window:
Group changes to the device tree. In preparation for adding device tree
overlay support, OF_DYNAMIC is reworked so that a set of device tree
changes can be prepared and applied to the tree all at once. OF_RECONFIG
notifiers see the most significant change here so that users always get
a consistent view of the tree. Notifiers generation is moved from before
a change to after it, and notifiers for a group of changes are emitted
after the entire block of changes have been applied
Automatic console selection from DT. Console drivers can now use
of_console_check() to see if the device node is specified as a console
device. If so then it gets added as a preferred console. UART devices
get this support automatically when uart_add_one_port() is called.
DT unit tests no longer depend on pre-loaded data in the device tree.
Data is loaded dynamically at the start of unit tests, and then unloaded
again when the tests have completed.
Also contains a few bugfixes for reserved regions and early memory setup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJT6M7XAAoJEMWQL496c2LNTTgP/2rXyrTTGZpK/qrLKHWKYHvr
XL7tcTkhA0OLU64E37fB+xtDXyBYnLsharuwUFSd1LlL1Wnc1cZN5ORRlMJbmjUR
Wvwl0A8/mkhGl4tzzKgJ4z4rMJXvlZfJRpnVoRB5FOn90LI7k/jsf5rIwF/6S90B
6D6II0r4RG9ku1m7g70cToxcIFCzp0V+eu2tym9GnhsyGKlunPT9iNiTpwfVhPAj
QUvMPKIQXReOv6xDU5q6E07839IMf7SdAvciBTHGnCDD7sGziHvnBIShj/2vTDAF
27sGRKrWUnnuxRUMOoIudiYyeHXIdt1WXp6FsS/ztVI37Ijh9YPShJwWGhQDppnp
4tcoSdefqw9IRUajAVWsB0RUW/tCL4a7tggWofylOA6itDi+HZnw6YafE1G1YzxF
q8OFo9uqLcmFQfHDJpk+sdtXoMZzOgrxlEscsGsQ8kd2Uoe8+chgR9EY1sqPkWVF
Zw0FJCTB6spBlsnXeboBGrnvpbPkacwhvesIFO0IANy4j4R55xlEeTcs1fe3ubUf
UhNyyFdnCAUA7e5CAabcAQYsdbEKG6v0Il3H6xts36c8lXCSFXVgNcw5mdCpFCcQ
DZ3/1FGSVzkYNXX8hlzIn1W0dqvwn4x0ZbnpXUJrGUBpSmjt9qkXx0XbdeFwartU
7X4tNGS1jfNYhOdP87jF
=8IFz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux
Pull device tree updates from Grant Likely:
"The branch contains the following device tree changes the v3.17 merge
window:
Group changes to the device tree. In preparation for adding device
tree overlay support, OF_DYNAMIC is reworked so that a set of device
tree changes can be prepared and applied to the tree all at once.
OF_RECONFIG notifiers see the most significant change here so that
users always get a consistent view of the tree. Notifiers generation
is moved from before a change to after it, and notifiers for a group
of changes are emitted after the entire block of changes have been
applied
Automatic console selection from DT. Console drivers can now use
of_console_check() to see if the device node is specified as a console
device. If so then it gets added as a preferred console. UART
devices get this support automatically when uart_add_one_port() is
called.
DT unit tests no longer depend on pre-loaded data in the device tree.
Data is loaded dynamically at the start of unit tests, and then
unloaded again when the tests have completed.
Also contains a few bugfixes for reserved regions and early memory
setup"
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
of: Fixing OF Selftest build error
drivers: of: add automated assignment of reserved regions to client devices
of: Use proper types for checking memory overflow
of: typo fix in __of_prop_dup()
Adding selftest testdata dynamically into live tree
of: Add todo tasklist for Devicetree
of: Transactional DT support.
of: Reorder device tree changes and notifiers
of: Move dynamic node fixups out of powerpc and into common code
of: Make sure attached nodes don't carry along extra children
of: Make devicetree sysfs update functions consistent.
of: Create unlocked versions of node and property add/remove functions
OF: Utility helper functions for dynamic nodes
of: Move CONFIG_OF_DYNAMIC code into a separate file
of: rename of_aliases_mutex to just of_mutex
of/platform: Fix of_platform_device_destroy iteration of devices
of: Migrate of_find_node_by_name() users to for_each_node_by_name()
tty: Update hypervisor tty drivers to use core stdout parsing code.
arm/versatile: Add the uart as the stdout device.
of: Enable console on serial ports specified by /chosen/stdout-path
...
Currently, devicetree reconfig notifiers get emitted before the change
is applied to the tree, but that behaviour is problematic if the
receiver wants the determine the new state of the tree. The current
users don't care, but the changeset code to follow will be making
multiple changes at once. Reorder notifiers to get emitted after the
change has been applied to the tree so that callbacks see the new tree
state.
At the same time, fixup the existing callbacks to expect the new order.
There are a few callbacks that compare the old and new values of a
changed property. Put both property pointers into the of_prop_reconfig
structure.
The current notifiers also allow the notifier callback to fail and
cancel the change to the tree, but that feature isn't actually used.
It really isn't valid to ignore a tree modification provided by firmware
anyway, so remove the ability to cancel a change to the tree.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Nathan Fontenot <nfont@austin.ibm.com>
References to __exit functions must be wrapped with __exit_p.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Marcelo Henrique Cerri <mhcerri@linux.vnet.ibm.com>
Cc: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)
The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The powerpc specific nx-842 compression driver does not currently
handle translating a vmalloc address to a physical address.
The current driver uses __pa() for all addresses which does not
properly handle vmalloc addresses and thus causes a failure since
we do not pass a proper physical address to the hypervisor.
This patch adds a routine to convert an address to a physical
address by checking for vmalloc addresses and handling them properly.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
---
drivers/crypto/nx/nx-842.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Each call to the co-processor, with exception of the last call, needs to
send data that is multiple of block size. As consequence, any remaining
data is kept in the internal NX context.
This patch fixes a bug in the driver that causes it to save incorrect
data into the context when data is bigger than the block size.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The NX CGM implementation doesn't support zero length messages and the
current implementation has two flaws:
- When the input data length is zero, it ignores the associated data.
- Even when both lengths are zero, it uses the Crypto API to encrypt a
zeroed block using ctr(aes) and because of this it allocates a new
transformation and sets the key for this new tfm. Both operations are
intended to be used only in user context, while the cryptographic
operations can be called in both user and softirq contexts.
This patch replaces the nested Crypto API use and adds two special
cases:
- When input data and associated data lengths are zero: it uses NX ECB
mode to emulate the encryption of a zeroed block using ctr(aes).
- When input data is zero and associated data is available: it uses NX
GMAC mode to calculate the associated data MAC.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The NX XCBC implementation doesn't support zero length messages and
because of that NX is currently returning a hard-coded hash for zero
length messages. However this approach is incorrect since the hash value
also depends on which key is used.
This patch removes the hard-coded hash and replace it with an
implementation based on the RFC 3566 using ECB.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the NX driver to perform several hyper calls when necessary
so that the length limits of scatter/gather lists are respected.
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the NX driver to perform several hyper calls when necessary
so that the length limits of scatter/gather lists are respected.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the nx-aes-gcm implementation to perform several
hyper calls if needed in order to always respect the length limits for
scatter/gather lists.
Two different limits are considered:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop":
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can have.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the nx-aes-ctr implementation to perform several
hyper calls if needed in order to always respect the length limits for
scatter/gather lists.
Two different limits are considered:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop":
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can have.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the nx-aes-cbc implementation to perform several
hyper calls if needed in order to always respect the length limits for
scatter/gather lists.
Two different limits are considered:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop":
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can have.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the nx-aes-ecb implementation to perform several
hyper calls if needed in order to always respect the length limits for
scatter/gather lists.
Two different limits are considered:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop":
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can have.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch includes one more parameter to nx_build_sg_lists() to skip
the given number of bytes from beginning of each sg list.
This is needed in order to implement the fixes for the AES modes to make
them able to process larger chunks of data.
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a bug in the nx-aes-gcm implementation.
Corrected the code so that the authtag is always verified after
decrypting and not just when there is associated data included.
Also, corrected the code to retrieve the input authtag from src
instead of dst.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The NX driver uses the transformation context to store several fields
containing data related to the state of the operations in progress.
Since a single tfm can be used by different kernel threads at the same
time, we need to protect the data stored into the context.
This patch makes use of spin locks to protect the data where a race
condition can happen.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a bug that is triggered when cts(cbc(aes)) is used with
nx-crypto driver on input larger than 32 bytes.
The chaining value from co-processor was not being saved. This value is
needed because it is used as the IV by cts(cbc(aes)).
Signed-off-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The co-processor has several limits regarding the length of
scatter/gather lists and the total number of bytes in it. These limits
are available in the device tree, as following:
- "ibm,max-sg-len": maximum number of bytes of each scatter/gather
list.
- "ibm,max-sync-cop": used for synchronous operations, it is an array
of structures that contains information regarding the limits that
must be considered for each mode and operation. The most important
limits in it are:
- The total number of bytes that a scatter/gather list can hold.
- The maximum number of elements that a scatter/gather list can
have.
This patch updates the NX driver to perform several hyper calls if
needed in order to always respect the length limits for scatter/gather
lists.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.
However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes a race on driver init with registering algorithms where the
driver status flag wasn't being set before self testing started.
Added the cra_alignmask field for CBC and ECB modes.
Fixed a bug in GCM where AES block size was being used instead of
authsize.
Removed use of blkcipher_walk routines for scatterlist processing.
Corner cases in the code prevent us from processing an entire
scatterlist at a time and walking the buffers in block sized chunks
turns out to be unecessary anyway.
Fixed off-by-one error in saving off extra data in the sha code.
Fixed accounting error for number of bytes processed in the sha code.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the notification chain for updates to the device tree
from the powerpc/pseries code to the base OF code. This makes this
functionality available to all architectures.
Additionally the notification chain is updated to allow notifications
for property add/remove/update. To make this work a pointer to a new
struct (of_prop_reconfig) is passed to the routines in the notification chain.
The of_prop_reconfig property contains a pointer to the node containing the
property and a pointer to the property itself. In the case of property
updates, the property pointer refers to the new property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull powerpc updates from Benjamin Herrenschmidt:
"Some highlights in addition to the usual batch of fixes:
- 64TB address space support for 64-bit processes by Aneesh Kumar
- Gavin Shan did a major cleanup & re-organization of our EEH support
code (IBM fancy PCI error handling & recovery infrastructure) which
paves the way for supporting different platform backends, along
with some rework of the PCIe code for the PowerNV platform in order
to remove home made resource allocations and instead use the
generic code (which is possible after some small improvements to it
done by Gavin).
- Uprobes support by Ananth N Mavinakayanahalli
- A pile of embedded updates from Freescale folks, including new SoC
and board supports, more KVM stuff including preparing for 64-bit
BookE KVM support, ePAPR 1.1 updates, etc..."
Fixup trivial conflicts in drivers/scsi/ipr.c
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
powerpc/iommu: Fix multiple issues with IOMMU pools code
powerpc: Fix VMX fix for memcpy case
driver/mtd:IFC NAND:Initialise internal SRAM before any write
powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
powerpc: Remove tlb batching hack for nighthawk
powerpc: Set paca->data_offset = 0 for boot cpu
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
powerpc/mpc85xx: Update interrupt handling for IFC controller
powerpc/85xx: Enable USB support in p1023rds_defconfig
powerpc/smp: Do not disable IPI interrupts during suspend
powerpc/eeh: Fix crash on converting OF node to edev
powerpc/eeh: Lock module while handling EEH event
powerpc/kprobe: Don't emulate store when kprobe stwu r1
powerpc/kprobe: Complete kprobe and migrate exception frame
powerpc/kprobe: Introduce a new thread flag
powerpc: Remove unused __get_user64() and __put_user64()
powerpc/eeh: Global mutex to protect PE tree
powerpc/eeh: Remove EEH PE for normal PCI hotplug
...
phys_to_abs() is a nop, don't use it.
virt_to_abs() is just a wrapper around __pa(), call __pa() directly.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
virt_to_abs() is just a wrapper around __pa(), use __pa() directly.
We should be including <asm/page.h> to get __pa(). abs_addr.h will be
removed shortly so drop that.
We were getting of.h via abs_addr.h so we need to include that directly.
Having done all that, clean up the ordering of the includes.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the driver for interacting with the 842
compression accelerator on IBM Power7+ systems.
The device is a child of the Platform Facilities Option (PFO)
and shows up as a child of the IBM VIO bus.
The compression/decompression API takes the same arguments
as existing compression methods like lzo and deflate. The 842
hardware operates on 4K hardware pages and the driver breaks up
input on 4K boundaries to submit it to the hardware accelerator.
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch creates a new submenu for the NX cryptographic
hardware accelerator and breaks the NX options into their own
Kconfig file under drivers/crypto/nx/Kconfig.
This will permit additional NX functionality to be easily
and more cleanly added in the future without touching
drivers/crypto/Makefile|Kconfig.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initialization of cra_list is currently mixed, most ciphers initialize this
field and most shashes do not. Initialization however is not needed at all
since cra_list is initialized/overwritten in __crypto_register_alg() with
list_add(). Therefore perform cleanup to remove all unneeded initializations
of this field in 'crypto/drivers/'.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-geode@lists.infradead.org
Cc: Michal Ludvig <michal@logix.cz>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Cc: Varun Wadekar <vwadekar@nvidia.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Kent Yoder <key@linux.vnet.ibm.com>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These files support configuring and building the nx device driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add debugfs files supporting the Power7+ in-Nest encryption
accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for SHA-512 hashing on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for SHA-256 hashing on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in XCBC mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in GCM mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in ECB mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in CTR mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in CCM mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add support for AES in CBC mode on the Power7+ CPU's
in-Nest accelerator driver.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These routines add the base device driver code supporting the Power7+
in-Nest encryption accelerator (nx) device.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds