Commit Graph

108950 Commits

Author SHA1 Message Date
Martin Fuzzey 1579c7b9fe ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.
In order to save power the DDR pins should be put into high
impedance when in suspend to RAM.

This requires manually requesting self refresh (rather than using the
automatic mode implemented by the CCM / ESDCTL), followed by
reconfiguring the IOMUXC.

Of course the code to do this cannot itself run from DDR so the
code is copied to and executed from internal memory.

In my tests using a custom i.MX53 board with LPDDR2 RAM
this reduced the suspend power consumption from 200mW to 60mW.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:36 +08:00
Anson Huang 5739b919cf ARM: imx: add msl support for imx7d
Add i.MX7D MSL support.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:35 +08:00
Anson Huang 52d7aec2b8 ARM: imx7d: add low level debug uart support
Add low level uart debug support for imx7d

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:35 +08:00
Fabio Estevam 666c884418 ARM: imx: mmdc: Include "common.h" header file
Include the "common.h" header file to fix the following sparse warning:

arch/arm/mach-imx/mmdc.c:66:5: warning: symbol 'imx_mmdc_get_ddr_type' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:34 +08:00
Shenwei Wang 65d0a16dce ARM: imx: Correct the comments in time.c
The comments were corrected as the following to reflect
the real situation of Freescale MXC timer IP block.
There are totally 4 version of the timer on Freescale i.MX SoCs.

Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:33 +08:00
Shenwei Wang d0185d96c6 ARM: imx: Remove the duplicated function declaration
Removed the duplicated function declaration of mxc_timer_init
which was already declared in drivers/clk/imx/clk.h.

Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:33 +08:00
Krzysztof Kozlowski 9b589a83cf ARM: imx: Constify irq_domain_ops
The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:33 +08:00
Shawn Guo 35e2916f70 ARM: imx6: initialize CCM_CLPCR_LPM into RUN mode earlier
Commit 4631960d26da ("ARM: imx6: set initial power mode in pm function")
moves imx6_set_lpm() from clock init function into
imx6_pm_common_init().  This causes a hang when cpuidle support is
enabled.  The reason for that is ARM core clock is shut down
unexpectedly by WAIT mode.  It happens with the following call stack:

    cpuidle_register_governor()
        cpuidle_switch_governor()
            cpuidle_uninstall_idle_handler()
                synchronize_sched()
                    wait_rcu_gp()
                        wait_for_completion()

When wait_for_completion() is called as above, all cores are idle/WFI.
Hence, the reset value of CCM_CLPCR_LPM - WAIT mode, will trigger a
hardware shutdown of the ARM core clock.

To fix the regression, we need to ensure that CCM_CLPCR_LPM is
initialized into RUN mode earlier than cpuidle governor registration,
which is a postcore_initcall.  This patch creates function
imx6_pm_ccm_init() to map CCM block and initialize CCM_CLPCR_LPM into
RUN mode, and have the function called from machine .init_irq hook,
which should be early enough.

Reported-by: Kevin Hilman <khilman@kernel.org>
Fixes: 8fb76a07e2 ("ARM: imx6: set initial power mode in pm function")
Tested-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:18 +08:00
Shawn Guo 11f6812009 ARM: imx: move clock drivers into drivers/clk
After the cleanup on clock drivers, they are now ready to be moved into
drivers/clk.  Let's move them into drivers/clk/imx folder.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-03 14:44:33 +08:00
Shawn Guo 0c831317e7 ARM: imx: remove inclusions of platform headers
With the cleanup done before, we now can simply define base address and
irq as needed in clock driver, to get those platform header inclusions
removed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:32 +08:00
Shawn Guo 3bec5f8184 ARM: imx: add clk-pllv1 type support
Instead of calling cpu_is_xxx() in clk-pllv1 driver, let's add clk-pllv1
type support to handle the difference/quirk in particular SoC designs.
Doing so will help get clk-pllv1 driver ready for being moved out of
arch/arm/mach-imx folder.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:32 +08:00
Shawn Guo 961dfd37fa ARM: imx6: do not use cpu_is_xxx() in clock driver
As we're about to move clock drivers out of arch/arm/mach-imx,
cpu_is_xxx() shouldn't be used any more.  Let's avoid the call by
looking at the device tree machine compatible string to determine
which SoC the clock driver is running on.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:31 +08:00
Shawn Guo f0b478b5d4 ARM: imx6: let pm code map CCM block on its own
We are about to move imx6 clock driver into drivers/clk, so let's get
imx6 pm code map CCM block on its own rather than relying on clock
driver to do the mapping.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:31 +08:00
Shawn Guo 8fb76a07e2 ARM: imx6: set initial power mode in pm function
Rather than setting initial low-power mode in every single i.MX6 clock
initialization function, we should really do that in pm code.  Let's
move imx6q_set_lpm(WAIT_CLOCKED) call into imx6_pm_common_init().

While at it, let's rename the function to imx6_set_lpm() since it's
actually common for all i.MX6 SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:31 +08:00
Shawn Guo f3a9249d09 ARM: imx5: let pm code map CCM block on its own
We are about to move imx5 clock driver into drivers/clk, so let's get
imx5 pm code map CCM block on its own rather than relying on clock
driver to do the mapping.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:30 +08:00
Shawn Guo 9bbef18750 ARM: imx: move revision definitions and declarations into a header
The revision definitions and declarations are widely used by clock
drivers.  As a step of moving clock drivers out of arch/arm/mach-imx,
let's create header include/soc/imx/revision.h to accommodate them.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:30 +08:00
Shawn Guo 5ab96a8df0 ARM: imx: use dynamic mapping for CCM
Replace the static mapping of CCM block in clock drivers with dynamic
mapping.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:30 +08:00
Shawn Guo 6c529c499f ARM: imx: use dynamic mapping for timer
Pass physical address of timer block to mxc_timer_init() call, which in
turn does dynamic mapping within the function.  Thus, we can avoid using
static mapping in clock drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:29 +08:00
Andy Lutomirski 61f01dd941 x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with
SS == 0 results in an invalid usermode state in which SS is apparently
equal to __USER_DS but causes #SS if used.

Work around the issue by setting SS to __KERNEL_DS __switch_to, thus
ensuring that SYSRET never happens with SS set to NULL.

This was exposed by a recent vDSO cleanup.

Fixes: e7d6eefaaa x86/vdso32/syscall.S: Do not load __USER32_DS to %ss
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-26 17:57:38 -07:00
Linus Torvalds 9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Linus Torvalds d89b3e19ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This push fixes a build problem with img-hash under non-standard
  configurations and a serious regression with sha512_ssse3 which can
  lead to boot failures"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA
  crypto: x86/sha512_ssse3 - fixup for asm function prototype change
2015-04-26 13:51:05 -07:00
Linus Torvalds 7f9f44308c CRIS changes for 4.1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iEYEABECAAYFAlU70nMACgkQ31LbvUHyf1cYgwCfSmPhyLFmr0pGM/BxsVY7K1v6
 PaEAn2+7xfZV38E6hwrGMrT42ZvKyL6r
 =LHQU
 -----END PGP SIGNATURE-----

Merge tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris

Pull arch/cris updates from Jesper Nilsson:
 "Some much needed love for the CRIS-port.

  There's a bunch of changes this time, giving the CRISv32 port a bit of
  modern makeover with device-tree, irq domain and gpiolib support, and
  more switchover to generic frameworks.

  Some small fixes and removal of the theoretical SMP support brings up
  the rear"

* tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: fix integer overflow in ELF_ET_DYN_BASE
  CRISv32: use GENERIC_SCHED_CLOCK
  CRISv32: use MMIO clocksource
  CRISv32: use generic clockevents
  CRIS: use generic headers via Kbuild
  CRIS: use generic cmpxchg.h
  CRIS: use generic atomic.h
  CRIS: use generic atomic bitops
  CRISv10: remove redundant macros from system.h
  CRIS: remove SMP code
  CRISv32: don't enable irqs in INIT_THREAD
  CRISv32: handle multiple signals
  CRISv32: prevent bogus restarts on sigreturn
  CRISv32: don't attempt syscall restart on irq exit
  Add binding documentation for CRIS
  CRIS: add Axis 88 board device tree
  CRISv32: add device tree support
  CRISv32: add irq domains support
  CRIS: enable GPIOLIB
2015-04-26 13:31:05 -07:00
Linus Torvalds 63905bba5b powerpc fixes for 4.1
- Fix for mm_dec_nr_pmds() from Scott.
 - Fixes for oopses seen with KVM + THP from Aneesh.
 - Build fixes from Aneesh & Shreyas.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVOsk5AAoJEFHr6jzI4aWACWMP/3EaNoeA1g8VbZWZEdRaoLvX
 W7D08DI3Dt8HLxyn2JR08jYZF0gr68XrF6OiscVVki7wVXT8fbH4jSNmBkbzNH95
 d9taScJyR1CUavkhsXivnR1qEE1Fi2KA2OW9RaNfoSt1MVtdsvOK6xXklUGksuJQ
 XygzyrRr4Dj82kuMUAMO0YDMvknMlzi3a8dzyrWZBXBZOOTWavGB6bQKtCTaOQ99
 3OFGLQ10uY7lmdHDi0t0tQ99FuYfLiJpg5fTLoUni4J5tFp8JlZ+x0Gwc0apN0cy
 Ym8EO6++qWDv8FXvYEPfVUEjbF1fyPiawUgpkMnyvXgd8K5G85SIrtkGW0Ml+6sX
 GfJH8w9hpDbF5EnWlC9bn/jT7sHBHFdrxZuQUc0L4M2OtM73R2a0Xr3b7ZxFCD1q
 7RpYu8MKKcyvaIXNg7VBJjj8zL+WmUJKF6J5uX5bGU2xH0khmp0vTknyyjbwrlcF
 uHidv5ZhMt3aAI70v14jA5BTEmLyOYRu58Ei6cT/VT/DjdbpEApdK8BMAvKSEeib
 +hzh6oDFT92AM0tbg15bNmqGbGfgqtVKe4GDS2QyGaHGAFOGs1nPuSa9se1xYDcM
 CCtRyABwpzJsrCfwra2fsTU6FxlatK4ONViyWFBXa6mEjBNSZ4XmyZvdWUqlwpSC
 F5jNGppm5Ama6xxcLphA
 =6yQx
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc fixes from Michael Ellerman:

 - fix for mm_dec_nr_pmds() from Scott.

 - fixes for oopses seen with KVM + THP from Aneesh.

 - build fixes from Aneesh & Shreyas.

* tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/mm: Fix build error with CONFIG_PPC_TRANSACTIONAL_MEM disabled
  powerpc/kvm: Fix ppc64_defconfig + PPC_POWERNV=n build error
  powerpc/mm/thp: Return pte address if we find trans_splitting.
  powerpc/mm/thp: Make page table walk safe against thp split/collapse
  KVM: PPC: Remove page table walk helpers
  KVM: PPC: Use READ_ONCE when dereferencing pte_t pointer
  powerpc/hugetlb: Call mm_dec_nr_pmds() in hugetlb_free_pmd_range()
2015-04-26 13:23:15 -07:00
Linus Torvalds eadf16a912 This mostly includes the PPC changes for 4.1, which this time cover
Book3S HV only (debugging aids, minor performance improvements and some
 cleanups).  But there are also bug fixes and small cleanups for ARM,
 x86 and s390.
 
 The task_migration_notifier revert and real fix is still pending review,
 but I'll send it as soon as possible after -rc1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJVOONLAAoJEL/70l94x66DbsMIAIpZPsaqgXOC1sDEiZuYay+6
 rD4n4id7j8hIAzcf3AlZdyf5XgLlr6I1Zyt62s1WcoRq/CCnL7k9EljzSmw31WFX
 P2y7/J0iBdkn0et+PpoNThfL2GsgTqNRCLOOQlKgEQwMP9Dlw5fnUbtC1UchOzTg
 eAMeBIpYwufkWkXhdMw4PAD4lJ9WxUZ1eXHEBRzJb0o0ZxAATJ1tPZGrFJzoUOSM
 WsVNTuBsNd7upT02kQdvA1TUo/OPjseTOEoksHHwfcORt6bc5qvpctL3jYfcr7sk
 /L6sIhYGVNkjkuredjlKGLfT2DDJjSEdJb1k2pWrDRsY76dmottQubAE9J9cDTk=
 =OAi2
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second batch of KVM changes from Paolo Bonzini:
 "This mostly includes the PPC changes for 4.1, which this time cover
  Book3S HV only (debugging aids, minor performance improvements and
  some cleanups).  But there are also bug fixes and small cleanups for
  ARM, x86 and s390.

  The task_migration_notifier revert and real fix is still pending
  review, but I'll send it as soon as possible after -rc1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
  KVM: arm/arm64: check IRQ number on userland injection
  KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi
  KVM: VMX: Preserve host CR4.MCE value while in guest mode.
  KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8
  KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C
  KVM: PPC: Book3S HV: Streamline guest entry and exit
  KVM: PPC: Book3S HV: Use bitmap of active threads rather than count
  KVM: PPC: Book3S HV: Use decrementer to wake napping threads
  KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI
  KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken
  KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu
  KVM: PPC: Book3S HV: Minor cleanups
  KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update
  KVM: PPC: Book3S HV: Accumulate timing information for real-mode code
  KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT
  KVM: PPC: Book3S HV: Add ICP real mode counters
  KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode
  KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock
  KVM: PPC: Book3S HV: Add guest->host real mode completion counters
  KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte
  ...
2015-04-26 13:06:22 -07:00
Linus Torvalds d6a4c0e5d3 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:

 - new drivers for:
        - Ingenic JZ4780 controller
        - APM X-Gene controller
        - Freescale RaidEngine device
        - Renesas USB Controller

  - remove device_alloc_chan_resources dummy handlers

  - sh driver cleanups for peri peri and related emmc and asoc patches
    as well

  - fixes and enhancements spread over the drivers

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits)
  dmaengine: dw: don't prompt for DW_DMAC_CORE
  dmaengine: shdmac: avoid unused variable warnings
  dmaengine: fix platform_no_drv_owner.cocci warnings
  dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe()
  dmaengine: at_xdmac: unlock spin lock before return
  dmaengine: xgene: devm_ioremap() returns NULL on error
  dmaengine: xgene: buffer overflow in xgene_dma_init_channels()
  dmaengine: usb-dmac: Fix dereferencing freed memory 'desc'
  dmaengine: sa11x0: report slave capabilities to upper layers
  dmaengine: vdma: Fix compilation warnings
  dmaengine: fsl_raid: statify fsl_re_chan_probe
  dmaengine: Driver support for FSL RaidEngine device.
  dmaengine: xgene_dma_init_ring_mngr() can be static
  Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding
  arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes
  dmaengine: Add support for APM X-Gene SoC DMA engine driver
  dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver
  dmaengine: renesas,usb-dmac: Add device tree bindings documentation
  dmaengine: edma: fixed wrongly initialized data parameter to the edma callback
  dmaengine: ste_dma40: fix implicit conversion
  ...
2015-04-24 09:49:37 -07:00
Linus Torvalds d56a669ca5 Devicetree updates for 4.1:
- DT endianness specification bindings
 - Big endian 8250 serial support
 - DT overlay unittest updates
 - Various DT doc updates
 - Compile fixes for OF_IRQ=n
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVOG5kAAoJEMhvYp4jgsXihDgH/3pmPSjuRG1bhGssmnchHjWh
 SU2eS2MZnlD60UqRt7jd3smCX2qL83tfwpFhOvCT9Mz775E7ggmYq9fS8pCYAbaD
 x98mUrE2GzdUzlrL6RS8Z0ExjyGwbMoW3+cZtyPkmC6CsW0fwqEPmEyk7m+Hk8C3
 w3pWG06o+G8UjiFmwbr8Pki2ykxvucr22NCzH4SS6bAD4QOrQO3v48QkUg7XFlVc
 NHNzQbswL85uOJ7uuAbxg+s8TXkwcxUeMJEKldLrjuyppO3N1MjnOgCptnhVNOOb
 zK+IsS378jMiNjAg2ui/BLH60N5yadkgk4+L4iPPy+y/yR61NCVXxRe11IQJxb0=
 =rtv6
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull second batch of devicetree updates from Rob Herring:
 "As Grant mentioned in the first devicetree pull request, here is the
  2nd batch of DT changes for 4.1.  The main remaining item here is the
  endianness bindings and related 8250 driver support.

   - DT endianness specification bindings

   - big-endian 8250 serial support

   - DT overlay unittest updates

   - various DT doc updates

   - compile fixes for OF_IRQ=n"

* tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  frv: add io{read,write}{16,32}be functions
  mn10300: add io{read,write}{16,32}be functions
  Documentation: DT bindings: add doc for Altera's SoCFPGA platform
  of: base: improve of_get_next_child() kernel-doc
  Doc: dt: arch_timer: discourage clock-frequency use
  of: unittest: overlay: Keep track of created overlays
  of/fdt: fix allocation size for device node path
  serial: of_serial: Support big-endian register accesses
  serial: 8250: Add support for big-endian MMIO accesses
  of: Document {little,big,native}-endian bindings
  of/fdt: Add endianness helper function for early init code
  of: Add helper function to check MMIO register endianness
  of/fdt: Remove "reg" data prints from early_init_dt_scan_memory
  of: add vendor prefix for Artesyn
  of: Add dummy of_irq_to_resource_table() for IRQ_OF=n
  of: OF_IRQ should depend on IRQ_DOMAIN
2015-04-24 08:46:18 -07:00
Linus Torvalds 836ee4874e Initial ACPI support for arm64:
This series introduces preliminary ACPI 5.1 support to the arm64 kernel
 using the "hardware reduced" profile. We don't support any peripherals
 yet, so it's fairly limited in scope:
 
 - Memory init (UEFI)
 - ACPI discovery (RSDP via UEFI)
 - CPU init (FADT)
 - GIC init (MADT)
 - SMP boot (MADT + PSCI)
 - ACPI Kconfig options (dependent on EXPERT)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJVNOC2AAoJELescNyEwWM08dIH/1Pn5xa04wwNDn0MOpbuQMk2
 kHM7hx69fbXflTJpnZRVyFBjRxxr5qilA7rljAFLnFeF8Fcll/s5VNy7ElHKLISq
 CB0ywgUfOd/sFJH57rcc67pC1b/XuqTbE1u1NFwvp2R3j1kGAEJWNA6SyxIP4bbc
 NO5jScx0lQOJ3rrPAXBW8qlGkeUk7TPOQJtMrpftNXlFLFrR63rPaEmMZ9dWepBF
 aRE4GXPvyUhpyv5o9RvlN5l8bQttiRJ3f9QjyG7NYhX0PXH3DyvGUzYlk2IoZtID
 v3ssCQH3uRsAZHIBhaTyNqFnUIaDR825bvGqyG/tj2Dt3kQZiF+QrfnU5D9TuMw=
 =zLJn
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull initial ACPI support for arm64 from Will Deacon:
 "This series introduces preliminary ACPI 5.1 support to the arm64
  kernel using the "hardware reduced" profile.  We don't support any
  peripherals yet, so it's fairly limited in scope:

   - MEMORY init (UEFI)

   - ACPI discovery (RSDP via UEFI)

   - CPU init (FADT)

   - GIC init (MADT)

   - SMP boot (MADT + PSCI)

   - ACPI Kconfig options (dependent on EXPERT)

  ACPI for arm64 has been in development for a while now and hardware
  has been available that can boot with either FDT or ACPI tables.  This
  has been made possible by both changes to the ACPI spec to cater for
  ARM-based machines (known as "hardware-reduced" in ACPI parlance) but
  also a Linaro-driven effort to get this supported on top of the Linux
  kernel.  This pull request is the result of that work.

  These changes allow us to initialise the CPUs, interrupt controller,
  and timers via ACPI tables, with memory information and cmdline coming
  from EFI.  We don't support a hybrid ACPI/FDT scheme.  Of course,
  there is still plenty of work to do (a serial console would be nice!)
  but I expect that to happen on a per-driver basis after this core
  series has been merged.

  Anyway, the diff stat here is fairly horrible, but splitting this up
  and merging it via all the different subsystems would have been
  extremely painful.  Instead, we've got all the relevant Acks in place
  and I've not seen anything other than trivial (Kconfig) conflicts in
  -next (for completeness, I've included my resolution below).  Nearly
  half of the insertions fall under Documentation/.

  So, we'll see how this goes.  Right now, it all depends on EXPERT and
  I fully expect people to use FDT by default for the immediate future"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits)
  ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function
  ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface()
  ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface
  ARM64: kernel: acpi: honour acpi=force command line parameter
  ARM64: kernel: acpi: refactor ACPI tables init and checks
  ARM64: kernel: psci: let ACPI probe PSCI version
  ARM64: kernel: psci: factor out probe function
  ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer
  ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed
  ARM64 / ACPI: additions of ACPI documentation for arm64
  Documentation: ACPI for ARM64
  ARM64 / ACPI: Enable ARM64 in Kconfig
  XEN / ACPI: Make XEN ACPI depend on X86
  ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64
  clocksource / arch_timer: Parse GTDT to initialize arch timer
  irqchip: Add GICv2 specific ACPI boot support
  ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
  ACPI / processor: Make it possible to get CPU hardware ID via GICC
  ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID
  ARM64 / ACPI: Parse MADT for SMP initialization
  ...
2015-04-24 08:23:45 -07:00
Linus Torvalds fb65d872d7 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A few fixes for the recently merged development updates:

   - the update to convert a code branch in the procinfo structure
     forgot to update the nommu code.

   - VDSO only supported for V7 CPUs and later.

   - VDSO build creates files which should be ignored by git but are not.

   - ensure that make arch/arm/vdso/ doesn't build if it isn't enabled"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8344/1: VDSO: honor CONFIG_VDSO in Makefile
  ARM: 8343/1: VDSO: add build artifacts to .gitignore
  ARM: Fix nommu booting
  ARM: 8342/1: VDSO: depend on CPU_V7
2015-04-24 08:10:53 -07:00
Linus Torvalds 05f0c553e2 nios2 update for v4.1-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.5 (GNU/Linux)
 
 iQIVAwUAVTnob1WoEK+e3syCAQLGGg//SmjZ3bV+GK4w7xqoM1CFOAiI+WKnVAEs
 mzmtuJmpzRI7jxo4gSLRAIw49beMA1hNRuQV4GBe1RFgxp3hghl5kKiwyeNVaWDq
 cjsR4NHLwcMjwfAUnz+idiLV9Y4qKUCDU3h4Qt7SdyuHl9DY12GGkGoxIxNT1vdb
 UjguJj174HUmiehSOxGXddzPAbVT807H4BYIjqKJAfc7IusvhKZQZmEsnjMN6oqf
 honeRW6d2klyVs4uNMZy+FziChOGt7D1f5LKhF74PM6D9eesmayjT4HKuCSlzGG8
 I5gYGAoXGRSgo056pel4v1hW+8V+NulzG32cW4A9hiMKJ/rYD5J6Z+tNYgQO2U8k
 xtnDFsjOgvuBt+Ng7bkXIW06DfJ744v6+l0mtPwXYOw2q8zd+mXHO83/l3a0EX+O
 CZUCQPZATRfvGSNb7bar+HCOIwibGiEunpRd9CVe/NImaWhfFvLuKqIwJL/l9eoK
 NJHJo+KuIqlwssY0+HSUtBL2pWmSIrYQac3JI/j4uH4ORGGMAqUSdlk5Ewl3ZxWs
 daW7U2ROWNzWWUL4nKRTG4e+X/hxNOAmiubkvDjRsOLEhRbuRVeqQai/G7pMKbY/
 kHWrNH323NtDvx34zO5tBe+f0EjpJATIw5r1r9ty3NW+xie+vbSGCv+KMzhO7tn4
 5QoF20wfnUE=
 =pK6u
 -----END PGP SIGNATURE-----

Merge tag 'nios2-v4.1-rc1' of git://git.rocketboards.org/linux-socfpga-next

Pull arch/nios2 updates from Ley Foon Tan:

 - update cache management code

 - rework trap handler with new define trap #.

 - fix on check header warning.

* tag 'nios2-v4.1-rc1' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: rework cache
  nios2: Add types.h header required for __u32 type
  nios2: rework trap handler
  nios2: remove end address checking for initda
2015-04-24 07:59:07 -07:00
Linus Torvalds 668b54a1c2 blackfin updates for Linux 4.1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJVObp7AAoJEJommM3PjknHqFgP/istOuzjAx1bB1DA5nqDnlw/
 mNpcJh4yuF7A5uLGs5KtjQHAp1SGikNTdKKENWLYYwtBz/wvGq2/w9Rwd5zfV6b7
 IjIzWcriUn2CHuDPPhedwQ0dSMOaR6SRPMyGR6MTDOJFN5cyQLZyTK4CNleO3znL
 qfvHGIahfhFN/XRmbCOJ00SkLIRZYTgXT4eKJjdxBqW/fh78epyTERLdaZ4pd5IK
 dD6wQmG5DgUWxmFpYCUUBPtnMCrcEdw7o9wMhqzZWJj7nYL6ZYJ9GVfr6Q8vk7YX
 pvVIEVvUPuiz6sRTcUY2eSshgdB+cdcBTqwlLYHKw3QC7iG4SczmXiM5mxlAFb0u
 g0Td/KPOIWmf1AfMBqe4K9uZhA2T0JcgfkSGL5xUvDeCwrO91xtujUVSWWOJcudJ
 K+9hROsiYQWBsla1yv36XyXWLJP1LxOJyuC3gNKM0rGQUMTrlDn5GaYTw99kgdZk
 s3V8xuURacCzqxr8ch1adqSI/amgWTT7x29XaOMAl7xatxBh4deb2/2nNupNTwMD
 mAqTrYud7fQ2cx9BWvgeJ/GU0ohM7fuv+mQT3R/dHor1x1r9XTVc5qHH91o8DtgA
 GCAK+YkyDKYFHdWGoQIVsHHnUl5CBes3t+qZ4tlnBRHFQUrnJAPM9K1/r3M59txV
 sspFcOjihg2vS5vYnqXO
 =nong
 -----END PGP SIGNATURE-----

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  eth: bf609 eth clock: add pclk clock for stmmac driver probe
  blackfin: Wire up missing syscalls
  arch: blackfin: kernel: kgdb: Remove unused function
  dma: fix build error after update to v3.19
  blackfin: io: define __raw_readx/writex with bfin_readx/writex
  bf609: add resources for lcd nl8048
  pm: sometimes wake up from suspend to RAM would fail
  debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR
  bf609: remove softswitch i2c configuration from adv7842 and adv7511 platform data
  bf609: add platform data for soft switch devices on the video extenders
  bf609: enable soft switch gpio driver by default
  bf609: add gpio soft switch platform data for mcp23017 i2c devices
  bf609: use new SND_BF6XX_PCM to choose audio pcm driver
  bug[220] kgdb: change the smp cross core function entry
  arch: blackfin: kernel: setup.c: Cleaning up missing null-terminate in conjunction with strncpy
  blackfin: defconfigs: cleanup unused CONFIG_MTD_CHAR, add MTD_SPI_NOR for BF537-STAMP
2015-04-24 07:58:07 -07:00
Linus Torvalds fab1e5502c Metag architecture changes for v4.1
Just the one change for v4.1-rc1. A minor cleanup of copy_thread().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJVOPxYAAoJEGwLaZPeOHZ6g7EQAI4E+v160qzMBFuXp4A8DbcX
 5I33jwzIm38vJ7bT07ba0VwBUr7g2tvPBgfdJezjiOPPUfcq+9jvNb+qbX892UFN
 lpvtvKyyu4ZZ7wRfcUU1Vs3VVAHB5H3iEBc9PBdsm78ai8CoLNuRX6gySOUVScqc
 qZwPMK/F/z8yJCKKSg/gljbAGulyszV1LHLvphRtBivNBLCKand3Bk2lpFUkXrjp
 Z3CT5zEZoWip/Xx5p568VDLSrY4z3hD5XHmFUv/Xo1vXi+IHvfszvtFfHIstDNzG
 77uVUKzQhLvhH+mXC0lLD0VjDeE307nKLusVWpECg4rV5i4Xpv6Yye77dFTzqI+T
 wyW0nHDSHWkvdJA4rUjFcS8nuwy3qZvkGGPesC3PuFTwfvefS9DKtSJZqn9GBsPi
 uFb0wxYHh91XTQ5xhnbQLihg8vHtodHAApeQ5pv4rVakK7vIyx+D5wiLP8IYxp2j
 IMQCQfwoQaPBOVr5ri/FMWDr1vhSqdzNIN3kxlAFv2dV9KiOCG3aTzOZVLvwqlCH
 WEPpPmFaEoblENwTuJvMyQ7QCUVx/sDDw/2nvd2k6RSLj+0voqmNi17kGZ0V2fTe
 XYVX41Fvb2ppR9GklMoFMydv7weYz/1chCWNEAEv3iLgD+6Yi31DEmKh1KZgmhdZ
 VuHxBxFpD3Y6/SJnWvpu
 =XxGr
 -----END PGP SIGNATURE-----

Merge tag 'metag-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag

Pull Metag architecture updates from James Hogan:
 "Just the one change for v4.1-rc1.  A minor cleanup of copy_thread()"

* tag 'metag-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: copy_thread(): rename 'arg' argument to 'kthread_arg'
2015-04-24 07:56:50 -07:00
Linus Torvalds c76397e930 ARC changes for 4.1-rc1:
- perf fixes/improvements
 - miscll cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVOHi0AAoJEGnX8d3iisJe/LEP/0CZi32TvcLZks0d/euGUjrQ
 izY3/acjuCiBXTIXpEgbe7qikUgNUTuJjyXN4BCrwsjQ1diFt2v9/iH3bh/iNFMm
 s0Ykq2SW5T/owKSOOqpf7lPdFkuitogITnjZIF85kMQczzGDVz6FGj16UQ9jDdsK
 rxb21QBkyywBwh3usWZtV2DM8UGjnjWWV7mO9rJR1bl7BVJ9vnUU4pD6TDUnC+mx
 np+tqJAQ0GpXrXeZRjLYY2VlrWmj29//yZcOrAwhQpz6cSMa4IaIaD516AOY1ybo
 UOiepa6B9+rpXdKhM6+CQ564ga5S/lsldnPK3IQyrV3fzBG65BBWHysowGiGXMeo
 kzkiBMMnnxh1Xg74yn4WTeSHMIdQ8ilXi6zrewvQC7jvsvHGLF+rJ+75GNOeYzaV
 eK9dKAzsxvPpE23OknK/oLO9nVu+nxvllCWXobkASTwdzjKLj8csmUvVJbuy/hH+
 C6KSuVwuNXU7SBWvqJGdH6Iv0acZaueM32B8zkQ2d89ZDHRCLBLRq4vkhoKIJ8u4
 rm3ZUwn+TyXlO/RY7pr2tDUb9dsVx/qxGiFvow+o73jA1XMgEp60RpmgesK32mis
 veTeuplmq+I7ZjPyuHCWvSTM9nRXNSdCm2WIxirGliFzKbUIqouhondA076J9eU2
 AkCgh2TPG5h1SLTl/7Cs
 =No6A
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - perf fixes/improvements

 - misc cleanups

* tag 'arc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: don't add code for impossible case
  ARC: perf: Rename DT binding to not confuse with power mgmt
  ARC: perf: add user space attribution in callchains
  ARC: perf: Add kernel callchain support
  ARC: perf: support cache hit/miss ratio
  ARC: perf: Add some comments/debug stuff
  ARC: perf: make @arc_pmu static global
  ARC: mem init spring cleaning - No functional changes
  ARC: Fix RTT boot printing
  ARC: fold __builtin_constant_p() into test_bit()
  ARC: rename unhandled exception handler
  ARC: cosmetic: Remove unused ECR bitfield masks
  ARC: Fix WRITE_BCR
  ARC: [nsimosci] Update defconfig
  arc: copy_thread(): rename 'arg' argument to 'kthread_arg'
2015-04-24 07:55:54 -07:00
Linus Torvalds d869844bd0 x86: fix special __probe_kernel_write() tail zeroing case
Commit cae2a173fe ("x86: clean up/fix 'copy_in_user()' tail zeroing")
fixed the failure case tail zeroing of one special case of the x86-64
generic user-copy routine, namely when used for the user-to-user case
("copy_in_user()").

But in the process it broke an even more unusual case: using the user
copy routine for kernel-to-kernel copying.

Now, normally kernel-kernel copies are obviously done using memcpy(),
but we have a couple of special cases when we use the user-copy
functions.  One is when we pass a kernel buffer to a regular user-buffer
routine, using set_fs(KERNEL_DS).  That's a "normal" case, and continued
to work fine, because it never takes any faults (with the possible
exception of a silent and successful vmalloc fault).

But Jan Beulich pointed out another, very unusual, special case: when we
use the user-copy routines not because it's a path that expects a user
pointer, but for a couple of ftrace/kgdb cases that want to do a kernel
copy, but do so using "unsafe" buffers, and use the user-copy routine to
gracefully handle faults.  IOW, for probe_kernel_write().

And that broke for the case of a faulting kernel destination, because we
saw the kernel destination and wanted to try to clear the tail of the
buffer.  Which doesn't work, since that's what faults.

This only triggers for things like kgdb and ftrace users (eg trying
setting a breakpoint on read-only memory), but it's definitely a bug.
The fix is to not compare against the kernel address start (TASK_SIZE),
but instead use the same limits "access_ok()" uses.

Reported-and-tested-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-24 06:58:27 -07:00
Ard Biesheuvel 00425bb181 crypto: x86/sha512_ssse3 - fixup for asm function prototype change
Patch e68410ebf6 ("crypto: x86/sha512_ssse3 - move SHA-384/512
SSSE3 implementation to base layer") changed the prototypes of the
core asm SHA-512 implementations so that they are compatible with
the prototype used by the base layer.

However, in one instance, the register that was used for passing the
input buffer was reused as a scratch register later on in the code,
and since the input buffer param changed places with the digest param
-which needs to be written back before the function returns- this
resulted in the scratch register to be dereferenced in a memory write
operation, causing a GPF.

Fix this by changing the scratch register to use the same register as
the input buffer param again.

Fixes: e68410ebf6 ("crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer")
Reported-By: Bobby Powers <bobbypowers@gmail.com>
Tested-By: Bobby Powers <bobbypowers@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-24 20:09:01 +08:00
Ley Foon Tan 1a70db49a7 nios2: rework cache
- flush dcache before flush instruction cache
- remork update_mmu_cache and flush_dcache_page
- add shmparam.h

Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-24 14:49:53 +08:00
Ezequiel Garcia 2009337e30 nios2: Add types.h header required for __u32 type
Reported by the header checker (CONFIG_HEADERS_CHECK=y):

  CHECK   usr/include/asm/ (31 files)
./usr/include/asm/ptrace.h:77: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Ley Foon Tan <lftan@altera.com>
2015-04-24 14:49:14 +08:00
Steven Miao d91e14b3b9 eth: bf609 eth clock: add pclk clock for stmmac driver probe
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-24 11:36:35 +08:00
Chen Gang 4f650a5966 blackfin: Wire up missing syscalls
The related syscalls are below which may cause samples/kdbus building
break in next-20150401 tree, the related information and error:

    CALL    scripts/checksyscalls.sh
  <stdin>:1223:2: warning: #warning syscall kcmp not implemented [-Wcpp]
  <stdin>:1226:2: warning: #warning syscall finit_module not implemented [-Wcpp]
  <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp]
  <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp]
  <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp]
  <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp]
  <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp]
  <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp]
  <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp]
  <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp]
  [...]
    HOSTCC  samples/kdbus/kdbus-workers
  samples/kdbus/kdbus-workers.c: In function ‘prime_new’:
  samples/kdbus/kdbus-workers.c:930:18: error: ‘__NR_memfd_create’ undeclared (first use in this function)
    p->fd = syscall(__NR_memfd_create, "prime-area", MFD_CLOEXEC);
                    ^
  samples/kdbus/kdbus-workers.c:930:18: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2015-04-24 11:00:35 +08:00
Russell King 6b7acae74f Merge branches 'misc' and 'vdso' into for-next 2015-04-23 21:05:16 +00:00
Rickard Strandqvist b9061ef5d4 arch: blackfin: kernel: kgdb: Remove unused function
Remove the function kgdb_post_primary_code() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23 22:56:54 +08:00
Steven Miao 37557178a0 dma: fix build error after update to v3.19
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-23 21:34:33 +08:00
Steven Miao 1a3372bc52 blackfin: io: define __raw_readx/writex with bfin_readx/writex
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-23 21:34:33 +08:00
Scott Jiang b3df664b85 bf609: add resources for lcd nl8048
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-23 21:34:32 +08:00
Aaron Wu ef7dcaf1e7 pm: sometimes wake up from suspend to RAM would fail
Sometimes it fails to wake up from suspend to RAM, this is because
we would flush the data cache by assemble command FLUSHINV before
suspend to RAM, and there is a delay between this command execution
and cache flush completion. Add a 1uS delay to works around this.

Signed-off-by: Aaron Wu <Aaron.wu@analog.com>
2015-04-23 21:34:32 +08:00
Andre Wolokita bb717b33aa debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR
Interacting with the USB_PHY_TEST MMR through debugfs was causing wide-spread
chaos in the realm (kernel panic). Expunge all references to this demonic
register.

Signed-off-by: Andre Wolokita <Andre.Wolokita@analog.com>
2015-04-23 21:34:31 +08:00
Sonic Zhang f7fee0366c bf609: remove softswitch i2c configuration from adv7842 and adv7511 platform data
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23 21:34:30 +08:00
Sonic Zhang 199aad16d5 bf609: add platform data for soft switch devices on the video extenders
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23 21:34:29 +08:00
Sonic Zhang 707e6f0bc4 bf609: enable soft switch gpio driver by default
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23 21:34:29 +08:00
Sonic Zhang ea9b706b86 bf609: add gpio soft switch platform data for mcp23017 i2c devices
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23 21:34:28 +08:00
Scott Jiang 374feb1f04 bf609: use new SND_BF6XX_PCM to choose audio pcm driver
There is a new bf6xx audio dma driver, so we don't reuse
bf5xx i2s pcm driver again.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
2015-04-23 21:34:27 +08:00