Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917eb ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
Add support for the CDTech Electronics displays S070PWS19HP-FC21
(7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple.
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-4-matthias.schiffer@ew.tq-group.com
The DRM panel bridge core requires connector type to be set up properly,
otherwise it rejects the panel. The missing connector type problem popped
up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in
order to test whether panel's rotation property work properly using
panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses
CLAA070WP03XG display panel.
The NVIDIA Tegra DRM driver recently gained DRM bridges support for the
RGB output and now driver wraps directly-connected panels into DRM bridge.
Hence all panels should have connector type set properly now, otherwise
the panel's wrapping fails.
This patch adds missing connector types for the LVDS panels that are found
on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. EDT ET057090DHU
6. Innolux N156BGE L21
7. Samsung LTN101NT05
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617222703.17080-8-digetx@gmail.com
It's not necessary to unregister backlight device which
registered with devm_backlight_device_register().
Fixes: 12a6cbd4f3 ("drm/panel: otm8009a: Use new backlight API")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618134650.44311-1-weiyongjun1@huawei.com
This patch adds support for Kaohsiung Opto-Electronics Inc.
10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface.
The panel has dual LVDS channels.
My panel is manufactured by US Micro Products(USMP). There is a tag at
the back of the panel, which indicates the panel type is 'TX26D202VM0BWA'
and it's made by KOE in Taiwan.
The panel spec from USMP can be found at:
https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf
The below panel spec from KOE is basically the same to the one from USMP.
However, the panel type 'TX26D202VM0BAA' is a little bit different.
It looks that the two types of panel are compatible with each other.
http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1590991880-24273-1-git-send-email-victor.liu@nxp.com
None of the DSI panels set the connector_type in their panel_desc
descriptor. As they are all guaranteed to be DSI panels, that's an easy
fix, set the connector type to DRM_MODE_CONNECTOR_DSI.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602171240.2785-1-laurent.pinchart+renesas@ideasonboard.com
People use panel-simple when they have panels that are builtin to
their device. In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing. Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.
Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us. In some system designs the right place for
this is panel-simple.
When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO. The case this was designed for was for the "ti-sn65dsi86"
bridge chip. If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER. Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe. NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61. However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62". We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid
The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:
math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92
Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area". Let's fix
it.
Also the Internet says that this panel supports 262K colors. That's
6bpp, not 8bpp.
Fixes: b0c664cc80 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.
This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com
fix boe_tv105wum_nw0 display shift.
Signed-off-by: David Lu <david.lu@bitland.com.cn>
Fixes: 963518c124 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel")
Cc: David Lu <david.lu@bitland.com.cn>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as
indicated by the current bus_format.
Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the
connector_type to LVDS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[updated patch subject]
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com
drivers/gpu/drm/panel/panel-truly-nt35597.c:493:31: warning: variable ‘config’ set but not used [-Wunused-but-set-variable]
const struct nt35597_config *config;
^~~~~~
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417101401.19388-1-yuehaibing@huawei.com
The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.
They differ in their init sequence and mode details.
changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com
Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
The KR070PE2T is a 7" panel with a resolution of 800x480.
KR070PE2T is the marking present on the ribbon cable. As this panel is
probably available under different brands, this marking will catch
most devices.
As I can't find a datasheet for this panel, the bus_flags are instead
from trial-and-error. The flags seem to be common for these kind of
panels as well.
Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320112205.7100-3-dev@pascalroeleven.nl
The "data-mapping" property may not be the best way to describe the
interface between panels and display interfaces.
Drop use of in the panel-simple driver, so we have time to find
the right way to describe this interface.
Fixes: 4a1d0dbc83 ("drm/panel: simple: add panel-dpi support")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-3-sam@ravnborg.org
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com
Reviewed-by: Adam Ford <aford173@gmail.com>
The currently listed dotclocks disagree with the currently
listed vrefresh rates. Change the dotclocks to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-9-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
Someone tell me which (if either) of the dotclock or vreresh is
correct?
Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com
Reviewed-by: Heiko Schocher <hs@denx.de>
The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.
There are two variants of the COM37H3M panel.
The older one's COM37H3M05DTC data sheet specifies:
MIN TYP MAX
CLK frequency fCLK -- 22.4 26.3 MHz (in VGA mode)
VSYNC Frequency fVSYNC 54 60 66 Hz
VSYNC cycle time tv -- 650 -- H
HSYNC frequency fHSYNC -- 39.3 -- kHz
HSYNC cycle time th -- 570 -- CLK
The newer one's COM37H3M99DTC data sheet says:
MIN TYP MAX
CLK frequency fCLK 18 19.8 27 MHz
VSYNC Frequency fVSYNC 54 60 66 Hz
VSYNC cycle time tv 646 650 700 H
HSYNC frequency fHSYNC -- 39.0 50.0 kHz
HSYNC cycle time th 504 508 630 CLK
So we choose a parameter set that lies within the specs
of both variants. We start at .vrefresh = 60,
choose .htotal = 570 and .vtotal = 650 and end up
in a clock of 22.230 MHz.
Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com
This reverts commit 0f9cdd743f.
The interface of the panel is LVDS, not parallel.
The color depth is RGB888, not RGB565.
The panel has additional features, making it not so simple.
The only user (upstream) of this panel is appropriately using panel-lvds.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se
Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.
changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
the underlying mipi_dsi_dcs_write (Robin)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de
The panel-dpi compatible is a fallback that
allows the DT to specify the timing.
When matching panel-dpi expect the device tree to include the
timing information for the display-panel.
Background for this change:
There are a lot of panels and new models hits the market very often.
It is a lost cause trying to chase them all and users of new panels
will often find them in situations that the panel they ues are not
supported by the kernel.
On top of this a lot of panels are customized based on customer
specifications.
Including the panel timing in the device tree allows for a simple
way to describe the actual HW and use this description in a generic
way in the kernel.
This allows uses of proprietary panels, or panels which are not
included in the kernel, to specify the timing in the device tree
together with all the other HW descriptions.
And thus, using the device tree it is then easy to add support
for an otherwise unknown panel.
The current support expect panels that do not require any
delays for prepare/enable/disable/unprepare.
Oleksandr Suvorov replied:
I've just tested this patch on Apalis iMX6Q and Colibri iMX7D using
panel settings from the following patch:
https://lore.kernel.org/linux-arm-kernel/20200115123401.2264293-4-oleksandr.suvorov@toradex.com/
It works for me, thanks!
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Tested-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-6-sam@ravnborg.org
This adds a driver for panels based on the Novatek NT35510
display driver IC, such as the Hydis HVA40WV1 panel found
in the Samsung GT-S7710.
The NT35510 can be used with both internal and external
backlight (such as GPIO backlight) so we support both:
if no external backlight is found, we register a subdriver
for the internal backlight.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-3-linus.walleij@linaro.org
Sam Ravnborg