fscrypt uses a Base64 encoding to encode no-key filenames (the filenames
that are presented to userspace when a directory is listed without its
encryption key). There are many variants of Base64, but the most common
ones are specified by RFC 4648. fscrypt can't use the regular RFC 4648
"base64" variant because "base64" uses the '/' character, which isn't
allowed in filenames. However, RFC 4648 also specifies a "base64url"
variant for use in URLs and filenames. "base64url" is less common than
"base64", but it's still implemented in many programming libraries.
Unfortunately, what fscrypt actually uses is a custom Base64 variant
that differs from "base64url" in several ways:
- The binary data is divided into 6-bit chunks differently.
- Values 62 and 63 are encoded with '+' and ',' instead of '-' and '_'.
- '='-padding isn't used. This isn't a problem per se, as the padding
isn't technically necessary, and RFC 4648 doesn't strictly require it.
But it needs to be properly documented.
There have been two attempts to copy the fscrypt Base64 code into lib/
(https://lkml.kernel.org/r/20200821182813.52570-6-jlayton@kernel.org and
https://lkml.kernel.org/r/20210716110428.9727-5-hare@suse.de), and both
have been caught up by the fscrypt Base64 variant being nonstandard and
not properly documented. Also, the planned use of the fscrypt Base64
code in the CephFS storage back-end will prevent it from being changed
later (whereas currently it can still be changed), so we need to choose
an encoding that we're happy with before it's too late.
Therefore, switch the fscrypt Base64 variant to base64url, in order to
align more closely with RFC 4648 and other implementations and uses of
Base64. However, I opted not to implement '='-padding, as '='-padding
adds complexity, is unnecessary, and isn't required by the RFC.
Link: https://lore.kernel.org/r/20210718000125.59701-1-ebiggers@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the
minor_hash to 0 if the (major) hash is 0.
This doesn't make sense because 0 is a valid hash code, so we shouldn't
ignore the filesystem-provided minor_hash in that case. Fix this by
removing the special case for 'hash == 0'.
This is an old bug that appears to have originated when the encryption
code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and
f2fs code passed the hash by pointer instead of by value. So
'if (hash)' actually made sense then, as it was checking whether a
pointer was NULL. But now the hashes are passed by value, and
filesystems just pass 0 for any hashes they don't have. There is no
need to handle this any differently from the hashes actually being 0.
It is difficult to reproduce this bug, as it only made a difference in
the case where a filename's 32-bit major hash happened to be 0.
However, it probably had the largest chance of causing problems on
ubifs, since ubifs uses minor_hash to do lookups of no-key names, in
addition to using it as a readdir cookie. ext4 only uses minor_hash as
a readdir cookie, and f2fs doesn't use minor_hash at all.
Fixes: 0b81d07790 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc: <stable@vger.kernel.org> # v4.6+
Link: https://lore.kernel.org/r/20210527235236.2376556-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
In this round, we've made more work into per-file compression support. For
example, F2FS_IOC_GET|SET_COMPRESS_OPTION provides a way to change the
algorithm or cluster size per file. F2FS_IOC_COMPRESS|DECOMPRESS_FILE provides
a way to compress and decompress the existing normal files manually along with
a new mount option, compress_mode=fs|user, which can control who compresses the
data. Chao also added a checksum feature with a mount option so that we are able
to detect any corrupted cluster. In addition, Daniel contributed casefolding
with encryption patch, which will be used for Android devices.
Enhancement:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fix:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl/a8ywACgkQQBSofoJI
UNLa2RAAjK+6tOs+NuYx2w9SegghKxwCg4Mb362BMdaAGx6GzMqAkCiVdujuoz/r
+wy8sdqO9QE7723ZDNsebNMLRnkNPHnpneSL2p6OsSLJrD3ORTELVRrzNlkemvnK
rRHZyYnNJvQQnD4uU7ABvROKsIDw/nCfcFvzHmLIgEw8EHO0W4n6fTtBdTwXv1qi
N3qXhGuQldonR9XICuGjzj7wh17n9ua6Mr12XX3Ok38giMcZb9KFBwgvlhl35cxt
htEmUpxWD3NTSw6zJmV4VAiajpiIkW6QRQuVA1nzdLZK644gaJMhM1EUsOnZhfDl
wX0ZtKoNkXxb0glD34O3aYqeHJ3tHWgPmmpVm9TECJP9A/X7kmEHgQYpH/eJ9I7d
tk51Uz28Mz1RShXU4i5RyKZeeoNTLiVlqiC95E2cnq4C1tLOJyI00N9AinrLzvR+
fqUrAwCrBpiYX63mWKYwq7GWxWwp4+PY09kyIZxxJiWhTE/St0bRx2bQL8zA8C6J
Rtxl+QWyQhkFbNu8fAukLFAhC6mqX/FKpXvUqRehBnHRvMWBiVZG0//eOPQLk71u
qsdCgYuEVcg3itDQrZvmsjxi4Pb5E9mNr0s5oC4I2WvBPMheD4esSyG7cKDN0qfS
3FFHlRYLOvnjPMLnKTmZXjFvFyHR8mwsD4Z83MeSrqYnWC14tFY=
=KneU
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've made more work into per-file compression support.
For example, F2FS_IOC_GET | SET_COMPRESS_OPTION provides a way to
change the algorithm or cluster size per file. F2FS_IOC_COMPRESS |
DECOMPRESS_FILE provides a way to compress and decompress the existing
normal files manually.
There is also a new mount option, compress_mode=fs|user, which can
control who compresses the data.
Chao also added a checksum feature with a mount option so that
we are able to detect any corrupted cluster.
In addition, Daniel contributed casefolding with encryption patch,
which will be used for Android devices.
Summary:
Enhancements:
- add ioctls and mount option to manage per-file compression feature
- support casefolding with encryption
- support checksum for compressed cluster
- avoid IO starvation by replacing mutex with rwsem
- add sysfs, max_io_bytes, to control max bio size
Bug fixes:
- fix use-after-free issue when compression and fsverity are enabled
- fix consistency corruption during fault injection test
- fix data offset for lseek
- get rid of buffer_head which has 32bits limit in fiemap
- fix some bugs in multi-partitions support
- fix nat entry count calculation in shrinker
- fix some stat information
And, we've refactored some logics and fix minor bugs as well"
* tag 'f2fs-for-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (36 commits)
f2fs: compress: fix compression chksum
f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
f2fs: fix race of pending_pages in decompression
f2fs: fix to account inline xattr correctly during recovery
f2fs: inline: fix wrong inline inode stat
f2fs: inline: correct comment in f2fs_recover_inline_data
f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
f2fs: convert to F2FS_*_INO macro
f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
f2fs: don't allow any writes on readonly mount
f2fs: avoid race condition for shrinker count
f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
f2fs: add compress_mode mount option
f2fs: Remove unnecessary unlikely()
f2fs: init dirty_secmap incorrectly
f2fs: remove buffer_head which has 32bits limit
f2fs: fix wrong block count instead of bytes
f2fs: use new conversion functions between blks and bytes
f2fs: rename logical_to_blk and blk_to_logical
f2fs: fix kbytes written stat for multi-device case
...
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
This shifts the responsibility of setting up dentry operations from
fscrypt to the individual filesystems, allowing them to have their own
operations while still setting fscrypt's d_revalidate as appropriate.
Most filesystems can just use generic_set_encrypted_ci_d_ops, unless
they have their own specific dentry operations as well. That operation
will set the minimal d_ops required under the circumstances.
Since the fscrypt d_ops are set later on, we must set all d_ops there,
since we cannot adjust those later on. This should not result in any
change in behavior.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently it's impossible to delete files that use an unsupported
encryption policy, as the kernel will just return an error when
performing any operation on the top-level encrypted directory, even just
a path lookup into the directory or opening the directory for readdir.
More specifically, this occurs in any of the following cases:
- The encryption context has an unrecognized version number. Current
kernels know about v1 and v2, but there could be more versions in the
future.
- The encryption context has unrecognized encryption modes
(FSCRYPT_MODE_*) or flags (FSCRYPT_POLICY_FLAG_*), an unrecognized
combination of modes, or reserved bits set.
- The encryption key has been added and the encryption modes are
recognized but aren't available in the crypto API -- for example, a
directory is encrypted with FSCRYPT_MODE_ADIANTUM but the kernel
doesn't have CONFIG_CRYPTO_ADIANTUM enabled.
It's desirable to return errors for most operations on files that use an
unsupported encryption policy, but the current behavior is too strict.
We need to allow enough to delete files, so that people can't be stuck
with undeletable files when downgrading kernel versions. That includes
allowing directories to be listed and allowing dentries to be looked up.
Fix this by modifying the key setup logic to treat an unsupported
encryption policy in the same way as "key unavailable" in the cases that
are required for a recursive delete to work: preparing for a readdir or
a dentry lookup, revalidating a dentry, or checking whether an inode has
the same encryption policy as its parent directory.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dentries that represent no-key names must have a dentry_operations that
includes fscrypt_d_revalidate(). Currently, this is handled by
fscrypt_prepare_lookup() installing fscrypt_d_ops.
However, ceph support for encryption
(https://lore.kernel.org/r/20200914191707.380444-1-jlayton@kernel.org)
can't use fscrypt_d_ops, since ceph already has its own
dentry_operations.
Similarly, ext4 and f2fs support for directories that are both encrypted
and casefolded
(https://lore.kernel.org/r/20200923010151.69506-1-drosen@google.com)
can't use fscrypt_d_ops either, since casefolding requires some dentry
operations too.
To satisfy both users, we need to move the responsibility of installing
the dentry_operations to filesystems.
In preparation for this, export fscrypt_d_revalidate() and give it a
!CONFIG_FS_ENCRYPTION stub.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200924054721.187797-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Originally we used the term "encrypted name" or "ciphertext name" to
mean the encoded filename that is shown when an encrypted directory is
listed without its key. But these terms are ambiguous since they also
mean the filename stored on-disk. "Encrypted name" is especially
ambiguous since it could also be understood to mean "this filename is
encrypted on-disk", similar to "encrypted file".
So we've started calling these encoded names "no-key names" instead.
Therefore, rename DCACHE_ENCRYPTED_NAME to DCACHE_NOKEY_NAME to avoid
confusion about what this flag means.
Link: https://lore.kernel.org/r/20200924042624.98439-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Currently we're using the term "ciphertext name" ambiguously because it
can mean either the actual ciphertext filename, or the encoded filename
that is shown when an encrypted directory is listed without its key.
The latter we're now usually calling the "no-key name"; and while it's
derived from the ciphertext name, it's not the same thing.
To avoid this ambiguity, rename fscrypt_name::is_ciphertext_name to
fscrypt_name::is_nokey_name, and update comments that say "ciphertext
name" (or "encrypted name") to say "no-key name" instead when warranted.
Link: https://lore.kernel.org/r/20200924042624.98439-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that there's a library function that calculates the SHA-256 digest
of a buffer in one step, use it instead of sha256_init() +
sha256_update() + sha256_final().
Link: https://lore.kernel.org/r/20200917045341.324996-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The behavior of the test_dummy_encryption mount option is that when a
new file (or directory or symlink) is created in an unencrypted
directory, it's automatically encrypted using a dummy encryption policy.
That's it; in particular, the encryption (or lack thereof) of existing
files (or directories or symlinks) doesn't change.
Unfortunately the implementation of test_dummy_encryption is a bit weird
and confusing. When test_dummy_encryption is enabled and a file is
being created in an unencrypted directory, we set up an encryption key
(->i_crypt_info) for the directory. This isn't actually used to do any
encryption, however, since the directory is still unencrypted! Instead,
->i_crypt_info is only used for inheriting the encryption policy.
One consequence of this is that the filesystem ends up providing a
"dummy context" (policy + nonce) instead of a "dummy policy". In
commit ed318a6cc0 ("fscrypt: support test_dummy_encryption=v2"), I
mistakenly thought this was required. However, actually the nonce only
ends up being used to derive a key that is never used.
Another consequence of this implementation is that it allows for
'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge
case that can be forgotten about. For example, currently
FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the
dummy encryption policy when the filesystem is mounted with
test_dummy_encryption. That seems like the wrong thing to do, since
again, the directory itself is not actually encrypted.
Therefore, switch to a more logical and maintainable implementation
where the dummy encryption policy inheritance is done without setting up
keys for unencrypted directories. This involves:
- Adding a function fscrypt_policy_to_inherit() which returns the
encryption policy to inherit from a directory. This can be a real
policy, a dummy policy, or no policy.
- Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc.
with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc.
- Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead
of an inode.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_do_sha256() is only used for hashing encrypted filenames to
create no-key tokens, which isn't performance-critical. Therefore a C
implementation of SHA-256 is sufficient.
Also, the logic to create no-key tokens is always potentially needed.
This differs from fscrypt's other dependencies on crypto API algorithms,
which are conditionally needed depending on what encryption policies
userspace is using. Therefore, for fscrypt there isn't much benefit to
allowing SHA-256 to be a loadable module.
So, make fscrypt_do_sha256() use the SHA-256 library instead of the
crypto_shash API. This is much simpler, since it avoids having to
implement one-time-init (which is hard to do correctly, and in fact was
implemented incorrectly) and handle failures to allocate the
crypto_shash object.
Fixes: edc440e3d2 ("fscrypt: improve format of no-key names")
Cc: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20200721225920.114347-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add support for inline encryption to fs/crypto/. With "inline
encryption", the block layer handles the decryption/encryption as part
of the bio, instead of the filesystem doing the crypto itself via
Linux's crypto API. This model is needed in order to take advantage of
the inline encryption hardware present on most modern mobile SoCs.
To use inline encryption, the filesystem needs to be mounted with
'-o inlinecrypt'. Blk-crypto will then be used instead of the traditional
filesystem-layer crypto whenever possible to encrypt the contents
of any encrypted files in that filesystem. Fscrypt still provides the key
and IV to use, and the actual ciphertext on-disk is still the same;
therefore it's testable using the existing fscrypt ciphertext verification
tests.
Note that since blk-crypto has a fallback to Linux's crypto API, and
also supports all the encryption modes currently supported by fscrypt,
this feature is usable and testable even without actual inline
encryption hardware.
Per-filesystem changes will be needed to set encryption contexts when
submitting bios and to implement the 'inlinecrypt' mount option. This
patch just adds the common code.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200702015607.1215430-3-satyat@google.com
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Add the IV_INO_LBLK_32 encryption policy flag which modifies the
encryption to be optimized for eMMC inline encryption hardware.
- Make the test_dummy_encryption mount option for ext4 and f2fs support
v2 encryption policies.
- Fix kerneldoc warnings and some coding style inconsistencies.
There will be merge conflicts with the ext4 and f2fs trees due to the
test_dummy_encryption change, but the resolutions are straightforward.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXtScMBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxC6AP0eOEkMrc9e10YftdN6xsyRjvqiPyFg
oMjuU+SvQ+/sVgEAo0mBFITnl75ZGb8PyqXCNMDAy6uHaxcEjVGufx5q2QE=
=dbxy
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
- Add the IV_INO_LBLK_32 encryption policy flag which modifies the
encryption to be optimized for eMMC inline encryption hardware.
- Make the test_dummy_encryption mount option for ext4 and f2fs support
v2 encryption policies.
- Fix kerneldoc warnings and some coding style inconsistencies.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add support for IV_INO_LBLK_32 policies
fscrypt: make test_dummy_encryption use v2 by default
fscrypt: support test_dummy_encryption=v2
fscrypt: add fscrypt_add_test_dummy_key()
linux/parser.h: add include guards
fscrypt: remove unnecessary extern keywords
fscrypt: name all function parameters
fscrypt: fix all kerneldoc warnings
Fix all kerneldoc warnings in fs/crypto/ and include/linux/fscrypt.h.
Most of these were due to missing documentation for function parameters.
Detected with:
scripts/kernel-doc -v -none fs/crypto/*.{c,h} include/linux/fscrypt.h
This cleanup makes it possible to check new patches for kerneldoc
warnings without having to filter out all the existing ones.
For consistency, also adjust some function "brief descriptions" to
include the parentheses and to wrap at 80 characters. (The latter
matches the checkpatch expectation.)
Link: https://lore.kernel.org/r/20200511191358.53096-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Instead of manually allocating a 'struct shash_desc' on the stack and
calling crypto_shash_digest(), switch to using the new helper function
crypto_shash_tfm_digest() which does this for us.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an encrypted directory is listed without the key, the filesystem
must show "no-key names" that uniquely identify directory entries, are
at most 255 (NAME_MAX) bytes long, and don't contain '/' or '\0'.
Currently, for short names the no-key name is the base64 encoding of the
ciphertext filename, while for long names it's the base64 encoding of
the ciphertext filename's dirhash and second-to-last 16-byte block.
This format has the following problems:
- Since it doesn't always include the dirhash, it's incompatible with
directories that will use a secret-keyed dirhash over the plaintext
filenames. In this case, the dirhash won't be computable from the
ciphertext name without the key, so it instead must be retrieved from
the directory entry and always included in the no-key name.
Casefolded encrypted directories will use this type of dirhash.
- It's ambiguous: it's possible to craft two filenames that map to the
same no-key name, since the method used to abbreviate long filenames
doesn't use a proper cryptographic hash function.
Solve both these problems by switching to a new no-key name format that
is the base64 encoding of a variable-length structure that contains the
dirhash, up to 149 bytes of the ciphertext filename, and (if any bytes
remain) the SHA-256 of the remaining bytes of the ciphertext filename.
This ensures that each no-key name contains everything needed to find
the directory entry again, contains only legal characters, doesn't
exceed NAME_MAX, is unambiguous unless there's a SHA-256 collision, and
that we only take the performance hit of SHA-256 on very long filenames.
Note: this change does *not* address the existing issue where users can
modify the 'dirhash' part of a no-key name and the filesystem may still
accept the name.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved comments and commit message, fixed checking return value
of base64_decode(), check for SHA-256 error, continue to set disk_name
for short names to keep matching simpler, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When we allow indexed directories to use both encryption and
casefolding, for the dirhash we can't just hash the ciphertext filenames
that are stored on-disk (as is done currently) because the dirhash must
be case insensitive, but the stored names are case-preserving. Nor can
we hash the plaintext names with an unkeyed hash (or a hash keyed with a
value stored on-disk like ext4's s_hash_seed), since that would leak
information about the names that encryption is meant to protect.
Instead, if we can accept a dirhash that's only computable when the
fscrypt key is available, we can hash the plaintext names with a keyed
hash using a secret key derived from the directory's fscrypt master key.
We'll use SipHash-2-4 for this purpose.
Prepare for this by deriving a SipHash key for each casefolded encrypted
directory. Make sure to handle deriving the key not only when setting
up the directory's fscrypt_info, but also in the case where the casefold
flag is enabled after the fscrypt_info was already set up. (We could
just always derive the key regardless of casefolding, but that would
introduce unnecessary overhead for people not using casefolding.)
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, squashed with change
that avoids unnecessarily deriving the key, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fname_encrypt() is a global function, due to being used in both fname.c
and hooks.c. So it should be prefixed with "fscrypt_", like all the
other global functions in fs/crypto/.
Link: https://lore.kernel.org/r/20200120071736.45915-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_d_revalidate() and fscrypt_d_ops really belong in fname.c, since
they're specific to filenames encryption. crypto.c is for contents
encryption and general fs/crypto/ initialization and utilities.
Link: https://lore.kernel.org/r/20191209204359.228544-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a new fscrypt policy version, "v2". It has the following changes
from the original policy version, which we call "v1" (*):
- Master keys (the user-provided encryption keys) are only ever used as
input to HKDF-SHA512. This is more flexible and less error-prone, and
it avoids the quirks and limitations of the AES-128-ECB based KDF.
Three classes of cryptographically isolated subkeys are defined:
- Per-file keys, like used in v1 policies except for the new KDF.
- Per-mode keys. These implement the semantics of the DIRECT_KEY
flag, which for v1 policies made the master key be used directly.
These are also planned to be used for inline encryption when
support for it is added.
- Key identifiers (see below).
- Each master key is identified by a 16-byte master_key_identifier,
which is derived from the key itself using HKDF-SHA512. This prevents
users from associating the wrong key with an encrypted file or
directory. This was easily possible with v1 policies, which
identified the key by an arbitrary 8-byte master_key_descriptor.
- The key must be provided in the filesystem-level keyring, not in a
process-subscribed keyring.
The following UAPI additions are made:
- The existing ioctl FS_IOC_SET_ENCRYPTION_POLICY can now be passed a
fscrypt_policy_v2 to set a v2 encryption policy. It's disambiguated
from fscrypt_policy/fscrypt_policy_v1 by the version code prefix.
- A new ioctl FS_IOC_GET_ENCRYPTION_POLICY_EX is added. It allows
getting the v1 or v2 encryption policy of an encrypted file or
directory. The existing FS_IOC_GET_ENCRYPTION_POLICY ioctl could not
be used because it did not have a way for userspace to indicate which
policy structure is expected. The new ioctl includes a size field, so
it is extensible to future fscrypt policy versions.
- The ioctls FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY,
and FS_IOC_GET_ENCRYPTION_KEY_STATUS now support managing keys for v2
encryption policies. Such keys are kept logically separate from keys
for v1 encryption policies, and are identified by 'identifier' rather
than by 'descriptor'. The 'identifier' need not be provided when
adding a key, since the kernel will calculate it anyway.
This patch temporarily keeps adding/removing v2 policy keys behind the
same permission check done for adding/removing v1 policy keys:
capable(CAP_SYS_ADMIN). However, the next patch will carefully take
advantage of the cryptographically secure master_key_identifier to allow
non-root users to add/remove v2 policy keys, thus providing a full
replacement for v1 policies.
(*) Actually, in the API fscrypt_policy::version is 0 while on-disk
fscrypt_context::format is 1. But I believe it makes the most sense
to advance both to '2' to have them be in sync, and to consider the
numbering to start at 1 except for the API quirk.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Update fs/crypto/ to use the new names for the UAPI constants rather
than the old names, then make the old definitions conditional on
!__KERNEL__.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Most of the warning and error messages in fs/crypto/ are for situations
related to a specific inode, not merely to a super_block. So to make
things easier, make fscrypt_msg() take an inode rather than a
super_block, and make it print the inode number.
Note: This is the same approach I'm taking for fsverity_msg().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Some minor cleanups for the code that base64 encodes and decodes
encrypted filenames and long name digests:
- Rename "digest_{encode,decode}()" => "base64_{encode,decode}()" since
they are used for filenames too, not just for long name digests.
- Replace 'while' loops with more conventional 'for' loops.
- Use 'u8' for binary data. Keep 'char' for string data.
- Fully constify the lookup table (pointer was not const).
- Improve comment.
No actual change in behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
These should have been removed during commit 544d08fde2 ("fscrypt: use
a common logging function"), but I missed them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
->lookup() in an encrypted directory begins as follows:
1. fscrypt_prepare_lookup():
a. Try to load the directory's encryption key.
b. If the key is unavailable, mark the dentry as a ciphertext name
via d_flags.
2. fscrypt_setup_filename():
a. Try to load the directory's encryption key.
b. If the key is available, encrypt the name (treated as a plaintext
name) to get the on-disk name. Otherwise decode the name
(treated as a ciphertext name) to get the on-disk name.
But if the key is concurrently added, it may be found at (2a) but not at
(1a). In this case, the dentry will be wrongly marked as a ciphertext
name even though it was actually treated as plaintext.
This will cause the dentry to be wrongly invalidated on the next lookup,
potentially causing problems. For example, if the racy ->lookup() was
part of sys_mount(), then the new mount will be detached when anything
tries to access it. This is despite the mountpoint having a plaintext
path, which should remain valid now that the key was added.
Of course, this is only possible if there's a userspace race. Still,
the additional kernel-side race is confusing and unexpected.
Close the kernel-side race by changing fscrypt_prepare_lookup() to also
set the on-disk filename (step 2b), consistent with the d_flags update.
Fixes: 28b4c26396 ("ext4 crypto: revalidate dentry after adding or removing the key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
->i_crypt_info starts out NULL and may later be locklessly set to a
non-NULL value by the cmpxchg() in fscrypt_get_encryption_info().
But ->i_crypt_info is used directly, which technically is incorrect.
It's a data race, and it doesn't include the data dependency barrier
needed to safely dereference the pointer on at least one architecture.
Fix this by using READ_ONCE() instead. Note: we don't need to use
smp_load_acquire(), since dereferencing the pointer only requires a data
dependency barrier, which is already included in READ_ONCE(). We also
don't need READ_ONCE() in places where ->i_crypt_info is unconditionally
dereferenced, since it must have already been checked.
Also downgrade the cmpxchg() to cmpxchg_release(), since RELEASE
semantics are sufficient on the write side.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS. See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details. Also see
commit 059c2a4d8e ("crypto: adiantum - add Adiantum support").
On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function. These algorithms are fast even on processors
without dedicated crypto instructions. Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted. On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.
In fscrypt, Adiantum is suitable for encrypting both file contents and
names. With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.
Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode. This
configuration saves memory and improves performance. A new fscrypt
policy flag is added to allow users to opt-in to this configuration.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use a common function for fscrypt warning and error messages so that all
the messages are consistently ratelimited, include the "fscrypt:"
prefix, and include the filesystem name if applicable.
Also fix up a few of the log messages to be more descriptive.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now ->max_namelen() is only called to limit the filename length when
adding NUL padding, and only for real filenames -- not symlink targets.
It also didn't give the correct length for symlink targets anyway since
it forgot to subtract 'sizeof(struct fscrypt_symlink_data)'.
Thus, change ->max_namelen from a function to a simple 'unsigned int'
that gives the filesystem's maximum filename length.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fname_decrypt() is validating that the encrypted filename is nonempty.
However, earlier a stronger precondition was already enforced: the
encrypted filename must be at least 16 (FS_CRYPTO_BLOCK_SIZE) bytes.
Drop the redundant check for an empty filename.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fname_decrypt() returns an error if the input filename is longer than
the inode's ->max_namelen() as given by the filesystem. But, this
doesn't actually make sense because the filesystem provided the input
filename in the first place, where it was subject to the filesystem's
limits. And fname_decrypt() has no internal limit itself.
Thus, remove this unnecessary check.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In fscrypt_setup_filename(), remove the unnecessary check for
fscrypt_get_encryption_info() returning EOPNOTSUPP. There's no reason
to handle this error differently from any other. I think there may have
been some confusion because the "notsupp" version of
fscrypt_get_encryption_info() returns EOPNOTSUPP -- but that's not
applicable from inside fs/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
skcipher_request_alloc() can only fail due to lack of memory, and in
that case the memory allocator will have already printed a detailed
error message. Thus, remove the redundant error messages from fscrypt.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems don't need fscrypt_fname_encrypted_size() anymore, so
unexport it and move it to fscrypt_private.h.
We also never calculate the encrypted size of a filename without having
the fscrypt_info present since it is needed to know the amount of
NUL-padding which is determined by the encryption policy, and also we
will always truncate the NUL-padding to the maximum filename length.
Therefore, also make fscrypt_fname_encrypted_size() assume that the
fscrypt_info is present, and make it truncate the returned length to the
specified max_len.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously fscrypt_fname_alloc_buffer() was used to allocate buffers for
both presented (decrypted or encoded) and encrypted filenames. That was
confusing, because it had to allocate the worst-case size for either,
e.g. including NUL-padding even when it was meaningless.
