Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().
Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.
To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.
Link: https://lore.kernel.org/linux-trace-kernel/20230330025223.1046087-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <ast@kernel.org>
Cc: <daniel@iogearbox.net>
Fixes: 8a141dd7f7 ("ftrace: Fix modify_ftrace_direct.")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The kernel command line ftrace_boot_snapshot by itself is supposed to
trigger a snapshot at the end of boot up of the main top level trace
buffer. A ftrace_boot_snapshot=foo will do the same for an instance called
foo that was created by trace_instance=foo,...
The logic was broken where if ftrace_boot_snapshot was by itself, it would
trigger a snapshot for all instances that had tracing enabled, regardless
if it asked for a snapshot or not.
When a snapshot is requested for a buffer, the buffer's
tr->allocated_snapshot is set to true. Use that to know if a trace buffer
wants a snapshot at boot up or not.
Since the top level buffer is part of the ftrace_trace_arrays list,
there's no reason to treat it differently than the other buffers. Just
iterate the list if ftrace_boot_snapshot was specified.
Link: https://lkml.kernel.org/r/20230405022341.895334039@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Fixes: 9c1c251d67 ("tracing: Allow boot instances to have snapshot buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If a trace instance has a failure with its snapshot code, the error
message is to be written to that instance's buffer. But currently, the
message is written to the top level buffer. Worse yet, it may also disable
the top level buffer and not the instance that had the issue.
Link: https://lkml.kernel.org/r/20230405022341.688730321@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Fixes: 2824f50332 ("tracing: Make the snapshot trigger work with instances")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
osnoise/timerlat tracers are reporting new max latency on instances
where the tracing is off, creating inconsistencies between the max
reported values in the trace and in the tracing_max_latency. Thus
only report new tracing_max_latency on active tracing instances.
Link: https://lkml.kernel.org/r/ecd109fde4a0c24ab0f00ba1e9a144ac19a91322.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
timerlat is not reporting a new tracing_max_latency for the thread
latency. The reason is that it is not calling notify_new_max_latency()
function after the new thread latency is sampled.
Call notify_new_max_latency() after computing the thread latency.
Link: https://lkml.kernel.org/r/16e18d61d69073d0192ace07bf61e405cca96e9c.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.
Call trace:
rb_get_reader_page+0x248/0x1300
rb_buffer_peek+0x34/0x160
ring_buffer_peek+0xbc/0x224
peek_next_entry+0x98/0xbc
__find_next_entry+0xc4/0x1c0
trace_find_next_entry_inc+0x30/0x94
tracing_read_pipe+0x198/0x304
vfs_read+0xb4/0x1e0
ksys_read+0x74/0x100
__arm64_sys_read+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
tail_page == commit_page == reader_page == {
.write = 0x100d20,
.read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!!
.entries = 0x10004c,
.real_end = 0x0,
.page = {
.time_stamp = 0x857257416af0,
.commit = 0xd20, // This page hasn't been full filled.
// .data[0...0xd20] seems normal.
}
}
The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.
To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.
Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 77ae365eca ("ring-buffer: make lockless")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, the "last_cmd" variable can be accessed by multiple processes
asynchronously when multiple users manipulate synthetic_events node
at the same time, it could lead to use-after-free or double-free.
This patch add "lastcmd_mutex" to prevent "last_cmd" from being accessed
asynchronously.
================================================================
It's easy to reproduce in the KASAN environment by running the two
scripts below in different shells.
script 1:
while :
do
echo -n -e '\x88' > /sys/kernel/tracing/synthetic_events
done
script 2:
while :
do
echo -n -e '\xb0' > /sys/kernel/tracing/synthetic_events
done
================================================================
double-free scenario:
process A process B
------------------- ---------------
1.kstrdup last_cmd
2.free last_cmd
3.free last_cmd(double-free)
================================================================
use-after-free scenario:
process A process B
------------------- ---------------
1.kstrdup last_cmd
2.free last_cmd
3.tracing_log_err(use-after-free)
================================================================
Appendix 1. KASAN report double-free:
BUG: KASAN: double-free in kfree+0xdc/0x1d4
Free of addr ***** by task sh/4879
Call trace:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x60/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Allocated by task 4879:
...
kstrdup+0x5c/0x98
create_or_delete_synth_event+0x6c/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Freed by task 5464:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x60/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
================================================================
Appendix 2. KASAN report use-after-free:
BUG: KASAN: use-after-free in strlen+0x5c/0x7c
Read of size 1 at addr ***** by task sh/5483
sh: CPU: 7 PID: 5483 Comm: sh
...
