Since the intel_engine_init_seqno() is shared by all engine submission
backends, move it out of the legacy intel_ringbuffer.c and
into the new home for common routines, intel_engine_cs.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-21-git-send-email-chris@chris-wilson.co.uk
Since the scratch allocation and cleanup is shared by all engine
submission backends, move it out of the legacy intel_ringbuffer.c and
into the new home for common routines, intel_engine_cs.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-20-git-send-email-chris@chris-wilson.co.uk
Use the GGTT VMA as the primary cookie for handing ring objects as
the most common action upon the ring is mapping and unmapping which act
upon the VMA itself. By restructuring the code to work with the ring
VMA, we can shrink the code and remove a few cycles from context pinning.
v2: Move the flush of the object back to before the first pin. We use
the am-I-bound? query to only have to check the flush on the first
bind and so avoid stalling on active rings.
Lots of little renames and small hoops.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-18-git-send-email-chris@chris-wilson.co.uk
Access through the GTT requires the device to be awake. Ideally
i915_vma_pin_iomap() is short-lived and the pinning demarcates the
access through the iomap. This is not entirely true, we have a mixture
of long lived pins that exceed the wakelock (such as legacy ringbuffers)
and short lived pin that do live within the wakelock (such as execlist
ringbuffers).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-17-git-send-email-chris@chris-wilson.co.uk
We know that the only access to the context object is via the GPU, and
the only time when it can be out of the GPU domain is when it is swapped
out and unbound. Therefore we only need to clflush the object when
binding, thus avoiding any potential stall on touching the domain on an
active context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-16-git-send-email-chris@chris-wilson.co.uk
When working with contexts, we most frequently want the GGTT VMA for the
context state, first and foremost. Since the object is available via the
VMA, we need only then store the VMA.
v2: Formatting tweaks to debugfs output, restored some comments removed
in the next patch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-15-git-send-email-chris@chris-wilson.co.uk
Since the guc allocates and pins and object into the GGTT for its usage,
it is more natural to use that pinned VMA as our resource cookie.
v2: Embrace naming tautology
v3: Rewrite comments for guc_allocate_vma()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-12-git-send-email-chris@chris-wilson.co.uk
The VMA are unreferenced, they belong to the object and live until they
are closed. However, if we want to use the VMA as a cookie and use it to
keep the object alive, we want to hold onto a reference to the object
for the lifetime of the VMA cookie. To facilitate this, add a couple of
simple wrappers for managing the reference count on the object owning the
VMA.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-11-git-send-email-chris@chris-wilson.co.uk
A simple little macro to clear a pointer and return the old value. This
is useful for writing
value = *ptr;
if (!value)
return;
*ptr = 0;
...
free(value);
in a slightly more concise form:
value = fetch_and_zero(ptr);
if (!value)
return;
...
free(value);
with the idea that this establishes a pattern that may be extended for
atomic use (using xchg or cmpxchg) i.e. atomic_fetch_and_zero() and
similar to llist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-10-git-send-email-chris@chris-wilson.co.uk
Previously, we would only set the vma->pages pointer for GGTT entries.
However, if we always set it, we can use it to prettify some code that
may want to access the backing store associated with the VMA (as
assigned to the VMA).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-8-git-send-email-chris@chris-wilson.co.uk
No longer is knowing how much of the GTT (both mappable aperture and
beyond) relevant, and the output clutters the real information - that is
how many objects are allocated and bound (and by who) so that we can
quickly grasp if there is a leak.
v2: Relent, and rename pinned to indicate display only. Since the
display objects are semi-static and are of variable size, they are the
interesting objects to watch over time for aperture leaking. The other
pins are either static (such as the scratch page) or very short lived
(such as execbuf) and not part of the precious GGTT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-6-git-send-email-chris@chris-wilson.co.uk
Only those objects pinned to the display have semi-permanent pins of a
global nature (other pins are transient within their local vm). Simplify
i915_gem_pinned to only show the pertinent information about the pinned
objects within the GGTT.
v2: i915_gem_gtt_info is still shared with debugfs/i915_gem_gtt,
rename i915_gem_pinned to i915_gem_pin_display to better reflect its
contents
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-5-git-send-email-chris@chris-wilson.co.uk
These two files (i915_gem_active, i915_gem_inactive) no longer give
pertinent information since active/inactive tracking is per-vm and so we
need the information per-vm. They are obsolete so remove them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-4-git-send-email-chris@chris-wilson.co.uk
With execlists, we have context objects everywhere, not just RCS. So
store them for post-mortem debugging. This also has a secondary effect
of removing one more unsafe list iteration with using preserved state
from the hanging request. And now we can cross-reference the request's
context state with that loaded by the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-3-git-send-email-chris@chris-wilson.co.uk
When capturing the error state, we do not need to know about every
address space - just those that are related to the error. We know which
context is active at the time, therefore we know which VM are implicated
in the error. We can then restrict the VM which we report to the
relevant subset.
v2: s/i/count_active/ (and similar)
Rewrite label generation for "Buffers"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-2-git-send-email-chris@chris-wilson.co.uk
Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
- refactor ddi buffer programming a bit (Ville)
- large-scale renaming to untangle naming in the gem code (Chris)
- rework vma/active tracking for accurately reaping idle mappings of shared
objects (Chris)
- misc dp sst/mst probing corner case fixes (Ville)
- tons of cleanup&tunings all around in gem
- lockless (rcu-protected) request lookup, plus use it everywhere for
non(b)locking waits (Chris)
- pipe crc debugfs fixes (Rodrigo)
- random fixes all over
* tag 'drm-intel-next-2016-08-08' of git://anongit.freedesktop.org/drm-intel: (222 commits)
drm/i915: Update DRIVER_DATE to 20160808
drm/i915: fix aliasing_ppgtt leak
drm/i915: Update comment before i915_spin_request
drm/i915: Use drm official vblank_no_hw_counter callback.
drm/i915: Fix copy_to_user usage for pipe_crc
Revert "drm/i915: Track active streams also for DP SST"
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Assert that the request hasn't been retired
drm/i915: Repack fence tiling mode and stride into a single integer
drm/i915: Document and reject invalid tiling modes
drm/i915: Remove locking for get_tiling
drm/i915: Remove pinned check from madvise ioctl
drm/i915: Reduce locking inside swfinish ioctl
drm/i915: Remove (struct_mutex) locking for busy-ioctl
drm/i915: Remove (struct_mutex) locking for wait-ioctl
drm/i915: Do a nonblocking wait first in pread/pwrite
drm/i915: Remove unused no-shrinker-steal
drm/i915: Tidy generation of the GTT mmap offset
drm/i915/shrinker: Wait before acquiring struct_mutex under oom
drm/i915: Simplify do_idling() (Ironlake vt-d w/a)
...
- more fence destaging and cleanup (Gustavo&Sumit)
- DRIVER_LEGACY to untangle from DRIVER_MODESET
- drm_mm refactor (Chris)
- fbdev-less compile fies
- clipped plane src/dst rects (Ville)
- + a few mediatek patches that build on top of that (Bibby+Daniel)
- small stuff all over really
* tag 'topic/drm-misc-2016-08-12' of git://anongit.freedesktop.org/drm-intel: (43 commits)
dma-buf/fence: kerneldoc: remove spurious section header
dma-buf/fence: kerneldoc: remove unused struct members
Revert "gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle"
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/radeon|amgpu: Make fbdev emulation optional
drm/vmwgfx: select CONFIG_FB
drm: Remove superflous linux/fb.h includes
drm/fb-helper: Add a dummy remove_conflicting_framebuffers
dma-buf/sync_file: only enable fence signalling on poll()
Documentation: add doc for sync_file_get_fence()
dma-buf/sync_file: add sync_file_get_fence()
dma-buf/sync_file: refactor fence storage in struct sync_file
dma-buf/fence-array: add fence_is_array()
drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg()
drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access()
drm: Add ratelimited versions of the DRM_DEBUG* macros
drm: Make sure drm_vblank_no_hw_counter isn't abused
drm/mediatek: Fix mtk_atomic_complete for runtime_pm
drm/mediatek: plane: Use FB's format's cpp to compute x offset
drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update
...
- add pixel clock and DE polarity configuration from device tree
using display timing bindings for parallel and LVDS output
- cleanup/remove trivial functions
- cleanup and fixes in preparation for capture support
- add atomic_mode_set helper and use it in imx-ldb - this is an
alternative to the encoder mode_set callback that passes the
crtc and connector state instead of just the mode. It allows
drivers to get information from the attached connector without
having to iterate over all connectors
- add drm_bridge support to imx-ldb, for bridges attached via LVDS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hj4e
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2016-08-12' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm updates and encoder atomic_mode_set helper callback
- add pixel clock and DE polarity configuration from device tree
using display timing bindings for parallel and LVDS output
- cleanup/remove trivial functions
- cleanup and fixes in preparation for capture support
- add atomic_mode_set helper and use it in imx-ldb - this is an
alternative to the encoder mode_set callback that passes the
crtc and connector state instead of just the mode. It allows
drivers to get information from the attached connector without
having to iterate over all connectors
- add drm_bridge support to imx-ldb, for bridges attached via LVDS
* tag 'imx-drm-next-2016-08-12' of git://git.pengutronix.de/git/pza/linux:
drm/imx-ldb: Add support to drm-bridge
drm/imx: imx-ldb: use encoder atomic_mode_set callback
drm/atomic-helper: Add atomic_mode_set helper callback
drm/imx: Remove imx_drm_handle_vblank()
gpu: ipu-v3: Add missing IDMAC channel names
gpu: ipu-v3: rename CSI client device
gpu: ipu-v3: Fix IRT usage
gpu: ipu-v3: Fix CSI data format for 16-bit media bus formats
gpu: ipu-v3: set correct full sensor frame for PAL/NTSC
gpu: ipu-v3: Add VDI input IDMAC channels
gpu: ipu-v3: Add ipu_get_num()
gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize()
gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset()
drm/imx: Remove imx_drm_crtc_id()
drm/imx: Remove imx_drm_crtc_vblank_get/_put()
drm/imx: convey the pixelclk-active and de-active flags from DT to the ipu-di driver
drm: add a helper function to extract 'de-active' and 'pixelclk-active' from DT
- add MAINTAINERS entry for mediatek-drm driver
- add support for AAL and GAMMA engines
- hook up gamma correction LUT
- add support for temporal dithering to OD and GAMMA engines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rl4u
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-2016-08-12' of git://git.pengutronix.de/git/pza/linux into drm-next
mediatek-drm maintainers and gamma correction
- add MAINTAINERS entry for mediatek-drm driver
- add support for AAL and GAMMA engines
- hook up gamma correction LUT
- add support for temporal dithering to OD and GAMMA engines
* tag 'mediatek-drm-next-2016-08-12' of git://git.pengutronix.de/git/pza/linux:
drm/mediatek: set mt8173 dithering function
drm/mediatek: Add gamma correction.
drm/mediatek: Add GAMMA engine basic function
drm/mediatek: Add AAL engine basic function
drm: mediatek: add Maintainers entry for Mediatek DRM drivers
Please pull tilcdc atomic modeset support and some non critical fixes.
* 'drm-next-tilcdc-atomic' of https://github.com/jsarha/linux: (29 commits)
drm/tilcdc: Change tilcdc_crtc_page_flip() to tilcdc_crtc_update_fb()
drm/tilcdc: Remove unnecessary pm_runtime_get() and *_put() calls
drm/tilcdc: Get rid of legacy dpms mechanism
drm/tilcdc: Use drm_atomic_helper_resume/suspend()
drm/tilcdc: Enable and disable interrupts in crtc start() and stop()
drm/tilcdc: tfp410: Add atomic modeset helpers to connector funcs
drm/tilcdc: tfp410: Set crtc panel info at init phase
drm/tilcdc: panel: Add atomic modeset helpers to connector funcs
drm/tilcdc: panel: Set crtc panel info at init phase
drm/tilcdc: Remove tilcdc_verify_fb()
drm/tilcdc: Remove obsolete crtc helper functions
drm/tilcdc: Set DRIVER_ATOMIC and use atomic crtc helpers
drm/tilcdc: Add drm_mode_config_reset() call to tilcdc_load()
drm/tilcdc: Add atomic mode config funcs
drm/tilcdc: Add tilcdc_crtc_atomic_check()
drm/tilcdc: Add tilcdc_crtc_mode_set_nofb()
drm/tilcdc: Initialize dummy primary plane from crtc init
drm/tilcdc: Add dummy primary plane implementation
drm/tilcdc: Make tilcdc_crtc_page_flip() work if crtc is not yet on
drm/tilcdc: Make tilcdc_crtc_page_flip() public
...
Closed vma are removed from the obj->vma_list so that they cannot be
found by userspace. However, this means that when forcibly unbinding an
object, we have to wait upon all rendering to that object first in order
for the closed, but active, vma to be reaped and their bindings removed.
Reported-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97343
Fixes: aa653a685d ("drm/i915: Be more careful when unbinding vma")
Fixes: 8a3b3d576c (" drm/i915: Convert non-blocking userptr waits...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471196681-30043-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
This patch provides the infrastructure for performing a 16-byte aligned
read from WC memory using non-temporal instructions introduced with sse4.1.
Using movntdqa we can bypass the CPU caches and read directly from memory
and ignoring the page attributes set on the CPU PTE i.e. negating the
impact of an otherwise UC access. Copying using movntdqa from WC is almost
as fast as reading from WB memory, modulo the possibility of both hitting
the CPU cache or leaving the data in the CPU cache for the next consumer.
(The CPU cache itself my be flushed for the region of the movntdqa and on
later access the movntdqa reads from a separate internal buffer for the
cacheline.) The write back to the memory is however cached.
This will be used in later patches to accelerate accessing WC memory.
v2: Report whether the accelerated copy is successful/possible.
v3: Function alignment override was only necessary when using the
function target("sse4.1") - which is not necessary for emitting movntdqa
from __asm__.
v4: Improve notes on CPU cache behaviour vs non-temporal stores.
v5: Fix byte offsets for unrolled moves.
v6: Find all remaining typos of "movntqda", use kernel_fpu_begin.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-2-git-send-email-chris@chris-wilson.co.uk
vmaps has a provision for controlling the page protection bits, with which
we can use to control the mapping type, e.g. WB, WC, UC or even WT.
To allow the caller to choose their mapping type, we add a parameter to
i915_gem_object_pin_map - but we still only allow one vmap to be cached
per object. If the object is currently not pinned, then we recreate the
previous vmap with the new access type, but if it was pinned we report an
error. This effectively limits the access via i915_gem_object_pin_map to a
single mapping type for the lifetime of the object. Not usually a problem,
but something to be aware of when setting up the object's vmap.
We will want to vary the access type to enable WC mappings of ringbuffer
and context objects on !llc platforms, as well as other objects where we
need coherent access to the GPU's pages without going through the GTT
v2: Remove the redundant braces around pin count check and fix the marker
in documentation (Chris)
v3:
- Add a new enum for the vmalloc mapping type & pass that as an argument to
i915_object_pin_map. (Tvrtko)
- Use PAGE_MASK to extract or filter the mapping type info and remove a
superfluous BUG_ON.(Tvrtko)
v4:
- Rename the enums and clean up the pin_map function. (Chris)
v5: Drop the VM_NO_GUARD, minor cosmetics.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-1-git-send-email-chris@chris-wilson.co.uk
This reverts
commit 2ab9f58791
Author: Peter Chen <peter.chen@nxp.com>
Date: Fri Jul 15 11:17:03 2016 +0800
gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle
The of_get_next_parent will drop refcount on the passed node, so the reverted
patch is wrong, thanks for Tomi Valkeinen points it.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470908694-16362-1-git-send-email-peter.chen@nxp.com
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
vmwgfx doesn't actually build without that.
It would be great if vmwgfx could switch over to the fbdev emulation
helpers, since those will take care of all this already. I guess one
reason to not do that was lack of defio support in the helpers, but
that's fixed now. If there's any other hold-up, we should figure out
what it is and whether it makes sense to address it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-4-git-send-email-daniel.vetter@ffwll.ch
Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.
Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.
v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
With NV12 we have two color planes to deal with so we must compute the
surface and x/y offsets for the second plane as well.
What makes this a bit nasty is that the hardware expects the surface
offset to be specified as a distance from the main surface offset.
What's worse, the distance must be non-negative (no neat wraparound or
anything). So we must make sure that the main surface offset is always
less or equal to the AUX surface offset. We do that by computing the AUX
offset first and the main surface offset second. If the main surface
offset ends up being above the AUX offset, we just push it down as far
as is required while still maintaining the required alignment etc.
Fortunately the AUX offset only reuqires 4K alignment, so we don't need
to do any of the backwards searching for an acceptable offset that we
must do for the main surface. And X tiled + NV12 isn't a supported
combination anyway.
Note that this just computes aux surface offsets, we do not yet program
them into the actual hardware registers, and hence we can't yet expose
NV12.
v2: Rebase due to drm_plane_state src/dst rects
s/TODO.../something else/ in the commit message/ (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SKL has nasty limitations with the display surface offsets:
* source x offset + width must be less than the stride for X tiled
surfaces or the display engine falls over
* the surface offset requires lots of alignment (256K or 1M)
These facts mean that we can't just pick any suitably aligned tile
boundary as the offset and expect the resulting x offset to be useable.
The solution is to start with the closest boundary as before, but then
keep searching backwards until we find one that works, or don't. This
means we must be prepared to fail, hence the whole surface offset
calculation needs to be moved to the .check_plane() hook from the
.update_plane() hook.
While at it we can check that the source width/height don't exceed
maximum plane size limits.
We'll store the results of the computation in the plane state to make
it easy for the .update_plane() hook to do its thing.
v2: Replace for+break loop with while loop
Rebase due to drm_plane_state src/dst rects
Rebase due to plane_check_state()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-11-git-send-email-ville.syrjala@linux.intel.com
To make life less surprising we can make intel_adjust_tile_offset()
deal with linear buffers as well. Currently it doesn't seem like there's
a real need for this since only X tiling and NV12 (which would always
be tiled currently) should need it. But I've used it for some debug
hacks already so seems like a reasonable thing to have.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-10-git-send-email-ville.syrjala@linux.intel.com
Minimize the resulting X coordinate after intel_adjust_tile_offset() is
done with it's offset adjustment. This allows calling
intel_adjust_tile_offset() multiple times in case we need to adjust
the offset several times.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-9-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If there's a fence on the object it will be aligned to the start
of the object, and hence CPU rendering to any fb that straddles
the fence edge will come out wrong due to lines wrapping at the
wrong place.
We have no API to manage fences on a sub-object level, so we can't
really fix this in any way. Additonally gen2/3 fences are rather
coarse grained so adjusting the offset migth not even be possible.
Avoid these problems by requiring the fb layout to agree with the
fence layout (if present).
v2: Rebase due to i915_gem_object_get_tiling() & co.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-8-git-send-email-ville.syrjala@linux.intel.com
Currently we require the object to be X tiled if the fb is X
tiled. The argument is supposedly FBC GTT tracking. But
actually that no longer holds water since FBC supports
Y tiling as well on SKL+.
A better rule IMO is to require that if there is a fence, the
fb modifier match the object tiling mode. But if the object is linear,
we can allow the fb modifier to be anything. The idea being that
if the user set the tiling mode on the object, presumably the intention
is to actually use the fence for CPU access. But if the tiling mode is
not set, the user has no intention of using a fence (and can't actually
since we disallow tiling mode changes when there are framebuffers
associated with the object).
On gen2/3 we must keep to the rule that the object and fb
must be either both linear or both X tiled. No mixing allowed
since the display engine itself will use the fence if it's present.
v2: Fix typos
v3: Rebase due to i915_gem_object_get_tiling() & co.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Soon the fence tiling mode may not always match the fb modifier
even for X tiled buffers. So let's use the fb modifier
consistently for all display tiling decisions.
v2: Rebased due to s/ring/engine/
v3: Rebased due to s/engine/ring/ O_o
v4: Rebase due to i915_gem_object_get_tiling() & co.
Reviewed-by: Matthew Auld <matthew.auld@intel.com> (v1)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-6-git-send-email-ville.syrjala@linux.intel.com
intel_compute_tile_offset() and intel_add_fb_offsets() get passed the fb
and the rotation. As both of those come from the plane state we can just
pass that in instead.
For extra consitency pass the plane state to intel_fb_xy_to_linear() as
well even though it only really needs the fb.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-5-git-send-email-ville.syrjala@linux.intel.com
We repeat the SKL stride register value calculations a several places.
Move it into a small helper function.
v2: Rebase due to drm_plane_state src/dst rects
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-4-git-send-email-ville.syrjala@linux.intel.com
intel_compute_page_offset() can dig up the correct pitch from the fb
itself, no need for the caller to pass it in.
A bit of extra care is needed for the lower level
_intel_compute_page_offset() since that one gets called before the
rotated pitch under intel_fb is populated. Note that we don't actually
call it with anything but DRM_ROTATE_0 there so we wouldn't actually
look up the rotated pitch there, but still, leave the pitch as something
the caller has to pass to _intel_compute_page_offset() as an
indicator that something is a bit special.
This leaves 'stride_div' in the skl plane update hooks as a mostly useless
variable so just get rid of it.
v2: Add a note why stride_div got nuked
v3: Extract intel_fb_pitch() since it can be useful later
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-3-git-send-email-ville.syrjala@linux.intel.com
Redo the fb rotation handling in order to:
- eliminate the NV12 special casing
- handle fb->offsets[] properly
- make the rotation handling easier for the plane code
To achieve these goals we reduce intel_rotation_info to only contain
(for each plane) the rotated view width,height,stride in tile units,
and the page offset into the object where the plane starts. Each plane
is handled exactly the same way, no special casing for NV12 or other
formats. We then store the computed rotation_info under
intel_framebuffer so that we don't have to recompute it again.
To handle fb->offsets[] we treat them as a linear offsets and convert
them to x/y offsets from the start of the relevant GTT mapping (either
normal or rotated). We store the x/y offsets under intel_framebuffer,
and for some extra convenience we also store the rotated pitch (ie.
tile aligned plane height). So for each plane we have the normal
x/y offsets, rotated x/y offsets, and the rotated pitch. The normal
pitch is available already in fb->pitches[].
While we're gathering up all that extra information, we can also easily
compute the storage requirements for the framebuffer, so that we can
check that the object is big enough to hold it.
When it comes time to deal with the plane source coordinates, we first
rotate the clipped src coordinates to match the relevant GTT view
orientation, then add to them the fb x/y offsets. Next we compute
the aligned surface page offset, and as a result we're left with some
residual x/y offsets. Finally, if required by the hardware, we convert
the remaining x/y offsets into a linear offset.
For gen2/3 we simply skip computing the final page offset, and just
convert the src+fb x/y offsets directly into a linear offset since
that's what the hardware wants.
After this all platforms, incluing SKL+, compute these things in exactly
the same way (excluding alignemnt differences).
v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating
plane src coordinates
Drop some spurious changes that got left behind during
development
v3: Split out more changes to prep patches (Daniel)
s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity
Rename intel_surf_gtt_offset to intel_fb_gtt_offset
Kill the pointless 'plane' parameter from intel_fb_gtt_offset()
v4: Fix alignment vs. alignment-1 when calling
_intel_compute_tile_offset() from intel_fill_fb_info()
Pass the pitch in tiles in
stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info()
Pass the full width/height of the rotated area to
drm_rect_rotate() for clarity
Use u32 for more offsets
v5: Preserve the upper_32_bits()/lower_32_bits() handling for the
fb ggtt offset (Sivakumar)
v6: Rebase due to drm_plane_state src/dst rects
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looks like the TSEG lives just above TOUD, stolen comes after TSEG.
The spec seems somewhat self-contradictory in places, in the ESMRAMC
register desctription it says:
TSEG Size:
10=(TOUD + 512 KB) to TOUD
11 =(TOUD + 1 MB) to TOUD
so that agrees with TSEG being at TOUD. But the example given
elsehwere in the spec says:
TOUD equals 62.5 MB = 03E7FFFFh
TSEG selected as 512 KB in size,
Graphics local memory selected as 1 MB in size
General System RAM available in system = 62.5 MB
General system RAM range00000000h to 03E7FFFFh
TSEG address range03F80000h to 03FFFFFFh
TSEG pre-allocated from03F80000h to 03FFFFFFh
Graphics local memory pre-allocated from03E80000h to 03F7FFFFh
so here we have TSEG above stolen.
Real world evidence agrees with the TOUD->TSEG->stolen order however, so
let's fix up the code to account for the TSEG size.
Cc: Taketo Kabe <fdporg@vega.pgw.jp>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Fixes: 0ad98c74e0 ("drm/i915: Determine the stolen memory base address on gen2")
Fixes: a4dff76924 ("x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms")
Reported-by: Taketo Kabe <fdporg@vega.pgw.jp>
Tested-by: Taketo Kabe <fdporg@vega.pgw.jp>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96473
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470653919-27251-1-git-send-email-ville.syrjala@linux.intel.com
Link: http://download.intel.com/design/chipsets/datashts/25251405.pdf
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Currently to change the firmware one has to update the exported
module firmware string and the major-minor versions used for
verification after load. Consolidate that to a single place
defining correct major and minor versions per platform.
v2: Rebased for KBL.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Peter Antoine <peter.antoine@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470842206-35685-1-git-send-email-tvrtko.ursulin@linux.intel.com
Until now code was calling hweight32 to figure out the
number from device_info->ring_mask at runtime. Instead
we can cache it at engine init time and use directly.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1470842530-35854-1-git-send-email-tvrtko.ursulin@linux.intel.com
Add support to attach a drm_bridge to imx-ldb in addition to
existing support to attach a LVDS panel.
This patch does a simple code refactoring by moving code
from for_each_child_of_node iterator to a new function named
imx_ldb_panel_ddc(). This was necessary to allow the panel ddc
code to run only when the imx_ldb is not attached to a bridge.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Some panels only accept bpc (bit per color) 6-bit.
But, the default bpc in mt8173 display data path is 8-bit.
If we didn't enable dithering function to convert bpc,
display cannot show the smooth grayscale image.
In mt8173, the dithering function in OD (OverDrive) and
GAMMA module, we have to config them with
connector->display_mode.bpc when CRTC initial.
1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add gamma set function to correct brightness values.
It applies arbitrary mapping curve to compensate the
incorrect transfer function of the panel.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to correct brightness values, we have
to support gamma funciton on MT8173. In MT8173,
we have two engines for supporting gamma function:
AAL and GAMMA. This patch add some GAMMA engine
basic function, include config, start and stop
function.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to correct brightness values, we have
to support gamma funciton on MT8173. In MT8173,
we have two engines for supporting gamma function:
AAL and GAMMA. This patch add some AAL engine
basic function, include config, start and stop
function.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
request->batch_obj is only set by execbuffer for the convenience of
debugging hangs. By moving that operation to the callsite, we can
simplify all other callers and future patches. We also move the
complications of reference handling of the request->batch_obj next to
where the active tracking is set up for the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470832906-13972-2-git-send-email-chris@chris-wilson.co.uk
We allocate a few objects into the GGTT that we never need to access via
the mappable aperture (such as contexts, status pages). We can request
that these are bound high in the VM to increase the amount of mappable
aperture available. However, anything that may be frequently pinned
(such as logical contexts) we want to use the fast search & insert.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470832906-13972-1-git-send-email-chris@chris-wilson.co.uk
During intel_gt_powersave_init() we take the RPS mutex to ensure that
all locking requirements are met as we talk to the punit, but we also
require the struct_mutex for allocating a slice of the global GTT for a
power context on Valleyview. struct_mutex must be the outer lock here,
as we nest rps.mutex inside later on.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 773ea9a801 ("drm/i915: Perform static RPS frequency setup before...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470833904-29886-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
In the preceding patches we made sure that:
- the LVDS encoder takes care of reiniting both the LVDS register
and its PPS
- the eDP encoder takes care of reiniting its PPS
- the PPS register unlocking workaround is applied explicitly whenever
the PPS context is lost
Based on the above we can safely remove the opaque LVDS and PPS save /
restore from generic code.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-6-git-send-email-imre.deak@intel.com
Atm, we apply this workaround somewhat inconsistently at the following
points: driver loading, LVDS init, eDP PPS init, system resume. As this
workaround also affects registers other than PPS (timing, PLL) a more
consistent way is to apply it early after the PPS HW context is known to
be lost: driver loading, system resume and on VLV/CHV/BXT when turning
on power domains.
This is needed by the next patch that removes saving/restoring of the
PP_CONTROL register.
This also removes the incorrect programming of the workaround on HSW+
PCH platforms which don't have the register locking mechanism.
v2: (Ville)
- Don't apply the workaround on BXT.
- Simplify platform checks using HAS_DDI().
v3:
- Move the call of intel_pps_unlock_regs_wa() to the more
logical vlv_display_power_well_init() (also fixing CHV) (Ville).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-5-git-send-email-imre.deak@intel.com
Similarly to the previous patch, initialize the PPS from the DP
encoder's resume hook. Note that as opposed to LVDS we can't do this
during encoder enabling, since we need the PPS for DP detection as well.
The PPS init code is now the same for init and resume, so factor out a
new intel_dp_pps_init() helper for this.
v2:
- Factor out intel_dp_pps_init() (Ville).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-4-git-send-email-imre.deak@intel.com
Atm the LVDS encoder depends on the PPS HW context being saved/restored
from generic suspend/resume code. Since the PPS is specific to the LVDS
and eDP encoders a cleaner way is to reinitialize it during encoder
enabling, so do this here for LVDS. Follow-up patches will init the PPS
for the eDP encoder similarly and remove the suspend/resume time save /
restore.
v2:
- Apply BSpec +1 offset and use DIV_ROUND_UP() when programming the
power cycle delay. (Ville)
v3: (Ville)
- Fix +1 vs. round-up order.
- s/reset_on_powerdown/powerdown_on_reset/
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-3-git-send-email-imre.deak@intel.com
The PPS registers are pretty much the same everywhere, the differences
being:
- Register fields appearing, disappearing from one platform to the
next: panel-reset-on-powerdown, backlight-on, panel-port,
register-unlock
- Different register base addresses
- Different number of PPS instances: 2 on VLV/CHV/BXT, 1 everywhere
else.
We can merge the separate set of PPS definitions by extending the PPS
instance argument to all platforms and using instance 0 on platforms
with a single instance. This means we'll need to calculate the register
addresses dynamically based on the given platform and PPS instance.
v2:
- Simplify if ladder in intel_pps_get_registers(). (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-1-git-send-email-imre.deak@intel.com
As we're tweaking the GuC-related code in debugfs, we can
drop the no-longer-used 'q_fail' and repack the structure.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Now that host structures are indexed by host engine-id rather than
guc_id, we can usefully convert some for_each_engine() loops to use
for_each_engine_id() and avoid multiple dereferences of engine->id.
Also a few related tweaks to cache structure members locally wherever
they're used more than once or twice, hopefully eliminating memory
references.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The Context Descriptor passed by the kernel to the GuC contains a field
specifying which engine(s) the context will use. Historically, this was
always set to "all of them", but if we had a separate client for each
engine, we could be more precise, and set only the bit for the engine
that the client was associated with. So this patch enables this usage,
in preparation for having multiple clients, though at this point there
is still only a single client used for all supported engines.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We have essentially the same code in each of two different
loops, so we can refactor it into a little helper function.
This also reduces the amount of work done during startup,
as we now only reprogram h/w found to be in a state other
than that expected, and so avoid the overhead of setting
doorbell registers to the state they're already in.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
guc_init_doorbell_hw() borrows the (currently single) GuC client to use
in reinitialising ALL the doorbell registers (as the hardware doesn't
reset them when the GuC is reset). As a prerequisite for accommodating
multiple clients, it should only reset doorbells that are supposed to be
disabled, avoiding those that are marked as in use by any client.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The bottom-half we use for processing the breadcrumb interrupt is a
task, which is an RCU protected struct. When accessing this struct, we
need to be holding the RCU read lock to prevent it disappearing beneath
us. We can use the RCU annotation to mark our irq_seqno_bh pointer as
being under RCU guard and then use the RCU accessors to both provide
correct ordering of access through the pointer.
Most notably, this fixes the access from hard irq context to use the RCU
read lock, which both Daniel and Tvrtko complained about.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470761272-1245-3-git-send-email-chris@chris-wilson.co.uk
In commit 2529d57050 ("drm/i915: Drop racy markup of missed-irqs from
idle-worker") the racy detection of missed interrupts was removed when
we went idle. This however opened up the issue that the stuck waiters
were not being reported, causing a test case failure. If we move the
stuck waiter detection out of hangcheck and into the breadcrumb
mechanims (i.e. the waiter) itself, we can avoid this issue entirely.
This leaves hangcheck looking for a stuck GPU (inspecting for request
advancement and HEAD motion), and breadcrumbs looking for a stuck
waiter - hopefully make both easier to understand by their segregation.
v2: Reduce the error message as we now run independently of hangcheck,
and the hanging batch used by igt also counts as a stuck waiter causing
extra warnings in dmesg.
v3: Move the breadcrumb's hangcheck kickstart to the first missed wait.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97104
Fixes: 2529d57050 (waiter"drm/i915: Drop racy markup of missed-irqs...")
Testcase: igt/drv_missed_irq
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470761272-1245-2-git-send-email-chris@chris-wilson.co.uk
One of the few guarantees we want the busy ioctl to provide is that the
reported busy writer is included in the set of busy read engines. This
should be provided by the ordering of setting and retiring the active
trackers, but we can do better by explicitly setting the busy read
engine flag for the last writer.
v2: More comments inside __busy_write_id() to explain why both fields
are set.
Fixes: 3fdc13c7a3 ("drm/i915: Remove (struct_mutex) locking for busy-ioctl")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470762505-12799-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Timeouts can be errors, but timeouts are also usually normal behavior
and happen a lot. Since the kernel already lets us know when we're
suppressing messages due to rate limiting, rate limit timeout errors so
we don't make too much noise in the kernel log.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-8-git-send-email-cpaul@redhat.com
Since we always retry in drm_dp_dpcd_access() regardless of the error,
we're going to make a lot of noise if the aux->transfer function prints
it's own errors (as is the case with radeon). If we can print the error
code here, this reduces the need for drivers to do this. So instead of
having to print "dp_aux_ch timed out" over 32 times we can just print
once.
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-2-git-send-email-cpaul@redhat.com
I mistyped and added an extra _request_ to __i915_gem_active_get_rcu()
Also, the same happened to another comment for i915_gem_active_get_rcu()
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470758602-1338-1-git-send-email-chris@chris-wilson.co.uk
cirrus_modeset_init() is initializing/registering the emulated fbdev
and, since commit c61b93fe51 ("drm/atomic: Fix remaining places where
!funcs->best_encoder is valid"), DRM internals can access/test some of
the fields in mode_config->funcs as part of the fbdev registration
process.
Make sure dev->mode_config.funcs is properly set to avoid dereferencing
a NULL pointer.
Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: c61b93fe51 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid")
Signed-off-by: Dave Airlie <airlied@redhat.com>
According to E-EDID spec 1.3, table 3.9, a digital video sink with the
"DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x
TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned".
For such displays, the DFP spec 1.0, section 3.10 "EDID support" says:
"If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.)
without extensions, the host will make the following assumptions:
1. 24-bit MSB-aligned RGB TFT
2. DE polarity is active high
3. H and V syncs are active high
4. Established CRT timings will be used
5. Dithering will not be enabled on the host"
So if we don't know the bit depth of the display from additional
colorimetry info we should assume 8 bpc / 24 bpp by default.
This patch adds info->bpc = 8 assignement for that case.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 013dd9e038
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown")
This commit introduced a regression into stable kernels,
as it reduces output color depth to 6 bpc for any video
sink connected to a Displayport connector if that sink
doesn't report a specific color depth via EDID, or if
our EDID parser doesn't actually recognize the proper
bpc from EDID.
Affected are active DisplayPort->VGA converters and
active DisplayPort->DVI converters. Both should be
able to handle 8 bpc, but are degraded to 6 bpc with
this patch.
The reverted commit was meant to fix
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331
A followup patch implements a fix for that specific bug,
which is caused by a faulty EDID of the affected DP panel
by adding a new EDID quirk for that panel.
DP 18 bpp fallback handling and other improvements to
DP sink bpc detection will be handled for future
kernels in a separate series of patches.
Please backport to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331
reports that the "AEO model 0" display is driven with 8 bpc
without dithering by default, which looks bad because that
panel is apparently a 6 bpc DP panel with faulty EDID.
A fix for this was made by commit 013dd9e038
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown").
That commit triggers new regressions in precision for DP->DVI and
DP->VGA displays. A patch is out to revert that commit, but it will
revert video output for the AEO model 0 panel to 8 bpc without
dithering.
The EDID 1.3 of that panel, as decoded from the xrandr output
attached to that bugzilla bug report, is somewhat faulty, and beyond
other problems also sets the "DFP 1.x compliant TMDS" bit, which
according to DFP spec means to drive the panel with 8 bpc and
no dithering in absence of other colorimetry information.
Try to make the original bug reporter happy despite the
faulty EDID by adding a quirk to mark that panel as 6 bpc,
so 6 bpc output with dithering creates a nice picture.
Tested by injecting the edid from the fdo bug into a DP connector
via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering
is selected.
This patch should be backported to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Change tilcdc_crtc_page_flip() to tilcdc_crtc_update_fb(). The
function is not used as a page_flip() callback anymore so it is only
confusing to call it that. The function should only be used by dummy
primary plane commit() callback.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Remove unnecessary pm_runtime_get() and *_put() calls from commit
phase callbacks. Those calls are not needed since we have the whole
commit phase between pm_runtime_get_sync() and pm_runtime_put_sync().
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Get rid of legacy dpms mechanism. This simplifies the code quite a
bit. The old start() and stop() functions become tilcdc_crtc_enable()
and *_disable(). The functions are added with all the necessary
mechanisms from the old dpms function and they are used directly as
the crtc helper enable() and disable() callbacks.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Use drm_atomic_helper_resume/suspend() and get rid off all the obsolete
register level context restoring code.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Enable and disable interrupts in crtc start() and stop(). None of the
interrupts can fire if CRTC is disabled, so it is cleaner - when
considering suspend/resume code etc. - to enable the interrupts when
CRTC is turned on and to disable them when CRTC is turned off.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add atomic modeset helpers to tfp410 connector funcs. Property handling
related helpers, atomic reset helper, and new dpms helper is needed in
connector for atomic modeseting to work. The default helper functions
are enough.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Set crtc panel info at init phase. Setting it at prepare callback does
it multiple times for no good reason and it is also too late when atomic
modeset is used.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add atomic modeset helpers to panel connector funcs. Property handling
related helpers, atomic reset helper, and new dpms helper is needed in
connector for atomic modeseting to work. The default helper functions
are enough.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Set crtc panel info at init phase. Setting it at prepare callback does
it multiple times for no good reason and it is also too late when atomic
modeset is used.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Remove tilcdc_verify_fb(). The tilcdc_verify_fb() function is not
needed because the same checks are implemented in
tilcdc_plane_atomic_check().
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Remove obsolete crtc helper functions. These are not needed when
atomic modeset is used.
Note that the drm_crtc_helper_funcs mode_fixup() is still needed. The
crtc's check() callback can not do its job here.
The plane's check() callback needs to set drm_crtc_state's
->mode_changed to true if the pixel format for the framebuffer
changes. Because of this drm_mode_config_funcs atomic_check() callback
needs to call drm_atomic_helper_check_modeset() once more after it has
called drm_atomic_helper_check_planes(). If the fixing of the
adjusted_mode would be done in drm_crtc_helper_funcs atomic_check()
callback, it would get over written by the extra
drm_atomic_helper_check_modeset() call.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Set DRIVER_ATOMIC and use atomic helpers and rename commit and prepare
crtc helpers to enable and disable. This makes the final jump to mode
setting, but there is lot of obsolete code to clean up.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add drm_mode_config_reset() call to tilcdc_load(). This is need to
initialize atomic state variables at load time.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add atomic mode config funcs. The atomic_commit implementation is a
copy-paste from drm_atomic_helper_commit(), leaving out the async
test. The similar copy-paste implementation appears to be used in many
other drivers too. The standard drm_atomic_helper_check() is used for
checking.
The drm_atomic_helper_check() can not be used in drm_mode_config_funcs
atomic_check() callback because the plane's check implementation may
update crtc state's ->mode_changed flag. Because of this the
drm_atomic_helper_check_modeset() has to be called once more after
drm_atomic_helper_check_planes() (see drm_atomic_helper_check_modeset()
documentation).
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add tilcdc_crtc_atomic_check(). Checks the display mode validity and
the presence of the mandatory primary plane.
The drm_crtc_helper_funcs mode_fixup() callback is left untouched and
the check function does no try to do its job on purpose, despite what
the mode_fixup() callback's documentations suggests.
The plane's check() callback needs to set drm_crtc_state's
->mode_changed to true if the pixel format for the framebuffer
changes. Because of this drm_mode_config_funcs atomic_check() callback
needs to call drm_atomic_helper_check_modeset() once more after it has
called drm_atomic_helper_check_planes(). If the fixing of the
adjusted_mode would be done in drm_crtc_helper_funcs atomic_check()
callback, it would get over written by the extra
drm_atomic_helper_check_modeset() call.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add tilcdc_crtc_mode_set_nofb(). The mode_set_nofb() semantics do not
fit well to LCDC, because of the mandatory framebuffer. However, when
the primary plane is required in the check phase, it and the
framebuffer can be found from the atomic state struct.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add dummy primary plane implementation. LCDC does not really have
planes, only simple framebuffer that is mandatory. This primary plane
implementation has the necessary checks for implementing simple
framebuffer trough DRM plane abstraction. For setting the actual
framebuffer the implementation relies on a CRTC side function.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Make tilcdc_crtc_page_flip() work if crtc is not yet on. The plane
commit sometimes comes before crtc is turned on. The new framebuffer
should be set to scanout also in that case, so that it is there when
crtc is turned on at the end of the commit phase.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Fix tilcdc component master unloading. If a subcomponent module
(tda998x in this case) is unloaded before its master (tilcdc in this
case), it calls drm_put_dev() and it should not be called again by
the master when its module is unloaded. However component_master_del()
must still be called and the check if the drm_put_dev() has been
called must be in component_master_ops unbind() callback, not in
platform_driver remove() callback.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Add drm_crtc_vblank_on() and *_off() calls to start() and stop()
functions, to make sure any vblank waits etc. gets properly cleaned
up.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Increase time out for waiting frame done interrupt. 50ms is long
enough for the usual display modes (50 Hz or higher refresh rate), but
it may be a bit tight for some unusual mode.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Move wait queue waiting of LCDC_FRAME_DONE IRQ from tilcdc_crtc_dpms()
into stop() function. This is just a cleanup and enables independent
use of stop() function.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reorder the IRQ function so that the write to LCDC_END_OF_INT_IND_REG
is done last. The write to LCDC_END_OF_INT_IND_REG indicates to LCDC
that the interrupt service routine has completed (see section
13.3.6.1.6 in AM335x TRM). This is needed if LCDC's ipgvmodirq module
is configured for pulse interrupts.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Move LCDC_SYNC_LOST handling inside if (ver == 2) statement.
LCDC_SYNC_LOST interrupt status bit is only defined for version 2
silicon.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Restore old dpms state in pm_resume(). The dpms is turned off in
pm_suspend() and it should be restored to its original state in
pm_resume(). Without this patch the display is left blanked after a
suspend/resume cycle.
Fixes commit 614b3cfeb8 ("drm/tilcdc: disable the lcd controller/dma
engine when suspend invoked")
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Shouldn't be possible since everyone kzallocs this, but better safe
than sorry. Random drive-by-idea really.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rdorigo.vivi@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470673493-14304-1-git-send-email-daniel.vetter@ffwll.ch
To properly implement atomic w/ runtime pm, we move
drm_atomic_helper_commit_modeset_enables() above
drm_atomic_helper_commit_planes() to ensure CRTCs are enabled before
modifying plane registers, and set active_only to true to filter out
plane update notifications when the CRTC is disabled.
According to the document from linux kernel:
Set the active_only parameters to true in order not to receive plane
update notifications related to a disabled CRTC. This avoids the need
to manually ignore plane updates in driver code when the driver and/or
hardware can't or just don't need to deal with updates on disabled
CRTCs, for example when supporting runtime PM.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-8-git-send-email-bibby.hsieh@mediatek.com
The mtk_plane_enable is just called once by mtk_plane_atomic_update.
So, merge mtk_plane_enable into mtk_plane_atomic_update.
While we are here, also clean up the function a bit by using an fb local
variables.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-6-git-send-email-bibby.hsieh@mediatek.com
It is not actually useful to a mtk plane to know its zpos/index, so just
remove this field.
This let's completely remove struct mtk_drm_plane in a follow up patch.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-3-git-send-email-bibby.hsieh@mediatek.com
Replace the use of drm_plane_helper_check_update() with
drm_plane_helper_check_state() since we have a plane state.
I don't see any actual users of drm_simple_kms_helper yet, so
no actual plane clipping bugs to fix.
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-10-git-send-email-ville.syrjala@linux.intel.com
Replace the use of drm_plane_helper_check_update() with
drm_plane_helper_check_state() since we have a plane state.
This also eliminates the double clipping the driver was doing
in both check and commit phases). And it should fix src coordinate
addr adjustement. Previously the driver was expecting negative dst
coordinates after clipping, which is not going happen, so any clipping
induced addr adjustment simply didn't happen. Neither did the driver
respect any user configured src coordinates, so panning and such would
have been totally broken. It should be all good now.
Cc: CK Hu <ck.hu@mediatek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Tested-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-9-git-send-email-ville.syrjala@linux.intel.com
Replace the use of drm_plane_helper_check_update() with
drm_plane_helper_check_state() since we have a plane state.
Rockchip looks to handling plane clipping rather well already
(unlikje most arm drm drivers) so there are no function changes
here.
Cc: Yao <mark.yao@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-8-git-send-email-ville.syrjala@linux.intel.com
Add a version of drm_plane_helper_check_update() which takes a plane
state instead of having the caller pass in everything.
And to reduce code duplication, let's reimplement
drm_plane_helper_check_update() in terms of the new function, by
having a tempororary plane state on the stack.
v2: Add a note that the functions modifies the state (Chris)
v3: Fix drm_plane_helper_check_update() y coordinates (Daniel Kurtz)
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org> (v2)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1470642910-14073-1-git-send-email-ville.syrjala@linux.intel.com
Using atomic_mode_set instead of mode_set allows to access crtc
and connector states in addition to the modes. This allows to
remove the connector list walk.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Some encoders need more information from crtc and connector state or
connector display info than just the mode during mode setting. This
patch adds an atomic encoder mode setting variant that passes the crtc
state (which contains the modes) and the connector state.
atomic_enable/disable variants that additionally pass crtc and connector
state don't seem to be necessary for any current driver. mode_fixup
already has an atomic equivalent in atomic_check.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
imx_drm_handle_vblank() is just a simple wrapper of drm_crtc_handle_vblank()
without doing any thing fancy - drm_crtc_handle_vblank() can be called
directly. So, let's remove the wrapper.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rename the CSI client device in the client_reg[] table to
"imx-ipuv3-csi".
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There can be multiple IC tasks using the IRT, so the IRT needs
a separate use counter. Create a private ipu_irt_enable() to
enable the IRT module when any IC task requires rotation, and
ipu_irt_disable() when a task no longer needs the IRT.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The CSI data format was being programmed incorrectly for the
1x16 media bus formats. The CSI data format for 16-bit must
be bayer/generic (CSI_SENS_CONF_DATA_FMT_BAYER).
Suggested-by: Carsten Resch <Carsten.Resch@de.bosch.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Set the sensor full frame based on whether the passed in mbus_fmt
is 720x480 (NTSC) or 720x576 (PAL).
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds of-alias id to ipu_soc and retrieve with ipu_get_num().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no one calling imx_drm_crtc_id() and it is just a simple
wrapper of drm_crtc_index() without doing any thing fancy - the
drivers may call drm_crtc_index() directly. So, let's remove the
wrapper.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no one calling imx_drm_crtc_vblank_get/_put() and
they are just two simple wrappers of drm_crtc_vblank_get/_put()
without doing any thing fancy - the drivers may call
drm_crtc_vblank_get/_put() directly. So, let's remove the two
wrappers.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The 'de-active' and 'pixelclk-active' DT properties are evaluated
by of_parse_display_timing() called from of_get_drm_display_mode(),
but later lost in the conversion from videomode.flags to
drm_display_mode.flags.
Enhance of_get_drm_display_mode() to also return the bus flags in a
separate variable, so that they can be passed on to the ipu-di
driver.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
add a helper function to extract information about pixel clock and DE
polarity from DT for use by of_get_drm_display_mode().
While at it, convert spaces to tabs in indentation in drm_modes.h.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When reconfiguring a plane position (as in moving the cursor), the
frame buffer for the cursor isn't changing, so don't call the prepare
or cleanup driver functions.
This avoids making cursor position updates block on all pending rendering.
v3: use drm_atomic_helper_framebuffer_changed in both prepare and
cleanup phases instead of keeping state in the plane.
cc: dri-devel@lists.freedesktop.org
cc: David Airlie <airlied@linux.ie>
cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
[danvet: Rebase onto 4.8]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Except for nouveau, only legacy drivers need this really. And nouveau
is already marked up with DRIVER_KMS_LEGACY_CONTEXT as the special
case.
I've tried to be careful to leave everything related to modeset still
using the DRIVER_MODESET flag. Otherwise it's a direct replacement of
!DRIVER_MODESET with DRIVER_LEGACY checks. Also helps readability
since fewer negative checks overall.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-2-git-send-email-daniel.vetter@ffwll.ch
It's super confusing that new drivers need to be marked with
DRIVER_MODESET when really it means DRIVER_MODERN. Much better to
invert the meaning and rename it to something that's suitably
off-putting.
Since there's over 100 places using DRIVER_MODESET we need to roll out
this change without a flag day.
v2: Update docs.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-1-git-send-email-daniel.vetter@ffwll.ch
At a higher level, all objects are created with definite size i.e. 0 is
illegal. In forthcoming patches, this assumption is dependent upon in
the drm_mm range manager, i.e. trying to create a drm_mm node with size
0 will have undefined behaviour. Add a couple of WARNs upon creating the
drm_mm node to prevent later bugs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470248788-30873-1-git-send-email-chris@chris-wilson.co.uk
The minor referred to by "DRM_MINOR_LEGACY" is called 'dev->primary' and
gets 'cardX' as name assigned. Lets reduce this magnificent number of
names for the same concept by one and rename DRM_MINOR_LEGACY to
DRM_MINOR_PRIMARY (to match the actual struct-member name).
Furthermore, this is in no way a legacy node, so lets not call it that.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160803180432.1341-2-dh.herrmann@gmail.com
In addition to the last-in/first-out stack for accessing drm_mm nodes,
we occasionally and in the future often want to find a drm_mm_node by an
address. To do so efficiently we need to track the nodes in an interval
tree - lookups for a particular address will then be O(lg(N)), where N
is the number of nodes in the range manager as opposed to O(N).
Insertion however gains an extra O(lg(N)) step for all nodes
irrespective of whether the interval tree is in use. For future i915
patches, eliminating the linear walk is a significant improvement.
v2: Use generic interval-tree template for u64 and faster insertion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-1-git-send-email-chris@chris-wilson.co.uk
It was really strange to see negative vblank seqs on debug
messages. It is rare to have that big number, but when it
happens it is confusing and misleading.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470243226-2750-1-git-send-email-rodrigo.vivi@intel.com
A few fixes for amdgpu and ttm for 4.8
- fix a ttm regression caused by the new pipelining code
- fixes for mullins on amdgpu
- updated golden settings for amdgpu
* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
3 intel fixes.
* tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915/fbdev: Check for the framebuffer before use
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
The conversion of the rcar-du driver from the I2C slave encoder to the
DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing
the bridge from being handled automatically by the DRM core. Fix it.
Fixes: 1d926114d8 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull drm zpos property support from Dave Airlie:
"This tree was waiting on some media stuff I hadn't had time to get a
stable branchpoint off, so I just waited until it was all in your tree
first.
It's been around a bit on the list and shouldn't affect anything
outside adding the generic API and moving some ARM drivers to using
it"
* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
drm: rcar: use generic code for managing zpos plane property
drm/exynos: use generic code for managing zpos plane property
drm: sti: use generic zpos for plane
drm: add generic zpos property
~jiffie and a few usecs is 3 orders of magnitude different. A bit
much. This was changed in
commit ca5b721e23
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Dec 11 11:32:58 2015 +0000
drm/i915: Limit the busy wait on requests to 5us not 10ms!
But probably missed the comment since the change was non-local to the
comment.
v2: Polish comment more (Chris).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470413484-23775-1-git-send-email-daniel.vetter@ffwll.ch
We don't have GPU reset support for gen2, which means the display
hardware is unaffected when a GPU hang is handled. However as the ring
has in fact stopped, any flips still in the ring will never complete,
and thus the display base address updates will never happen. So we
really need to fix that up manually just like we do on g4x+.
In fact, let's just use intel_has_gpu_reset() instead of IS_GEN2()
since that'll also handle cases where someone would disable the GPU
reset support on gen3/4 for whatever reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add force_reset_modeset_test as a parameter to force the modeset path during gpu reset.
This allows a IGT test to set the knob and trigger a hang to force the gpu reset,
even on platforms that wouldn't otherwise require it.
Changes since v1:
- Split out fix to separate commit.
Changes since v2:
- This commit is purely about force_reset_modeset_test now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: drv_hangman.reset-with-forced-modeset
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-3-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This function would call drm_modeset_lock_all, while the suspend/resume
functions already have their own locking. Fix this by factoring out
__intel_display_resume, and calling the atomic helpers for duplicating
atomic state and disabling all crtc's during suspend.
Changes since v1:
- Deal with -EDEADLK right after lock_all and clean up calls
to hw readout.
- Always take all modeset locks so updates during gpu reset are blocked.
Changes since v2:
- Fix deadlock in intel_update_primary_planes.
- Move WARN_ON(EDEADLK) to __intel_display_resume.
- pctx -> ctx
- only call __intel_display_resume on success in intel_display_resume.
Changes since v3:
- Rebase on top of dev_priv -> dev change.
- Use drm_modeset_lock_all_ctx instead of drm_modeset_lock_all.
Changes since v4 [by vsyrjala]:
- Deal with skip_intermediate_wm
- Update comment w.r.t. mode_config.mutex vs. ->detect()
- Rebase due to INTEL_GEN() etc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Cc: stable@vger.kernel.org
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-2-git-send-email-ville.syrjala@linux.intel.com
Fixes hangs under memory pressure, e.g. running the piglit test
tex3d-maxsize concurrently with other tests.
Fixes: 17d33bc9d6 ("drm/ttm: drop waiting for idle in ttm_bo_evict.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marking PCH transcoder FIFO underrun reporting as disabled for
transcoder B/C on LPT-H will block us from enabling the south error
interrupt. So let's only mark transcoder A underrun reporting as
disabled initially.
This is a little tricky to hit since you need a machine with LPT-H, and
the BIOS must enable either pipe B or C at boot. Then i915 would mark
the "transcoder B/C" underrun reporting as disabled and never enable it
again, meaning south interrupts would never get enabled either. The only
other interrupt in there is actually the poison interrupt which, if we
could ever trigger it, would just result in a little error in dmesg.
Here's the resulting change in SDEIMR on my HSW when I boot it with
multiple displays attached:
- (0x000c4004): 0xf115ffff
+ (0x000c4004): 0xf114ffff
My previous attempt [1] tried to fix this a little differently, but
Daniel requested I do this instead.
[1] https://lists.freedesktop.org/archives/intel-gfx/2015-November/081420.html
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470416417-15021-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_enable_pipe() looks rather confusing when one side doesn't have
the curly braces, and the other one does. And what's even worse,
there's another if-else inside the braceless side. Let's put braces
around it to make it clear which branch goes where.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470418894-1249-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
When using RCU lookup for the request, commit 0eafec6d32 ("drm/i915:
Enable lockless lookup of request tracking via RCU"), we acknowledge that
we may race with another thread that could have reallocated the request.
In order for the first thread not to blow up, the second thread must not
clear the request completed before overwriting it. In the RCU lookup, we
allow for the engine/seqno to be replaced but we do not allow for it to
be zeroed.
The choice we make is to either add extra checking to the RCU lookup, or
embrace the inherent races (as intended). It is more complicated as we
need to manually clear everything we depend upon being zero initialised,
but we benefit from not emiting the memset() to clear the entire
frequently allocated structure (that memset turns up in throughput
profiles). And at the same time, the lookup remains flexible for future
adjustments.
v2: Old style LRC requires another variable to be initialize. (The
danger inherent in not zeroing everything.)
v3: request->batch also needs to be cleared
v4: signaling.tsk is no long used unset, but pid still exists
Fixes: 0eafec6d32 ("drm/i915: Enable lockless lookup of request...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470731014-6894-2-git-send-email-chris@chris-wilson.co.uk
In the debate as to whether the second read of active->request is
ordered after the dependent reads of the first read of active->request,
just give in and throw a smp_rmb() in there so that ordering of loads is
assured.
v2: Explain the manual smp_rmb()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470731014-6894-1-git-send-email-chris@chris-wilson.co.uk
When we force the cleanup after a GPU hang, we want to retire all
requests, or else we may leak them if truly wedged (and the GPU never
advances again). Converting to the active request helpers had the issue
of doing the check against busyness before reporting the request, so if
we claim the GPU had hung but this engine hadn't we could potential skip
the request cleanup - triggering the self-check BUG.
Fixes: dcff85c844 ("drm/i915: Enable i915_gem_wait_for_idle() ...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470728222-10243-3-git-send-email-chris@chris-wilson.co.uk
This was originally introduced to be used by the busy-ioctl, but in the
end busy ioctl performed a different dance. Since there are no users,
and no likely users, remove an unwanted chunk of the API.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470728222-10243-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No functional change. Instead of defining a new empty function
let's use what is available on drm.
It gets cleaner, and easy to read, and understand.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Copy to user return the number of bytes it couldn't write
and zero on success. So any number different than 0 should
be considered a fault, not only when it doesn't write
the full size.
v2: fixed the inverted logic. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As pointed out by Chris Harris, we are using the wrong WA name, it
should in fact be WaToEnableHwFixForPushConstHWBug, also it should be
applied from C0 onwards for both BXT and KBL.
Fixes: 7b9005cd45 ("drm/i915: Add WaInsertDummyPushConstP for bxt and kbl")
Cc: Chris Harris <chris.harris@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: Chris Harris <chris.harris@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470127013-29653-1-git-send-email-matthew.auld@intel.com
In the previous commit, we moved the obj->tiling_mode out of a bitfield
and into its own integer so that we could safely use READ_ONCE(). Let us
now repair some of that damage by sharing the tiling_mode with its
companion, the fence stride.
v2: New magic
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-18-git-send-email-chris@chris-wilson.co.uk
Through the GTT interface to the fence registers, we can only handle
linear, X and Y tiling. The more esoteric tiling patterns are ignored.
Document that the tiling ABI only supports upto Y tiling, and reject any
attempts to set a tiling mode other than NONE, X or Y.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-17-git-send-email-chris@chris-wilson.co.uk
Since we are not concerned with userspace racing itself with set-tiling
(the order is indeterminant even if we take a lock), then we can safely
read back the single obj->tiling_mode and do the static lookup of
swizzle mode without having to take a lock.
get-tiling is reasonably frequent due to the back-channel passing around
of tiling parameters in DRI2/DRI3.
v2: Make tiling_mode a full unsigned int so that we can trivially use it
with READ_ONCE(). Separating it out into manual control over the flags
field was too noisy for a simple patch. Note that we could use the lower
bits of obj->stride for the tiling mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-16-git-send-email-chris@chris-wilson.co.uk
We don't need to incur the overhead of checking whether the object is
pinned prior to changing its madvise. If the object is pinned, the
madvise will not take effect until it is unpinned and so we cannot free
the pages being pointed at by hardware. Marking a pinned object with
allocated pages as DONTNEED will not trigger any undue warnings. The check
is therefore superfluous, and by removing it we can remove a linear walk
over all the vma the object has.
Still despite it being an overzealous check, that error code is part of
the current ABI and so we must proceed with caution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-15-git-send-email-chris@chris-wilson.co.uk
We only need to take the struct_mutex if the object is pinned to the
display engine and so requires checking for clflush. (The race with
userspace pinning the object to a framebuffer is irrelevant.)
v2: Use access once for compiler hints (or not as it is a bitfield)
v3: READ_ONCE, obj->pin_display is not a bitfield anymore
v4: Don't be creative with goto.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-14-git-send-email-chris@chris-wilson.co.uk
By applying the same logic as for wait-ioctl, we can query whether a
request has completed without holding struct_mutex. The biggest impact
system-wide is removing the flush_active and the contention that causes.
Testcase: igt/gem_busy
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-13-git-send-email-chris@chris-wilson.co.uk
With a bit of care (and leniency) we can iterate over the object and
wait for previous rendering to complete with judicial use of atomic
reference counting. The ABI requires us to ensure that an active object
is eventually flushed (like the busy-ioctl) which is guaranteed by our
management of requests (i.e. everything that is submitted to hardware is
flushed in the same request). All we have to do is ensure that we can
detect when the requests are complete for reporting when the object is
idle (without triggering ETIME), locklessly - this is handled by
i915_gem_active_wait_unlocked().
The impact of this is actually quite small - the return to userspace
following the wait was already lockless and so we don't see much gain in
latency improvement upon completing the wait. What we do achieve here is
completing an already finished wait without hitting the struct_mutex,
our hold is quite short and so we are typically just a victim of
contention rather than a cause - but it is still one less contention
point!
v2: Break up a long line.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-12-git-send-email-chris@chris-wilson.co.uk
If we try and read or write to an active request, we first must wait
upon the GPU completing that request. Let's do that without holding the
mutex (and so allow someone else to access the GPU whilst we wait). Upon
completion, we will acquire the mutex and only then start the operation
(i.e. we do not rely on state from before the initial wait).
v2: Repaint the goto labels
v3: Move the tracepoints back to the start of the ioctls
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-11-git-send-email-chris@chris-wilson.co.uk
If we make the observation that mmap-offsets are only released when we
free an object, we can then deduce that the shrinker only creates free
space in the mmap arena indirectly by flushing the request list and
freeing expired objects. If we combine this with the lockless
vma-manager and lockless idling, we can avoid taking our big struct_mutex
until we need to actually free the requests.
One side-effect is that we defer the madvise checking until we need the
pages (i.e. the fault handler). This brings us into line with the other
delayed checks (and madvise in general).
v2: s/ret/err/ and use if (!err) rather than if (ret == 0)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-9-git-send-email-chris@chris-wilson.co.uk
We can now wait for the GPU (all engines) to become idle without
requiring the struct_mutex. Inside the shrinker, we need to currently
take the struct_mutex in order to purge objects and to purge the objects
we need the GPU to be idle - causing a stall whilst we hold the
struct_mutex. We can hide most of that stall by performing the wait
before taking the struct_mutex and only doing essential waits for
new rendering on objects to be freed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-8-git-send-email-chris@chris-wilson.co.uk
Now that we pass along the expected interruptible nature for the
wait-for-idle, we do not need to modify the global
i915->mm.interruptible for this single call. (Only the immediate call to
i915_gem_wait_for_idle() takes the interruptible status as the other
action, dma_map_sg(), is independent of i915.ko)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-7-git-send-email-chris@chris-wilson.co.uk
The principal motivation for this was to try and eliminate the
struct_mutex from i915_gem_suspend - but we still need to hold the mutex
current for the i915_gem_context_lost(). (The issue there is that there
may be an indirect lockdep cycle between cpu_hotplug (i.e. suspend) and
struct_mutex via the stop_machine().) For the moment, enabling last
request tracking for the engine, allows us to do busyness checking and
waiting without requiring the struct_mutex - which is useful in its own
right.
As a side-effect of having a robust means for tracking engine busyness,
we can replace our other busyness heuristic, that of comparing against
the last submitted seqno. For paranoid reasons, we have a semi-ordered
check of that seqno inside the hangchecker, which we can now improve to
an ordered check of the engine's busyness (removing a locked xchg in the
process).
v2: Pass along "bool interruptible" as being unlocked we cannot rely on
i915->mm.interruptible being stable or even under our control.
v3: Replace check Ironlake i915_gpu_busy() with the common precalculated value
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-6-git-send-email-chris@chris-wilson.co.uk
Before suspending (or unloading), we would first wait upon all rendering
to be completed and then disable the rings. This later step is a remanent
from DRI1 days when we did not use request tracking for all operations
upon the ring. Now that we are sure we are waiting upon the very last
operation by the engine, we can forgo clobbering the ring registers,
though we do keep the assert that the engine is indeed idle before
sleeping.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-5-git-send-email-chris@chris-wilson.co.uk
We can completely avoid taking the struct_mutex around the non-blocking
waits by switching over to the RCU request management (trading the mutex
for a RCU read lock and some complex atomic operations). The improvement
is that we gain further contention reduction, and overall the code
become simpler due to the reduced mutex dancing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-3-git-send-email-chris@chris-wilson.co.uk
We can completely avoid taking the struct_mutex around the non-blocking
waits by switching over to the RCU request management (trading the mutex
for a RCU read lock and some complex atomic operations). The improvement
is that we gain further contention reduction, and overall the code
become simpler due to the reduced mutex dancing.
v2: Move i915_gem_fault tracepoint back to the start of the function,
before the unlocked wait.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-2-git-send-email-chris@chris-wilson.co.uk
It is useful to be able to wait on pending rendering without grabbing
the struct_mutex. We can do this by using the i915_gem_active_get_rcu()
primitive to acquire a reference to the pending request without
requiring struct_mutex, just the RCU read lock, and then call
i915_wait_request().
v2: Rebase onto new i915_gem_active_get_unlocked() semantics that take
the RCU read lock on behalf of the caller.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-1-git-send-email-chris@chris-wilson.co.uk
Backmerge the 4.8 pull request state from Dave - conflicts were
getting out of hand, and Chris has some patches which outright don't
apply without everything merged together again.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The bspec was updated a couple weeks ago to add an extra block per line
to plane watermark calculations for linear pixel formats.
Bspec update 115327 description:
"Gen9+ - Updated the plane blocks per line calculation for linear
cases. Adds +1 for all linear cases to handle the non-block aligned
stride cases."
Cc: Lyude <cpaul@redhat.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470344880-27394-1-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Lyude <cpaul@redhat.com>
Chris Wilson