Driver that select DMA_OPS need to depend on HAS_DMA support to
work. The vop driver was missing that dependency, so add it, and also
add a another depends in DMA_OPS itself. That won't fix the issue due
to how the Kconfig dependencies work, but at least produce a warning
about unmet dependencies.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
The HiKey 970 board is similar to Hikey 960 with regards
to its USB configutation: it also relies on a USB HUB
that is used when DWC3 is at host mode.
However, it requires a few extra DT settings, as it
uses a voltage regulator and GPIO reset pin.
Add support for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/62843df9927b4d8dac5dc7c4a189567fa52ab2bb.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HiKey960 has a fairly complex USB configuration due to it
needing to support a USB-C port for host/device mode and multiple
USB-A ports in host mode, all using a single USB controller.
See schematics here:
https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
This driver acts as a usb-role-switch intermediary, intercepting
the role switch notifications from the tcpm code, and passing
them on to the dwc3 core.
In doing so, it also controls the onboard hub and power gpios in
order to properly route the data lines between the USB-C port
and the onboard hub to the USB-A ports.
Signed-off-by: Yu Chen <chenyu56@huawei.com>
[jstultz: Major rework to make the driver a usb-role-switch
intermediary]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c263f72e1d803c18c45a69ce2c333e79a7ed89ff.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- delay registration of the nvmem provider until after power is enabled
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl9XeiIACgkQEacuoBRx
13Lxww/7Bngrl7TCeLHvW0Gun6Dk8q4gGHi74MhXYdULuyNGi7MIRjthy8jCXafU
M+aOzxn8Y7kTXIPtfGvgnzPIgC/PHhm5meBalHWwPT26ihG+T2iAntCAbXLnARsZ
hT3TDhGw1Kx1flaIVrck+jAH6QhLxm0WuM381la7ddS45lNn6t61Hoxg7ZGeiSP+
bBaYDkRkfIsMu0bw9t+EQApnNyLMM52q3UjC9I1Uy9KfeIcxMqx8mVTUzqPgblFe
R4McdU025klNwpqUWfCNzJ57br8Pwy50VPH83l6TYLgm7YO90maTiD8w5xBKUNoQ
tPgbPhs1l/ZPPNCFNYf1679f6ELaOif8hW0/1VwWYXF13Lrcbu3fx8cUFr246FaK
XM+6SH/O9JGf/yNrtJ8j+oFCVZADLuvIriyEHBnkEihZx7bzYd1z7lJD1bEZSYqI
Nf5Unaji4nsduYaeRSLu6+XpIAMCmKsgYbEAo+0DT9e+rxsCc7QSMBhmnU2e+lEl
0IZLvX63BsyVqUUGXoXnRrEziPdMz4Rf34Y3oVwCKEMGN72bsJFI2lVP+/ywnkoV
PRKr/LKTENmbEJP4CD14fOZsGrrub6MrAqKOEPYL/06omEvUwlA/mJVsoeNIf/TG
foD8qiVb5roQYAvdQJ/wZtCwIAgcmbLApxLLe+RCQrxtibWTCLI=
=c7cP
-----END PGP SIGNATURE-----
Merge tag 'at24-fixes-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.9-rc5
- delay registration of the nvmem provider until after power is enabled
Once we can't manipulate the address limit, we also can't test what
happens when the manipulation is abused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add Renesas R8A774E1 in pci_device_id table so that pci-epf-test
can be used for testing PCIe EP on RZ/G2H.
Link: https://lore.kernel.org/r/20200904103851.3946-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add Renesas R8A774A1 and R8A774B1 in pci_device_id table so that
pci-epf-test can be used for testing PCIe EP on RZ/G2M and RZ/G2N.
Link: https://lore.kernel.org/r/20200814173037.17822-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
During nvmem_register() the nvmem core sends notifications when:
- cell added
- nvmem added
and during these notifications some callback func may access the nvmem
device, which will fail in case of at24 eeprom because regulator and pm
are enabled after nvmem_register().
Fixes: cd5676db05 ("misc: eeprom: at24: support pm_runtime control")
Fixes: b20eb4c1f0 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
All initiator coordinates received upon an 'MMU page fault RAZWI
event' should be the routers coordinates, the only exception is the
DMA initiators for which the reported coordinates correspond to
their actual location.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit fixes a potential debugfs issue that may occur when
reading the clock gating mask into the user buffer since the
user buffer size was not taken into consideration.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In a couple of places in qp_host_get_user_memory(),
get_user_pages_fast() is called without properly checking for errors. If
e.g. -EFAULT is returned, this negative value will then be passed on to
qp_release_pages(), which expects a u64 as input.
Fix this by only calling qp_release_pages() when we have a positive
number returned.
Fixes: 06164d2b72 ("VMCI: queue pairs implementation.")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20200825164522.412392-1-alex.dewar90@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200826063316.23486-29-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Storage technologies like FRAM have no "write pages", the whole chip can
be written within one SPI transfer. For these chips, the page size can
be set equal to the device size. Currently available devices are already
bigger than 64 kiB.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200727111218.26926-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small char and misc and other driver subsystem fixes for
5.9-rc3.
The majority of these are tiny habanalabs driver fixes, but also in here
are:
- speakup build fixes now that it is out of staging and got
exposed to more build systems all of a sudden
- mei driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX0Zmbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk7DwCg1v16Ow/27oZZN/z2Wu40vRo3pJIAoJqz2ay/
PsrcjZIO15cEarTy1kEq
=3RZb
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc and other driver subsystem fixes for
5.9-rc3.
The majority of these are tiny habanalabs driver fixes, but also in
here are:
- speakup build fixes now that it is out of staging and got exposed
to more build systems all of a sudden
- mei driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: correctly report inbound pci region cfg error
habanalabs: check correct vmalloc return code
habanalabs: validate FW file size
habanalabs: fix incorrect check on failed workqueue create
habanalabs: set max power according to card type
habanalabs: proper handling of alloc size in coresight
habanalabs: set clock gating according to mask
habanalabs: verify user input in cs_ioctl_signal_wait
habanalabs: Fix a loop in gaudi_extract_ecc_info()
habanalabs: Fix memory corruption in debugfs
habanalabs: validate packet id during CB parse
habanalabs: Validate user address before mapping
habanalabs: unmap PCI bars upon iATU failure
mei: hdcp: fix mei_hdcp_verify_mprime() input parameter
speakup: only build serialio when ISA is enabled
speakup: Fix wait_for_xmitr for ttyio case
The elegant code in at24_read() has the drawback that we now need
to make a copy of all parameters to pass them to the post-processing
callback function if there is one. Rewrite the loop in such a way that
the parameters are not modified, so saving them is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Improve the error message shown if a capi adapter is plugged on a
capi-incompatible slot directly under the PHB (no intermediate switch).
Fixes: 5632874311 ("cxl: Add support for POWER9 DD2")
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200407115601.25453-1-fbarrat@linux.ibm.com
Existing users of ocxl_link_irq_alloc() have been converted to obtain
the trigger page of an interrupt through xive directly, we therefore
have no need to return the trigger page when allocating an interrupt.
It also allows ocxl to use the xive native interface to allocate
interrupts, instead of its custom service.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-4-fbarrat@linux.ibm.com
We can access the trigger page through standard APIs so let's use it
and avoid saving it when allocating the interrupt. It will also allow
to simplify allocation in a later patch.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403153838.29224-3-fbarrat@linux.ibm.com
During inbound iATU configuration we can get errors while
configuring PCI registers, there is a certain scenario in which these
errors are not reflected and driver is loaded with wrong configuration.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The null check on a failed workqueue create is currently null checking
hdev->cq_wq rather than the pointer hdev->cq_wq[i] and so the test
will never be true on a failed workqueue create. Fix this by checking
hdev->cq_wq[i].
Addresses-Coverity: ("Dereference before null check")
Fixes: 5574cb2194 ("habanalabs: Assign each CQ with its own work queue")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
User input must be validated before using it to
access internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The condition was reversed. It should have been less than instead of
greater than. The result is that we never enter the loop.
Fixes: fcc6a4e606 ("habanalabs: Extract ECC information from FW")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This has to be a long instead of a u32 because we write a long value.
On 64 bit systems, this will cause memory corruption.
Fixes: c216477363 ("habanalabs: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In case the driver fails to configure the PCI controller iATU, it needs to
unmap the PCI bars before exiting so if the driver is removed, the bars
won't be left mapped.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The old _do_fork() helper is removed in favor of the new kernel_clone() helper.
The latter adheres to naming conventions for kernel internal syscall helpers.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Link: https://lore.kernel.org/r/20200819104655.436656-10-christian.brauner@ubuntu.com
This frontend driver implements MEI hw interface based on virtio
framework to let MEI driver work without changes under virtualization.
It requires a backend service in the ACRN device-model on the service
OS side to make it work. The backend service will emulate mei routing
and assign vtags for each mei vritio device.
The backend service is available in ACRN device-model at github.
For more information, please refer to https://projectacrn.org
The ACRN virtio sub device id for MEI is is 0x8602.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-14-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This IOCTL is used to associate the current file descriptor
with a FW Client (given by UUID), and virtual tag (vtag).
