The --interval-print parameter was limited to 100ms. However, for
example, 10ms is required to do sophisticated bandwidth analysis using
uncore events.
The test shows that the overhead of the system-wide uncore monitoring
with 10ms interval is only ~2%. So this patch reduces the minimal
interval-print allowd to 10ms.
But 10ms may not work well for all cases. For example, when the
cpus/threads number is very large, for system-wide core event monitoring
the overhead could be high.
To handle this issue, a warning will be displayed when the
interval-print is set between 10ms to 100ms. So users can make a
decision according to their specific cases.
# perf stat -e uncore_imc_1/cas_count_read/ -a --interval-print 10 -- sleep 1
print interval < 100ms. The overhead percentage could be high in some
cases. Please proceed with caution.
# time counts unit events
0.010200451 0.10 MiB uncore_imc_1/cas_count_read/
0.020475117 0.02 MiB uncore_imc_1/cas_count_read/
0.030692800 0.01 MiB uncore_imc_1/cas_count_read/
0.040948161 0.02 MiB uncore_imc_1/cas_count_read/
0.051159564 0.00 MiB uncore_imc_1/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1443776674-42511-1-git-send-email-kan.liang@intel.com
[ Added warning about overhead when using sub 100ms intervals to the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When run "perf record -e", the number of samples showed up is wrong on some
32 bit systems, i.e. powerpc and arm.
For example, run the below commands on 32 bit powerpc:
perf probe -x /lib/libc.so.6 malloc
perf record -e probe_libc:malloc -a ls perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.036 MB perf.data (13829241621624967218 samples) ]
Actually, "perf script" just shows 21 samples. The number of samples is also
absurd since samples is long type, but it is printed as PRIu64.
Build test ran on x86-64, x86, aarch64, arm, mips, ppc and ppc64.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/1443563383-4064-1-git-send-email-yang.shi@linaro.org
[ Bumped the 'hits' var used together with record.samples to 'unsigned long long' too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow probing on kernel modules when 'perf' is built without debuginfo
support.
Currently perf-probe --module requires linking with libdw, but this
doesn't make sense.
E.g.
----
# make NO_DWARF=1
# ./perf probe -m pcspkr pcspkr_event%return
Error: unknown switch `m'
----
With this patch
----
# ./perf probe -m pcspkr pcspkr_event%return
Added new event:
probe:pcspkr_event (on pcspkr_event%return in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151002125832.18617.78721.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some PMUs, like the 'intel_bts' one can be used as an event name, i.e.:
$ perf record -e intel_bts:// usleep 1
Is a valid event name.
But the code printing such PMUs was not honouring the 'event_glob'
parameter, so the following line was always appearing:
$ intel_bts// [Kernel PMU event]
Fix it:
$ [acme@felicio linux]$ perf list data
List of pre-defined events (to be used in -e):
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ajb71858n7q7ao77b8pyy74w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch f9db0d0f1b ("perf callchain: Allow disabling call graphs
per event") added an ability to enable/disable callchain recording per
event. But it had a problem when the enablement setting is changed at
'perf report' time using -g/--call-graph option.
For example, the following scenario will get a segfault.
$ perf record -ag sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.500 MB perf.data (2555 samples) ]
$ perf report -g none
perf: Segmentation fault
-------- backtrace --------
perf[0x53a98a]
/usr/lib/libc.so.6(+0x335af)[0x7f4e91df95af]
This is because callchain_param.sort() callback was not set but it
tried to call the function as it had the PERF_SAMPLE_CALLCHAIN bit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: f9db0d0f1b ("perf callchain: Allow disabling call graphs per event")
Link: http://lkml.kernel.org/r/1443587640-24242-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top didn't add the idle/swapper thread to the machine's thread
list and its comm was displayed as ':0'. Fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf top uses 'dso,symbol' sort keys by default so it overlooked a
problem in task's comm resolving. When the sort key contains 'comm',
some task's comm is not shown properly. This is because the
perf_top__mmap_read_idx() checks the cpumode value improperly.
The cpumode value of non-sample events are 0 (PERF_RECORD_MISC_CPUMODE_
UNKNOWN) so the events will be ignored by the switch statement. This patch
allows it for non-sample events.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A previous patch added a synthesized comm event for forked child process
but it missed that the event should contain area for sample_id_hdr at
the end. It worked by accident since the perf_event union contains
bigger event structs like mmap_events.
This patch fixes it by dynamically allocating event struct including
those area like in perf_event__synthesize_thread_map().
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the user doesn't specify any event, try the most precise "cycles"
available, i.e. start by "cycles:ppp" and go on removing "p" till it
works.
E.g.
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (11 samples) ]
$ perf evlist
cycles:pp
$ perf evlist -v
cycles:pp: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, precise_ip: 2, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
$ grep 'model name' /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz
$
When 'cycles' appears explicitely is specified this will not be tried,
i.e. the user has full control of the level of precision to be used:
$ perf record -e cycles usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (9 samples) ]
$ perf evlist
cycles
$ perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1,
enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2:
1, comm_exec: 1
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://www.youtube.com/watch?v=nXaxk27zwlk
Link: http://lkml.kernel.org/n/tip-b1ywebmt22pi78vjxau01wth@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can, for instance, use it with wc -l:
# perf list *:*write* | wc -l
60
Or to look for the "bio" tracepoints, without 'perf list' headers:
# perf list *:*bio* | head
block:block_bio_backmerge [Tracepoint event]
block:block_bio_bounce [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_frontmerge [Tracepoint event]
block:block_bio_queue [Tracepoint event]
block:block_bio_remap [Tracepoint event]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe shows more precisely message when it finds given
%return target function is inlined.
Without this fix:
----
# ./perf probe -V getname_flags%return
Return probe must be on the head of a real function.
Debuginfo analysis failed.
Error: Failed to show vars.
----
With this fix:
----
# ./perf probe -V getname_flags%return
Failed to find "getname_flags%return",
because getname_flags is an inlined function and has no return point.
Debuginfo analysis failed.
Error: Failed to show vars.
----
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164137.3733.55055.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe --list will get a segfault if the first kprobe event is on a
module and the second or latter one is on the kernel.
e.g.
----
# ./perf probe -q -m pcspkr pcspkr_event
# ./perf probe -q vfs_read
# ./perf probe -l
Segmentation fault (core dumped)
----
This is because the debuginfo_cache fails to handle NULL module name,
which causes segfault on strcmp. (Note that strcmp("something", NULL)
always causes segfault)
To fix this debuginfo_cache__open always translates the NULL module name
to "kernel" (this is correct, because NULL module name means opening the
debuginfo for the kernel)
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event@drivers/input/misc/pcspkr.c
in pcspkr)
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164135.3733.23993.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf probe always failed to find appropriate line numbers because of
failing to find .text start address offset from debuginfo.
e.g.
----
# ./perf probe -m pcspkr pcspkr_event:5
Added new events:
probe:pcspkr_event (on pcspkr_event:5 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5 in pcspkr)
You can now use it in all perf tools, such as:
perf record -e probe:pcspkr_event_1 -aR sleep 1
# ./perf probe -l
Failed to find debug information for address ffffffffa031f006
Failed to find debug information for address ffffffffa031f016
probe:pcspkr_event (on pcspkr_event+6 in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event+22 in pcspkr)
----
This fixes the above issue as below.
1. Get the relative address of the symbol in .text by using
map->start.
2. Adjust the address by adding the offset of .text section
in the kernel module binary.
With this fix, perf probe -l shows lines correctly.
----
# ./perf probe -l
probe:pcspkr_event (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
probe:pcspkr_event_1 (on pcspkr_event:5@drivers/input/misc/pcspkr.c in pcspkr)
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164132.3733.24643.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a trival bug about libdwfl usage of the report session, it should
explicitly begin and end a report session around dwfl_report_offline().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164128.3733.59876.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to remove dot suffix (e.g. .const, .isra) from the second or latter
events which has suffix numbers.
Since the previous commit 35a23ff928 ("perf probe: Cut off the gcc
optimization postfixes from function name") didn't care about the suffix
numbered events, therefore we'll have an error when we add additional
events on the same dot suffix functions.
e.g.
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Failed to write event: Invalid argument
Error: Failed to add events.
----
This fixes above issue as below:
----
# ./perf probe -f -a get_sigframe.isra.2.constprop.3 \
-a get_sigframe.isra.2.constprop.3
Added new events:
probe:get_sigframe (on get_sigframe.isra.2.constprop.3)
probe:get_sigframe_1 (on get_sigframe.isra.2.constprop.3)
You can now use it in all perf tools, such as:
perf record -e probe:get_sigframe_1 -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150930164130.3733.26573.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is about binding, not type, we have just a letter in kallsyms that
should map both for the ELF type (STT_FUNC, etc) and to the ELF
symbol binding (STB_WEAK, STB_GLOBAL, etc), so rename it now before
introducing kallsyms2_elf_type()
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uu5vj343ms1q2wm55690on6v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And it is also a step in the direction of killing the separation of data
and text maps in map_groups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rrds86kb3wx5wk8v38v56gw8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where we were using its open coded equivalent.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-khkdugcdoqy3tkszm3jdxgbe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_regs.c file does not get built on Powerpc as CONFIG_PERF_REGS
is false. So the weak definition for 'sample_regs_masks' doesn't get
picked up.
Adding perf_regs.o to util/Build unconditionally, exposes a redefinition
error for 'perf_reg_value()' function (due to the static inline version
in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that
function.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20150930182836.GA27858@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --max_stack option was added as an optimization to reduce processing time,
so people specifying --max-stack might get a increased processing time if
combined with synthesized callchains, but otherwise no real harm.
A warning about setting both --max_stack and the synthesized callchains max
depth seems like overkill. Amend the documentation.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/560A5155.4060105@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of map_groups__find_symbol_by_name(), so that we can turn this later
one first into a call to maps__find_symbol_by_name(MAP__FUNCTION) +
MAP__VARIABLE, and then to just one call, we'll merge MAP__FUNCTION with
MAP__VARIABLE maps, to simplify the code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pvkar0jacqn92g148u9sqttt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to a collision with a
global error symbol:
CC util/parse-events.o
cc1: warnings being treated as errors
util/parse-events.c:419: error: declaration of ‘error’ shadows a global
declaration
util/util.h:135: error: shadowed declaration is here
util/parse-events.c: In function ‘add_tracepoint_multi_event’:
...
Using different argument names instead to fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-tip-commits@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150929150531.GI27383@krava.redhat.com
[ Fix one more case, at line 770 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds rules for parsing tracepoint names. Change rules of tracepoint which
derives from PE_NAMEs into tracepoint names directly, so adding more rules
based on tracepoint names will be easier.
Changes v2-v3:
- Change __event_legacy_tracepoint label in bison file to tracepoint_name
- Fix formats error.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-3-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show proper error message and show valid terms when wrong config terms
is specified for hw/sw type perf events.
This patch makes the original error format function formats_error_string()
more generic, which only outputs the static config terms for hw/sw perf
events, and prepends pmu formats for pmu events.
Before this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
invalid or unsupported event: 'cpu-clock/freqx=200/'
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
After this patch:
$ perf record -e 'cpu-clock/freqx=200/' -a sleep 1
event syntax error: 'cpu-clock/freqx=200/'
\___ unknown term
valid terms: config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size
Run 'perf list' for a list of valid events
usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, function config_term() is used for checking config terms of
all types of events, while unknown terms is not reported as an error
because pmu events have valid terms in sysfs.
But this is wrong when unknown terms are specificed to hw/sw events.
This patch Adds the config_term callback so we can use separate check
routines for each type of events.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1443412336-120050-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
autofdo incorrectly expects branch flags to include either mispred or
predicted. In fact mispred = predicted = 0 is valid and means the flags
are not supported, which they aren't by Intel PT.
To make autofdo work, add a config option which will cause Intel PT
decoder to set the mispred flag on all branches.
Below is an example of using Intel PT with autofdo. The example is
also added to the Intel PT documentation. It requires autofdo
(https://github.com/google/autofdo) and gcc version 5. The bubble
sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial)
amended to take the number of elements as a parameter.
$ gcc-5 -O3 sort.c -o sort_optimized
$ ./sort_optimized 30000
Bubble sorting array of 30000 elements
2254 ms
$ cat ~/.perfconfig
[intel-pt]
mispred-all
$ perf record -e intel_pt//u ./sort 3000
Bubble sorting array of 3000 elements
58 ms
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.939 MB perf.data ]
$ perf inject -i perf.data -o inj --itrace=i100usle --strip
$ ./create_gcov --binary=./sort --profile=inj --gcov=sort.gcov -gcov_version=1
$ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo
$ ./sort_autofdo 30000
Bubble sorting array of 30000 elements
2155 ms
Note there is currently no advantage to using Intel PT instead of LBR,
but that may change in the future if greater use is made of the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-26-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new option --strip which is used with --itrace to strip out
non-synthesized events. This results in a perf.data file that is
simpler for external tools to parse. In particular, this can be used to
prepare a perf.data file for consumption by autofdo.
A subsequent patch makes a change to Intel PT also to enable use with
autofdo and gives an example of that use.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-25-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf inject can process instruction traces (using the --itrace option)
which removes aux-related events and replaces them with the requested
synthesized events.
However there are still some leftovers, namely PERF_RECORD_ITRACE_START
events and the original evsel (selected event) e.g. intel_pt//
For the sake of completeness, remove them too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-24-git-send-email-adrian.hunter@intel.com
[ Made it use perf_evlist__remove() + perf_evsel__delete() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a counterpart to perf_evlist__add() that does the opposite and
deletes the evsel.
This will be used by perf inject to remove unwanted evsels.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-23-git-send-email-adrian.hunter@intel.com
[ Renamed it from perf_evlist__del() to perf_evlist__remove() and removed the perf_evsel__delete() call ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__id2evsel_strict() is the same as perf_evlist__id2evsel()
except that it ensures that the id must match.
This will be used by perf inject to find a specific evsel that is to be
deleted, hence the need to match exactly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script has a setting to set the maximum stack depth when processing
callchains. The setting defaults to the hard-coded maximum definition
PERF_MAX_STACK_DEPTH which is 127.
It is possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the scripting_max_stack value
at least the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-21-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the max_stack value instead of PERF_MAX_STACK_DEPTH so that
arbitrary-sized callchains can be supported.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report has an option (--max-stack) to set the maximum stack depth
when processing callchains. The option defaults to the hard-coded
maximum definition PERF_MAX_STACK_DEPTH which is 127. The intention of
the option is to allow the user to reduce the processing time by
reducing the amount of the callchain that is processed.
It is also possible, when processing instruction traces, to synthesize
callchains. Synthesized callchains do not have the kernel size
limitation and are whatever size the user requests, although validation
presently prevents the user requested a value greater that 1024. The
default value is 16.
To allow for synthesized callchains, make the max_stack value at least
the same size as the synthesized callchain size.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for generating branch stack context for PT samples. The
decoder reports a configurable number of branches as branch context for
each sample. Internally it keeps track of them by using a simple sliding
window. We also flush the last branch buffer on each sample to avoid
overlapping intervals.
This is useful for:
- Reporting accurate basic block edge frequencies through the perf
report branch view
- Using with --branch-history to get the wider context of samples
- Other users of LBRs
Also the Documentation is updated.
Examples:
Record with Intel PT:
perf record -e intel_pt//u ls
Branch stacks are used by default if synthesized so:
perf report --itrace=ile
is the same as:
perf report --itrace=ile -b
Branch history can be requested also:
perf report --itrace=igle --branch-history
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_synth_branch_sample() skips synthesizing if the branch does not
match the branch filter. That logic was sitting in the middle of the
function but is more efficiently placed at the start of the function, so
move it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch stack feature flag is set by 'perf record' when recording
data that contains branch stacks. Consequently, when 'perf inject'
synthesizes branch stacks, the feature flag should be set also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A non-synthesized event might not have a branch stack if branch stacks
have been synthesized (using itrace options).
An example of that is when Intel PT records sched_switch events for
decoding purposes. Those sched_switch events do not have branch stacks
even though the Intel PT decoder may be synthesizing other events that
do due to the itrace options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool will default to displaying branch stacks (-b
option) if they are present. Make that also happen for synthesized
branch stacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report looks at event sample types to determine if branch stacks
have been sampled. Adjust the validation to know about instruction
tracing options.
This change allows the use of the -b option which otherwise would
complain with an error like:
Error:
Selected -b but no branch data. Did you call perf record without -b?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add AUX area tracing option 'l' to synthesize branch stacks on samples
just like sample type PERF_SAMPLE_BRANCH_STACK. This is taken into use
by Intel PT in a subsequent patch.
Based-on-patch-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some comments to the script and some 'views' to the created database
that better illustrate the database structure and how it can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default 'perf record' will postprocess the perf.data file to
determine build-ids. When that happens, the number of lost perf events
is displayed.
Make that also happen for AUX events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option --ns to display time to 9 decimal places. That is useful in
some cases, for example when using Intel PT cycle accurate mode.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Logging is only used for debugging. Use macros to save calling into the
functions only to return immediately when logging is not enabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TSC packets contain only 7 bytes of TSC. The 8th byte is assumed to
change so infrequently that its value can be inferred. However the
logic must cater for a 7 byte wraparound, which it does by adding 1 to
the top byte.
The existing code was doing that with a while loop even though the
addition should only need to be done once. That logic won't work (will
loop forever) if TSC wraps around at the 8th byte. Theoretically that
would take at least 10 years, unless something else went wrong.
And what else could go wrong. Well, if the chunks of trace data are
processed out of order, it will make it look like the 7-byte TSC has
gone backwards (i.e. wrapped). If that happens 256 times then stuck in
the while loop it will be.
Fix that by getting rid of the unnecessary while loop.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Processing instruction tracing data (e.g. Intel PT) can synthesize
callchains e.g.
$ perf record -e intel_pt//u uname
$ perf report --stdio --itrace=ige
However perf report's callgraph option gets extra validation, so:
$ perf report --stdio --itrace=ige -gflat
Error:
Selected -g or --branch-history but no callchain data. Did
you call 'perf record' without -g?
# To display the perf.data header info,
# please use --header/--header-only options.
#
Fix the validation to know about instruction tracing options so
above command works.
A side-effect of the change is that the default option to
accumulate the callchain of child functions comes into force.
To get the previous behaviour the --no-children option can be
used e.g.
$ perf report --stdio --itrace=ige -gflat --no-children
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction tracing options (i.e. --itrace) include an option for
sampling instructions at an arbitrary period. e.g.
--itrace=i10us
means make an 'instructions' sample for every 10us of trace.
Currently the logic does not distinguish between a period of
zero and no period being specified at all, so it gets treated
as the default period which is 100000. That doesn't really
make sense.
Fix it so that zero period is accepted and treated as meaning
"as often as possible".
In the case of Intel PT that is the same as a period of 1 and
a unit of 'instructions' (i.e. --itrace=i1i).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443186956-18718-2-git-send-email-adrian.hunter@intel.com
[ Add a few lines describing this in the Documentation/intel-pt.txt file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And use the new 'prepare' target for the $(PERF_IN) target.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ease up build framework code setup for users.
More shared code will be added in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map is what should say if an ELF (or some other format) image is
being used for some particular purpose, as a kernel, host or guest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zufousvfar0710p4qj71c32d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using dso->kernel, this is equivalent at the moment,
and helps in reducing the accesses to dso->kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1pc2v63iphtifovw3bv0bo1v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A copy of /proc/kcore containing the kernel text can be made to the
buildid cache. e.g.
perf buildid-cache -v -k /proc/kcore
To workaround objdump limitations, a copy is also made when annotating
against /proc/kcore.
The copying process stops working from libelf about v1.62 onwards (the
problem was found with v1.63).
The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails
because additional validation has been added to gelf_getphdr().
The use of gelf_getphdr() is a misguided attempt to get default
initialization of the Gelf_Phdr structure. That should not be
necessary because every member of the Gelf_Phdr structure is
subsequently assigned. So just remove the call to gelf_getphdr().
Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be
removed also.
Committer notes:
Note to stable@kernel.org, from Adrian in the cover letter for this
patchkit:
The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think
it is important enough for stable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
no_force_psb was dropped as a late change to the kernel driver.
Consequently, remove it from the documentation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1443089122-19082-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have map_groups__find_by_name() to look at the list of modules that
are in place for a given machine, so use it instead of traversing the
machine dso list, which also includes DSOs for userspace.
When merging the user and kernel DSO lists a bug was introduced where
'perf probe' stopped being able to add probes to modules using its short
name:
# perf probe -m usbnet --add usbnet_start_xmit
usbnet_start_xmit is out of .text, skip it.
Error: Failed to add events.
#
With this fix it works again:
# perf probe -m usbnet --add usbnet_start_xmit
Added new event:
probe:usbnet_start_xmit (on usbnet_start_xmit in usbnet)
You can now use it in all perf tools, such as:
perf record -e probe:usbnet_start_xmit -aR sleep 1
#
Reported-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Link: http://lkml.kernel.org/r/20150924015008.GE1897@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Fix a segfault in 'perf probe' when removing uprobe events (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h
(Arnaldo Carvalho de Melo)
Developer stuff:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/ (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6DJ/
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Fix a segfault in 'perf probe' when removing uprobe events. (Masami Hiramatsu)
- Synthesize COMM event for workloads started from the command line in 'perf
record' so that we can have the pid->comm mapping before we get the real
PERF_RECORD_COMM switching from perf to the workload. (Namhyung Kim)
- Fix build tools/vm/ due to removal of tools/lib/api/fs/debugfs.h.
(Arnaldo Carvalho de Melo)
Infrastructure changes:
- Fix the make tarball targets by including the recently added err.h header in
the perf MANIFEST file. (Jiri Olsa)
- Don't assume that the event parser returns a non empty evlist. (Wang Nan)
- Add way to disambiguate feature detection state files, needed to use
tools/build feature detection for multiple components in a single O= output
dir, which will be the case with tools/perf/ and tools/lib/bpf/.
(Arnaldo Carvalho de Melo)
- Fixup FEATURE_{TESTS,DISPLAY} inversion in tools/lib/bpf/. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When perf creates a new child to profile, the events are enabled on
exec(). And in this case, it doesn't synthesize any event for the
child since they'll be generated during exec(). But there's an window
between the enabling and the event generation.
It used to be overcome since samples are only in kernel (so we always
have the map) and the comm is overridden by a later COMM event.
However it won't work if events are processed and displayed before the
COMM event overrides like in 'perf script'. This leads to those early
samples (like native_write_msr_safe) not having a comm but pid (like
':15328').
So it needs to synthesize COMM event for the child explicitly before
enabling so that it can have a correct comm. But at this time, the
comm will be "perf" since it's not exec-ed yet.
Committer note:
Before this patch:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task-events
:4429 4429 27909.079372: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079375: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079376: 10 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079377: 223 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
:4429 4429 27909.079378: 6571 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 4429 27909.079380: PERF_RECORD_COMM exec: usleep:4429/4429
usleep 4429 27909.079381: 185403 cycles: ffffffff810a72d3 flush_signal_handlers (/lib/modules/4.
usleep 4429 27909.079444: 2241110 cycles: 7fc575355be3 _dl_start (/usr/lib64/ld-2.20.so)
usleep 4429 27909.079875: PERF_RECORD_EXIT(4429:4429):(4429:4429)
After:
# perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
# perf script --show-task
perf 0 0.000000: PERF_RECORD_COMM: perf:8446/8446
perf 8446 30154.038944: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038948: 1 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038949: 9 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038950: 230 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
perf 8446 30154.038951: 6772 cycles: ffffffff8105f45a native_write_msr_safe (/lib/modules/4.
usleep 8446 30154.038952: PERF_RECORD_COMM exec: usleep:8446/8446
usleep 8446 30154.038954: 196923 cycles: ffffffff81766440 _raw_spin_lock (/lib/modules/4.3.0-rc1
usleep 8446 30154.039021: 2292130 cycles: 7f609a173dc4 memcpy (/usr/lib64/ld-2.20.so)
usleep 8446 30154.039349: PERF_RECORD_EXIT(8446:8446):(8446:8446)
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1442881495-2928-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise the tarpkg is incomplete (tarpkg tests fails).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 01ca9fd41d ("tools: Add err.h with ERR_PTR PTR_ERR interface")
Link: http://lkml.kernel.org/r/1442846143-8556-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't blindly retrieve and use a last element in the lists returned by
parse_events__scanner(), as it may have collected no entries, i.e.
return an empty list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a segfault bug and a small mistake in perf probe -d.
Since the "ulist" in perf_del_probe_events is never initialized,
strlist__add(ulist, *) always causes a segfault when removing
uprobe events by perf probe -d.
Also, the "str" local variable is never released if fail to
allocate the "klist". This fixes it too.
This has been introduced by the commit e607f1426b ("perf probe:
Print deleted events in cmd_probe()").
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150916125241.4446.44805.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a session contains no events, we can get stuck in an infinite loop in
__perf_session__process_events, with a non-zero file_size and data_offset, but
a zero data_size.
In this case, we can mmap the entirety of the file (consisting of the file and
attribute headers), and fetch_mmaped_event will correctly refuse to read any
(unmapped and non-existent) event headers. This causes
__perf_session__process_events to unmap the file and retry with the exact same
parameters, getting stuck in an infinite loop.
This has been observed to result in an exit-time hang when counting
rare/unschedulable events with perf record, and can be triggered artificially
with the script below:
----
#!/bin/sh
printf "REPRO: launching perf\n";
./perf record -e software/config=9/ sleep 1 &
PERF_PID=$!;
sleep 0.002;
kill -2 $PERF_PID;
printf "REPRO: waiting for perf (%d) to exit...\n" "$PERF_PID";
wait $PERF_PID;
printf "REPRO: perf exited\n";
----
To avoid this, have __perf_session__process_events bail out early when
the file has no data (i.e. it has no events).
Commiter note:
I only managed to reproduce this when setting
/proc/sys/kernel/kptr_restrict to '1' and changing the code to
purposefully not process any samples and no synthesized samples, i.e.
kptr_restrict prevents 'record' from synthesizing the kernel mmaps for
vmlinux + modules and since it is a workload started from perf, we don't
synthesize mmap/comm records for existing threads.
Adrian Hunter managed to reproduce it in his environment tho.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1442423929-12253-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Returning a negative value for a boolean function seem to have the
undesired effect of returning true. Replace -1 by false in a
bool-returning function.
The diff of the .s file before and after the change (for x86_64):
3907c3907
< movl $1, %ebx
---
> xorl %ebx, %ebx
while if -1 is replaced by true, the diff is empty.
This issue was found by the following Coccinelle semantic patch:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Milos Vyletel <milos@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1442484533-19742-1-git-send-email-peter.senna@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin,
that is not present in old systems, breaking the build.
Add a test to check for that builtin and disable AUXTRACE in those
systems.
[acme@rhel5 linux]$ make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
<SNIP>
... lzma: [ on ]
... get_cpuid: [ OFF ]
<SNIP>
config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
MKDIR /tmp/build/perf/util/
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:
[acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j2' parallel build
Auto-detecting system features:
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ on ]
<SNIP>
config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8
INSTALL binaries
<SNIP>
This fixes the build on old systems such as RHEL/CentOS 5.11.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit f785f23576.
We have a test to check if elf_getphdrnum() is present, so, if it fails,
we'll get:
[acme@rhel5 linux]$ cat /tmp/build/perf/feature/test-libelf-getphdrnum.make.output
cc1: warnings being treated as errors
test-libelf-getphdrnum.c: In function ‘main’:
test-libelf-getphdrnum.c:7: warning: implicit declaration of function ‘elf_getphdrnum’
[acme@rhel5 linux]$
And this block will not be compiled:
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
static int elf_getphdrnum(Elf *elf, size_t *dst)
...
#endif
So, if elf_getphdrnum() is being defined somewhere, there is a problem
with the test that is not detecting that function, go fix it.
Reported-by: Vinson Lee <vlee@twopensource.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qn459fal6acvcvm50i8zxx9k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-pkg events need to be captured once per processor socket. The code
in check_per_pkg() ensures only one value per processor package is used.
However there is a problem with this function in case the first CPU of
the package does not measure anything for the per-pkg event, but other
CPUs do.
Consider the following:
$ create cgroup FOO; echo $$ >FOO/tasks; taskset -c 1 noploop &
$ perf stat -a -I 1000 -e intel_cqm/llc_occupancy/ -G FOO sleep 100
1.00000 <not counted> Bytes intel_cqm/llc_occupancy/ FOO
The reason for this is that CPU0 in the cgroup has nothing running on it.
Yet check_per_plg() will mark socket0 as processed and no other event
value will be considered for the socket.
This patch fixes the problem by having check_per_pkg() only consider
events which actually ran.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441286620-10117-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test software clock events have valid period values"
was setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test titled "Test number of exit event of a simple workload" was
setting cpu/thread maps directly. Make it use the proper function
perf_evlist__set_maps() especially now that it also propagates the maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix it by making it call perf_evlist__set_maps() instead of setting the
maps itself.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsels are added after maps are created, then they won't have any
maps propagated to them. Fix that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-12-git-send-email-adrian.hunter@intel.com
[ Moved the moving of propagate_maps() to the patch before, so that this
one does _just_ the one lile fix calling in add()]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent fixes will need a function that just propagates maps for a
single evsel so factor it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-11-git-send-email-adrian.hunter@intel.com
[ Moved them to before perf_evlist__add() to avoid having to move it in the next patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there is a function to set maps, perf_evlist__create_maps() should
use it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf_evlist__set_maps() more resilient by allowing for the
possibility that one or another of the maps isn't being changed and
therefore should not be "put".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() cannot easily tell if an evsel has its own
cpu map. To make that simpler, keep a copy of the PMU cpu map and
adjust the propagation logic accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__propagate_maps() incorrectly assumes evsel->threads is NULL
before reassigning it, but it won't be NULL when perf_evlist__set_maps()
is used to set different (or NULL) maps. Thus thread_map__put must be
used, which works even if evsel->threads is NULL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d49e469507 ("perf evsel: Add a backpointer to the evlist a
evsel is in") updated perf_evlist__add() but not
perf_evlist__splice_list_tail().
This illustrates that it is better if perf_evlist__splice_list_tail()
calls perf_evlist__add() instead of duplicating the logic, so do that.
This will also simplify a subsequent fix for propagating maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subsequent patches will need to call perf_evlist__propagate_maps without
reference to a "target". Add evlist->has_user_cpus to record whether
the user has specified which cpus to target (and therefore whether that
list of cpus should override the default settings for a selected event
i.e. the cpu maps should be propagated)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The validation checks that the values that were just assigned, got
assigned i.e. the error can't ever happen. Subsequent patches will call
this code in places where errors are not being returned. Changing those
code paths to return this non-existent error is counter-productive, so
just remove it.
That in turn results in perf_evlist__set_maps not needing to return an
error, but callers aren't checking it either, so remove that too.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't need to check for NULL when "putting" evlist->maps and
evlist->threads because the "put" functions already do that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsel->cpus is to be reassigned then the current value must be "put",
which works even if it is NULL. Simplify the current logic by moving
the "put" next to the assignment.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1441699142-18905-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator. Since the function is
identical, try to reuse the code in arch/x86/kernel/ptrace.c.
Comment inside dwarf-regs.c list the differences between this
implementation and kernel code.
get_arch_regstr() switches to regoffset_table and the old string table
is dropped.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-20-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
regs_query_register_offset() is a helper function which converts
register name like "%rax" to offset of a register in 'struct pt_regs',
which is required by BPF prologue generator.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture
supports converting name of a register to its offset in 'struct
pt_regs'.
HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding
CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Extracted from eBPF patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhancing parsing events tracepoint error output. Adding
more verbose output when the tracepoint is not found or
the tracing event path cannot be access.
$ sudo perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ unknown tracepoint
Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
...
$ perf record -e sched:sched_krava ls
event syntax error: 'sched:sched_krava'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug'
Run 'perf list' for a list of valid events
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Propagate error info from tp_format via ERR_PTR to get it all the way
down to the parse-event.c tracepoint adding routines. Following
functions now return pointer with encoded error:
- tp_format
- trace_event__tp_format
- perf_evsel__newtp_idx
- perf_evsel__newtp
This affects several other places in perf, that cannot use pointer check
anymore, but must utilize the err.h interface, when getting error
information from above functions list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-5-git-send-email-jolsa@kernel.org
[ Add two missing ERR_PTR() and one IS_ERR() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint
adding path. It will be filled with error data in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The init/exit_symbols_maps() functions are to setup and cleanup
necessary info for probe events. But they need to be called from out of
the probe code now, so this patch exports them.
However the names are too generic, so change them to have 'probe'. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cleanup_perf_probe_events() frees all resources related to a perf
probe event. However it only freed resources in trace probe events, not
perf probe events. So call clear_perf_probe_event() too.
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1441852026-28974-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf top' segfaults with following operation:
# perf top -e page-faults -p 11400 # 11400 never generates page-fault
Then on the resulting empty interface, press right key:
# ./perf top -e page-faults -p 11400
perf: Segmentation fault
-------- backtrace --------
./perf[0x535428]
/lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
./perf[0x531d46]
./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
./perf[0x44ba2f]
/lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
/lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test case for hists socket filter.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.
This patch extends it for the processor sockets.
'S' is the short key to zoom into current Processor Socket.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
just like with the other zoom ops;
- Make it use browser->pstack, to unzoom level by level;
- Rename 'socket' variables to 'socket_id' to make it build on
older systems where it shadows a global glibc declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This information will come from perf.data files of from the current
system, cached when needed, such as when the 'socket' sort order gets
introduced.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441377946-44429-1-git-send-email-kan.liang@intel.com
[ Don't blindly use env->cpu[al.cpu].socket_id & use machine->env, fixes by Jiri & Arnaldo ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'struct machine' represents the machine where the samples were/are
being collected, and we also have a 'struct perf_env' with extra details
about such machine, that we were collecting at 'perf.data' creation time
but we also needed when no perf.data file is being used, such as in
'perf top'.
So, get those structs closer together, as they provide a bigger picture
of the sample's environment.
In 'perf session', when the file argument is NULL, we can assume that
the tool is sampling the running machine, so point machine->env to
the global put in place in previous patches, while set it to the
perf_header.env one when reading from a file.
This paves the way for machine->env to be used in
perf_event__preprocess_sample to populate addr_location.socket.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ajotl0khscutm68exictoy9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code to write the cpu topology map in the perf.data file
header.
Now if one needs the CPU topology map for the running machine, one needs
to call perf_env__read_cpu_topology_map(perf_env) and the info will be
stored in perf_env.cpu.
For now we're using a global perf_env variable, that will have its
contents freed after we run a builtin.
v2: Check perf_env__read_cpu_topology_map() return in
write_cpu_topology() (Kan Liang)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have the tools/lib/ sysfs__read_int() for that, avoid code
duplication.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fqg6vt5ku72pbf54ljg6tmoy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Get msr pmu type when processing pmu_mappings
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-3ngei63gepydwxhvytl2wx89@git.kernel.org
[ Fixed it up wrt moving perf_env from header.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding tools/include into tags directories, to have include definitions
reachable via tags/cscope.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Link: http://lkml.kernel.org/r/1441615087-13886-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have no use for it in evsel.h.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-um03yjrgyi3bj1hzqiqs4dsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we were not setting it to at least 3 chars ('CPU'), it was being
reset to zero when recalculating the columns width when refreshing the
screen, in 'perf top'. Fix it.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqcdnkkqm6sew06x01fbijmy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move this from two globals to perf_env global, that eventually will
be just perf_header->env or something else, to ease the refactoring
series, leave it as a global and go on reading more of its fields,
not as part of the header writing process but as a perf_env init one
that will be used for perf.data-less situations.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2j78tdf8zn1ci0y6ji15bifj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it can be used separately from 'perf_session' and 'perf_header',
move it to separate include file and object, next csets will try to move
a perf_env__init() routine.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ff2rw99tsn670y1b6gxbwdsi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for introducing more arrays of tests, e.g. "arch tests"
(architecture-specific tests), abstract the code to iterate over the
list of tests into a helper function.
This way, code that uses a 'struct test' doesn't need to worry about how
the tests are grouped together and changes to the list of tests doesn't
require changes to the code using it.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Kanaka Juvva <kanaka.d.juvva@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vikas Shivappa <vikas.shivappa@intel.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/1441479742-15402-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch test cpu core_id and socket_id which are stored in perf_env.
Commiter note:
# perf test topo
40: Test topology in session: Ok
# perf test -v topo
40: Test topology in session:
--- start ---
test child forked, pid 31767
templ file: /tmp/perf-test-VTZ1PL
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 0, socket 0
CPU 3, core 1, socket 0
test child finished with 0
---- end ----
Test topology in session: Ok
#
Based-on-a-patch-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441357111-64522-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using tracing_path interface on several places, that more or less
copy the functionality of tracing_path interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switching to the fs.c related filesystem framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
objdump output can contain repeated bytes. At the moment test reads all
output sequentially, assuming each address is represented in output only
once:
ffffffff8164efb3 <retint_swapgs+0x9>:
ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp)
ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4)
ffffffff8164efb8 <restore_c_regs_and_iret>:
ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11
ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10
Store objdump output to buffer according to offset calculated from
address on each line.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/ad13289a55d6350f7717757c7e32c2d4286402bd.1441181335.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles (Andi Kleen)
Infrastructure:
- Add a 'perf test' entry for decoding of new x86 instructions (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf (Adrian Hunter)
- Copy linux/filter.h to tools/include (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings (Jiri Olsa)
- Store CPU socket and core IDs in perf.data (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe' (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uRtf
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Use PERF_RECORD_SWITCH when available in intel-pt, instead of
"sched:sched_switch" events, enabling an unprivileged user to trace
multi-threaded or multi-process workloads. (Adrian Hunter)
- Always use non inlined file name for 'srcfile' sort key. (Andi Kleen)
- Quieten failed to read counter message, helps in systems without
backend-stalled-cycles. (Andi Kleen)
Infrastructure changes:
- Add a 'perf test' entry for decoding of new x86 instructions. (Adrian Hunter)
- Add new instructions (sha, clflushopt, clwb, pcommit, rdpkru, wrpkru, xsavec,
xsaves, xrstors) to the x86 instruction decoder. (Adrian Hunter)
- Add a build test to warn when source code drifts happen for the
instruction decoder files in the kernel and in tools/perf. (Adrian Hunter)
- Copy linux/filter.h to tools/include. (He Kuang)
- Support function __get_dynamic_array_len in libtraceevent. (He Kuanguuu)
- Tracing path finding/mounting/error reporting refactorings. (Jiri Olsa)
- Store CPU socket and core IDs in perf.data. (Kan Liang)
- Reorganize add/del probe insertion routines in 'perf probe'. (Namhyung Kim, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Showing actual trace event when deleteing perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
The output is not changed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The del_perf_probe_events() does 2 things:
1. find existing events which match to filter
2. delete such trace events from kernel
But sometimes we need to do something with the trace events. So split
the funtion into two, so that it can access intermediate trace events
name using strlist if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Showing actual trace event when adding perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
Also it combines the output if more than one event is added.
Before:
$ sudo perf probe -a do_fork -a do_exit
Added new event:
probe:do_fork (on do_fork)
You can now use it in all perf tools, such as:
perf record -e probe:do_fork -aR sleep 1
Added new events:
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
After:
$ sudo perf probe -a do_fork -a do_exit
Added new events:
probe:do_fork (on do_fork)
probe:do_exit (on do_exit)
probe:do_exit_1 (on do_exit)
You can now use it in all perf tools, such as:
perf record -e probe:do_exit_1 -aR sleep 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch drops struct __event_package structure. Instead, it adds a
'struct trace_probe_event' pointer to 'struct perf_probe_event'.
The trace_probe_event information gives further patches a chance to
access actual probe points and actual arguments.
Using them, 'perf probe' can get the whole list of added probes and
print them at once.
Other users like the upcoming bpf_loader will be able to attach one bpf
program to different probing points of an inline function (which has
multiple probing points) and glob functions.
Moreover, by reading the arguments information, bpf code for reading
those arguments can be generated.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-2-git-send-email-namhyung@kernel.org
[namhyung: extract necessary part from the existing patch]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The add_perf_probe_events() does 3 things:
1. convert all perf events to trace events
2. add all trace events to kernel
3. cleanup all trace events
But sometimes we need to do something with the trace events. So split
the funtion into three, so that it can access intermediate trace events
via struct __event_package if needed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for selecting and processing PERF_RECORD_SWITCH events for
use by Intel PT. If they are available, they will be used in preference
to sched_switch events.
This enables an unprivileged user to trace multi-threaded or
multi-process workloads with any level of perf_event_paranoid. However
it depends on kernel support for PERF_RECORD_SWITCH.
Without this patch, tracing a multi-threaded workload will decode
without error but all the data will be attributed to the main thread.
Without this patch, tracing a multi-process workload will result in
decoder errors because the decoder will not know which executable is
executing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439458857-30636-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to check evsel before passing it to dump_sample().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441283463-51050-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add xsavec, xsaves and xrstors to the op code map and the perf tools new
instructions test. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'
For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rdpkru and wrpkru to the op code map and the perf tools new
instructions test. In the case of the test, only the bytes can be
tested at the moment since binutils doesn't support the instructions
yet. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep pkru
For information about rdpkru and wrpkru, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel Architecture Instruction Set Extensions Programing Reference (Oct
2014) describes 3 new memory instructions, namely clflushopt, clwb and
pcommit. Add them to the op code map and the perf tools new
instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel SHA Extensions are explained in the Intel Architecture
Instruction Set Extensions Programing Reference (Oct 2014).
There are 7 new instructions. Add them to the op code map
and the perf tools new instructions test. e.g.
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep sha
Committer note:
3 lines of details, for the curious:
$ perf test -v "x86 ins" 2>&1 | grep sha256msg1 | tail -3
Decoded ok: 0f 38 cc 84 08 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,1),%xmm0
Decoded ok: 0f 38 cc 84 c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm0
Decoded ok: 44 0f 38 cc bc c8 78 56 34 12 sha256msg1 0x12345678(%rax,%rcx,8),%xmm15
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The MPX instructions are presently not described in the SDM
opcode maps, and there are not encoding characters for bnd
registers, address method or operand type. So the kernel
opcode map is using 'Gv' for bnd registers and 'Ev' for
everything else. That is fine because the instruction
decoder does not use that information anyway, except as
an indication that there is a ModR/M byte.
Nevertheless, in some cases the 'Gv' and 'Ev' are the wrong
way around, BNDLDX and BNDSTX have 2 operands not 3, and it
wouldn't hurt to identify the mandatory prefixes.
This has no effect on the decoding of valid instructions,
but the addition of the mandatory prefixes will cause some
invalid instructions to error out that wouldn't have
previously.
Note that perf tools has a copy of the instruction decoder
and provides a test for new instructions which includes MPX
instructions e.g.
$ perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ perf test -v "x86 ins"
Commiter notes:
And to see these MPX instructions specifically:
$ perf test -v "x86 ins" 2>&1 | grep bndldx | head -3
Decoded ok: 0f 1a 00 bndldx (%eax),%bnd0
Decoded ok: 0f 1a 05 78 56 34 12 bndldx 0x12345678,%bnd0
Decoded ok: 0f 1a 18 bndldx (%eax),%bnd3
$ perf test -v "x86 ins" 2>&1 | grep bndstx | head -3
Decoded ok: 0f 1b 00 bndstx %bnd0,(%eax)
Decoded ok: 0f 1b 05 78 56 34 12 bndstx %bnd0,0x12345678
Decoded ok: 0f 1b 18 bndstx %bnd3,(%eax)
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new test titled:
Test x86 instruction decoder - new instructions
The purpose of this test is to check the instruction decoder after new
instructions have been added. Initially, MPX instructions are tested
which are already supported, but the definitions in x86-opcode-map.txt
will be tweaked in a subsequent patch, after which this test can be run
to verify those changes.
The data for the test comes from assembly language instructions in
insn-x86-dat-src.c which is converted into bytes by the scripts
gen-insn-x86-dat.sh and gen-insn-x86-dat.awk, and included into the test
program insn-x86.c as insn-x86-dat-32.c and insn-x86-dat-64.c.
The conversion is not done as part of the perf tools build because the
test data must be under (git) change control in order for the test to be
repeatably-correct. Also it may require a recent version of binutils.
Commiter notes:
Using it:
# perf test decoder
39: Test x86 instruction decoder - new instructions : Ok
# perf test -v decoder
39: Test x86 instruction decoder - new instructions :
--- start ---
test child forked, pid 21970
Decoded ok: 0f 31 rdtsc
Decoded ok: f3 0f 1b 00 bndmk (%eax),%bnd0
Decoded ok: f3 0f 1b 05 78 56 34 12 bndmk 0x12345678,%bnd0
Decoded ok: f3 0f 1b 18 bndmk (%eax),%bnd3
<SNIP>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 402 <main+0x402>
Decoded ok: f2 e9 00 00 00 00 bnd jmpq 408 <main+0x408>
Decoded ok: 67 f2 ff 21 bnd jmpq *(%ecx)
Decoded ok: f2 0f 85 00 00 00 00 bnd jne 413 <main+0x413>
test child finished with 0
---- end ----
Test x86 instruction decoder - new instructions: Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools has a copy of the x86 instruction decoder used by the kernel.
The expectation is that the copy will be kept more-or-less in-synch with
the kernel version. Consequently it is helpful to know if there are
differences.
This patch adds a check into the perf tools build so that a diff is done
on the sources, and a warning is printed if they are different. Note
that the warning is not fatal and the build continues as normal.
The check is done as part of building the instruction decoder, so, like
a compiler warning, it is not seen unless the instruction decoder has to
be re-compiled. e.g.
$ make -C tools/perf >/dev/null
$ echo "/* blah */" >> tools/perf/util/intel-pt-decoder/inat_types.h
$ make -C tools/perf >/dev/null
Warning: Intel PT: x86 instruction decoder differs from kernel
$ make -C tools/perf >/dev/null
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441196131-20632-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving debugfs__strerror_open out of api/fs/debugfs.c, because it's not
debugfs specific. It'll be changed to consider tracefs mount as well in
following patches.
Renaming it into tracing_path__strerror_open_tp to fit into the
namespace. No functional change is intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving tracing_path interface into api/fs/tracing_path.c out of util.c.
It seems generic enough to be used by others, and I couldn't think of
better place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a couple of cases the 'comm' member of 'union event' has been used
instead of the correct member ('fork') when processing exit events.
In the cases where it has been used incorrectly, only the 'pid' and
'tid' are affected. The 'pid' value would be correct anyway because it
is in the same position in 'comm' and 'fork' events, but the 'tid' would
have been incorrectly assigned from 'ppid'.
However, for exit events, the kernel puts the current task in the 'ppid'
and 'ttid' which is the same as the exiting task. That is 'ppid' ==
'pid' and if the task is not multi-threaded, 'pid' == 'tid' i.e. the
data goes wrong only when tracing multi-threaded programs.
It is hard to find an example of how this would produce an error in
practice. There are 3 occurences of the fix:
1. perf script is only affected if !sample_id_all which only happens on
old kernels.
2. intel_pt is only affected when decoding without timestamps
and would probably still decode correctly - the exit event is
only used to flush out data which anyway gets flushed at the
end of the session
3. intel_bts also uses the exit event to flush data which
would probably not cause errors as it would get flushed at
the end of the session instead
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439888825-27708-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming all functions touching tracing_path under same namespace. New
interface is:
char tracing_path[];
- tracing mount path
char tracing_events_path[];
- tracing mount/events path
void tracing_path_set(const char *mountpoint);
- setting directly tracing_path(_events), used by --debugfs-dir option
const char *tracing_path_mount(void);
- initial setup of tracing_(events)_path, called from perf.c
mounts debugfs/tracefs if needed and possible
char *get_tracing_file(const char *name);
void put_tracing_file(char *file);
- get/put tracing file path
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not used by any caller. We either detect the mountpoint or use
hardcoded one.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1441180605-24737-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 3b3eb0445 running perf stat on a system without
backend-stalled-cycles spits out ugly warnings by default.
Since that is quite common, make the message a debug message only.
We know anyways that the counter wasn't read by the normal <unsupported>
output.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441147966-14917-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch stores the cpu socket_id and core_id in a perf.data header,
and reads them into the perf_env struct when processing perf.data files.
The changes modifies the CPU_TOPOLOGY section, making sure it is
backward/forward compatible.
The patch checks the section size before reading the core and socket ids.
It never reads data crossing the section boundary. An old perf binary
without this patch can also correctly read the perf.data from a new perf
with this patch.
Because the new info is added at the end of the cpu_topology section, an
old perf tool ignores the extra data.
Examples:
1. New perf with this patch read perf.data from an old perf without the
patch:
$ perf_new report -i perf_old.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# Core ID and Socket ID information is not available
# node0 meminfo : total = 32823872 kB, free = 29315548 kB
# node0 cpu list : 0-17,36-53
......
2. Old perf without the patch reads perf.data from a new perf with the
patch:
$ perf_old report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
......
3. New perf read new perf.data:
$ perf_new report -i perf_new.data --header-only -I
......
# sibling threads : 33
# sibling threads : 34
# sibling threads : 35
# CPU 0: Core ID 0, Socket ID 0
# CPU 1: Core ID 1, Socket ID 0
......
# CPU 61: Core ID 10, Socket ID 1
# CPU 62: Core ID 11, Socket ID 1
# CPU 63: Core ID 16, Socket ID 1
# node0 meminfo : total = 32823872 kB, free = 29190932 kB
# node0 cpu list : 0-17,36-53
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch moves the code which reads core_id and socket_id into
separate functions.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441115893-22006-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support helper function __get_dynamic_array_len() in libtraceevent, this
function is used accompany with __print_array() or __print_hex(), but
currently it is not an available function in the function list of
process_function().
The total allocated length of the dynamic array is embedded in the top
half of __data_loc_##item field. This patch adds new arg type
PRINT_DYNAMIC_ARRAY_LEN to return the length to eval_num_arg(),
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-32-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch copies filter.h from include/linux/kernel.h to
tools/include/linux/filter.h to enable other libraries to use macros in it,
like libbpf which will be introduced by further patches.
Currently, the filter.h copy only contains the useful macros needed by
libbpf for not introducing too much dependence.
tools/perf/MANIFEST is also updated for 'make perf-*-src-pkg'.
One change:
The 'imm' field of BPF_EMIT_CALL becomes ((FUNC) - BPF_FUNC_unspec) to
suit user space code generator.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440822125-52691-22-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ Removed stylistic changes, so that a diff to the original file gets reduced ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When profiling the kernel with the 'srcfile' sort key it's common to
"get stuck" in include. For example a lot of code uses current or other
inlines, so they get accounted to some random include file. This is not
very useful as a high level categorization.
For example just profiling the idle loop usually shows mostly inlines,
so you never see the actual cpuidle file.
This patch changes the 'srcfile' sort key to always unwind the inline
stack using BFD/DWARF. So we always account to the base function that
called the inline.
In a few cases include is still shown (for example for MSR accesses),
but that is because they get inlining expanded as part of assigning to a
global function pointer. For the majority it works fine though.
v2: Use simpler while loop. Add maximum iteration count.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1441133239-31254-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit changed parse_events_add_pmu interface:
36adec85a8 perf tools: Change parse_events_add_pmu interface
but forgot to change one caller. Because of lessen compilation rules for
the bison parser, the compiler did not warn on that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 36adec85a8 ("perf tools: Change parse_events_add_pmu interface")
Link: http://lkml.kernel.org/r/1441180605-24737-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch makes perf compile on non x86 platforms by defining a weak
symbol for sample_reg_masks[] in util/perf_regs.c.
The patch also moves the REG() and REG_END() macros into the
util/per_regs.h header file. The macros are renamed to
SMPL_REG/SMPL_REG_END to avoid clashes with other header files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441099814-26783-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I hit following building error randomly:
...
/bin/sh: /path/to/kernel/buildperf/util/intel-pt-decoder/inat-tables.c: No such file or directory
...
LINK /path/to/kernel/buildperf/plugin_mac80211.so
LINK /path/to/kernel/buildperf/plugin_kmem.so
LINK /path/to/kernel/buildperf/plugin_xen.so
LINK /path/to/kernel/buildperf/plugin_hrtimer.so
In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:25:0:
util/intel-pt-decoder/inat.c:24:25: fatal error: inat-tables.c: No such file or directory
#include "inat-tables.c"
^
compilation terminated.
make[4]: *** [/path/to/kernel/buildperf/util/intel-pt-decoder/intel-pt-insn-decoder.o] Error 1
make[4]: *** Waiting for unfinished jobs....
LINK /path/to/kernel/buildperf/plugin_function.so
This is caused by tools/perf/util/intel-pt-decoder/Build that, it tries
to generate $(OUTPUT)util/intel-pt-decoder/inat-tables.c atomatically
but forget to ensure the existance of $(OUTPUT)util/intel-pt-decoder
directory.
This patch fixes it by adding $(call rule_mkdir) like other similar rules.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441087005-107540-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a problem in the dwarf-regs.c files for sh, sparc and x86 where
it is possible to make an out-of-bounds array access when searching for
register names.
This patch fixes it by replacing '<=' to '<', so when register (number
== XXX_MAX_REGS), get_arch_regstr() will return NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@huawei.com
Link: http://lkml.kernel.org/r/1441078184-105038-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.
The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.
With no parameter, the --intr-regs still records all possible registers
based on the architecture.
To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:
$ perf record --intr-regs=si,di,r8,r9 .....
To record any possible registers:
$ perf record -I .....
$ perf report --intr-regs ...
To display the register, one can use perf report -D
To list the available registers:
$ perf record --intr-regs=\?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a way to locate a register identifier (PERF_X86_REG_*)
based on its name, e.g., AX.
This will be used by a subsequent patch to improved flexibility of perf
record.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the output of the interrupted machine state (iregs) to
perf script. It presents them as NAME:VALUE so this is easy to parse
during post processing.
To capture the interrupted machine state:
$ perf record -I ....
to display iregs, use the -F option:
$ perf script -F ip,iregs
40afc2 AX:0x6c5770 BX:0x1e CX:0x5f4d80a DX:0x101010101010101 SI:0x1
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An evsel may have different cpus and threads than the evlist it is in.
Use it's own cpus and threads, when opening the evsel in 'perf record'.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440138194-17001-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch there's no way to connect a loaded bpf object
to its source file. However, during applying perf's '--filter' to BPF
object, without this connection makes things harder, because perf loads
all programs together, but '--filter' setting is for each object.
The API of bpf_object__open_buffer() is changed to allow passing a name.
Fortunately, at this time there's only one user of it (perf test LLVM),
so we change it together.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440742821-44548-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is theoretically possible to process perf.data files created on x86
and that contain Intel PT or Intel BTS data, on any other architecture,
which is why it is possible for there to be build errors on powerpc
caused by pt/bts.
The errors were:
util/intel-pt-decoder/intel-pt-insn-decoder.c: In function ‘intel_pt_insn_decoder’:
util/intel-pt-decoder/intel-pt-insn-decoder.c:138:3: error: switch missing default case [-Werror=switch-default]
switch (insn->immediate.nbytes) {
^
cc1: all warnings being treated as errors
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_synth_branch_sample':
sources/linux-acme.git/tools/perf/util/intel-pt.c:871: undefined reference to `tsc_to_perf_time'
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_sample':
sources/linux-acme.git/tools/perf/util/intel-pt.c:915: undefined reference to `tsc_to_perf_time'
sources/linux-acme.git/tools/perf/util/intel-pt.c:962: undefined reference to `tsc_to_perf_time'
linux-acme.git/tools/perf/perf-obj/libperf.a(libperf-in.o): In function `intel_pt_process_event':
sources/linux-acme.git/tools/perf/util/intel-pt.c:1454: undefined reference to `perf_time_to_tsc'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441046384-28663-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Add new compaction-times python script (Tony Jones)
- Make the --[no-]-demangle/--[no-]-demangle-kernel command line
options available in 'perf script' too (Mark Drayton)
- Allow for negative numbers in libtraceevent's print format,
fixing up misformatting in some tracepoints (Steven Rostedt)
Infrastructure:
- perf_env/perf_evlist changes to allow accessing the data
structure with the environment where some perf data was
collected in functions not necessarily related to perf.data
file processing (Kan Liang)
- Cleanups for the tracepoint definition location paths routines (Jiri Olsa)
- Introduce sysfs/filename__sprintf_build_id, removing code
duplication (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9AFe
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvement and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add new compaction-times python script. (Tony Jones)
- Make the --[no-]-demangle/--[no-]-demangle-kernel command line
options available in 'perf script' too. (Mark Drayton)
- Allow for negative numbers in libtraceevent's print format,
fixing up misformatting in some tracepoints. (Steven Rostedt)
Infrastructure changes:
- perf_env/perf_evlist changes to allow accessing the data
structure with the environment where some perf data was
collected in functions not necessarily related to perf.data
file processing. (Kan Liang)
- Cleanups for the tracepoint definition location paths routines. (Jiri Olsa)
- Introduce sysfs/filename__sprintf_build_id, removing code
duplication. (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add backpointer to perf_env in evlist, so we can easily access env when
processing something where we have a evsel or evlist.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not necessarily tied to a perf.data file and needs using in
places where a perf_session is not required.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracing_events_path is the variable we want to change via
--debugfs-dir option, not the debugfs_mountpoint.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for find_tracing_dir, because perf already searches for
debugfs/tracefs mount on start and populate tracing_events_path.
Adding tracing_path to carry tracing dir string to be used in
get_tracing_file instead of calling find_tracing_dir.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Raphael Beamonte <raphael.beamonte@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1440596813-12844-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that functions that deal primarily with an evsel to access
information that concerns the whole evlist it is in.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440677263-21954-5-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates a new script (compaction-times) to report time
spent in mm compaction. It is possible to report times in nanoseconds
(default) or microseconds (-u).
The option -p will break down results by process id, -pv will further
decompose by each compaction entry/exit.
For each compaction entry/exit what is reported is controlled by the
options:
-t report only timing
-m report migration stats
-ms report migration scanner stats
-fs report free scanner stats
The default is to report all.
Entries may be further filtered by pid, pid-range or comm (regex).
The script is useful when analysing workloads that compact memory. The
most common example will be THP allocations on systems with a lot of
uptime that has fragmented memory.
This is an example of using the script to analyse a thpscale from
mmtests which deliberately fragments memory and allocates THP in 4
separate threads
# Recording step, one of the following;
$ perf record -e 'compaction:mm_compaction_*' ./workload
# or:
$ perf script record compaction-times
# Reporting: basic
total: 2444505743ns migration: moved=357738 failed=39275
free_scanner: scanned=2705578 isolated=387875
migration_scanner: scanned=414426 isolated=397013
# Reporting: Per task stall times
$ perf script report compaction-times -- -t -p
total: 2444505743ns
6384[thpscale]: 740800017ns
6385[thpscale]: 274119512ns
6386[thpscale]: 832961337ns
6383[thpscale]: 596624877ns
# Reporting: Per-compaction attempts for task 6385
$ perf script report compaction-times -- -m -pv 6385
total: 274119512ns migration: moved=14893 failed=24285
6385[thpscale]: 274119512ns migration: moved=14893 failed=24285
6385[thpscale].1: 3033277ns migration: moved=511 failed=1
6385[thpscale].2: 9592094ns migration: moved=1524 failed=12
6385[thpscale].3: 2495587ns migration: moved=512 failed=0
6385[thpscale].4: 2561766ns migration: moved=512 failed=0
6385[thpscale].5: 2523521ns migration: moved=512 failed=0
..... output continues ...
Changes since v1:
- report stats for isolate_migratepages and isolate_freepages
(Vlastimil Babka)
- refactor code to achieve above
- add help text
- output to stdout/stderr explicitly
Signed-off-by: Tony Jones <tonyj@suse.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1439840932-8933-1-git-send-email-tonyj@suse.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
print_aggr() fails to print per-core/per-socket statistics after commit
582ec0829b ("perf stat: Fix per-socket output bug for uncore events")
if events have differnt cpus. Because in print_aggr(), aggr_get_id needs
index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be
used to get aggregated id.
Here is an example:
Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has
cpumask 0,18)
$ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2
Without this patch, it failes to get CPU 18 result.
Performance counter stats for 'CPU(s) 0,18':
S0-C0 1 7526851 cycles
S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/
S1-C0 0 <not counted> cycles
S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/
With this patch, it can get both CPU0 and CPU18 result.
Performance counter stats for 'CPU(s) 0,18':
S0-C0 1 6327768 cycles
S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/
S1-C0 1 330228 cycles
S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 582ec0829b ("perf stat: Fix per-socket output bug for uncore events")
Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes when post-processing output from `perf script` one does not
want to demangle C++ symbol names. Add an option to allow this.
Also add --[no-]demangle-kernel to be consistent with top/report/probe.
Signed-off-by: Mark Drayton <mbd@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1440616695-32340-1-git-send-email-scientist@fb.com
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should be useful to allow 'perf probe' probe at absolute offset of a
target. For example, when (u)probing at a instruction of a shared object
in a embedded system where debuginfo is not avaliable but we know the
offset of that instruction by manually digging.
This patch enables following perf probe command syntax:
# perf probe 0xffffffff811e6615
And
# perf probe /lib/x86_64-linux-gnu/libc-2.19.so 0xeb860
In the above example, we don't need a anchor symbol, so it is possible
to compute absolute addresses using other methods and then use 'perf
probe' to create the probing points.
v1 -> v2:
Drop the leading '+' in cmdline;
Allow uprobing at offset 0x0;
Improve 'perf probe -l' result when uprobe at area without debuginfo.
v2 -> v3:
Split bugfix to a separated patch.
Test result:
# perf probe 0xffffffff8119d175 %ax
# perf probe sys_write %ax
# perf probe /lib64/libc-2.18.so 0x0 %ax
# perf probe /lib64/libc-2.18.so 0x5 %ax
# perf probe /lib64/libc-2.18.so 0xd8e40 %ax
# perf probe /lib64/libc-2.18.so __write %ax
# perf probe /lib64/libc-2.18.so 0xd8e49 %ax
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_0 /lib64/libc-2.18.so:0x (null) arg1=%ax
p:probe_libc/abs_5 /lib64/libc-2.18.so:0x0000000000000005 arg1=%ax
p:probe_libc/abs_d8e40 /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
p:probe_libc/__write /lib64/libc-2.18.so:0x00000000000d8e40 arg1=%ax
p:probe_libc/abs_d8e49 /lib64/libc-2.18.so:0x00000000000d8e49 arg1=%ax
# cat /sys/kernel/debug/tracing/kprobe_events
p:probe/abs_ffffffff8119d175 0xffffffff8119d175 arg1=%ax
p:probe/sys_write _text+1692016 arg1=%ax
# perf probe -l
Failed to find debug information for address 5
probe:abs_ffffffff8119d175 (on sys_write+5 with arg1)
probe:sys_write (on sys_write with arg1)
probe_libc:__write (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_0 (on 0x0 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_5 (on 0x5 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_d8e40 (on @unix/syscall-template.S:81 in /lib64/libc-2.18.so with arg1)
probe_libc:abs_d8e49 (on __GI___libc_write+9 in /lib64/libc-2.18.so with arg1)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a bug that, when offset is provided but function is
lost, parse_perf_probe_point() will give a "" string as function name,
so the checking code at the end of parse_perf_probe_point() become
useless. For example:
# perf probe +0x1234
Failed to find symbol in kernel
Error: Failed to add events.
After this patch:
# perf probe +0x1234
Semantic error :Offset requires an entry function.
Error: Command Parse Error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When manually added uprobe point with zero address, 'perf probe -l'
reports error. For example:
# echo p:probe_libc/abs_0 /path/to/lib.bin:0x0 arg1=%ax > \
/sys/kernel/debug/tracing/uprobe_events
# perf probe -l
Error: Failed to show event list.
Probing at 0x0 is possible and useful when lib.bin is not a normal
shared object but is manually mapped. However, in this case kernel
report:
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_0 /path/to/lib.bin:0x (null) arg1=%ax
This patch supports the above kernel output.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe -l' reports error if it is unable find symbol through
address. Here is an example.
# echo 'p:probe_libc/abs_5 /lib64/libc.so.6:0x5' >
/sys/kernel/debug/tracing/uprobe_events
# cat /sys/kernel/debug/tracing/uprobe_events
p:probe_libc/abs_5 /lib64/libc.so.6:0x0000000000000005
# perf probe -l
Error: Failed to show event list
Also, this situation triggers a logical inconsistency in
convert_to_perf_probe_point() that, it returns ENOMEM but actually it
never try strdup().
This patch removes !tp->module && !is_kprobe condition, so it always
uses address to build function name if symbol not found.
Test result:
# perf probe -l
probe_libc:abs_5 (on 0x5 in /lib64/libc.so.6)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440586666-235233-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't carry an export.h wrapper anymore, remove it from the MANIFEST
file to avoid breaking the make perf-tar targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826080750.GD22670@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe -l' panic if there is a manually inserted probing point with
absolute address. For example:
# echo 'p:probe/abs_ffffffff811e6615 0xffffffff811e6615' > /sys/kernel/debug/tracing/kprobe_events
# perf probe -l
Segmentation fault (core dumped)
This patch fix this problem by considering the situation that
"tp->symbol == NULL" in find_perf_probe_point_from_dwarf() and
find_perf_probe_point_from_map().
After this patch:
# perf probe -l
probe:abs_ffffffff811e6615 (on SyS_write+5@fs/read_write.c)
And when debug info is missing:
# rm -rf ~/.debug
# mv /lib/modules/4.2.0-rc1+/build/vmlinux /lib/modules/4.2.0-rc1+/build/vmlinux.bak
# perf probe -l
probe:abs_ffffffff811e6615 (on sys_write+5)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440509256-193590-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A TRACESTOP packet is produced when an Intel PT trace enters a defined
region of the address space at which point the tracing stops.
This patch just adds decoder support.
Support for specifying TRACESTOP regions is left until later.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-25-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CYC packets are a new Intel PT feature.
CYC packets provide even finer grain timestamp information than MTC and
TSC packets. A CYC packet contains the number of CPU cycles since the
last CYC packet. Unlike MTC and TSC packets, CYC packets are only sent
when another packet is also sent.
Support for this feature is indicated by:
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc
which contains "1" if the feature is supported and "0" otherwise.
CYC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/cyc/u sleep 1
The frequency of CYC packets can also be specified. e.g. perf record -e
intel_pt/cyc,cyc_thresh=2/u sleep 1
CYC packets are not requested by default.
Valid cyc_thresh values are given by:
/sys/bus/event_source/devices/intel_pt/caps/cycle_thresholds
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value represents the minimum number of CPU cycles that must have
passed before a CYC packet can be sent. The number of CPU cycles is:
2 ^ (value - 1)
e.g. value 4 means 8 CPU cycles must pass before a CYC packet can be
sent. Note a CYC packet is still only sent when another packet is sent,
not at, e.g. every 8 CPU cycles.
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/cyc,cyc_thresh=15/u uname
Invalid cyc_thresh for intel_pt. Valid values are: 0-12
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-24-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CYC packets provide even finer grain timestamp information than MTC and
TSC packets. A CYC packet contains the number of CPU cycles since the
last CYC packet.
This patch just adds decoder support. The CPU frequency can be related
to TSC using the Maximum Non-Turbo Ratio in combination with the CBR
(core-to-bus ratio) packet. However more accuracy is achieved by simply
interpolating the number of cycles between other timing packets like MTC
or TSC. This patch takes the latter approach.
Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-23-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MTC packets are a new Intel PT feature.
MTC packets provide finer grain timestamp information than TSC packets.
Support for this feature is indicated by:
/sys/bus/event_source/devices/intel_pt/caps/mtc
which contains "1" if the feature is supported and "0" otherwise.
MTC packets can be requested using a PMU config term e.g. perf record -e
intel_pt/mtc/u sleep 1
The frequency of MTC packets can also be specified. e.g. perf record -e
intel_pt/mtc,mtc_period=2/u sleep 1
The default value is 3 or the nearest lower value that is supported. 0
is always supported.
Valid values are given by:
/sys/bus/event_source/devices/intel_pt/caps/mtc_periods
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value is converted to the MTC frequency as:
CTC-frequency / (2 ^ value)
e.g. value 3 means one eighth of CTC-frequency
Where CTC is the hardware crystal clock, the frequency of which can be
related to TSC via values provided in cpuid leaf 0x15.
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/mtc_period=15/u uname
Invalid mtc_period for intel_pt. Valid values are: 0,3,6,9
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
MTC packets provide finer grain timestamp information than TSC packets.
MTC packets record time using the hardware crystal clock (CTC) which is
related to TSC packets using a TMA packet.
This patch just adds decoder support.
Support for a default value and validation of values is provided by a
later patch. Also documentation is updated in a separate patch.
For details refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-21-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record additional information in the AUXTRACE_INFO event in preparation
for decoding MTC and CYC packets. Pass the information to the decoder.
The AUXTRACE_INFO record can be extended by using the size to indicate
the presence of new members.
The additional information includes PMU config bit positions and the TSC
to CTC (hardware crystal clock) ratio needed to decode MTC packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-20-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features have been added to Intel PT which include a number of new
packet definitions.
This patch adds packet definitions for new packets: TMA, MTC, CYC, VMCS,
TRACESTOP and MNT. Also another bit in PIP is defined.
This patch only adds support for the definitions. Later patches add
support for decoding TMA, MTC, CYC and TRACESTOP which is where those
packets are explained.
VMCS and the newly defined bit in PIP are used with virtualization which
is not supported yet. MNT is a maintenance packet which the decoder
should ignore.
For details, refer to the June 2015 or later Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-19-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PSB packet is a synchronization packet that provides a starting
point for decoding or recovery from errors.
This patch adds support for a new Intel PT feature that allows the
frequency of PSB packets to be specified.
Support for this feature is indicated by
/sys/bus/event_source/devices/intel_pt/caps/psb_cyc which contains "1"
if the feature is supported and "0" otherwise.
The PSB period can be specified as a PMU config term e.g. perf record -e
intel_pt/psb_period=2/u sleep 1
The default value is 3 or the nearest lower value that is supported. 0
is always supported.
Valid values are given by:
/sys/bus/event_source/devices/intel_pt/caps/psb_periods
which contains a hexadecimal value, the bits of which represent valid
values e.g. bit 2 set means value 2 is valid.
The value is converted to the approximate number of trace bytes between
PSB packets as:
2 ^ (value + 11)
e.g. value 3 means 16KiB bytes between PSBs
If an invalid value is entered, the error message will give a list of
valid values e.g.
$ perf record -e intel_pt/psb_period=15/u uname
Invalid psb_period for intel_pt. Valid values are: 0-5
tools/perf/Documentation/intel-pt.txt is updated in a later patch as
there are a number of new features being added.
For more information about PSB periods refer to the Intel 64 and IA-32
Architectures SDM Chapter 36 Intel Processor Trace from June 2015 or
later.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The period on synthesized 'instructions' samples was being set to a
fixed value, whereas the correct value is the number of instructions
since the last sample, which is a value that the decoder can provide.
So do it that way.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were depending on the next screen operation after a flush() being
one that would redraw the whole screen so that the progress bar would
be overwritten, when that didn't happen a screen artifact of, say, a
error dialog window would be overlaid on top of the progress bar, fix
it by calling ui_browser__finish(), that now has a TUI implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-el0fyw6duemnx62lydjzhs8c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can erase the progress bar after we're done with it, avoiding
things like:
-------------------------------------------------------------------
┌─Error:──────────────────────────────────────────────────────┐
│Can't annotate unmapped_area_topdown: │
│ │
│No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
│was found in the path. │
│ │
│Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│ │──┐
│ │Please use: │ │
└─────────│ │──┘
│ perf buildid-cache -vu vmlinux │
│ │
│or: │
│ │
│ --vmlinux vmlinux │
│ │
│ │
│Press any key... │
└─────────────────────────────────────────────────────────────┘
Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------
I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'annotate' tool does some filtering in the entries in a DSO but
forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV:
[root@zoo ~]# perf annotate netlink_poll
perf: Segmentation fault
-------- backtrace --------
perf[0x526ceb]
/lib64/libc.so.6(+0x34960)[0x7faedfbe0960]
perf(rb_erase+0x223)[0x499d63]
perf[0x4213e9]
perf[0x4bc123]
perf[0x4bc621]
perf[0x4bf26b]
perf[0x4bc855]
perf(perf_session__process_events+0x340)[0x4bddc0]
perf(cmd_annotate+0x6bb)[0x421b5b]
perf[0x479063]
perf(main+0x60a)[0x42098a]
/lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0]
perf[0x420aa9]
[0x0]
[root@zoo ~]#
Fix it by reseting the find cache when removing symbols.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: b685ac22b4 ("perf symbols: Add front end cache for DSO symbol lookup")
Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix some include paths and add missing inat_types.h.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/55D77696.60102@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A problem can occur in a statically linked perf when vmlinux can be found:
# perf probe --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Error: Failed to add events. Reason: No such file or directory (Code: -2)
The reason is caused by libdw that, if libdw is statically linked, it
can't load libebl_{arch}.so reliable.
In this case it is still possible to get the address from
/proc/kalksyms. However, perf tries that only when libdw returns
-EBADF.
This patch gives it another chance to utilize symbol table, even if
libdw returns an error code other than -EBADF.
After applying this patch:
# perf probe -nv --add sys_epoll_pwait
probe-definition(0): sys_epoll_pwait
symbol:sys_epoll_pwait file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.2.0-rc1+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.2.0-rc1+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_epoll_pwait address found : ffffffff8122bd40
Matched function: SyS_epoll_pwait
Failed to get call frame on 0xffffffff8122bd40
An error occurred in debuginfo analysis (-2).
Trying to use symbols.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Added new event:
Writing event: p:probe/sys_epoll_pwait _text+2276672
probe:sys_epoll_pwait (on sys_epoll_pwait)
You can now use it in all perf tools, such as:
perf record -e probe:sys_epoll_pwait -aR sleep 1
Although libdw returns an error (Failed to get call frame), perf tries
symbol table and finally gets correct address.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1440151770-129878-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Map clone was written before we introduced reference counts for
maps and dsos, so all that was needed was just a copy and then we
would insert it into the new map_groups instance.
Fix it by, after copying, initializing the map->refcnt, grabbing
a struct dso refcount and resetting pointers that may be used
to determine if a map, when deleted, is in a rb_tree.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pd4mr80o5b9gvk50iineacec@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to produce a call-graph from data exported to a postgresql
database and derived from a processor trace event like intel_pt or intel_bts.
Refer to comments in the scripts call-graph-from-postgresql.py and
export-to-postgresql.py for more details on how to set up the environment,
install the required packages, etc.
Committer note:
From the scripts, for convenience while reading 'git log':
An example of using this script with Intel PT:
$ perf record -e intel_pt//u ls
$ perf script -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py pt_example branches calls
2015-05-29 12:49:23.464364 Creating database...
2015-05-29 12:49:26.281717 Writing to intermediate files...
2015-05-29 12:49:27.190383 Copying to database...
2015-05-29 12:49:28.140451 Removing intermediate files...
2015-05-29 12:49:28.147451 Adding primary keys
2015-05-29 12:49:28.655683 Adding foreign keys
2015-05-29 12:49:29.365350 Done
$ python tools/perf/scripts/python/call-graph-from-postgresql.py pt_example
# The result is a GUI window with a tree representing a context-sensitive
# call-graph. Expanding a couple of levels of the tree and adjusting column
# widths to suit will display something like:
Call Graph: pt_example
Call Path |Object |Count|Time(ns)|Time(%)|Branch Count|Branch Count(%)
v- ls
v- 2638:2638
v- _start ld-2.19.so 1 10074071 100.0 211135 100.0
|- unknown unknown 1 13198 0.1 1 0.0
>- _dl_start ld-2.19.so 1 1400980 13.9 19637 9.3
>- _d_linit_internal ld-2.19.so 1 448152 4.4 11094 5.3
v-__libc_start_main@plt ls 1 8211741 81.5 180397 85.4
>- _dl_fixup ld-2.19.so 1 7607 0.1 108 0.1
>- __cxa_atexit libc-2.19.so 1 11737 0.1 10 0.0
>- __libc_csu_init ls 1 10354 0.1 10 0.0
|- _setjmp libc-2.19.so 1 0 0.0 4 0.0
v- main ls 1 8182043 99.6 180254 99.9
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-11-git-send-email-adrian.hunter@intel.com
[ Added 'python-pyside qt-postgresql' to the yum cmdline installing required packages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script, report and inject all have the same itrace options. Put
them into an asciidoc include file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events that don't sample the timestamp have a timestamp value of -1.
Intel PT processing wasn't taking that into account.
This is particularly noticeable with Intel BTS because timestamps are
not requested by default.
Then, if the conversion of -1 to TSC results in a small number, the
processing is unaffected.
However if the conversion results in a big number, then the data is
processed prematurely before relevant sideband data like mmap events,
which in turn results in samples with unknown dsos.
Commiter note:
Since BTS wasn't upstream, I split the patch to fold the BTS part with
the patch introducing it, to avoid having this bug in the commit
history. PT was already upstream, so this patch contains that part.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440060692-5585-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "/proc/kcore requires CAP_SYS_RAWIO" message comes up all the time
for 'perf script' if vmlinux is not found and the user isn't root, even
when the kernel is not being traced and even though the message is only
really relevant for annotation.
Change it to pr_debug and instead put a note in the message displayed if
annotation is not possible.
Also, the file being accessed might not be /proc/kcore. Tools can be
directed to a different location using the --kallsyms option in which
case kcore is expected to be in the same directory. Adjust the message
so it is not misleading in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1440065260-8802-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Patch "perf script: Don't assume evsel position of tracking events"
changed 'perf script' to use 'perf_evlist__id2evsel()'. That results
in a segfault if there is more than 1 event and there are
synthesized mmap events e.g.
$ perf record -e cycles,instructions -p$$ sleep 1
$ perf script --show-mmap-events
Segmentation fault (core dumped)
That happens because these synthesized events have an 'id' of zero
which does not match any 'evsel'.
Currently, these synthesized events use the sample type of the first
evsel.
Change 'perf_evlist__id2evsel()' to reflect that which also makes
it consistent with 'perf_evlist__event2evsel()'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 06b234ec26 ("perf script: Don't assume evsel position of tracking events")
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1440059205-1765-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was just freezing instead of informing about the SEGV, fix it and
also print a backtrace, just like in the TUI mode and in 'perf trace'.
Tested by provoking a NULL deref when pressing 'z':
0.31% libc-2.20.so [.] malloc_consolidate
0.31% ld-2.20.so [.] _dl_relocate_object
0.28% cc1 [.] ht_lookup
0.28% cc1 [.] ira_init_register_move_cost
perf: Segmentation fault
Obtained 7 stack frames.
perf(dump_stack+0x32) [0x4d69f2]
perf(sighandler_dump_stack+0x29) [0x4d6a89]
/lib64/libc.so.6(+0x34960) [0x7f5064333960]
perf() [0x438790]
/lib64/libpthread.so.0(+0x752a) [0x7f50663dd52a]
/lib64/libc.so.6(clone+0x6d) [0x7f50643ff22d]
#
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pewrpzqd29rgmhu2wkk7fhww@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After recording, 'perf record' post-processes the data to determine
which buildids are needed.
That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing a fork event, the tools lookup the parent thread by its
tid. In a couple of cases, it is possible for that thread to have the
wrong pid.
That can happen if the data is being processed out of order, or if the
(fork) event that would have removed the erroneous thread was lost.
Assume the latter case, print a dump message, remove the erroneous
thread, create a new one with the correct pid, and keep going.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Attempting to clone map groups onto themselves will deadlock.
It only happens because of other bugs, but the code should protect
itself anyway.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for Intel Processor Trace.
Intel PT support fits within the new auxtrace infrastructure. Recording
is supporting by identifying the Intel PT PMU, parsing options and
setting up events.
Decoding is supported by queuing up trace data by cpu or thread and then
decoding synchronously delivering synthesized event samples into the
session processing for tools to consume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding an Intel Processor Trace.
Intel PT trace data must be 'decoded' which involves walking the object
code and matching the trace data packets.
The decoder requests a buffer of binary data via a get_trace()
call-back, which it decodes using instruction information which it gets
via another call-back walk_insn().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a facility to log Intel Processor Trace decoding. The log is
intended for debugging purposes only.
The log file name is "intel_pt.log" and is opened in the current
directory. The log contains a record of all packets and instructions
decoded and can get very large (10 MB would be a small one).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding instructions for Intel Processor Trace. The
kernel x86 instruction decoder is copied for this.
This essentially provides intel_pt_get_insn() which takes a binary
buffer, uses the kernel's x86 instruction decoder to get details of the
instruction and then categorizes it for consumption by an Intel PT
decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding Intel Processor Trace packets.
This essentially provides intel_pt_get_packet() which takes a buffer of
binary data and returns the decoded packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the Intel Processor Trace type constant PERF_AUXTRACE_INTEL_PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels attempt to prelink vdso to its virtual address. To permit
annotation using objdump, the map__rip_2objdump() calculation must
result in that same address which we can infer from the start and offset
of the text section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1439556606-11297-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following 32-bit compilation errors:
util/annotate.c: In function ‘addr_map_symbol__account_cycles’:
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=]
pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n",
^
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=]
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=]
These were introduced by the patch:
"perf report: Add infrastructure for a cycles histogram"
Also change the 'saddr' variable from 'unsigned long' to 'u64'
noting that theoretically we could be processing data captured
on a 64-bit machine but processing it on a 32-bit machine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: d4957633bf ("perf report: Add infrastructure for a cycles histogram")
Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff reported non functional DWARF unwind under perf script. The
reason is that perf script does not properly configure
callchain_param.record_mode, which is needed by unwind code.
Stealing the code from report and leaving the place for more
initialization code in a hope we could merge it with
report__setup_sample_type one day.
Reported-by: Milian Wolff <mail@milianw.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150813071724.GA21322@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were storing the vfs_getname payload (i.e. ptr->string) into
the trace wide storage area (struct trace), so that we could use the
last payload when setting up the fd->pathname per thread tables, oops,
not a good idea for multi cpu tracing sessions...
Fix it by moving it to the per thread area (struct thread_trace).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3j05ttqyaem7kh7oubvr1keo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 75186a9b09 (perf probe: Fix to show lines of sys_ functions
correctly) introduced a bug by a missed brace around if block. This
fixes to add it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 75186a9b09 ("perf probe: Fix to show lines of sys_ functions correctly")
Link: http://lkml.kernel.org/r/20150812215541.9088.62425.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.
v2: Explicitly check for static linking and only add the dependencies
when -static is set. This is to avoid regressions on Arnaldo's system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests in tests/parse-events.c to check call-graph and time option.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf probe --lines sys_poll" shows only the first line of sys_poll,
because the SYSCALL_DEFINE macro:
----
SYSCALL_DEFINE*(foo,...)
{
body;
}
----
is expanded as below (on debuginfo)
----
static inline int SYSC_foo(...)
{
body;
}
int SyS_foo(...) <- is an alias of sys_foo.
{
return SYSC_foo(...);
}
----
So, "perf probe --lines sys_foo" decodes SyS_foo function and it also skips
inlined functions(SYSC_foo) inside the target function because those functions
are usually defined somewhere else.
To fix this issue, this fix checks whether the inlined function is defined at
the same point of the target function, and if so, it doesn't skip the inline
function.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150812012406.11811.94691.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to <-, that may be repurposed for horizontal scrolling.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
But we really should have something like 'strace -yy' here...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyrt1ypfq68u4ljagyk2nj1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the SRCLINE_UNKNOWN case correctly when processing "srcfile".
Commiter note:
We can't just free it, as it was't allocated via malloc, its a guard
variable.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20150811133655.GC4524@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This time using 'trinity' to test these:
fchmodat, futimesat, llistxattr, lremovexattr, lstat, mknodat,
mq_unlink, stat and vmsplice.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1uqu249nwwh0ixrhm80k4a4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf evlist -F shows the number as if it's always sampling
frequency. But we now support per-event freq/period settings. So it'd
better to show more detailed info whether it's freq or period.
$ perf record -e 'cpu/config=1/,cpu/config=2,period=300000/' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
$ perf evlist -F
cpu/config=1/: sample_freq=4000
cpu/config=2,period=300000/: sample_period=300000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf can set per-event value of time and (sampling) period. But I
guess most users like me just want to set frequency rather than period.
So add the 'freq' term in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases it's useful to characterize samples by file. This is
useful to get a higher level categorization, for example to map cost to
subsystems.
Add a srcfile sort key to perf report. It builds on top of the existing
srcline support.
Commiter notes:
E.g.:
# perf record -F 10000 usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ]
[root@zoo ~]# perf report -s srcfile --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File
# ........ ...........
60.99% .
20.62% paravirt.h
14.23% rmap.c
4.04% signal.c
0.11% msr.h
#
The first line is collecting all the files for which srcfiles couldn't somehow
get resolved to:
# perf report -s srcfile,dso --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File Shared Object
# ........ ........... ................
40.97% . ld-2.20.so
20.62% paravirt.h [kernel.vmlinux]
20.02% . libc-2.20.so
14.23% rmap.c [kernel.vmlinux]
4.04% signal.c [kernel.vmlinux]
0.11% msr.h [kernel.vmlinux]
#
XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't
seen this on Fedora 22.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org
[ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we introduce a new sort key, we need to update the
hists__calc_col_len() function accordingly, otherwise the width
will be limited to strlen(header).
We can't update it when obtaining a line value for a column (for
instance, in sort__srcline_cmp()), because we reset it all when doing a
resort (see hists__output_recalc_col_len()), so we need to, from what is
in the hist_entry fields, set each of the column widths.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 409a8be615 ("perf tools: Add sort by src line/number")
Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The iter_add_next_cumulative_entry() function calls hist_entry__cmp(),
which may want to access the hists where this hist_entry is stored,
initialize it to let that happen and avoid segfaults.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqg98sfn4fvwcxp0pdvqauie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to unset 'perf_event_attr::freq' bit (default 1) when
'period' term is specified within event definition like:
-e 'cpu/cpu-cycles,call-graph=fp,time,period=100000'
otherwise it will handle the period value as frequency
(and fail if it crossed the maximum allowed frequency value).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150808171210.GC17040@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report/script srcline currently only the base file name of the
source file is printed. This is a good default because it usually fits
on the screen.
But in some cases we want to know the full file name, for example to
aggregate hits per file.
In the later case we need more than the base file name to resolve file
naming collisions: for example the kernel source has ~70 files named
"core.c"
It's also useful as input to post processing tools which want to point
to the right file.
Add a flag to allow full file name output.
Add an option to perf report/script to enable this option.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438986245-15191-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move callchain option parse related code to util.c, to avoid dragging
more object files into the python binding.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438890294-33409-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'struct perf_counts' and associated functions into separate
object, so we could remove stat.c object dependency from python build.
It makes the python code to build properly, because it fails to load due
to missing stat-shadow.c object dependency if some patches from Kan
Liang are applied.
So apply this one, then Kan's.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150807105103.GB8624@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patches introduce llvm__compile_bpf() to compile source file to
eBPF object. This patch adds testcase to test it. It also tests libbpf
by opening generated object after applying next patch which introduces
HAVE_LIBBPF_SUPPORT option.
Since llvm__compile_bpf() prints long messages which users who don't
explicitly test llvm doesn't care, this patch set verbose to -1 to
suppress all debug, warning and error message, and hint user use 'perf
test -v' to see the full output.
For the same reason, if clang is not found in PATH and there's no [llvm]
section in .perfconfig, skip this test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-17-git-send-email-wangnan0@huawei.com
[ Add tools/lib/bpf/ to tools/perf/MANIFEST, so that the tarball targets build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help user find correct kernel include options, this patch extracts
them from kbuild system by an embedded script kinc_fetch_script, which
creates a temporary directory, generates Makefile and an empty dummy.o
then use the Makefile to fetch $(NOSTDINC_FLAGS), $(LINUXINCLUDE) and
$(EXTRA_CFLAGS) options. The result is passed to compiler script using
'KERNEL_INC_OPTIONS' environment variable.
Because options from kbuild contains relative path like
'Iinclude/generated/uapi', the work directory must be changed. This is
done by previous patch.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436445342-1402-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch detects kernel build directory by checking the existence of
include/generated/autoconf.h.
clang working directory is changed to kbuild directory if it is found,
to help user use relative include path. Following patch will detect
kernel include directory, which contains relative include patch so this
workdir changing is needed.
Users are allowed to set 'kbuild-dir = ""' manually to disable this
checking.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-owyfwfbemrjn0tlj6tgk2nf5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the core patch for supporting eBPF on-the-fly compiling, does
the following work:
1. Search clang compiler using search_program().
2. Run command template defined in llvm-bpf-cmd-template option in
[llvm] config section using read_from_pipe(). Patch of clang and
source code path is injected into shell command using environment
variable using force_set_env().
Commiter notice:
When building with DEBUG=1 we get a compiler error that gets fixed with
the same approach described in commit b236512280fb:
perf kmem: Fix compiler warning about may be accessing uninitialized variable
The last argument to strtok_r doesn't need to be initialized, its
just a placeholder to make this routine reentrant, but gcc doesn't know
about that and complains, breaking the build, fix it by setting it to
NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces [llvm] config section with 5 options. Following
patches will use then to config llvm dynamica compiling.
'llvm-utils.[ch]' is introduced in this patch for holding all
llvm/clang related stuffs.
Example:
[llvm]
# Path to clang. If omit, search it from $PATH.
clang-path = "/path/to/clang"
# Cmdline template. Following line shows its default value.
# Environment variable is used to passing options.
#
# *NOTE*: -D__KERNEL__ MUST appears before $CLANG_OPTIONS,
# so user have a chance to use -U__KERNEL__ in $CLANG_OPTIONS
# to cancel it.
clang-bpf-cmd-template = "$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS \
$KERNEL_INC_OPTIONS -Wno-unused-value \
-Wno-pointer-sign -working-directory \
$WORKING_DIR -c $CLANG_SOURCE -target \
bpf -O2 -o -"
# Options passed to clang, will be passed to cmdline by
# $CLANG_OPTIONS.
clang-opt = "-Wno-unused-value -Wno-pointer-sign"
# kbuild directory. If not set, use /lib/modules/`uname -r`/build.
# If set to "" deliberately, skip kernel header auto-detector.
kbuild-dir = "/path/to/kernel/build"
# Options passed to 'make' when detecting kernel header options.
kbuild-opts = "ARCH=x86_64"
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1437477214-149684-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the event parser maximum error index from 10 to 13. That allows
PMU config terms of up to 10 characters to display un-truncated in the
error message.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the value of a PMU config term is silently truncated if it is
too big. This is an impediment to validating the value for other
criteria later on i.e. the user provides an invalid value that gets
truncated to a valid one.
The maximum value validation is only done for the parser where the error
is passed back to the user. In other cases the silent truncation
continues so as not to affect tools that perhaps rely on it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__format_bits() to get the format bits for a PMU config
term. Intel PT will use this to validate terms and to record format
bits to enable later interpreting the config from the attribute stored
in the perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_ITRACE_PERIOD_INSTRUCTIONS is zero so it got overwritten by the
default period type.
Fix by checking if the period type was set rather than if the value was
zero when applying the default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the cycles by default in branch sort mode.
To make enough room for the new column I removed dso_to. It is usually
redundant with dso_from.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-9-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can process branch data in annotate it makes sense to
support enabling branch recording from top too. Most of the code needed
for this is already in shared code with report. But we need to add:
- The option parsing code (using shared code from the previous patch)
- Document the options
- Set up the IPC/cycles accounting state in the top session
- Call the accounting code in the hist iter callback
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two new columns to the annotate display and display the average
cycles and the compute IPC if available.
When the LBR was not in any branch mode the IPC computation is
automatically disabled. We still display the cycle information.
Example output (with made up numbers):
The second column is the IPC and third average cycles.
│ __attribute__((noinline)) f2()
│ {
5.15 0.07 │ push %rbp
0.01 0.07 │ mov %rsp,%rbp
│ c = a / b;
9.87 0.07 │ mov a,%eax
0.07 │ mov b,%ecx
0.07 │ cltd
4.92 0.07 123│ idiv %ecx
70.79 0.07 │ mov %eax,__TMC_END__
│ }
9.25 0.07 │ pop %rbp
0.01 0.07 123│ ← retq
v2: Fix display problems.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the IPC and the basic block cycles for the annotate display.
IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.
The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.
The cycles/IPC are also put into the perf function annotation so that
the display code can show them.
Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.
v2: Compute IPC correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call the earlier added cycle histogram infrastructure from the perf
report hist iter callback. For this we walk the branch records.
This allows to use cycle histograms when browsing perf report annotate.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later patches need to cheaply check that the branch mode is in ANY. Add
a new function to check all event attrs and add a flag to the report
state, which is then initialized.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cycles is a new branch_info field available on some CPUs that indicates
the time deltas between branches in the LBR.
Add a sort key and output code for the cycles to allow to display the
basic block cycles individually in perf report.
We also pass in the cycles for weight when LBRs are processed, which
allows to get global and local weight, to get an estimate of the total
cost.
And also print the cycles information for perf report -D. I also added
printing for the previously missing LBR flags (mispredict etc.)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf currently fails to build on MIPS as there is no
tools/perf/arch/mips/Build file. Adding an empty file fixes this as
there are no MIPS-specific sources to build.
It looks like the same is needed for Alpha and PA-RISC, though I
haven't been able to test those.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 5e8c0fb6a9 ("perf build: Add arch x86 objects building")
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438704627.7315.2.camel@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving counter processing code into stat object as
perf_stat__process_counter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing 'struct perf_stat_config' into process_counter(), so that we can
make process_counter() non static and use it from other places.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'interval' into struct perf_stat_config. The point is to
centralize the base stat config so it could be used localy together with
other stat routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'output' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'scale' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'aggr_mode' into new struct. The point is to centralize the base
stat config so it could be used localy together with other stat routines
in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7b6ff0bdbf ("perf probe ppc64le:
Fixup function entry if using kallsyms lookup") adds 'struct map' into
probe-event.h but not forward declares it. This patch fixes it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 7b6ff0bdbf ("perf probe ppc64le: Fixup function entry if using kallsyms lookup")
Link: http://lkml.kernel.org/n/1436445342-1402-30-git-send-email-wangnan0@huawei.com
[ No need to include map.h, just forward declare 'struct map' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
va_args alternative to eprintf().
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-19-git-send-email-wangnan0@huawei.com
[ split from another patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without this patch, it is cumbersome to read the trace output but
ignoring the normal, potentially verbose, output of the debuggee. One
common example is doing something like the following:
perf trace -s find /tmp > /dev/null
Without this patch, the trace summary will be lost. Now, it will still
be printed at the end. This behavior is also applied by strace.
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-tqnks6y2cnvm5f9g2dsfr7zl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
color_vprintf was including the length of the invisible escape sequences
in its return argument. Don't include them to make the return value
usable for indentation calculations.
v2: Add comment, rebase
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seems like it's always '\n' through color_fprintf_ln, which is not used
at all, removing.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-2-git-send-email-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patchkit adds the ability to turn off time stamps per event.
One usaful case for partial time is to work with per-event callgraph to
enable "PEBS threshold > 1" (https://lkml.org/lkml/2015/5/10/196), which
can significantly reduce the sampling overhead.
The event samples with time stamps off will not be ordered.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To work like strace and dereference syscall pointer args we need to
insert probes (or tracepoints) right after we copy those bytes from
userspace.
Since we're formatting the syscall args at raw_syscalls:sys_enter time,
we need to have a formatter that just stores the position where, later,
when we get the probe:vfs_getname, we can insert the pointer contents.
Now, if a probe:vfs_getname with this format is in place:
# perf probe -l
probe:vfs_getname (on getname_flags:72@/home/git/linux/fs/namei.c with pathname)
That was, in this case, put in place with:
# perf probe 'vfs_getname=getname_flags:72 pathname=filename:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Then 'perf trace' will notice that and do the pointer -> contents
expansion:
# trace -e open touch /tmp/bla
0.165 (0.010 ms): touch/17752 open(filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
0.195 (0.011 ms): touch/17752 open(filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
0.512 (0.012 ms): touch/17752 open(filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
0.582 (0.012 ms): touch/17752 open(filename: /tmp/bla, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
#
Roughly equivalent to strace's output:
# strace -rT -e open touch /tmp/bla
0.000000 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 <0.000039>
0.000317 open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 <0.000102>
0.001461 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 <0.000072>
0.000405 open("/tmp/bla", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3 <0.000055>
0.000641 +++ exited with 0 +++
#
Now we need to either look for at all syscalls that are marked as
pointers and have some well known names ("filename", "pathname", etc)
and set the arg formatter to the one used for the "open" syscall in this
patch.
This implementation works for syscalls with just a string being copied
from userspace, for matching syscalls with more than one string being
copied via the same probe/trace point (vfs_getname) we need to extend
the vfs_getname probe spec to include the pointer too, but there are
some problems with that in 'perf probe' or the kernel kprobes code, need
to investigate before considering supporting multiple strings per
syscall.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xvuwx6nuj8cf389kf9s2ue2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using it as a magic number, 1024, fix that.
Eventually we need to stop doing it per line, and do it per
arg, traversing the args at output time, to avoid the memmove()
calls that will be used in the next cset to replace pointers
present at raw_syscalls:sys_enter time with its contents that
appear at probe:vfs_getname time, before raw_syscalls:sys_exit
time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4sz3wid39egay1pp8qmbur4u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can later decide if we will store where to expand the
pathname once we are handling vfs_getname or if we should instead
just go on and straight away print the pointer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ytxk5s5jpc50wahffmlxgxuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were accessing trace->syscalls.events members even when that struct
wasn't initialized, i.e. --no-syscalls was specified on the command
line, fix it to show that, still in debug mode, when we have an event
qualifier list, i.e. when we actually are doing subset syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 19867b6186 ("perf trace: Use event filters for the event qualifier list")
Link: http://lkml.kernel.org/n/tip-7980ym6vujgh3yiai0cqzc88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libtraceevent handler (session->tevent) is only initialized when
there are tracepoints in a perf.data event list, so do not call
pevent_set_function_resolve() in those cases, fixing a segfault.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xyynkucl5p4bcs13zi4i4b1f@git.kernel.org
Report-link: http://lkml.kernel.org/r/20150803174113.GA20282@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system (Arnaldo Carvalho de Melo).
- Adding build test for having ending double slash (Jiri Olsa)
- Introduce callgraph_set for callgraph option (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XBSW
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure changes:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz. (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding. (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system. (Arnaldo Carvalho de Melo)
- Add build test for having ending double slash. (Jiri Olsa)
- Introduce callgraph_set for callgraph option. (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pawel Moll reported build issue for having extra slash (/) at the end of
the prefix variable.
$ make prefix=/usr/local/
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
Adding automated test case for this.
Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150727182417.GD20509@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the command line option settings beats the per event period
settings:
With no global settings, we get per-event configuration:
$ perf record -e 'cpu/instructions,period=20000/' sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
With 'c' option period setup, we get 'c' option value:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 1000 ...
This patch makes the per-event settings overload the global 'c' option
setup:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
I think the making the per-event settings to overload any other config
makes more sense than current state. However it breaks the current
'period' term handling, which might cause some noise.. so let's see ;-).
Also fixing parse event tests with the new behaviour.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-3-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to overload any global settings for event and force user
specified term value. It will be useful for new time and backtrace
terms.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-2-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The semantic associated in tools/perf/ with foo__delete(instance) is to
release all resources referenced by 'instance' members and then release
the memory for 'instance' itself.
The perf_session_env__delete() function isn't doing this, it just does
the first part, but the space used by 'instance' itself isn't freed, as
it is embedded in a larger structure, that will be freed at other stage.
For these cases we se foo__exit(), i.e. the usage is:
void foo__delete(foo)
{
if (foo) {
foo__exit(foo);
free(foo);
}
}
But when we have something like:
struct bar {
struct foo foo;
. . .
}
Then we can't really call foo__delete(&bar.foo), we must have this
instead:
void bar__exit(bar)
{
foo__exit(&bar.foo);
/* free other bar-> resources */
}
void bar__delete(bar)
{
if (bar) {
bar__exit(bar);
free(bar);
}
}
So just rename perf_session_env__delete() to perf_session_env__exit().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-djbgpcfo5udqptx3q0flwtmk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When HAVE_ELF_GETPHDRNUM_SUPPORT is false we trip on this problem:
CC /tmp/build/perf/util/symbol-elf.o
util/symbol-elf.c:41:12: error: static declaration of ‘elf_getphdrnum’ follows non-static declaration
static int elf_getphdrnum(Elf *elf, size_t *dst)
^
In file included from util/symbol.h:19:0,
from util/symbol-elf.c:8:
/usr/include/libelf.h:206:12: note: previous declaration of ‘elf_getphdrnum’ was here
extern int elf_getphdrnum (Elf *__elf, size_t *__dst);
^
MKDIR /tmp/build/perf/bench/
/home/git/linux/tools/build/Makefile.build:68: recipe for target '/tmp/build/perf/util/symbol-elf.o' failed
make[3]: *** [/tmp/build/perf/util/symbol-elf.o] Error 1
Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qcmekyfedmov4sxr0wahcikr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To not sample, what we want are just the PERF_RECORD_ lifetime events
for threads, using the default, PERF_TYPE_HARDWARE +
PERF_COUNT_HW_CYCLES and freq=1 (the default), makes perf reenable
irq_vectors:local_timer_entry, disabling nohz, not good for some use
cases where all we want is to get notifications when threads comes and
goes...
Fix it by using PERF_TYPE_SOFTWARE (no counter rotation) and
PERF_COUNT_SW_DUMMY (created by Adrian so that we could have access to
those PERF_RECORD_ goodies).
Reported-by: Luiz Fernando Capitulino <lcapitulino@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kfsijirfrs6xfhkcdxeoen06@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those were added to the kernel and tooling but we forgot to
expose them via the python binding, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sg1m6t2c58gchidfce4hmitg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The python binding still doesn't provide symbol resolving facilities,
but the recent addition of the trace_event__register_resolver() function
made it add as a dependency the machine__resolve_kernel_addr() method,
that in turn drags all the symbol resolving code.
The problem:
[root@zoo ~]# perf test -v python
17: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 6853
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: machine__resolve_kernel_addr
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
[root@zoo ~]#
Fix it by requiring this function to receive the resolver as a
parameter, just like pevent_register_function_resolver(), i.e. do
not explicitely refer to an object file not included in
tools/perf/util/python-ext-sources.
[root@zoo ~]# perf test python
17: Try 'import perf' in python, checking link problems : Ok
[root@zoo ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: c3168b0db9 ("perf symbols: Provide libtraceevent callback to resolve kernel symbols")
Link: http://lkml.kernel.org/n/tip-vxlhh95v2em9zdbgj3jm7xi5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with a prefix ending with a slash, for example:
$ make prefix=/usr/local/
one of the perf tests fail to compile due to BUILD_STR macro mishandling
bindir_SQ string containing with two slashes:
-DBINDIR="BUILD_STR(/usr/local//bin)"
with the following error:
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
This patch works around the problem by "cleaning" the bindir string
using make's abspath function.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438092613-21014-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The transaction length metrics in perf stat -T broke recently.
It would not match the metric correctly and always print K/sec.
This was caused by a incorrect update of the cycles_in_tx statistics.
Update the correct variable.
Also the check for zero division was reversed, which resulted in K/sec
being printed for no transactions. Fix this also up.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1438039491-22091-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option --show-switch-events to show switch events in a similar
fashion to --show-task-events and --show-mmap-events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracking event does not have to be the first event so replace
perf_evlist__first() with perf_evlist__id2evsel() which uses the event
ID to find the correct evsel.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa