Commit Graph

40 Commits

Author SHA1 Message Date
Frederic Weisbecker bd6c375b92 rcutorture: Call preempt_schedule() through static call/key
The rcutorture test suite sometimess triggers a random scheduler
preemption call while simulating a read delay.  Unfortunately, its
direct call to preempt_schedule() bypasses the static call/key filter
used by CONFIG_PREEMPT_DYNAMIC.  This breaks the no-preempt assumption
when the dynamic preemption mode is "none".

For example, rcu_blocking_is_gp() is fooled and abbreviates grace periods
when the CPU runs in no-preempt UP mode.

Fix this by making torture_preempt_schedule() call __preempt_schedule(),
which uses the static call/key.

Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2022-04-11 17:07:29 -07:00
Li Zhijian 81faa4f6fb locktorture,rcutorture,torture: Always log error message
Unconditionally log messages corresponding to errors.

Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-12-07 16:36:17 -08:00
Paul E. McKenney efeff6b39b rcutorture: Warn on individual rcu_torture_init() error conditions
When running rcutorture as a module, any rcu_torture_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running rcutorture
built-in, for example, when using the kvm.sh script.  This commit
therefore adds WARN_ON_ONCE() to allow distinguishing rcu_torture_init()
errors when running rcutorture built-in.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-09-13 16:36:16 -07:00
Paul E. McKenney 1afb95fee0 torture: Maintain torture-specific set of CPUs-online books
The TREE01 rcutorture scenario intentionally creates confusion as to the
number of available CPUs by specifying the "maxcpus=8 nr_cpus=43" kernel
boot parameters.  This can disable rcutorture's load shedding, which
currently uses num_online_cpus(), which would count the extra 35 CPUs.
However, the rcutorture guest OS will be provisioned with only 8 CPUs,
which means that rcutorture will present full load even when all but one
of the original 8 CPUs are offline.  This can result in spurious errors
due to extreme overloading of that single remaining CPU.

This commit therefore keeps a separate set of books on the number of
usable online CPUs, so that torture_num_online_cpus() is used for load
shedding instead of num_online_cpus().  Note that initial sizing must
use num_online_cpus() because torture_num_online_cpus() will return
NR_CPUS until shortly after torture_onoff_init() is invoked.

Reported-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:22 -08:00
Paul E. McKenney 8a67a20bf2 torture: Throttle VERBOSE_TOROUT_*() output
This commit adds kernel boot parameters torture.verbose_sleep_frequency
and torture.verbose_sleep_duration, which allow VERBOSE_TOROUT_*() output
to be throttled with periodic sleeps on large systems.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:21 -08:00
Paul E. McKenney ae19aaafae torture: Add fuzzed hrtimer-based sleep functions
This commit adds torture_hrtimeout_ns(), torture_hrtimeout_us(),
torture_hrtimeout_ms(), torture_hrtimeout_jiffies(), and
torture_hrtimeout_s(), each of which uses hrtimers to block for a fuzzed
time interval.  These functions are intended to be used by the various
torture tests to decouple wakeups from the timer wheel, thus providing
more opportunity for Murphy to insert destructive race conditions.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:19 -08:00
Paul E. McKenney 4a5f133c15 rcutorture: Add races with task-exit processing
Several variants of Linux-kernel RCU interact with task-exit processing,
including preemptible RCU, Tasks RCU, and Tasks Trace RCU.  This commit
therefore adds testing of this interaction to rcutorture by adding
rcutorture.read_exit_burst and rcutorture.read_exit_delay kernel-boot
parameters.  These kernel parameters control the frequency and spacing
of special read-then-exit kthreads that are spawned.

[ paulmck: Apply feedback from Dan Carpenter's static checker. ]
[ paulmck: Reduce latency to avoid false-positive shutdown hangs. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 12:01:44 -07:00
Randy Dunlap be44ae6243 locktorture.c: Fix if-statement empty body warnings
When using -Wextra, gcc complains about torture_preempt_schedule()
when its definition is empty (i.e., when CONFIG_PREEMPTION is not
set/enabled).  Fix these warnings by adding an empty do-while block
for that macro when CONFIG_PREEMPTION is not set.
Fixes these build warnings:

../kernel/locking/locktorture.c:119:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:166:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:337:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:490:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:528:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../kernel/locking/locktorture.c:553:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

I have verified that there is no object code change (with gcc 7.5.0).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
2020-04-27 11:05:13 -07:00
Thomas Gleixner 01b1d88b09 rcu: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.

Switch the conditionals in RCU to use CONFIG_PREEMPTION.

That's the first step towards RCU on RT. The further tweaks are work in
progress. This neither touches the selftest bits which need a closer look
by Paul.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190726212124.210156346@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-31 19:03:35 +02:00
Paul E. McKenney ff3bf92d90 torture: Allow inter-stutter interval to be specified
Currently, the inter-stutter interval is the same as the stutter duration,
that is, whatever number of jiffies is passed into torture_stutter_init().
This has worked well for quite some time, but the addition of
forward-progress testing to rcutorture can delay processes for several
seconds, which can triple the time that they are stuttered.

This commit therefore adds a second argument to torture_stutter_init()
that specifies the inter-stutter interval.  While locktorture preserves
the current behavior, rcutorture uses the RCU CPU stall warning interval
to provide a wider inter-stutter interval.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-05-28 09:06:09 -07:00
Paul E. McKenney e7ffb4eb9a Merge branches 'doc.2019.01.26a', 'fixes.2019.01.26a', 'sil.2019.01.26a', 'spdx.2019.02.09a', 'srcu.2019.01.26a' and 'torture.2019.01.26a' into HEAD
doc.2019.01.26a:  Documentation updates.
fixes.2019.01.26a:  Miscellaneous fixes.
sil.2019.01.26a:  Removal of a few more spin_is_locked() instances.
spdx.2019.02.09a:  Add SPDX identifiers to RCU files
srcu.2019.01.26a:  SRCU updates.
torture.2019.01.26a: Torture-test updates.
2019-02-09 08:47:52 -08:00
Paul E. McKenney 082dfb3c93 linux/torture: Convert to SPDX license identifier
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Update .h SPDX format per Joe Perches. ]
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2019-02-09 08:46:31 -08:00
Paul E. McKenney 3a6cb58f15 rcutorture: Add grace period after CPU offline
Beyond a certain point in the CPU-hotplug offline process, timers get
stranded on the outgoing CPU, and won't fire until that CPU comes back
online, which might well be never.  This commit therefore adds a hook
in torture_onoff_init() that is invoked from torture_offline(), which
rcutorture uses to occasionally wait for a grace period.  This should
result in failures for RCU implementations that rely on stranded timers
eventually firing in the absence of the CPU coming back online.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-01-25 15:37:10 -08:00
Paul E. McKenney 474e59b476 rcutorture: Check GP completion at stutter end
The rcu_torture_writer() function invokes stutter_wait() at the end of
each writer pass, which occasionally blocks for an extended time period
in order to ensure that RCU can handle intermittent loads.  But part of
handling a busy period is invoking all the callbacks before the end of
the idle period induced by stutter_wait().

This commit therefore adds a return value to stutter_wait() indicating
whether stutter_wait() actually waited.  In addition, this commit causes
rcu_torture_writer() to test this value and if set, checks that all the
elements of the rcu_tortures[] array have been freed up.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-08-29 09:20:48 -07:00
Paul E. McKenney 3025520ec4 rcutorture: Use per-CPU random state for rcu_torture_timer()
Currently, the rcu_torture_timer() function uses a single global
torture_random_state structure protected by a single global lock.
This conflicts to some extent with performance and scalability,
but even more with the goal of consolidating read-side testing
with rcu_torture_reader().  This commit therefore creates a per-CPU
torture_random_state structure for use by rcu_torture_timer() and
eliminates the lock.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Make rcu_torture_timer_rand static, per 0day Test Robot report. ]
2018-07-12 15:42:04 -07:00
Paul E. McKenney 90127d605f torture: Make online/offline messages appear only for verbose=2
Some bugs reproduce quickly only at high CPU-hotplug rates, so the
rcutorture TREE03 scenario now has only 200 milliseconds spacing between
CPU-hotplug operations.  At this rate, the torture-test pair of console
messages per operation becomes a bit voluminous.  This commit therefore
converts the torture-test set of "verbose" kernel-boot arguments from
bool to int, and prints the extra console messages only when verbose=2.
The default is still verbose=1.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-06-25 11:30:10 -07:00
Paul E. McKenney a2f2577d96 torture: Eliminate torture_runnable and perf_runnable
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules).  However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice.  Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability.  The perf_runnable module parameter
for rcuperf is in the same situation.

This commit therefore removes both torture_runnable instances as well
as perf_runnable.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:29 -08:00
Paul E. McKenney cc1321c96f torture: Reduce #ifdefs for preempt_schedule()
This commit adds a torture_preempt_schedule() that is nothingness
in !PREEMPT builds and is preempt_schedule() otherwise.  Then
torture_preempt_schedule() is used to eliminate several ugly #ifdefs,
both in rcutorture and in locktorture.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-12-11 09:18:22 -08:00
SeongJae Park 489bb3d252 torture: TOROUT_STRING(): Insert a space between flag and message
The TOROUT_STRING() macro does not insert a space between the flag and
the message.  In contrast, other similar torture-test dmesg messages
consistently supply a single space character.  This difference makes the
output hard to read and to mechanically parse.  This commit therefore
adds a space character between flag and message in TOROUT_STRING() output.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-08-22 10:10:12 -07:00
Paul E. McKenney d95f5ba90f torture: Break online and offline functions out of torture_onoff()
This commit breaks torture_online() and torture_offline() out of
torture_onoff() in preparation for allowing waketorture finer-grained
control of its CPU-hotplug workload.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:02:16 -07:00
Davidlohr Bueso d36a7a0d5e torture: Address race in module cleanup
When performing module cleanups by calling torture_cleanup() the
'torture_type' string in nullified However, callers are not necessarily
done, and might still need to reference the variable. This impacts
both rcutorture and locktorture, causing printing things like:

[   94.226618] (null)-torture: Stopping lock_torture_writer task
[   94.226624] (null)-torture: Stopping lock_torture_stats task

Thus delay this operation until the very end of the cleanup process.
The consequence (which shouldn't matter for this kid of program) is,
of course, that we delay the window between rmmod and modprobing,
for instance in module_torture_begin().

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-16 13:41:06 -07:00
Joe Perches eea203fea3 rcu: Use pr_alert/pr_cont for printing logs
User pr_alert/pr_cont for printing the logs from rcutorture module directly
instead of writing it to a buffer and then printing it. This allows us from not
having to allocate such buffers. Also remove a resulting empty function.

I tested this using the parse-torture.sh script as follows:

$ dmesg | grep torture > log.txt
$ bash parse-torture.sh log.txt test
$

There were no warnings which means that parsing went fine.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:24:47 -07:00
Pranith Kumar 6348675c4e torture: Remove unused definition
The torture_parm() macro is the same as torture_param(), and torture_parm()
is not used.  This commit therefore removes torture_parm().

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:32 -07:00
Paul E. McKenney 5228084eed torture: Check for multiple concurrent torture tests
The torture tests are designed to run in isolation, but do not enforce
this isolation.  This commit therefore checks for concurrent torture
tests, and refuses to start new tests while old tests are running.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:29 -07:00
Paul E. McKenney bfefc73aa1 rcutorture: Stop generic kthreads in torture_cleanup()
The specific torture modules (like rcutorture) need to call
torture_cleanup() in any case, so this commit makes torture_cleanup()
deal with torture_shutdown_cleanup() and torture_stutter_cleanup() so
that the specific modules don't have to deal with these details.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:04:27 -08:00
Paul E. McKenney 9c029b8609 rcutorture: Abstract torture_stop_kthread()
Stopping of kthreads is not RCU-specific, so this commit abstracts
out torture_stop_kthread(), saving a few lines of code in the process.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:04:25 -08:00
Paul E. McKenney 47cf29b9e7 rcutorture: Abstract torture_create_kthread()
Creation of kthreads is not RCU-specific, so this commit abstracts
out torture_create_kthread(), saving a few tens of lines of code in
the process.

This change requires modifying VERBOSE_TOROUT_ERRSTRING() to take a
non-const string, so that _torture_create_kthread() can avoid an
open-coded substitute.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:03:24 -08:00
Paul E. McKenney 7fafaac5b9 rcutorture: Fix rcutorture shutdown races
Not all of the rcutorture kthreads waited for kthread_should_stop()
before returning from their top-level functions, and none of them
used torture_shutdown_absorb() properly.  These problems can result in
segfaults and hangs at shutdown time, and some recent changes perturbed
timing sufficiently to make them much more probable.  This commit
therefore creates a torture_kthread_stopping() function that does the
proper kthread shutdown dance in one centralized location.

Accommodate this grouping by making VERBOSE_TOROUT_STRING() capable of
taking a non-const string as its argument, which allows the new
torture_kthread_stopping() to pass its "title" argument directly to
the updated version of VERBOSE_TOROUT_STRING().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-02-23 09:03:21 -08:00
Paul E. McKenney e991dbc077 rcutorture: Abstract torture_shutdown()
Because auto-shutdown of torture testing is not specific to RCU,
this commit moves the auto-shutdown function to kernel/torture.c.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:03:18 -08:00
Paul E. McKenney 628edaa506 rcutorture: Abstract stutter_wait()
Because stuttering the test load (stopping and restarting it) is useful
for non-RCU testing, this commit moves the load-stuttering functionality
to kernel/torture.c.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:02:54 -08:00
Paul E. McKenney 36970bb91d rcutorture: Privatize fullstop
This commit introduces the torture_must_stop() function in order to
keep use of the fullstop variable local to kernel/torture.c.  There
is also a torture_must_stop_irq() counterpart for use from RCU callbacks,
timeout handlers, and the like.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:12 -08:00
Paul E. McKenney 4622b487ec rcutorture: Abstract torture_shutdown_notify()
Because handling the race between rmmod and system shutdown is not
specific to RCU, this commit abstracts torture_shutdown_notify(),
placing this code into kernel/torture.c.  This change also allows
fullstop_mutex to be private to kernel/torture.c.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:11 -08:00
Paul E. McKenney cc47ae0830 rcutorture: Abstract torture-test cleanup
This commit creates a torture_cleanup() that handles the generic
cleanup actions local to kernel/torture.c.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:08 -08:00
Paul E. McKenney b5daa8f3b3 rcutorture: Abstract torture-test initialization
This commit creates torture_init_begin() and torture_init_end() functions
to abstract locking and allow the torture_type and verbose variables
in kernel/torture.o to become static.  With a bit more abstraction,
fullstop_mutex will also become static.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:07 -08:00
Paul E. McKenney 2e9e8081d2 rcutorture: Abstract torture_onoff()
Because online/offline torturing is not specific to RCU, this commit
abstracts it into the kernel/torture.c module to allow other torture
tests to use it.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:06 -08:00
Paul E. McKenney 3808dc9fab rcutorture: Abstract torture_shuffle()
The torture_shuffle() function forces each CPU in turn to go idle
periodically in order to check for problems interacting with per-CPU
variables and with dyntick-idle mode.  Because this sort of debugging
is not specific to RCU, this commit abstracts that functionality.
This in turn requires abstracting some additional infrastructure.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-02-23 09:01:05 -08:00
Paul E. McKenney f67a33561e rcutorture: Abstract torture_shutdown_absorb()
Because handling races between rmmod and normal shutdown is not specific
to rcutorture, this commit renames rcutorture_shutdown_absorb() to
torture_shutdown_absorb() and pulls it out into then kernel/torture.c
module.  This implies pulling the fullstop mechanism into kernel/torture.c
as well.

The exporting of fullstop and fullstop_mutex is ugly and must die.
And it does in fact die in later commits that introduce higher-level
APIs that encapsulate both of these variables.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>`
2014-02-23 09:01:04 -08:00
Paul E. McKenney c2884de38e rcutorture: Abstract TOROUT_STRING() and friends
These diagnostic macros are not confined to torturing RCU, so this commit
makes them available to other torture tests.  Also removed the do-while
from TOROUT_STRING() in response to checkpatch complaints.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-02-23 09:01:02 -08:00
Paul E. McKenney 9e25022541 rcutorture: Abstract torture_param()
Create a torture_param() macro and apply it to rcutorture in order to
save a few lines of code.  This same macro may be applied to other
torture frameworks.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-02-23 09:01:00 -08:00
Paul E. McKenney 51b1130eb5 rcutorture: Abstract rcu_torture_random()
Because rcu_torture_random() will be used by the locking equivalent to
rcutorture, pull it out into its own module.  This new module cannot
be separately configured, instead, use the Kconfig "select" statement
from the Kconfig options of tests depending on it.

Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-02-23 09:00:58 -08:00