Two small bug fixes for the code you pulled for 4.3:
- Used a SHIFT define instead of a MASK define to check if a bit is turned on
when destroying hqd. Luckily, this is in gfx7 interface file with amdgpu,
which was used only for bring-up purposes of amdgpu, so no real effect on
a running system
- Used a logical AND instead of a bitwise AND operator, when initializing
sdma virtual memory when using SDMA queues
* tag 'drm-amdkfd-next-fixes-2015-08-05' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: fix bug when initializing sdma vm
drm/amdgpu: fix bug when amdkfd destroys hqd
The wrong define was used to check if the hqd is still active
v2: Don't use SHIFT as the MASK is already shifted
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the gfx8 interface file between amdgpu and amdkfd. This
interface file is currently in use when running on a Carrizo-based
system.
The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside amdgpu_device structure.
All the register accesses that amdkfd need are done using this
interface. This allows us to avoid direct register accesses in
amdkfd proper, while also allows us to avoid locking between
amdkfd and amdgpu.
The single exception is the doorbells that are used in both of
the drivers. However, because they are located in separate pci
bar pages, the danger of sharing registers between the drivers
is minimal.
Having said that, we are planning to move the doorbells as well
to amdgpu.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the gfx7 interface file between amdgpu and amdkfd. This
interface file mirrors (some) of the functions in radeon_kfd.c
(the interface file between radeon and amdkfd).
The gfx7 interface is used when it is run on a Kaveri-based system.
This interface file was used for bring-up of amdkfd on amdgpu and for
debugging purposes. For users who would like to run HSA on Kaveri, please
use the radeon graphic driver.
Note: CONFIG_DRM_AMDGPU_CIK must be selected for amdgpu to handle Kaveri.
v2: removed MTYPE_NONCACHED enum definition as it is defined in another
patch
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds an interface file between amdgpu and amdkfd. This
interface file is H/W agnostic, thus containing functions that
operate the same for any AMD APU/GPU H/W generation.
The functions in this interface mirror (some) of the functions in
radeon_kfd.c (the radeon<-->amdkfd interface file). The main functions
are:
- amdgpu_amdkfd_init - initialize the amdkfd module
- amdgpu_amdkfd_load_interface - load the H/W interface according to the
currently probed device
- amdgpu_amdkfd_device_probe - probe the device in amdkfd
- amdgpu_amdkfd_device_init - initialize the device in amdkfd
- amdgpu_amdkfd_interrupt - call the ISR of amdkfd
- amdgpu_amdkfd_suspend - suspend callback from amdgpu
- amdgpu_amdkfd_resume - resume callback from amdgpu
This patch also modifies the relevant amdgpu files, to use this new
interface.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.
v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
This is a translation of the patch ...
"drm/radeon: Handle irqs only based on irq ring, not irq status regs."
... for the vblank irq handling, to fix the same problem described
in that patch on the new driver.
Only compile tested due to lack of suitable hw.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
CC: Michel Dänzer <michel.daenzer@amd.com>
CC: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove unrelated whitespace change, fix C comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
And use common fence infrastructure for the wait.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
If the CONFIG_DEBUG_FS is not selected, compilation of the
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c provides two warnings that
amdgpu_debugfs_regs_init and amdgpu_debugfs_regs_cleanup are used but
never defined. And as result:
ERROR: "amdgpu_debugfs_regs_cleanup" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: "amdgpu_debugfs_regs_init" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
^
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplication across asic families and make it symmetric
with the freeing of the code in amdgpu_device.c
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree(NULL) is safe and this check is probably not required
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kzalloc rather than kcalloc(1.. for allocating
one thing.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to resolve compute hang at resume time.
v2: (agd5f) squash in second fix
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
We were doing it in the common code and in the IP specific code.
Remove the IP specific code. The common code handles the
ordering properly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_init allocates buffers and initializes them. It does not
touch the hw. There is no need to do it again on resume. It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.
Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie