In ll_lookup_it_finish, we need use the real parent(stripe)
FID to validate the parent UPDATE lock.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4925
Reviewed-on: http://review.whamcloud.com/10026
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Normally we know the value of op_mea1 when ll_readdir is called.
In the case of '.' or '..' op_mea1 is unknown so for that case
fetch the real parents FID.
Signed-off-by: wang di <di.wang@intel.com>
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4603
Reviewed-on: http://review.whamcloud.com/9191
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Li Xi <pkuelelixi@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the definition of OBD_OCD_VERSION() and similar macros from
lustre_idl.h to lustre_ver.h. These macros are primarily used in
comparisons to LUSTRE_VERSION_CODE which is defined in lustre_ver.h
and so should be defined there as well. Move a few definitions
(related to FIDs, quota and striping) from lustre_idl.h to
lustre_user.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5065
Reviewed-on: http://review.whamcloud.com/10336
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the page is already dirtied in ll_write_end() and kernel tries
to call balance_dirty_pages() to write back dirty pages in the same
thread, this is deadlock case if the page is already held by clio.
This can also fix the issue of LU-4873.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4977
Reviewed-on: http://review.whamcloud.com/10149
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not permitted in C++ to have a static declaration inside
of an anonymous union. The g++ compiler will complaine with an
error like this:
error: struct ost_id::<anonymous union>::ostid invalid; an
anonymous union can only have non-static data members [-fpermissive]
This patch changes the code to use an unnamed struct in place of
"struct ostid" inside of the anonymous union. That name declaration
was completely unnecessary anyway, since it was not used anywhere else.
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4987
Reviewed-on: http://review.whamcloud.com/10176
Reviewed-by: Robert Read <robert.read@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Root squash exhibits inconsistent behaviour on a client when
enabled. If a file is not cached on the client, then root will get
a permission denied error when accessing the file. When
the file has recently been accessed by a regular user and is
still in cache, root will be able to access the file without error
because the permission check is only done by the client that
isn't aware of root squash.
While the only real security benefit from root squash is to deny
clients access to files owned by root itself, it also makes sense
to treat file access on the client in a consistent manner
regardless of whether the file is in cache or not.
This patch adds root squash settings to llite so that client is able
to apply root squashing when it is relevant.
Configuration of MDT root squash settings will automatically be
applied to llite config log as well.
Update cfs_str2num_check() routine by removing any modification
of the specified string parameter. Since string can come from ls_str
field of a lstr structure, this avoids inconsistent ls_len field.
Signed-off-by: Gregoire Pichon <gregoire.pichon@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1778
Reviewed-on: http://review.whamcloud.com/5700
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ll_prep_md_op_data() validate names according to the same formula
used in mdd_name_check(). Add mdc_pack_name() to validate the name
actually packed in the request.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4992
Reviewed-on: http://review.whamcloud.com/10198
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate master stripe with master object, so
1. stripeEA only exists on master object.
2. sub-stripe object will be inserted into master object
as sub-directory, and it can get the master object by "..".
By this, it will remove those specilities for stripe0 in
LMV and LOD. And also simplify LFSCK, i.e. consistency check
would be easier.
When then master object becomes an orphan, we should
mark all of its sub-stripes as dead object as well,
otherwise client might still be able to create files
under these stripes.
A few fixes for striped directory layout lock:
1. stripe 0 should be locked as EX, same as other stripes.
2. Acquire the layout for directory, when it is being unliked.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4690
Reviewed-on: http://review.whamcloud.com/9511
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When determining whether an early reply can be sent the server will
calculate the new deadline based on an offset from the request
arrival time. However, when actually setting the new deadline
the server offsets the current time. This can result in deadlines
being extended more than at_max seconds past the request arrival
time. Instead, the server should offset the arrival time when updating
its request timeout.
When a client receives an early reply it doesn't know the server side
arrival time so we use the original sent time as an approximation.
Signed-off-by: Chris Horn <hornc@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4578
Reviewed-on: http://review.whamcloud.com/9100
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Christopher J. Morrone <chris.morrone.llnl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add error handler during inode inialization, so inode will
become bad inode if something bad happens during inode prepare
phase, otherwise the striped directory will not get its layout
and being mis-regarded as normal directory.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4930
Reviewed-on: http://review.whamcloud.com/10170
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move ioctl definitions and related functions from lustre_dlm.h,
lustre_lib.h, obd.h, to lustre_ioctl.h. Replace the definitions of
retired ioctls with comment.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4961
Reviewed-on: http://review.whamcloud.com/10139
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Robert Read <robert.read@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move checks for FAILED, DESTROYED flags under ldlm spinlock,
destroy flock atomically with the check it is not destroyed yet.
Do not put the granted flock into the resource if this is
UNLOCK, TEST, or DEADLOCK'ed flock.
Later a regression for this patch was reported under LU-7626.
The refcount nonzero (1) after lock cleanup errors was reported.
The reason is that the case LCK_NL was not handled for obdecho.
Patch 17791 resolved this issue which has been combined into
this upstream patch.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Signed-off-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2177
Reviewed-by: Alexey Lyashkov <alexey_lyashkov@xyratex.com>
Reviewed-by: Andriy Skulysh <andriy_skulysh@xyratex.com>
Reviewed-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Xyratex-bug-id: MRP-1588
Reviewed-on: http://review.whamcloud.com/10005
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7626
Reviewed-by: Mirza Arshad Mirza Hussain <arshad.hussain@seagate.com>
Reviewed-by: Alexey Leonidovich Lyashkov <alexey.lyashkov@seagate.com>
Reviewed-on: http://review.whamcloud.com/17791
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since all the LOV_MAGIC_* definitions have the same
postfix values break that value out into its own
definition. With this we can check whether the magic's
postfix match the LOV_MAGIC_MAGIC or not: if yes,
then it is quite possible that the clients has
encountered an newer LOV magic. This extra information
can let us handle those cases more gracefully.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4941
Reviewed-on: http://review.whamcloud.com/10045
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify the flow control interfaces for MDC RPC and FLD RPC.
We allow to adjust the maximum inflight RPCs count via /sys
interface.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4687
Reviewed-on: http://review.whamcloud.com/9562
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lmv_getattr_name() don't return a freed request in the error path.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4826
Reviewed-on: http://review.whamcloud.com/9863
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calculate the end of current stripe correctly when the stripe size
is not power 2.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4860
Reviewed-on: http://review.whamcloud.com/9882
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a partial page write, it will have to issue a READ RPC firstly
to get a full uptodate page. If another page is already locked by
this thread it can easily cause deadlock.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4873
Reviewed-on: http://review.whamcloud.com/9928
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure there aren't invalid pointers hanging around after
ptlrpc_req_finished is called.
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4826
Reviewed-on: http://review.whamcloud.com/9841
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If remote object is being found in a migrating directory,
it should continue to lookup the object in remote MDT,
instead of return.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4805
Reviewed-on: http://review.whamcloud.com/9806
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By the time that a struct lmv_user_md reaches lmv_placement_policy()
it has already been converted to little endian. Therefore use the
appropriate macros around accesses to this this field. This issue was
found by rewriting the definition of struct lmv_user_md to use the
__leXX typedefs and running sparse.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4738
Reviewed-on: http://review.whamcloud.com/9671
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Swapnil Pimpale <spimpale@ddn.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several inline functions return a structure that was passed in.
Their is no need for this so just make these function void.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/8641
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the return type of several predicate functions from int to bool.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/8641
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a const qualifier wherever possible to the pointer parameters of
the inline helper functions in lustre_idl.h and lustre_fid.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/8641
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the const for the __u64 parameters for inline functions
in lustre_idl.h.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/8641
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mdc_ioc_swap_layouts() cancel *any* unused locks with LAYOUT or
XATTR IBITS set on the two files. (This matches the locks acquired in
mdt_swap_layouts(). Previously only locks that conflicted with a CR
LAYOUT lock were cancelled.)
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4320
Reviewed-on: http://review.whamcloud.com/9329
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Clear the client dentry cache before migrating file/directory
to the remote MDT.
2. Do not return stripe information to client, if it did not get
the layout lock.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4682
Reviewed-on: http://review.whamcloud.com/9522
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes the rq_commit_cb of BRW RPC can be called twice if that RPC
has already committed at reply time. This will cause inaccuracy of
unstable pages accounting and then assertion.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3274
Reviewed-on: http://review.whamcloud.com/8215
Reviewed-by: Prakash Surya <surya1@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This enables the client to inject an error by altering
the parent FID in order to test if the server side file
system checker behaves properly.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3951
Reviewed-on: http://review.whamcloud.com/7667
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the log file name contains the current time in seconds, dumping
the logs more than once per second causes EEXIST errors to be emitted.
Add a static variable to libcfs_debug_dumplog_internal that records
the time of the last Lustre log dump. If the current time in seconds
is equal to the last time, do not dump logs again.
Note that this is not thread-safe. However, in the rare case that two
threads try to access last_dump_time simultaneously, the worst thing
that could happen is that one of the threads will get an EEXIST error
when trying to write the log file. This is no worse than the current
situation, and it is not likely to happen.
Signed-off-by: Ryan Haasken <haasken@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4129
Reviewed-on: http://review.whamcloud.com/8964
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'plock.cookie' might be used uninitialized in this function.
sscanf format specification '%d' expects type 'int *' for 'd',
but parameter 3 has a different type '__u32*'
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9390
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add client support to migrate the individual inodes
from one MDT to another MDT, and this functionality
will only migrate inode layout on MDT but not touch
data object on OST.
The directory will be migrated from top to the bottom,
i.e. migrating parent first, then migrating the child.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2430
Reviewed-on: http://review.whamcloud.com/6662
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was no protection when inc/dec lu_device_type::ldt_device_nr,
which may caused the ldt_device_nr to be wrong and trigger assert.
This patch redefine lu_device_type::ldt_device_nr as atomic type.
There was no protection when add/del lu_device_type::ldt_linkage
into/from the global lu_device_types list, which may caused bad
address accessing. This patch uses the existing obd_types_lock
to protect related operations.
We do NOT need lu_types_stop() any longer. Such function scans
the global lu_device_types list, and for each type item on it
which has zerod lu_device_type::ldt_device_nr, call its stop()
method. In fact, the lu_device_type::ldt_device_nr only will be
zero when the last lu_device_fini() is called, and at that time,
inside the lu_device_fini(), its stop() method will be called.
So it is unnecessary to call the stop() again via lu_types_stop().
Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4604
Reviewed-on: http://review.whamcloud.com/8694
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch handles the upgrade situation that old mountdata already
contains comma-separated NIDs. The correct way to fix the original
issue is to parse comma-separated NIDs in lmd_parse().
Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4460
Reviewed-on: http://review.whamcloud.com/8918
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add delete striped directory, it includes
1. enable sync log between MDTs, so slave objects will
be delete by unlink log, which is similar as deleting ost
object.
2. retrieve layout information of striped directory on MDT,
then lock all of the slave objects before unlink.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-on: http://review.whamcloud.com/7445
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix "lfs getdirstripe", so it can show layout information
of striped directory
[root@testnode tests]# ../utils/lfs getdirstripe /mnt/lustre/test1
/mnt/lustre/test1
lmv_stripe_count: 2
lmv_stripe_offset: 0
mdtidx FID[seq:oid:ver]
0 [0x280000400:0x1:0x0]
1 [0x2c0000400:0x1:0x0]
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-on: http://review.whamcloud.com/7228
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. client send create request to the master MDT, which
will allocate FIDs and create slaves. for all of slaves.
2. Client needs to revalidate slaves during intent getattr
and open request.
3. lmv_stripe_md will include attributes(size, nlink etc)
from all of stripe, which will be protected by UPDATE lock.
client needs to merge these attributes when update inode.
4. send create request to the MDT where the file is located,
which can help creating master stripe of striped directory.
Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3529
Reviewed-on: http://review.whamcloud.com/7196
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use lmv_free_memmd for proper cleanup instead of
the generic obd_free_memmd.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Completely replace lmv_get_easize with lmv_mds_md_size.
With this change we can delete lmv_get_easize.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lmv_[un]pack_md function are used to calculate the
size of the data used to represent the LMV striping data.
The original code was straight forward in its calculate
with lmv_get_easize since only one type of data format
could exist. We want to be able to support different
version of this data in the future so this patch moves
to generating the size of the data using the stripe count
and which LMV_MAGIC_* version.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MAX_HASH_* macros already exist in obd.h. Remove
the duplicated defines in lustre_idl.h.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function lmv_get_mea() is not used so remove it.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the operation is IT_READDIR don't need to handle the
mdc RPC lock.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the 3rd parameter remove to a bool for ll_release_page
function.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a inode parameter to ll_release_page. This will be
used in the future.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Group function prototypes together related to dir.c. Move
ll_release_page to be with function declarations.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove comment about fixing swabbing that is not needed.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass in struct md_op_data for ll_get_dir_page function.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CHECK: Alignment should match open parenthesis
Signed-off-by: Johanna Abrahamsson <johanna@mjao.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
wang di