When rcutorture is built in to the kernel, an earlier patch detects
that and raises the priority of RCU's kthreads to allow rcutorture's
RCU priority boosting tests to succeed.
However, if rcutorture is built as a module, those priorities must be
raised manually via the rcutree.kthread_prio kernel boot parameter.
If this manual step is not taken, rcutorture's RCU priority boosting
tests will fail due to kthread starvation. One approach would be to
raise the default priority, but that risks breaking existing users.
Another approach would be to allow runtime adjustment of RCU's kthread
priorities, but that introduces numerous "interesting" race conditions.
This patch therefore instead detects too-low priorities, and prints a
message and disables the RCU priority boosting tests in that case.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back when RCU had a debugfs interface, there was a test version and
sequence number that allowed associating debugfs data with a particular
test run, where the test run started with modprobe and ended with rmmod,
which was how tests were run back on the old ABAT system within IBM.
But rcutorture testing no longer runs on ABAT, and there is no longer an
RCU debugfs interface, so there is no longer any need for test versions
and sequence numbers.
This commit therefore removes the rcutorture_record_test_transition()
and rcutorture_record_progress() functions, and along with them the
rcutorture_testseq and rcutorture_vernum variables that they update.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current implementatation of rcu_seq_diff() follows tradition in
providing a rough-and-ready approximation of the number of elapsed grace
periods between the two rcu_seq values. However, this difference is
used to flag RCU-failure "near misses", which can be a valuable debugging
aid, so more exactitude would be an improvement. This commit therefore
improves the accuracy of rcu_seq_diff().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_seq_snap may be tricky to decipher. Lets document how it works with
an example to make it easier.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Shrink comment as suggested by Peter Zijlstra. ]
The new ->gq_seq grace-period sequence numbers must be shifted down,
which give artifacts when these numbers wrap. This commit therefore
enables rcutorture and rcuperf to handle grace-period sequence numbers
even if they do wrap. It does this by allowing a special subtraction
function to be specified, and this function subtracts before shifting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the old days of ->gpnum and ->completed, the code requesting a new
grace period checked to see if that grace period had already started,
bailing early if so. The new-age ->gp_seq approach instead checks
whether the grace period has already finished. A compensating change
pushed the requested grace period down to the bottom of the tree, thus
reducing lock contention and even eliminating it in some cases. But why
not further reduce contention, especially on large systems, by doing both,
especially given that the cost of doing both is extremely small?
This commit therefore adds a new rcu_seq_started() function that checks
whether a specified grace period has already started. It then uses
this new function in place of rcu_seq_done() in the rcu_start_this_gp()
function's funnel locking code.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq. This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves __note_gp_changes(), note_gp_changes(), and
__rcu_pending() to ->gp_seq, creating new rcu_seq_completed_gp() and
rcu_seq_new_gp() functions for this purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Reinstate "cpuend: trace as suggested by Joel Fernandes. ]
The rcutorture test invokes rcu_batches_started(),
rcu_batches_completed(), rcu_batches_started_bh(),
rcu_batches_completed_bh(), rcu_batches_started_sched(), and
rcu_batches_completed_sched() to do grace-period consistency checks,
and rcuperf uses the _completed variants for statistics.
These functions use ->gpnum and ->completed. This commit therefore
replaces them with rcu_get_gp_seq(), rcu_bh_get_gp_seq(), and
rcu_sched_get_gp_seq(), adjusting rcutorture and rcuperf to make
use of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
During expedited grace-period initialization, a work item is scheduled
for each leaf rcu_node structure. However, that initialization code
is itself (normally) executing from a workqueue, so one of the leaf
rcu_node structures could just as well be handled by that pre-existing
workqueue, and with less overhead. This commit therefore uses a
shiny new rcu_is_leaf_node() macro to execute the last leaf rcu_node
structure's initialization directly from the pre-existing workqueue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds rcu_first_leaf_node() that returns a pointer to
the first leaf rcu_node structure in the specified RCU flavor and an
rcu_is_leaf_node() that returns true iff the specified rcu_node structure
is a leaf. This commit also uses these macros where appropriate.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The latency of RCU expedited grace periods grows with increasing numbers
of CPUs, eventually failing to be all that expedited. Much of the growth
in latency is in the initialization phase, so this commit uses workqueues
to carry out this initialization concurrently on a rcu_node-by-rcu_node
basis.
This change makes use of a new rcu_par_gp_wq because flushing a work
item from another work item running from the same workqueue can result
in deadlock.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
RCU's expedited grace periods can participate in out-of-memory deadlocks
due to all available system_wq kthreads being blocked and there not being
memory available to create more. This commit prevents such deadlocks
by allocating an RCU-specific workqueue_struct at early boot time, and
providing it with a rescuer to ensure forward progress. This uses the
shiny new init_rescuer() function provided by Tejun (but indirectly).
This commit also causes SRCU to use this new RCU-specific
workqueue_struct. Note that SRCU's use of workqueues never blocks them
waiting for readers, so this should be safe from a forward-progress
viewpoint. Note that this moves SRCU from system_power_efficient_wq
to a normal workqueue. In the unlikely event that this results in
measurable degradation, a separate power-efficient workqueue will be
creates for SRCU.
Reported-by: Prateek Sood <prsood@codeaurora.org>
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
This commit reworks the first loop in sync_rcu_exp_select_cpus()
to avoid doing unnecssary stores to other CPUs' rcu_data
structures. This speeds up that first loop by roughly a factor of
two on an old x86 system. In the case where the system is mostly
idle, this loop incurs a large fraction of the overhead of the
synchronize_rcu_expedited(). There is less benefit on busy systems
because the overhead of the smp_call_function_single() in the second
loop dominates in that case.
However, it is not unusual to do configuration chances involving
RCU grace periods (both expedited and normal) while the system is
mostly idle, so this optimization is worth doing.
While we are in the area, this commit also adds parentheses to arguments
used by the for_each_leaf_node_possible_cpu() macro.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds more tracing of expedited grace periods to enable
improved debugging of slowdowns.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commits c0b334c5bf and ea9b0c8a26 introduced new sparse warnings
by accessing rcu_node->lock directly and ignoring the __private
marker. Introduce a new wrapper and use it. Also fix a similar problem
in srcutree.c introduced by a3883df393.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The kernel/rcu/rcu.h file has a pair of consecutive #ifdefs on
CONFIG_TINY_RCU, so this commit consolidates them, thus saving a few
lines of code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because the ->dynticks_nesting field now only contains the process-based
nesting level instead of a value encoding both the process nesting level
and the irq "nesting" level, we no longer need a long long, even on
32-bit systems. This commit therefore changes both the ->dynticks_nesting
and ->dynticks_nmi_nesting fields to long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that ->dynticks_nesting counts only process-level dyntick-idle
entry and exit, there is no need for the elaborate segmented counter
with its guard fields and overflow checking. This commit therefore
makes ->dynticks_nesting be a simple counter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In preparation for merging dyntick-idle irq handling into the NMI
algorithm, clamp ->dynticks_nmi_nesting value to allow for interrupts
that enter but never leave and vice versa.
It is important that the clamping happen outside of the extended quiescent
state. Otherwise, there will be short windows where irqs and NMIs fail
to convince RCU to start watching.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, RCU emits Suppress RCU CPU stall warnings during its
automatically initiated ftrace_dump() calls after detecting an error
condition, which can result in excessively excessive console output
and lost trace events. This commit therefore suppresses RCU CPU stall
warnings across any of these ftrace_dump() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, RCU allows tracing to continue when it automatically does
ftrace_dump() after detecting an error condition, which can result in
excessively large traces and lost trace events. This commit therefore
does a tracing_off() before any of these ftrace_dump() calls.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines in kernel/rcu/rcu.h by moving to single-line
definitions for trivial functions, instead of the old style where the
two curly braces each get their own line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The function srcutorture_get_gp_data() duplicated the check for
sp->batch_check0.head instead of also checking sp->batch_check1.head.
The only effect of this typo would be for rcutorture statistics to
understate the fraction of time that an SRCU grace period was in flight,
and only for Classic SRCU. This commit fixes this typo.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because raw_spin_lock_irqsave() and raw_spin_unlock_irqrestore()
both do typecheck() on their flags argument, there is no point in
duplicating this check in raw_spin_lock_irqsave_rcu_node() and
raw_spin_unlock_irqrestore_rcu_node(). This commit therefore saves
a few lines by removing this duplicated check.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves the now-generic rnp->lock wrapper macros from
kernel/rcu/tree.h to kernel/rcu/rcu.h, thus allowing SRCU to use them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_segcblist structure provides quite a bit of functionality, and
Tiny SRCU needs almost none of it. So this commit replaces Tiny SRCU's
uses of rcu_segcblist with a simple singly linked list with tail pointer.
