Add support for queueing SKBs to the host over the transfer ring of the
relevant channel. The mhi_ep_queue_skb() API will be used by the client
networking drivers to queue the SKBs to the host over MHI bus.
The host will add ring elements to the transfer ring periodically for
the device and the device will write SKBs to the ring elements. If a
single SKB doesn't fit in a ring element (TRE), it will be placed in
multiple ring elements and the overflow event will be sent for all ring
elements except the last one. For the last ring element, the EOT event
will be sent indicating the packet boundary.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing the channel rings from host. For the channel
ring associated with DL channel, the xfer callback will simply invoked.
For the case of UL channel, the ring elements will be read in a buffer
till the write pointer and later passed to the client driver using the
xfer callback.
The client drivers should provide the callbacks for both UL and DL
channels during registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Data transfer between host and the ep device happens over the transfer
ring associated with each bi-directional channel pair. Host defines the
transfer ring by allocating memory for it. The read and write pointer
addresses of the transfer ring are stored in the channel context.
Once host places the elements in the transfer ring, it increments the
write pointer and rings the channel doorbell. Device will receive the
doorbell interrupt and will process the transfer ring elements.
This commit adds support for reading the transfer ring elements from
the transfer ring till write pointer, incrementing the read pointer and
finally sending the completion event to the host through corresponding
event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing the command rings. Command ring is used by the
host to issue channel specific commands to the ep device. Following
commands are supported:
1. Start channel
2. Stop channel
3. Reset channel
Once the device receives the command doorbell interrupt from host, it
executes the command and generates a command completion event to the
host in the primary event ring.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for handling MHI_RESET in MHI endpoint stack. MHI_RESET will
be issued by the host during shutdown and during error scenario so that
it can recover the endpoint device without restarting the whole device.
MHI_RESET handling involves resetting the internal MHI registers, data
structures, state machines, resetting all channels/rings and setting
MHICTRL.RESET bit to 0. Additionally the device will also move to READY
state if the reset was due to SYS_ERR.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MHI endpoint power_down that includes stopping all
available channels, destroying the channels, resetting the event and
transfer rings and freeing the host cache.
The stack will be powered down whenever the physical bus link goes down.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MHI endpoint power_up that includes initializing the MMIO
and rings, caching the host MHI registers, and setting the MHI state to M0.
After registering the MHI EP controller, the stack has to be powered up
for usage.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for processing MHI endpoint interrupts such as control
interrupt, command interrupt and channel interrupt from the host.
The interrupts will be generated in the endpoint device whenever host
writes to the corresponding doorbell registers. The doorbell logic
is handled inside the hardware internally.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the MHI state machine by controlling the state
transitions. Only the following MHI state transitions are supported:
1. Ready state
2. M0 state
3. M3 state
4. SYS_ERR state
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for sending the events to the host over MHI bus from the
endpoint. Following events are supported:
1. Transfer completion event
2. Command completion event
3. State change event
4. Execution Environment (EE) change event
An event is sent whenever an operation has been completed in the MHI EP
device. Event is sent using the MHI event ring and additionally the host
is notified using an IRQ if required.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for managing the Memory Mapped Input Output (MMIO) registers
of the MHI bus. All MHI operations are carried out using the MMIO registers
by both host and the endpoint device.
The MMIO registers reside inside the endpoint device memory (fixed
location based on the platform) and the address is passed by the MHI EP
controller driver during its registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint client drivers
with the MHI endpoint stack. MHI endpoint client drivers bind to one
or more MHI endpoint devices inorder to send and receive the upper-layer
protocol packets like IP packets, modem control messages, and
diagnostics messages over MHI bus.
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds support for registering MHI endpoint controller drivers
with the MHI endpoint stack. MHI endpoint controller drivers manage
the interaction with the host machines (such as x86). They are also the
MHI endpoint bus master in charge of managing the physical link between
the host and endpoint device. Eventhough the MHI spec is bus agnostic,
the current implementation is entirely based on PCIe bus.
The endpoint controller driver encloses all information about the
underlying physical bus like PCIe. The registration process involves
parsing the channel configuration and allocating an MHI EP device.
Channels used in the endpoint stack follows the perspective of the MHI
host stack. i.e.,
UL - From host to endpoint
DL - From endpoint to host
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam