use mm.h definition
Cc: David Airlie <airlied@linux.ie>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
align_pitch() uses ALIGN() to ensure the pitch is aligned to SGX's
requirement of 8 pixels. However, ALIGN() expects the alignment value to
be a power of two, which is not the case for 24 bits per pixels.
Use roundup() instead, which works for all alignments.
This fixes the error seen with 24 bits per pixel modes:
"buffer pitch (2176 bytes) is not a multiple of pixel size (3 bytes)"
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
If tiler_unpin() call in omap_gem_put_paddr() fails,
omap_gem_put_paddr() will immediately stop processing and return an
error.
This patch remoes that error checking, and also removes
omap_gem_put_paddr()'s return value, because:
* The caller of omap_gem_put_paddr() can do nothing if an error
happens, so it's pointless to return an error value
* If tiler_unpin() fails, the GEM object will possibly be left in an
undefined state, where the DMM mapping may have been removed, but the
GEM object still thinks everything is as it should be, leading to
crashes later.
* There's no point in returning an error from a "free" call, as the
caller can do nothing about it. So it's better to clean up as much as
possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_framebuffer_unpin() check the return value of omap_gem_put_paddr()
and return immediately if omap_gem_put_paddr() fails.
This patch removes the check for the return value, and also removes the
return value of omap_framebuffer_unpin(), because:
* Nothing checks the return value of omap_framebuffer_unpin(), and even
something did check it, there's nothing the caller can do to handle
the error.
* If a omap_gem_put_paddr() fails, the framebuffer's other planes will
be left unreleased. So it's better to call omap_gem_put_paddr() for
all the planes, even if one would fail.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The DMM driver uses a timeout of 1 ms to wait for DMM transaction to
finish. While DMM should always finish the operation within that time,
the timeout is rather strict. Small misbehavior of the system (e.g. an
irq taking too long) could trigger the timeout.
As the DMM is a critical piece of code for display memory management,
let's increase the timeout to 100 ms so that we are less likely to fail
a memory allocation in case of system misbehaviors. 100 ms is just a
guess of a reasonably large timeout. The HW should accomplish the task
in less than 1 ms.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DRM allows planes to be partially off-screen, but DSS hardware does not.
This patch adds the necessary check to reject plane configs if the plane
is not fully inside the crtc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
On a platform with no TILER (e.g. omap3, am43xx), when the user wants to
allocate buffer with flag OMAP_BO_SCANOUT, the buffer needs to be
allocated with dma_alloc_writecombine. For some reason the driver does
not return an error if that alloc fails, instead it continues without
backing memory. This leads to errors later when the user tries to use
the buffer.
This patch makes the driver return an error if dma_alloc_writecombine
fails.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Rework the crtc event/flip_wait system as follows:
- If we enable a crtc (full modeset), we set omap_crtc->pending and
register vblank irq.
- If we need to set GO bit (page flip), we do the same but also set the
GO bit.
- On vblank we unregister the irq, clear the 'pending' flag, send vblank
event to userspace if crtc->state->event != NULL, and wake up
'pending_wait' wq.
- In omap_atomic_complete() we wait for the 'pending' flag to get reset
for all enabled crtcs using 'pending_wait' wq.
The above ensures that we send the events to userspace in vblank, and
that after the wait in omap_atomic_complete() everything for the
affected crtcs has been completed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_crtc_atomic_flush() is the only user of omap_crtc_flush(), so just
move the code from omap_crtc_flush() to omap_crtc_atomic_flush().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Before atomic modesetting omap_framebuffer_pin() and
omap_framebuffer_unpin() were always called with modesetting locks
taken. With atomic modesetting support this is no longer the case, and
we need locking to protect the pin_count and the paddr, as multiple
threads may pin the same fb concurrently.
This patch adds a mutex to struct omap_framebuffer, and uses it in
omap_framebuffer_pin() and omap_framebuffer_unpin().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omap_plane_atomic_update() calls dispc_ovl_setup(), which can fail (but
shouldn't). To make the code a bit more robust, make sure the plane gets
disabled if dispc_ovl_setup() fails, as otherwise we might get illegal
HW configuration leading to error interrupts.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
At the moment we have omap_plane_setup() function which handles both
enabling (and configuring) and disabling the plane. With atomic
modesetting we have separate hooks for plane enable/config and disable.
This patch moves the code from omap_plane_setup() to
omap_plane_atomic_update() and omap_plane_atomic_disable().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
With atomic modesetting, omap_plane_setup()'s return value is ignored as
the functions using it cannot fail. dispc_ovl_setup(), called by
omap_plane_setup(), can fail (but shouldn't).
Instead of returning an error from omap_plane_setup() which gets
ignored, return void and use WARN if dispc_ovl_setup() fails.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Planes setup is handled by the DRM core through the atomic helpers,
there's no need to duplicate the code in the CRTC .enable() and
.disable() operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtc_flush() call in omap_crtc_enable() and omap_crtc_disable()
is a no-op, as the display manager is always disabled at this point. Just
remove the function call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Now that the driver is fully converted to atomic operations, and that
the atomic helpers call the operations in the right order, we can move
encoder setup to where it belongs, in the encoder operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Instead of sprinkling dispc_runtime_get() and dispc_runtime_put() calls
in various CRTC operations, move all power management code to the atomic
commit function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtc_encoder_setup() function is always called with the DSS
enabled. Remove the dispc_runtime_get() and dispc_runtime_put() calls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DRM page flip vblank events requested by page flips or atomic commits
are created by the DRM core and then passed to driver through CRTC
states (for atomic commit) or directly to the page flip handler (for
legacy page flips). The events are then kept aside until the page flip
completes, at which point drivers queue them for delivery with a call to
drm_send_vblank_event().
When a DRM file handle is closed events pending for delivery are cleaned
up automatically by the DRM core. Events that have been passed to the
driver but haven't completed yet, however, are not handled by the DRM
core. Drivers are responsible for destroying them and must not attempt
to queue them for delivery. This is usually handled by drivers'
preclose() handlers that cancel and destroy page flip events that
reference the file handle being closed.
With asynchronous atomic updates the story becomes more complex. Several
asynchronous atomic updates can be pending, each of them carrying
per-CRTC events. As the atomic_commit() operation doesn't receive a file
handle context, drivers can't know which file handle a pending update
refers to, making it difficult to cancel or wait for completion of
updates related to the file handle being closed.
It should be noted that cancelling page flips or waiting for atomic
updates completion isn't required by the DRM core when closing a file
handle. The only requirement is that no event gets queued for delivery
after the preclose() operation returns. This can easily be achieved by
storing events for atomic commits in a list, unlinking events from the
file handle being closed by setting the file_priv field to NULL, and
skipping delivery of unlinked events.
This logic replaces the page flip cancellation completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When performing asynchronous atomic updates the modeset lock isn't taken
around the callers of omap_crtc_flush(). This isn't an issue though, as
access to the CRTC is properly serialized. Just drop the warning.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtc_flush() function is always called with a reference to the
dispc held. Remove unnecessary calls to dispc_runtime_get() and
dispc_runtime_put().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function isn't used outside of its compilation unit, make it static.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The field tracks the plane state to avoid double-enable or -disable.
This isn't required anymore, as
- the DRM atomic core guarantees that the plane atomic_update and
atomic_disable functions will never be called on an enabled/disabled
plane
- the CRTC enable/disable operations that enable/disable the plane are
already guarded against double enable/disable
We can thus remove the enabled field completely. The
omap_plane_set_enable() function then becomes a wrapper around
omap_plane_setup() which can be called directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The field tracks the CRTC state to avoid double-enable or -disable. As
the DRM atomic core guarantees that the CRTC enable and disable
functions won't be called on an already enabled or disabled CRTC, such
tracking isn't needed. Remove the enabled field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The crtc info structure is only used to setup the crtc through the DSS
API. Move it from the crtc structure to local variables in
omap_crtc_dss_enable().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The plane info and win structures are only used to setup the plane
through the DSS API. Move them from the plane structure to local
variables in omap_plane_setup().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Allow setting up plane properties atomically using the plane
set_property atomic helper. The properties are now stored in the plane
state (requiring subclassing it) and applied when updating the planes.
The CRTC exposes the properties of its primary plane for legacy reason.
We can't get rid of that API, so simply delegate it to the primary
plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Since the removal of omap_plane_mode_set(), framebuffers are now pinned
exclusively through the plane .prepare_fb() and .cleanup_fb() operations
as the remaining callers of omap_plane_setup() don't modify the
framebuffer. Remove the manual pin/unpin infrastructure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The atomic page flip helper implements the page flip operation using
asynchronous commits.
As the legacy page flip was the last caller of omap_plane_mode_set(),
remove the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Implement a custom .atomic_commit() handler that supports asynchronous
commits using a work queue. This can be used for userspace-driven
asynchronous commits, as well as for an atomic page flip implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The encoder .mode_fixup() operation is legacy, atomic updates uses the
new .atomic_check() operation. Convert the encoder driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The atomic connector DPMS helper implements the connector DPMS operation
using atomic commit, removing the need for DPMS helper operations on
CRTCs and encoders.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This removes the legacy mode config code. The CRTC and encoder prepare
and commit operations are not used anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This removes the legacy plane update code. Wire up the default atomic
check and atomic commit mode config helpers as needed by the plane
update atomic helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the new CRTC atomic transitional helpers drm_helper_crtc_mode_set()
and drm_helper_crtc_mode_set_base() to implement the CRTC .mode_set and
.mode_set_base operations. This delegates primary plane configuration to
the plane .atomic_update and .atomic_disable operations, removing
duplicate code from the CRTC implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Implement the CRTC .atomic_begin() and .atomic_flush() operations, the
plane .atomic_check(), .atomic_update() and operations, and use the
transitional atomic helpers to implement the plane update and disable
operations on top of the new atomic operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Hook up the default .reset(), .atomic_duplicate_state() and
.atomic_free_state() helpers to ensure that state objects are properly
created and destroyed, and call drm_mode_config_reset() at init time to
create the initial state objects.
Framebuffer reference count also gets maintained automatically by the
transitional helpers except for the legacy page flip operation. Maintain
it explicitly there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The operations are required by the atomic helpers, implement them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When using atomic updates the CRTC .enable() and .disable() helper
operations are preferred over the (then legacy) .prepare() and .commit()
operations. Implement .enable() and rework .disable() to not depend on
DPMS, easing DPMS removal later on.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omap_crtc_enable() and omap_crtc_disable() DSS operations functions
will clash with the new CRTC enable and disable helpers. Rename them to
omap_crtc_dss_*, as well as the other DSS operations for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Use the <...> include style instead of "..." for DRM headers and sort
the headers alphabetically to ease detection of duplicates.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We can't rely on crtc->primary->fb in the page flip worker, as a racing
CRTC disable (due for instance to an explicit framebuffer deletion from
userspace) would set that field to NULL before the worker gets a change
to run. Store the framebuffer queued for page flip in a new field of
omap_crtc instead, and hold a reference to it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM core vblank handling mechanism requires drivers to forcefully
turn vblank reporting off when disabling the CRTC, and to restore the
vblank reporting status when enabling the CRTC.
Implement this using the drm_crtc_vblank_on/off helpers. When disabling
vblank we must first wait for page flips to complete, so implement page
flip completion wait as well.
Finally, drm_crtc_vblank_off() must be called at startup to synchronize
the state of the vblank core code with the hardware, which is initially
disabled. An interesting side effect is that the .disable_vblank()
operation will now be called for the first time with the CRTC disabled
and the DISPC runtime suspended. The dispc_runtime_get() call in
.disable_vblank() is supposed to take care of that, but the operation is
called with a spinlock held, which prevents it from sleeping.
To fix that move DISPC runtime PM handling out of the vblank operations
to the CRTC code, ensuring that the display controller will always be
powered when enabling or disabling vblank interrupts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To implement proper vblank control the driver will need to wait for page
flip completion before disabling the vblank interrupt. This is made
complex by the page flip implementation which queues and submits page
flips to the hardware in two separate steps between which DRM locks are
released. We thus need to avoid waiting on a page flip that has been
queued but not submitted as submission and wait are covered by the same
lock.
Rework page flip handling as a first step by splitting the flip_pending
boolean variable into an enumerated state and moving between states
based on flip queue, submission and completion. The CANCELLED state will
be used in a second step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Pending page flips must be cancelled when closing the device, otherwise
their completion at next vblank will result in nasty effects, including
possible oopses due to resources required to complete the page flip
being freed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm can't use drm_irq_install() and drm_irq_uninstall() as it
delegates IRQ handling to the omapdss driver. However, the code still
declares IRQ-related operations used by the DRM IRQ helpers, and calls
them indirectly.
Simplify the implementation by calling the functions directly or
inlining them. The irq_enabled checks can then also be simplified as
the call stacks guarantees that omap_drm_irq_install() and
omap_drm_irq_uninstall() will never run concurrently.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The old_fb field is only used to indicate whether a page flip is
pending. Turn it into a bool named flip_pending. Rename event and
page_flip_work to flip_event and flip_work for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The operation is called page_flip, rename its implementation
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm driver implements a mechanism to apply new settings (due to
plane update, plane disable, plane property set, CRTC mode set or CRTC
DPMS) asynchronously. While this improves performance, it adds a level
of complexity that makes transition to the atomic update API close to
impossible. Furthermore the atomic update API requires part of the apply
operations to be synchronous (such as pinning the framebuffers), so the
current implementation needs to be changed.
Simplify the CRTC and plane code by making updates synchronous to
prepare for the switch to the atomic update API. Asynchronous update
will be implemented in a second step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Rotation is a standard property, store it in
dev->mode_config.rotation_property. While at it, extract the properties
initialization code to a separate function instead of running it for
every plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fabian Frederick