need to obtain calibration data (the dongle would have zeros).
This patch adds calibration logic, which we schedule on a hotplug
from sony_raw_event. In addition this patch adds dongle state
handling.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver currently uses sony_schedule_work to submit output
reports for the different devices for LEDs or rumble.
This patch adds a new parameter to sony_schedule_work to allow
scheduling for other types of work. The next patch in this series
will utilize this functionality. Considering the driver structure
and all error handling it felt best to reuse sony_schedule_work
and sony_cancel_work. The idea was inspired by the wacom driver
which does something similar.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds a new quirk, which allows us to differentiate
between the DualShock 4 USB and the dongle. So far they have
been treated the same, but handling of calibration data differs
as the dongle behaves like Bluetooth, for other requests it
behaves like USB.
In addition this patches changes usb/dongle/bt handling in
sony_raw_event, which makes the code cleaner to read. In addition
another patch in this series will add more dongle logic, so this
change paves the road for that.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 in BT mode sends initial input reports through report 1, which
is described in the HID report descriptors. When activated after sending
a certain feature report, the device uses report 17.
Currently the hid-sony driver fixes up the BT HID report descriptors,
so the HID layer can manage input reports for report 17.
We think it is best to eliminate this fixup and do the handling ourselves,
which is what this patch does. The main motivation is that there are
various users of DS4 through hidraw, including various cross-platform
applications/games, which have their own HID parsing across Linux/Win/OSX.
Due to the fixup the descriptors differ, which is causing pain for many
developers including major game publishers (who reached out privately).
Without the fixup, the Windows titles also have a fighting chance for
working on Wine, which provides HID support now. Overall it felt
best because of these reasons to remove the fixup.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 motion sensors require calibration for accurate operation.
This patch adds calibration for both the accelerometer and the
gyroscope. Calibration requires reading device specific scaling
factors and offsets. For precision reasons we store these values
as a numerator and denominator and apply the values when processing
the data.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 motion sensors are currently mapped by the hid-core driver
to non-existing axes in between ABS_MISC and ABS_MT_SLOT, because
the device already exhausted ABS_X-ABS_RZ. For a part the mapping
by hid-core is accomplished by a fixup in hid-sony as the motion
axes actually use vendor specific usage pages.
This patch makes the DS4 use a separate input device for the motion
sensors and reports acceleration data through ABS_X-ABS_Z and
gyroscope data through ABS_RX-ABS_RZ. In addition it extends the
event spec to allow gyroscope data through ABS_RX-ABS_RZ when
INPUT_PROP_ACCELEROMETER is set. This change was suggested by
Peter Hutterer during a discussion on linux-input.
[jkosina@suse.cz: rebase onto slightly newer codebase]
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When a user connects a DS4 twice using USB and BT, we reject the
second device connection after the setup work. We then perform
a cleanup, but during cleanup we are not removing the touchpad
device. This leads to leakage of an input device, which we would
never remove. It can likely result into a kernel oops as well
when the touchpad evdev node is accessed and the underlaying HID
device has been removed from the system.
[jkosina@suse.cz: added stable annotation]
Fixes: ac797b95f5 ("HID: sony: Make the DS4 touchpad a separate device")
Cc: stable@vger.kernel.org
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The LED subsystem provides the LED_CORE_SUSPENDRESUME flag to handle
automatically turning off and restoring the state of device LEDs during
suspend/resume. Use this flag instead of saving and restoring the state
locally.
Signed-off-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the DS4 dongle is connected, it always generates HID reports
even when no DS4 is paired to it. This patch adds logic to ignore
HID reports from the dongle if there is no DS4 currently attached.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 MAC address is reported as a unique identified when
using Bluetooth. For USB there is no unique identifier reported
yet, so use the MAC address.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The error handling code in sony_input_configured in general uses goto
based cleanup. Recently we migrated code from sony_probe to here, but
we didn't update the existing touchpad registration code, which was
already here to use the goto.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for USB based DS4 dongle device, which allows connecting
a DS4 through Bluetooth, but hides Bluetooth from the host system.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The DS4 side of hid-sony used the hid-core layer to assign buttons
and axes based on the HID report descriptors. The default mapping
was strange e.g. right stick using ABS_Z/ABS_RZ or the physical
'south button' being reported as BTN_EAST etcetera.
This patch makes the DS4 side ofi the hid-sony driver comply to
the Linux game controller spec as suggested in a discussion with
Dmitry on the linux-input list.
Currently the main user of the DS4 is the SDL2 library, which has
a mapping table using vendor/device/version as a key. In order to
not break SDL2 we discussed adjusting the version number, so it
can have both mappings. This was discust on linux-input and we
discussed privately with SDL2 developers.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The dualshock 4 supports both analog sticks of which one uses
ABS_X/_Y and a touchpad. In a recent discussion with Dmitry about
some input-mt changes we proposed for disabling pointer emulation from
input_mt_sync_frame, Dmitry mentioned ABS_X/_Y should report the
same data as ABS_MT_POSITION_X/_Y. The current driver is mixing axes
for different subdevices. It was suggested to make the touchpad
its own sub-device.
This patch turns the touchpad into its own device. In addition
this patch also moves the button underneath the touchpad into
the new device. It felt like this button should be part of the
device. No known user space application (not even SDL2) seems to
be using it.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A previous patch moved most input initialization from sony_probe to
sony_input_configured to avoid some race conditions. The driver has some
special logic to prevent the device to get registered twice in case the
user connects it both over Bluetooth and USB. When this condition
happens sony_input_configured returns a failure, but sony_probe continues
as hid_hw_start doesn't fail. As was discussed on linux-input, it is
acceptable for this function to fail.
This patch adds a check for the HID_CLAIMED_INPUT flag within sony_probe
to determine whether initialization succeeded correctly. The flag is
not set by the HID layer when sony_input_configured fails.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The motion sensor values are 16-bit, so make the value range match.
It is hard to reach the upper values, but they can be reached. At
least the current accelerometer value of 8192 is very easy to pass.
It is still not nice that the motion sensors live in no man's land
in between ABS_MISC and ABS_MT_SLOT, but that's something for another
time, which the proposed ABS_ACCEL_*/ABS_GYRO_* were meant for.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Read the touch history field in the HID descriptor and use this value
to determine how many touch events to read from the report. As part
of this patch, we did a first attempt of making the offset calculation
code less magical.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a CRC value to each output report. This removes the need for the
'no output reports on interrupt end-point' quirk.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Put the report type (feature / output) in the report size definitions.
This prevents name collisions later on for other different reports, which use
the same report id, but have a different size.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Early on the sony_probe function calls hid_hw_start to start the hardware.
Afterwards it issues some hardware requests, initializes other functionality
like Force Feedback, power classes and others. However by the time
hid_hw_start returns, the device nodes have already been created, which leads
to a race condition by user space applications which may detect the device
prior to completion of initialization. We have observed this problem many
times, this patch fixes the problem.
This patch moves most of sony_probe to sony_input_configured, which is called
prior to device registration. This fixes the race condition and the same
approach is used in other HID drivers.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Update the copyright notice with the current year and add a note
about values for controlling the Dualshock 4 reporting rate.
Processing reports at the default full rate of 1000hz can be too
demanding for some low-power embedded processors so noting
alternate values for people working with this hardware can be useful.
Thanks to Rostislav Pehlivanov for finding these values.
Signed-off-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When initially connected via USB the Sixaxis isn't fully initialized
until the PS logo button is pressed and won't send any input reports
nor will any state set by output reports be retained.
This adds a 'defer_initialization' flag to the sony_sc struct which,
when set, will delay sending any output reports until the first input
report has arrived. This flag is used with the USB Sixaxis to ensure
that any state sent will persist since, until the PS button is pushed,
any changes sent to the controller via an output report will be lost
after a couple of seconds.
The initial state of the controller is still configured at the time
of the initial connection and won't be internally modified after that,
so any state set by the user between that time and the recepit of the
first input report won't be lost.
Signed-off-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some USB-only devices which masquerade as Sixaxis controllers report the
same generic Bluetooth address for all hardware when queried via the HID
report. This causes these devices to be wrongly rejected as duplicates
when more than one is connected at once.
This introduces a connection type comparison when checking for duplicates
and only rejects the newly connected device if the existing matching
device is connected using a different connection protocol.
The results of the connection type comparison are also used when
registering power supply info as the device Bluetooth address is used
as the unique identifier string. In cases where more than one valid
device has the same Bluetooth address the device ID is now appended
to the power supply name string to avoid name collisions when
registering the power supply information.
