The error message should say "hsync" instead of "vsync" as
we have just checked the "fsl,hsync-pin" property.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no need for doing an extra 'or' operation when reading
the return value from of_property_read_u32().
Just do a simple read instead.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
regulator_set_voltage() may fail, so we better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The internal bus configuration is imx-drm specific crtc state. Store it
in imx_crtc_state and let the encoder atomic_check callbacks determine
bus_flags, bus_format and the sync pins, possibly taking into account
the mode and the connector display info.
The custom imx_drm_encoder structure can be replaced again with
drm_encoder.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Now that we can use atomic configurations, all the legacy callbacks
of CRTCs, encoders and connectors can be switched to the atomic version.
For the imx-ldb driver, there is a clock parent setting mismatch bewteen
->enable and ->disable after the switch, so a fixup is added. For the
imx-tve driver, since the encoder's callback ->dpms is replaced by
->disable, we need to move the setting for the IPU_CLK_EN bit(in register
TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the
relevant CRTC cannot be disabled correctly with a warning on DC stop timeout.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The main task of imx encoders' ->prepare callbacks is to set bus_format,
bus_flags, di_vsync_pin and di_hsync_pin. We may create a structure named
imx_encoder to cache them. The atomic encoder callback ->disable may
replace ->prepare later, so let's remove ->prepare.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Wire up CRTCs', planes' and connectors' ->reset, ->duplicate and ->destroy state
hooks to use the default implementations from the atomic helper library.
The helpers track each DRM object state.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch allows panels to set pixel clock and data enable pin polarity
other than the default of driving data at the falling pixel clock edge
and active high display enable.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
)
{ ... }
@@
identifier dev, encoder, funcs;
@@
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type
+ ,const char *name, int DOTDOTDOT
);
@@
expression E1, E2, E3, E4;
@@
drm_encoder_init(E1, E2, E3, E4
+ ,NULL
)
v2: Add ', or NULL...' to @name kernel doc (Jani)
Annotate the function with __printf() attribute (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Commit a7c6e76fee ("drm/imx: switch to use media bus formats") accidentally
replaced IPU_PIX_FMT_GBR24 with MEDIA_BUS_FMT_YUV8_1X24 instead of the correct
MEDIA_BUS_FMT_GBR888_1X24. This patch is needed to fix VGA output in i.MX53.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
- Corrected handling of wait_for_completion_timeout return value
when disabling IPUv3 DC channels
- Fixed error return value propagation in TVE mode_set
- Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tRBf
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm fixes for IPUv3 DC and i.MX5 IPUv3 IC and TVE
- Corrected handling of wait_for_completion_timeout return value
when disabling IPUv3 DC channels
- Fixed error return value propagation in TVE mode_set
- Fixed IPUv3 register offsets for IC module on i.MX51 and i.MX53
* tag 'imx-drm-fixes-2015-01-28' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: Fix IC control register offset
drm: imx: imx-tve: Check and propagate the errors
gpu: ipu-v3: wait_for_completion_timeout does not return negative status
In the case of errors we should propagate them.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The encoder ->prepare() and ->mode_set() methods need to use the
hw adjusted mode, not the original mode.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Here's the big staging tree pull request for 3.19-rc1.
We continued to delete more lines than were added, always a good thing,
but not at a huge rate this release, only about 70k lines removed
overall mostly from removing the horrid bcm driver.
Lots of normal staging driver cleanups and fixes all over the place,
well over a thousand of them, the shortlog shows all the horrid details.
The "contentious" thing here is the movement of the Android binder code
out of staging into the "real" part of the kernel. This is code that
has been stable for a few years now and is working as-is in the tens of
millions of devices with no issues. Yes, the code is horrid, and the
userspace api leaves a lot to be desired, but it's not going to change
due to legacy issues that we have no control over. Because so many
devices and companies rely on this, and the code is stable, might as
well promote it out of staging.
This was all discussed at the Linux Plumbers conference, and everyone
participating agreed that this was the best way forward.
There is work happening to replace the binder code with something new
that is happening right now, but I don't expect to see the results of
that work for another year at the earliest. If that ever happens, and
Android switches over to it, I'll gladly remove this version.
As for maintainers, I'll be glad to maintain this code, I've been doing
it for the past few years with no problems. I'll send a MAINTAINERS
entry for it before 3.19-final is out, still need to talk to the Google
developers about if they are willing to help with it or not, last I
checked they were, which was good.
All of these patches have been in linux-next for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSPICkACgkQMUfUDdst+yksdwCfSLE9VUy1o2sAPDRe+J3bQced
EWEAoL3RtnejKbo5tHS2IT69pLrwiIDS
=YXyM
-----END PGP SIGNATURE-----
Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big staging tree pull request for 3.19-rc1.
We continued to delete more lines than were added, always a good
thing, but not at a huge rate this release, only about 70k lines
removed overall mostly from removing the horrid bcm driver.
Lots of normal staging driver cleanups and fixes all over the place,
well over a thousand of them, the shortlog shows all the horrid
details.
The "contentious" thing here is the movement of the Android binder
code out of staging into the "real" part of the kernel. This is code
that has been stable for a few years now and is working as-is in the
tens of millions of devices with no issues. Yes, the code is horrid,
and the userspace api leaves a lot to be desired, but it's not going
to change due to legacy issues that we have no control over. Because
so many devices and companies rely on this, and the code is stable,
might as well promote it out of staging.
This was all discussed at the Linux Plumbers conference, and everyone
participating agreed that this was the best way forward.
There is work happening to replace the binder code with something new
that is happening right now, but I don't expect to see the results of
that work for another year at the earliest. If that ever happens, and
Android switches over to it, I'll gladly remove this version.
As for maintainers, I'll be glad to maintain this code, I've been
doing it for the past few years with no problems. I'll send a
MAINTAINERS entry for it before 3.19-final is out, still need to talk
to the Google developers about if they are willing to help with it or
not, last I checked they were, which was good.
All of these patches have been in linux-next for a while with no
reported issues"
* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
Staging: slicoss: Fix long line issues in slicoss.c
staging: rtl8712: remove unnecessary else after return
staging: comedi: change some printk calls to pr_err
staging: rtl8723au: hal: Removed the extra semicolon
lustre: Deletion of unnecessary checks before three function calls
staging: lustre: fix sparse warnings: static function declaration
staging: lustre: fixed sparse warnings related to static declarations
staging: unisys: remove duplicate header
staging: unisys: remove unneeded structure
staging: ft1000 : replace __attribute ((__packed__) with __packed
drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
Drivers:staging:rtl8192e: Fixed checkpatch warning
Drivers:staging:clocking-wizard: Added a newline
staging: clocking-wizard: check for a valid clk_name pointer
staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
...
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fabio Estevam