__asan_report_load1_noabort+0x34/0x44
strlen+0x5c/0x7c
tracing_log_err+0x60/0x444
create_or_delete_synth_event+0xc4/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Allocated by task 5483:
...
kstrdup+0x5c/0x98
create_or_delete_synth_event+0x80/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Freed by task 5480:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x74/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Link: https://lore.kernel.org/linux-trace-kernel/20230321110444.1587-1-Tze-nan.Wu@mediatek.com
Fixes: 27c888da98 ("tracing: Remove size restriction on synthetic event cmd error logging")
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: "Tom Zanussi" <zanussi@kernel.org>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead.
- Fix per cpu thread management of the hwlat tracer
* Do not start per_cpu threads if one is already running for the CPU.
* When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to
the result of the call from kprobe_event_delete(), which would
likely succeed, and thus have the function return success.
- Fix splice() reads from the trace file that was broken by
36e2c7421f ("fs: don't allow splice read/write without explicit ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags
for tricks to optimize, which was shortly removed due to them
being tricks. But a comment for those tricks remained.
- Set local functions and variables to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO
1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc=
=Yk66
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Do not allow histogram values to have modifies.
Can cause a NULL pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL.
Prevent the NULL pointer dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBDuTBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsboAP4yfrFYvIIKM5EkzkEiPI+V2hdlA12x
bt839jO5AWCmhAEAiY8FmKatpBJQKsiGqSOab8aHOMnhGFZwltCHAPa9PAI=
=vtA2
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
KASAN reported follow problem:
BUG: KASAN: use-after-free in lookup_rec
Read of size 8 at addr ffff000199270ff0 by task modprobe
CPU: 2 Comm: modprobe
Call trace:
kasan_report
__asan_load8
lookup_rec
ftrace_location
arch_check_ftrace_location
check_kprobe_address_safe
register_kprobe
When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.
Don't check the ip when pg->index is 0.
Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com
Cc: stable@vger.kernel.org
Fixes: 9644302e33 ("ftrace: Speed up search by skipping pages by address")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function hist_field_name() cannot handle being passed a NULL field
parameter. It should never be NULL, but due to a previous bug, NULL was
passed to the function and the kernel crashed due to a NULL dereference.
Mark Rutland reported this to me on IRC.
The bug was fixed, but to prevent future bugs from crashing the kernel,
check the field and add a WARN_ON() if it is NULL.
Link: https://lkml.kernel.org/r/20230302020810.762384440@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: c6afad49d1 ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=ezrg
-----END PGP SIGNATURE-----
Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Don't access released socket during error recovery (Akinobu
Mita)
- Bring back auto-removal of deleted namespaces during sequential
scan (Christoph Hellwig)
- Fix an error code in nvme_auth_process_dhchap_challenge (Dan
Carpenter)
- Show well known discovery name (Daniel Wagner)
- Add a missing endianess conversion in effects masking (Keith
Busch)
- Fix for a regression introduced in blk-rq-qos during init in this
merge window (Breno)
- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
holes and shrinking it (Christophe)
- Remove redundant bdev_get_queue() NULL checks (Juhyung)
- Add sed-opal single user mode support flag (Luca)
- Remove SQE128 check in ublk as it isn't needed, saving some memory
(Ming)
- Op specific segment checking for cloned requests (Uday)
- Exclusive open partition scan fixes (Yu)
- Loop offset/size checking before assigning them in the device (Zhong)
- Bio polling fixes (me)
* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
blk-iocost: Pass gendisk to ioc_refresh_params
nvme: fix sparse warning on effects masking
block: be a bit more careful in checking for NULL bdev while polling
block: clear bio->bi_bdev when putting a bio back in the cache
loop: loop_set_status_from_info() check before assignment
ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
block: remove more NULL checks after bdev_get_queue()
blk-mq: Reorder fields in 'struct blk_mq_tag_set'
block: fix scan partition for exclusively open device again
block: Revert "block: Do not reread partition table on exclusively open device"
sed-opal: add support flag for SUM in status ioctl
These are the probe events cleanup patches, no new features but improve
readability.
- Rename print_probe_args() to trace_probe_print_args() and un-inlined.
- Introduce a set of default data fetch functions for dynamic probe
events.
- Extract common code of data fetch process of dynamic probe events.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP40igbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b1Q4IAIdX/xWscmgnH/OjKlXK
U/O/mzvgY4m8pGpxbTHQ0DLea6PW2SUmGuPz+9BvRMisNtJP3M/C3vpnYEZRwkY9
Movn0lCBZ47Dw2pdwBz34XKUI+B3Tp42/Xs5J8FaKlp+/CcJNqGpsJnF0Hm05MUb
fZyQNI2hArnXITLHP+ADNiG6lTly0Zaza5nw27P+VW+6sfJhzuSG4hl+WXgHL8ut
M0s6972QYH08uGs7Ywnl8pMpng6861YpHnREoOLOJ+1Cg6IYA+O6XK3Q75EXp+IX
lXl611AAKZKpvc27eX+e9ionJRS4j1C0C12HSHYX/B8DN7SzuctXm1zmKewonHd5
r8M=
=1Lix
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes cleanup updates from Masami Hiramatsu:
"These are probe events cleanups, no new features but improve
readability:
- Rename print_probe_args() to trace_probe_print_args() and
un-inline it
- Introduce a set of default data fetch functions for dynamic
probe events
- Extract common code of data fetch process of dynamic probe events"
* tag 'probes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kernel/trace: extract common part in process_fetch_insn
kernel/trace: Provide default impelentations defined in trace_probe_tmpl.h
kernel/trace: Introduce trace_probe_print_args and use it in *probes
Pull alpha updates from Al Viro:
"Mostly small janitorial fixes but there's also more important ones: a
patch to fix loading large modules from Edward Humes, and some fixes
from Al Viro"
[ The fixes from Al mostly came in separately through Al's trees too and
are now duplicated.. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: in_irq() cleanup
alpha: lazy FPU switching
alpha/boot/misc: trim unused declarations
alpha/boot/tools/objstrip: fix the check for ELF header
alpha/boot: fix the breakage from -isystem series...
alpha: fix FEN fault handling
alpha: Avoid comma separated statements
alpha: fixed a typo in core_cia.c
alpha: remove unused __SLOW_DOWN_IO and SLOW_DOWN_IO definitions
alpha: update config files
alpha: fix R_ALPHA_LITERAL reloc for large modules
alpha: Add some spaces to ensure format specification
alpha: replace NR_SYSCALLS by NR_syscalls
alpha: Remove redundant local asm header redirections
alpha: Implement "current_stack_pointer"
alpha: remove redundant err variable
alpha: osf_sys: reduce kernel log spamming on invalid osf_mount call typenr
Each probe has an instance of process_fetch_insn respectively,
but they have something in common.
This patch aims to extract the common part into
process_common_fetch_insn which can be shared by each probe,
and they only need to focus on their special cases.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
There are 6 function definitions in trace_probe_tmpl.h, they are:
1, fetch_store_strlen
2, fetch_store_string
3, fetch_store_strlen_user
4, fetch_store_string_user
5, probe_mem_read
6, probe_mem_read_user
Every C file which includes trace_probe_tmpl.h has to implement them,
otherwise it gets warnings and errors. However, some of them are identical,
like kprobe and eprobe, as a result, there is a lot redundant code in those
2 files.
This patch would like to provide default behaviors for those functions
which kprobe and eprobe can share by just including trace_probe_kernel.h
with trace_probe_tmpl.h together.
It removes redundant code, increases readability, and more importantly,
makes it easier to introduce a new feature based on trace probe
(it's possible).
Link: https://lore.kernel.org/all/1672382018-18347-1-git-send-email-chensong_2000@189.cn/
Signed-off-by: Song Chen <chensong_2000@189.cn>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
print_probe_args is currently inplemented in trace_probe_tmpl.h and
included by *probes, as a result, each probe has an identical copy.
This patch will move it to trace_probe.c as an new API, each probe
calls it to print their args in trace file.
Link: https://lore.kernel.org/all/1672382000-18304-1-git-send-email-chensong_2000@189.cn/
Signed-off-by: Song Chen <chensong_2000@189.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- Skip negative return code check for snprintf in eprobe.
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead of value.
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols.
- Fix kselftest to check filter on eprobe event correctly.
- Add filter on eprobe to the README file in tracefs.
- Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly.
- Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly.
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP0JdYACgkQ2/sHvwUr
Pxt6sQf/TD9Kwqx3XG1tnLPev6yt2nuggUippHwWUFHlJtMyUaLV8aKFqByyEe+j
tCQvrFIIJq242xg0Jac/MAf2exlWG9jsmVZPmvC1YzepOAbjXu2eBkIS7LsbeHjF
JJypNnEceffWCpNoD6nlvR0xWXenqRbZJwdsGqo3u+fXnzTurEMY2GU2xOyv39tv
S1uNLPANJxdMb/2iUsUE3hMbe82dqr8zPcApqWFtTBB6QPHI3B2SjuQHpQxwbTPl
bzAl0yQkLSQXprVzT7xJ4xLnzbl1ljgJBci5aX8BFF+VD9oYkypdfYVczBH5VsP9
E3eT9T9lRf4Q99EqxNy5uw7NqQXGQg==
=CMPb
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Skip negative return code check for snprintf in eprobe
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead
of value
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols
- Fix kselftest to check filter on eprobe event correctly
- Add filter on eprobe to the README file in tracefs
- Fix optprobes to check whether there is 'under unoptimizing' optprobe
when optimizing another kprobe correctly
- Fix optprobe to check whether there is 'under unoptimizing' optprobe
when fetching the original instruction correctly
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly
* tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: no need to check for negative ret value for snprintf
test_kprobes: Add recursed kprobe test case
tracing/probe: add a char type to show the character value of traced arguments
selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
selftests/ftrace: Fix eprobe syntax test case to check filter support
tracing/eprobe: Fix to add filter on eprobe description in README file
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
- Add function names as a way to filter function addresses
- Add sample module to test ftrace ops and dynamic trampolines
- Allow stack traces to be passed from beginning event to end event for
synthetic events. This will allow seeing the stack trace of when a task is
scheduled out and recorded when it gets scheduled back in.
- Add trace event helper __get_buf() to use as a temporary buffer when printing
out trace event output.
- Add kernel command line to create trace instances on boot up.
- Add enabling of events to instances created at boot up.
- Add trace_array_puts() to write into instances.
- Allow boot instances to take a snapshot at the end of boot up.
- Allow live patch modules to include trace events
- Minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3
dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc=
=M82D
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add function names as a way to filter function addresses
- Add sample module to test ftrace ops and dynamic trampolines
- Allow stack traces to be passed from beginning event to end event for
synthetic events. This will allow seeing the stack trace of when a
task is scheduled out and recorded when it gets scheduled back in.
- Add trace event helper __get_buf() to use as a temporary buffer when
printing out trace event output.
- Add kernel command line to create trace instances on boot up.
- Add enabling of events to instances created at boot up.
- Add trace_array_puts() to write into instances.
- Allow boot instances to take a snapshot at the end of boot up.
- Allow live patch modules to include trace events
- Minor fixes and clean ups
* tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
tracing: Remove unnecessary NULL assignment
tracepoint: Allow livepatch module add trace event
tracing: Always use canonical ftrace path
tracing/histogram: Fix stacktrace histogram Documententation
tracing/histogram: Fix stacktrace key
tracing/histogram: Fix a few problems with stacktrace variable printing
tracing: Add BUILD_BUG() to make sure stacktrace fits in strings
tracing/histogram: Don't use strlen to find length of stacktrace variables
tracing: Allow boot instances to have snapshot buffers
tracing: Add trace_array_puts() to write into instance
tracing: Add enabling of events to boot instances
tracing: Add creation of instances at boot command line
tracing: Fix trace_event_raw_event_synth() if else statement
samples: ftrace: Make some global variables static
ftrace: sample: avoid open-coded 64-bit division
samples: ftrace: Include the nospec-branch.h only for x86
tracing: Acquire buffer from temparary trace sequence
tracing/histogram: Wrap remaining shell snippets in code blocks
tracing/osnoise: No need for schedule_hrtimeout range
bpf/tracing: Use stage6 of tracing to not duplicate macros
...
With the change that allows to read the "trace" file without disabling
writing to the ring buffer, there was an integrity check of the ring
buffer in the iterator read code, that expected the ring buffer to be
write disabled. This caused the integrity check to trigger when stress
reading the "trace" file while writing was happening.
The integrity check is a bit aggressive (and has never triggered in
practice). Change it so that it checks just the integrity of the linked
pages without clearing the flags inside the pointers. This removes the
warning that was being triggered.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+05KBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm2uAQDpygn75IrW1aApx5wySl2GKo0dSjg9
PaQVTYFYLMxIqgEA7oZQFQwokmZrIThqcQ+JA710+C1xecKYUl+apGza9Qk=
=aTTM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix race that causes a warning of corrupt ring buffer
With the change that allows to read the "trace" file without disabling
writing to the ring buffer, there was an integrity check of the ring
buffer in the iterator read code, that expected the ring buffer to be
write disabled. This caused the integrity check to trigger when stress
reading the "trace" file while writing was happening.
The integrity check is a bit aggressive (and has never triggered in
practice). Change it so that it checks just the integrity of the
linked pages without clearing the flags inside the pointers. This
removes the warning that was being triggered"
[ Heh. This was supposed to have gone in last week before the 6.2
release, but Steven forgot to actually add me to the participants of
the pull request, so here it is, a week later - Linus ]
* tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Handle race between rb_move_tail and rb_check_pages
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that Linux
needs to save/restore.
- Include TPIDR2 in the signal context and add the corresponding
kselftests.
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time.
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64.
- Permit EFI boot with MMU and caches on. Instead of cleaning the entire
loaded kernel image to the PoC and disabling the MMU and caches before
branching to the kernel bare metal entry point, leave the MMU and
caches enabled and rely on EFI's cacheable 1:1 mapping of all of
system RAM to populate the initial page tables.
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values).
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure.
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice.
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone.
- Further arm64 sysreg conversion and some fixes.
- arm64 kselftest fixes and improvements.
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation.
- Pseudo-NMI code generation optimisations.
- Minor fixes for SME and TPIDR2 handling.
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace
strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic
shadow call stack in two passes, intercept pfn changes in set_pte_at()
without the required break-before-make sequence, attempt to dump all
instructions on unhandled kernel faults.
-----BEGIN PGP SIGNATURE-----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=VmXL
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
bdev_get_queue() never returns NULL. Several commits [1][2] have been made
before to remove such superfluous checks, but some still remained.
For places where bdev_get_queue() is called solely for NULL checks, it is
removed entirely.
[1] commit ec9fd2a13d ("blk-lib: don't check bdev_get_queue() NULL check")
[2] commit fea127b36c ("block: remove superfluous check for request queue in bdev_is_zoned()")
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230203024029.48260-1-qkrwngud825@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
No need to check for negative return value from snprintf() as the
code does not return negative values.
Link: https://lore.kernel.org/all/20230109040625.3259642-1-quanfafu@gmail.com/
Signed-off-by: Quanfa Fu <quanfafu@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
There are scenes that we want to show the character value of traced
arguments other than a decimal or hexadecimal or string value for debug
convinience. I add a new type named 'char' to do it and a new test case
file named 'kprobe_args_char.tc' to do selftest for char type.
For example:
The to be traced function is 'void demo_func(char type, char *name);', we
can add a kprobe event as follows to show argument values as we want:
echo 'p:myprobe demo_func $arg1:char +0($arg2):char[5]' > kprobe_events
we will get the following trace log:
... myprobe: (demo_func+0x0/0x29) arg1='A' arg2={'b','p','f','1',''}
Link: https://lore.kernel.org/all/20221219110613.367098-1-dolinux.peng@gmail.com/
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and Kconfig help messages in the tracing code still refer
to this older debugfs path, so let's update them to avoid confusion.
Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The current code will always use the current stacktrace as a key even
if a stacktrace contained in a specific event field was specified.
For example, we expect to use the 'unsigned long[] stack' field in the
below event in the histogram:
# echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' > /sys/kernel/debug/tracing/dynamic_events
# echo 'hist:keys=delta.buckets=100,stack.stacktrace:sort=delta' > /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
But in fact, when we type out the trigger, we see that it's using the
plain old global 'stacktrace' as the key, which is just the stacktrace
when the event was hit and not the stacktrace contained in the event,
which is what we want:
# cat /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
hist:keys=delta.buckets=100,stacktrace:vals=hitcount:sort=delta.buckets=100:size=2048 [active]
And in fact, there's no code to actually retrieve it from the event,
so we need to add HIST_FIELD_FN_STACK and hist_field_stack() to get it
and hook it into the trigger code. For now, since the stack is just
using dynamic strings, this could just use the dynamic string
function, but it seems cleaner to have a dedicated function an be able
to tweak independently as necessary.
Link: https://lkml.kernel.org/r/11aa614c82976adbfa4ea763dbe885b5fb01d59c.1676063532.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Fixed 32bit build warning reported by kernel test robot <lkp@intel.com> ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, there are a few problems when printing hist triggers and
trace output when using stacktrace variables. This fixes the problems
seen below:
# echo 'hist:keys=delta.buckets=100,stack.stacktrace:sort=delta' > /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
# cat /sys/kernel/debug/tracing/events/synthetic/block_lat/trigger
hist:keys=delta.buckets=100,stacktrace:vals=hitcount:sort=delta.buckets=100:size=2048 [active]
# echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 2' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
hist:keys=next_pid:vals=hitcount:ts=common_timestamp.usecs,st=stacktrace.stacktrace:sort=hitcount:size=2048:clock=global if prev_state == 2 [active]
and also in the trace output (should be stack.stacktrace):
{ delta: ~ 100-199, stacktrace __schedule+0xa19/0x1520
Link: https://lkml.kernel.org/r/60bebd4e546728e012a7a2bcbf58716d48ba6edb.1676063532.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The max string length for a histogram variable is 256 bytes. The max depth
of a stacktrace is 16. With 8byte words, that's 16 * 8 = 128. Which can
easily fit in the string variable. The histogram stacktrace is being
stored in the string value (with the given max length), with the
assumption it will fit. To make sure that this is always the case (in the
case that the stack trace depth increases), add a BUILD_BUG_ON() to test
this.
Link: https://lore.kernel.org/linux-trace-kernel/20230214002418.0103b9e765d3e5c374d2aa7d@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Because stacktraces are saved in dynamic strings,
trace_event_raw_event_synth() uses strlen to determine the length of
the stack. Stacktraces may contain 0-bytes, though, in the saved
addresses, so the length found and passed to reserve() will be too
small.
Fix this by using the first unsigned long in the stack variables to
store the actual number of elements in the stack and have
trace_event_raw_event_synth() use that to determine the length of the
stack.
Link: https://lkml.kernel.org/r/1ed6906cd9d6477ef2bd8e63c61de20a9ffe64d7.1676063532.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Just after the fix to TASK_COMM_LEN not converted to its value in
trace_events was pulled, the kernel test robot reported that the helper
function trace_define_field_ext() added to that change was only used in
the file it was defined in but was not declared static. Make it a local
function.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+pQvhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWMAP958Izvo22zPjlvqypLrC4wkwOrU6BG
ITApOESLGS6YMAEA3X1qVpjgXClFmRv6j+J7S6LdhUzhkOm9Sxg5Vejxzgo=
=4fmj
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixlet from Steven Rostedt:
"Make trace_define_field_ext() static.
Just after the fix to TASK_COMM_LEN not converted to its value in
trace_events was pulled, the kernel test robot reported that the
helper function trace_define_field_ext() added to that change was only
used in the file it was defined in but was not declared static.
Make it a local function"
* tag 'trace-v6.2-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make trace_define_field_ext() static
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian]
Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc2 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reference to other arch likes x86_64 or arm64 to do this replacement.
To solve compile error when using NR_syscalls in kernel[1].
[1] https://lore.kernel.org/all/202203270449.WBYQF9X3-lkp@intel.com/
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Steven Rostedt (Google)