Pull the RST line low then high when initializing the driver,
in order to force a reset of the chip.
Previously, the line was not pulled low, which could result in
the chip registers not resetting to their default values on boot.
Signed-off-by: Mike Willard <mwillard@izotope.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Medion E1239T uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like other models following Intel's Brasswell's reference design.
This commit adds a DMI quirk pointing to the intel_braswell_platform_data
for this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185257.3355-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If I2C is n but SoundWire is m, building fails:
sound/soc/codecs/rt5682.c:3716:1: warning: data definition has no type or storage class
module_i2c_driver(rt5682_i2c_driver);
^~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5682.c:3716:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
sound/soc/codecs/rt5682.c:3716:1: warning: parameter names (without types) in function declaration
Guard this use #ifdef CONFIG_I2C.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200401091055.34112-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire mode doesn't need the DAI clocks.
Therefore, the DAI clock registry moves to I2S mode case.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DAI was configured with a set_tdm_slots() call, use the information.
A platform or machine driver may configure each amplifier to extract
different bitSlots from the frame, or extract the same data and use
processing to generate the relevant output. The latter case is easier
to handle in case of orientation changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325212905.28145-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8974.c:200:38: warning:
wm8974_aux_boost_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/wm8974.c:204:38: warning:
wm8974_mic_boost_controls defined but not used [-Wunused-const-variable=]
commit 8a123ee2a4 ("ASoC: WM8974 DAPM cleanups")
left behind this, remove them.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200324070615.16248-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the tas2562 datasheet,the bits[5:1] represents the amp_level value.
So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi <charlie.jh@kakaocorp.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200319140043.GA6688@jhbirdchoi-MS-7B79
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:
sound/soc/codecs/mt6660.c: 1:36 Invalid token: //
Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200321114022.8545-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.
In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.
Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.
Changes since v1:
- removed false error check while setting sruntime.
Srinivas Kandagatla (2):
ASoC: qcom: sdm845: handle soundwire stream
ASoC: codecs: wsa881x: remove soundwire stream handling
sound/soc/codecs/wsa881x.c | 44 +------------------------
sound/soc/qcom/Kconfig | 2 +-
sound/soc/qcom/sdm845.c | 67 ++++++++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 44 deletions(-)
--
2.21.0
There could be multiple instances of this codec on any platform,
so handling stream directly in this codec driver can lead to
multiple calls to prepare/enable/disable on the same SoundWire stream.
Move this stream handling to machine driver to fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200317151233.8763-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The cycle time of FIFO clock should increase 2 times to avoid
the random recording noise issue.
This setting could apply to all known situations in i2s mode.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073308.11572-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position.
Use scnprintf() instead for fixing such potential errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Gcc reports the following warnings:
sound/soc/codecs/rt5682-sdw.c:286:12: warning: 'rt5682_dev_resume'
defined but not used [-Wunused-function]
static int rt5682_dev_resume(struct device *dev)
^~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5682-sdw.c:273:12: warning: 'rt5682_dev_suspend'
defined but not used [-Wunused-function]
static int rt5682_dev_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~
Fix by adding maybe_unused as done for other SoundWire codecs
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 code can be used in I2C or SoundWire mode. When I2C is not
selected, we have the following issue:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] &&
I2C [=n]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=m] && !UML && SND [=m] &&
SND_SOC [=m] && SOUNDWIRE [=m]
Fix by adding SOUNDWIRE as a dependency.
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5iebkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MR4B/wJq8zrpsPAA2jCoBfN0qMzrVBEt9QD
5oF/r36ZH5G6x0QZzyiwVOUbapNT1TVs51tw0S5esxJ+npkT2kgABPlIMYF2tgp6
rmLOaFEPC+Bgf/dNGIWLV21B+EZCHDxTz1zD7VjfaXLDPRop+sZg1VfXLR7IvXos
1VQLVx1y6vFJRr56EU5xQo1CAeFGB1x5K52aF4D90ALL7lYT6dt7m/soBmxImEpq
aZUCE6xwX8WMH4OX6sTfqOvB+g6q+DzshCP2+Fas/0OIQZQA9mmIKId+/xpb6QcY
A0AzMlSv49uAsBsa3CZmSingGVqL/PEMkCI4wvJPl/paQXUsMi9HYV0E
=YlPP
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.6-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.6
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
slimbus addresses are 16 bit wide, masking page numbers
to wcd register at offset of 12 will limit the number for pages.
So it becomes impossible to write to page 0x10 registers.
Remove masking 0x800 (slimbus address range) from register address
and making use of window parameters in regmap config should fix it
and also will represent the registers exactly inline with Datasheet.
Remove this unnessary masking and make the registers be inline
with datasheet.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like there are some unused headers, remove them.
Seems to be missed while moving to mfd.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306132806.19684-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the range verification check for the mic_bias and vref device tree
entries.
Fixes 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200304193427.16886-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver should set ops in rt1015_dai driver.
Also make the two variable static to fix sparse warnings.
Fixes: df31007400 ("ASoC: rt1015: add rt1015 amplifier driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200302070522.48104-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warning:
sound/soc/codecs/rt5682-sdw.c:163:5: warning:
symbol 'rt5682_clock_config' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200228075609.38236-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2563 is register compatible with the TAS2562. The main
difference is the TAS2563 has a programmable DSP to manage different
audio profiles.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200226130305.12043-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On i386 randconfig:
sound/soc/codecs/wm9705.o: In function `wm9705_soc_resume':
wm9705.c:(.text+0x128): undefined reference to `snd_ac97_reset'
sound/soc/codecs/wm9712.o: In function `wm9712_soc_resume':
wm9712.c:(.text+0x2d1): undefined reference to `snd_ac97_reset'
sound/soc/codecs/wm9713.o: In function `wm9713_soc_resume':
wm9713.c:(.text+0x820): undefined reference to `snd_ac97_reset'
Fix this by adding the missing dependencies on SND_SOC_AC97_BUS.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200224112537.14483-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add decimation filter selection support.
Per Section 8.3.6.7 the Digital Decimation Filter is selectable between
a Linear Phase, Low Latency, and Ultra Low Latency filer.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221181358.22526-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320ADCx140 parts support Dynamic Range Enhancer (DRE) as defined
in Section 8.3.2 of the data sheets.
The DRE achieves a complete-channel dynamic range as high as 120 dB.
At a system level, the DRE scheme enables far-field, high-fidelity recording
of audio signals in very quiet environments and low-distortion recording in
loud environments.
There are 2 enables for DRE. The first is a global setting that enables
the DRE engine in the device and the other enable is per channel. If
the DRE is enabled globally then either DRE or AGC can be used per each
configured channel. If global DRE is disabled then even setting the DRE
enable bit in the channel config register will have no effect.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221181358.22526-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>