Signed-off-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The FutureMax Dance Mat claims to be a SixAxis controller
but breaks if descriptor fixups are applied. Detect the
device using its USB product string and disable fixups
when it is detected.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Double-underscore prefixed types are unnecessary in pure kernel code,
replace them with the non prefixed equivalents.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
WARNING: Block comments use a trailing */ on a separate line
#822: FILE: drivers/hid/hid-sony.c:822:
+ * number but it's not needed for correct operation */
WARNING: Block comments use a trailing */ on a separate line
#828: FILE: drivers/hid/hid-sony.c:828:
+ * buttons multiple keypresses are allowed */
WARNING: Block comments use a trailing */ on a separate line
#854: FILE: drivers/hid/hid-sony.c:854:
+ * 0xff and 11th is for press indication */
WARNING: Missing a blank line after declarations
#1930: FILE: drivers/hid/hid-sony.c:1930:
+ struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
+ sc->send_output_report(sc);
WARNING: Block comments use a trailing */ on a separate line
#2510: FILE: drivers/hid/hid-sony.c:2510:
+ * Logitech joystick from the device descriptor. */
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
./scripts/checkpatch.pl \
--types "SPACING,TRAILING_WHITESPACE,POINTER_LOCATION,CODE_INDENT" \
-f drivers/hid/hid-sony.c
ERROR: trailing whitespace
#933: FILE: drivers/hid/hid-sony.c:933:
+^I * $
ERROR: space prohibited after that open square bracket '['
#947: FILE: drivers/hid/hid-sony.c:947:
+ [ 1] = BTN_TRIGGER_HAPPY1,
ERROR: space prohibited after that open square bracket '['
#948: FILE: drivers/hid/hid-sony.c:948:
+ [ 2] = BTN_TRIGGER_HAPPY2,
ERROR: space prohibited after that open square bracket '['
#949: FILE: drivers/hid/hid-sony.c:949:
+ [ 3] = BTN_TRIGGER_HAPPY3,
ERROR: space prohibited after that open square bracket '['
#950: FILE: drivers/hid/hid-sony.c:950:
+ [ 4] = BTN_TRIGGER_HAPPY4,
ERROR: space prohibited after that open square bracket '['
#951: FILE: drivers/hid/hid-sony.c:951:
+ [ 5] = BTN_TRIGGER_HAPPY5,
ERROR: space prohibited after that open square bracket '['
#952: FILE: drivers/hid/hid-sony.c:952:
+ [ 6] = BTN_TRIGGER_HAPPY6,
ERROR: space prohibited after that open square bracket '['
#953: FILE: drivers/hid/hid-sony.c:953:
+ [ 7] = BTN_TRIGGER_HAPPY7,
ERROR: space prohibited after that open square bracket '['
#954: FILE: drivers/hid/hid-sony.c:954:
+ [ 8] = BTN_TRIGGER_HAPPY8,
ERROR: space prohibited after that open square bracket '['
#955: FILE: drivers/hid/hid-sony.c:955:
+ [ 9] = BTN_TRIGGER_HAPPY9,
ERROR: "(foo*)" should be "(foo *)"
#1032: FILE: drivers/hid/hid-sony.c:1032:
+ void(*send_output_report)(struct sony_sc*);
WARNING: missing space after return type
#1032: FILE: drivers/hid/hid-sony.c:1032:
+ void(*send_output_report)(struct sony_sc*);
ERROR: "(foo*)" should be "(foo *)"
#2261: FILE: drivers/hid/hid-sony.c:2261:
+ void(*send_output_report)(struct sony_sc*))
WARNING: missing space after return type
#2261: FILE: drivers/hid/hid-sony.c:2261:
+ void(*send_output_report)(struct sony_sc*))
ERROR: code indent should use tabs where possible
#2449: FILE: drivers/hid/hid-sony.c:2449:
+ */$
total: 13 errors, 2 warnings, 2570 lines checked
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Frank Praznik <frank.praznik@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The nyko core controller uses the same output report format as the
sixaxis controllers, but it expects the report id at offset 1.
This does not interfere with the official controllers as this byte
is considered a padding byte by the current code.
Signed-off-by: Scott Moreau <oreaus@gmail.com>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds rumble and LED support for nyko core controllers
using the sino lite chip vendor:1345 product:3008, for PS3.
Setting operational mode and output reports are the same as
sixaxis but the input report has a different format since the
PS3 accepts HID usb devices. For it to work, an exception is
needed to skip overriding the report descriptor and use the
original one.
Signed-off-by: Scott Moreau <oreaus@gmail.com>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When setting the operational mode, some third party (Speedlink Strike-FX)
gamepads refuse the output report. Failing here means we refuse to
initialize the gamepad while this should be harmless.
The weird part is that the initial commit that added this: a7de9b8
("HID: sony: Enable Gasia third-party PS3 controllers") mentions this
very same controller as one requiring this output report.
Anyway, it's broken for one user at least, so let's change it.
We will report an error, but at least the controller should work.
And no, these devices present themselves as legacy Sony controllers
(VID:PID of 054C:0268, as in the official ones) so there are no ways
of discriminating them from the official ones.
https://bugzilla.redhat.com/show_bug.cgi?id=1255325
Reported-and-tested-by: Max Fedotov <thesourcehim@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri Kosina