The IOCTL opens a communication channel between a host client
and a FW client on a tagged channel. From this point on,
every reader and write will communicate with the associated
FW client on the tagged channel. Upon close() the communication
is terminated.
The IOCTL argument is a struct with a union that contains
the input parameter and the output parameter for this IOCTL.
The input parameter is UUID of the FW Client, a vtag [0,255]
The output parameter is the properties of the FW client
Clients that do not support tagged connection
will respond with -EOPNOTSUPP
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-12-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list of clients is only visible via mei client bus.
Enabling vtag clients on the mei client bus allows user-space to
enumerate clients with vtag support by traversing the mei bus on sysfs.
This feature is required for ACRN device model service.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-11-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The zero vtag is required for the read flow to work also for
devices on the mei client bus.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-10-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since multiple file pointers (fp) can be associated
with a single host client, upon close() only objects
associated with the fp has to flushed from the tx queues.
The control queues should be flushed only when all
the connections are closed and the client is disconnected.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-9-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vtag map is a list of tuples of vtag and file pointer (struct
mei_cl_vtag) associated with a particular me host client.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-8-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to support vtags we need to access read completed
queue out of driver big lock.
Add a spin lock to protect rd_completed queue.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bump HBM version to 2.2 to indicate vtag support.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an extend header beyond existing 4 bytes of the mei message header.
The extension is of variable length, starting with meta header
that contains the number of headers and the overall size of
the extended headers excluding meta header itself followed by
TLV list of extended headers. Currently only supported extension is
the vtag. From the HW perspective the extended headers is already
part of the payload.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vtag support is on a client basis, meaning not every client
supports it. The vtag capability is communicated via the client properties
structure during client enumeration process.
Export the propertiy via sysfs.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vtag allows partitioning the mei messages into virtual groups/channels.
Vtags are supported for firmwares with HBM version 2.2 and newer
and only when a firmware confirms the support via capability handshake.
This change only define vtag restrictions in order to make
the series bisectable. Everything will be enabled when driver HBM
version is set to 2.2.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new capabilities command in HBM version 2.2 allows
performing capabilities handshake between the firmware
and the host driver. The driver requests a capability
by setting the appropriate bit in 24bit wide bitmask and
the fw responses with the bit set providing the requested
capability is supported.
Bump copyright year in affected files.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Special handling of the Sony VAIO EEPROMs is the last feature of the
legacy eeprom driver that the at24 driver does not support. Adding
this would let us deprecate and eventually remove the legacy eeprom
driver.
So add the option to specify a post-processing callback function that
is called after reading data from the EEPROM, before it is returned
to the user. The 24c02-vaio type is the first use case of that option:
the callback function will mask the sensitive data for non-root users
exactly as the legacy eeprom driver was doing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Bartosz: removed a stray newline]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
wired_cmd_repeater_auth_stream_req_in has a variable
length array at the end. we use struct_size() overflow
macro to determine the size for the allocation and sending
size.
This also fixes bug in case number of streams is > 0 in the original
submission. This bug was not triggered as the number of streams is
always one.
Fixes: c56967d674 (mei: hdcp: Replace one-element array with flexible-array member)
Fixes: 0a1af1b5c1 (misc/mei/hdcp: Verify M_prime)
Cc: <stable@vger.kernel.org> # v5.1+: c56967d674 (mei: hdcp: Replace one-element array with flexible-array member)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200818075406.2532605-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl8tOxATHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDQfEAClXHWf6hnxB84bEu39D51NkVotL1IG
BRWFvyix+xHuUkHIouBPAAMl6ngY5X6wkYd+Z+CY9zHNtdSDoVlJE30YXdMQA/dE
L/rYxR1884yGR/uU/3wusboO68ReXwcKQPmKOymUfh0zH7ujyJsSWLpXFK1YDC5d
2TVVTi0Q+P5ucMHDh0L+AHirIxZvtZSp43+J7xLtywsj+XAxJWCTGo5WCJbdgbCA
Qbv3aOkVyUa3EgsbdM/STPpv82ebqT+PHxeSIO4Jw6ZODtKRH0R5YsWCApuY9eZ+
ebY9RLmgv9ZAhJqB2fv9A5NDcMoGpZNmjM7HrWpXwULKQpkBGHCzJ9FcSdHVMOx8
nbVMFjt4uzLwV1w8lFYslQ2tNH/uH2o9BlryV1RLpiiKokDAJO/NOsWN9y0u/I4J
EmAM5DSX2LgVvvas96IlGK8KX4xkOkf8FLX/H5UDvvAfloH8J4CZXk/CWCab/nqY
KEHPnMmYvQZ1w9SzyZg9sO/1p6Bl1Gmm75Jv2F1lBiRW/42VcGBI/qLsJ4lC59Fc
KbwufYNYYG38wbxDLW1HAPJhRonxIcaZj3EEqk7aTiLZ55nNbu8e2k32CpNXTGqt
npOhzJHimcq7L6+878ZW+xpbZwogIEUdRSsmwb6aT8za3ShnYwSA2Q3LYxh9xyGH
j3GifvPq6Efp3Q==
=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
- Convert cadence to use standard "dma-ranges" DT property instead of its
own "cdns,no-bar-match-nbits" (Kishon Vijay Abraham I)
- Fix pm_runtime_put_sync() issues in cadence error paths (Kishon Vijay
Abraham I)
- Add PTR_ALIGN_DOWN macro (Kishon Vijay Abraham I)
- Convert cadence r/w accessors to only 32-bit accesses (Kishon Vijay
Abraham I)
- Add cadence support to start Link and check Link status (Kishon Vijay
Abraham I)
- Allow custom PCI ops for cadence-based drivers (Kishon Vijay Abraham I)
- Remove "mem" from cadence reg binding since it's not memory and it
overlaps the PCIe config and memory region (Kishon Vijay Abraham I)
- Add cadence ->cpu_addr_fixup() for platforms that require absolute
addresses in the ATU, not just offsets (Kishon Vijay Abraham I)
- Update cadence Vendor IDs using local management registers, not
architected config space (Kishon Vijay Abraham I)
- Add cadence endpoint driver MSI-X support (Kishon Vijay Abraham I)
- Add bindings and driver for TI J721E SoC, supporting both host and
endpoint mode (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/cadence:
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
PCI: cadence: Add MSI-X support to Endpoint driver
PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
PCI: cadence: Add new *ops* for CPU addr fixup
dt-bindings: PCI: cadence: Remove "mem" from reg binding
PCI: cadence: Allow pci_host_bridge to have custom pci_ops
PCI: cadence: Add support to start link and verify link status
PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses
linux/kernel.h: Add PTR_ALIGN_DOWN macro
PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl8oGscLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYNfEhAAmFwd6BBHGwAhXUchoIue5vdNnuY3GiBFRzUdz67W
zRYYgZYiPjl+MwflRmwPcoWEnGzmweRa2s6OnyDostiCRauioa8BuQfGqJasf1yZ
D36dFNVHGW0o6pRDUQkd688k/4A6szwuwpq83qi4e8X2I9QzAITHtW8izjfPM923
FlJzxEFggbB2TvwfUXOZhmpuG4Dog8S7VZ1Uz4QAg0Z/5FDqIKAAG2aZMqCXBbiX
01E8tr0AqU/jn2xpc8O+DJGFiYIRhqhyNxQbH6qz1Q3xGFSokcLYm3YqkqVOgpn1
DLs2UFDxWkly/F+wGnYtju7OD9VGPywzOcW125/LIsApYN5R/rYrtQzK41eq7Mp5
HY3tqgNTIMdnl4so7QXeU4Vxj+lUdPlI26NZGszcM5AVftdTX8KjGdS+0+PBza6i
i7trwG7J5/DnwiBCvEKoul7Ul1psUMTSvYwINTXRqsU4mZXhhx/mwyXbtruELnkj
3agM98u6hoalLNjd2aueh+NjMZi1r+MchTrfRvTcxJ+yQ5BoR5kF+iz7eT/LtZ72
AqWwimsPGNkLHUa0TrqWql5tv90cdDkBZzWXVbixwxRfgynWYLE6jugeIy8hwjFf
GjO5XKbBwnWPjdSzFsVMPeuNpmr7ZjVHHewy2Q/jWQAIOyeof0VztEl23LN5yUkx
pc8=
=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
Add J721E in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in J721E.
Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Gcc report warning as follows:
drivers/misc/habanalabs/common/command_submission.c:373:6: warning:
variable 'ctx_asid' set but not used [-Wunused-but-set-variable]
373 | int ctx_asid, rc;
| ^~~~~~~~
This variable is not used in function cs_timedout(), this commit
remove it to fix the warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200729155902.33976-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the mei device heads are not generic and have
a specific purpose, we need to announce it to the user space
so it is possible to detect the correct device node via
matching attributes.
Generic heads are marked as 'mei' while special purpose heads
have their own names. Currently we are adding 'itouch' string
for Intel IPTS 1.0, 2.0 devices.
This is done via new sysfs attribute 'kind'.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200728192242.3117779-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses warnings and errors from the kernel doc scripts for
the OpenCAPI driver.
It also makes minor tweaks to make the docs more consistent.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200415012343.919255-3-alastair@d-silva.org
There's no need to try to be cute with the include file locations in the
Makefile, so just specify exactly where the files are.
