Add some test vectors for 128-bit cmac(camellia) as found in
draft-kato-ipsec-camellia-cmac96and128-01 section 6.2.
The document also shows vectors for camellia-cmac-96, and for VK with a
length greater than 16, but I'm not sure how to express those in testmgr.
This also leaves cts(cbc(camellia)) untested, but I can't seem to find any
tests for that that I could put into testmgr.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://datatracker.ietf.org/doc/pdf/draft-kato-ipsec-camellia-cmac96and128-01
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cryptd hash template was still using the obsolete cra_init/cra_exit
interface. Make it use the modern ahash init_tfm/exit_tfm instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helpers crypto_clone_ahash and crypto_clone_shash.
They are the hash-specific counterparts of crypto_clone_tfm.
This allows code paths that cannot otherwise allocate a hash tfm
object to do so. Once a new tfm has been obtained its key could
then be changed without impacting other users.
Note that only algorithms that implement clone_tfm can be cloned.
However, all keyless hashes can be cloned by simply reusing the
tfm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the helper crypto_clone_tfm. The purpose is to
allocate a tfm object with GFP_ATOMIC. As we cannot sleep, the
object has to be cloned from an existing tfm object.
This allows code paths that cannot otherwise allocate a crypto_tfm
object to do so. Once a new tfm has been obtained its key could
then be changed without impacting other users.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a crypto_tfm_get interface to allow tfm objects to be shared.
They can still be freed in the usual way.
This should only be done with tfm objects with no keys. You must
also not modify the tfm flags in any way once it becomes shared.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A number of low-level functions were exposed in crypto.h. Move
them into algapi.h (and internal.h).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocating the hash state on the stack limits its size. Change
this to use kmalloc so the limit can be removed for new drivers.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When jent initialisation fails for any reason other than ENOENT,
the entire drbg fails to initialise, even when we're not in FIPS
mode. This is wrong because we can still use the kernel RNG when
we're not in FIPS mode.
Change it so that it only fails when we are in FIPS mode.
Fixes: 57225e6797 ("crypto: drbg - Use callback API for random readiness")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to SP800-90B, two health failures are allowed: the intermittend
and the permanent failure. So far, only the intermittent failure was
implemented. The permanent failure was achieved by resetting the entire
entropy source including its health test state and waiting for two or
more back-to-back health errors.
This approach is appropriate for RCT, but not for APT as APT has a
non-linear cutoff value. Thus, this patch implements 2 cutoff values
for both RCT/APT. This implies that the health state is left untouched
when an intermittent failure occurs. The noise source is reset
and a new APT powerup-self test is performed. Yet, whith the unchanged
health test state, the counting of failures continues until a permanent
failure is reached.
Any non-failing raw entropy value causes the health tests to reset.
The intermittent error has an unchanged significance level of 2^-30.
The permanent error has a significance level of 2^-60. Considering that
this level also indicates a false-positive rate (see SP800-90B section 4.2)
a false-positive must only be incurred with a low probability when
considering a fleet of Linux kernels as a whole. Hitting the permanent
error may cause a panic(), the following calculation applies: Assuming
that a fleet of 10^9 Linux kernels run concurrently with this patch in
FIPS mode and on each kernel 2 health tests are performed every minute
for one year, the chances of a false positive is about 1:1000
based on the binomial distribution.
In addition, any power-up health test errors triggered with
jent_entropy_init are treated as permanent errors.
A permanent failure causes the entire entropy source to permanently
return an error. This implies that a caller can only remedy the situation
by re-allocating a new instance of the Jitter RNG. In a subsequent
patch, a transparent re-allocation will be provided which also changes
the implied heuristic entropy assessment.
In addition, when the kernel is booted with fips=1, the Jitter RNG
is defined to be part of a FIPS module. The permanent error of the
Jitter RNG is translated as a FIPS module error. In this case, the entire
FIPS module must cease operation. This is implemented in the kernel by
invoking panic().
The patch also fixes an off-by-one in the RCT cutoff value which is now
set to 30 instead of 31. This is because the counting of the values
starts with 0.
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix kernel-doc warnings by adding "struct" keyword or "enum" keyword.
Also fix 2 function parameter descriptions.
Change some functions and structs from kernel-doc /** notation
to regular /* comment notation.
async_pq.c:18: warning: cannot understand function prototype: 'struct page *pq_scribble_page; '
async_pq.c:18: error: Cannot parse struct or union!
async_pq.c:40: warning: No description found for return value of 'do_async_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'blocks' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'offsets' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'disks' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'len' not described in 'do_sync_gen_syndrome'
async_pq.c:109: warning: Function parameter or member 'submit' not described in 'do_sync_gen_syndrome'
async_tx.c:136: warning: cannot understand function prototype: 'enum submit_disposition '
async_tx.c:264: warning: Function parameter or member 'tx' not described in 'async_tx_quiesce'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_unregister_alg() function expects callers to ensure that any
algorithm that is unregistered has a refcnt of exactly 1, and issues a
BUG_ON() if this is not the case. However, there are in fact drivers that
will call crypto_unregister_alg() without ensuring that the refcnt has been
lowered first, most notably on system shutdown. This causes the BUG_ON() to
trigger, which prevents a clean shutdown and hangs the system.
To avoid such hangs on shutdown, demote the BUG_ON() in
crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because
this problem was observed on a 6.2 kernel, cf the link below.
Link: https://lore.kernel.org/r/87r0tyq8ph.fsf@toke.dk
Cc: stable@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The performance of the crypto fuzz tests has greatly regressed since
v5.18. When booting a kernel on an arm64 dev board with all software
crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the
fuzz tests now take about 200 seconds to run, or about 325 seconds with
lockdep enabled, compared to about 5 seconds before.
The root cause is that the random number generation has become much
slower due to commit d4150779e6 ("random32: use real rng for
non-deterministic randomness"). On my same arm64 dev board, at the time
the fuzz tests are run, get_random_u8() is about 345x slower than
prandom_u32_state(), or about 469x if lockdep is enabled.
Lockdep makes a big difference, but much of the rest comes from the
get_random_*() functions taking a *very* slow path when the CRNG is not
yet initialized. Since the crypto self-tests run early during boot,
even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in
my case) doesn't prevent this. x86 systems don't have this issue, but
they still see a significant regression if lockdep is enabled.
Converting the "Fully random bytes" case in generate_random_bytes() to
use get_random_bytes() helps significantly, improving the test time to
about 27 seconds. But that's still over 5x slower than before.
This is all a bit silly, though, since the fuzz tests don't actually
need cryptographically secure random numbers. So let's just make them
use a non-cryptographically-secure RNG as they did before. The original
prandom_u32() is gone now, so let's use prandom_u32_state() instead,
with an explicitly managed state, like various other self-tests in the
kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do. This
also has the benefit that no locking is required anymore, so performance
should be even better than the original version that used prandom_u32().
Fixes: d4150779e6 ("random32: use real rng for non-deterministic randomness")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The report function is currently conditionalised on CONFIG_NET.
As it's only used by CONFIG_CRYPTO_USER, conditionalising on that
instead of CONFIG_NET makes more sense.
This gets rid of a rarely used code-path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to rng into the rng code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to skcipher into the skcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to kpp into the kpp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to acomp into the acomp code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to hash into the hash code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to akcipher into the akcipher code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all stat code specific to aead into the aead code.
While we're at it, change the stats so that bytes and counts
are always incremented even in case of error. This allows the
reference counting to be removed as we can now increment the
counters prior to the operation.
After the operation we simply increase the error count if necessary.
This is safe as errors can only occur synchronously (or rather,
the existing code already ignored asynchronous errors which are
only visible to the callback function).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The stats code resurrected the unions from the early days of
kernel crypto. This patch starts the process of moving them
out to the individual type structures as we do for everything
else.
In particular, add a report_stat function to cra_type and call
that from the stats code if available. This allows us to move
the actual code over one-by-one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
As FIPS may disable algorithms it is useful to show their status
in /proc/crypto.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rewrite the bitwise operations to silence the sparse warnings:
CHECK ../crypto/ecc.c
../crypto/ecc.c:1387:39: warning: dubious: !x | y
../crypto/ecc.c:1397:47: warning: dubious: !x | y
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the akcipher_request_complete helper instead of calling the
completion function directly. In fact the previous code was buggy
in that EINPROGRESS was never passed back to the original caller.
Fixes: 3d5b1ecdea ("crypto: rsa - RSA padding algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the crypto_request_complete helper instead of calling the
completion function directly.
This patch also removes the voodoo programming previously used
for unaligned ahash operations and replaces it with a sub-request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AEAD reuses the existing request object for its child. This is
error-prone and unnecessary. This patch adds a subrequest object
just like we do for skcipher and hash.
This patch also restores the original completion function as we
do for skcipher/hash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a66 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The selftest code is built into the x509_key_parser module, and depends
on the pkcs7_message_parser module, which in turn has a dependency on
the key parser, creating a dependency loop and a resulting link
failure when the pkcs7 code is a loadable module:
ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest':
crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message'
ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data'
ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify'
ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust'
ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message'
Avoid this by only allowing the selftest to be enabled when either
both parts are loadable modules, or both are built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This type of request is often happened in AF_ALG cases.
So add this vector in default cipher config array.
Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit 1ca2809897.
While the akcipher API as a whole is designed to be called only
from thread context, its completion path is still called from
softirq context as usual. Therefore we must not use GFP_KERNEL
on that path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.
However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: 8083b1bf81 ("crypto: xts - add support for ciphertext stealing")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously the child skcipher request was stored on the stack and
therefore needed to be zeroed. As it is now dynamically allocated
we no longer need to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for
Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023
must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256,
SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS
mode.
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it is seqiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.
However, as the caller of seqiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: 0a270321db ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it is essiv only handles the special return value of EINPROGERSS,
which means that in all other cases it will free data related to the
request.
However, as the caller of essiv may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free.
Fixes: be1eb7f78a ("crypto: essiv - create wrapper template...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RFC4106 wraps AES in GCM mode, and can be used with larger key sizes
than 128/160 bits, just like AES itself. So add these to the tcrypt
recipe so they will be benchmarked as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
load_keys_from_buffer() in net/wireless/reg.c duplicates
x509_load_certificate_list() in crypto/asymmetric_keys/x509_loader.c
for no apparent reason.
Deduplicate it. No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/e7280be84acda02634bc7cb52c97656182b9c700.1673197326.git.lukas@wunner.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The skcipher walk API implementation avoids scatterwalk_map() for
mapping the source and destination buffers, and invokes kmap_atomic()
directly if the buffer in question is not in low memory (which can only
happen on 32-bit architectures). This avoids some overhead on 64-bit
architectures, and most notably, permits the skcipher code to run with
preemption enabled.
Now that scatterwalk_map() has been updated to use kmap_local(), none of
this is needed, so we can simply use scatterwalk_map/unmap instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
aria-avx assembly code accesses members of aria_ctx with magic number
offset. If the shape of struct aria_ctx is changed carelessly,
aria-avx will not work.
So, we need to ensure accessing members of aria_ctx with correct
offset values, not with magic numbers.
It adds ARIA_CTX_enc_key, ARIA_CTX_dec_key, and ARIA_CTX_rounds in the
asm-offsets.c So, correct offset definitions will be generated.
aria-avx assembly code can access members of aria_ctx safely with
these definitions.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel provides implementations of the NIST ECDSA signature
verification primitives. For key sizes of 256 and 384 bits respectively
they are approved and can be enabled in FIPS mode. Do so.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Howells