Currently, all the lock waiters entering the slowpath will do one
lock stealing attempt to acquire the lock. That helps performance,
especially in VMs with over-committed vCPUs. However, the current
pvqspinlocks still don't perform as good as unfair locks in many cases.
On the other hands, unfair locks do have the problem of lock starvation
that pvqspinlocks don't have.
This patch combines the best attributes of an unfair lock and a
pvqspinlock into a hybrid lock with 2 modes - queued mode & unfair
mode. A lock waiter goes into the unfair mode when there are waiters
in the wait queue but the pending bit isn't set. Otherwise, it will
go into the queued mode waiting in the queue for its turn.
On a 2-socket 36-core E5-2699 v3 system (HT off), a kernel build
(make -j<n>) was done in a VM with unpinned vCPUs 3 times with the
best time selected and <n> is the number of vCPUs available. The build
times of the original pvqspinlock, hybrid pvqspinlock and unfair lock
with various number of vCPUs are as follows:
vCPUs pvqlock hybrid pvqlock unfair lock
----- ------- -------------- -----------
30 342.1s 329.1s 329.1s
36 314.1s 305.3s 307.3s
45 345.0s 302.1s 306.6s
54 365.4s 308.6s 307.8s
72 358.9s 293.6s 303.9s
108 343.0s 285.9s 304.2s
The hybrid pvqspinlock performs better or comparable to the unfair
lock.
By turning on QUEUED_LOCK_STAT, the table below showed the number
of lock acquisitions in unfair mode and queue mode after a kernel
build with various number of vCPUs.
vCPUs queued mode unfair mode
----- ----------- -----------
30 9,130,518 294,954
36 10,856,614 386,809
45 8,467,264 11,475,373
54 6,409,987 19,670,855
72 4,782,063 25,712,180
It can be seen that as the VM became more and more over-committed,
the ratio of locks acquired in unfair mode increases. This is all
done automatically to get the best overall performance as possible.
Using a kernel locking microbenchmark with number of locking
threads equals to the number of vCPUs available on the same machine,
the minimum, average and maximum (min/avg/max) numbers of locking
operations done per thread in a 5-second testing interval are shown
below:
vCPUs hybrid pvqlock unfair lock
----- -------------- -----------
36 822,135/881,063/950,363 75,570/313,496/ 690,465
54 542,435/581,664/625,937 35,460/204,280/ 457,172
72 397,500/428,177/499,299 17,933/150,679/ 708,001
108 257,898/288,150/340,871 3,085/181,176/1,257,109
It can be seen that the hybrid pvqspinlocks are more fair and
performant than the unfair locks in this test.
The table below shows the kernel build times on a smaller 2-socket
16-core 32-thread E5-2620 v4 system.
vCPUs pvqlock hybrid pvqlock unfair lock
----- ------- -------------- -----------
16 436.8s 433.4s 435.6s
36 366.2s 364.8s 364.5s
48 423.6s 376.3s 370.2s
64 433.1s 376.6s 376.8s
Again, the performance of the hybrid pvqspinlock was comparable to
that of the unfair lock.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1510089486-3466-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order for memory pages to be properly mapped when SEV is active, it's
necessary to use the PAGE_KERNEL protection attribute as the base
protection. This ensures that memory mapping of, e.g. ACPI tables,
receives the proper mapping attributes.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kvm@vger.kernel.org
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20171020143059.3291-11-brijesh.singh@amd.com
In preperation for a new function that will need additional resource
information during the resource walk, update the resource walk callback to
pass the resource structure. Since the current callback start and end
arguments are pulled from the resource structure, the callback functions
can obtain them from the resource structure directly.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20171020143059.3291-10-brijesh.singh@amd.com
The walk_iomem_res_desc(), walk_system_ram_res() and walk_system_ram_range()
functions each have much of the same code.
Create a new function that consolidates the common code from these
functions in one place to reduce the amount of duplicated code.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171020143059.3291-9-brijesh.singh@amd.com
We use alternatives_text_reserved() to check if the address is in
the fixed pieces of alternative reserved, but the problem is that
we don't hold the smp_alt mutex when call this function. So the list
traversal may encounter a deleted list_head if another path is doing
alternatives_smp_module_del().
One solution is that we can hold smp_alt mutex before call this
function, but the difficult point is that the callers of this
functions, arch_prepare_kprobe() and arch_prepare_optimized_kprobe(),
are called inside the text_mutex. So we must hold smp_alt mutex
before we go into these arch dependent code. But we can't now,
the smp_alt mutex is the arch dependent part, only x86 has it.
Maybe we can export another arch dependent callback to solve this.
But there is a simpler way to handle this problem. We can reuse the
text_mutex to protect smp_alt_modules instead of using another mutex.
And all the arch dependent checks of kprobes are inside the text_mutex,
so it's safe now.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Fixes: 2cfa197 "ftrace/alternatives: Introducing *_text_reserved functions"
Link: http://lkml.kernel.org/r/1509585501-79466-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull workqueue fix from Tejun Heo:
"Another fix for a really old bug.
It only affects drain_workqueue() which isn't used often and even then
triggers only during a pretty small race window, so it isn't too
surprising that it stayed hidden for so long.
The fix is straight-forward and low-risk. Kudos to Li Bin for
reporting and fixing the bug"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix NULL pointer dereference
The active development of cgroups v2 sometimes leads to a creation
of interfaces, which are not turned on by default (to provide
backward compatibility). It's handy to know from userspace, which
cgroup v2 features are supported without calculating it based
on the kernel version. So, let's export the list of such features
using /sys/kernel/cgroup/features pseudo-file.
The list is hardcoded and has to be extended when new functionality
is added. Each feature is printed on a new line.
Example:
$ cat /sys/kernel/cgroup/features
nsdelegate
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Delegatable cgroup v2 control files may require special handling
(e.g. chowning), and the exact list of such files varies between
kernel versions (and likely to be extended in the future).
To guarantee correctness of this list and simplify the life
of userspace (systemd, first of all), let's export the list
via /sys/kernel/cgroup/delegate pseudo-file.
Format is siple: each control file name is printed on a new line.
Example:
$ cat /sys/kernel/cgroup/delegate
cgroup.procs
cgroup.subtree_control
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull perf fixes from Ingo Molnar:
"Various fixes:
- synchronize kernel and tooling headers
- cgroup support fix
- two tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Synchronize kernel ABI headers
perf/cgroup: Fix perf cgroup hierarchy support
perf tools: Unwind properly location after REJECT
perf symbols: Fix memory corruption because of zero length symbols
Cgroup v2 lacks the device controller, provided by cgroup v1.
This patch adds a new eBPF program type, which in combination
of previously added ability to attach multiple eBPF programs
to a cgroup, will provide a similar functionality, but with some
additional flexibility.
This patch introduces a BPF_PROG_TYPE_CGROUP_DEVICE program type.
A program takes major and minor device numbers, device type
(block/character) and access type (mknod/read/write) as parameters
and returns an integer which defines if the operation should be
allowed or terminated with -EPERM.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thanks to the ability to load a program for a specific device,
running verifier twice is no longer needed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If TC program is loaded with skip_sw flag, we should allow
the device-specific programs to be accepted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the netdev pointer to bpf_prog_get_type(). This way
BPF code can decide whether the device matches what the
code was loaded/translated for.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct bpf_prog_info to contain information about program
being bound to a device. Since the netdev may get destroyed while
program still exists we need a flag to indicate the program is
loaded for a device, even if the device is gone.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that we don't know which device the program is going
to be used on is quite limiting in current eBPF infrastructure.
We have to reverse or limit the changes which kernel makes to
the loaded bytecode if we want it to be offloaded to a networking
device. We also have to invent new APIs for debugging and
troubleshooting support.
Make it possible to load programs for a specific netdev. This
helps us to bring the debug information closer to the core
eBPF infrastructure (e.g. we will be able to reuse the verifer
log in device JIT). It allows device JITs to perform translation
on the original bytecode.
__bpf_prog_get() when called to get a reference for an attachment
point will now refuse to give it if program has a device assigned.
Following patches will add a version of that function which passes
the expected netdev in. @type argument in __bpf_prog_get() is
renamed to attach_type to make it clearer that it's only set on
attachment.
All calls to ndo_bpf are protected by rtnl, only verifier callbacks
are not. We need a wait queue to make sure netdev doesn't get
destroyed while verifier is still running and calling its driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 674e75411f (sched: cpufreq: Allow remote cpufreq
callbacks) we stopped to always read the utilization for the CPU we
are running the governor on, and instead we read it for the CPU
which we've been told has updated utilization. This is stored in
sugov_cpu->cpu.
The value is set in sugov_register() but we clear it in sugov_start()
which leads to always looking at the utilization of CPU0 instead of
the correct one.
Fix this by consolidating the initialization code into sugov_start().
Fixes: 674e75411f (sched: cpufreq: Allow remote cpufreq callbacks)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds two arm64-specific prctls, to permit userspace to
control its vector length:
* PR_SVE_SET_VL: set the thread's SVE vector length and vector
length inheritance mode.
* PR_SVE_GET_VL: get the same information.
Although these prctls resemble instruction set features in the SVE
architecture, they provide additional control: the vector length
inheritance mode is Linux-specific and nothing to do with the
architecture, and the architecture does not permit EL0 to set its
own vector length directly. Both can be used in portable tools
without requiring the use of SVE instructions.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
[will: Fixed up prctl constants to avoid clash with PDEATHSIG]
Signed-off-by: Will Deacon <will.deacon@arm.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ0WQ6AAoJEHm+PkMAQRiGuloH/3sF4qfBhPuJo8OTf0uCtQ18
4Ux9zZbm81df/Jjz0exAp1Jqk+TvdIS3OXPWcKilvbUBP16hQcsxFTnI/5QF+YcN
87aNr+OCMJzOBK4suN1yhzO46NYHeIizdB0PTZVL1Zsto69Tt31D8VJmgH6oBxAw
Isb/nAkOr31dZ9PI5UEExTIanUt6EywVb0UswA+2rNl3h1UkeasQCpMpK2n6HBhU
kVD7sxEd/CN0MmfhB0HrySSam/BeSpOtzoU9bemOwrU2uu9+5+2rqMe7Gsdj4nX6
3Kk+7FQNktlrhxCZIFN/+CdusOUuDd8r/75d7DnsRK5YvSb0sZzJkfD3Nba68Ms=
=7J2+
-----END PGP SIGNATURE-----
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge 4.14-rc3 in order to pick up the new timer_setup function.
This reverts commit b5149873a0.
It conflicts with the following isolcpus change from the sched branch.
edb9382175 ("sched/isolation: Move isolcpus= handling to the housekeeping code")
Let's revert for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
The bpf_verifer_ops array is generated dynamically and may be
empty depending on configuration, which then causes an out
of bounds access:
kernel/bpf/verifier.c: In function 'bpf_check':
kernel/bpf/verifier.c:4320:29: error: array subscript is above array bounds [-Werror=array-bounds]
This adds a check to the start of the function as a workaround.
I would assume that the function is never called in that configuration,
so the warning is probably harmless.
Fixes: 00176a34d9 ("bpf: remove the verifier ops from program structure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I ran into this link error with the latest net-next plus linux-next
trees when networking is disabled:
kernel/bpf/verifier.o:(.rodata+0x2958): undefined reference to `tc_cls_act_analyzer_ops'
kernel/bpf/verifier.o:(.rodata+0x2970): undefined reference to `xdp_analyzer_ops'
It seems that the code was written to deal with varying contents of
the arrray, but the actual #ifdef was missing. Both tc_cls_act_analyzer_ops
and xdp_analyzer_ops are defined in the core networking code, so adding
a check for CONFIG_NET seems appropriate here, and I've verified this with
many randconfig builds
Fixes: 4f9218aaf8 ("bpf: move knowledge about post-translation offsets out of verifier")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
- A number of MIPS GIC updates and cleanups
- One GICv4 update
- Another firmware workaround for GICv2
- Support for Mason8 GPIOs
- Tiny documentation fix
-----BEGIN PGP SIGNATURE-----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=Aozt
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull the second batch of irqchip updates for 4.15 from marc Zyngier:
- A number of MIPS GIC updates and cleanups
- One GICv4 update
- Another firmware workaround for GICv2
- Support for Mason8 GPIOs
- Tiny documentation fix
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
In commit 30d6e0a419 ("futex: Remove duplicated code and fix undefined
behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op
should be considered as shift and the shift is out of range (< 0 or > 31).
But strace's test suite does this madness:
futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee);
futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced);
futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff);
When I pick the first 0xa0caffee, it decodes as:
0x80000000 & 0xa0caffee: oparg is shift
0x70000000 & 0xa0caffee: op is FUTEX_OP_OR
0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ
0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849
0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18
That means the op tries to do this:
(futex |= (1 << (-849))) == -18
which is completely bogus. The new check of op in the code is:
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) {
if (oparg < 0 || oparg > 31)
return -EINVAL;
oparg = 1 << oparg;
}
which results obviously in the "Invalid argument" errno:
FAIL: futex
===========
futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument
futex.test: failed test: ../futex failed with code 1
So let us soften the failure to print only a (ratelimited) message, crop
the value and continue as if it were right. When userspace keeps up, we
can switch this to return -EINVAL again.
[v2] Do not return 0 immediatelly, proceed with the cropped value.
Fixes: 30d6e0a419 ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow-up to 0fd4759c55 ("bpf: fix pattern matches for direct
packet access") to cover also the remaining data_meta/data matches
in the verifier. The matches are also refactored a bit to simplify
handling of all the cases.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor cleanups after Dave's recent merge in f8ddadc4db
("Merge git://git.kernel.org...") of net into net-next in
order to get the code in line with what was done originally
in the net tree: i) use max() instead of max_t() since both
ranges are u16, ii) don't split the direct access test cases
in the middle with bpf_exit test cases from 390ee7e29f
("bpf: enforce return code for cgroup-bpf programs").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Discovered that the compiler laid-out asm code in suboptimal way
when studying perf report during benchmarking of cpumap. Help
the compiler by the marking unlikely code paths.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smooth Cong Wang's bug fix into 'net-next'. Basically put
the bulk of the tcf_block_put() logic from 'net' into
tcf_block_put_ext(), but after the offload unbind.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull signal bugfix from Eric Biederman:
"When making the generic support for SIGEMT conditional on the presence
of SIGEMT I made a typo that causes it to fail to activate. It was
noticed comparatively quickly but the bug report just made it to me
today"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Fix name of SIGEMT in #if defined() check
Commit cc731525f2 ("signal: Remove kernel interal si_code magic")
added a check for SIGMET and NSIGEMT being defined. That SIGMET should
in fact be SIGEMT, with SIGEMT being defined in
arch/{alpha,mips,sparc}/include/uapi/asm/signal.h
This was actually pointed out by BenHutchings in a lwn.net comment
here https://lwn.net/Comments/734608/
Fixes: cc731525f2 ("signal: Remove kernel interal si_code magic")
Signed-off-by: Andrew Clayton <andrew@digital-domain.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Guenter reported:
There is still a problem. When running
echo 6 > /proc/sys/kernel/watchdog_thresh
echo 5 > /proc/sys/kernel/watchdog_thresh
repeatedly, the message
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
stops after a while (after ~10-30 iterations, with fluctuations).
Maybe watchdog_cpus needs to be atomic ?
That's correct as this again is affected by the asynchronous nature of the
smpboot thread unpark mechanism.
CPU 0 CPU1 CPU2
write(watchdog_thresh, 6)
stop()
park()
update()
start()
unpark()
thread->unpark()
cnt++;
write(watchdog_thresh, 5) thread->unpark()
stop()
park() thread->park()
cnt--; cnt++;
update()
start()
unpark()
That's not a functional problem, it just affects the informational message.
Convert watchdog_cpus to atomic_t to prevent the problem
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20171101181126.j727fqjmdthjz4xk@redhat.com
Guenter reported a crash in the watchdog/perf code, which is caused by
cleanup() and enable() running concurrently. The reason for this is:
The watchdog functions are serialized via the watchdog_mutex and cpu
hotplug locking, but the enable of the perf based watchdog happens in
context of the unpark callback of the smpboot thread. But that unpark
function is not synchronous inside the locking. The unparking of the thread
just wakes it up and leaves so there is no guarantee when the thread is
executing.