Bonus is this fixes the problem of building with O= as well as trying to
just build the subdirectory alone.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Ben Segal <bpsegal20@gmail.com>
Cc: Christine Gharzuzi <cgharzuzi@habana.ai>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Link: https://lore.kernel.org/r/20200728171851.55842-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having sync_core() in processor.h is problematic since it is not possible
to check for hardware capabilities via the *cpu_has() family of macros.
The latter needs the definitions in processor.h.
It also looks more intuitive to relocate the function to sync_core.h.
This changeset does not make changes in functionality.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200727043132.15082-3-ricardo.neri-calderon@linux.intel.com
Add a missing free of the cs_pending array in the error flow of context
initialization.
Fixes: c16d45f42b ("habanalabs: Use pending CS amount per ASIC")
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
gaudi_mmu_invalidate_cache() doesn't use the flags parameter, and thus
it can be set to 0 when the function is called in the gaudi only files.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Device is now enabled before the hw_init() because part of the
initialization requires communication with the device firmware to get
information that is required for the initialization itself
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Create a device MMU-mapped internal command buffer pool, in order to allow
the driver to allocate CBs for the signal/wait operations
that are fetched by the queues when they are configured with the user's
address space ID.
We must pre-map this internal pool due to performance issues.
This pool is needed for future ASIC support and it is currently unused in
GOYA and GAUDI.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update the boot interface file from the latest version from firmware.
Defines for secure boot were added.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
For internal needs of our CI we need to move all the common code into a
common folder instead of putting them in the root folder of the driver.
Same applies to the common header files under include/
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
In GAUDI we use QMAN0 DMA for clearing the MMU memory region
at initialization. if this operation fails it places the DMA in an error
state and then when trying to initialize QMAN0 we fail and erroneously
assume its the QMAN that failed.
This commit adds a check and clear of such DMA errors at initialization so
we will have a better understanding of what went wrong.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In order for the user to be aware of wrong inputs, we must return
error in case the amount of jobs per cs exceeds the corresponding
queue size.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We identified a possible race during job completion when working
with a single multi-threaded work queue. In order to overcome this
race we suggest using a single threaded work queue per completion
queue, hence we guarantee jobs completion in order.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently the driver halts the device CPU in the halt engines function,
which halts all the engines of the ASIC. The problem is that if later on we
stop the reset process (due to inability to clean memory mappings in time),
the CPU will remain in halt mode. This creates many issues, such as
thermal/power control and FLR handling.
Therefore, move the halting of the device CPU to the very end of the reset
process, just before writing to the registers to initiate the reset. In
addition, the driver now needs to send a message to the device F/W to
disable it from sending interrupts to the host machine because during halt
engines function the driver disables the MSI/MSI-X interrupts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Remove an old hash that is not in use anymore.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Instead of using the free slots amount on the compute CQ to determine
whether we can submit work to queues, use the queues pi/ci.
This is needed in future ASICs where we don't have CQ per queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently the amount of maximum queues is statically configured.
Using a static value is causing redundunt cycles when traversing
all queues and consumes more memory than actually needed.
In this patch we configure each asic with the exact number of
queues needed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Soft-reset isn't supported in GAUDI. Remove the code that performs it and
print error in case the user wants to do it via sysfs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Divide iATU initialization into inbound/outbound methods.
We must separate it in order to enable different match mode
per PCIe region.
In addition, added support for PCI address match mode.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ECC (Error Correcting Code) interrupts are going to be handled
by the FW. Hence, we define an interface in which the driver can
obtain the relevant ECC information.
This information is needed for monitoring and can also lead
to a hard reset if ECC error is not correctable.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add command submission statistics structure which can be obtained
through the info ioctl. Each drop counter describes the reason for
which the command submission was dropped.
This information is needed for the user to be aware of the specific
reason for which the submitted work was dropped. The user can then
utilize the driver more efficiently.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Extract detection of the cpu boot status to a function
to allow code reuse
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
rephrase some error/warning/notice messages to make them more accessible to
ordinary users.
There is no need to print context ASID as the driver currently doesn't
support multiple contexts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
After recent concurrent cs amount increase, we must also
increase queues depth since much more concurrent work can be done.
All external queue depths were increased to 4096 as gaudi's
internal queue depths were also increased to 1024.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Rephrase F/W error message to make it more understandable to ordinary
users.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The profiler needs to know the PLL values for correctly showing the
profiling data. Because our firmware can use different PLL configurations,
we need to read the PLL values from the ASIC to pass them to the profiler.
Signed-off-by: Adam Aharon <aaharon@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Once there is a 64-bit field in a structure, GCC compiler for ARM aligns
the structure to 8 bytes. In order to avoid confusion when these
structures are being passed between CPUs from different architectures, we
explicitly align the structure to 8 bytes.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently sync stream is limited only for external queues. We want to
remove this constraint by adding a new queue property dedicated for sync
stream. In addition we move the initialization and reset methods to the
common code since we can re-use them with slight changes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Training schemes requires much more concurrent command submissions than
inference does. In addition, training command submissions can be completed
in a non serialized manner. Hence, we add support in which each ASIC will
be able to configure the amount of concurrent pending command submissions,
rather than use a predefined amount. This change will enhance performance
by allowing the user to add more concurrent work without waiting for the
previous work to be completed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We no longer need to initialize the rate limiters in GAUDI A1.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Replace the single element arrays with a simple value type u8 reserved,
even thought is is not used for dynamically sized trailing elements
it confuses the effort of replacing one-element arrays with
flexible arrays for that purpose.
Link: https://github.com/KSPP/linux/issues/79
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sizeof(*dev) + sizeof(*hw) instead of
sizeof(struct mei_device) + sizeof(struct mei_me_hw)
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sizeof(connect_data))) instead of
sizeof(struct mei_connect_client_data) when copying data
between user space and kernel.
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3c3b7ddef7, as it
turns out Tomas made a better series of patches for this same issue.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One-element arrays are being deprecated[1]. Replace the one-element
arrays with a simple value type u8 reserved, once this is just a
placeholder for alignment.
Also, while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the variable type is changed
but the corresponding sizeof that is passed as argument is not.
[1] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
Also, make use of the array_size() helper instead of the open-coded
version in memcpy(). These sorts of multiplication factors need to
be wrapped in array_size().
And while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the pointer variable type is
changed but the corresponding sizeof that is passed as argument is not.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722181534.GA31357@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When reading registers defined by the PCIe spec, use the names already
defined by the PCI core. This makes maintenance of the PCI core and
drivers easier. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org
[ additional replacements due to changes in my tree - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of hard-coding the location of the L1 PM Substates capability based
on the Device ID, search for it in the extended capabilities list. This
works for any device, as long as it implements the L1 PM Substates
capability correctly, so it doesn't require maintenance as new devices are
added. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org
[ minor addition due to differences in my tree - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_pci_read_config_dword() and similar wrappers around the PCI config
accessors add very little value, and they obscure the fact that often we
are accessing standard PCI registers that should be coordinated with the
PCI core.
Remove the wrappers and use the PCI config accessors directly. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org
[ fixed up some other instances as original patch was based on old tree - gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the driver-specific rtsx_pci_write_config_byte() to update
the PCIe Link Control Register, use pcie_capability_write_word() like the
rest of the kernel does. This makes it easier to maintain ASPM across the
PCI core and drivers.
No functional change intended. I missed this when doing 3d1e7aa80d
("misc: rtsx: Use pcie_capability_clear_and_set_word() for
PCI_EXP_LNKCTL").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Queue index is received from the user. Therefore, we must validate it
before using it to access the queue props array.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713175506.36676-1-grandmaster@al2klimov.de
Some opencapi FPGA images allow to control if the FPGA should be reloaded
on the next adapter reset. If it is supported, the image specifies it
through a Vendor Specific DVSEC in the config space of function 0.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com
In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
There scope should be limited within arch/x86.
Change all PCIBIOS_SUCCESSFUL to 0
Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
Link: https://lore.kernel.org/r/20200713122247.10985-14-refactormyself@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We see that sometimes the CPU in GOYA and GAUDI is occupied by the
power/thermal loop and can't answer requests from the driver fast enough.
Therefore, to avoid false notifications on timeouts, increase the timeout
to 4 seconds on each message sent to the device CPU.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock gating debugfs interface to be bitmask instead of true/false.
Each bit represents a different engine, according to gaudi_engine_id enum.
See debugfs documentation for more details.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
WREG_BULK is a special packet that has a variable length. Therefore, we
can't parse it when validating CBs that go to the PCI DMA queue. In case
the user needs to use it, it can put multiple WREG32 packets instead.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
In order to support new chip rts5228, the definitions of some internal
registers and workflow have to be modified.
Added rts5228.c rts5228.h for independent functions of the new chip rts5228
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vop_dc_to_vdev dropped an __iomem tag on its argument,
causing a sparse warning. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20200710113447.427927-1-mst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keeping the pointer increment though.
Fixes the following W=1 kernel build warning:
drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
178 | __be32 *data, drc_index, phandle;
| ^~~~~~~~~
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200709065651.GY3500@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... as is the case when !CONFIG_ACPI.
Fixes the following W=1 kernel build warning:
drivers/misc/eeprom/at24.c:228:36: warning: ‘at24_acpi_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200701093616.GX1179328@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix NULL pointer error if removing uacce's parent module during app's
running. SIGBUS is already reported by do_page_fault, so uacce_vma_fault
is not needed. If providing vma_fault, vmf->page has to be filled as well,
required by __do_fault.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1592229357-1904-1-git-send-email-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Formatting is correct and descriptions are all present, but some
of the argument names are not properly represented in the
documentation.
Fixes the following W=1 build warnings:
drivers/misc/ibmvmc.c:780: warning: Function parameter or member 'msg_len' not described in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:780: warning: Excess function parameter 'msg_length' description in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:1041: warning: Function parameter or member 'buffer' not described in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1041: warning: Excess function parameter 'buf' description in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1360: warning: Function parameter or member 'file' not described in 'ibmvmc_ioctl'
drivers/misc/ibmvmc.c:1360: warning: Excess function parameter 'session' description in 'ibmvmc_ioctl'
Cc: Steven Royer <seroyer@linux.ibm.com>
Cc: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Cc: Dave Engebretsen <engebret@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A nice attempt was made to provide kerneldoc headers for
read_template_version() and read_afu_lpc_memory_info() however,
the provided formatting does not match what is expected by
kerneldoc.
Fixes the following W=1 warnings:
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'dev' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'fn' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'len' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'version' not described in 'read_template_version'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'dev' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'fn' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'afu' not described in 'read_afu_lpc_memory_info'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function headers will need a lot of work before they reach the
standards expected of kerneldoc. Demote them down to basic
comments/headers, for now at least.
Fixes the following W=1 kernel build warnings:
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'unit_address' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'process_token' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'op' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p1' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p2' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p3' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p4' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'out' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:245: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_afu'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'unit_address' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'process_token' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'unit_address' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'process_token' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'unit_address' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'state' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'offset' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'len' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'cr_num' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'offset' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'len' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'unit_address' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'process_token' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'record' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'reg' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'unit_address' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'value' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'value' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'process_token' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'info' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'process_token' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'control_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'reset_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'op' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p1' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p2' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p3' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p4' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'out' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:516: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'op' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'num' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'out' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'num' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'out' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'unit_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'list_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'num' not described in 'cxl_h_validate_adapter_image'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, for some reason documentation of all 'scifdev' arguments
are missing, so apply those. Also remove 2 descriptions of 'ep'
which appear to document non-existent function arguments.
drivers/misc/mic/scif/scif_rma.c:468: warning: Function parameter or member 'scifdev' not described in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:468: warning: Excess function parameter 'ep' description in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:510: warning: Excess function parameter 'ep' description in 'scif_destroy_remote_window'
drivers/misc/mic/scif/scif_rma.c:1045: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_req'
drivers/misc/mic/scif/scif_rma.c:1080: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_gnt_rej'
drivers/misc/mic/scif/scif_rma.c:1104: warning: Function parameter or member 'scifdev' not described in 'scif_free_virt'
drivers/misc/mic/scif/scif_rma.c:1142: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg'
drivers/misc/mic/scif/scif_rma.c:1178: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg'
drivers/misc/mic/scif/scif_rma.c:1243: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_ack'
drivers/misc/mic/scif/scif_rma.c:1262: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_nack'
drivers/misc/mic/scif/scif_rma.c:1280: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_ack'
drivers/misc/mic/scif/scif_rma.c:1299: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_nack'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly add missing descriptions for every use of 'scifdev', then
correct incorrect formatting of existing function argument descriptions
changing to the expected format of '@.*: ', finally add missing
description for function argument 'mark'.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_fence.c:19: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark'
drivers/misc/mic/scif/scif_fence.c:41: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark_resp'
drivers/misc/mic/scif/scif_fence.c:64: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait'
drivers/misc/mic/scif/scif_fence.c:101: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait_resp'
drivers/misc/mic/scif/scif_fence.c:122: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_local'
drivers/misc/mic/scif/scif_fence.c:143: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_remote'
drivers/misc/mic/scif/scif_fence.c:164: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_resp'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'epd' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'roff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'rval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'loff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'lval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'flags' not described in 'scif_send_fence_signal'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly demote scif_rma_destroy_tcw()'s header to a standard
comment as no attempt has been made to document any of the
function arguments. Secondly, provide missing description
for 'prot' for scif_register_temp().
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'mmn' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'start' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'len' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:344: warning: Function parameter or member 'prot' not described in 'scif_register_temp'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing descriptions for function args, the promotion
of obvious kerneldoc headers and the mis-formatting of existing
argument descriptions.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_nm.c:19: warning: Function parameter or member 'node' not described in 'scif_invalidate_ep'
drivers/misc/mic/scif/scif_nm.c:173: warning: Function parameter or member 'node_id' not described in 'scif_disconnect_node'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing function argument documentation, misnamed argument
tags, the promotion of obvious kerneldoc header candidates and an
ordering issue (functions must follow the kerneldoc which describes
them).