This change significantly reduces Tiny SRCU's memory footprint, more
than making up for the growth caused by the creation of rcu_segcblist.c
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The call_srcu() docbook entry is currently in include/linux/srcu.h,
which causes needless processing for each include point. This commit
therefore moves this entry to kernel/rcu/srcutree.c, which the compiler
reads only once. In addition, the srcu_batches_completed() function is
used only within RCU and its torture-test suites. This commit therefore
also moves this function's declaration from include/linux/srcutiny.h,
include/linux/srcutree.h, and include/linux/srcuclassic.h to
kernel/rcu/rcu.h.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_request_urgent_qs_task() function is used only within RCU,
so there is no point in exporting it to the rest of the kernel from
nclude/linux/rcutiny.h and include/linux/rcutree.h. This commit therefore
moves this function to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The various functions similar to rcu_batches_started(), the
function show_rcu_gp_kthreads(), the various functions similar to
rcu_force_quiescent_state(), and the variables rcutorture_testseq and
rcutorture_vernum are used only within RCU. There is therefore no point
in exporting them to the kernel at large from include/linux/rcutiny.h
and include/linux/rcutree.h. This commit therefore moves all of these
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_ftrace_dump() function is used only internally to RCU. This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_is_nocb_cpu() function is used only internally to RCU. This
commit therefore moves its declaration from include/linux/rcupdate.h
to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU_SCHEDULER_INACTIVE, RCU_SCHEDULER_INIT, and RCU_SCHEDULER_RUNNING
definitions are used only within RCU, so this commit moves them from
include/linux/rcupdate.h to kernel/rcu/rcu.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The include/linux/rcupdate.h file contains a number of definitions that
are used only to communicate between rcutorture, rcuperf, and the RCU code
itself. There is no point in having these definitions exposed globally
throughout the kernel, so this commit moves them to kernel/rcu/rcu.h.
This change has the added benefit of shrinking rcupdate.h.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_is_normal(), rcu_gp_is_expedited(), rcu_expedite_gp(), and
rcu_unexpedite_gp() functions are intended only for use within the
RCU implementation itself -- the sysfs access is what should be used
outside of RCU. This commit therefore moves the declarations for
these functions to kernel/rcu/rcu.h, and also includes this file into
kernel/rcu/rcutorture.c and kernel/rcu/rcuperf.c. This also has the
beneficial effect of shrinking rcupdate.c a bit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Updating ->srcu_state and ->srcu_gp_seq will lead to extremely complex
race conditions given multiple callback queues, so this commit takes
advantage of the two-bit state now available in rcu_seq counters to
store the state in the bottom two bits of ->srcu_gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit increases the number of reserved bits at the bottom of an
rcu_seq grace-period counter from one to two, as will be needed to
accommodate SRCU's three-state grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The expedited grace-period code contains several open-coded shifts
know the format of an rcu_seq grace-period counter, which is not
particularly good style. This commit therefore creates a new
rcu_seq_ctr() function that extracts the counter portion of the
counter, and an rcu_seq_state() function that extracts the low-order
state bit. This commit prepares for SRCU callback parallelization,
which will require two state bits.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes the num_rcu_lvl[] array external so that SRCU can
make use of it for initializing its upcoming srcu_node tree.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves rcu_for_each_node_breadth_first(),
rcu_for_each_nonleaf_node_breadth_first(), and
rcu_for_each_leaf_node() from kernel/rcu/tree.h to
kernel/rcu/rcu.h so that SRCU can access them.
This commit is code-movement only.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves the rcu_init_levelspread() function from
kernel/rcu/tree.c to kernel/rcu/rcu.h so that SRCU can access it. This is
another step towards enabling SRCU to create its own combining tree.
This commit is code-movement only, give or take knock-on adjustments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches SRCU from custom-built callback queues to the new
rcu_segcblist structure. This change associates grace-period sequence
numbers with groups of callbacks, which will be needed for efficient
processing of per-CPU callbacks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_seq_end() function increments seq signifying completion
of a grace period, after that checks that the seq is even and wakes
_synchronize_rcu_expedited(). The _synchronize_rcu_expedited() function
uses wait_event() to wait for even seq. The problem is that wait_event()
can return as soon as seq becomes even without waiting for the wakeup.
In such case the warning in rcu_seq_end() can falsely fire if the next
expedited grace period starts before the check.
Check that seq has good value before incrementing it.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: syzkaller@googlegroups.com
Cc: linux-kernel@vger.kernel.org
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: josh@joshtriplett.org
Cc: jiangshanlai@gmail.com
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
syzkaller-triggered warning:
WARNING: CPU: 0 PID: 4832 at kernel/rcu/tree.c:3533
rcu_seq_end+0x110/0x140 kernel/rcu/tree.c:3533
CPU: 0 PID: 4832 Comm: kworker/0:3 Not tainted 4.10.0+ #276
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: events wait_rcu_exp_gp
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
panic+0x1fb/0x412 kernel/panic.c:179
__warn+0x1c4/0x1e0 kernel/panic.c:540
warn_slowpath_null+0x2c/0x40 kernel/panic.c:583
rcu_seq_end+0x110/0x140 kernel/rcu/tree.c:3533
rcu_exp_gp_seq_end kernel/rcu/tree_exp.h:36 [inline]
rcu_exp_wait_wake+0x8a9/0x1330 kernel/rcu/tree_exp.h:517
rcu_exp_sel_wait_wake kernel/rcu/tree_exp.h:559 [inline]
wait_rcu_exp_gp+0x83/0xc0 kernel/rcu/tree_exp.h:570
process_one_work+0xc06/0x1c20 kernel/workqueue.c:2096
worker_thread+0x223/0x19c0 kernel/workqueue.c:2230
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
---
This commit moves rcu_seq_start(), rcu_seq_end(), rcu_seq_snap(),
and rcu_seq_done() from kernel/rcu/tree.c to kernel/rcu/rcu.h.
This will allow SRCU to use these functions, which in turn will
allow SRCU to move from a single global callback queue to a
per-CPU callback queue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current use of "RCU_TRACE(statement);" can cause odd bugs, especially
where "statement" is a local-variable declaration, as it can leave a
misplaced ";" in the source code. This commit therefore converts these
to "RCU_TRACE(statement;)", which avoids the misplaced ";".
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current preemptible RCU implementation goes through three phases
during bootup. In the first phase, there is only one CPU that is running
with preemption disabled, so that a no-op is a synchronous grace period.
In the second mid-boot phase, the scheduler is running, but RCU has
not yet gotten its kthreads spawned (and, for expedited grace periods,
workqueues are not yet running. During this time, any attempt to do
a synchronous grace period will hang the system (or complain bitterly,
depending). In the third and final phase, RCU is fully operational and
everything works normally.
This has been OK for some time, but there has recently been some
synchronous grace periods showing up during the second mid-boot phase.
This code worked "by accident" for awhile, but started failing as soon
as expedited RCU grace periods switched over to workqueues in commit
8b355e3bc1 ("rcu: Drive expedited grace periods from workqueue").
Note that the code was buggy even before this commit, as it was subject
to failure on real-time systems that forced all expedited grace periods
to run as normal grace periods (for example, using the rcu_normal ksysfs
parameter). The callchain from the failure case is as follows:
early_amd_iommu_init()
|-> acpi_put_table(ivrs_base);
|-> acpi_tb_put_table(table_desc);
|-> acpi_tb_invalidate_table(table_desc);
|-> acpi_tb_release_table(...)
|-> acpi_os_unmap_memory
|-> acpi_os_unmap_iomem
|-> acpi_os_map_cleanup
|-> synchronize_rcu_expedited
The kernel showing this callchain was built with CONFIG_PREEMPT_RCU=y,
which caused the code to try using workqueues before they were
initialized, which did not go well.
This commit therefore reworks RCU to permit synchronous grace periods
to proceed during this mid-boot phase. This commit is therefore a
fix to a regression introduced in v4.9, and is therefore being put
forward post-merge-window in v4.10.
This commit sets a flag from the existing rcu_scheduler_starting()
function which causes all synchronous grace periods to take the expedited
path. The expedited path now checks this flag, using the requesting task
to drive the expedited grace period forward during the mid-boot phase.
Finally, this flag is updated by a core_initcall() function named
rcu_exp_runtime_mode(), which causes the runtime codepaths to be used.
Note that this arrangement assumes that tasks are not sent POSIX signals
(or anything similar) from the time that the first task is spawned
through core_initcall() time.
Fixes: 8b355e3bc1 ("rcu: Drive expedited grace periods from workqueue")
Reported-by: "Zheng, Lv" <lv.zheng@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Stan Kain <stan.kain@gmail.com>
Tested-by: Ivan <waffolz@hotmail.com>
Tested-by: Emanuel Castelo <emanuel.castelo@gmail.com>
Tested-by: Bruno Pesavento <bpesavento@infinito.it>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Frederic Bezies <fredbezies@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9.0-
Paul E. McKenney