This is simillar as fixed-regulator.
Used to extract regulator parent from the device tree.
Without that property used, the parent regulator can be shut down (if not an always on).
Thus leading to inappropriate behavior:
On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
In an effort to give some love to the apparently forgotten MT6795 SoC,
I am upstreaming more components that are necessary to support platforms
powered by this one apart from a simple boot to serial console.
This series adds support for the regulators found in MT6331 and MT6332
main/companion PMICs.
Adding support to each driver in each subsystem is done in different
patch series as to avoid spamming uninteresting patches to maintainers.
Tested on a MT6795 Sony Xperia M5 (codename "Holly") smartphone.
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.
We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Douglas Anderson <dianders@chromium.org>:
The main goal of this series is to make a small dent in cleaning up
the way we deal with regulator loads. The idea is to add some extra
functionality to the regulator "bulk" API so that consumers can
specify the load using that.
Drivers tend to want to define the names of their regulators somewhere
in their source file as "static const". This means, inevitable, that
every driver out there open codes something like this:
static const char * const supply_names[] = {
"vcc", "vccl",
};
static int get_regulators(struct my_data *data)
{
int i;
data->supplies = devm_kzalloc(...)
if (!data->supplies)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
data->supplies[i].supply = supply_names[i];
return devm_regulator_bulk_get(data->dev,
ARRAY_SIZE(supply_names),
data->supplies);
}
Let's make this more convenient by doing providing a helper that does
the copy.
I have chosen to have the "const" input structure here be the exact
same structure as the normal one passed to
devm_regulator_bulk_get(). This is slightly inefficent since the input
data can't possibly have anything useful for "ret" or consumer and
thus we waste 8 bytes per structure. This seems an OK tradeoff for not
introducing an extra structure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.6.I38fc508a73135a5c1b873851f3553ff2a3a625f5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a number of drivers that follow a pattern that looks like
this:
1. Use the regulator bulk API to get a bunch of regulators.
2. Set the load on each of the regulators to use whenever the
regulators are enabled.
Let's make this easier by just allowing the drivers to pass the load
in.
As part of this change we need to move the error printing in
regulator_bulk_get() around; let's switch to the new dev_err_probe()
to simplify it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.4.Ie85f68215ada39f502a96dcb8a1f3ad977e3f68a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
document n_ramp_values field at struct regulator_desc, in order
to solve this warning:
include/linux/regulator/driver.h:434: warning: Function parameter or member 'n_ramp_values' not described in 'regulator_desc'
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/15efc16e878aa327aa2769023bcdf959a795f41d.1656409369.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the I2C Level Translator included in PCA9450 configurable from
devicetree. The reset state is off. By setting nxp,i2c-lt-enable, the
I2C Level Translator will be enabled while in STANDBY or RUN state.
Signed-off-by: Per-Daniel Olsson <perdo@axis.com>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-2-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6366 is a regulator found on boards based on MediaTek MT8186 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Link: https://lore.kernel.org/r/20220401080212.27383-2-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been a fairly quiet release for the regulator API, the main
thing has been the addition of helpers for interrupt handling from Matti
Vaittinen. We do also have support for quite a few new devices and
included in here is a platform/x86 patch series for Intel INT3472 ACPI
devices which this is a dependency for the TPS68470 driver.
- Helpers for trivial interrupt notifications, making it easier for
drivers to handle error interrupts.
- Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826, PMG1100,
and PM8450 and TI TPS68470
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmHcLP8ACgkQJNaLcl1U
h9CFYAf9FwoHGtNWL8zxcAXs9egQVDKY36KXJkjXOkI5dlWVVpkCPoX4JWqfocGx
lINFI1gLGPiwHx69EY45IQEIElltJYlaA53oBXEPxvNF98yAGqaHmlMxa32SeyVH
yTMQfoo0sEjF6l5ELlKyPy51Syda4vTMjVxPkPx0P7XS9EgyXIOXzDfosTTwr9RH
rEUGYuvDyITGEFMY3jyYnpAlvoGWMPnN4AwCb/alD1ZRpJXzGCMqGoRR7jgoi8KC
0IIuTOMGQY7V0LRe9zabHzZbDglVX52rmwGhZlDxbjMrdR4HCdv6homPEb/gJd7f
icqaxLnW+3hoT3501QuD5JVNO2U7Ag==
=htGo
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a fairly quiet release for the regulator API, the main
thing has been the addition of helpers for interrupt handling from
Matti Vaittinen.
We do also have support for quite a few new devices.
Summary:
- Helpers for trivial interrupt notifications, making it easier for
drivers to handle error interrupts.
- Support for Dialog DA914x, Maxim MAX2008x, Qualcomm PM8826,
PMG1100, and PM8450 and TI TPS68470"
* tag 'regulator-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (30 commits)
regulator: Add MAX20086-MAX20089 driver
dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089
regulator: qcom_smd: Align probe function with rpmh-regulator
regulator: remove redundant ret variable
regulator: qcom-labibb: OCP interrupts are not a failure while disabled
regulator: dt-bindings: samsung,s5m8767: Move fixed string BUCK9 to 'properties'
regulator: Introduce tps68470-regulator driver
drivers/regulator: remove redundant ret variable
regulator: fix bullet lists of regulator_ops comment
regulator: Fix type of regulator-coupled-max-spread property
regulator: maxim,max8973: Document interrupts property
regulator: qcom-rpmh: Add support for PM8450 regulators
regulator: qcom,rpmh: Add compatible for PM8450
regulator: da9121: Add DA914x binding info
regulator: da9121: Remove erroneous compatible from binding
regulator: da9121: Add DA914x support
regulator: da9121: Prevent current limit change when enabled
regulator: qcom-rpmh: Add PMG1110 regulators
dt-bindings: regulator: Add compatible for pmg1110
regulator: qcom_spmi: Add pm8226 regulators
...
Since 89a6a5e56c82("regulator: add property parsing and callbacks to set protection limits")
which introduced a warning:
Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:96: WARNING: Unexpected indentation.
Documentation/driver-api/regulator:166: ./include/linux/regulator/driver.h:98: WARNING: Block quote ends without a blank line; unexpected unindent.
Let's fix them.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20211207123230.2262047-1-siyanteng@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a generic map_event helper for regulators which have a notification
IRQ with single, well defined purpose. Eg, IRQ always indicates exactly one
event for exactly one regulator device. For such IRQs the mapping is
trivial.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/603b7ed1938013a00371c1e7ccc63dfb16982b87.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Help drivers avoid storing both supported notification and supported error
flags by supporting conversion from regulator error to notification.
This may help saving some bytes.
Add helper for finding the regulator notification corresponding to a
regulator error.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/eb1755ac0569ff07ffa466cf8912c6fd50e7c7c6.1637736436.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation of IRQ notification helper had still references to
first RFC implementation which called BUG() while trying to protect the
hardware. Behaviour was improved as calling the BUG() was not a proper
solution. Current implementation attempts to call poweroff if handling
of potentially damaging error notification fails. Update the
documentation to reflect the actual behaviour.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/0c9cc4bcf20c3da66fd5a85c97ee4288e5727538.1637233864.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
After this driver was converted to gpiod, clang started warning:
vers/regulator/lp872x.c:689:57: error: implicit conversion from
enumeration type 'enum lp872x_dvs_state' to different enumeration type
'enum gpiod_flags' [-Werror,-Wenum-conversion]
dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate);
~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~
1 error generated.
lp872x_dvs_state was updated to have values from gpiod_flags but this is
not enough to avoid an implicit conversion warning from either GCC or
clang (although GCC enables this warning under -Wextra instead of -Wall
like clang so it is not seen under normal builds).
Eliminate lp872x_dvs_state in favor of using gpiod_flags everywhere so
that there is no more warning about an implicit conversion.
Fixes: 72bf80cf09 ("regulator: lp872x: replacing legacy gpio interface for gpiod")
Link: https://github.com/ClangBuiltLinux/linux/issues/1481
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019004335.193492-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Message-Id: <YWma2yTyuwS5XwhY@fedora>
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper to send IRQ notification for regulator errors had still
old description mentioning calling BUG() as a last resort when
error status reading has kept failing for more times than a given
threshold.
The impementation calling BUG() did never end-up in-tree but was
replaced by hopefully more sophisticated handler trying to power-off
the system.
Fix the documentation to reflect actual behaviour.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210823075651.GA3717293@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
These APIs aren't used anywhere and most-likely exist because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing these discourages any weird logic that could be created with
such an API functions.
Alexandru Ardelean (4):
regulator: devres: remove devm_regulator_unregister_notifier()
function
regulator: devres: remove devm_regulator_unregister() function
regulator: devres: remove
devm_regulator_bulk_unregister_supply_alias()
regulator: devres: unexport devm_regulator_unregister_supply_alias()
drivers/regulator/devres.c | 105 +----------------------------
include/linux/regulator/consumer.h | 23 -------
include/linux/regulator/driver.h | 1 -
3 files changed, 2 insertions(+), 127 deletions(-)
--
2.31.1
Fix warning caused by a blank/empty line:
../include/linux/regulator/machine.h:115: warning: bad line:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210628015422.8845-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere outside of the regulator devres code.
This function is needed for the devm_regulator_bulk_register_supply_alias()
function on the error path, to cleanup any previously registered supply
aliases.
This change makes the devm_regulator_unregister_supply_alias() local to the
regulator core framework, to avoid it being used in any weird logic.
It's also removing the doc-string for
devm_regulator_unregister_supply_alias(), since it doesn't need to be
documented anymore, as no other external consumer should use it.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-5-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere and most-likely exists because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing this also discourages any weird logic that could be created with
such an API function.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-4-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This API hook isn't used anywhere and most-likely exists because of the
general principle of C APIs, where if an API function does an
allocation/registration, it must also have an equivalent
deallocation/deregistration counterpart.
For devm_ functions this isn't all that true (for all cases), as the idea
of these function is to provide an auto-cleanup logic on drivers/system
de-init.
Removing this also discourages any weird logic that could be created with
such an API function.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210625122324.327585-3-aardelean@deviqon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend regulator notification support
This series extends the regulator notification and error flag support.
Initial discussion on the topic can be found here:
https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/
In a nutshell - the series adds:
1. WARNING level events/error flags. (Patch 3)
Current regulator 'ERROR' event notifications for over/under
voltage, over current and over temperature are used to indicate
condition where monitored entity is so badly "off" that it actually
indicates a hardware error which can not be recovered. The most
typical hanling for that is believed to be a (graceful)
system-shutdown. Here we add set of 'WARNING' level flags to allow
sending notifications to consumers before things are 'that badly off'
so that consumer drivers can implement recovery-actions.
2. Device-tree properties for specifying limit values. (Patches 1, 5)
Add limits for above mentioned 'ERROR' and 'WARNING' levels (which
send notifications to consumers) and also for a 'PROTECTION' level
(which will be used to immediately shut-down the regulator(s) W/O
informing consumer drivers. Typically implemented by hardware).
Property parsing is implemented in regulator core which then calls
callback operations for limit setting from the IC drivers. A
warning is emitted if protection is requested by device tree but the
underlying IC does not support configuring requested protection.
3. Helpers which can be registered by IC. (Patch 4)
Target is to avoid implementing IRQ handling and IRQ storm protection
in each IC driver. (Many of the ICs implementin these IRQs do not allow
masking or acking the IRQ but keep the IRQ asserted for the whole
duration of problem keeping the processor in IRQ handling loop).
4. Emergency poweroff function (refactored out of the thermal_core to
kernel/reboot.c) which is called if IC fires error IRQs but IC reading
fails and given retry-count is exceeded. (Patches 2, 4)
Please note that the mutex in the emergency shutdown was replaced by a
simple atomic in order to allow call from any context.
The helper was attempted to be done so it could be used to implement
roughly same logic as is used in qcom-labibb regulator. This means
amongst other things a safety shut-down if IC registers are not readable.
Using these shut-down retry counters are optional. The idea is that the
helper could be also used by simpler ICs which do not provide status
register(s) which can be used to check if error is still active.
ICs which do not have such status register can simply omit the 'renable'
callback (and retry-counts etc) - and helper assumes the situation is Ok
and re-enables IRQ after given time period. If problem persists the
handler is ran again and another notification is sent - but at least the
delay allows processor to avoid IRQ loop.
Patch 7 takes this notification support in use at BD9576MUF.
Patch 8 is related to MFD change which is not really related to the RFC
here. It was added to this series in order to avoid potential conflicts.
Patch 9 adds a maintainers entry.
Changelog v10-RESEND:
- rebased on v5.13-rc4
Changelog v10:
- rebased on v5.13-rc2
- Move rdev_*() print macros to the internal.h and use rdev_dbg()
from irq_helpers.c
- Export rdev_get_name() and move it from coupler.h to driver.h for
others to use. (It was already in coupler.h but not exported -
usage was limited and coupler.h does not sound like optimal place
as rdev_name is not only used by coupled regulators)
- Send all regulator notifications from irq_helpers.c at one OR'd
event for the sake of simplicity. For BD9576 this does not matter
as it has own IRQ for each event case. Header defining events says
they may be OR'd.
- Change WARN() at protection shutdown to pr_emerg as suggested by
Petr.
Changelog v9:
- rebases on v5.13-rc1
- Update thermal documentation
- Fix regulator notification event number
Changelog v8:
- split shutdown API adding and thermal core taking it in use to
own patches.
- replace the spinlock with atomic when ensuring the emergency
shutdown is only called once.
Changelog v7:
general:
- rebased on v5.12-rc7
- new patch for refactoring the hw-failure reboot logic out of
thermal_core.c for others to use.
notification helpers:
- fix regulator error_flags query
- grammar/typos
- do not BUG() but attempt to shut-down the system
- use BITS_PER_TYPE()
Changelog v6:
Add MAINTAINERS entry
Changes to IRQ notifiers
- move devm functions to drivers/regulator/devres.c
- drop irq validity check
- use devm_add_action_or_reset()
- fix styling issues
- fix kerneldocs
Changelog v5:
- Fix the badly formatted pr_emerg() call.
Changelog v4:
- rebased on v5.12-rc6
- dropped RFC
- fix external FET DT-binding.
- improve prints for cases when expecting HW failure.
- styling and typos
Changelog v3:
Regulator core:
- Fix dangling pointer access at regulator_irq_helper()
stpmic1_regulator:
- fix function prototype (compile error)
bd9576-regulator:
- Update over current limits to what was given in new data-sheet
(REV00K)
- Allow over-current monitoring without external FET. Set limits to
values given in data-sheet (REV00K).
Changelog v2:
Generic:
- rebase on v5.12-rc2 + BD9576 series
- Split devm variant of delayed wq to own series
Regulator framework:
- Provide non devm variant of IRQ notification helpers
- shorten dt-property names as suggested by Rob
- unconditionally call map_event in IRQ handling and require it to be
populated
BD9576 regulators:
- change the FET resistance property to micro-ohms
- fix voltage computation in OC limit setting
Provide helper function for IC's implementing regulator notifications
when an IRQ fires. The helper also works for IRQs which can not be acked.
Helper can be set to disable the IRQ at handler and then re-enabling it
on delayed work later. The helper also adds regulator_get_error_flags()
errors in cache for the duration of IRQ disabling.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/ebdf86d8c22b924667ec2385330e30fcbfac0119.1622628334.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rdev print helpers are a nice way to print messages related to a
specific regulator device. Move them from core.c to internal.h
As the rdev print helpers use rdev_get_name() export it from core.c. Also
move the declaration from coupler.h to driver.h because the rdev name is
not just a coupled regulator property. I guess the main audience for
rdev_get_name() will be the regulator core and drivers.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/dc7fd70dc31de4d0e820b7646bb78eeb04f80735.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 'warning' level events and error flags to regulator core.
Current regulator core notifications are used to inform consumers
about errors where HW is misbehaving in such way it is assumed to
be broken/unrecoverable.
There are PMICs which are designed for system(s) that may have use
for regulator indications sent before HW is damaged so that some
board/consumer specific recovery-event can be performed while
continuing most of the normal operations.
Add new WARNING level events and notifications to be used for
that purpose.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/9b54aa5589ae4b5945d53d114bac3fae55fa4818.1622628333.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds regulator_sync_voltage_rdev(), which is used as a dependency
for new Tegra power domain code.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmDDivETHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoTdHD/9sFhALQjPLLj6g8ioa0VHoF/QlxFS8
XA+Ws4syPVxx+QfbrteJMoh98pASRovKUsKUheOQsvWgetprMSpf0/vg9630+4ap
hRmmiCb8SCFZw8aGYUVObKNUfepPqOM4ArrhcPbiw/aF4vGt7GZB1eXP5++yWLfS
BgY6gC9XVFLvxDHVnB6MqtHzGNlxBcj50f+uZiz5I4/Vk2CkUp9wjS2gZFhRVNao
ZFK0xVObbmBlgeMulE604rkCUkZHfdtXDF7gEApCrv5H2eZ2kNKBjEDxarOyngvb
SRkeVjQwDvc5RJ1dBNIlqcCAScpQr4ryCLK+gPLEHwcqEDaz94ClkyMt+TF9Ox40
QYMEvhz+kTo7LCg8r8rS9T/LoXMRdafxlJDK81Kqg+MaqkEKl5qpy15poc9CkyQX
Rrkrpf45dmYPcz7VVpJ6/6MejiUNAKcIAxuP6n2SlXqyN4ViuJGGI27fLw7hDSFs
X1ithEhc7/9kNCuhyZ6rmi3OKk24GoGX5tSPjyt1M+LiAm2U7GF1AItPDRu//ZgB
5A4bLgQUX6YmS0EyRjNlru1xYn1JwjLIbuwoq4acxcrCVvoRQ+ZIatPOEEU9K7Fc
wfoglwFyE9EnSkmUNBpOu/neFRYj2OzCWT6uKtxeDU/8cx6NGPi0TNOlaxrf3RFF
2jZj8MEJVHSWYw==
=/dXp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDHMi0ACgkQJNaLcl1U
h9Dbvgf/dAcS9d9lgjijzGYcvsh3hBpWqimMrO/dfXlalqXfdU0VN82++0WIcpC7
uoQ2I6RwU4NNTvMUjbmyQsYONMBNthxYEgGDdtwOE03TLVJHc9KyKCzRLFp0E0sX
wHvoAbSZbzd1OIC+96iWJzeC9rq24LX5IaP8301hWKFhbZpo3/uP9yTgQuxSp0cf
tuQDu8vzW7TuC7pxy06FgCmVhsEd2OXEO+wu9OWzMoIAh2Z82KlEb8j0cpV0G0d1
jPdDanaFwJ3LZevbMXZQnJyCGRhFU74vboSC3Vb8e2H7eCwb68s3Z5mo1Dxq6M3o
qE9JGQRgVVOHr67vYXfirOzmhz2D5g==
=5rP3
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-regulator' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into regulator-5.14
regulator: Changes for v5.14-rc1
This adds regulator_sync_voltage_rdev(), which is used as a dependency
for new Tegra power domain code.
The MT6359P is a eco version for MT6359 regulator.
We add support based on MT6359 regulator driver.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The MT6359 is a regulator found on boards based on MediaTek MT6779 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Wen Su <wen.su@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Some NVIDIA Tegra devices use a CPU soft-reset method for the reboot and
in this case we need to restore the coupled voltages to the state that is
suitable for hardware during boot. Add new regulator_sync_voltage_rdev()
helper which is needed by regulator drivers in order to sync voltage of
a coupled regulators.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The jiffies-based off_on_delay implementation has a couple of problems
that cause it to sometimes not actually delay for the required time:
(1) If, for example, the off_on_delay time is equivalent to one jiffy,
and the ->last_off_jiffy is set just before a new jiffy starts,
then _regulator_do_enable() does not wait at all since it checks
using time_before().
(2) When jiffies overflows, the value of "remaining" becomes higher
than "max_delay" and the code simply proceeds without waiting.
Fix these problems by changing it to use ktime_t instead.
[Note that since jiffies doesn't start at zero but at INITIAL_JIFFIES
("-5 minutes"), (2) above also led to the code not delaying if
the first regulator_enable() is called when the ->last_off_jiffy is not
initialised, such as for regulators with ->constraints->boot_on set.
It's not clear to me if this was intended or not, but I've preserved
this behaviour explicitly with the check for a non-zero ->last_off.]
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20210423114524.26414-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some drivers need to translate voltage values to selectors prior regulator
registration. Currently a regulator_desc based list_voltages helper is only
exported for regulators using the linear_ranges. Export similar helper also
for regulators using simple linear mapping.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes: 0935ff5f1f ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing stubs to regulator/consumer.h in order to fix COMPILE_TEST
of the kernel. In particular this should fix compile-testing of OPP core
because of a missing stub for regulator_sync_voltage().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120205844.12658-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform data header was only used to pass platform
data from board files. We now populate the regulators
exclusively from device tree, so the header contents can
be moved into the regulator drivers.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct ab8500_regulator_platform_data was a leftover
since the days before we probed all regulators from the
device tree. The ab8500-ext regulator was the only used,
defining platform data and register intialization that
was never used for anything, a copy of a boardfile no
longer in use.
Delete the ab8500_regulator_platform_data and make the
ab8500-ext regulator reference the regulator init data
in the local file directly. We are 100% device tree
these days.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201210212748.5849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jerome Neanne