Fixes the following W=1 kernel build issues:
drivers/misc/mic/scif/scif_nodeqp.c:452: warning: Function parameter or member 'scifdev' not described in 'scif_node_connect'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Function parameter or member 'unused' not described in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Excess function parameter 'msg' description in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Function parameter or member 'unused' not described in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Excess function parameter 'msg' description in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:939: warning: Function parameter or member 'scifdev' not described in 'scif_node_add_nack'
drivers/misc/mic/scif/scif_nodeqp.c:988: warning: Function parameter or member 'scifdev' not described in 'scif_get_node_info_resp'
drivers/misc/mic/scif/scif_nodeqp.c:1070: warning: cannot understand function prototype: 'int scif_max_msg_id = SCIF_MAX_MSG; '
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Function parameter or member 'unused' not described in 'scif_loopb_wq_handler'
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Excess function parameter 'work' description in 'scif_loopb_wq_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason (copy 'n' paste error?) the passed in pointers to
'struct scif_dev scifdev' weren't described throughout the source
file. Change that.
Fixes the following W=1 kernel build warning(s):
drivers/misc/mic/scif/scif_epd.c:120: warning: Function parameter or member 'scifdev' not described in 'scif_cnctreq'
drivers/misc/mic/scif/scif_epd.c:166: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt'
drivers/misc/mic/scif/scif_epd.c:191: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_ack'
drivers/misc/mic/scif/scif_epd.c:213: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_nack'
drivers/misc/mic/scif/scif_epd.c:230: warning: Function parameter or member 'scifdev' not described in 'scif_cnctrej'
drivers/misc/mic/scif/scif_epd.c:255: warning: Function parameter or member 'scifdev' not described in 'scif_discnct'
drivers/misc/mic/scif/scif_epd.c:309: warning: Function parameter or member 'scifdev' not described in 'scif_discnt_ack'
drivers/misc/mic/scif/scif_epd.c:325: warning: Function parameter or member 'scifdev' not described in 'scif_clientsend'
drivers/misc/mic/scif/scif_epd.c:341: warning: Function parameter or member 'scifdev' not described in 'scif_clientrcvd'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'epd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'peer' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'newepd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'flags' not described in 'scif_accept'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'read_size' appears to have been assigned, but never used since the
SCIF messaging and node enumeration APIs were introduced in 2015.
Makes sense to simply remove it.
Fixes the following W=1 warning:
drivers/misc/mic/scif/scif_api.c: In function ‘_scif_recv’:
drivers/misc/mic/scif/scif_api.c:1000:6: warning: variable ‘read_size’ set but not used [-Wunused-but-set-variable]
1000 | int read_size;
| ^~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 's' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 'unused' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 's' not described in 'force_reset_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 'pos' not described in 'force_reset_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__scif_get_port() has never taken 'port' as an argument since
its inception back in 2015. Probably document the proper arguments
expected 'start' and 'end'.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'start' not described in '__scif_get_port
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'end' not described in '__scif_get_port'
drivers/misc/mic/scif/scif_ports.c:36: warning: Excess function parameter 'port' description in '__scif_get_port'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning:
drivers/misc/mic/cosm/cosm_main.c:31: warning: Function parameter or member 'force' not described in 'cosm_hw_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_debugfs.c:108: warning: Function parameter or member 'mdev' not described in 'mic_create_debug_dir'
drivers/misc/mic/host/mic_debugfs.c:131: warning: Function parameter or member 'mdev' not described in 'mic_delete_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 's' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 'unused' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:53: warning: Function parameter or member 'mdrv' not described in 'mic_create_card_debug_dir'
drivers/misc/mic/card/mic_debugfs.c:67: warning: Function parameter or member 'mdrv' not described in 'mic_delete_card_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_x100.c:127: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_sbox_intr'
drivers/misc/mic/host/mic_x100.c:148: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_rdmasr_intr'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'dma_addr' not described in 'mic_x100_smpt_set'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'index' not described in 'mic_x100_smpt_set'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mic_interrupt() and mic_setup_msix() have incomplete documentation.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'irq' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'dev' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:188: warning: Function parameter or member 'pdev' not described in 'mic_setup_msix'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message_size' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:55: warning: Function parameter or member 'sp' not described in 'ibmasm_send_driver_vpd'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'sp' not described in 'ibmasm_send_os_state'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'os_state' not described in 'ibmasm_send_os_state'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig