Commit Graph

309 Commits

Author SHA1 Message Date
Kelsey Skunberg 975e1ac173 PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private
These interfaces:

  struct device *pci_get_host_bridge_device(struct pci_dev *dev);
  void pci_put_host_bridge_device(struct device *dev);

are only used in drivers/pci/ and do not need to be seen by the rest of the
kernel.  Move them to drivers/pci/pci.h so they're private to the PCI
subsystem.

Link: https://lore.kernel.org/r/20190724233848.73327-4-skunberg.kelsey@gmail.com
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30 08:45:49 -05:00
Kelsey Skunberg 669696ebbc PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private
These interfaces:

  bool pci_check_pme_status(struct pci_dev *dev);
  void pci_pme_wakeup_bus(struct pci_bus *bus);

are only used in drivers/pci/ and do not need to be seen by the rest of the
kernel.  Move them to drivers/pci/pci.h so they're private to the PCI
subsystem.

Link: https://lore.kernel.org/r/20190724233848.73327-3-skunberg.kelsey@gmail.com
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30 08:45:49 -05:00
Kelsey Skunberg c776dd5019 PCI: Make PCI_PM_* delay times private
These delay time definitions:

  #define PCI_PM_D2_DELAY         200
  #define PCI_PM_D3_WAIT          10
  #define PCI_PM_D3COLD_WAIT      100
  #define PCI_PM_BUS_WAIT         50

are only used in drivers/pci/ and do not need to be seen by the rest of the
kernel.  Move them to drivers/pci/pci.h so they're private to the PCI
subsystem.

Link: https://lore.kernel.org/r/20190724233848.73327-2-skunberg.kelsey@gmail.com
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30 08:45:49 -05:00
Linus Torvalds fb4da215ed pci-v5.3-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl0siFoUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vzi9A//S4jRyyZrgUr88Az0GbgMhE4b3yqc
 uL7om/Sf+443gG6C+aKkZSM/IE9hrbyIKuYq7GGxDkzZ/HkucZo2yIuAHkPgG4ik
 QQYJ8fJsmMq1bUht87c1ZZwGP0++Deq/Ns2+VNy/WBYqKLulnV0DvEEaJgPs9C5D
 ppwccGdo6UghiujBTpE4ddUBjFjjURWqT6wSnMRDQ4EGwfUhG0MWwwHKI4hbBuaL
 N6refuggdYyUUX5FeUOHa6VF6uTnSSAQ75k+40n4nljdayqoumHLskst77o9q5ZI
 oXjdpwgmuEqYhfp03HEA4Xo/bBxiRj76NuTiEMKvPokxjpanwbLrdV0GhF0OIlM0
 rp1NOI1w+vppFrU+rc2gtq+7hYXFmvdhjS29hFLeD91PP36N5d29jW5NVFpm7GCm
 n4TMGAOsu8RB+bNua6ZbZVcDk2EnPgQeIcM0ZPoBtPK19Fg/rScdEU4u/aFE1Y0Q
 C+Ks7D1qCvFpHzl/xAg0oo9v/jFsWef3qnQWOzot964Zz4W4NSVvB9Ox6Vbfj6C4
 v331LJmlPxG8fxBNA3q28FrTxcG1NW6sgo3WY9VoSp/vc0aqaPKhm7sbraTt5IrI
 TwqA/WhnAHv90MQCGFcofANyYTkjPkKk2QBFK6b0suoAmVdwVWWELi1WaZ+HdvgQ
 JP7YpmC2cXcQBPk=
 =ZGxL
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...
2019-07-15 20:44:49 -07:00
Alex Williamson 76bf6a8634 Revert "PCI/IOV: Use VF0 cached config space size for other VFs"
Revert 975bb8b4dc ("PCI/IOV: Use VF0 cached config space size for other
VFs"), which attempted to cache the config space size from the first VF to
re-use for subsequent VFs.

The cached value was determined prior to discovering the PCIe capability on
the VF, which resulted in the first VF reporting the correct config space
size (4K), as it has a special case through pci_cfg_space_size(), while all
the other VFs only reported 256 bytes.  As this was only a performance
optimization, we're better off without it.

Fixes: 975bb8b4dc ("PCI/IOV: Use VF0 cached config space size for other VFs")
Link: https://lore.kernel.org/r/156046663197.29869.3633634445109057665.stgit@gimli.home
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Hao Zheng <yinhe@linux.alibaba.com>
2019-07-03 08:58:19 -05:00
Rafael J. Wysocki b51033e06c PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
In pci_pm_complete() there are checks to decide whether or not to
resume devices that were left in runtime-suspend during the preceding
system-wide transition into a sleep state.  They involve checking the
current power state of the device and comparing it with the power
state of it set before the preceding system-wide transition, but the
platform component of the device's power state is not handled
correctly in there.

Namely, on platforms with ACPI, the device power state information
needs to be updated with care, so that the reference counters of
power resources used by the device (if any) are set to ensure that
the refreshed power state of it will be maintained going forward.

To that end, introduce a new ->refresh_state() platform PM callback
for PCI devices, for asking the platform to refresh the device power
state data and ensure that the corresponding power state will be
maintained going forward, make it invoke acpi_device_update_power()
(for devices with ACPI PM) on platforms with ACPI and make
pci_pm_complete() use it, through a new pci_refresh_power_state()
wrapper function.

Fixes: a0d2a959d3 (PCI: Avoid unnecessary resume after direct-complete)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-27 12:33:26 +02:00
Mika Westerberg c2bf1fc212 PCI: Add missing link delays required by the PCIe spec
Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that
consists of a PCIe switch and two PCIe endpoints:

  +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
                                  +-01.0-[04-36]-- DS hotplug port
                                  +-02.0-[37]----00.0 xHCI controller
                                  \-04.0-[38-6b]-- DS hotplug port

The root port (1b.0) and the PCIe switch downstream ports are all PCIe
gen3 so they support 8GT/s link speeds.

We wait for the PCIe hierarchy to enter D3cold (runtime):

  pcieport 0000:00:1b.0: power state changed by ACPI to D3cold

When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that
we must follow the rules in PCIe 4.0 section 6.6.1.

For the PCIe gen3 ports we are dealing with here, the following applies:

  With a Downstream Port that supports Link speeds greater than 5.0
  GT/s, software must wait a minimum of 100 ms after Link training
  completes before sending a Configuration Request to the device
  immediately below that Port. Software can determine when Link training
  completes by polling the Data Link Layer Link Active bit or by setting
  up an associated interrupt (see Section 6.7.3.3).

Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):

  pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0
  pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0
  pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0

I've instrumented the kernel with additional logging so we can see the
actual delays the kernel performs:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
  pcieport 0000:00:1b.0: waking up bus
  pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:00:1b.0: PME# disabled
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:01:00.0: PME# disabled
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:00.0: PME# disabled
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:01.0: PME# disabled
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: PME# disabled
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:04.0: PME# disabled
  pcieport 0000:02:01.0: PME# enabled
  pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:04.0: PME# enabled
  pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
  ...
  thunderbolt 0000:03:00.0: PME# disabled
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  xhci_hcd 0000:37:00.0: PME# disabled

For the switch upstream port (01:00.0) we wait for 100ms but not taking
into account the DLLLA requirement. We then wait 10ms for D3hot -> D0
transition of the root port and the two downstream hotplug ports. This
means that we deviate from what the spec requires.

Performing the same check for system sleep (s2idle) transitions we can
see following when resuming from s2idle:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0)
  pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001)
  pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702)
  pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001)
  pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00)
  pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400)
  pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
  pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00)
  pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161)
  pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402)
  pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802)
  pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302)
  pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)

This is even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8.  there is a specific _DSM that allows the OS to skip the delays
but this platform does not provide the _DSM and does not go to S3 anyway
so no firmware is involved that could already handle these delays.

In this particular Intel Coffee Lake platform these delays are not
actually needed because there is an additional delay as part of the ACPI
power resource that is used to turn on power to the hierarchy but since
that additional delay is not required by any of standards (PCIe, ACPI)
it is not present in the Intel Ice Lake, for example where missing the
mandatory delays causes pciehp to start tearing down the stack too early
(links are not yet trained).

For this reason, change the PCIe portdrv PM resume hooks so that they
perform the mandatory delays before the downstream component gets
resumed. We perform the delays before port services are resumed because
otherwise pciehp might find that the link is not up (even if it is just
training) and tears-down the hierarchy.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-18 01:40:41 +02:00
Rafael J. Wysocki 0c7376ada9 PCI: PM: Replace pci_dev_keep_suspended() with two functions
The code in pci_dev_keep_suspended() is relatively hard to follow due
to the negative checks in it and in its callers and the function has
a possible side-effect (disabling the PME) which doesn't really match
its role.

For this reason, move the PME disabling from pci_dev_keep_suspended()
to a separate function and change the semantics (and name) of the
rest of it, so that 'true' is returned when the device needs to be
resumed (and not the other way around).  Change the callers of
pci_dev_keep_suspended() accordingly.

While at it, make the code flow in pci_pm_poweroff() reflect the
pci_pm_suspend() more closely to avoid arbitrary differences between
them.

This is a cosmetic change with no intention to alter behavior.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-17 12:30:24 +02:00
Linus Torvalds 414147d99b pci-v5.2-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlzZ/4MUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwmYw/+Mzkkz/zOpzYdsYyy6Xv3qRdn92Kp
 bePOPACdwpUK+HV4qE6EEYBcVZdkO7NMkshA7wIb4VlsE0sVHSPvlybUmTUGWeFd
 CG87YytVOo4K7cAeKdGVwGaoQSeaZX3wmXVGGQtm/T4b63GdBjlNJ/MBuPWDDMlM
 XEis29MTH6xAu3MbT7pp5q+snSzOmt0RWuVpX/U1YcZdhu8fbwfOxj9Jx6slh4+2
 MvseYNNrTRJrMF0o5o83Khx3tAcW8OTTnDJ9+BCrAlE1PId1s/KjzY6nqReBtom9
 CIqtwAlx/wGkRBRgfsmEtFBhkDA05PPilhSy6k2LP8B4A3qBqir1Pd+5bhHG4FIu
 nPPCZjZs2+0DNrZwQv59qIlWsqDFm214WRln9Z7d/VNtrLs2UknVghjQcHv7rP+K
 /NKfPlAuHTI/AFi9pIPFWTMx5J4iXX1hX4LiptE9M0k9/vSiaCVnTS3QbFvp3py3
 VTT9sprzfV4JX4aqS/rbQc/9g4k9OXPW9viOuWf5rYZJTBbsu6PehjUIRECyFaO+
 0gDqE8WsQOtNNX7e5q2HJ/HpPQ+Q1IIlReC+1H56T/EQZmSIBwhTLttQMREL/8af
 Lka3/1SVUi4WG6SBrBI75ClsR91UzE6AK+h9fAyDuR6XJkbysWjkyG6Lmy617g6w
 lb+fQwOzUt4eGDo=
 =4Vc+
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Add _HPX Type 3 settings support, which gives firmware more
     influence over device configuration (Alexandru Gagniuc)

   - Support fixed bus numbers from bridge Enhanced Allocation
     capabilities (Subbaraya Sundeep)

   - Add "external-facing" DT property to identify cases where we
     require IOMMU protection against untrusted devices (Jean-Philippe
     Brucker)

   - Enable PCIe services for host controller drivers that use managed
     host bridge alloc (Jean-Philippe Brucker)

   - Log PCIe port service messages with pci_dev, not the pcie_device
     (Frederick Lawler)

   - Convert pciehp from pciehp_debug module parameter to generic
     dynamic debug (Frederick Lawler)

  Peer-to-peer DMA:

   - Add whitelist of Root Complexes that support peer-to-peer DMA
     between Root Ports (Christian König)

  Native controller drivers:

   - Add PCI host bridge DMA ranges for bridges that can't DMA
     everywhere, e.g., iProc (Srinath Mannam)

   - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
     Chocron)

   - Fix Tegra MSI target allocation so DMA doesn't generate unwanted
     MSIs (Vidya Sagar)

   - Fix of_node reference leaks (Wen Yang)

   - Fix Hyper-V module unload & device removal issues (Dexuan Cui)

   - Cleanup R-Car driver (Marek Vasut)

   - Cleanup Keystone driver (Kishon Vijay Abraham I)

   - Cleanup i.MX6 driver (Andrey Smirnov)

  Significant bug fixes:

   - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
     Paul)

   - Fix Switchtec firmware update performance issue (Wesley Sheng)

   - Work around Pericom switch link retraining erratum (Stefan Mätje)"

* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
  MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
  PCI: pciehp: Remove pointless MY_NAME definition
  PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
  PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
  PCI: pciehp: Log messages with pci_dev, not pcie_device
  PCI: pciehp: Replace pciehp_debug module param with dyndbg
  PCI: pciehp: Remove pciehp_debug uses
  PCI/AER: Log messages with pci_dev, not pcie_device
  PCI/DPC: Log messages with pci_dev, not pcie_device
  PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
  PCI: Replace printk(KERN_INFO) with pr_info(), etc
  PCI: Use dev_printk() when possible
  PCI: Cleanup setup-bus.c comments and whitespace
  PCI: imx6: Allow asynchronous probing
  PCI: dwc: Save root bus for driver remove hooks
  PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
  PCI: dwc: Free MSI in dw_pcie_host_init() error path
  PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
  ...
2019-05-14 10:30:10 -07:00
Jisheng Zhang 31f996efbd PCI/AER: Change pci_aer_init() stub to return void
Commit 60ed982a4e ("PCI/AER: Move internal declarations to
drivers/pci/pci.h") changed pci_aer_init() to return "void", but didn't
change the stub for when CONFIG_PCIEAER isn't enabled.  Change the stub to
match.

Fixes: 60ed982a4e ("PCI/AER: Move internal declarations to drivers/pci/pci.h")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.19+
2019-04-12 09:08:41 -05:00
Lukas Wunner 0fa635aec9 PCI/LINK: Deduplicate bandwidth reports for multi-function devices
If a multi-function device's bandwidth is already limited when it is
enumerated, a message is logged only for function 0.  By contrast, when
downtraining occurs after enumeration, a message is logged for all
functions.  That's because the former uses pcie_report_downtraining(),
whereas the latter uses __pcie_print_link_status() (which doesn't filter
functions != 0).  I am seeing this happen on a MacBookPro9,1 with a GPU
(function 0) and an integrated HDA controller (function 1).

Avoid this incongruence by calling pcie_report_downtraining() in both
cases.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
2019-03-25 17:59:07 -05:00
Alexandru Gagniuc 2209e06f8a PCI: Add missing include to drivers/pci.h
This file makes use of definitions provided in <linux/pci.h>.  This only
compiles when <linux/pci.h> is included beforehand, and creates a nasty
include dependency.  Instead, just include the correct file.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-06 14:55:41 -06:00
Bjorn Helgaas eff81b6f7b Merge branch 'pci/virtualization'
- Cache VF config space size to optimize enumeration of many VFs
    (KarimAllah Ahmed)

  - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

* pci/virtualization:
  PCI/IOV: Remove unnecessary include of <linux/pci-ats.h>
  PCI/IOV: Use VF0 cached config space size for other VFs
2018-10-20 11:45:35 -05:00
KarimAllah Ahmed 975bb8b4dc PCI/IOV: Use VF0 cached config space size for other VFs
Cache the config space size from VF0 and use it for all other VFs instead
of reading it from the config space of each VF.  We assume that it will be
the same across all associated VFs.

This is an optimization when enabling SR-IOV on a device with many VFs.

Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
[bhelgaas: use CONFIG_PCI_IOV (not CONFIG_PCI_ATS)]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-11 11:49:58 -05:00
Mika Westerberg 26ad34d510 PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
In order to have better power management for Thunderbolt PCIe chains,
Windows enables power management for native PCIe hotplug ports if there is
the following ACPI _DSD attached to the root port:

  Name (_DSD, Package () {
      ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
      Package () {
          Package () {"HotPlugSupportInD3", 1}
      }
  })

This is also documented in:

  https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3

Do the same in Linux by introducing new firmware PM callback
(->bridge_d3()) and then implement it for ACPI based systems so that the
above property is checked.

There is one catch, though. The initial pci_dev->bridge_d3 is set before
the root port has ACPI companion bound (the device is not added to the PCI
bus either) so we need to look up the ACPI companion manually in that case
in acpi_pci_bridge_d3().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Keith Busch a6bd101b8f PCI: Unify device inaccessible
Bring surprise removals and permanent failures together so we no longer
need separate flags.  The implementation enforces that error handling will
not be able to override a surprise removal's permanent channel failure.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-02 16:04:40 -05:00
Keith Busch bdb5ac8577 PCI/ERR: Handle fatal error recovery
We don't need to be paranoid about the topology changing while handling an
error.  If the device has changed in a hotplug capable slot, we can rely on
the presence detection handling to react to a changing topology.

Restore the fatal error handling behavior that existed before merging DPC
with AER with 7e9084b367 ("PCI/AER: Handle ERR_FATAL with removal and
re-enumeration of devices").

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-26 14:23:14 -05:00
Keith Busch c4eed62a21 PCI/ERR: Use slot reset if available
The secondary bus reset may have link side effects that a hotplug capable
port may incorrectly react to.  Use the slot specific reset for hotplug
ports, fixing the undesirable link down-up handling during error
recovering.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: fold in
https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com
for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-21 12:18:10 -05:00
Keith Busch 4f802170a8 PCI/DPC: Save and restore config state
This patch provides DPC save and restore capabilities.  This is necessary
for the driver to observe DPC events in the event the configuration space
needs to be restored after a reset.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-20 16:06:27 -05:00
Bjorn Helgaas 3a48dc6fc2 Merge branch 'pci/virtualization'
- To avoid bus errors, enable PASID only if entire path supports End-End
    TLP prefixes (Sinan Kaya)

  - Unify slot and bus reset functions and remove hotplug knowledge from
    callers (Sinan Kaya)

  - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
    fix guest reboot issues (Alex Williamson)

  - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller
    (Bjorn Helgaas)

* pci/virtualization:
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: Rename pci_try_reset_bus() to pci_reset_bus()
  PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions
  PCI: Unify try slot and bus reset API
  PCI: Hide pci_reset_bridge_secondary_bus() from drivers
  IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset
  PCI: Handle error return from pci_reset_bridge_secondary_bus()
  PCI/IOV: Tidy pci_sriov_set_totalvfs()
  PCI: Enable PASID only if entire path supports End-End TLP prefixes

# Conflicts:
#	drivers/pci/hotplug/pciehp_hpc.c
2018-08-15 14:59:06 -05:00
Bjorn Helgaas 5fc054a544 Merge branch 'pci/resource'
- Clean up devm_of_pci_get_host_bridge_resources() resource allocation
    (Jan Kiszka)

  - Fixup resizable BARs after suspend/resume (Christian König)

  - Make "pci=earlydump" generic (Sinan Kaya)

  - Fix ROM BAR access routines to stay in bounds and check for signature
    correctly (Rex Zhu)

* pci/resource:
  PCI: Make pci_get_rom_size() static
  PCI: Add check code for last image indicator not set
  PCI: Avoid accessing memory outside the ROM BAR
  PCI: Make early dump functionality generic
  PCI: Cleanup PCI_REBAR_CTRL_BAR_SHIFT handling
  PCI: Restore resized BAR state on resume
  PCI: Clean up resource allocation in devm_of_pci_get_host_bridge_resources()

# Conflicts:
#	Documentation/admin-guide/kernel-parameters.txt
2018-08-15 14:59:01 -05:00
Bjorn Helgaas c689209be2 Merge branch 'pci/peer-to-peer'
- Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
    peer-to-peer DMA support (we don't have the peer-to-peer support yet;
    this is just one piece) (Logan Gunthorpe)

* pci/peer-to-peer:
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
2018-08-15 14:58:58 -05:00
Bjorn Helgaas a8bcb5e596 Merge branch 'pci/enumeration'
- Work around IDT switch ACS Source Validation erratum (James
    Puthukattukaran)

  - Emit diagnostics for all cases of PCIe Link downtraining (Links
    operating slower than they're capable of) (Alexandru Gagniuc)

  - Skip VFs when configuring Max Payload Size (Myron Stowe)

  - Reduce Root Port Max Payload Size if necessary when hot-adding a device
    below it (Myron Stowe)

* pci/enumeration:
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Check for PCIe Link downtraining
  PCI: Workaround IDT switch ACS Source Validation erratum
2018-08-15 14:58:52 -05:00
Bjorn Helgaas 3c3ab37f4c Merge branch 'pci/aer'
- Decode AER errors with names similar to "lspci" (Tyler Baicar)

  - Expose AER statistics in sysfs (Rajat Jain)

  - Clear AER status bits selectively based on the type of recovery (Oza
    Pawandeep)

  - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
    Gagniuc)

  - Don't clear AER status bits if we're using the "Firmware-First"
    strategy where firmware owns the registers (Alexandru Gagniuc)

* pci/aer:
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition
  PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
  PCI/AER: Clear device status bits during ERR_COR handling
  PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
  PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
  PCI/AER: Factor out ERR_NONFATAL status bit clearing
  PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
  PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
  PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST
  PCI/AER: Add sysfs attributes for rootport cumulative stats
  PCI/AER: Add sysfs attributes to provide AER stats and breakdown
  PCI/AER: Define aer_stats structure for AER capable devices
  PCI/AER: Move internal declarations to drivers/pci/pci.h
  PCI/AER: Adopt lspci names for AER error decoding
  PCI/AER: Expose internal API for obtaining AER information

# Conflicts:
#	drivers/pci/pci.h
2018-08-15 14:58:45 -05:00
Alexandru Gagniuc 2d1ce5ec21 PCI: Check for PCIe Link downtraining
When both ends of a PCIe Link are capable of a higher bandwidth than is
currently in use, the Link is said to be "downtrained".  A downtrained Link
may indicate hardware or configuration problems in the system, but it's
hard to identify such Links from userspace.

Refactor pcie_print_link_status() so it continues to always print PCIe
bandwidth information, as several NIC drivers desire.

Add a new internal __pcie_print_link_status() to emit a message only when a
device's bandwidth is constrained by the fabric and call it from the PCI
core for all devices, which identifies all downtrained Links.  It also
emits messages for a few cases that are technically not downtrained, such
as a x4 device in an open-ended x1 slot.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: changelog, move __pcie_print_link_status() declaration to
drivers/pci/, rename pcie_check_upstream_link() to
pcie_report_downtraining()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-10 12:29:04 -05:00
Logan Gunthorpe 73c47ddef2 PCI: Add device-specific ACS Redirect disable infrastructure
Intel Sunrise Point (SPT) PCH hardware has an implementation of the ACS
bits that does not comply with the PCIe standard.  To deal with this we
need device-specific quirks to disable ACS redirection.

Add a new pci_dev_specific_disable_acs_redir() quirk and a new
.disable_acs_redir() function pointer for use by non-compliant devices.  No
functional change intended.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
[bhelgaas: split to separate patch, move
pci_dev_specific_disable_acs_redir() declarations to drivers/pci/pci.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-09 17:48:28 -05:00
Bjorn Helgaas bd2e9567db PCI: Hide ACS quirk declarations inside PCI core
Move declarations for these functions:

  pci_dev_specific_acs_enabled()
  pci_dev_specific_enable_acs()

from include/linux/pci.h to drivers/pci/pci.h because nothing outside the
PCI core needs to use them.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-09 16:19:52 -05:00
Hari Vyas 44bda4b7d2 PCI: Fix is_added/is_busmaster race condition
When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.

When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.

is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.

A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.

Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master().  As these fields are not
handled atomically, that clears the is_added bit.

Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state.  This avoids the
race because is_added no longer shares a memory location with is_busmaster.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31 11:27:54 -05:00
Oza Pawandeep ec752f5d54 PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
Clear the device status bits while handling both ERR_FATAL and ERR_NONFATAL
cases.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: rename to pci_aer_clear_device_status(), declare internal to PCI
core instead of exposing it everywhere]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20 15:27:11 -05:00
Bjorn Helgaas 7ab92e89bf PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
During recovery from fatal errors, we previously called
pci_cleanup_aer_uncorrect_error_status(), which cleared *all* uncorrectable
error status bits (both ERR_FATAL and ERR_NONFATAL).

Instead, call a new pci_aer_clear_fatal_status() that clears only the
ERR_FATAL bits (as indicated by the PCI_ERR_UNCOR_SEVER register).

Based-on-patch-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20 15:27:07 -05:00
Sinan Kaya 381634cad1 PCI: Hide pci_reset_bridge_secondary_bus() from drivers
Rename pci_reset_bridge_secondary_bus() to pci_bridge_secondary_bus_reset()
and move the declaration from linux/pci.h to drivers/pci.h to be used
internally in PCI directory only.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 18:04:23 -05:00
Rajat Jain 81aa5206f9 PCI/AER: Add sysfs attributes to provide AER stats and breakdown
Add sysfs attributes to provide total and breakdown of the AERs seen,
into different type of correctable, fatal and nonfatal errors:

  /sys/bus/pci/devices/<dev>/aer_dev_correctable
  /sys/bus/pci/devices/<dev>/aer_dev_fatal
  /sys/bus/pci/devices/<dev>/aer_dev_nonfatal

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 16:19:51 -05:00
Rajat Jain db89ccbe52 PCI/AER: Define aer_stats structure for AER capable devices
Define a structure to hold the AER statistics.  There are 2 groups of
statistics: dev_* counters that are to be collected for all AER capable
devices and rootport_* counters that are collected for all (AER capable)
rootports only.  Allocate and free this structure when device is added or
released (thus counters survive the lifetime of the device).

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 16:17:03 -05:00
Rajat Jain 60ed982a4e PCI/AER: Move internal declarations to drivers/pci/pci.h
Since pci_aer_init() and pci_no_aer() are used only internally, move their
declarations to the PCI internal header file.  Also, no one cares about
return value of pci_aer_init(), so make it void.

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 16:17:03 -05:00
Keith Busch 1e4511604d PCI/AER: Expose internal API for obtaining AER information
Export some common AER functions and structures for other PCI core drivers
to use.  Since this is making the function externally visible inside the
PCI core, prepend "aer_" to the function name.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: move AER declarations from linux/aer.h to drivers/pci/pci.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Oza Pawandeep <poza@codeaurora.org>
2018-07-19 16:16:55 -05:00
James Puthukattukaran aa667c6408 PCI: Workaround IDT switch ACS Source Validation erratum
Some IDT switches incorrectly flag an ACS Source Validation error on
completions for config read requests even though PCIe r4.0, sec 6.12.1.1,
says that completions are never affected by ACS Source Validation.  Here's
the text of IDT 89H32H8G3-YC, erratum #36:

  Item #36 - Downstream port applies ACS Source Validation to Completions
  Section 6.12.1.1 of the PCI Express Base Specification 3.1 states that
  completions are never affected by ACS Source Validation.  However,
  completions received by a downstream port of the PCIe switch from a
  device that has not yet captured a PCIe bus number are incorrectly
  dropped by ACS Source Validation by the switch downstream port.

  Workaround: Issue a CfgWr1 to the downstream device before issuing the
  first CfgRd1 to the device.  This allows the downstream device to capture
  its bus number; ACS Source Validation no longer stops completions from
  being forwarded by the downstream port.  It has been observed that
  Microsoft Windows implements this workaround already; however, some
  versions of Linux and other operating systems may not.

When doing the first config read to probe for a device, if the device is
behind an IDT switch with this erratum:

  1. Disable ACS Source Validation if enabled
  2. Wait for device to become ready to accept config accesses (by using
     the Config Request Retry Status mechanism)
  3. Do a config write to the endpoint
  4. Enable ACS Source Validation (if it was enabled to begin with)

The workaround suggested by IDT is basically only step 3, but we don't know
when the device is ready to accept config requests.  That means we need to
do config reads until we receive a non-Config Request Retry Status, which
means we need to disable ACS SV temporarily.

Signed-off-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
[bhelgaas: changelog, clean up whitespace, fold in unused variable fix
from Anders Roxell <anders.roxell@linaro.org>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-12 16:54:35 -05:00
Sinan Kaya 11eb0e0e8d PCI: Make early dump functionality generic
Move early dump functionality into common code so that it is available for
all architectures.  No need to carry arch-specific reads around as the read
hooks are already initialized by the time pci_setup_device() is getting
called during scan.

Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-06-29 20:06:07 -05:00
Jakub Kicinski 38972375ef PCI/IOV: Reset total_VFs limit after detaching PF driver
The TotalVFs register in the SR-IOV capability is the hardware limit on the
number of VFs.  A PF driver can limit the number of VFs further with
pci_sriov_set_totalvfs().  When the PF driver is removed, reset any VF
limit that was imposed by the driver because that limit may not apply to
other drivers.

Before 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"),
pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual
functions", and the nfp driver used that to remove the VF limit when the
driver unloads.

8d85a7a4f2 broke that because instead of removing the VF limit,
pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that
limit persists even if another driver is loaded.

We could fix that by making the nfp driver reset the limit when it unloads,
but it seems more robust to do it in the PCI core instead of relying on the
driver.

The regression scenario is:

  nfp_pci_probe (driver 1)
  ...
  nfp_pci_remove
    pci_sriov_set_totalvfs(pf->pdev, 0)   # limits VFs to 0

  ...
  nfp_pci_probe (driver 2)
    nfp_rtsym_read_le("nfd_vf_cfg_max_vfs")
    # no VF limit from firmware

Now driver 2 is broken because the VF limit is still 0 from driver 1.

Fixes: 8d85a7a4f2 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
[bhelgaas: changelog, rename functions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-29 15:08:52 -05:00
Bjorn Helgaas f03c7aa459 Merge branch 'lorenzo/pci/dwc'
- reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

* lorenzo/pci/dwc:
  PCI: qcom: add runtime pm support to pcie_port
  PCI: qcom: Fix a bitwise vs logical NOT typo
  PCI: dwc: dra7xx: Use devm_ioremap_resource() instead of devm_ioremap()
  PCI: dwc: artpec6: Use devm_ioremap_resource() instead of devm_ioremap()
  misc: pci_endpoint_test: Add DesignWare EP entry
  dt-bindings: PCI: designware: Add support for EP in DesignWare driver
  PCI: dwc: Add support for EP mode
  dt-bindings: PCI: designware: Example update
  PCI: Move private DT related functions into private header
  PCI: dwc: Move CONFIG_PCI depends to menu
  PCI: dwc: Replace magic number by defines
  PCI: dwc: Small computation improvement
  PCI: dwc: Replace lower into upper case characters
  PCI: dwc: Define maximum number of vectors
  PCI: imx6: Remove space before tabs
  PCI: keystone: Do not treat link up message as error

# Conflicts:
#	include/linux/of_pci.h
2018-06-06 16:10:27 -05:00
Oza Pawandeep 0b91439d35 PCI/AER: Pass service type to pcie_do_fatal_recovery()
Pass the service type to pcie_do_fatal_recovery() instead of assuming AER.
We will make DPC also use pcie_do_fatal_recovery(), and it needs to do
things a little differently for AER and DPC.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02 19:29:26 -05:00
Oza Pawandeep 2e28bc84cf PCI/AER: Factor out error reporting to drivers/pci/pcie/err.c
Move the error reporting callbacks from aerdrv_core.c to err.c, where they
can be used by DPC in addition to AER.

As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER.
Moving them to the new err.c means they will now be built under
CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is
unset, update pci_uevent_ers() #ifdef wrapper]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-17 16:48:23 -05:00
Oza Pawandeep 9f5a70f18c PCI: Add generic pcie_wait_for_link() interface
Clients such as hotplug and Downstream Port Containment (DPC) both need to
wait until a link becomes active or inactive.

Add a generic pcie_wait_link_active() interface and use it instead of
duplicating the code.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17 16:44:11 -05:00
Rob Herring 9e2aee80c7 PCI: Move private DT related functions into private header
The functions in linux/of_pci.h are primarily used by host bridge
drivers, so they can be private to drivers/pci/.

The remaining functions are still used mostly in host bridge drivers
that still live in arch specific code. Hopefully someday, those will get
moved into drivers/pci as well.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
2018-05-14 18:09:40 +01:00
Bjorn Helgaas c8afd5ef00 Merge branch 'pci/vpd'
- consolidate VPD code in vpd.c (Bjorn Helgaas)

* pci/vpd:
  PCI/VPD: Move VPD structures to vpd.c
  PCI/VPD: Move VPD quirks to vpd.c
  PCI/VPD: Move VPD sysfs code to vpd.c
  PCI/VPD: Move VPD access code to vpd.c
2018-04-04 13:28:40 -05:00
Bjorn Helgaas a4b88505ac Merge branch 'pci/virtualization'
- probe for device reset support during enumeration instead of runtime
    (Bjorn Helgaas)

  - add ACS quirk for Ampere (née APM) root ports (Feng Kan)

  - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
    Vincent-Cross)

  - protect device restore with device lock (Sinan Kaya)

  - handle failure of FLR gracefully (Sinan Kaya)

  - handle CRS (config retry status) after device resets (Sinan Kaya)

  - skip various config reads for SR-IOV VFs as an optimization (KarimAllah
    Ahmed)

* pci/virtualization:
  PCI/IOV: Add missing prototypes for powerpc pcibios interfaces
  PCI/IOV: Use VF0 cached config registers for other VFs
  PCI/IOV: Skip BAR sizing for VFs
  PCI/IOV: Skip INTx config reads for VFs
  PCI: Wait for device to become ready after secondary bus reset
  PCI: Add a return type for pci_reset_bridge_secondary_bus()
  PCI: Wait for device to become ready after a power management reset
  PCI: Rename pci_flr_wait() to pci_dev_wait() and make it generic
  PCI: Handle FLR failure and allow other reset types
  PCI: Protect restore with device lock to be consistent
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
  PCI: Add ACS quirk for Ampere root ports
  PCI: Remove redundant probes for device reset support
  PCI: Probe for device reset support during enumeration

Conflicts:
	include/linux/pci.h
2018-04-04 13:28:26 -05:00
Bjorn Helgaas 64ae499cf2 Merge branch 'pci/portdrv'
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
    Lawler)

  - merge pcieport_if.h into portdrv.h (Bjorn Helgaas)

  - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
    Helgaas)

  - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)

  - remove portdrv link order dependency (Bjorn Helgaas)

  - remove support for unused VC portdrv service (Bjorn Helgaas)

  - simplify portdrv feature permission checking (Bjorn Helgaas)

  - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
    Helgaas)

  - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)

  - use cached AER capability offset (Frederick Lawler)

  - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)

  - rename pcie-dpc.c to dpc.c (Bjorn Helgaas)

* pci/portdrv:
  PCI/DPC: Rename from pcie-dpc.c to dpc.c
  PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS
  PCI/AER: Use cached AER Capability offset
  PCI/portdrv: Rename and reverse sense of pcie_ports_auto
  PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver
  PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter
  PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter
  PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h>
  PCI/portdrv: Simplify PCIe feature permission checking
  PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC
  PCI/portdrv: Remove pcie_port_bus_type link order dependency
  PCI/portdrv: Disable port driver in compat mode
  PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors
  PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver
  PCI/PM: Move pcie_clear_root_pme_status() to core
  PCI/portdrv: Merge pcieport_if.h into portdrv.h
  PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/

Conflicts:
	drivers/pci/pcie/Makefile
	drivers/pci/pcie/portdrv.h
2018-04-04 13:27:58 -05:00
KarimAllah Ahmed cf0921bea6 PCI/IOV: Use VF0 cached config registers for other VFs
Cache some config data from VF0 and use it for all other VFs instead of
reading it from the config space of each VF.  We assume these items are the
same across all associated VFs:

   Revision ID
   Class Code
   Subsystem Vendor ID
   Subsystem ID

This is an optimization when enabling SR-IOV on a device with many VFs.

Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
[bhelgaas: changelog, simplify comments, remove unused "device", test
CONFIG_PCI_IOV instead of CONFIG_PCI_ATS, rename functions]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-03-31 15:32:43 -05:00
Tal Gilboa b852f63aa6 PCI: Add pcie_bandwidth_capable() to compute max supported link bandwidth
Add pcie_bandwidth_capable() to compute the max link bandwidth supported by
a device, based on the max link speed and width, adjusted by the encoding
overhead.

The maximum bandwidth of the link is computed as:

  max_link_width * max_link_speed * (1 - encoding_overhead)

2.5 and 5.0 GT/s links use 8b/10b encoding, which reduces the raw bandwidth
available by 20%; 8.0 GT/s and faster links use 128b/130b encoding, which
reduces it by about 1.5%.

The result is in Mb/s, i.e., megabits/second, of raw bandwidth.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: add 16 GT/s, adjust for pcie_get_speed_cap() and
pcie_get_width_cap() signatures, don't export outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30 15:33:38 -05:00
Tal Gilboa c70b65fb7f PCI: Add pcie_get_width_cap() to find max supported link width
Add pcie_get_width_cap() to find the max link width supported by a device.
Change max_link_width_show() to use pcie_get_width_cap().

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: return width directly instead of error and *width, don't export
outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-03-30 15:33:38 -05:00
Tal Gilboa 6cf57be0f7 PCI: Add pcie_get_speed_cap() to find max supported link speed
Add pcie_get_speed_cap() to find the max link speed supported by a device.
Change max_link_speed_show() to use pcie_get_speed_cap().

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: return speed directly instead of error and *speed, don't export
outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-03-30 15:33:38 -05:00
Bjorn Helgaas f9ea894ca5 PCI/VPD: Move VPD structures to vpd.c
The VPD-related structures are only used in vpd.c, so move them from
drivers/pci/pci.h to vpd.c.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:34 -05:00
Bjorn Helgaas b1c615c48f PCI/VPD: Move VPD sysfs code to vpd.c
Move the VPD-related sysfs code from pci-sysfs.c to vpd.c.  This follows
the pattern of pcie_aspm_create_sysfs_dev_files().  The goal is to
encapsulate all the VPD code and structures in vpd.c.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-19 13:06:17 -05:00
Bjorn Helgaas dcb0453d71 PCI/PM: Move pcie_clear_root_pme_status() to core
Move pcie_clear_root_pme_status() from the port driver to the PCI core so
it will be available even when the port driver isn't present.  No
functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-12 09:15:39 -05:00
Bjorn Helgaas 01f095e46b Merge branch 'pci/trivial' into next
* pci/trivial:
  PCI: Clean up whitespace in linux/pci.h, pci/pci.h
  PCI: Tidy up pci/probe.c comments
2018-01-31 10:13:07 -06:00
Bjorn Helgaas 0aa0f5d108 PCI: Clean up whitespace in linux/pci.h, pci/pci.h
Clean up whitespace, capitalization, etc. in comments.  No functional
change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18 23:08:44 -06:00
Bjorn Helgaas 7d8e7d19b0 PCI/ASPM: Unexport internal ASPM interfaces
Several of the interfaces defined in include/linux/pci-aspm.h are used only
internally from the PCI core:

  pcie_aspm_init_link_state()
  pcie_aspm_exit_link_state()
  pcie_aspm_pm_state_change()
  pcie_aspm_powersave_config_link()
  pcie_aspm_create_sysfs_dev_files()
  pcie_aspm_remove_sysfs_dev_files()

Move these to the internal drivers/pci/pci.h header so they don't clutter
the driver interface.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18 23:02:57 -06:00
Linus Torvalds 1b6115fbe3 pci-v4.15-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDFIdAAoJEFmIoMA60/r8Jg4P/3IrmMNVnpqmYEZ7lRSW7UQ3
 8jtupbzIkbPsIAEhbJ7xqO7zKx85j6Og+ZSOv4a8u/tS6cd1aVZu2PpWsTkacez0
 7nLGVCSL3HZi5qcrtOvb2Pmke18SUKSPxVYSgS2ajQavB1oKaY03FbHDWyWidCZx
 qxkeGZOiUDw5kSGkQWyks1WgB0dd76rVbPcrKKEJueGgrdSm+EdgdDv8eT6bZInZ
 uMrCmSjNYTQP0KASCJJvgYOtJbdwvP6NuQTxzOlU2G+H2SqsLRjsz4UUR8FF06T5
 cndpgpG3QSAZLx7wCeWTvRorTEYORzKMoyw/AUjhiGbRep9Zw0aKNvCC99E6xjyD
 FECrk6kCrqZs7l+LVXK4SwpBXCVjNgRoFAHBEKF2X3/SWUkUhHXZHCVvMQB8LQiS
 2p8VRoYWw2aCLkHCGynuzToUrD2P2Pjxe5n/13aYVJkyBNfQqqZ3l2YHiZdpDO3j
 rgG6RW0WCrpZxfb/0WAbPnQ2qpZAwDPO6hOW7dIfTZabFVXRIkBvNq53by/0MxvP
 jyOcMTsq2l8y46f3VgNPUAHj0f52HwfZA3PQRPh+MQDz5385BJklDRWtfVM7cQx9
 IoeGkq1zLLvpOh63he/jnnRELxDvNVcxND8lOkenJlObj9kK63hUEcXg/zEMS4w3
 oetLw9TqE32Jb7GfpVSw
 =j4L3
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - detach driver before tearing down procfs/sysfs (Alex Williamson)

  - disable PCIe services during shutdown (Sinan Kaya)

  - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)

  - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)

  - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)

  - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
    Helgaas)

  - report non-fatal AER errors only to the affected endpoint (Gabriele
    Paoloni)

  - distribute bus numbers, MMIO, and I/O space among hotplug bridges to
    allow more devices to be hot-added (Mika Westerberg)

  - fix pciehp races during initialization and surprise link down (Mika
    Westerberg)

  - handle surprise-removed devices in PME handling (Qiang)

  - support resizable BARs for large graphics devices (Christian König)

  - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
    Sironi)

  - create SR-IOV virtfn/physfn sysfs links before attaching driver
    (Stuart Hayes)

  - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)

  - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)

  - avoid slot reset if bridge itself is broken (Jan Glauber)

  - clean up pci_reset_function() path (Jan H. Schönherr)

  - make pci_map_rom() fail if the option ROM is invalid (Changbin Du)

  - convert timers to timer_setup() (Kees Cook)

  - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)

  - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)

  - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
    declarations (Bjorn Helgaas)

  - fix endpoint framework overflows and BUG()s (Dan Carpenter)

  - fix endpoint framework issues (Kishon Vijay Abraham I)

  - avoid broken Cavium CN8xxx bus reset behavior (David Daney)

  - extend Cavium ACS capability quirks (Vadim Lomovtsev)

  - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)

  - turn off dra7xx clocks cleanly on shutdown (Keerthy)

  - fix Faraday probe error path (Wei Yongjun)

  - support HiSilicon STB SoC PCIe host controller (Jianguo Sun)

  - fix Hyper-V interrupt affinity issue (Dexuan Cui)

  - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
    Kuznetsov)

  - support multiple MSI on iProc (Sandor Bodo-Merle)

  - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
    Zhiqiang)

  - fix Layerscape default error response (Minghuan Lian)

  - support MSI on Tango host controller (Marc Gonzalez)

  - support Tegra186 PCIe host controller (Manikanta Maddireddy)

  - use generic accessors on Tegra when possible (Thierry Reding)

  - support V3 Semiconductor PCI host controller (Linus Walleij)

* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
  PCI/ASPM: Add L1 Substates definitions
  PCI/ASPM: Reformat ASPM register definitions
  PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
  PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
  PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
  PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
  PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
  PCI: Fix kernel-doc build warning
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  PCI: Move PCI_QUIRKS to the PCI bus menu
  alpha/PCI: Make pdev_save_srm_config() static
  PCI: Remove unused declarations
  PCI: Remove redundant pci_dev, pci_bus, resource declarations
  PCI: Remove redundant pcibios_set_master() declarations
  PCI/PME: Handle invalid data when reading Root Status
  PCI: hv: Use effective affinity mask
  PCI: pciehp: Do not clear Presence Detect Changed during initialization
  PCI: pciehp: Fix race condition handling surprise link down
  PCI: Distribute available resources to hotplug-capable bridges
  ...
2017-11-15 15:01:28 -08:00
Bjorn Helgaas 9ceb09cce1 Merge branch 'pci/virtualization' into next
* pci/virtualization:
  PCI: Document reset method return values
  PCI: Detach driver before procfs & sysfs teardown on device remove
  PCI: Apply Cavium ThunderX ACS quirk to more Root Ports
  PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
  PCI: Restore ARI Capable Hierarchy before setting numVFs
  PCI: Create SR-IOV virtfn/physfn links before attaching driver
  PCI: Expose SR-IOV offset, stride, and VF device ID via sysfs
  PCI: Cache the VF device ID in the SR-IOV structure
  PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO
  PCI: Remove unused function __pci_reset_function()
  PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()
2017-11-14 12:11:26 -06:00
Bjorn Helgaas 104d1e40cf Merge branch 'pci/resource' into next
* pci/resource:
  PCI: Fail pci_map_rom() if the option ROM is invalid
  PCI: Move pci_map_rom() error path
  x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)
  PCI: Add pci_resize_resource() for resizing BARs
  PCI: Add resizable BAR infrastructure
  PCI: Add PCI resource type mask #define
2017-11-14 12:11:25 -06:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christian König 276b738deb PCI: Add resizable BAR infrastructure
Add resizable BAR infrastructure, including defines and helper functions to
read the possible sizes of a BAR and update its size.  See PCIe r3.1, sec
7.22.

Link: https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: rename to functions with "rebar" (to match #defines), drop shift
#defines, drop "_MASK" suffixes, fix typos, fix kerneldoc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-10-24 14:40:20 -05:00
Filippo Sironi 3142d832af PCI: Cache the VF device ID in the SR-IOV structure
Cache the VF device ID in the SR-IOV structure and use it instead of
reading it over and over from the PF config space capability.

Signed-off-by: Filippo Sironi <sironi@amazon.de>
[bhelgaas: rename to "vf_device" to match pci_dev->device]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05 15:54:58 -05:00
Bhumika Goyal 69f2dc24ff PCI: Constify pci_dev_type structure
Make this const as it not modified in the file referencing it.  It is only
stored in a const field 'type' of a device structure.  Also, add const to
the variable declaration in the header file.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05 15:53:31 -05:00
Sinan Kaya 62ce94a7a5 PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken
Per PCIe r3.1, sec 2.2.6.2 and 7.8.4, a Requester may not use 8-bit Tags
unless its Extended Tag Field Enable is set, but all Receivers/Completers
must handle 8-bit Tags correctly regardless of their Extended Tag Field
Enable.

Some devices do not handle 8-bit Tags as Completers, so add a quirk for
them.  If we find such a device, we disable Extended Tags for the entire
hierarchy to make peer-to-peer DMA possible.

The Broadcom HT2100 seems to have issues with handling 8-bit tags.  Mark it
as broken.

The pci_walk_bus() in the quirk handles devices we've enumerated in the
past, and pci_configure_device() handles devices we enumerate in the
future.

Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1467674
Reported-and-tested-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[bhelgaas: changelog, tweak messages, rename bit and quirk]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-31 14:31:22 -05:00
Rafael J. Wysocki ec4b8ddcd3 Merge branch 'pm-pci'
* pm-pci:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration
2017-07-14 13:15:49 +02:00
Rafael J. Wysocki 0ce3fcaff9 PCI / PM: Restore PME Enable after config space restoration
Commit dc15e71eef (PCI / PM: Restore PME Enable if skipping wakeup
setup) introduced a mechanism by which the PME Enable bit can be
restored by pci_enable_wake() if dev->wakeup_prepared is set in
case it has been overwritten by PCI config space restoration.

However, that commit overlooked the fact that on some systems (Dell
XPS13 9360 in particular) the AML handling wakeup events checks PME
Status and PME Enable and it won't trigger a Notify() for devices
where those bits are not set while it is running.

That happens during resume from suspend-to-idle when pci_restore_state()
invoked by pci_pm_default_resume_early() clears PME Enable before the
wakeup events are processed by AML, effectively causing those wakeup
events to be ignored.

Fix this issue by restoring the PME Enable configuration right after
pci_restore_state() has been called instead of doing that in
pci_enable_wake().

Fixes: dc15e71eef (PCI / PM: Restore PME Enable if skipping wakeup setup)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-12 23:09:21 +02:00
Linus Torvalds f263fbb8d6 pci-v4.13-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZYAFUAAoJEFmIoMA60/r8cFQP/A4fpdjhd42WRNQXGTpZieop
 i40lBQtGdBn/UY97U6BoutcS1ygDi9OiSzg+IR6I90iMgidqyUHFhe4hGWgVHD2g
 Tg0KLzd+lKKfQ6Gqt1P6t4dLGLvyEj5NUbCeFE4XYODAUkkiBaOndax6DK1GvU54
 Vjuj63rHtMKFR/tG/4iFTigObqyI8QE6O9JVxwuvIyEX6RXKbJe+wkulv5taSnWt
 Ne94950i10MrELtNreVdi8UbCbXiqjg0r5sKI/WTJ7Bc7WsC7X5PhWlhcNrbHyBT
 Ivhoypkui3Ky8gvwWqL0KBG+cRp8prBXAdabrD9wRbz0TKnfGI6pQzseCGRnkE6T
 mhlSJpsSNIHaejoCjk93yPn5oRiTNtPMdVhMpEQL9V/crVRGRRmbd7v2TYvpMHVR
 JaPZ8bv+C2aBTY8uL3/v/rgrjsMKOYFeaxeNklpErxrknsbgb6BgubmeZXDvTBVv
 YUIbAkvveonUKisv+kbD8L7tp1+jdbRUT0AikS0NVgAJQhfArOmBcDpTL9YC51vE
 feFhkVx4A32vvOm7Zcg9A7IMXNjeSfccKGw3dJOAvzgDODuJiaCG6S0o7B5Yngze
 axMi87ixGT4QM98z/I4MC8E9rDrJdIitlpvb6ZBgiLzoO3kmvsIZZKt8UxWqf5r8
 w3U2HoyKH13Qbkn1xkum
 =mkyb
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...
2017-07-08 15:51:57 -07:00
Rafael J. Wysocki 0847684cfc PCI / PM: Simplify device wakeup settings code
After previous changes it is not necessary to distinguish between
device wakeup for run time and device wakeup from system sleep states
any more, so rework the PCI device wakeup settings code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-28 01:52:45 +02:00
Jakub Kicinski 17530e71e0 PCI: Protect pci_driver->sriov_configure() usage with device_lock()
Every method in struct device_driver or structures derived from it like
struct pci_driver MUST provide exclusion vs the driver's ->remove() method,
usually by using device_lock().

Protect use of pci_driver->sriov_configure() by holding the device lock
while calling it.

The PCI core sets the pci_dev->driver pointer in local_pci_probe() before
calling ->probe() and only clears it after ->remove().  This means driver's
->sriov_configure() callback will happily race with probe() and remove(),
most likely leading to BUGs, since drivers don't expect this.

Remove the iov lock completely, since we remove the last user.

[bhelgaas: changelog, thanks to Christoph for locking rule]
Link: http://lkml.kernel.org/r/20170522225023.14010-1-jakub.kicinski@netronome.com
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-14 17:41:19 -05:00
Linus Torvalds 857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Bjorn Helgaas ef1b5dad5a Merge branch 'pci/virtualization' into next
* pci/virtualization:
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: Call pcie_flr() from reset_chelsio_generic_dev()
  PCI: Call pcie_flr() from reset_intel_82599_sfp_virtfn()
  PCI: Export pcie_flr()
  PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
  PCI: Avoid FLR for Intel 82579 NICs

Conflicts:
	include/linux/pci.h
2017-04-28 10:36:12 -05:00
Bjorn Helgaas 889e4dd916 Merge branch 'pci/resource-mmap' into next
* pci/resource-mmap:
  ia64: Use generic pci_mmap_resource_range()
  ia64: Remove redundant checks for WC in pci_mmap_page_range()
  ia64: Remove redundant valid_mmap_phys_addr_range() from pci_mmap_page_range()
  PCI: Add I/O BAR support to generic pci_mmap_resource_range()
  x86/PCI: Use generic pci_mmap_resource_range()
  unicore32/PCI: Use generic pci_mmap_resource_range()
  sh/PCI: Use generic pci_mmap_resource_range()
  parisc: Use generic pci_mmap_resource_range()
  mn10300/PCI: Use generic pci_mmap_resource_range()
  MIPS: PCI: Use generic pci_mmap_resource_range()
  cris/PCI: Use generic pci_mmap_resource_range()
  ARM/PCI: Use generic pci_mmap_resource_range()
  PCI: Add pci_mmap_resource_range() and use it for ARM64
  PCI: Add BAR index argument to pci_mmap_page_range()
  PCI: Use BAR index in sysfs attr->private instead of resource pointer
  PCI: Add arch_can_pci_mmap_io() on architectures which can mmap() I/O space
  PCI: Move multiple declarations of pci_mmap_page_range() to <linux/pci.h>
  PCI: Add arch_can_pci_mmap_wc() macro
  xtensa/PCI: Do not mmap PCI BARs to userspace as write-through
  PCI: Only allow WC mmap on prefetchable resources
  PCI: Fix another sanity check bug in /proc/pci mmap
  PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
2017-04-28 10:34:34 -05:00
Bodong Wang 0e7df22401 PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding
Sometimes it is not desirable to bind SR-IOV VFs to drivers.  This can save
host side resource usage by VF instances that will be assigned to VMs.

Add a new PCI sysfs interface "sriov_drivers_autoprobe" to control that
from the PF.  To modify it, echo 0/n/N (disable probe) or 1/y/Y (enable
probe) to:

  /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe

Note that this must be done before enabling VFs.  The change will not take
effect if VFs are already enabled.  Simply, one can disable VFs by setting
sriov_numvfs to 0, choose whether to probe or not, and then re-enable the
VFs by restoring sriov_numvfs.

[bhelgaas: changelog, ABI doc]
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-04-20 08:53:51 -05:00
David Woodhouse f719582435 PCI: Add pci_mmap_resource_range() and use it for ARM64
Starting to leave behind the legacy of the pci_mmap_page_range() interface
which takes "user-visible" BAR addresses.  This takes just the resource and
offset.

For now, both APIs coexist and depending on the platform, one is
implemented as a wrapper around the other.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20 08:47:47 -05:00
Lukas Wunner 8531e283be PCI: Recognize Thunderbolt devices
Detect on probe whether a PCI device is part of a Thunderbolt controller.
Intel uses a Vendor-Specific Extended Capability (VSEC) with ID 0x1234
on such devices.  Detect presence of this VSEC and cache it in a newly
added is_thunderbolt bit in struct pci_dev.

Also, add a helper to check whether a given PCI device is situated on a
Thunderbolt daisy chain (i.e., below a PCI device with is_thunderbolt
set).

The necessity arises from the following:

* If an external Thunderbolt GPU is connected to a dual GPU laptop,
  that GPU is currently registered with vga_switcheroo even though it
  can neither drive the laptop's panel nor be powered off by the
  platform.  To vga_switcheroo it will appear as if two discrete
  GPUs are present.  As a result, when the external GPU is runtime
  suspended, vga_switcheroo will cut power to the internal discrete GPU
  which may not be runtime suspended at all at this moment.  The
  solution is to not register external GPUs with vga_switcheroo, which
  necessitates a way to recognize if they're on a Thunderbolt daisy
  chain.

* Dual GPU MacBook Pros introduced 2011+ can no longer switch external
  DisplayPort ports between GPUs.  (They're no longer just used for DP
  but have become combined DP/Thunderbolt ports.)  The driver to switch
  the ports, drivers/platform/x86/apple-gmux.c, needs to detect presence
  of a Thunderbolt controller and, if found, keep external ports
  permanently switched to the discrete GPU.

v2: Make kerneldoc for pci_is_thunderbolt_attached() more precise,
    drop portion of commit message pertaining to separate series.
    (Bjorn Helgaas)

Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Amir Levy <amir.jer.levy@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/0ab165a4a35c0b60f29d4c306c653ead14fcd8f9.1489145162.git.lukas@wunner.de
2017-03-30 22:42:30 +02:00
Keith Busch 89ee9f7680 PCI: Add device disconnected state
Add a new state to pci_dev to be set when it is unexpectedly disconnected.
The PCI driver tear down functions can observe this new device state so
they may skip operations that will fail.

The pciehp and pcie-dpc drivers are aware when the link is down, so these
set the flag when their handlers detect the device is disconnected.

Tested-by: Krishna Dhulipala <krishnad@fb.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-29 22:54:46 -05:00
Emil Tantilov 5b0948dfe1 PCI: Lock each enable/disable num_vfs operation in sysfs
Enabling/disabling SRIOV via sysfs by echo-ing multiple values
simultaneously:

  # echo 63 > /sys/class/net/ethX/device/sriov_numvfs&
  # echo 63 > /sys/class/net/ethX/device/sriov_numvfs

  # sleep 5

  # echo 0 > /sys/class/net/ethX/device/sriov_numvfs&
  # echo 0 > /sys/class/net/ethX/device/sriov_numvfs

results in the following bug:

  kernel BUG at drivers/pci/iov.c:495!
  invalid opcode: 0000 [#1] SMP
  CPU: 1 PID: 8050 Comm: bash Tainted: G   W   4.9.0-rc7-net-next #2092
  RIP: 0010:[<ffffffff813b1647>]
	    [<ffffffff813b1647>] pci_iov_release+0x57/0x60

  Call Trace:
   [<ffffffff81391726>] pci_release_dev+0x26/0x70
   [<ffffffff8155be6e>] device_release+0x3e/0xb0
   [<ffffffff81365ee7>] kobject_cleanup+0x67/0x180
   [<ffffffff81365d9d>] kobject_put+0x2d/0x60
   [<ffffffff8155bc27>] put_device+0x17/0x20
   [<ffffffff8139c08a>] pci_dev_put+0x1a/0x20
   [<ffffffff8139cb6b>] pci_get_dev_by_id+0x5b/0x90
   [<ffffffff8139cca5>] pci_get_subsys+0x35/0x40
   [<ffffffff8139ccc8>] pci_get_device+0x18/0x20
   [<ffffffff8139ccfb>] pci_get_domain_bus_and_slot+0x2b/0x60
   [<ffffffff813b09e7>] pci_iov_remove_virtfn+0x57/0x180
   [<ffffffff813b0b95>] pci_disable_sriov+0x65/0x140
   [<ffffffffa00a1af7>] ixgbe_disable_sriov+0xc7/0x1d0 [ixgbe]
   [<ffffffffa00a1e9d>] ixgbe_pci_sriov_configure+0x3d/0x170 [ixgbe]
   [<ffffffff8139d28c>] sriov_numvfs_store+0xdc/0x130
  ...
  RIP  [<ffffffff813b1647>] pci_iov_release+0x57/0x60

Use the existing mutex lock to protect each enable/disable operation.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
2017-02-03 13:42:38 -06:00
Bjorn Helgaas 2583157141 Merge branch 'pci/virtualization' into next
* pci/virtualization:
  PCI: Add comments about ROM BAR updating
  PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
  PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
  PCI: Don't update VF BARs while VF memory space is enabled
  PCI: Separate VF BAR updates from standard BAR updates
  PCI: Update BARs using property bits appropriate for type
  PCI: Ignore BAR updates on virtual functions
  PCI: Do any VF BAR updates before enabling the BARs
  PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+
  PCI: Convert Mellanox broken INTx quirks to be for listed devices only
  PCI: Convert broken INTx masking quirks from HEADER to FINAL
  net/mlx4_core: Use device ID defines
  PCI: Add Mellanox device IDs
2016-12-12 11:25:05 -06:00
Bjorn Helgaas daaed10443 Merge branch 'pci/pm' into next
* pci/pm:
  x86/platform/intel-mid: Constify mid_pci_platform_pm
  PCI: pciehp: Add runtime PM support for PCIe hotplug ports
  ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public
  ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit
  PCI: Unfold conditions to block runtime PM on PCIe ports
  PCI: Consolidate conditions to allow runtime PM on PCIe ports
  PCI: Activate runtime PM on a PCIe port only if it can suspend
  PCI: Speed up algorithm in pci_bridge_d3_update()
  PCI: Autosense device removal in pci_bridge_d3_update()
  PCI: Don't acquire ref on parent in pci_bridge_d3_update()
  USB: UHCI: report non-PME wakeup signalling for Intel hardware
  PCI: Check for PME in targeted sleep state
2016-12-12 11:25:04 -06:00
Bjorn Helgaas c1f2e80c19 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
  PCI: Expand "VPD access disabled" quirk message
  PCI: pciehp: Remove loading message
  PCI: hotplug: Remove hotplug core message
  PCI: Remove service driver load/unload messages
  PCI/AER: Log AER IRQ when claiming Root Port
  PCI/AER: Log errors with PCI device, not PCIe service device
  PCI/AER: Remove unused version macros
  PCI/PME: Log PME IRQ when claiming Root Port
  PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors
  PCI: Move config space size macros to pci_regs.h
2016-12-12 11:25:03 -06:00
Wang Sheng-Hui cc10385b6f PCI: Move config space size macros to pci_regs.h
Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and
PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to
include/uapi/linux/pci_regs.h so they can be used by more drivers and
eliminate duplicate definitions.

[bhelgaas: Expand comment to include PCI-X details]
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12 10:05:22 -06:00
Dongdong Liu 169de969c0 PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform
The acpi_get_rc_resources() is used to get the RC register address that can
not be described in MCFG.  It takes the _HID & segment to look for and
outputs the RC address resource.  Use PNP0C02 devices to describe such RC
address resource.  Use _UID to match segment to tell which root bus the
PNP0C02 resource belongs to.

[bhelgaas: add dev argument, wrap in #ifdef CONFIG_PCI_QUIRKS]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06 13:45:49 -06:00
Bjorn Helgaas 286c2378aa PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
pci_std_update_resource() only deals with standard BARs, so we don't have
to worry about the complications of VF BARs in an SR-IOV capability.

Compute the BAR address inline and remove pci_resource_bar().  That makes
pci_iov_resource_bar() unused, so remove that as well.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29 18:05:09 -06:00
Bjorn Helgaas 6ffa2489c5 PCI: Separate VF BAR updates from standard BAR updates
Previously pci_update_resource() used the same code path for updating
standard BARs and VF BARs in SR-IOV capabilities.

Split the VF BAR update into a new pci_iov_update_resource() internal
interface, which makes it simpler to compute the BAR address (we can get
rid of pci_resource_bar() and pci_iov_resource_bar()).

This patch:

  - Renames pci_update_resource() to pci_std_update_resource(),
  - Adds pci_iov_update_resource(),
  - Makes pci_update_resource() a wrapper that calls the appropriate one,

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29 18:05:09 -06:00
Lukas Wunner c6a6330706 PCI: Activate runtime PM on a PCIe port only if it can suspend
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even
if it will never actually suspend because the BIOS is too old or the
"pcie_port_pm=off" option was specified on the kernel command line.

A few CPU cycles can be saved by not activating runtime PM at all in these
cases, because rpm_idle() and rpm_suspend() will bail out right at the
beginning when calling rpm_check_suspend_allowed(), instead of carrying out
various locking and assignments, invoking rpm_callback(), getting back
-EBUSY and rolling everything back.

The conditions checked in pci_bridge_d3_possible() are all static, they
never change during uptime of the system, hence it's safe to call this to
determine if runtime PM should be activated.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:46:06 -06:00
Lukas Wunner 1ed276a7b9 PCI: Autosense device removal in pci_bridge_d3_update()
The algorithm to update the flag indicating whether a bridge may go to D3
makes a few optimizations based on whether the update was caused by the
removal of a device on the one hand, versus the addition of a device or the
change of its D3cold flags on the other hand.

The information whether the update pertains to a removal is currently
passed in by the caller, but the function may as well determine that itself
by examining the device in question, thereby allowing for a considerable
simplification and reduction of the code.

Out of several options to determine removal, I've chosen the function
device_is_registered() because it's cheap:  It merely returns the
dev->kobj.state_in_sysfs flag.  That flag is set through device_add() when
the root bus is scanned and cleared through device_remove().  The call to
pci_bridge_d3_update() happens after each of these calls, respectively, so
the ordering is correct.

No functional change intended.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17 18:44:56 -06:00
Bjorn Helgaas 3f4f35678f Merge branch 'pci/pm' into next
* pci/pm:
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
2016-10-03 09:43:21 -05:00
Lukas Wunner cc7cc02bad PCI: Query platform firmware for device power state
Usually the most accurate way to determine a PCI device's power state is to
read its PM Control & Status Register.  There are two cases however when
this is not an option:  If the device doesn't have the PM capability at
all, or if it is in D3cold (in which case its config space is
inaccessible).

In both cases, we can alternatively query the platform firmware for its
opinion on the device's power state.  To facilitate this, augment struct
pci_platform_pm_ops with a ->get_power callback and implement it for
acpi_pci_platform_pm (the only pci_platform_pm_ops existing so far).

It is used by a forthcoming commit to let pci_update_current_state()
recognize D3cold.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 11:46:51 -05:00
Jonathan Yong 9bb04a0c4e PCI: Add Precision Time Measurement (PTM) support
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22).

Enable PTM on PTM Root devices and switch ports.  This does not enable PTM
on endpoints.

There currently are no PTM-capable devices on the market, but it is
expected to be supported by the Intel Apollo Lake platform.

[bhelgaas: complete rework]
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-15 13:44:08 -05:00
Mika Westerberg 9d26d3a8f1 PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered.  Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.

With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:

  - The PCIe port hardware is recent enough, starting from 2015.

  - Devices connected to PCIe ports are effectively in D3cold once the port
    is transitioned to D3 (the config space is not accessible anymore and
    the link may be powered down).

  - Devices behind the PCIe port need to be allowed to transition to D3cold
    and back.  There is a way both drivers and userspace can forbid this.

  - If the device behind the PCIe port is capable of waking the system it
    needs to be able to do so from D3cold.

This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port.  When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.

Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.

Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-13 14:57:36 -05:00
Hariprasad Shenai cb92148b58 PCI: Add pci_set_vpd_size() to set VPD size
After 104daa71b3 ("PCI: Determine actual VPD size on first access"), the
PCI core computes the valid VPD size by parsing the VPD starting at offset
0x0.  We don't attempt to read past that valid size because that causes
some devices to crash.

However, some devices do have data past that valid size.  For example,
Chelsio adapters contain two VPD structures, and the driver needs both of
them.

Add pci_set_vpd_size().  If a driver knows it is safe to read past the end
of the VPD data structure at offset 0, it can use pci_set_vpd_size() to
allow access to as much data as it needs.

[bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and
return int (not ssize_t)]
Fixes: 104daa71b3 ("PCI: Determine actual VPD size on first access")
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-04-15 13:00:11 -05:00
Bjorn Helgaas 408641e93a PCI: Fold struct pci_vpd_pci22 into struct pci_vpd
We only support one flavor of VPD, so there's no need to complicate things
by having a "generic" struct pci_vpd and a more specific struct
pci_vpd_pci22.

Fold struct pci_vpd_pci22 directly into struct pci_vpd.

[bhelgaas: remove NULL check before kfree of dev->vpd (per kfreeaddr.cocci)]
Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:36 -06:00
Bjorn Helgaas f1cd93f9aa PCI: Rename VPD symbols to remove unnecessary "pci22"
There's only one kind of VPD, so we don't need to qualify it as "the
version described by PCI spec rev 2.2."

Rename the following symbols to remove unnecessary "pci22":

  PCI_VPD_PCI22_SIZE	-> PCI_VPD_MAX_SIZE
  pci_vpd_pci22_size()	-> pci_vpd_size()
  pci_vpd_pci22_wait()	-> pci_vpd_wait()
  pci_vpd_pci22_read()	-> pci_vpd_read()
  pci_vpd_pci22_write()	-> pci_vpd_write()
  pci_vpd_pci22_ops	-> pci_vpd_ops
  pci_vpd_pci22_init()	-> pci_vpd_init()

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:31 -06:00
Bjorn Helgaas da00684723 PCI: Remove struct pci_vpd_ops.release function pointer
The struct pci_vpd_ops.release function pointer is always
pci_vpd_pci22_release(), so there's no need for the flexibility of a
function pointer.

Inline the pci_vpd_pci22_release() body into pci_vpd_release() and remove
pci_vpd_pci22_release() and the struct pci_vpd_ops.release function
pointer.

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:24 -06:00
Bjorn Helgaas 64379079a9 PCI: Move pci_vpd_release() from header file to pci/access.c
Move pci_vpd_release() so it's next to the other VPD functions.  This puts
it next to pci_vpd_pci22_init(), which allocates the space freed by
pci_vpd_release().

Tested-by: Shane Seymour <shane.seymour@hpe.com>
Tested-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-02-29 17:47:16 -06:00
Linus Torvalds d43421565b PCI changes for the v4.5 merge window:
Enumeration
     Simplify config space size computation (Bjorn Helgaas)
     Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
     Support PCIe devices with short cfg_size (Jason S. McMullan)
     Add Netronome vendor and device IDs (Jason S. McMullan)
     Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
     Add Netronome NFP4000 PF device ID (Simon Horman)
     Limit config space size for Netronome NFP4000 (Simon Horman)
     Print warnings for all invalid expansion ROM headers (Vladis Dronov)
 
   Resource management
     Fix minimum allocation address overwrite (Christoph Biedl)
 
   PCI device hotplug
     acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
     pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
     shpchp: Constify hpc_ops structure (Julia Lawall)
     ibmphp: Remove unneeded NULL test (Julia Lawall)
 
   Power management
     Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
 
   Virtualization
     Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
 
   MSI
     Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
     Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
     Initialize MSI capability for all architectures (Guilherme G. Piccoli)
     Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
 
   ARM Versatile host bridge driver
     Remove unused pci_sys_data structures (Lorenzo Pieralisi)
 
   Broadcom iProc host bridge driver
     Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
     Do not use 0x in front of %pap (Dmitry V. Krivenok)
     Update iProc PCIe device tree binding (Ray Jui)
     Add PAXC interface support (Ray Jui)
     Add iProc PCIe MSI device tree binding (Ray Jui)
     Add iProc PCIe MSI support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Use gpio_set_value_cansleep() (Fabio Estevam)
     Add support for active-low reset GPIO (Petr Štetiar)
 
   HiSilicon host bridge driver
     Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
 
   Intel VMD host bridge driver
     Export irq_domain_set_info() for module use (Keith Busch)
     x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
     Use 32 bit PCI domain numbers (Keith Busch)
     Add driver for Intel Volume Management Device (VMD) (Keith Busch)
 
   Qualcomm host bridge driver
     Document PCIe devicetree bindings (Stanimir Varbanov)
     Add Qualcomm PCIe controller driver (Stanimir Varbanov)
     dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
     dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
 
   Renesas R-Car host bridge driver
     Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
     Allow DT to override default window settings (Phil Edworthy)
     Convert to DT resource parsing API (Phil Edworthy)
     Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
     Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
     Add runtime PM support to pcie-rcar (Phil Edworthy)
     Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
     Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
     Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     Simplify control flow (Bjorn Helgaas)
     Make config accessor override checking symmetric (Bjorn Helgaas)
     Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
 
   Miscellaneous
     Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
     Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
     Fix all whitespace issues (Bogicevic Sasa)
     x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
     Use to_pci_dev() instead of open-coding it (Geliang Tang)
     Use kobj_to_dev() instead of open-coding it (Geliang Tang)
     Use list_for_each_entry() to simplify code (Geliang Tang)
     Fix typos in <linux/msi.h> (Thomas Petazzoni)
     x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoQIuAAoJEFmIoMA60/r8ckYP/0ZrkANeN1SB5cQVi2k7aceq
 kQb1Hk6ifxohJvgpJ/iwmVCHoApyeBfUBfrC+fUpIC2f7ncPsE5HNyjqpAWzFzj2
 sYWwY029yjBQ9g4mPhkvjBXfha+lNtLthWc+Xxcat5pdcyG63Dg4SfJKWm2ZYnbN
 0GJzyRZXIwAMnNf0KIr61Aqru0nXeHvi5wblyJ08UZ7AcNzCtB0wKLmE3S6SeZVF
 f2fry35zcGu+TFvQ1hAYemfl3XyDBJ87nPiKzJAwYSaKcWPFWt+72PBDPO6X9squ
 6prm4nmAgeG2Oo4Zu0fbkDlB2bEsWUc14/xT0i5Wfs35vcwzF+S1zirJAtVqoNir
 NgC7fSbEHbsS7FZOz0rBOBIvIkbb6NdfLFuZqUFv0X1M5bRFywjo8lZRfAYoGJzK
 Mmus0uKbklx5m6RT5adf9+Plev1YJT6XZW9XrDpGnxrwRyPjHmyvuTWsYkumxY7Q
 CE5Wr3p7q2I2+MtrQVv2D9Nzsb+4zQ6BgHrd2vwR/IxTsfdXLU7+B691wkUDX8No
 UKFxBd0FiVCn+srG96u7lWQvdoUqoNCogTZSVzGR5gFBv3zAN9gi8HS7NbV558Mg
 Io3Xw+6dcbG33uvWdU6jHEDLMQsohZcp05Q5esCgRQNV4cGJbPxBDtOZEO/ezvW4
 FAI7lfgYTFiQK3NzE3Ng
 =z9mQ
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...
2016-01-21 11:52:16 -08:00
Julia Lawall 299f2ffed3 PCI / PM: constify pci_platform_pm_ops structure
The pci_platform_pm_ops structure is never modified, so declare it as
const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-09 01:34:32 +01:00
Bjorn Helgaas 128fc68ca1 PCI/MSI: Remove empty pci_msi_init_pci_dev()
4a7cc83167 ("genirq/MSI: Move msi_list from struct pci_dev to struct
device") removed the contents of pci_msi_init_pci_dev().  All
implementation of it are now empty, so remove it completely.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-30 19:35:53 -06:00
Gabriele Paoloni 7c7a0e9453 ARM/PCI: Move align_resource function pointer to pci_host_bridge structure
Commit b3a72384fe ("ARM/PCI: Replace pci_sys_data->align_resource with
global function pointer") introduced an ARM-specific align_resource()
function pointer.  This is not portable to other arches and doesn't work
for platforms with two different PCIe host bridge controllers.

Move the function pointer to the pci_host_bridge structure so each host
bridge driver can specify its own align_resource() function.

Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2015-11-25 13:23:38 -06:00
Linus Torvalds 3c87b79188 PCI changes for the v4.4 merge window:
Resource management
     Add support for Enhanced Allocation devices (Sean O. Stalley)
     Add Enhanced Allocation register entries (Sean O. Stalley)
     Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
     Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
     Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
     Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
     Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
     Expand Enhanced Allocation BAR output (Bjorn Helgaas)
     Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Add sparc mem64 resource parsing for root bus (Yinghai Lu)
 
   PCI device hotplug
     pciehp: Queue power work requests in dedicated function (Guenter Roeck)
 
   Driver binding
     Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
 
   Virtualization
     Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
     Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
     Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
     Reorder pcibios_sriov_disable() (Alexander Duyck)
     Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
     Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
     Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
     Don't try to restore VF BARs (Wei Yang)
 
   MSI
     Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
     Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
     Export all remapped MSIs to sysfs attributes (Romain Bezut)
     Disable MSI on SiS 761 (Ondrej Zary)
 
   AER
     Clear error status registers during enumeration and restore (Taku Izumi)
 
   Generic host bridge driver
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Allow multiple hosts with different map_bus() methods (David Daney)
     Pass starting bus number to pci_scan_root_bus() (David Daney)
     Fix address window calculation for non-zero starting bus (David Daney)
 
   Altera host bridge driver
     Add msi.h to ARM Kbuild (Ley Foon Tan)
     Add Altera PCIe host controller driver (Ley Foon Tan)
     Add Altera PCIe MSI driver (Ley Foon Tan)
 
   APM X-Gene host bridge driver
     Remove msi_controller assignment (Duc Dang)
 
   Broadcom iProc host bridge driver
     Fix header comment "Corporation" misspelling (Florian Fainelli)
     Fix code comment to match code (Ray Jui)
     Remove unused struct iproc_pcie.irqs[] (Ray Jui)
     Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
     Fix PCIe reset logic (Ray Jui)
     Improve link detection logic (Ray Jui)
     Update PCIe device tree bindings (Ray Jui)
     Add outbound mapping support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Return real error code from imx6_add_pcie_port() (Fabio Estevam)
     Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
 
   Freescale Layerscape host bridge driver
     Remove ls_pcie_establish_link() (Minghuan Lian)
     Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
     Factor out SCFG related function (Minghuan Lian)
     Update ls_add_pcie_port() (Minghuan Lian)
     Remove unused fields from struct ls_pcie (Minghuan Lian)
     Add support for LS1043a and LS2080a (Minghuan Lian)
     Add ls_pcie_msi_host_init() (Minghuan Lian)
 
   HiSilicon host bridge driver
     Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
 
   Marvell MVEBU host bridge driver
     Return zero for reserved or unimplemented config space (Russell King)
     Use exact config access size; don't read/modify/write (Russell King)
     Use of_get_available_child_count() (Russell King)
     Use for_each_available_child_of_node() to walk child nodes (Russell King)
     Report full node name when reporting a DT error (Russell King)
     Use port->name rather than "PCIe%d.%d" (Russell King)
     Move port parsing and resource claiming to  separate function (Russell King)
     Fix memory leaks and refcount leaks (Russell King)
     Split port parsing and resource claiming from  port setup (Russell King)
     Use gpio_set_value_cansleep() (Russell King)
     Use devm_kcalloc() to allocate an array (Russell King)
     Use gpio_desc to carry around gpio (Russell King)
     Improve clock/reset handling (Russell King)
     Add PCI Express root complex capability block (Russell King)
     Remove code restricting accesses to slot 0 (Russell King)
 
   NVIDIA Tegra host bridge driver
     Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
 
   Renesas R-Car host bridge driver
     Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
     Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
     Make PCI aware of the I/O resources (Phil Edworthy)
     Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
     Set root bus nr to that provided in DT (Phil Edworthy)
     Fix I/O offset for multiple host bridges (Phil Edworthy)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
 
   Synopsys DesignWare host bridge driver
     Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
     Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
     Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
     Require config accesses to be naturally aligned (Gabriele Paoloni)
     Make "num-lanes" an optional DT property (Gabriele Paoloni)
     Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
     Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
     Factor out MSI msg setup (Lucas Stach)
     Implement multivector MSI IRQ setup (Lucas Stach)
     Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
     Set up high part of MSI target address (Lucas Stach)
     Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
     Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
     Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
     Make driver arch-agnostic (Zhou Wang)
 
   Miscellaneous
     Make x86 pci_subsys_init() static (Alexander Kuleshov)
     Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF
 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y
 YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3
 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR
 c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj
 DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4
 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs
 AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt
 DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a
 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF
 y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2
 ZH9hBj0ctXvucmy6I2mt
 =uZrt
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...
2015-11-06 11:29:53 -08:00