But now that fscrypt_setup_filename() no longer calls it, it is only
used in the ->get_link() and ->readdir() paths, which specifically want
a buffer for presented filenames. Therefore, switch the behavior over
to allocating the buffer for presented filenames only.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, when encrypting a filename (either a real filename or a
symlink target) we calculate the amount of NUL-padding twice: once
before encryption and once during encryption in fname_encrypt(). It is
needed before encryption to allocate the needed buffer size as well as
calculate the size the symlink target will take up on-disk before
creating the symlink inode. Calculating the size during encryption as
well is redundant.
Remove this redundancy by always calculating the exact size beforehand,
and making fname_encrypt() just add as much NUL padding as is needed to
fill the output buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_fname_usr_to_disk() sounded very generic but was actually only
used to encrypt symlinks. Remove it now that all filesystems have been
switched over to fscrypt_encrypt_symlink().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, filesystems supporting fscrypt need to implement some tricky
logic when creating encrypted symlinks, including handling a peculiar
on-disk format (struct fscrypt_symlink_data) and correctly calculating
the size of the encrypted symlink. Introduce helper functions to make
things a bit easier:
- fscrypt_prepare_symlink() computes and validates the size the symlink
target will require on-disk.
- fscrypt_encrypt_symlink() creates the encrypted target if needed.
The new helpers actually fix some subtle bugs. First, when checking
whether the symlink target was too long, filesystems didn't account for
the fact that the NUL padding is meant to be truncated if it would cause
the maximum length to be exceeded, as is done for filenames in
directories. Consequently users would receive ENAMETOOLONG when
creating symlinks close to what is supposed to be the maximum length.
For example, with EXT4 with a 4K block size, the maximum symlink target
length in an encrypted directory is supposed to be 4093 bytes (in
comparison to 4095 in an unencrypted directory), but in
FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted.
Second, symlink targets of "." and ".." were not being encrypted, even
though they should be, as these names are special in *directory entries*
but not in symlink targets. Fortunately, we can fix this simply by
starting to encrypt them, as old kernels already accept them in
encrypted form.
Third, the output string length the filesystems were providing when
doing the actual encryption was incorrect, as it was forgotten to
exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this
bug didn't make a difference.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt.h included way too many other headers, given that it is included
by filesystems both with and without encryption support. Trim down the
includes list by moving the needed includes into more appropriate
places, and removing the unneeded ones.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only fs/crypto/fname.c cares about treating the "." and ".." filenames
specially with regards to encryption, so move fscrypt_is_dot_dotdot()
from fscrypt.h to there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloI8AUACgkQ8vlZVpUN
gaMdjgf8CCW7UhPjoZYwF8sUNtAaX9+JZT1maOcXUhpJ3vRQiRn+AzRH6yBYMm79
+NZBwVlk4dlEe55Wh4yFIStMAstqzCrke4C9CSbExjgHNsJdU4znyYuLRMbLfyO0
6c4NObiAIKJdW1/te1aN90keGC6min8pBZot+FqZsRr+Kq2+IOtM43JAv7efOLev
v3LCjUf9JKxatoB8tgw4AJRa1p18p7D2APWTG05VlFq63TjhVIYNvvwcQlizLwGY
cuEq3X59FbFdX06fJnucujU3WP3ES4/3rhufBK4NNaec5e5dbnH2KlAx7J5SyMIZ
0qUFB/dmXDSb3gsfScSGo1F71Ad0CA==
=asAm
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
fscrypt starts several async. crypto ops and waiting for them to
complete. Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IS_ENCRYPTED() now gives the same information as
i_sb->s_cop->is_encrypted() but is more efficient, since IS_ENCRYPTED()
is just a simple flag check. Prepare to remove ->is_encrypted() by
switching all callers to IS_ENCRYPTED().
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_free_filename() only needs to do a kfree() of crypto_buf.name,
which works well as an inline function. We can skip setting the various
pointers to NULL, since no user cares about it (the name is always freed
just before it goes out of scope).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Eric Biggers