CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it
sounds like it is requesting a weak key. Actually, it is requesting
that weak keys be forbidden (for algorithms that have the notion of
"weak keys"; currently only DES and XTS do).
Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which
it can be easily confused. (This in fact happened in the UX500 driver,
though just in some debugging messages.)
Therefore, make the intent clear by renaming it to
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some algorithms initialize their .cra_list prior to registration.
But this is unnecessary since crypto_register_alg() will overwrite
.cra_list when adding the algorithm to the 'crypto_alg_list'.
Apparently the useless assignment has just been copy+pasted around.
So, remove the useless assignments.
Exception: paes_s390.c uses cra_list to check whether the algorithm is
registered or not, so I left that as-is for now.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch convert the driver to the new crypto engine API.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Print and propagate the return value of platform_get_irq on failure.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the SG alignment APIs from the OMAP crypto support library instead
of using own implementations. This reduces the amount of copy-paste
code.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the driver to use autosuspend for runtime_pm. This boosts the
performance, and optimizes the power consumption for the driver. By
default, the timeout value for autosuspend is set to one second.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OMAP DES crypto accelerator itself is unable to detect weak keys, so
add a specific call to the generic des driver to check the key strength
if requested.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return error code -ENOMEM from the crypto_engine_alloc_init()
error handling case instead of 0, as done elsewhere in this function.
Fixes: f1b77aaca8 ("crypto: omap-des - Integrate with the crypto
engine framework")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto engine must be initialized before registering algorithms,
otherwise the test manager will crash as it attempts to execute
tests for the algos while they are being registered.
Fixes: f1b77aaca8 ("crypto: omap-des - Integrate with the crypto engine framework")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current crypto engine allow only ablkcipher_request to be enqueued.
Thus denying any use of it for hardware that also handle hash algo.
This patch modify the API for allowing to enqueue ciphers and hash.
Since omap-aes/omap-des are the only users, this patch also convert them
to the new cryptoengine API.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch move the whole crypto engine API to its own header
crypto/engine.h.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already have a generic function sg_nents_for_len which does
the same thing. This patch switches omap over to it and also
adds error handling in case the SG list is short.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the new dma_request_chan() the client driver does not need to look for
the DMA resource and it does not need to pass filter_fn anymore.
By switching to the new API the driver can now support deferred probing
against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: David S. Miller <davem@davemloft.net>
CC: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto engine framework had been merged, thus this patch integrates
with the newly added crypto engine framework to make the crypto hardware
engine under utilized as each block needs to be processed before the crypto
hardware can start working on the next block.
The crypto engine framework can manage and process the requests automatically,
so remove the 'queue' and 'queue_task' things in omap des driver.
Signed-off-by: Baolin <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When using DES module the next bug appears:
BUG: scheduling while atomic: kworker/0:1/63/0x00000102
With backtrace as follows:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[<c0012294>] (dump_backtrace) from [<c00124ac>] (show_stack+0x18/0x1c)
[<c0012494>] (show_stack) from [<c0752554>] (dump_stack+0x84/0xc4)
[<c07524d0>] (dump_stack) from [<c0750218>] (__schedule_bug+0x54/0x64)
[<c07501c4>] (__schedule_bug) from [<c07548a4>] (__schedule+0x4ac/0x53c)
[<c07543f8>] (__schedule) from [<c075496c>] (schedule+0x38/0x88)
[<c0754934>] (schedule) from [<c03c3984>] (rpm_resume+0x158/0x59c)
[<c03c382c>] (rpm_resume) from [<c03c3e1c>] (__pm_runtime_resume+0x54/0x6c)
[<c03c3dc8>] (__pm_runtime_resume) from [<c0568ff8>] (omap_des_handle_queue+0x154/0x7bc)
[<c0568ea4>] (omap_des_handle_queue) from [<c05696b8>] (omap_des_crypt+0x58/0xbc)
[<c0569660>] (omap_des_crypt) from [<c0569730>] (omap_des_cbc_decrypt+0x14/0x18)
[<c056971c>] (omap_des_cbc_decrypt) from [<c0297534>] (authenc_verify_ahash_done+0xe0/0xe8)
[<c0297454>] (authenc_verify_ahash_done) from [<c056a330>] (omap_sham_finish_req+0x58/0xa8)
[<c056a2d8>] (omap_sham_finish_req) from [<c056b714>] (omap_sham_done_task+0x1c0/0x1e0)
[<c056b554>] (omap_sham_done_task) from [<c003e53c>] (tasklet_action+0x80/0x118)
[<c003e4bc>] (tasklet_action) from [<c003e740>] (__do_softirq+0x11c/0x260)
[<c003e624>] (__do_softirq) from [<c003eb64>] (irq_exit+0xc0/0xfc)
[<c003eaa4>] (irq_exit) from [<c000f1c4>] (handle_IRQ+0x4c/0x98)
[<c000f178>] (handle_IRQ) from [<c0008568>] (gic_handle_irq+0x34/0x64)
[<c0008534>] (gic_handle_irq) from [<c0758540>] (__irq_svc+0x40/0x70)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< cut here >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Insight was seen in drivers/crypto/omap-sham.c driver.
All credits for this patch go to Grygorii Strashko.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_unmap_sg() is being called twice after completing the
task. Looks like this is a copy paste error when creating
des driver.
With this the following warn appears during boot:
[ 4.210457] ------------[ cut here ]------------
[ 4.215114] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1080 check_unmap+0x710/0x9a0()
[ 4.222899] omap-des 480a5000.des: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000ab2ce000] [size=8 bytes]
[ 4.236785] Modules linked in:
[ 4.239860] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.39-02999-g1bc045a-dirty #182
[ 4.247918] [<c001678c>] (unwind_backtrace) from [<c0012574>] (show_stack+0x10/0x14)
[ 4.255710] [<c0012574>] (show_stack) from [<c05a37e8>] (dump_stack+0x84/0xb8)
[ 4.262977] [<c05a37e8>] (dump_stack) from [<c0046464>] (warn_slowpath_common+0x68/0x8c)
[ 4.271107] [<c0046464>] (warn_slowpath_common) from [<c004651c>] (warn_slowpath_fmt+0x30/0x40)
[ 4.279854] [<c004651c>] (warn_slowpath_fmt) from [<c02d50a4>] (check_unmap+0x710/0x9a0)
[ 4.287991] [<c02d50a4>] (check_unmap) from [<c02d5478>] (debug_dma_unmap_sg+0x90/0x19c)
[ 4.296128] [<c02d5478>] (debug_dma_unmap_sg) from [<c04a77d8>] (omap_des_done_task+0x1cc/0x3e4)
[ 4.304963] [<c04a77d8>] (omap_des_done_task) from [<c004a090>] (tasklet_action+0x84/0x124)
[ 4.313370] [<c004a090>] (tasklet_action) from [<c004a4ac>] (__do_softirq+0xf0/0x20c)
[ 4.321235] [<c004a4ac>] (__do_softirq) from [<c004a840>] (irq_exit+0x98/0xec)
[ 4.328500] [<c004a840>] (irq_exit) from [<c000f9ac>] (handle_IRQ+0x50/0xb0)
[ 4.335589] [<c000f9ac>] (handle_IRQ) from [<c0008688>] (gic_handle_irq+0x28/0x5c)
Removing the duplicate call to dma_unmap_sg().
Cc: stable@vger.kernel.org
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify crypto drivers to use the generic SG helper since
both of them are equivalent and the one from crypto is redundant.
See also:
468577abe3 reverted in
b2ab4a57b0
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dd->total is unsigned so it won't do any good to check for negative
value after subtracting instead of that we should check if the
subtracted value is bigger than him
This was partially found by using a static code analysis program
called cppcheck.
Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync may not always succeed depending on SoC involved.
So handle the error appropriately ensuring usage_count is accurate in
case of failure.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reported-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make omap_des_copy_needed(), omap_des_copy_sgs(), because these
functions are used only in this file.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add omap-des driver with platform data for OMAP4/AM43xx. Support added for DES
ECB and CBC modes. Also add support for 3DES operation where 3 64-bit keys are
used to perform a DES encrypt-decrypt-encrypt (des3_ede) operation on a buffer.
Tests have been conducted with the CRYPTO test manager, and functionality is
verified at different page length alignments.
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers