Use wqe_cnt instead of max which means the queue size of srq, and remove
wqe_ctr which is not used.
Link: https://lore.kernel.org/r/1572952082-6681-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The uar information is already recorded in priv_uar of hns_roce_dev, there
is no need to record it in hns_roce_cq again.
Link: https://lore.kernel.org/r/1572952082-6681-4-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Special QP have no differences with normal qp in data structure, so
definition of struct hns_roce_sqp should be removed and replaced by struct
hns_roce_qp.
Link: https://lore.kernel.org/r/1572952082-6681-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Multiple "if"s and "||" make extension of process_mad() function
as a tedious task, rewrite that function to be more readable.
Link: https://lore.kernel.org/r/20191029062745.7932-14-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change the switch with one case into a simple if statement so the code is
less confusing.
Link: https://lore.kernel.org/r/20191029062745.7932-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers for process_mad allocate MAD structures with proper sizes,
there is no need to recheck it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function always returns 0, so just use void and remove the bogus
checking at the only call site.
Link: https://lore.kernel.org/r/20191029062745.7932-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that MAD output buffer is zero-based allocated in all the callers
of process_mad and remove the various memset()'s from the drivers.
Link: https://lore.kernel.org/r/20191029062745.7932-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Trivial cleanup to fix the following warning:
drivers/infiniband/hw/qib/qib_iba6120.c:1420: warning: bad line:
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20191029062745.7932-15-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Although the mentioned patch fixes a use-after-free bug, it introduces a
hang during shutdown. Since the latter is worse, revert this patch.
Link: https://lore.kernel.org/r/20191101204756.182162-1-bvanassche@acm.org
Reported-by: Honggang Li <honli@redhat.com>
Fixes: 9b64f7d0bb ("RDMA/srpt: Postpone HCA removal until after configfs directory removal")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
srq_desc_size should be rounded up to pow of two before used, or related
calculation may cause allocating wrong size of memory for srq buffer.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1572575610-52530-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Size of pointer to buf field of struct hns_roce_hem_chunk should be
considered when calculating HNS_ROCE_HEM_CHUNK_LEN, or sg table size will
be larger than expected when allocating hem.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1572575610-52530-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Sirong Wang <wangsirong@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Link: https://lore.kernel.org/r/20191028155931.1114-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Link: https://lore.kernel.org/r/20191028155931.1114-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to return always zero for function which is not
supported.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20191028155931.1114-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Improve return code from ib_modify_port() by doing the following:
- Use "-EOPNOTSUPP" instead "-ENOSYS" which is the proper return code
- Allow only fake IB_PORT_CM_SUP manipulation for RoCE providers that
didn't implement the modify_port callback, otherwise return
"-EOPNOTSUPP"
Fixes: 61e0962d52 ("IB: Avoid ib_modify_port() failure for RoCE devices")
Link: https://lore.kernel.org/r/20191028155931.1114-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Normal RDMA WRITE request never returns IB_WC_RNR_RETRY_EXC_ERR to ULPs
because it does not need post receive buffer on the responder side.
Consequently, as an enhancement to normal RDMA WRITE request inside the
hfi1 driver, TID RDMA WRITE request should not return such an error status
to ULPs, although it does receive RNR NAKs from the responder when TID
resources are not available. This behavior is violated when
qp->s_rnr_retry_cnt is set in current hfi1 implementation.
This patch enforces these semantics by avoiding any reaction to the updates
of the RNR QP attributes.
Fixes: 3c6cb20a0d ("IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbs")
Link: https://lore.kernel.org/r/20191025195842.106825.71532.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For a TID RDMA WRITE request, a QP on the responder side could be put into
a queue when a hardware flow is not available. A RNR NAK will be returned
to the requester with a RNR timeout value based on the position of the QP
in the queue. The tid_rdma_flow_wt variable is used to calculate the
timeout value and is determined by using a MTU of 4096 at the module
loading time. This could reduce the timeout value by half from the desired
value, leading to excessive RNR retries.
This patch fixes the issue by calculating the flow weight with the real
MTU assigned to the QP.
Fixes: 07b923701e ("IB/hfi1: Add functions to receive TID RDMA WRITE request")
Link: https://lore.kernel.org/r/20191025195836.106825.77769.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If an hfi1 card is inserted in a Gen4 systems, the driver will avoid the
gen3 speed bump and the card will operate at half speed.
This is because the driver avoids the gen3 speed bump when the parent bus
speed isn't identical to gen3, 8.0GT/s. This is not compatible with gen4
and newer speeds.
Fix by relaxing the test to explicitly look for the lower capability
speeds which inherently allows for gen4 and all future speeds.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20191101192059.106248.1699.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: James Erwin <james.erwin@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the iWARP specific doorbells to the doorbell recovery
mechanism.
Link: https://lore.kernel.org/r/20191030094417.16866-9-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the doorbell recovery mechanism to register rdma related doorbells
that will be restored in case there is a doorbell overflow attention.
Link: https://lore.kernel.org/r/20191030094417.16866-8-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove all functions related to mmap from qedr and use the common API.
Link: https://lore.kernel.org/r/20191030094417.16866-7-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the functions related to managing the mmap_xa database. This code
is now common in ib_core.
Link: https://lore.kernel.org/r/20191030094417.16866-6-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Tested-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the functions related to managing the mmap_xa database. This code
was replaced with common code in ib_core.
Link: https://lore.kernel.org/r/20191030094417.16866-5-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_user_mmap_io interface created a common interface for drivers to
correctly map hw resources and zap them once the ucontext is destroyed
enabling the drivers to safely free the hw resources.
However, this meant the drivers need to delay freeing the resource to the
ucontext destroy phase to ensure they were no longer mapped. The new
mechanism for a common way of handling user/driver address mapping enabled
notifying the driver if all umap_priv mappings were removed, and enabled
freeing the hw resources when they are done with and not delay it until
ucontext destroy.
Since not all drivers use the mechanism, NULL can be sent to the
rdma_user_mmap_io interface to continue working as before. Drivers that
use the mmap_xa interface can pass the entry being mapped to the
rdma_user_mmap_io function to be linked together.
Link: https://lore.kernel.org/r/20191030094417.16866-4-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Create some common API's for adding entries to a xa_mmap. Searching for
an entry and freeing one.
The general approach is copied from the EFA driver and improved to be more
general and do more to help the drivers. Integration with the core allows
a reference counted scheme with a free function so that the driver can
know when its mmaps are all gone.
This significant new functionality will be helpful for drivers to have the
correct lifetime model for mmap objects.
Link: https://lore.kernel.org/r/20191030094417.16866-3-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move functionality that is called by the driver, which is
related to umap, to a new file that will be linked in ib_core.
This is a first step in later enabling ib_uverbs to be optional.
vm_ops is now initialized in ib_uverbs_mmap instead of
priv_init to avoid having to move all the rdma_umap functions
as well.
Link: https://lore.kernel.org/r/20191030094417.16866-2-michal.kalderon@marvell.com
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of deciding a given device is virtual function or
not based on a device is PF or not, use already defined
MLX5_COREDEV_VF by introducing an helper API mlx5_core_is_vf().
This enables to clearly identify PF, VF and non virtual functions.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Linux can run in all sorts of physical machines and VMs where write
combining may or may not be supported. Currently there is no way to
reliably tell if the system supports WC, or not. The driver uses WC to
optimize posting work to the HCA, and getting this wrong in either
direction can cause a significant performance loss.
Add a test in mlx5_ib initialization process to test whether
write-combining is supported on the machine. The test will run as part of
the enable_driver callback to ensure that the test runs after the device
is setup and can create and modify the QP needed, but runs before the
device is exposed to the users.
The test opens UD QP and posts NOP WQEs, the WQE written to the BlueFlame
is different from the WQE in memory, requesting CQE only on the BlueFlame
WQE. By checking whether we received a completion on one of these WQEs we
can know if BlueFlame succeeded and this write-combining must be
supported.
Change reporting of BlueFlame support to be dependent on write-combining
support instead of the FW's guess as to what the machine can do.
Link: https://lore.kernel.org/r/20191027062234.10993-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Returned value from mlx5_mr_cache_alloc() is checked to be error or real
pointer. Return proper error code instead of NULL which is not checked
later.
Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is not the first attempt to fix building random configurations,
unfortunately the attempt in commit a07fc0bb48 ("RDMA/hns: Fix build
error") caused a new problem when CONFIG_INFINIBAND_HNS_HIP06=m and
CONFIG_INFINIBAND_HNS_HIP08=y:
drivers/infiniband/hw/hns/hns_roce_main.o:(.rodata+0xe60): undefined reference to `__this_module'
Revert commits a07fc0bb48 ("RDMA/hns: Fix build error") and
a3e2d4c7e7 ("RDMA/hns: remove obsolete Kconfig comment") to get back to
the previous state, then fix the issues described there differently, by
adding more specific dependencies: INFINIBAND_HNS can now only be built-in
if at least one of HNS or HNS3 are built-in, and the individual back-ends
are only available if that code is reachable from the main driver.
Fixes: a07fc0bb48 ("RDMA/hns: Fix build error")
Fixes: a3e2d4c7e7 ("RDMA/hns: remove obsolete Kconfig comment")
Fixes: dd74282df5 ("RDMA/hns: Initialize the PCI device for hip08 RoCE")
Fixes: 08805fdbeb ("RDMA/hns: Split hw v1 driver from hns roce driver")
Link: https://lore.kernel.org/r/20191007211826.3361202-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe says:
====================
In order to hoist the interval tree code out of the drivers and into the
mmu_notifiers it is necessary for the drivers to not use the interval tree
for other things.
This series replaces the interval tree with an xarray and along the way
re-aligns all the locking to use a sensible SRCU model where the 'update'
step is done by modifying an xarray.
The result is overall much simpler and with less locking in the critical
path. Many functions were reworked for clarity and small details like
using 'imr' to refer to the implicit MR make the entire code flow here
more readable.
This also squashes at least two race bugs on its own, and quite possibily
more that haven't been identified.
====================
Merge conflicts with the odp statistics patch resolved.
* branch 'odp_rework':
RDMA/odp: Remove broken debugging call to invalidate_range
RDMA/mlx5: Do not race with mlx5_ib_invalidate_range during create and destroy
RDMA/mlx5: Do not store implicit children in the odp_mkeys xarray
RDMA/mlx5: Rework implicit ODP destroy
RDMA/mlx5: Avoid double lookups on the pagefault path
RDMA/mlx5: Reduce locking in implicit_mr_get_data()
RDMA/mlx5: Use an xarray for the children of an implicit ODP
RDMA/mlx5: Split implicit handling from pagefault_mr
RDMA/mlx5: Set the HW IOVA of the child MRs to their place in the tree
RDMA/mlx5: Lift implicit_mr_alloc() into the two routines that call it
RDMA/mlx5: Rework implicit_mr_get_data
RDMA/mlx5: Delete struct mlx5_priv->mkey_table
RDMA/mlx5: Use a dedicated mkey xarray for ODP
RDMA/mlx5: Split sig_err MR data into its own xarray
RDMA/mlx5: Use SRCU properly in ODP prefetch
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
invalidate_range() also obtains the umem_mutex which is being held at this
point, so if this path were was ever called it would deadlock. Thus
conclude the debugging never triggers and rework it into a simple WARN_ON
and leave things as they are.
While here add a note to explain how we could possibly get inconsistent
page pointers.
Link: https://lore.kernel.org/r/20191009160934.3143-16-jgg@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For creation, as soon as the umem_odp is created the notifier can be
called, however the underlying MR may not have been setup yet. This would
cause problems if mlx5_ib_invalidate_range() runs. There is some
confusing/ulocked/racy code that might by trying to solve this, but
without locks it isn't going to work right.
Instead trivially solve the problem by short-circuiting the invalidation
if there are not yet any DMA mapped pages. By definition there is nothing
to invalidate in this case.
The create code will have the umem fully setup before anything is DMA
mapped, and npages is fully locked by the umem_mutex.
For destroy, invalidate the entire MR at the HW to stop DMA then DMA unmap
the pages before destroying the MR. This drives npages to zero and
prevents similar racing with invalidate while the MR is undergoing
destruction.
Arguably it would be better if the umem was created after the MR and
destroyed before, but that would require a big rework of the MR code.
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191009160934.3143-15-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These mkeys are entirely internal and are never used by the HW for
page fault. They should also never be used by userspace for prefetch.
Simplify & optimize things by not including them in the xarray.
Since the prefetch path can now never see a child mkey there is no need
for the second synchronize_srcu() during imr destroy.
Link: https://lore.kernel.org/r/20191009160934.3143-14-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use SRCU in a sensible way by removing all MRs in the implicit tree from
the two xarrays (the update operation), then a synchronize, followed by a
normal single threaded teardown.
This is only a little unusual from the normal pattern as there can still
be some work pending in the unbound wq that may also require a workqueue
flush. This is tracked with a single atomic, consolidating the redundant
existing atomics and wait queue.
For understand-ability the entire ODP implicit create/destroy flow now
largely exists in a single pair of functions within odp.c, with a few
support functions for tearing down an unused child.
Link: https://lore.kernel.org/r/20191009160934.3143-13-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the locking is simplified combine pagefault_implicit_mr() with
implicit_mr_get_data() so that we sweep over the idx range only once,
and do the single xlt update at the end, after the child umems are
setup.
This avoids double iteration/xa_loads plus the sketchy failure path if the
xa_load() fails.
Link: https://lore.kernel.org/r/20191009160934.3143-12-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the child MRs are stored in an xarray we can rely on the SRCU
lock to protect the xa_load and use xa_cmpxchg on the slow allocation path
to resolve races with concurrent page fault.
This reduces the scope of the critical section of umem_mutex for implicit
MRs to only cover mlx5_ib_update_xlt, and avoids taking a lock at all if
the child MR is already in the xarray. This makes it consistent with the
normal ODP MR critical section for umem_lock, and the locking approach
used for destroying an unusued implicit child MR.
The MLX5_IB_UPD_XLT_ATOMIC is no longer needed in implicit_get_child_mr()
since it is no longer called with any locks.
Link: https://lore.kernel.org/r/20191009160934.3143-11-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the child leaves are stored in the shared interval tree and
every lookup for a child must be done under the interval tree rwsem.
This is further complicated by dropping the rwsem during iteration (ie the
odp_lookup(), odp_next() pattern), which requires a very tricky an
difficult to understand locking scheme with SRCU.
Instead reserve the interval tree for the exclusive use of the mmu
notifier related code in umem_odp.c and give each implicit MR a xarray
containing all the child MRs.
Since the size of each child is 1GB of VA, a 1 level xarray will index 64G
of VA, and a 2 level will index 2TB, making xarray a much better
data structure choice than an interval tree.
The locking properties of xarray will be used in the next patches to
rework the implicit ODP locking scheme into something simpler.
At this point, the xarray is locked by the implicit MR's umem_mutex, and
read can also be locked by the odp_srcu.
Link: https://lore.kernel.org/r/20191009160934.3143-10-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The single routine has a very confusing scheme to advance to the next
child MR when working on an implicit parent. This scheme can only be used
when working with an implicit parent and must not be triggered when
working on a normal MR.
Re-arrange things by directly putting all the single-MR stuff into one
function and calling it in a loop for the implicit case. Simplify some of
the error handling in the new pagefault_real_mr() to remove unneeded gotos.
Link: https://lore.kernel.org/r/20191009160934.3143-9-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of rewriting all the IOVA's to 0 as things progress down the tree
make the IOVA of the children equal to placement in the tree. This makes
things easier to understand by keeping mmkey.iova == HW configuration.
Link: https://lore.kernel.org/r/20191009160934.3143-8-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This makes the routines easier to understand, particularly with respect
the locking requirements of the entire sequence. The implicit_mr_alloc()
had a lot of ifs specializing it to each of the callers, and only a very
small amount of code was actually shared.
Following patches will cause the flow in the two functions to diverge
further.
Link: https://lore.kernel.org/r/20191009160934.3143-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This function is intended to loop across each MTT chunk in the implicit
parent that intersects the range [io_virt, io_virt+bnct). But it is has a
confusing construction, so:
- Consistently use imr and odp_imr to refer to the implicit parent
to avoid confusion with the normal mr and odp of the child
- Directly compute the inclusive start/end indexes by shifting. This is
clearer to understand the intent and avoids any errors from unaligned
values of addr
- Iterate directly over the range of MTT indexes, do not make a loop
out of goto
- Follow 'success oriented flow', with goto error unwind
- Directly calculate the range of idx's that need update_xlt
- Ensure that any leaf MR added to the interval tree always results in an
update to the XLT
Link: https://lore.kernel.org/r/20191009160934.3143-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a per device xarray storing mkeys that is used to store every
mkey in the system. However, this xarray is now only read by ODP for
certain ODP designated MRs (ODP, implicit ODP, MW, DEVX_INDIRECT).
Create an xarray only for use by ODP, that only contains ODP related
MKeys. This xarray is protected by SRCU and all erases are protected by a
synchronize.
This improves performance:
- All MRs in the odp_mkeys xarray are ODP MRs, so some tests for is_odp()
can be deleted. The xarray will also consume fewer nodes.
- normal MR's are never mixed with ODP MRs in a SRCU data structure so
performance sucking synchronize_srcu() on every MR destruction is not
needed.
- No smp_load_acquire(live) and xa_load() double barrier on read
Due to the SRCU locking scheme care must be taken with the placement of
the xa_store(). Once it completes the MR is immediately visible to other
threads and only through a xa_erase() & synchronize_srcu() cycle could it
be destroyed.
Link: https://lore.kernel.org/r/20191009160934.3143-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The locking model for signature is completely different than ODP, do not
share the same xarray that relies on SRCU locking to support ODP.
Simply store the active mlx5_core_sig_ctx's in an xarray when signature
MRs are created and rely on trivial xarray locking to serialize
everything.
The overhead of storing only a handful of SIG related MRs is going to be
much less than an xarray full of every mkey.
Link: https://lore.kernel.org/r/20191009160934.3143-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When working with SRCU protected xarrays the xarray itself should be the
SRCU 'update' point. Instead prefetch is using live as the SRCU update
point and this prevents switching the locking design to use the xarray
instead.
To solve this the prefetch must only read from the xarray once, and hold
on to the actual MR pointer for the duration of the async
operation. Incrementing num_pending_prefetch delays destruction of the MR,
so it is suitable.
Prefetch calls directly to the pagefault_mr using the MR pointer and only
does a single xarray lookup.
All the testing if a MR is prefetchable or not is now done only in the
prefetch code and removed from the pagefault critical path.
Link: https://lore.kernel.org/r/20191009160934.3143-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl210Z8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGv+kIAKRpO7EuDokQL4qp
hxEEaCMJA1T055EMlNU6FVAq/ZbmapzreUyNYiRMpPWKGTWNMkhIcZQfysYeGZz5
y/KRxAiVxlcB+3v3yRmoZd/XoQmhgvJmqD4zhaGI2Utonow4f/SGSEFFZqqs9WND
4HJROjZHgQ4JBxg9Z+QMo0FxbV/DCZpEOUq51N9WJywyyDRb18zotE83stpU+pE2
fjqT7mk0NLrnYXuDRAbFC1Aau9ed4H6LlwLmxaqxq/Pt5Rz7wIKwKL9HIT4Dm/0a
qpani6phhHWL7MwUpa2wkEonFCD03rJFl3DUVJo64Ijh4up5D/jyXQ+GKV2P4WKJ
275Rb5Q=
=WiZZ
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rc5' into rdma.git for-next
Linux 5.4-rc5
For dependencies in the next patches
Conflict resolved by keeping the delete of the unlock.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change allows the RDMA stack to use physical resource numbers if they
are passed up from the device. This is accomplished by separating the
concept of the QP number from the QP handle. Previously, the two were the
same, as the QP number was exposed to the guest and also used to reference
a virtual QP in the device backend.
With physical resource numbers exposed, the QP number given to the guest
is the number assigned from the physical HCA's QP, while the QP handle is
still the internal handle used to reference a virtual QP. Regardless of
whether the device is exposing physical ids, the driver will still try to
pick up the QP handle from the backend if possible. The MR keys exposed to
the guest will also be the MR keys created by the physical HCA, instead of
virtual MR keys. The distinction between handle and keys is already
present for MRs so there is no need to do anything special here.
A new version of the create QP response has been added to the device API
to pass up the QP number and handle. The driver will also report these to
userspace in the udata response if userspace supports it or not create the
queuepair if not. I also had to do a refactor of the destroy qp code to
reuse it if we fail to copy to userspace.
Link: https://lore.kernel.org/r/20191028181444.19448-1-aditr@vmware.com
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The dma_set_max_seg_size() call in setup_dma_device() does not have any
effect since device->dev.dma_parms is NULL. Fix this by initializing
device->dev.dma_parms first.
Link: https://lore.kernel.org/r/20191025225830.257535-5-bvanassche@acm.org
Fixes: d10bcf947a ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Increase the DMA max_segment_size parameter from 64 KB to 2 GB.
Link: https://lore.kernel.org/r/20191025225830.257535-4-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Increase the DMA max_segment_size parameter from 64 KB to 2 GB.
Link: https://lore.kernel.org/r/20191025225830.257535-3-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not release qp state lock if not previously acquired.
Fixes: cf049bb31f ("RDMA/siw: Fix SQ/RQ drain logic")
Link: https://lore.kernel.org/r/20191025142903.20625-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes: 1dad0ebeea ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Re-design of the iWARP CM related objects reference counting and
synchronization methods, to ensure operations are synchronized correctly
and that memory allocated for "ep" is properly released. Also makes sure
QP memory is not released before ep is finished accessing it.
Where as the QP object is created/destroyed by external operations, the ep
is created/destroyed by internal operations and represents the tcp
connection associated with the QP.
QP destruction flow:
- needs to wait for ep establishment to complete (either successfully or
with error)
- needs to wait for ep disconnect to be fully posted to avoid a race
condition of disconnect being called after reset.
- both the operations above don't always happen, so we use atomic flags to
indicate whether the qp destruction flow needs to wait for these
completions or not, if the destroy is called before these operations
began, the flows will check the flags and not execute them ( connect /
disconnect).
We use completion structure for waiting for the completions mentioned
above.
The QP refcnt was modified to kref object. The EP has a kref added to it
to handle additional worker thread accessing it.
Memory Leaks - https://www.spinics.net/lists/linux-rdma/msg83762.html
Concurrency not managed correctly -
https://www.spinics.net/lists/linux-rdma/msg67949.html
Fixes: de0089e692 ("RDMA/qedr: Add iWARP connection management qp related callbacks")
Link: https://lore.kernel.org/r/20191027200451.28187-4-michal.kalderon@marvell.com
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Reported-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The qpids xarray isn't accessed from irq context and therefore there
is no need to use the xa_XXX_irq version of the apis.
Remove the _irq.
Fixes: b6014f9e5f ("qedr: Convert qpidr to XArray")
Link: https://lore.kernel.org/r/20191027200451.28187-3-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There was a missing initialization for the srqs xarray.
SRQs xarray can also be called from irq context when searching
for an element and uses the xa_XXX_irq apis, therefore should
be initialized with IRQ flags.
Fixes: 9fd15987ed ("qedr: Convert srqidr to XArray")
Link: https://lore.kernel.org/r/20191027200451.28187-2-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the error return path when the call to function
dev->dfx->query_cqc_info fails will leak object 'context'. Fix this by
making the error return path via 'err' return return codes rather than
-EMSGSIZE, set ret appropriately for all error return paths and for the
memory leak now return via 'err' rather than just returning without
freeing context.
Link: https://lore.kernel.org/r/20191024131034.19989-1-colin.king@canonical.com
Addresses-Coverity: ("Resource leak")
Fixes: e1c9a0dc29 ("RDMA/hns: Dump detailed driver-specific CQ")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
qpc/cqc timer entry size needs one page, but currently they are fixedly
configured to 4096, which is not appropriate in 64K page scenarios. So
they should be modified to PAGE_SIZE.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1571908917-16220-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
SRQ's page size configuration of BA and buffer should depend on current
PAGE_SHIFT, or it can't work in scenario of 64K page.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unlike the iSCSI target driver, for the SRP target driver it is sufficient
if a single TPG can be associated with each RDMA port name. However, users
started associating multiple TPGs with RDMA port names. Support this by
converting the single TPG in struct srpt_port_id into a list. This patch
fixes the following list corruption issue:
list_add corruption. prev->next should be next (ffffffffc0a080c0), but was ffffa08a994ce6f0. (prev=ffffa08a994ce6f0).
WARNING: CPU: 2 PID: 2597 at lib/list_debug.c:28 __list_add_valid+0x6a/0x70
CPU: 2 PID: 2597 Comm: targetcli Not tainted 5.4.0-rc1.3bfa3c9602a7 #1
RIP: 0010:__list_add_valid+0x6a/0x70
Call Trace:
core_tpg_register+0x116/0x200 [target_core_mod]
srpt_make_tpg+0x3f/0x60 [ib_srpt]
target_fabric_make_tpg+0x41/0x290 [target_core_mod]
configfs_mkdir+0x158/0x3e0
vfs_mkdir+0x108/0x1a0
do_mkdirat+0x77/0xe0
do_syscall_64+0x55/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Link: https://lore.kernel.org/r/20191023204106.23326-1-bvanassche@acm.org
Reported-by: Honggang LI <honli@redhat.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
HNS redefined available in bits.h define and didn't use it, we can safely
delete it.
Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "ucmd->log_sq_bb_count" variable is a user controlled variable in the
0-255 range. If we shift more than then number of bits in an int then
it's undefined behavior (it shift wraps), and potentially the int could
become negative.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20190608092514.GC28890@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Add Mellanox to lust of copyright holders and replace copyright
boilerplate with relevant SPDX tag.
Link: https://lore.kernel.org/r/20191020071559.9743-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a specific define keyword to check if define exists or not,
let's use it instead of open-coded variant.
Link: https://lore.kernel.org/r/20191020071559.9743-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Function cm_is_active_peer is not used, delete it.
Link: https://lore.kernel.org/r/20191020071559.9743-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When rdmacm module is not loaded, and when netlink message is received to
get char device info, it results into a deadlock due to recursive locking
of rdma_nl_mutex with the below call sequence.
[..]
rdma_nl_rcv()
mutex_lock()
[..]
rdma_nl_rcv_msg()
ib_get_client_nl_info()
request_module()
iw_cm_init()
rdma_nl_register()
mutex_lock(); <- Deadlock, acquiring mutex again
Due to above call sequence, following call trace and deadlock is observed.
kernel: __mutex_lock+0x35e/0x860
kernel: ? __mutex_lock+0x129/0x860
kernel: ? rdma_nl_register+0x1a/0x90 [ib_core]
kernel: rdma_nl_register+0x1a/0x90 [ib_core]
kernel: ? 0xffffffffc029b000
kernel: iw_cm_init+0x34/0x1000 [iw_cm]
kernel: do_one_initcall+0x67/0x2d4
kernel: ? kmem_cache_alloc_trace+0x1ec/0x2a0
kernel: do_init_module+0x5a/0x223
kernel: load_module+0x1998/0x1e10
kernel: ? __symbol_put+0x60/0x60
kernel: __do_sys_finit_module+0x94/0xe0
kernel: do_syscall_64+0x5a/0x270
kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe
process stack trace:
[<0>] __request_module+0x1c9/0x460
[<0>] ib_get_client_nl_info+0x5e/0xb0 [ib_core]
[<0>] nldev_get_chardev+0x1ac/0x320 [ib_core]
[<0>] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core]
[<0>] rdma_nl_rcv+0xcd/0x120 [ib_core]
[<0>] netlink_unicast+0x179/0x220
[<0>] netlink_sendmsg+0x2f6/0x3f0
[<0>] sock_sendmsg+0x30/0x40
[<0>] ___sys_sendmsg+0x27a/0x290
[<0>] __sys_sendmsg+0x58/0xa0
[<0>] do_syscall_64+0x5a/0x270
[<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
To overcome this deadlock and to allow multiple netlink messages to
progress in parallel, following scheme is implemented.
1. Split the lock protecting the cb_table into a per-index lock, and make
it a rwlock. This lock is used to ensure no callbacks are running after
unregistration returns. Since a module will not be registered once it
is already running callbacks, this avoids the deadlock.
2. Use smp_store_release() to update the cb_table during registration so
that no lock is required. This avoids lockdep problems with thinking
all the rwsems are the same lock class.
Fixes: 0e2d00eb6f ("RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoload")
Link: https://lore.kernel.org/r/20191015080733.18625-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The counter resource should return -EAGAIN if it was requested for a
different port, this is similar to how QP works if the users provides a
port filter.
Otherwise port filtering in netlink will return broken counter nests.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/20191020062800.8065-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB devices are allocated with kzalloc and don't need explicit zero
assignments for their parameters. It can be removed safely.
Link: https://lore.kernel.org/r/20191020055724.7410-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PID information can disappear asynchronously because the task can be
killed and moved to zombie state. In this case, PID will be zero in
similar way to the kernel tasks. Recognize such situation where we are
asking to return orphaned object and simply skip filling PID attribute.
As part of this change, document the same scenario in counter.c code.
Link: https://lore.kernel.org/r/20191010071105.25538-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB resources are bounded to IB device and file descriptors, both entities
are unaware to PID namespaces and to task lifetime.
The difference in model caused to unpredictable behavior for the following
scenario:
1. Create FD and context
2. Share it with ephemeral child
3. Create any object and exit that child
The end result of this flow, that those newly created objects will be
tracked by restrack, but won't be visible for users because task_struct
associated with them already exited.
The right thing is to rely on net namespace only for any filtering
purposes and drop PID namespace.
Link: https://lore.kernel.org/r/20191010071105.25538-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When IB device is undergoing unregistration, the GID cache is always
cleaned up after all clients are unregistered with the below flow.
__ib_unregister_device()
disable_device()
ib_cache_cleanup_one()
gid_table_cleanup_one()
cleanup_gid_table_port()
There is no use in generating a GID change event at this stage, where
there is no active client of the device and device is nearly unregistered.
Link: https://lore.kernel.org/r/20191020065427.8772-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is little value in keeping separate function for one flag, provide
it directly like any other mlx5 define.
Link: https://lore.kernel.org/r/20191020064400.8344-2-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the
dead code.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Link: https://lore.kernel.org/r/20191020064454.8551-1-leon@kernel.org
Signed-off-by: Ran Rozenstein <ranro@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All current callers for uverbs_copy_to_struct_or_zero() already check that
the attribute exists, but it make sense to verify the result like the
other functions do.
Link: https://lore.kernel.org/r/20191018081533.8544-1-hslester96@gmail.com
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a macvlan netdevice is used for RoCE, consider the tos->prio->tc
mapping as SL using its lower netdevice.
1. If the lower netdevice is a VLAN netdevice, consider the VLAN netdevice
and it's parent netdevice for mapping
2. If the lower netdevice is not a VLAN netdevice, consider tc mapping
directly from the lower netdevice
Link: https://lore.kernel.org/r/20191015072058.17347-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show
mr' dump.
For example:
$ rdma -dd resource show mr
dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000
pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit
For non-ODP MRs, we won't print "drv_odp ..." at all.
Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
So far res_get_common_{dumpit, doit} was using the default resource fill
function which was defined as part of the nldev_fill_res_entry
fill_entries.
Add a fill function pointer as an argument allows us to use different fill
function in case we want to dump different values then 'rdma resource'
flow do, but still use the same existing general resources dumping flow.
Link: https://lore.kernel.org/r/20191016062308.11886-3-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce ODP diagnostic counters and count the following
per MR within IB/mlx5 driver:
1) Page faults:
Total number of faulted pages.
2) Page invalidations:
Total number of pages invalidated by the OS during all
invalidation events. The translations can be no longer
valid due to either non-present pages or mapping changes.
Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.org
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the
UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that:
if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) {
But we don't check if "attr.comp_vector" is negative. It could
potentially lead to an array underflow. My concern would be where
cq->vector is used in the create_cq() function from the cxgb4 driver.
And really "attr.comp_vector" is appears as a u32 to user space so that's
the right type to use.
Fixes: 9ee79fce36 ("IB/core: Add completion queue (cq) object actions")
Link: https://lore.kernel.org/r/20191011133419.GA22905@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add kernel-doc for missing function parameters.
Remove excess kernel-doc descriptions.
Fix expected kernel-doc formatting (use ':' instead of '-' after @funcarg).
../drivers/infiniband/sw/rdmavt/ah.c:138: warning: Excess function parameter 'udata' description in 'rvt_destroy_ah'
../drivers/infiniband/sw/rdmavt/vt.c:698: warning: Function parameter or member 'pkey_table' not described in 'rvt_init_port'
../drivers/infiniband/sw/rdmavt/cq.c:561: warning: Excess function parameter 'rdi' description in 'rvt_driver_cq_init'
../drivers/infiniband/sw/rdmavt/cq.c:575: warning: Excess function parameter 'rdi' description in 'rvt_cq_exit'
../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'qp' not described in 'rvt_add_rnr_timer'
../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'aeth' not described in 'rvt_add_rnr_timer'
../drivers/infiniband/sw/rdmavt/qp.c:2591: warning: Function parameter or member 'qp' not described in 'rvt_stop_rc_timers'
../drivers/infiniband/sw/rdmavt/qp.c:2624: warning: Function parameter or member 'qp' not described in 'rvt_del_timers_sync'
../drivers/infiniband/sw/rdmavt/qp.c:2697: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter_init'
../drivers/infiniband/sw/rdmavt/qp.c:2728: warning: Function parameter or member 'iter' not described in 'rvt_qp_iter_next'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'rdi' not described in 'rvt_qp_iter'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'v' not described in 'rvt_qp_iter'
../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter'
Link: https://lore.kernel.org/r/20191010035240.251184229@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Correct function parameter names (typos or renames).
Add kernel-doc notation for missing function parameters.
../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path'
../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path'
../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns'
../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns'
../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device'
../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device'
../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device'
../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put'
../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued'
Link: https://lore.kernel.org/r/20191010035240.191542461@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add kernel-doc notation for missing function parameters:
../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'conn' not described in 'iser_send_command'
../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'task' not described in 'iser_send_command'
../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'conn' not described in 'iser_send_data_out'
../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'task' not described in 'iser_send_data_out'
../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'hdr' not described in 'iser_send_data_out'
Link: https://lore.kernel.org/r/20191010035240.132033937@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Various kernel-doc fixes:
- fix typos
- don't use /** for internal structs or functions
- fix Return: kernel-doc formatting
- add kernel-doc notation for missing function parameters
../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fmr_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fmr_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'size' not described in 'iser_alloc_fmr_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:221: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fmr_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fastreg_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fastreg_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'size' not described in 'iser_alloc_fastreg_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:338: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fastreg_pool'
../drivers/infiniband/ulp/iser/iser_verbs.c:568: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_release'
../drivers/infiniband/ulp/iser/iser_verbs.c:603: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_terminate'
../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'signal' not described in 'iser_post_send'
../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'ib_conn' not described in 'iser_post_send'
../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'tx_desc' not described in 'iser_post_send'
Link: https://lore.kernel.org/r/20191010035240.070520193@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add missing function parameter descriptions:
../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'flags' not described in '__ib_alloc_pd'
../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'caller' not described in '__ib_alloc_pd'
Link: https://lore.kernel.org/r/20191010035240.011497492@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix kernel-doc warnings (typos or renames) in ib_srpt.h:
../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_guid_id' not described in 'srpt_port'
../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_gid_id' not described in 'srpt_port'
Link: https://lore.kernel.org/r/20191010035239.950150496@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove kernel-doc notation on 4 structs since they are internal and
none of the struct fields/members are described.
This removes 45 kernel-doc warnings.
Link: https://lore.kernel.org/r/20191010035239.818405496@gmail.com
Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lang Cheng