If it starts running _before_ the cleanup happened then it will create a
event and overwrite the dead event pointer. The new event is then cleaned
up because the event is marked dead.
lock(watchdog_mutex);
lockup_detector_reconfigure();
cpus_read_lock();
stop();
park()
update();
start();
unpark()
cpus_read_unlock(); thread runs()
overwrite dead event ptr
cleanup();
free new event, which is active inside perf....
unlock(watchdog_mutex);
The park side is safe as that actually waits for the thread to reach
parked state.
Commit a33d44843d removed the protection against this kind of scenario
under the stupid assumption that the hotplug serialization and the
watchdog_mutex cover everything.
Bring it back.
Reverts: a33d44843d ("watchdog/hardlockup/perf: Simplify deferred event destroy")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Feels-stupid Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710312145190.1942@nanos
clockevent_device::next_event holds the next timer event of a clock event
device. The value is updated in clockevents_program_event(), i.e. when the
hardware timer is armed for the next expiry.
When there are no software timers armed on a CPU, the corresponding per CPU
clockevent device is brought into ONESHOT_STOPPED state, but
clockevent_device::next_event is not updated, because
clockevents_program_event() is not called.
So the content of clockevent_device::next_event is stale, which is not an
issue when real hardware is used. But the hrtimer broadcast device relies
on that information and the stale value causes spurious wakeups.
Update clockevent_device::next_event to KTIME_MAX when it has been brought
into ONESHOT_STOPPED state to avoid spurious wakeups. This reflects the
proper expiry time of the stopped timer: infinity.
[ tglx: Massaged changelog ]
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/1509043042-32486-1-git-send-email-psodagud@codeaurora.org
When the irqaffinity= kernel parameter is passed in a CPUMASK_OFFSTACK=y
kernel, it fails to boot, because zalloc_cpumask_var() cannot be used before
initializing the slab allocator to allocate a cpumask.
So, use alloc_bootmem_cpumask_var() instead.
Also do some cleanups while at it: in init_irq_default_affinity() remove
an #ifdef via using cpumask_available().
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171026045800.27087-1-rakib.mullick@gmail.com
Link: http://lkml.kernel.org/r/20171101041451.12581-1-rakib.mullick@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dmitry (through syzbot) reported being able to trigger the WARN in
get_pi_state() and a use-after-free on:
raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock);
Both are due to this race:
exit_pi_state_list() put_pi_state()
lock(&curr->pi_lock)
while() {
pi_state = list_first_entry(head);
hb = hash_futex(&pi_state->key);
unlock(&curr->pi_lock);
dec_and_test(&pi_state->refcount);
lock(&hb->lock)
lock(&pi_state->pi_mutex.wait_lock) // uaf if pi_state free'd
lock(&curr->pi_lock);
....
unlock(&curr->pi_lock);
get_pi_state(); // WARN; refcount==0
The problem is we take the reference count too late, and don't allow it
being 0. Fix it by using inc_not_zero() and simply retrying the loop
when we fail to get a refcount. In that case put_pi_state() should
remove the entry from the list.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Gratian Crisan <gratian.crisan@ni.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dvhart@infradead.org
Cc: syzbot <bot+2af19c9e1ffe4d4ee1d16c56ae7580feaee75765@syzkaller.appspotmail.com>
Cc: syzkaller-bugs@googlegroups.com
Cc: <stable@vger.kernel.org>
Fixes: c74aef2d06 ("futex: Fix pi_state->owner serialization")
Link: http://lkml.kernel.org/r/20171031101853.xpfh72y643kdfhjs@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
During perf event attaching/detaching bpf programs,
the tp_event->prog_array change is protected by the
bpf_event_mutex lock in both attaching and deteching
functions. Although tp_event->prog_array is a rcu
pointer, rcu_derefrence is not needed to access it
since mutex lock will guarantee ordering.
Verified through "make C=2" that sparse
locking check still happy with the new change.
Also change the label name in perf_event_{attach,detach}_bpf_prog
from "out" to "unlock" to reflect the code action after the label.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that SK_REDIRECT is no longer a valid return code. Remove it
from the UAPI completely. Then do a namespace remapping internal
to sockmap so SK_REDIRECT is no longer externally visible.
Patchs primary change is to do a namechange from SK_REDIRECT to
__SK_REDIRECT
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the verifier got progressively smarter over time and size of its internal
state grew as well. Time to reduce the memory consumption.
Before:
sizeof(struct bpf_verifier_state) = 6520
After:
sizeof(struct bpf_verifier_state) = 896
It's done by observing that majority of BPF programs use little to
no stack whereas verifier kept all of 512 stack slots ready always.
Instead dynamically reallocate struct verifier state when stack
access is detected.
Runtime difference before vs after is within a noise.
The number of processed instructions stays the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate the code to write to the new mapping at the end of the
function to remove the duplication. Move the increase in the number
of mappings into insert_extent, keeping the logic together.
Just a small increase in readability and maintainability.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There is no good reason for this code duplication, the number of cache
line accesses not the number of instructions are the bottleneck in
this code.
Therefore simplify maintenance by removing unnecessary code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This is important so reading /proc/<pid>/{uid_map,gid_map,projid_map} while
the map is being written does not do strange things.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Consolidate reading the number of extents and computing the return
value in the map_id_down, map_id_range_down and map_id_range.
This removal of one read of extents makes one smp_rmb unnecessary
and makes the code safe it is executed during the map write. Reading
the number of extents twice and depending on the result being the same
is not safe, as it could be 0 the first time and > 5 the second time,
which would lead to misinterpreting the union fields.
The consolidation of the return value just removes a duplicate
caluculation which should make it easier to understand and maintain
the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are quite some use cases where users run into the current limit for
{g,u}id mappings. Consider a user requesting us to map everything but 999, and
1001 for a given range of 1000000000 with a sub{g,u}id layout of:
some-user:100000:1000000000
some-user:999:1
some-user:1000:1
some-user:1001:1
some-user:1002:1
This translates to:
MAPPING-TYPE | CONTAINER | HOST | RANGE |
-------------|-----------|---------|-----------|
uid | 999 | 999 | 1 |
uid | 1001 | 1001 | 1 |
uid | 0 | 1000000 | 999 |
uid | 1000 | 1001000 | 1 |
uid | 1002 | 1001002 | 999998998 |
------------------------------------------------
gid | 999 | 999 | 1 |
gid | 1001 | 1001 | 1 |
gid | 0 | 1000000 | 999 |
gid | 1000 | 1001000 | 1 |
gid | 1002 | 1001002 | 999998998 |
which is already the current limit.
As discussed at LPC simply bumping the number of limits is not going to work
since this would mean that struct uid_gid_map won't fit into a single cache-line
anymore thereby regressing performance for the base-cases. The same problem
seems to arise when using a single pointer. So the idea is to use
struct uid_gid_extent {
u32 first;
u32 lower_first;
u32 count;
};
struct uid_gid_map { /* 64 bytes -- 1 cache line */
u32 nr_extents;
union {
struct uid_gid_extent extent[UID_GID_MAP_MAX_BASE_EXTENTS];
struct {
struct uid_gid_extent *forward;
struct uid_gid_extent *reverse;
};
};
};
For the base cases we will only use the struct uid_gid_extent extent member. If
we go over UID_GID_MAP_MAX_BASE_EXTENTS mappings we perform a single 4k
kmalloc() which means we can have a maximum of 340 mappings
(340 * size(struct uid_gid_extent) = 4080). For the latter case we use two
pointers "forward" and "reverse". The forward pointer points to an array sorted
by "first" and the reverse pointer points to an array sorted by "lower_first".
We can then perform binary search on those arrays.
Performance Testing:
When Eric introduced the extent-based struct uid_gid_map approach he measured
the performanc impact of his idmap changes:
> My benchmark consisted of going to single user mode where nothing else was
> running. On an ext4 filesystem opening 1,000,000 files and looping through all
> of the files 1000 times and calling fstat on the individuals files. This was
> to ensure I was benchmarking stat times where the inodes were in the kernels
> cache, but the inode values were not in the processors cache. My results:
> v3.4-rc1: ~= 156ns (unmodified v3.4-rc1 with user namespace support disabled)
> v3.4-rc1-userns-: ~= 155ns (v3.4-rc1 with my user namespace patches and user namespace support disabled)
> v3.4-rc1-userns+: ~= 164ns (v3.4-rc1 with my user namespace patches and user namespace support enabled)
I used an identical approach on my laptop. Here's a thorough description of what
I did. I built a 4.14.0-rc4 mainline kernel with my new idmap patches applied. I
booted into single user mode and used an ext4 filesystem to open/create
1,000,000 files. Then I looped through all of the files calling fstat() on each
of them 1000 times and calculated the mean fstat() time for a single file. (The
test program can be found below.)
Here are the results. For fun, I compared the first version of my patch which
scaled linearly with the new version of the patch:
| # MAPPINGS | PATCH-V1 | PATCH-NEW |
|--------------|------------|-----------|
| 0 mappings | 158 ns | 158 ns |
| 1 mappings | 164 ns | 157 ns |
| 2 mappings | 170 ns | 158 ns |
| 3 mappings | 175 ns | 161 ns |
| 5 mappings | 187 ns | 165 ns |
| 10 mappings | 218 ns | 199 ns |
| 50 mappings | 528 ns | 218 ns |
| 100 mappings | 980 ns | 229 ns |
| 200 mappings | 1880 ns | 239 ns |
| 300 mappings | 2760 ns | 240 ns |
| 340 mappings | not tested | 248 ns |
Here's the test program I used. I asked Eric what he did and this is a more
"advanced" implementation of the idea. It's pretty straight-forward:
#define __GNU_SOURCE
#define __STDC_FORMAT_MACROS
#include <errno.h>
#include <dirent.h>
#include <fcntl.h>
#include <inttypes.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
int main(int argc, char *argv[])
{
int ret;
size_t i, k;
int fd[1000000];
int times[1000];
char pathname[4096];
struct stat st;
struct timeval t1, t2;
uint64_t time_in_mcs;
uint64_t sum = 0;
if (argc != 2) {
fprintf(stderr, "Please specify a directory where to create "
"the test files\n");
exit(EXIT_FAILURE);
}
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) {
sprintf(pathname, "%s/idmap_test_%zu", argv[1], i);
fd[i]= open(pathname, O_RDWR | O_CREAT, S_IXUSR | S_IXGRP | S_IXOTH);
if (fd[i] < 0) {
ssize_t j;
for (j = i; j >= 0; j--)
close(fd[j]);
exit(EXIT_FAILURE);
}
}
for (k = 0; k < 1000; k++) {
ret = gettimeofday(&t1, NULL);
if (ret < 0)
goto close_all;
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++) {
ret = fstat(fd[i], &st);
if (ret < 0)
goto close_all;
}
ret = gettimeofday(&t2, NULL);
if (ret < 0)
goto close_all;
time_in_mcs = (1000000 * t2.tv_sec + t2.tv_usec) -
(1000000 * t1.tv_sec + t1.tv_usec);
printf("Total time in micro seconds: %" PRIu64 "\n",
time_in_mcs);
printf("Total time in nanoseconds: %" PRIu64 "\n",
time_in_mcs * 1000);
printf("Time per file in nanoseconds: %" PRIu64 "\n",
(time_in_mcs * 1000) / 1000000);
times[k] = (time_in_mcs * 1000) / 1000000;
}
close_all:
for (i = 0; i < sizeof(fd) / sizeof(fd[0]); i++)
close(fd[i]);
if (ret < 0)
exit(EXIT_FAILURE);
for (k = 0; k < 1000; k++) {
sum += times[k];
}
printf("Mean time per file in nanoseconds: %" PRIu64 "\n", sum / 1000);
exit(EXIT_SUCCESS);;
}
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
CC: Serge Hallyn <serge@hallyn.com>
CC: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Add a struct containing two pointer to extents and wrap both the static extent
array and the struct into a union. This is done in preparation for bumping the
{g,u}idmap limits for user namespaces.
- Add brackets around anonymous union when using designated initializers to
initialize members in order to please gcc <= 4.4.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Pull timekeeping updates from John Stultz:
- More y2038 work from Arnd Bergmann
- A new mechanism to allow RTC drivers to specify the resolution of the
RTC so the suspend/resume code can make informed decisions whether to
inject the suspended time or not in case of fast suspend/resume cycles.
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable fsnotify_mark.refcnt is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
On 64-bit architectures, the timespec64 based helpers in linux/time.h
are defined as macros pointing to their timespec based counterparts.
This made sense when they were first introduced, but as we are migrating
away from timespec in general, it's much less intuitive now.
This changes the macros to work in the exact opposite way: we always
provide the timespec64 based helpers and define the old interfaces as
macros for them. Now we can move those macros into linux/time32.h, which
already contains the respective helpers for 32-bit architectures.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The (slow but) ongoing work on conversion from timespec to timespec64
has led some timespec based helper functions to become unused.
No new code should use them, so we can remove the functions entirely.
I'm planning to obsolete additional interfaces next and remove
more of these.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
As part of changing all the timekeeping code to use 64-bit
time_t consistently, this removes the uses of timeval
and timespec as much as possible from do_adjtimex() and
timekeeping_inject_offset(). The timeval_inject_offset_valid()
and timespec_inject_offset_valid() just complicate this,
so I'm folding them into the respective callers.
This leaves the actual 'struct timex' definition, which
is part of the user-space ABI and should be dealt with
separately when we have agreed on the ABI change.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The code to check the adjtimex() or clock_adjtime() arguments is spread
out across multiple files for presumably only historic reasons. As a
preparatation for a rework to get rid of the use of 'struct timeval'
and 'struct timespec' in there, this moves all the portions into
kernel/time/timekeeping.c and marks them as 'static'.
The warp_clock() function here is not as closely related as the others,
but I feel it still makes sense to move it here in order to consolidate
all callers of timekeeping_inject_offset().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[jstultz: Whitespace fixup]
Signed-off-by: John Stultz <john.stultz@linaro.org>
ntp is currently hardwired to try and call the rtc set when wall clock
tv_nsec is 0.5 seconds. This historical behaviour works well with certain
PC RTCs, but is not universal to all rtc hardware.
Change how this works by introducing the driver specific concept of
set_offset_nsec, the delay between current wall clock time and the target
time to set (with a 0 tv_nsecs).
For x86-style CMOS set_offset_nsec should be -0.5 s which causes the last
second to be written 0.5 s after it has started.
For compat with the old rtc_set_ntp_time, the value is defaulted to
+ 0.5 s, which causes the next second to be written 0.5s before it starts,
as things were before this patch.
Testing shows many non-x86 RTCs would like set_offset_nsec ~= 0,
so ultimately each RTC driver should set the set_offset_nsec according
to its needs, and non x86 architectures should stop using
update_persistent_clock64 in order to access this feature.
Future patches will revise the drivers as needed.
Since CMOS and RTC now have very different handling they are split
into two dedicated code paths, sharing the support code, and ifdefs
are replaced with IS_ENABLED.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
so this message will not mess with the next one
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Maxim Akristiniy <maksim.akristiniy@yotadevices.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The local variable @cgrp isn't used if !CONFIG_CGROUP_SCHED. Mark the
variable with __maybe_unused to avoid a compile warning.
Reported-by: "kbuild-all@01.org" <kbuild-all@01.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
When queue_work() is used in irq (not in task context), there is
a potential case that trigger NULL pointer dereference.
----------------------------------------------------------------
worker_thread()
|-spin_lock_irq()
|-process_one_work()
|-worker->current_pwq = pwq
|-spin_unlock_irq()
|-worker->current_func(work)
|-spin_lock_irq()
|-worker->current_pwq = NULL
|-spin_unlock_irq()
//interrupt here
|-irq_handler
|-__queue_work()
//assuming that the wq is draining
|-is_chained_work(wq)
|-current_wq_worker()
//Here, 'current' is the interrupted worker!
|-current->current_pwq is NULL here!
|-schedule()
----------------------------------------------------------------
Avoid it by checking for task context in current_wq_worker(), and
if not in task context, we shouldn't use the 'current' to check the
condition.
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8d03ecfe47 ("workqueue: reimplement is_chained_work() using current_wq_worker()")
Cc: stable@vger.kernel.org # v3.9+
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
The following commit:
864c2357ca ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
made list_update_cgroup_event() skip setting cpuctx->cgrp if no cgroup event
targets %current's cgroup.
This breaks perf_event's hierarchical support because events which target one
of the ancestors get ignored.
Fix it by using cgroup_is_descendant() test instead of equality.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org # v4.9+
Fixes: 864c2357ca ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
Link: http://lkml.kernel.org/r/20171028164237.GA972780@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is currently unclear how to set the VCPU affinity for a percpu_devid
interrupt , since the Linux irq_data structure describes the state for
multiple interrupts, one for each physical CPU on the system. Since
each such interrupt can be associated with different VCPUs or none at
all, associating a single VCPU state with such an interrupt does not
capture the necessary semantics.
The implementers of irq_set_affinity are the Intel and AMD IOMMUs, and
the ARM GIC irqchip. The Intel and AMD callers do not appear to use
percpu_devid interrupts, and the ARM GIC implementation only checks the
pointer against NULL vs. non-NULL.
Therefore, simply update the function documentation to explain the
expected use in the context of percpu_devid interrupts, allowing future
changes or additions to irqchip implementers to do the right thing.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvm@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/1509093281-15225-13-git-send-email-cdall@linaro.org
Pull networking fixes from David Miller:
1) Fix route leak in xfrm_bundle_create().
2) In mac80211, validate user rate mask before configuring it. From
Johannes Berg.
3) Properly enforce memory limits in fair queueing code, from Toke
Hoiland-Jorgensen.
4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet.
5) Fix TSO header allocation and management in mvpp2 driver, from Yan
Markman.
6) Don't take socket lock in BH handler in strparser code, from Tom
Herbert.
7) Don't show sockets from other namespaces in AF_UNIX code, from
Andrei Vagin.
8) Fix double free in error path of tap_open(), from Girish Moodalbail.
9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker
and Alexander Duyck.
10) Fix DCB mode programming in stmmac driver, from Jose Abreu.
11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin
Long.
12) Properly align SKB head before building SKB in tuntap, from Jason
Wang.
13) Avoid matching qdiscs with a zero handle during lookups, from Cong
Wang.
14) Fix various endianness bugs in sctp, from Xin Long.
15) Fix tc filter callback races and add selftests which trigger the
problem, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
selftests: Introduce a new test case to tc testsuite
selftests: Introduce a new script to generate tc batch file
net_sched: fix call_rcu() race on act_sample module removal
net_sched: add rtnl assertion to tcf_exts_destroy()
net_sched: use tcf_queue_work() in tcindex filter
net_sched: use tcf_queue_work() in rsvp filter
net_sched: use tcf_queue_work() in route filter
net_sched: use tcf_queue_work() in u32 filter
net_sched: use tcf_queue_work() in matchall filter
net_sched: use tcf_queue_work() in fw filter
net_sched: use tcf_queue_work() in flower filter
net_sched: use tcf_queue_work() in flow filter
net_sched: use tcf_queue_work() in cgroup filter
net_sched: use tcf_queue_work() in bpf filter
net_sched: use tcf_queue_work() in basic filter
net_sched: introduce a workqueue for RCU callbacks of tc filter
sctp: fix some type cast warnings introduced since very beginning
sctp: fix a type cast warnings that causes a_rwnd gets the wrong value
sctp: fix some type cast warnings introduced by transport rhashtable
sctp: fix some type cast warnings introduced by stream reconf
...
Recent additions to support multiple programs in cgroups impose
a strict requirement, "all yes is yes, any no is no". To enforce
this the infrastructure requires the 'no' return code, SK_DROP in
this case, to be 0.
To apply these rules to SK_SKB program types the sk_actions return
codes need to be adjusted.
This fix adds SK_PASS and makes 'SK_DROP = 0'. Finally, remove
SK_ABORTED to remove any chance that the API may allow aborted
program flows to be passed up the stack. This would be incorrect
behavior and allow programs to break existing policies.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_SKB program types use bpf_compute_data to store the end of the
packet data. However, bpf_compute_data assumes the cb is stored in the
qdisc layer format. But, for SK_SKB this is the wrong layer of the
stack for this type.
It happens to work (sort of!) because in most cases nothing happens
to be overwritten today. This is very fragile and error prone.
Fortunately, we have another hole in tcp_skb_cb we can use so lets
put the data_end value there.
Note, SK_SKB program types do not use data_meta, they are failed by
sk_skb_is_valid_access().
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit afdb09c720 ("security: bpf: Add LSM hooks for bpf object related
syscall") included linux/bpf.h in linux/security.h. As a result, bpf
programs including bpf_helpers.h and some other header that ends up
pulling in also security.h, such as several examples under samples/bpf,
fail to compile because bpf_tail_call and bpf_get_stackid are now
"redefined as different kind of symbol".
>From bpf.h:
u64 bpf_tail_call(u64 ctx, u64 r2, u64 index, u64 r4, u64 r5);
u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
Whereas in bpf_helpers.h they are:
static void (*bpf_tail_call)(void *ctx, void *map, int index);
static int (*bpf_get_stackid)(void *ctx, void *map, int flags);
Fix this by removing the unused declaration of bpf_tail_call and moving
the declaration of bpf_get_stackid in bpf_trace.c, which is the only
place where it's needed.
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current even timekeeping, which computes enabled and running
times, uses 3 distinct timestamps to reflect the various event states:
OFF (stopped), INACTIVE (enabled) and ACTIVE (running).
Furthermore, the update rules are such that even INACTIVE events need
their timestamps updated. This is undesirable because we'd like to not
touch INACTIVE events if at all possible, this makes event scheduling
(much) more expensive than needed.
Rewrite the timekeeping to directly use event->state, this greatly
simplifies the code and results in only having to update things when
we change state, or an up-to-date value is requested (read).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_read() has a number of issues regarding the timekeeping bits.
- The IPI didn't update group times when it found INACTIVE
- The direct call would not re-check ->state after taking ctx->lock
which can result in ->count and timestamps getting out of sync.
And we can make use of the ordering introduced for perf_event_stop()
to make it more accurate for ACTIVE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The barrier and comment make no sense:
- if what the barrier says is true, it should be wmb() but that
should then be part of the arch driver, not the generic code.
- if it is an SMP barrier, there must be a matching barrier, and
there isn't one.
So kill it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Its a weird name, active is one of the states, it should not be part
of the name, also, its too long.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should make sure to update ctx time before we use it to update
event times.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Event timestamps are serialized using ctx->lock, make sure to hold it
over reading all values.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should make sure the ctx time is updated before we detach events;
which will want to update event times.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_read_value() is an external accessor, just like
perf_event_{en,dis}able() and should thus use perf_event_ctx_lock().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f63a8daa58 ("perf: Fix event->ctx locking")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
eBPF programs would like access to the (perf) event enabled and
running times along with the event value, such that they can deal with
event multiplexing (among other things).
This patch extends the interface; a future eBPF patch will utilize
the new functionality.
[ Note, there's a same-content commit with a poor changelog and a meaningless
title in the networking tree as well - but we need this change for subsequent
perf work, so apply it here as well, with a proper changelog. Hopefully Git
will be able to sort out this somewhat messy workflow, if there are no other,
conflicting changes to these files. ]
Signed-off-by: Yonghong Song <yhs@fb.com>
[ Rewrote the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <ast@fb.com>
Cc: <daniel@iogearbox.net>
Cc: <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20171005161923.332790-2-yhs@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add flags to control NOHZ and domain isolation from "isolcpus=", in
order to centralize the isolation features to a common interface. Domain
isolation remains the default so not to break the existing isolcpus
boot paramater behaviour.
Further flags in the future may include 0hz (1hz tick offload) and timers,
workqueue, RCU, kthread, watchdog, likely all merged together in a
common flag ("async"?). In any case, this will have to be modifiable by
cpusets.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to centralize the isolation features, to be done by the housekeeping
subsystem and scheduler domain isolation is a significant part of it.
No intended behaviour change, we just reuse the housekeeping cpumask
and core code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to centralize the isolation management, done by the housekeeping
subsystem. Therefore we need to handle the nohz_full= parameter from
there.
Since nohz_full= so far has involved unbound timers, watchdog, RCU
and tilegx NAPI isolation, we keep that default behaviour.
nohz_full= will be deprecated in the future. We want to control
the isolation features from the isolcpus= parameter.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Before we implement isolcpus under housekeeping, we need the isolation
features to be more finegrained. For example some people want NOHZ_FULL
without the full scheduler isolation, others want full scheduler
isolation without NOHZ_FULL.
So let's cut all these isolation features piecewise, at the risk of
overcutting it right now. We can still merge some flags later if they
always make sense together.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-9-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally
separate the isolation code from NOHZ.
Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the
housekeeping code still deals with NOHZ internals.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fit it into the housekeeping_*() namespace.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Housekeeping code still depends on the nohz_full static key. Since we want
to decouple housekeeping from NOHZ, let's create a housekeeping specific
static key.
It's mostly relevant for calls to is_housekeeping_cpu() from the scheduler.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-6-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nobody needs to access this detail. housekeeping_cpumask() already
takes care of it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While trying to disable the watchog on nohz_full CPUs, the watchdog
implements an ad-hoc version of housekeeping_cpumask(). Lets replace
those re-invented lines.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The housekeeping code is currently tied to the NOHZ code. As we are
planning to make housekeeping independent from it, start with moving
the relevant code to its own file.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The basic cpu stat is currently shown with "cpu." prefix in
cgroup.stat, and the same information is duplicated in cpu.stat when
cpu controller is enabled. This is ugly and not very scalable as we
want to expand the coverage of stat information which is always
available.
This patch makes cgroup core always create "cpu.stat" file and show
the basic cpu stat there and calls the cpu controller to show the
extra stats when enabled. This ensures that the same information
isn't presented in multiple places and makes future expansion of basic
stats easier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
__klp_disable_patch() should never be called when the patch is not
enabled. Let's add the same warning that we have in __klp_enable_patch().
This allows to remove the check when calling klp_pre_unpatch_callback().
It was strange anyway because it repeatedly checked per-patch flag
for each patched object.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The post_unpatch_enabled flag in struct klp_callbacks is set when a
pre-patch callback successfully executes, indicating that we need to
call a corresponding post-unpatch callback when the patch is reverted.
This is true for ordinary patch disable as well as the error paths of
klp_patch_object() callers.
As currently coded, we inadvertently execute the post-patch callback
twice in klp_module_coming() when klp_patch_object() fails:
- We explicitly call klp_post_unpatch_callback() for the failed object
- We call it again for the same object (and all the others) via
klp_cleanup_module_patches_limited()
We should clear the flag in klp_post_unpatch_callback() to make
sure that the callback is not called twice. It makes the API
more safe.
(We could have removed the callback from the former error path as it
would be covered by the latter call, but I think that is is cleaner to
clear the post_unpatch_enabled after its invoked. For example, someone
might later decide to call the callback only when obj->patched flag is
set.)
There is another mistake in the error path of klp_coming_module() in
which it skips the post-unpatch callback for the klp_transition_patch.
However, the pre-patch callback was called even for this patch, so be
sure to make the corresponding callbacks for all patches.
Finally, I used this opportunity to make klp_pre_patch_callback() more
readable.
[jkosina@suse.cz: incorporate changelog wording changes proposed by Joe Lawrence]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Johan Hovold reported a heavy performance regression caused by lockdep
cross-release:
> Boot time (from "Linux version" to login prompt) had in fact doubled
> since 4.13 where it took 17 seconds (with my current config) compared to
> the 35 seconds I now see with 4.14-rc4.
>
> I quick bisect pointed to lockdep and specifically the following commit:
>
> 28a903f63e ("locking/lockdep: Handle non(or multi)-acquisition
> of a crosslock")
>
> which I've verified is the commit which doubled the boot time (compared
> to 28a903f63ec0^) (added by lockdep crossrelease series [1]).
Currently cross-release performs unwind on every acquisition, but that
is very expensive.
This patch makes unwind optional and disables it by default and only
records acquire_ip.
Full stack traces are sometimes required for full analysis, in which
case a boot paramter, crossrelease_fullstack, can be specified.
On my qemu Ubuntu machine (x86_64, 4 cores, 512M), the regression was
fixed. We measure boot times with 'perf stat --null --repeat 10 $QEMU',
where $QEMU launches a kernel with init=/bin/true:
1. No lockdep enabled:
Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
2.756558155 seconds time elapsed ( +- 0.09% )
2. Lockdep enabled:
Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
2.968710420 seconds time elapsed ( +- 0.12% )
3. Lockdep enabled + cross-release enabled:
Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
3.153839636 seconds time elapsed ( +- 0.31% )
4. Lockdep enabled + cross-release enabled + this patch applied:
Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
2.963669551 seconds time elapsed ( +- 0.11% )
I.e. lockdep cross-release performance is now indistinguishable from
vanilla lockdep.
Bisected-by: Johan Hovold <johan@kernel.org>
Analyzed-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: darrick.wong@oracle.com
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-5-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts the workqueue code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-12-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a prospective writer takes the qrwlock locking slowpath due to the
lock being held, it attempts to cmpxchg the wmode field from 0 to
_QW_WAITING so that concurrent lockers also take the slowpath and queue
on the spinlock accordingly, allowing the lockers to drain.
Unfortunately, this isn't fair, because a fastpath writer that comes in
after the lock is made available but before the _QW_WAITING flag is set
can effectively jump the queue. If there is a steady stream of prospective
writers, then the waiter will be held off indefinitely.
This patch restores fairness by separating _QW_WAITING and _QW_LOCKED
into two distinct fields: _QW_LOCKED continues to occupy the bottom byte
of the lockword so that it can be cleared unconditionally when unlocking,
but _QW_WAITING now occupies what used to be the bottom bit of the reader
count. This then forces the slow-path for concurrent lockers.
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Tested-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-6-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The qrwlock slowpaths involve spinning when either a prospective reader
is waiting for a concurrent writer to drain, or a prospective writer is
waiting for concurrent readers to drain. In both of these situations,
atomic_cond_read_acquire() can be used to avoid busy-waiting and make use
of any backoff functionality provided by the architecture.
This patch replaces the open-code loops and rspin_until_writer_unlock()
implementation with atomic_cond_read_acquire(). The write mode transition
zero to _QW_WAITING is left alone, since (a) this doesn't need acquire
semantics and (b) should be fast.
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Tested-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no good reason to keep the internal structure of struct qrwlock
hidden from qrwlock.h, particularly as it's actually needed for unlock
and ends up being abstracted independently behind the __qrwlock_write_byte()
function.
Stop pretending we can hide this stuff, and move the __qrwlock definition
into qrwlock, removing the __qrwlock_write_byte() nastiness and using the
same struct definition everywhere instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch enables multiple bpf attachments for a
kprobe/uprobe/tracepoint single trace event.
Each trace_event keeps a list of attached perf events.
When an event happens, all attached bpf programs will
be executed based on the order of attachment.
A global bpf_event_mutex lock is introduced to protect
prog_array attaching and detaching. An alternative will
be introduce a mutex lock in every trace_event_call
structure, but it takes a lot of extra memory.
So a global bpf_event_mutex lock is a good compromise.
The bpf prog detachment involves allocation of memory.
If the allocation fails, a dummy do-nothing program
will replace to-be-detached program in-place.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cleanup such that doing the same check in
perf_event_free_bpf_prog as we already do in
perf_event_set_bpf_prog step.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpulist_parse() uses nr_cpumask_bits as a limit to parse the
passed buffer from kernel commandline. What nr_cpumask_bits
represents varies depending upon the CONFIG_CPUMASK_OFFSTACK option:
- If CONFIG_CPUMASK_OFFSTACK=n, then nr_cpumask_bits is the same as
NR_CPUS, which might not represent the # of CPUs that really exist
(default 64). So, there's a chance of a gap between nr_cpu_ids
and NR_CPUS, which ultimately lead towards invalid cpulist_parse()
operation. For example, if isolcpus=9 is passed on an 8 cpu
system (CONFIG_CPUMASK_OFFSTACK=n) it doesn't show the error
that it's supposed to.
This patch fixes this bug by finding the last CPU of the passed
isolcpus= list and checking it against nr_cpu_ids.
It also fixes the error message where the nr_cpu_ids should be
nr_cpu_ids-1, since CPU numbering starts from 0.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adobriyan@gmail.com
Cc: akpm@linux-foundation.org
Cc: longman@redhat.com
Cc: mka@chromium.org
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20171023130154.9050-1-rakib.mullick@gmail.com
[ Enhanced the changelog and the kernel message. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
include/linux/cpumask.h | 16 ++++++++++++++++
kernel/sched/topology.c | 4 ++--
2 files changed, 18 insertions(+), 2 deletions(-)
As pointed out by Michael, commit 1c601d829a ("bpf: cpumap xdp_buff
to skb conversion and allocation") contains a classical example of the
potential lost wake-up problem.
We need to recheck the condition __ptr_ring_empty() after changing
current->state to TASK_INTERRUPTIBLE, this avoids a race between
wake_up_process() and schedule(). After this, a race with
wake_up_process() will simply change the state to TASK_RUNNING, and
the schedule() call not really put us to sleep.
Fixes: 1c601d829a ("bpf: cpumap xdp_buff to skb conversion and allocation")
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull workqueue fix from Tejun Heo:
"This is a fix for an old bug in workqueue. Workqueue used a mutex to
arbitrate who gets to be the manager of a pool. When the manager role
gets released, the mutex gets unlocked while holding the pool's
irqsafe spinlock. This can lead to deadlocks as mutex's internal
spinlock isn't irqsafe. This got discovered by recent fixes to mutex
lockdep annotations.
The fix is a bit invasive for rc6 but if anything were wrong with the
fix it would likely have already blown up in -next, and we want the
fix in -stable anyway"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: replace pool->manager_arb mutex with a flag
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull smp/hotplug fix from Thomas Gleixner:
"The recent rework of the callback invocation missed to cleanup the
leftovers of the operation, so under certain circumstances a
subsequent CPU hotplug operation accesses stale data and crashes.
Clean it up."
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Reset node state after operation
Pull irq fixes from Thomas Gleixner:
"A set of small fixes mostly in the irq drivers area:
- Make the tango irq chip work correctly, which requires a new
function in the generiq irq chip implementation
- A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON()
and parsing the VCPU table size correctly"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack()
irqchip/tango: Use irq_gc_mask_disable_and_ack_set
genirq: generic chip: Add irq_gc_mask_disable_and_ack_set()
irqchip/gic-v3-its: Add missing changes to support 52bit physical address
irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size
irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain()
DT: arm,gic-v3: Update the ITS size in the examples
Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
Alexander had a test program with direct packet access, where
the access test was in the form of data + X > data_end. In an
unrelated change to the program LLVM decided to swap the branches
and emitted code for the test in form of data + X <= data_end.
We hadn't seen these being generated previously, thus verifier
would reject the program. Therefore, fix up the verifier to
detect all test cases, so we don't run into such issues in the
future.
Fixes: b4e432f100 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Reported-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During review I noticed that the current logic for direct packet
access marking in check_cond_jmp_op() has an off by one for the
upper right range border when marking in find_good_pkt_pointers()
with BPF_JLT and BPF_JLE. It's not really harmful given access
up to pkt_end is always safe, but we should nevertheless correct
the range marking before it becomes ABI. If pkt_data' denotes a
pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end
in the true branch as well as for pkt_end <= pkt_data' in the false
branch we mark the range with X although it should really be X - 1
in these cases. For example, X could be pkt_end - pkt_data, then
when testing for pkt_data' < pkt_end the verifier simulation cannot
deduce that a byte load of pkt_data' - 1 would succeed in this
branch.
Fixes: b4e432f100 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An integer overflow is possible in dev_map_bitmap_size() when
calculating the BITS_TO_LONG logic which becomes, after macro
replacement,
(((n) + (d) - 1)/ (d))
where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid
overflow cast to u64 before arithmetic.
Reported-by: Richard Weinberger <richard@nod.at>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize wq_unbound_cpumask to exclude cpus that were isolated by
the cmdline's isolcpus parameter.
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The recent rework of the cpu hotplug internals changed the usage of the per
cpu state->node field, but missed to clean it up after usage.
So subsequent hotplug operations use the stale pointer from a previous
operation and hand it into the callback functions. The callbacks then
dereference a pointer which either belongs to a different facility or
points to freed and potentially reused memory. In either case data
corruption and crashes are the obvious consequence.
Reset the node and the last pointers in the per cpu state to NULL after the
operation which set them has completed.
Fixes: 96abb96854 ("smp/hotplug: Allow external multi-instance rollback")
Reported-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710211606130.3213@nanos
As pointed out by Linus and David, the earlier waitid() fix resulted in
a (currently harmless) unbalanced user_access_end() call. This fixes it
to just directly return EFAULT on access_ok() failure.
Fixes: 96ca579a1e ("waitid(): Add missing access_ok() checks")
Acked-by: David Daney <david.daney@cavium.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a bpf object related check when sending and receiving files
through unix domain socket as well as binder. It checks if the receiving
process have privilege to read/write the bpf map or use the bpf program.
This check is necessary because the bpf maps and programs are using a
anonymous inode as their shared inode so the normal way of checking the
files and sockets when passing between processes cannot work properly on
eBPF object. This check only works when the BPF_SYSCALL is configured.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce several LSM hooks for the syscalls that will allow the
userspace to access to eBPF object such as eBPF programs and eBPF maps.
The security check is aimed to enforce a per object security protection
for eBPF object so only processes with the right priviliges can
read/write to a specific map or use a specific eBPF program. Besides
that, a general security hook is added before the multiplexer of bpf
syscall to check the cmd and the attribute used for the command. The
actual security module can decide which command need to be checked and
how the cmd should be checked.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the map read/write flags to the eBPF syscalls that returns the
map fd. The flags is used to set up the file mode when construct a new
file descriptor for bpf maps. To not break the backward capability, the
f_flags is set to O_RDWR if the flag passed by syscall is 0. Otherwise
it should be O_RDONLY or O_WRONLY. When the userspace want to modify or
read the map content, it will check the file mode to see if it is
allowed to make the change.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devmap is used with XDP which requires CAP_NET_ADMIN so lets also
make CAP_NET_ADMIN required to use the map.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restrict sockmap to CAP_NET_ADMIN.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only TCP sockets have been tested and at the moment the state change
callback only handles TCP sockets. This adds a check to ensure that
sockets actually being added are TCP sockets.
For net-next we can consider UDP support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable jprobes test code because jprobes are deprecated.
This code will be completely removed when the jprobe code
is removed.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Ian McDonald <ian.mcdonald@jandi.co.nz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Link: http://lkml.kernel.org/r/150724531730.5014.6377596890962355763.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Disable the jprobes APIs and comment out the jprobes API function
code. This is in preparation of removing all jprobes related
code (including kprobe's break_handler).
Nowadays ftrace and other tracing features are mature enough
to replace jprobes use-cases. Users can safely use ftrace and
perf probe etc. for their use cases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Ian McDonald <ian.mcdonald@jandi.co.nz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Link: http://lkml.kernel.org/r/150724527741.5014.15465541485637899227.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to wait for all potentially preempted kprobes trampoline
execution to have completed. This guarantees that any freed
trampoline memory is not in use by any task in the system anymore.
synchronize_rcu_tasks() gives such a guarantee, so use it.
Also, this guarantees to wait for all potentially preempted tasks
on the instructions which will be replaced with a jump.
Since this becomes a problem only when CONFIG_PREEMPT=y, enable
CONFIG_TASKS_RCU=y for synchronize_rcu_tasks() in that case.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/150845661962.5443.17724352636247312231.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because many of RCU's files have not been included into docbook, a
number of errors have accumulated. This commit fixes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This introduces a "register private expedited" membarrier command which
allows eventual removal of important memory barrier constraints on the
scheduler fast-paths. It changes how the "private expedited" membarrier
command (new to 4.14) is used from user-space.
This new command allows processes to register their intent to use the
private expedited command. This affects how the expedited private
command introduced in 4.14-rc is meant to be used, and should be merged
before 4.14 final.
Processes are now required to register before using
MEMBARRIER_CMD_PRIVATE_EXPEDITED, otherwise that command returns EPERM.
This fixes a problem that arose when designing requested extensions to
sys_membarrier() to allow JITs to efficiently flush old code from
instruction caches. Several potential algorithms are much less painful
if the user register intent to use this functionality early on, for
example, before the process spawns the second thread. Registering at
this time removes the need to interrupt each and every thread in that
process at the first expedited sys_membarrier() system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The RT build on ARM complains about non-existing ULONG_CMP_LT.
This commit therefore includes rcupdate.h into rcu_segcblist.c.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If you add or remove calls to rcu_idle_enter(), rcu_user_enter(),
rcu_irq_exit(), rcu_irq_exit_irqson(), rcu_idle_exit(), rcu_user_exit(),
rcu_irq_enter(), rcu_irq_enter_irqson(), rcu_nmi_enter(), or
rcu_nmi_exit(), you should run a full set of tests on a kernel built
with CONFIG_RCU_EQS_DEBUG=y.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU priority boosting uses rt_mutex_init_proxy_locked() to initialize an
rt_mutex structure in locked state held by some other task. When that
other task releases it, lockdep complains (quite accurately, but a bit
uselessly) that the other task never acquired it. This complaint can
suppress other, more helpful, lockdep complaints, and in any case it is
a false positive.
This commit therefore switches from rt_mutex_unlock() to
rt_mutex_futex_unlock(), thereby avoiding the lockdep annotations.
Of course, if lockdep ever learns about rt_mutex_init_proxy_locked(),
addtional adjustments will be required.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adjusts include files and provides definitions in preparation
for suppressing lockdep false-positive ->boost_mtx complaints. Without
this preparation, architectures not supporting rt_mutex will get build
failures.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=n, the call path
hrtimer_reprogram -> clockevents_program_event ->
clockevents_program_min_delta will not retry if the clock event driver
returns -ETIME.
If the driver could not satisfy the program_min_delta for any reason, the
lack of a retry means the CPU may not receive a tick interrupt, potentially
until the counter does a full period. This leads to rcu_sched timeout
messages as the stalled CPU is detected by other CPUs, and other issues if
the CPU is holding locks or other resources at the point at which it
stalls.
There have been a couple of observed mechanisms through which a clock event
driver could not satisfy the requested min_delta and return -ETIME.
With the MIPS GIC driver, the shared execution resource within MT cores
means inconventient latency due to execution of instructions from other
hardware threads in the core, within gic_next_event, can result in an event
being set in the past.
Additionally under virtualisation it is possible to get unexpected latency
during a clockevent device's set_next_event() callback which can make it
return -ETIME even for a delta based on min_delta_ns.
It isn't appropriate to use MIN_ADJUST in the virtualisation case as
occasional hypervisor induced high latency will cause min_delta_ns to
quickly increase to the maximum.
Instead, borrow the retry pattern from the MIN_ADJUST case, but without
making adjustments. Retry up to 10 times, each time increasing the
attempted delta by min_delta, before giving up.
[ Matt: Reworked the loop and made retry increase the delta. ]
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: "Martin Schwidefsky" <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@mips.com>
Link: https://lkml.kernel.org/r/1508422643-6075-1-git-send-email-matt.redfearn@mips.com
PCPU_MIN_UNIT_SIZE is an implementation detail of the percpu
allocator. Given we support __GFP_NOWARN now, lets just let
the allocation request fail naturally instead. The two call
sites from BPF mistakenly assumed __GFP_NOWARN would work, so
no changes needed to their actual __alloc_percpu_gfp() calls
which use the flag already.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was reported that syzkaller was able to trigger a splat on
devmap percpu allocation due to illegal/unsupported allocation
request size passed to __alloc_percpu():
[ 70.094249] illegal size (32776) or align (8) for percpu allocation
[ 70.094256] ------------[ cut here ]------------
[ 70.094259] WARNING: CPU: 3 PID: 3451 at mm/percpu.c:1365 pcpu_alloc+0x96/0x630
[...]
[ 70.094325] Call Trace:
[ 70.094328] __alloc_percpu_gfp+0x12/0x20
[ 70.094330] dev_map_alloc+0x134/0x1e0
[ 70.094331] SyS_bpf+0x9bc/0x1610
[ 70.094333] ? selinux_task_setrlimit+0x5a/0x60
[ 70.094334] ? security_task_setrlimit+0x43/0x60
[ 70.094336] entry_SYSCALL_64_fastpath+0x1a/0xa5
This was due to too large max_entries for the map such that we
surpassed the upper limit of PCPU_MIN_UNIT_SIZE. It's fine to
fail naturally here, so switch to __alloc_percpu_gfp() and pass
__GFP_NOWARN instead.
Fixes: 11393cc9b9 ("xdp: Add batching support to redirect map")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Shankara Pailoor <sp3485@columbia.edu>
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The revmap_trees_mutex protects domain->revmap_tree. There is no
need to make it global because it is allowed to modify revmap_tree
of two different domains concurrently. Having said that, this would
not be a actual bottleneck because the interrupt map/unmap does not
occur quite often. Rather, the motivation is to tidy up the code
from a data structure point of view.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Log a few kernel debug messages at the beginning of the following livepatch
transition functions:
klp_complete_transition()
klp_cancel_transition()
klp_init_transition()
klp_reverse_transition()
Also update the log notice message in klp_start_transition() for similar
verbiage as the above messages.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
klp_complete_transition() performs a bit of housework before a
transition to KLP_PATCHED or KLP_UNPATCHED is actually completed
(including post-(un)patch callbacks). To be consistent, move the
transition "complete" kernel log notice out of
klp_try_complete_transition() and into klp_complete_transition().
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Provide livepatch modules a klp_object (un)patching notification
mechanism. Pre and post-(un)patch callbacks allow livepatch modules to
setup or synchronize changes that would be difficult to support in only
patched-or-unpatched code contexts.
Callbacks can be registered for target module or vmlinux klp_objects,
but each implementation is klp_object specific.
- Pre-(un)patch callbacks run before any (un)patching transition
starts.
- Post-(un)patch callbacks run once an object has been (un)patched and
the klp_patch fully transitioned to its target state.
Example use cases include modification of global data and registration
of newly available services/handlers.
See Documentation/livepatch/callbacks.txt for details and
samples/livepatch/ for examples.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation for unconditionally passing the struct timer_list pointer
to all timer callbacks, switch to using the new timer_setup() and
from_timer() to pass the timer pointer explicitly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
In preparation for unconditionally passing the struct timer_list pointer
to all timer callbacks, switch to using the new timer_setup() and
from_timer() to pass the timer pointer explicitly. (The prior workqueue
patch missed a few timers.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Link: https://lkml.kernel.org/r/20171016225825.GA99101@beast
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The interrupt reservation mode requires reactivation of PCI/MSI
interrupts. Create a config option, so the PCI code can set the
corresponding flag when required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Link: https://lkml.kernel.org/r/20171017075600.369375409@linutronix.de
If the base clock is behind jiffies in the soft irq expiry code then the
next timer is retrieved by get_next_timer_interrupt() to avoid incrementing
base clock one by one. If the next timer interrupt is past current jiffies
then the base clock is set to jiffies - 1. At the call site this is
incremented and another iteration through the expiry loop is executed which
checks empty hash buckets.
That's a pointless excercise because it's already known that the next timer
is past jiffies.
Set the base clock in that case to jiffies directly so it gets incremented
to jiffies + 1 at the call site resulting in immediate termination of the
expiry loop.
[ tglx: Massaged changelog and added comment to the code ]
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: sboyd@codeaurora.org
Cc: Srinivas Reddy Eeda <srinivas.eeda@oracle.com>
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/7086a857-f90c-4616-bbe8-f7696f21626c@default
This reverts commit:
e863d53961 ("kprobes: Warn if optprobe handler tries to change execution path")
On PowerPC, we place a probe at kretprobe_trampoline to catch function
returns and with CONFIG_OPTPROBES=y, this probe gets optimized. This
works for us due to the way we handle the optprobe as described in
commit:
762df10bad ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()")
With the above commit, we end up with a warning. As such, revert this change.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171017081834.3629-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the fact that verifier ops are now separate from program
ops to define a separate set of callbacks for verification of
already translated programs.
Since we expect the analyzer ops to be defined only for
a small subset of all program types initialize their array
by hand (don't use linux/bpf_types.h).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the verifier ops don't have to be associated with
the program for its entire lifetime we can move it to
verifier's struct bpf_verifier_env.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct bpf_verifier_ops contains both verifier ops and operations
used later during program's lifetime (test_run). Split the runtime
ops into a different structure.
BPF_PROG_TYPE() will now append ## _prog_ops or ## _verifier_ops
to the names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f1174f77b5 ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perf PMU drivers using AUX buffers cannot be built as modules unless
the AUX helpers are exported.
This patch exports perf_aux_output_{begin,end,skip} and perf_get_aux to
modules.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Any modular driver using cluster-affine PPIs needs to be able to call
irq_get_percpu_devid_partition so that it can enable the IRQ on the
correct subset of CPUs.
This patch exports the symbol so that it can be called from within a
module.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This adds two tracepoint to the cpumap. One for the enqueue side
trace_xdp_cpumap_enqueue() and one for the kthread dequeue side
trace_xdp_cpumap_kthread().
To mitigate the tracepoint overhead, these are invoked during the
enqueue/dequeue bulking phases, thus amortizing the cost.
The obvious use-cases are for debugging and monitoring. The
non-intuitive use-case is using these as a feedback loop to know the
system load. One can imagine auto-scaling by reducing, adding or
activating more worker CPUs on demand.
V4: tracepoint remove time_limit info, instead add sched info
V8: intro struct bpf_cpu_map_entry members cpu+map_id in this patch
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes cpumap functional, by adding SKB allocation and
invoking the network stack on the dequeuing CPU.
For constructing the SKB on the remote CPU, the xdp_buff in converted
into a struct xdp_pkt, and it mapped into the top headroom of the
packet, to avoid allocating separate mem. For now, struct xdp_pkt is
just a cpumap internal data structure, with info carried between
enqueue to dequeue.
If a driver doesn't have enough headroom it is simply dropped, with
return code -EOVERFLOW. This will be picked up the xdp tracepoint
infrastructure, to allow users to catch this.
V2: take into account xdp->data_meta
V4:
- Drop busypoll tricks, keeping it more simple.
- Skip RPS and Generic-XDP-recursive-reinjection, suggested by Alexei
V5: correct RCU read protection around __netif_receive_skb_core.
V6: Setting TASK_RUNNING vs TASK_INTERRUPTIBLE based on talk with Rik van Riel
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch connects cpumap to the xdp_do_redirect_map infrastructure.
Still no SKB allocation are done yet. The XDP frames are transferred
to the other CPU, but they are simply refcnt decremented on the remote
CPU. This served as a good benchmark for measuring the overhead of
remote refcnt decrement. If driver page recycle cache is not
efficient then this, exposes a bottleneck in the page allocator.
A shout-out to MST's ptr_ring, which is the secret behind is being so
efficient to transfer memory pointers between CPUs, without constantly
bouncing cache-lines between CPUs.
V3: Handle !CONFIG_BPF_SYSCALL pointed out by kbuild test robot.
V4: Make Generic-XDP aware of cpumap type, but don't allow redirect yet,
as implementation require a separate upstream discussion.
V5:
- Fix a maybe-uninitialized pointed out by kbuild test robot.
- Restrict bpf-prog side access to cpumap, open when use-cases appear
- Implement cpu_map_enqueue() as a more simple void pointer enqueue
V6:
- Allow cpumap type for usage in helper bpf_redirect_map,
general bpf-prog side restriction moved to earlier patch.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'cpumap' is primarily used as a backend map for XDP BPF helper
call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'.
This patch implement the main part of the map. It is not connected to
the XDP redirect system yet, and no SKB allocation are done yet.
The main concern in this patch is to ensure the datapath can run
without any locking. This adds complexity to the setup and tear-down
procedure, which assumptions are extra carefully documented in the
code comments.
V2:
- make sure array isn't larger than NR_CPUS
- make sure CPUs added is a valid possible CPU
V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl>
V5:
- Restrict map allocation to root / CAP_SYS_ADMIN
- WARN_ON_ONCE if queue is not empty on tear-down
- Return -EPERM on memlock limit instead of -ENOMEM
- Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup()
- Moved cpu_map_enqueue() to next patch
V6: all notice by Daniel Borkmann
- Fix err return code in cpu_map_alloc() introduced in V5
- Move cpu_possible() check after max_entries boundary check
- Forbid usage initially in check_map_func_compatibility()
V7:
- Fix alloc error path spotted by Daniel Borkmann
- Did stress test adding+removing CPUs from the map concurrently
- Fixed refcnt issue on cpu_map_entry, kthread started too soon
- Make sure packets are flushed during tear-down, involved use of
rcu_barrier() and kthread_run only exit after queue is empty
- Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring
V8:
- Nitpicking comments and gramma by Edward Cree
- Fix missing semi-colon introduced in V7 due to rebasing
- Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_settimeofday() is a wrapper around do_settimeofday64(), so that function
can be called directly. The wrapper can be removed once the last user is
gone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Link: https://lkml.kernel.org/r/20171013183452.3635956-1-arnd@arndb.de
This is a follow-up to commit 5c4994102f ("posix-timers: Use
get_timespec64() and put_timespec64()"), which left two system call using
copy_from_user()/copy_to_user().
Change them as well for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Link: https://lkml.kernel.org/r/20171013183009.3442318-1-arnd@arndb.de
The one and only user of FTRACE_OPS_FL_PER_CPU is gone, remove the
lot.
Link: http://lkml.kernel.org/r/20171011080224.372422809@infradead.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ops->flags _should_ be 0 at this point, so setting the flag using
bitwise or is a bit daft.
Link: http://lkml.kernel.org/r/20171011080224.315585202@infradead.org
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function-trace <-> perf interface is a tad messed up. Where all
the other trace <-> perf interfaces use a single trace hook
registration and use per-cpu RCU based hlist to iterate the events,
function-trace actually needs multiple hook registrations in order to
minimize function entry patching when filters are present.
The end result is that we iterate events both on the trace hook and on
the hlist, which results in reporting events multiple times.
Since function-trace cannot use the regular scheme, fix it the other
way around, use singleton hlists.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Revert commit:
75e8387685 ("perf/ftrace: Fix double traces of perf on ftrace:function")
The reason I instantly stumbled on that patch is that it only addresses the
ftrace situation and doesn't mention the other _5_ places that use this
interface. It doesn't explain why those don't have the problem and if not, why
their solution doesn't work for ftrace.
It doesn't, but this is just putting more duct tape on.
Link: http://lkml.kernel.org/r/20171011080224.200565770@infradead.org
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
All the trace events defined in include/trace/events/bpf.h are only
used when CONFIG_BPF_SYSCALL is defined. But this file gets included by
include/linux/bpf_trace.h which is included by the networking code with
CREATE_TRACE_POINTS defined.
If a trace event is created but not used it still has data structures
and functions created for its use, even though nothing is using them.
To not waste space, do not define the BPF trace events in bpf.h unless
CONFIG_BPF_SYSCALL is defined.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix unfortunate mistake in the GICv3 ITS binding example
- Two fixes for the recently merged GICv4 support
- GICv3 ITS 52bit PA fixes
- Generic irqchip mask-ack fix, and its application to the tango irqchip
-----BEGIN PGP SIGNATURE-----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=yAAX
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 4.14-rc5 from Marc Zyngier:
- Fix unfortunate mistake in the GICv3 ITS binding example
- Two fixes for the recently merged GICv4 support
- GICv3 ITS 52bit PA fixes
- Generic irqchip mask-ack fix, and its application to the tango irqchip
Pull perf fixes from Ingo Molnar:
"Some tooling fixes plus three kernel fixes: a memory leak fix, a
statistics fix and a crash fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix memory leaks on allocation failures
perf/core: Fix cgroup time when scheduling descendants
perf/core: Avoid freeing static PMU contexts when PMU is unregistered
tools include uapi bpf.h: Sync kernel ABI header with tooling header
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
perf callchain: Compare dsos (as well) for CCKEY_FUNCTION
Pull locking fixes from Ingo Molnar:
"Two lockdep fixes for bugs introduced by the cross-release dependency
tracking feature - plus a commit that disables it because performance
regressed in an absymal fashion on some systems"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Disable cross-release features for now
locking/selftest: Avoid false BUG report
locking/lockdep: Fix stacktrace mess
Pull irq fixes from Ingo Molnar:
"A CPU hotplug related fix, plus two related sanity checks"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs
genirq/cpuhotplug: Add sanity check for effective affinity mask
genirq: Warn when effective affinity is not updated
Use a simplified is_valid_access() callback when verifier
is used for program analysis by non-host JITs. This allows
us to teach the verifier about packet start and packet end
offsets for direct packet access.
We can extend the callback as needed but for most packet
processing needs there isn't much more the offloads may
require.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Any usage of the irq_gc_mask_disable_reg_and_ack() function has
been replaced with the desired functionality.
The incorrect and ambiguously named function is removed here to
prevent accidental misuse.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The irq_gc_mask_disable_reg_and_ack() function name implies that it
provides the combined functions of irq_gc_mask_disable_reg() and
irq_gc_ack(). However, the implementation does not actually do
that since it writes the mask instead of the disable register. It
also does not maintain the mask cache which makes it inappropriate
to use with other masking functions.
In addition, commit 659fb32d1b ("genirq: replace irq_gc_ack() with
{set,clr}_bit variants (fwd)") effectively renamed irq_gc_ack() to
irq_gc_ack_set_bit() so this function probably should have also been
renamed at that time.
The generic chip code currently provides three functions for use
with the irq_mask member of the irq_chip structure and two functions
for use with the irq_ack member of the irq_chip structure. These
functions could be combined into six functions for use with the
irq_mask_ack member of the irq_chip structure. However, since only
one of the combinations is currently used, only the function
irq_gc_mask_disable_and_ack_set() is added by this commit.
The '_reg' and '_bit' portions of the base function name were left
out of the new combined function name in an attempt to keep the
function name length manageable with the 80 character source code
line length while still allowing the distinct aspects of each
combination to be captured by the name.
If other combinations are desired in the future please add them to
the irq generic chip library at that time.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
After trace_selftest_startup_sched_switch is removed, trace_test_buffer()
is only used sometimes, leading to this warning:
kernel/trace/trace_selftest.c:62:12: error: 'trace_test_buffer' defined but not used [-Werror=unused-function]
There is no simple #ifdef condition that captures well whether the
function is in fact used or not, so marking it as __maybe_unused is
probably the best way to shut up the warning. The function will then
be silently dropped when there is no user.
Link: http://lkml.kernel.org/r/20171013142227.1273469-1-arnd@arndb.de
Fixes: d8c4deee6d ("tracing: Remove obsolete sched_switch tracer selftest")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The variable printk_safe_irq_ready is set and never cleared at system
boot up, when there's only one CPU active. It is set before other
CPUs come on line. Also, it is extremely unlikely that an NMI would
trigger this early in boot up (which I wonder why we even have this
variable at all).
Also mark the printk_safe_irq_ready as read mostly, as it is set at
system boot up, and never touched again.
Link: http://lkml.kernel.org/r/20171011124647.7781f98f@gandalf.local.home
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull livepatching fix from Jiri Kosina:
- bugfix for handling of coming modules (incorrect handling of failure)
from Joe Lawrence
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: unpatch all klp_objects if klp_module_coming fails
Merge waitid() fix from Kees Cook.
I'd have hoped that the unsafe_{get|put}_user() naming would have
avoided these kinds of stupid bugs, but no such luck.
* waitid-fix:
waitid(): Add missing access_ok() checks
Variable old_flags is being assigned but is never read; it is redundant
and can be removed.
Cleans up clang warning: Value stored to 'old_flags' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an incoming module is considered for livepatching by
klp_module_coming(), it iterates over multiple patches and multiple
kernel objects in this order:
list_for_each_entry(patch, &klp_patches, list) {
klp_for_each_object(patch, obj) {
which means that if one of the kernel objects fails to patch,
klp_module_coming()'s error path needs to unpatch and cleanup any kernel
objects that were already patched by a previous patch.
Reported-by: Miroslav Benes <mbenes@suse.cz>
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit fbb1fb4ad4.
This was not the proper fix, lets cleanly revert it, so that
following patch can be carried to stable versions.
sock_cgroup_ptr() callers do not expect a NULL return value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Filters should be cleared of init functions during freeing of init
memory when the ftrace dyn records are released. However in current
code, the filters are left as is. This patch clears the hashes of the
saved init functions when the init memory is freed. This fixes the
following issue reproducible with the following sequence of commands for
a test module:
================================================
void bar(void)
{
printk(KERN_INFO "bar!\n");
}
void foo(void)
{
printk(KERN_INFO "foo!\n");
bar();
}
static int __init hello_init(void)
{
printk(KERN_INFO "Hello world!\n");
foo();
return 0;
}
static void __exit hello_cleanup(void)
{
printk(KERN_INFO "Cleaning up module.\n");
}
module_init(hello_init);
module_exit(hello_cleanup);
================================================
Commands:
echo '*:mod:test' > /d/tracing/set_ftrace_filter
echo function > /d/tracing/current_tracer
modprobe test
rmmod test
sleep 1
modprobe test
cat /d/tracing/set_ftrace_filter
Behavior without patch: Init function is still in the filter
Expected behavior: Shouldn't have any of the filters set
Link: http://lkml.kernel.org/r/20171009192931.56401-1-joelaf@google.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Preempt and irq trace events can be used for tracing the start and
end of an atomic section which can be used by a trace viewer like
systrace to graphically view the start and end of an atomic section and
correlate them with latencies and scheduling issues.
This also serves as a prelude to using synthetic events or probes to
rewrite the preempt and irqsoff tracers, along with numerous benefits of
using trace events features for these events.
Link: http://lkml.kernel.org/r/20171006005432.14244-3-joelaf@google.com
Link: http://lkml.kernel.org/r/20171010225137.17370-1-joelaf@google.com
Cc: Peter Zilstra <peterz@infradead.org>
Cc: kernel-team@android.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=yvYp
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixlet from Kees Cook:
"Minor seccomp fix for v4.14-rc5. I debated sending this at all for
v4.14, but since it fixes a minor issue in the prior fix, which also
went to -stable, it seemed better to just get all of it cleaned up
right now.
- fix missed "static" to avoid Sparse warning (Colin King)"
* tag 'seccomp-v4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: make function __get_seccomp_filter static
Verifier log buffer can be quite large (up to 16MB currently).
As Eric Dumazet points out if we allow multiple verification
requests to proceed simultaneously, malicious user may use the
verifier as a way of allocating large amounts of unswappable
memory to OOM the host.
Switch to a strategy of allocating a smaller buffer (1024B)
and writing it out into the user buffer after every print.
While at it remove the old BUG_ON().
This is in preparation of the global verifier lock removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Separate the instruction printing into a standalone source file.
This way sneaky code from tools/ can compile it in directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The biggest piece of global state protected by the verifier lock
is the verifier_log. Move that log to struct bpf_verifier_env.
struct bpf_verifier_env has to be passed now to all invocations
of verbose().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Put the loose log_* variables into a structure. This will make
it simpler to remove the global verifier state in following patches.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function __get_seccomp_filter is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '__get_seccomp_filter' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 66a733ea6b ("seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Josef reported a HARDIRQ-safe -> HARDIRQ-unsafe lock order detected by
lockdep:
[ 1270.472259] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 1270.472783] 4.14.0-rc1-xfstests-12888-g76833e8 #110 Not tainted
[ 1270.473240] -----------------------------------------------------
[ 1270.473710] kworker/u5:2/5157 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 1270.474239] (&(&lock->wait_lock)->rlock){+.+.}, at: [<ffffffff8da253d2>] __mutex_unlock_slowpath+0xa2/0x280
[ 1270.474994]
[ 1270.474994] and this task is already holding:
[ 1270.475440] (&pool->lock/1){-.-.}, at: [<ffffffff8d2992f6>] worker_thread+0x366/0x3c0
[ 1270.476046] which would create a new lock dependency:
[ 1270.476436] (&pool->lock/1){-.-.} -> (&(&lock->wait_lock)->rlock){+.+.}
[ 1270.476949]
[ 1270.476949] but this new dependency connects a HARDIRQ-irq-safe lock:
[ 1270.477553] (&pool->lock/1){-.-.}
...
[ 1270.488900] to a HARDIRQ-irq-unsafe lock:
[ 1270.489327] (&(&lock->wait_lock)->rlock){+.+.}
...
[ 1270.494735] Possible interrupt unsafe locking scenario:
[ 1270.494735]
[ 1270.495250] CPU0 CPU1
[ 1270.495600] ---- ----
[ 1270.495947] lock(&(&lock->wait_lock)->rlock);
[ 1270.496295] local_irq_disable();
[ 1270.496753] lock(&pool->lock/1);
[ 1270.497205] lock(&(&lock->wait_lock)->rlock);
[ 1270.497744] <Interrupt>
[ 1270.497948] lock(&pool->lock/1);
, which will cause a irq inversion deadlock if the above lock scenario
happens.
The root cause of this safe -> unsafe lock order is the
mutex_unlock(pool->manager_arb) in manage_workers() with pool->lock
held.
Unlocking mutex while holding an irq spinlock was never safe and this
problem has been around forever but it never got noticed because the
only time the mutex is usually trylocked while holding irqlock making
actual failures very unlikely and lockdep annotation missed the
condition until the recent b9c16a0e1f ("locking/mutex: Fix
lockdep_assert_held() fail").
Using mutex for pool->manager_arb has always been a bit of stretch.
It primarily is an mechanism to arbitrate managership between workers
which can easily be done with a pool flag. The only reason it became
a mutex is that pool destruction path wants to exclude parallel
managing operations.
This patch replaces the mutex with a new pool flag POOL_MANAGER_ACTIVE
and make the destruction path wait for the current manager on a wait
queue.
v2: Drop unnecessary flag clearing before pool destruction as
suggested by Boqun.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: stable@vger.kernel.org
The fanotify interface allows user space daemons to make access
control decisions. Under common criteria requirements, we need to
optionally record decisions based on policy. This patch adds a bit mask,
FAN_AUDIT, that a user space daemon can 'or' into the response decision
which will tell the kernel that it made a decision and record it.
It would be used something like this in user space code:
response.response = FAN_DENY | FAN_AUDIT;
write(fd, &response, sizeof(struct fanotify_response));
When the syscall ends, the audit system will record the decision as a
AUDIT_FANOTIFY auxiliary record to denote that the reason this event
occurred is the result of an access control decision from fanotify
rather than DAC or MAC policy.
A sample event looks like this:
type=PATH msg=audit(1504310584.332:290): item=0 name="./evil-ls"
inode=1319561 dev=fc:03 mode=0100755 ouid=1000 ogid=1000 rdev=00:00
obj=unconfined_u:object_r:user_home_t:s0 nametype=NORMAL
type=CWD msg=audit(1504310584.332:290): cwd="/home/sgrubb"
type=SYSCALL msg=audit(1504310584.332:290): arch=c000003e syscall=2
success=no exit=-1 a0=32cb3fca90 a1=0 a2=43 a3=8 items=1 ppid=901
pid=959 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000
fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts1 ses=3 comm="bash"
exe="/usr/bin/bash" subj=unconfined_u:unconfined_r:unconfined_t:
s0-s0:c0.c1023 key=(null)
type=FANOTIFY msg=audit(1504310584.332:290): resp=2
Prior to using the audit flag, the developer needs to call
fanotify_init or'ing in FAN_ENABLE_AUDIT to ensure that the kernel
supports auditing. The calling process must also have the CAP_AUDIT_WRITE
capability.
Signed-off-by: sgrubb <sgrubb@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Outside of the locking code itself, {read,spin,write}_can_lock() have no
users in tree. Apparmor (the last remaining user of write_can_lock()) got
moved over to lockdep by the previous patch.
This patch removes the use of {read,spin,write}_can_lock() from the
BUILD_LOCK_OPS macro, deferring to the trylock operation for testing the
lock status, and subsequently removes the unused macros altogether. They
aren't guaranteed to work in a concurrent environment and can give
incorrect results in the case of qrwlock.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1507055129-12300-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
find_idlest_group() returns NULL when the local group is idlest. The
caller then continues the find_idlest_group() search at a lower level
of the current CPU's sched_domain hierarchy. find_idlest_group_cpu() is
not consulted and, crucially, @new_cpu is not updated. This means the
search is pointless and we return @prev_cpu from select_task_rq_fair().
This is fixed by initialising @new_cpu to @cpu instead of @prev_cpu.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-6-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When 'p' is not allowed on any of the CPUs in the sched_domain, we
currently return NULL from find_idlest_group(), and pointlessly
continue the search on lower sched_domain levels (where 'p' is also not
allowed) before returning prev_cpu regardless (as we have not updated
new_cpu).
Add an explicit check for this case, and add a comment to
find_idlest_group(). Now when find_idlest_group() returns NULL, it always
means that the local group is allowed and idlest.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-5-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the local group is not allowed we do not modify this_*_load from
their initial value of 0. That means that the load checks at the end
of find_idlest_group cause us to incorrectly return NULL. Fixing the
initial values to ULONG_MAX means we will instead return the idlest
remote group in that case.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-4-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
83a0a96a5f ("sched/fair: Leverage the idle state info when choosing the "idlest" cpu")
find_idlest_group_cpu() (formerly find_idlest_cpu) no longer returns -1,
so we can simplify the checking of the return value in find_idlest_cpu().
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-3-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for changes that would otherwise require adding a new
level of indentation to the while(sd) loop, create a new function
find_idlest_cpu() which contains this loop, and rename the existing
find_idlest_cpu() to find_idlest_group_cpu().
Code inside the while(sd) loop is unchanged. @new_cpu is added as a
variable in the new function, with the same initial value as the
@new_cpu in select_task_rq_fair().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-2-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "goto force_balance" here is intended to mitigate the fact that
avg_load calculations can result in bad placement decisions when
priority is asymmetrical.
The original commit that adds it:
fab476228b ("sched: Force balancing on newidle balance if local group has capacity")
explains:
Under certain situations, such as a niced down task (i.e. nice =
-15) in the presence of nr_cpus NICE0 tasks, the niced task lands
on a sched group and kicks away other tasks because of its large
weight. This leads to sub-optimal utilization of the
machine. Even though the sched group has capacity, it does not
pull tasks because sds.this_load >> sds.max_load, and f_b_g()
returns NULL.
A similar but inverted issue also affects ARM big.LITTLE (asymmetrical CPU
capacity) systems - consider 8 always-running, same-priority tasks on a
system with 4 "big" and 4 "little" CPUs. Suppose that 5 of them end up on
the "big" CPUs (which will be represented by one sched_group in the DIE
sched_domain) and 3 on the "little" (the other sched_group in DIE), leaving
one CPU unused. Because the "big" group has a higher group_capacity its
avg_load may not present an imbalance that would cause migrating a
task to the idle "little".
The force_balance case here solves the problem but currently only for
CPU_NEWLY_IDLE balances, which in theory might never happen on the
unused CPU. Including CPU_IDLE in the force_balance case means
there's an upper bound on the time before we can attempt to solve the
underutilization: after DIE's sd->balance_interval has passed the
next nohz balance kick will help us out.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170807163900.25180-1-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We use task_util() in find_idlest_group() via capacity_spare_wake().
This task_util() updated in wake_cap(). However wake_cap() is not the
only reason for ending up in find_idlest_group() - we could have been sent
there by wake_wide(). So explicitly sync the task util with prev_cpu
when we are about to head to find_idlest_group().
We could simply do this at the beginning of
select_task_rq_fair() (i.e. irrespective of whether we're heading to
select_idle_sibling() or find_idlest_group() & co), but I didn't want to
slow down the select_idle_sibling() path more than necessary.
Don't do this during fork balancing, we won't need the task_util and
we'd just clobber the last_update_time, which is supposed to be 0.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andres Oportus <andresoportus@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20170808095519.10077-1-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As a first step this patch makes cfs_tasks list as MRU one.
It means, that when a next task is picked to run on physical
CPU it is moved to the front of the list.
Therefore, the cfs_tasks list is more or less sorted (except
woken tasks) starting from recently given CPU time tasks toward
tasks with max wait time in a run-queue, i.e. MRU list.
Second, as part of the load balance operation, this approach
starts detach_tasks()/detach_one_task() from the tail of the
queue instead of the head, giving some advantages:
- tends to pick a task with highest wait time;
- tasks located in the tail are less likely cache-hot,
therefore the can_migrate_task() decision is higher.
hackbench illustrates slightly better performance. For example
doing 1000 samples and 40 groups on i5-3320M CPU, it shows below
figures:
default: 0.657 avg
patched: 0.646 avg
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913102430.8985-2-urezki@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On AMD Family17h-based (EPYC) system, a logical NUMA node can contain
upto 8 cores (16 threads) with the following topology.
----------------------------
C0 | T0 T1 | || | T0 T1 | C4
--------| || |--------
C1 | T0 T1 | L3 || L3 | T0 T1 | C5
--------| || |--------
C2 | T0 T1 | #0 || #1 | T0 T1 | C6
--------| || |--------
C3 | T0 T1 | || | T0 T1 | C7
----------------------------
Here, there are 2 last-level (L3) caches per logical NUMA node.
A socket can contain upto 4 NUMA nodes, and a system can support
upto 2 sockets. With full system configuration, current scheduler
creates 4 sched domains:
domain0 SMT (span a core)
domain1 MC (span a last-level-cache)
domain2 NUMA (span a socket: 4 nodes)
domain3 NUMA (span a system: 8 nodes)
Note that there is no domain to represent cpus spaning a logical
NUMA node. With this hierarchy of sched domains, the scheduler does
not balance properly in the following cases:
Case1:
When running 8 tasks, a properly balanced system should
schedule a task per logical NUMA node. This is not the case for
the current scheduler.
Case2:
In some cases, threads are scheduled on the same cpu, while other
cpus are idle. This results in run-to-run inconsistency. For example:
taskset -c 0-7 sysbench --num-threads=8 --test=cpu \
--cpu-max-prime=100000 run
Total execution time ranges from 25.1s to 33.5s depending on threads
placement, where 25.1s is when all 8 threads are balanced properly
on 8 cpus.
Introducing NUMA identity node sched domain, which is based on how
SRAT/SLIT table define a logical NUMA node. This results in the following
hierarchy of sched domains on the same system described above.
domain0 SMT (span a core)
domain1 MC (span a last-level-cache)
domain2 NODE (span a logical NUMA node)
domain3 NUMA (span a socket: 4 nodes)
domain4 NUMA (span a system: 8 nodes)
This fixes the improper load balancing cases mentioned above.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/1504768805-46716-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The normal x86_topology on NHM+ machines degenerates because the MC
and CPU domains are of the same size, therefore MC inherits
SD_PREFER_SIBLING from CPU (which then gets taken out). The result is
that we'll spread tasks across the first NUMA level in order to
maximize cache utilization.
However, for the x86_numa_in_package_topology we loose the CPU domain,
and we'll not have SD_PREFER_SIBLING set anywhere, giving a distinct
difference in behaviour.
Commit:
8e7fbcbc22 ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs")
made a fail by not preserving the SD_PREFER_SIBLING for the !power_saving
case on both CPU and MC.
Then commit:
6956dc568f ("sched/numa: Add SD_PERFER_SIBLING to CPU domain")
adds it back to the CPU but not MC.
Restore that now, such that we get consistent spreading behaviour wrt
L3 and NUMA.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__dl_sub() is more meaningful as a name, and is more consistent
with the naming of the dual function (__dl_add()).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a bug introduced in:
72f9f3fdc9 ("sched/deadline: Remove dl_new from struct sched_dl_entity")
After that commit, when switching to -deadline if the scheduling
deadline of a task is in the past then switched_to_dl() calls
setup_new_entity() to properly initialize the scheduling deadline
and runtime.
The problem is that the task is enqueued _before_ having its parameters
initialized by setup_new_entity(), and this can cause problems.
For example, a task with its out-of-date deadline in the past will
potentially be enqueued as the highest priority one; however, its
adjusted deadline may not be the earliest one.
This patch fixes the problem by initializing the task's parameters before
enqueuing it.
Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steve requested better names for the new task-state helper functions.
So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
quiet_vmstat() is an expensive function that only makes sense when we
go into NOHZ.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aubrey.li@linux.intel.com
Cc: cl@linux.com
Cc: fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While load_balance() masks the source CPUs against active_mask, it had
a hole against the destination CPU. Ensure the destination CPU is also
part of the 'domain-mask & active-mask' set.
Reported-by: Levin, Alexander (Sasha Levin) <alexander.levin@verizon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 77d1dfda0e ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The trivial wake_affine_idle() implementation is very good for a
number of workloads, but it comes apart at the moment there are no
idle CPUs left, IOW. the overloaded case.
hackbench:
NO_WA_WEIGHT WA_WEIGHT
hackbench-20 : 7.362717561 seconds 6.450509391 seconds
(win)
netperf:
NO_WA_WEIGHT WA_WEIGHT
TCP_SENDFILE-1 : Avg: 54524.6 Avg: 52224.3
TCP_SENDFILE-10 : Avg: 48185.2 Avg: 46504.3
TCP_SENDFILE-20 : Avg: 29031.2 Avg: 28610.3
TCP_SENDFILE-40 : Avg: 9819.72 Avg: 9253.12
TCP_SENDFILE-80 : Avg: 5355.3 Avg: 4687.4
TCP_STREAM-1 : Avg: 41448.3 Avg: 42254
TCP_STREAM-10 : Avg: 24123.2 Avg: 25847.9
TCP_STREAM-20 : Avg: 15834.5 Avg: 18374.4
TCP_STREAM-40 : Avg: 5583.91 Avg: 5599.57
TCP_STREAM-80 : Avg: 2329.66 Avg: 2726.41
TCP_RR-1 : Avg: 80473.5 Avg: 82638.8
TCP_RR-10 : Avg: 72660.5 Avg: 73265.1
TCP_RR-20 : Avg: 52607.1 Avg: 52634.5
TCP_RR-40 : Avg: 57199.2 Avg: 56302.3
TCP_RR-80 : Avg: 25330.3 Avg: 26867.9
UDP_RR-1 : Avg: 108266 Avg: 107844
UDP_RR-10 : Avg: 95480 Avg: 95245.2
UDP_RR-20 : Avg: 68770.8 Avg: 68673.7
UDP_RR-40 : Avg: 76231 Avg: 75419.1
UDP_RR-80 : Avg: 34578.3 Avg: 35639.1
UDP_STREAM-1 : Avg: 64684.3 Avg: 66606
UDP_STREAM-10 : Avg: 52701.2 Avg: 52959.5
UDP_STREAM-20 : Avg: 30376.4 Avg: 29704
UDP_STREAM-40 : Avg: 15685.8 Avg: 15266.5
UDP_STREAM-80 : Avg: 8415.13 Avg: 7388.97
(wins and losses)
sysbench:
NO_WA_WEIGHT WA_WEIGHT
sysbench-mysql-2 : 2135.17 per sec. 2142.51 per sec.
sysbench-mysql-5 : 4809.68 per sec. 4800.19 per sec.
sysbench-mysql-10 : 9158.59 per sec. 9157.05 per sec.
sysbench-mysql-20 : 14570.70 per sec. 14543.55 per sec.
sysbench-mysql-40 : 22130.56 per sec. 22184.82 per sec.
sysbench-mysql-80 : 20995.56 per sec. 21904.18 per sec.
sysbench-psql-2 : 1679.58 per sec. 1705.06 per sec.
sysbench-psql-5 : 3797.69 per sec. 3879.93 per sec.
sysbench-psql-10 : 7253.22 per sec. 7258.06 per sec.
sysbench-psql-20 : 11166.75 per sec. 11220.00 per sec.
sysbench-psql-40 : 17277.28 per sec. 17359.78 per sec.
sysbench-psql-80 : 17112.44 per sec. 17221.16 per sec.
(increase on the top end)
tbench:
NO_WA_WEIGHT
Throughput 685.211 MB/sec 2 clients 2 procs max_latency=0.123 ms
Throughput 1596.64 MB/sec 5 clients 5 procs max_latency=0.119 ms
Throughput 2985.47 MB/sec 10 clients 10 procs max_latency=0.262 ms
Throughput 4521.15 MB/sec 20 clients 20 procs max_latency=0.506 ms
Throughput 9438.1 MB/sec 40 clients 40 procs max_latency=2.052 ms
Throughput 8210.5 MB/sec 80 clients 80 procs max_latency=8.310 ms
WA_WEIGHT
Throughput 697.292 MB/sec 2 clients 2 procs max_latency=0.127 ms
Throughput 1596.48 MB/sec 5 clients 5 procs max_latency=0.080 ms
Throughput 2975.22 MB/sec 10 clients 10 procs max_latency=0.254 ms
Throughput 4575.14 MB/sec 20 clients 20 procs max_latency=0.502 ms
Throughput 9468.65 MB/sec 40 clients 40 procs max_latency=2.069 ms
Throughput 8631.73 MB/sec 80 clients 80 procs max_latency=8.605 ms
(increase on the top end)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric reported a sysbench regression against commit:
3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Similarly, Rik was looking at the NAS-lu.C benchmark, which regressed
against his v3.10 enterprise kernel.
PRE (current tip/master):
ivb-ep sysbench:
2: [30 secs] transactions: 64110 (2136.94 per sec.)
5: [30 secs] transactions: 143644 (4787.99 per sec.)
10: [30 secs] transactions: 274298 (9142.93 per sec.)
20: [30 secs] transactions: 418683 (13955.45 per sec.)
40: [30 secs] transactions: 320731 (10690.15 per sec.)
80: [30 secs] transactions: 355096 (11834.28 per sec.)
hsw-ex NAS:
OMP_PROC_BIND/lu.C.x_threads_144_run_1.log: Time in seconds = 18.01
OMP_PROC_BIND/lu.C.x_threads_144_run_2.log: Time in seconds = 17.89
OMP_PROC_BIND/lu.C.x_threads_144_run_3.log: Time in seconds = 17.93
lu.C.x_threads_144_run_1.log: Time in seconds = 434.68
lu.C.x_threads_144_run_2.log: Time in seconds = 405.36
lu.C.x_threads_144_run_3.log: Time in seconds = 433.83
POST (+patch):
ivb-ep sysbench:
2: [30 secs] transactions: 64494 (2149.75 per sec.)
5: [30 secs] transactions: 145114 (4836.99 per sec.)
10: [30 secs] transactions: 278311 (9276.69 per sec.)
20: [30 secs] transactions: 437169 (14571.60 per sec.)
40: [30 secs] transactions: 669837 (22326.73 per sec.)
80: [30 secs] transactions: 631739 (21055.88 per sec.)
hsw-ex NAS:
lu.C.x_threads_144_run_1.log: Time in seconds = 23.36
lu.C.x_threads_144_run_2.log: Time in seconds = 22.96
lu.C.x_threads_144_run_3.log: Time in seconds = 22.52
This patch takes out all the shiny wake_affine() stuff and goes back to
utter basics. Between the two CPUs involved with the wakeup (the CPU
doing the wakeup and the CPU we ran on previously) pick the CPU we can
run on _now_.
This restores much of the regressions against the older kernels,
but leaves some ground in the overloaded case. The default-enabled
WA_WEIGHT (which will be introduced in the next patch) is an attempt
to address the overloaded situation.
Reported-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jinpuwang@gmail.com
Cc: vcaputo@pengaru.com
Fixes: 3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
1fd7e41699 ("perf/core: Remove perf_cpu_context::unique_pmu")
... when a PMU is unregistered then its associated ->pmu_cpu_context is
unconditionally freed. Whilst this is fine for dynamically allocated
context types (i.e. those registered using perf_invalid_context), this
causes a problem for sharing of static contexts such as
perf_{sw,hw}_context, which are used by multiple built-in PMUs and
effectively have a global lifetime.
Whilst testing the ARM SPE driver, which must use perf_sw_context to
support per-task AUX tracing, unregistering the driver as a result of a
module unload resulted in:
Unable to handle kernel NULL pointer dereference at virtual address 00000038
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: [last unloaded: arm_spe_pmu]
PC is at ctx_resched+0x38/0xe8
LR is at perf_event_exec+0x20c/0x278
[...]
ctx_resched+0x38/0xe8
perf_event_exec+0x20c/0x278
setup_new_exec+0x88/0x118
load_elf_binary+0x26c/0x109c
search_binary_handler+0x90/0x298
do_execveat_common.isra.14+0x540/0x618
SyS_execve+0x38/0x48
since the software context has been freed and the ctx.pmu->pmu_disable_count
field has been set to NULL.
This patch fixes the problem by avoiding the freeing of static PMU contexts
altogether. Whilst the sharing of dynamic contexts is questionable, this
actually requires the caller to share their context pointer explicitly
and so the burden is on them to manage the object lifetime.
Reported-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1fd7e41699 ("perf/core: Remove perf_cpu_context::unique_pmu")
Link: http://lkml.kernel.org/r/1507040450-7730-1-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is some complication between check_prevs_add() and
check_prev_add() wrt. saving stack traces. The problem is that we want
to be frugal with saving stack traces, since it consumes static
resources.
We'll only know in check_prev_add() if we need the trace, but we can
call into it multiple times. So we want to do on-demand and re-use.
A further complication is that check_prev_add() can drop graph_lock
and mess with our static resources.
In any case, the current state; after commit:
ce07a9415f ("locking/lockdep: Make check_prev_add() able to handle external stack_trace")
is that we'll assume the trace contains valid data once
check_prev_add() returns '2'. However, as noted by Josh, this is
false, check_prev_add() can return '2' before having saved a trace,
this then result in the possibility of using uninitialized data.
Testing, as reported by Wu, shows a NULL deref.
So simplify.
Since the graph_lock() thing is a debug path that hasn't
really been used in a long while, take it out back and avoid the
head-ache.
Further initialize the stack_trace to a known 'empty' state; as long
as nr_entries == 0, nothing should deref entries. We can then use the
'entries == NULL' test for a valid trace / on-demand saving.
Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ce07a9415f ("locking/lockdep: Make check_prev_add() able to handle external stack_trace")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sk_clone_lock() might run while TCP/DCCP listener already vanished.
In order to prevent use after free, it is better to defer cgroup_sk_alloc()
to the point we know both parent and child exist, and from process context.
Fixes: e994b2f0fb ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix object leak on IPSEC offload failure, from Steffen Klassert.
2) Fix range checks in ipset address range addition operations, from
Jozsef Kadlecsik.
3) Fix pernet ops unregistration order in ipset, from Florian Westphal.
4) Add missing netlink attribute policy for nl80211 packet pattern
attrs, from Peng Xu.
5) Fix PPP device destruction race, from Guillaume Nault.
6) Write marks get lost when BPF verifier processes R1=R2 register
assignments, causing incorrect liveness information and less state
pruning. Fix from Alexei Starovoitov.
7) Fix blockhole routes so that they are marked dead and therefore not
cached in sockets, otherwise IPSEC stops working. From Steffen
Klassert.
8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan
net: thunderx: mark expected switch fall-throughs in nicvf_main()
udp: fix bcast packet reception
netlink: do not set cb_running if dump's start() errs
ipv4: Fix traffic triggered IPsec connections.
ipv6: Fix traffic triggered IPsec connections.
ixgbe: incorrect XDP ring accounting in ethtool tx_frame param
net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
Revert commit 1a8b6d76dc ("net:add one common config...")
ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register
ixgbe: Return error when getting PHY address if PHY access is not supported
netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'
netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook
tipc: Unclone message at secondary destination lookup
tipc: correct initialization of skb list
gso: fix payload length when gso_size is zero
mlxsw: spectrum_router: Avoid expensive lookup during route removal
bpf: fix liveness marking
doc: Fix typo "8023.ad" in bonding documentation
ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real
...
Right now, rcutorture warns if an rcu_torture_writer() kthread stalls,
but this warning is not always all that helpful. This commit therefore
makes the first such warning include a stack dump.
This in turn requires that sched_show_task() be exported to GPL modules,
so this commit makes that change as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When rcutorture sees the rcutorture.stall_cpu kernel boot parameter,
it loops with preemption disabled, which does in fact normally
generate an RCU CPU stall warning message. However, there are test
scenarios that need the stalling CPU to have interrupts disabled.
This commit therefore adds an rcutorture.stall_cpu_irqsoff kernel
boot parameter that causes the stalling CPU to disable interrupts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, RCU emits Suppress RCU CPU stall warnings during its
automatically initiated ftrace_dump() calls after detecting an error
condition, which can result in excessively excessive console output
and lost trace events. This commit therefore suppresses RCU CPU stall
warnings across any of these ftrace_dump() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, RCU allows tracing to continue when it automatically does
ftrace_dump() after detecting an error condition, which can result in
excessively large traces and lost trace events. This commit therefore
does a tracing_off() before any of these ftrace_dump() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One common question upon seeing an RCU CPU stall warning is "did
the stalled CPUs have interrupts disabled?" However, the current
stall warnings are silent on this point. This commit therefore
uses irq_work to check whether stalled CPUs still respond to IPIs,
and flags this state in the RCU CPU stall warning console messages.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is some confusion as to which of cond_resched() or
cond_resched_rcu_qs() should be added to long in-kernel loops.
This commit therefore eliminates the decision by adding RCU quiescent
states to cond_resched(). This commit also simplifies the code that
used to interact with cond_resched_rcu_qs(), and that now interacts with
cond_resched(), to reduce its overhead. This reduction is necessary to
allow the heavier-weight cond_resched_rcu_qs() mechanism to be invoked
everywhere that cond_resched() is invoked.
Part of that reduction in overhead converts the jiffies_till_sched_qs
kernel parameter to read-only at runtime, thus eliminating the need for
bounds checking.
Reported-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
[ paulmck: Keep PREEMPT=n cond_resched a no-op, per Peter Zijlstra. ]
The current implementation of synchronize_sched_expedited() incorrectly
assumes that resched_cpu() is unconditional, which it is not. This means
that synchronize_sched_expedited() can hang when resched_cpu()'s trylock
fails as follows (analysis by Neeraj Upadhyay):
o CPU1 is waiting for expedited wait to complete:
sync_rcu_exp_select_cpus
rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5
IPI sent to CPU5
synchronize_sched_expedited_wait
ret = swait_event_timeout(rsp->expedited_wq,
sync_rcu_preempt_exp_done(rnp_root),
jiffies_stall);
expmask = 0x20, CPU 5 in idle path (in cpuidle_enter())
o CPU5 handles IPI and fails to acquire rq lock.
Handles IPI
sync_sched_exp_handler
resched_cpu
returns while failing to try lock acquire rq->lock
need_resched is not set
o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to
idle (schedule() is not called).
o CPU 1 reports RCU stall.
Given that resched_cpu() is now used only by RCU, this commit fixes the
assumption by making resched_cpu() unconditional.
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Suggested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Commit 4788501606 ("irq_work: Implement remote queueing") provides
irq_work_on_queue() only for SMP builds. However, providing it simplifies
code that submits irq_work to lists of CPUs, eliminating the !SMP special
cases. This commit therefore maps irq_work_on_queue() to irq_work_on()
in !SMP builds, but validating the specified CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently the call_rcu_tasks() kthread is created upon first
invocation of call_rcu_tasks(). This has the advantage of avoiding
creation if there are never any invocations of call_rcu_tasks() and of
synchronize_rcu_tasks(), but it requires an unreliable heuristic to
determine when it is safe to create the kthread. For example, it is
not safe to create the kthread when call_rcu_tasks() is invoked with
a spinlock held, but there is no good way to detect this in !PREEMPT
kernels.
This commit therefore creates this kthread unconditionally at
core_initcall() time. If you don't want this kthread created, then
build with CONFIG_TASKS_RCU=n.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The pending-callbacks check in rcu_prepare_for_idle() is backwards.
It should accelerate if there are pending callbacks, but the check
rather uselessly accelerates only if there are no callbacks. This commit
therefore inverts this check.
Fixes: 15fecf89e4 ("srcu: Abstract multi-tail callback list handling")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 4.12.x
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim
Fedorenko.
2) Fix splat with mark restoration in xt_socket with non-full-sock,
patch from Subash Abhinov Kasiviswanathan.
3) ipset bogusly bails out when adding IPv4 range containing more than
2^31 addresses, from Jozsef Kadlecsik.
4) Incorrect pernet unregistration order in ipset, from Florian Westphal.
5) Races between dump and swap in ipset results in BUG_ON splats, from
Ross Lagerwall.
6) Fix chain renames in nf_tables, from JingPiao Chen.
7) Fix race in pernet codepath with ebtables table registration, from
Artem Savkov.
8) Memory leak in error path in set name allocation in nf_tables, patch
from Arvind Yadav.
9) Don't dump chain counters if they are not available, this fixes a
crash when listing the ruleset.
10) Fix out of bound memory read in strlcpy() in x_tables compat code,
from Eric Dumazet.
11) Make sure we only process TCP packets in SYNPROXY hooks, patch from
Lin Zhang.
12) Cannot load rules incrementally anymore after xt_bpf with pinned
objects, added in revision 1. From Shmulik Ladkani.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2c16d60332 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.
However this breaks subsequent iptables calls:
# iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
# iptables -A INPUT -s 5.6.7.8 -j ACCEPT
iptables: Invalid argument. Run `dmesg' for more information.
That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.
However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.
One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.
However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.
This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.
It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.
Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.
References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
[2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2
Reported-by: Rafael Buchbinder <rafi@rbk.ms>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:
After boot:
dstate: 0x01601200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 0
After offlining CPU 31 - 24
dstate: 0x01a31000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 24
pending: 0
Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.
Whats worse is that offlining CPU 25 again results in:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.
In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.
With that change applied onlining CPU 25 after offlining 31-24 results in:
dstate: 0x01600200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 25
pending:
And after offlining CPU 25:
dstate: 0x01a30000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 25
pending:
which is the correct and expected result.
Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
The effective affinity mask handling has no safety net when the mask is not
updated by the interrupt chip or the mask contains offline CPUs.
If that happens the CPU unplug code fails to migrate interrupts.
Add sanity checks and emit a warning when the mask contains only offline
CPUs.
Fixes: 415fcf1a22 ("genirq/cpuhotplug: Use effective affinity mask")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
Emit a one time warning when the effective affinity mask is enabled in
Kconfig, but the interrupt chip does not update the mask in its
irq_set_affinity() callback,
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
This patch makes the bpf_prog's name available
in kallsyms.
The new format is bpf_prog_tag[_name].
Sample kallsyms from running selftests/bpf/test_progs:
[root@arch-fb-vm1 ~]# egrep ' bpf_prog_[0-9a-fA-F]{16}' /proc/kallsyms
ffffffffa0048000 t bpf_prog_dabf0207d1992486_test_obj_id
ffffffffa0038000 t bpf_prog_a04f5eef06a7f555__123456789ABCDE
ffffffffa0050000 t bpf_prog_a04f5eef06a7f555
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During get_info_by_fd, the prog/map name is memcpy-ed. It depends
on the prog->aux->name and map->name to be zero initialized.
bpf_prog_aux is easy to guarantee that aux->name is zero init.
The name in bpf_map may be harder to be guaranteed in the future when
new map type is added.
Hence, this patch makes bpf_obj_name_cpy() to always zero init
the prog/map name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
while processing Rx = Ry instruction the verifier does
regs[insn->dst_reg] = regs[insn->src_reg]
which often clears write mark (when Ry doesn't have it)
that was just set by check_reg_arg(Rx) prior to the assignment.
That causes mark_reg_read() to keep marking Rx in this block as
REG_LIVE_READ (since the logic incorrectly misses that it's
screened by the write) and in many of its parents (until lucky
write into the same Rx or beginning of the program).
That causes is_state_visited() logic to miss many pruning opportunities.
Furthermore mark_reg_read() logic propagates the read mark
for BPF_REG_FP as well (though it's readonly) which causes
harmless but unnecssary work during is_state_visited().
Note that do_propagate_liveness() skips FP correctly,
so do the same in mark_reg_read() as well.
It saves 0.2 seconds for the test below
program before after
bpf_lb-DLB_L3.o 2604 2304
bpf_lb-DLB_L4.o 11159 3723
bpf_lb-DUNKNOWN.o 1116 1110
bpf_lxc-DDROP_ALL.o 34566 28004
bpf_lxc-DUNKNOWN.o 53267 39026
bpf_netdev.o 17843 16943
bpf_overlay.o 8672 7929
time ~11 sec ~4 sec
Fixes: dc503a8ad9 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds helper bpf_perf_prog_read_cvalue for perf event based bpf
programs, to read event counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
The typical use case for perf event based bpf program is to attach itself
to a single event. In such cases, if it is desirable to get scaling factor
between two bpf invocations, users can can save the time values in a map,
and use the value from the map and the current value to calculate
the scaling factor.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware pmu counters are limited resources. When there are more
pmu based perf events opened than available counters, kernel will
multiplex these events so each event gets certain percentage
(but not 100%) of the pmu time. In case that multiplexing happens,
the number of samples or counter value will not reflect the
case compared to no multiplexing. This makes comparison between
different runs difficult.
Typically, the number of samples or counter value should be
normalized before comparing to other experiments. The typical
normalization is done like:
normalized_num_samples = num_samples * time_enabled / time_running
normalized_counter_value = counter_value * time_enabled / time_running
where time_enabled is the time enabled for event and time_running is
the time running for event since last normalization.
This patch adds helper bpf_perf_event_read_value for kprobed based perf
event array map, to read perf counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
To achieve scaling factor between two bpf invocations, users
can can use cpu_id as the key (which is typical for perf array usage model)
to remember the previous value and do the calculation inside the
bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch does not impact existing functionalities.
It contains the changes in perf event area needed for
subsequent bpf_perf_event_read_value and
bpf_perf_prog_read_value helpers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the algorithm we're parallelizing is asynchronous we might change
CPUs between padata_do_parallel() and padata_do_serial(). However, we
don't expect this to happen as we need to enqueue the padata object into
the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel
queue.
Ensure we're not switching CPUs for a given padata object by tracking
the CPU within the padata object. If the serial callback gets called on
the wrong CPU, defer invoking padata_reorder() via a kernel worker on
the CPU we're expected to run on.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The reorder timer function runs on the CPU where the timer interrupt was
handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask
set.
Ensure the padata_reorder() callback runs on the correct CPU, which is
one in the 'pcpu' CPU mask set and, preferrably, the next expected one.
Do so by comparing the current CPU with the expected target CPU. If they
match, call padata_reorder() right away. If they differ, schedule a work
item on the target CPU that does the padata_reorder() call for us.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The parallel queue per-cpu data structure gets initialized only for CPUs
in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer
may run on a different CPU and might wrongly decide it's the target CPU
for the next reorder item as per-cpu memory gets memset(0) and we might
be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0.
Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index'
compare in padata_get_next() fail in this case by initializing the
cpu_index member of all per-cpu parallel queues. Use -1 for unused ones.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of adding irqsoff and preemptsoff enable and disable trace
events, move required functions and code to make it easier to add these events
in a later patch. This patch is just code movement and no functional change.
Link: http://lkml.kernel.org/r/20171006005432.14244-2-joelaf@google.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@android.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull watchddog clean-up and fixes from Thomas Gleixner:
"The watchdog (hard/softlockup detector) code is pretty much broken in
its current state. The patch series addresses this by removing all
duct tape and refactoring it into a workable state.
The reasons why I ask for inclusion that late in the cycle are:
1) The code causes lockdep splats vs. hotplug locking which get
reported over and over. Unfortunately there is no easy fix.
2) The risk of breakage is minimal because it's already broken
3) As 4.14 is a long term stable kernel, I prefer to have working
watchdog code in that and the lockdep issues resolved. I wouldn't
ask you to pull if 4.14 wouldn't be a LTS kernel or if the
solution would be easy to backport.
4) The series was around before the merge window opened, but then got
delayed due to the UP failure caused by the for_each_cpu()
surprise which we discussed recently.
Changes vs. V1:
- Addressed your review points
- Addressed the warning in the powerpc code which was discovered late
- Changed two function names which made sense up to a certain point
in the series. Now they match what they do in the end.
- Fixed a 'unused variable' warning, which got not detected by the
intel robot. I triggered it when trying all possible related config
combinations manually. Randconfig testing seems not random enough.
The changes have been tested by and reviewed by Don Zickus and tested
and acked by Micheal Ellerman for powerpc"
* 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
watchdog/core: Put softlockup_threads_initialized under ifdef guard
watchdog/core: Rename some softlockup_* functions
powerpc/watchdog: Make use of watchdog_nmi_probe()
watchdog/core, powerpc: Lock cpus across reconfiguration
watchdog/core, powerpc: Replace watchdog_nmi_reconfigure()
watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently"
watchdog/hardlockup/perf: Cure UP damage
watchdog/hardlockup: Clean up hotplug locking mess
watchdog/hardlockup/perf: Simplify deferred event destroy
watchdog/hardlockup/perf: Use new perf CPU enable mechanism
watchdog/hardlockup/perf: Implement CPU enable replacement
watchdog/hardlockup/perf: Implement init time detection of perf
watchdog/hardlockup/perf: Implement init time perf validation
watchdog/core: Get rid of the racy update loop
watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage
watchdog/sysctl: Clean up sysctl variable name space
watchdog/sysctl: Get rid of the #ifdeffery
watchdog/core: Clean up header mess
watchdog/core: Further simplify sysctl handling
watchdog/core: Get rid of the thread teardown/setup dance
...
If a module is loaded while tracing is enabled, then there's a possibility
that the module init functions were traced. These functions have their name
and address stored by ftrace such that it can translate the function address
that is written into the buffer into a human readable function name.
As userspace tools may be doing the same, they need a way to map function
names to their address as well. This is done through reading /proc/kallsyms.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This fixes a code ordering issue in the main suspend-to-idle loop
that causes some "low power S0 idle" conditions to be incorrectly
reported as unmet with suspend/resume debug messages enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6lm4
-----END PGP SIGNATURE-----
Merge tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes a code ordering issue in the main suspend-to-idle loop that
causes some "low power S0 idle" conditions to be incorrectly reported
as unmet with suspend/resume debug messages enabled"
* tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / s2idle: Invoke the ->wake() platform callback earlier
The ftrace_mod_map is a descriptor to save module init function names in
case they were traced, and the trace output needs to reference the function
name from the function address. But after the function is unloaded, it
the maps should be freed, as the rest of the function names are as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Allow for module init sections to be traced as well as core kernel init
sections. Now that filtering modules functions can be stored, for when they
are loaded, it makes sense to be able to trace them.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull networking fixes from David Miller:
1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
from Sara Sharon.
2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
Kasiviswanathan.
3) Fix session and tunnel release races in l2tp, from Guillaume Nault
and Sabrina Dubroca.
4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.
5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
cap check, invalid memory access in IPoIB support, etc.)
6) tun_get_user() should bail if skb->len is zero, from Alexander
Potapenko.
7) Fix RCU lookups in inetpeer, from Eric Dumazet.
8) Fix locking in packet_do_bund().
9) Handle cb->start() error properly in netlink dump code, from Jason
A. Donenfeld.
10) Handle multicast properly in UDP socket early demux code. From Paolo
Abeni.
11) Several erspan bug fixes in ip_gre, from Xin Long.
12) Fix use-after-free in socket filter code, in order to handle the
fact that listener lock is no longer taken during the three-way TCP
handshake. From Eric Dumazet.
13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.
14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: 8021q: skip packets if the vlan is down
bpf: fix bpf_tail_call() x64 JIT
net: stmmac: dwmac-rk: Add RK3128 GMAC support
rndis_host: support Novatel Verizon USB730L
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
mlxsw: spectrum_router: Track RIF of IPIP next hops
mlxsw: spectrum_router: Move VRF refcounting
net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
net: mvpp2: Fix clock resource by adding an optional bus clock
r8152: add Linksys USB3GIGV1 id
l2tp: fix l2tp_eth module loading
ip_gre: erspan device should keep dst
ip_gre: set tunnel hlen properly in erspan_tunnel_init
ip_gre: check packet length and mtu correctly in erspan_xmit
ip_gre: get key from session_id correctly in erspan_rcv
tipc: use only positive error codes in messages
ppp: fix __percpu annotation
udp: perform source validation for mcast early demux
IPv4: early demux can return an error code
...
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new from_timer() helper and passing
the timer pointer explicitly. Since this special timer is on the stack, it
needs to have a wrapper structure to carry state once .data is eliminated.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Michael Reed <mdr@sgi.com>
Cc: netdev@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-2-git-send-email-keescook@chromium.org
with addition of tnum logic the verifier got smart enough and
we can enforce return codes at program load time.
For now do so for cgroup-bpf program types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce BPF_PROG_QUERY command to retrieve a set of either
attached programs to given cgroup or a set of effective programs
that will execute for events within a cgroup
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
for cgroup bits
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple
bpf programs to a cgroup.
The difference between three possible flags for BPF_PROG_ATTACH command:
- NONE(default): No further bpf programs allowed in the subtree.
- BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
the program in this cgroup yields to sub-cgroup program.
- BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
that cgroup program gets run in addition to the program in this cgroup.
NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't
change their behavior. It only clarifies the semantics in relation
to new flag.
Only one program is allowed to be attached to a cgroup with
NONE or BPF_F_ALLOW_OVERRIDE flag.
Multiple programs are allowed to be attached to a cgroup with
BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
(those that were attached first, run first)
The programs of sub-cgroup are executed first, then programs of
this cgroup and then programs of parent cgroup.
All eligible programs are executed regardless of return code from
earlier programs.
To allow efficient execution of multiple programs attached to a cgroup
and to avoid penalizing cgroups without any programs attached
introduce 'struct bpf_prog_array' which is RCU protected array
of pointers to bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
for cgroup bits
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to be able to trace module init functions, the module code needs to
tell ftrace what is being freed when the init sections are freed. Use the
code that the main init calls to tell ftrace to free the main init sections.
This requires passing in a start and end address to free.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This tunable has been obsolete since 2.6.32, and writes to the
file have been failing and complaining in dmesg since then:
nr_pdflush_threads exported in /proc is scheduled for removal
That was 8 years ago. Remove the file ABI obsolete notice, and
the sysfs file.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
log2 as currently implemented applies only to u64 trace_event_field
derived fields, and assumes that anything it's applied to is a u64
field.
To prepare for synthetic fields like latencies, log2 should be
applicable to those as well, so take the opportunity now to fix the
current problems as well as expand to more general uses.
log2 should be thought of as a chaining function rather than a field
type. To enable this as well as possible future function
implementations, add a hist_field operand array into the hist_field
definition for this purpose, and make use of it to implement the log2
'function'.
Link: http://lkml.kernel.org/r/b47f93fc0b87b36eccf716b0c018f3a71e1f1111.1506105045.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
traceprobe_probes_write() and traceprobe_command() actually contain
nothing that ties them to kprobes - the code is generically useful for
similar types of parsing elsewhere, so separate it out and move it to
trace.c/trace.h.
Other than moving it, the only change is in naming:
traceprobe_probes_write() becomes trace_parse_run_command() and
traceprobe_command() becomes trace_run_command().
Link: http://lkml.kernel.org/r/ae5c26ea40c196a8986854d921eb6e713ede7e3f.1506105045.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There are a small number of 'generic fields' (comm/COMM/cpu/CPU) that
are found by trace_find_event_field() but are only meant for
filtering. Specifically, they unlike normal fields, they have a size
of 0 and thus wreak havoc when used as a histogram key.
Exclude these (return -EINVAL) when used as histogram keys.
Link: http://lkml.kernel.org/r/956154cbc3e8a4f0633d619b886c97f0f0edf7b4.1506105045.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge misc fixes from Andrew Morton:
"A lot of stuff, sorry about that. A week on a beach, then a bunch of
time catching up then more time letting it bake in -next. Shan't do
that again!"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (51 commits)
include/linux/fs.h: fix comment about struct address_space
checkpatch: fix ignoring cover-letter logic
m32r: fix build failure
lib/ratelimit.c: use deferred printk() version
kernel/params.c: improve STANDARD_PARAM_DEF readability
kernel/params.c: fix an overflow in param_attr_show
kernel/params.c: fix the maximum length in param_get_string
mm/memory_hotplug: define find_{smallest|biggest}_section_pfn as unsigned long
mm/memory_hotplug: change pfn_to_section_nr/section_nr_to_pfn macro to inline function
kernel/kcmp.c: drop branch leftover typo
memremap: add scheduling point to devm_memremap_pages
mm, page_alloc: add scheduling point to memmap_init_zone
mm, memory_hotplug: add scheduling point to __add_pages
lib/idr.c: fix comment for idr_replace()
mm: memcontrol: use vmalloc fallback for large kmem memcg arrays
kernel/sysctl.c: remove duplicate UINT_MAX check on do_proc_douintvec_conv()
include/linux/bitfield.h: remove 32bit from FIELD_GET comment block
lib/lz4: make arrays static const, reduces object code size
exec: binfmt_misc: kill the onstack iname[BINPRM_BUF_SIZE] array
exec: binfmt_misc: fix race between load_misc_binary() and kill_node()
...
The current method to prevent the ring buffer from entering into a recursize
loop is to use a bitmask and set the bit that maps to the current context
(normal, softirq, irq or NMI), and if that bit was already set, it is
considered a recursive loop.
New code is being added that may require the ring buffer to be entered a
second time in the current context. The recursive locking prevents that from
happening. Instead of mapping a bitmask to the current context, just allow 4
levels of nesting in the ring buffer. This matches the 4 context levels that
it can already nest. It is highly unlikely to have more than two levels,
thus it should be fine when we add the second entry into the ring buffer. If
that proves to be a problem, we can always up the number to 8.
An added benefit is that reading preempt_count() to get the current level
adds a very slight but noticeable overhead. This removes that need.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to make future changes where we need to call
tracing_set_clock() from within an event command, the order of
trace_types_lock and event_mutex must be reversed, as the event command
will hold event_mutex and the trace_types_lock is taken from within
tracing_set_clock().
Link: http://lkml.kernel.org/r/20170921162249.0dde3dca@gandalf.local.home
Requested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Integer ret is being assigned but never used and hence it is
redundant. Remove it, fixes clang warning:
trace_events_hist.c:1077:3: warning: Value stored to 'ret' is never read
Link: http://lkml.kernel.org/r/20170823112309.19383-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since commit 87d80de280 ("tracing: Remove
obsolete sched_switch tracer"), the sched_switch tracer selftest is no longer
used. This patch removes the same.
Link: http://lkml.kernel.org/r/20170909065517.22262-1-joelaf@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kernel-team@android.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- A memory fix with left over code from spliting out ftrace_ops
and function graph tracer, where the function graph tracer could
reset the trampoline pointer, leaving the old trampoline not to
be freed (memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to rebase
the branch to update the patch that added it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlnU++sUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcujzgf/ebIzGKe5vQKNrL4ITAcIz0T7Hvzl
pWw4uJp8kqO9x9EHMnztAkltQigvjvgDKZozJpUGgtNsFLuvdgQSBMK24YV8vLHs
UmXEnQ2tSB/2Sg2ccEnpjVXaMzL9aqlbeTmACbdd9UgZnvPiUYPejq2jFfECFQjb
k/gZT911ukBtx4mXYKzGFbTEZHdc/YUs6Y/wzB1ox5BBIUh71ZDZXxQTUHfXHlwS
Cst69/9dKl4nBEGDGas6/95iR+ORVv85osI/pqPtjSj4EkRnWfVRotaH1kNuSQil
gDIHSoy35NfXJx77/5IFHfrjFBAkr0IYRNL/jZaWazwM7rdqfAN8TwMQuA==
=4CtF
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixlets from Steven Rostedt:
"Two updates:
- A memory fix with left over code from spliting out ftrace_ops and
function graph tracer, where the function graph tracer could reset
the trampoline pointer, leaving the old trampoline not to be freed
(memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to
rebase the branch to update the patch that added it"
* tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()
ftrace: Fix kmemleak in unregister_ftrace_graph
The function names made sense up to the point where the watchdog
(re)configuration was unified to use softlockup_reconfigure_threads() for
all configuration purposes. But that includes scenarios which solely
configure the nmi watchdog.
Rename softlockup_reconfigure_threads() and softlockup_init_threads() so
the function names match the functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Don Zickus <dzickus@redhat.com>
The rework of the core hotplug code triggers the WARN_ON in start_wd_cpu()
on powerpc because it is called multiple times for the boot CPU.
The first call is via:
start_wd_on_cpu+0x80/0x2f0
watchdog_nmi_reconfigure+0x124/0x170
softlockup_reconfigure_threads+0x110/0x130
lockup_detector_init+0xbc/0xe0
kernel_init_freeable+0x18c/0x37c
kernel_init+0x2c/0x160
ret_from_kernel_thread+0x5c/0xbc
And then again via the CPU hotplug registration:
start_wd_on_cpu+0x80/0x2f0
cpuhp_invoke_callback+0x194/0x620
cpuhp_thread_fun+0x7c/0x1b0
smpboot_thread_fn+0x290/0x2a0
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0xbc
This can be avoided by setting up the cpu hotplug state with nocalls and
move the initialization to the watchdog_nmi_probe() function. That
initializes the hotplug callbacks without invoking the callback and the
following core initialization function then configures the watchdog for the
online CPUs (in this case CPU0) via softlockup_reconfigure_threads().
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Waiman Long