Provide DIV_U64_ROUND_CLOSEST helper which uses div_u64 to perform
division rounded to the closest integer using unsigned 64bit
dividend and unsigned 32bit divisor.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20220219152818.4319-2-kabel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is needed for KVM's nested virtualization. The nested TSC
scaling implementation requires multiplying the signed TSC offset with
the unsigned TSC multiplier.
Signed-off-by: Ilias Stamatis <ilstam@amazon.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210526184418.28881-2-ilstam@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several functions at math64.h that are also
defined at div64.c. As both are included at kernel-api.rst,
Sphinx 3.x complains about symbol duplication:
./lib/math/div64.c:73: WARNING: Duplicate C declaration, also defined in 'core-api/kernel-api'.
Declaration is 'div_s64_rem'.
./lib/math/div64.c:104: WARNING: Duplicate C declaration, also defined in 'core-api/kernel-api'.
Declaration is 'div64_u64_rem'.
./lib/math/div64.c:144: WARNING: Duplicate C declaration, also defined in 'core-api/kernel-api'.
Declaration is 'div64_u64'.
./lib/math/div64.c:172: WARNING: Duplicate C declaration, also defined in 'core-api/kernel-api'.
Declaration is 'div64_s64'.
In order to avoid Sphinx warnings about duplication, change the kernel-doc
markups to just comments at math64.h.
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Provide DIV_S64_ROUND_CLOSEST helper which uses div_s64 to perform
division rounded to the closest integer using signed 64bit
dividend and signed 32bit divisor.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
People report that utime and stime from /proc/<pid>/stat become very
wrong when the numbers are big enough, especially if you watch these
counters incrementally.
Specifically, the current implementation of: stime*rtime/total,
results in a saw-tooth function on top of the desired line, where the
teeth grow in size the larger the values become. IOW, it has a
relative error.
The result is that, when watching incrementally as time progresses
(for large values), we'll see periods of pure stime or utime increase,
irrespective of the actual ratio we're striving for.
Replace scale_stime() with a math64.h helper: mul_u64_u64_div_u64()
that is far more accurate. This also allows architectures to override
the implementation -- for instance they can opt for the old algorithm
if this new one turns out to be too expensive for them.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200519172506.GA317395@hirez.programming.kicks-ass.net
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Split math64.h into linux and common headers to make the latter suitable
for inclusion in the vDSO library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200320145351.32292-10-vincenzo.frascino@arm.com
Provide DIV64_U64_ROUND_CLOSEST helper which performs division rounded to
the closest integer using an unsigned 64bit dividend and divisor.
This will be used in a follow-up patch to allow calculation of clock
divisors with high frequency parents in the R-Car Gen3 CPG MSSR driver
where overflow occurs if either the dividend or divisor is 32bit.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I've noticed, that dying memory cgroups are often pinned in memory by a
single pagecache page. Even under moderate memory pressure they sometimes
stayed in such state for a long time. That looked strange.
My investigation showed that the problem is caused by applying the LRU
pressure balancing math:
scan = div64_u64(scan * fraction[lru], denominator),
where
denominator = fraction[anon] + fraction[file] + 1.
Because fraction[lru] is always less than denominator, if the initial scan
size is 1, the result is always 0.
This means the last page is not scanned and has
no chances to be reclaimed.
Fix this by rounding up the result of the division.
In practice this change significantly improves the speed of dying cgroups
reclaim.
[guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments]
Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle
Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----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=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing kernel-doc notation (function parameters) for several
div() functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It turns out that while GCC-4.4 manages to generate 32x32->64 mult
instructions for the 32bit mul_u64_u32_shr() code, any GCC after that
fails horribly.
Fix this by providing an explicit mul_u32_u32() function which can be
architcture provided.
Reported-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Christopher S. Hall <christopher.s.hall@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Liav Rehana <liavr@mellanox.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Parit Bhargava <prarit@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161209083011.GD15765@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both VMX and SVM propagate virtual_tsc_khz in the same way, so this
patch removes the call-back set_tsc_khz() and replaces it with a common
function.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX and SVM calculate the TSC scaling ratio in a similar logic, so this
patch generalizes it to a common TSC scaling function.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
[Inline the multiplication and shift steps into mul_u64_u64_shr. Remove
BUG_ON. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce mul_u64_u32_shr() as proposed by Andy a while back; it
allows using 64x64->128 muls on 64bit archs and recent GCC
which defines __SIZEOF_INT128__ and __int128.
(This new method will be used by the scheduler.)
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-hxjoeuzmrcaumR0uZwjpe2pv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit f792685006 ("math64: New
div64_u64_rem helper") implemented div64_u64 in terms of div64_u64_rem.
But div64_u64_rem was removed because it slowed down div64_u64 (and
there were no other users of div64_u64_rem).
Device Mapper's I/O statistics support has a need for div64_u64_rem;
reintroduce this helper as a separate method that doesn't slow down
div64_u64, especially on 32-bit systems.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
There is div64_long() to handle the s64/long division, but no mocro do
u64/ul division. It is necessary in some scenarios, so add this
function.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alex Shi <alex.shi@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit f792685006.
The cputime scaling code was changed/fixed and does not need the
div64_u64_rem() primitive anymore. It has no other users, so let's
remove them.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1367314507-9728-4-git-send-email-sgruszka@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide an extended version of div64_u64() that
also returns the remainder of the division.
We are going to need this to refine the cputime
scaling code.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Add a div64_long macro which is used to devide a 64bit number by a long (which
can be 4 bytes on 32bit systems and 8 bytes on 64bit systems).
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Cc: johnstul@us.ibm.com
Link: http://lkml.kernel.org/r/1331829374-31543-1-git-send-email-levinsasha928@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current implementation of div64_u64 for 32bit systems returns an
approximately correct result when the divisor exceeds 32bits. Since doing
64bit division using 32bit hardware is a long since solved problem we just
use one of the existing proven methods.
Additionally, add a div64_s64 function to correctly handle doing signed
64bit division.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=616105
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ben Woodard <bwoodard@llnl.gov>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iter_div_u64_rem is used in the x86-64 vdso, which cannot call other
kernel code. For this case, provide the always_inlined version,
__iter_div_u64_rem.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have a few instances of the open-coded iterative div/mod loop, used
when we don't expcet the dividend to be much bigger than the divisor.
Unfortunately modern gcc's have the tendency to strength "reduce" this
into a full mod operation, which isn't necessarily any faster, and
even if it were, doesn't exist if gcc implements it in libgcc.
The workaround is to put a dummy asm statement in the loop to prevent
gcc from performing the transformation.
This patch creates a single implementation of this loop, and uses it
to replace the open-coded versions I know about.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename div64_64 to div64_u64 to make it consistent with the other divide
functions, so it clearly includes the type of the divide. Move its definition
to math64.h as currently no architecture overrides the generic implementation.
They can still override it of course, but the duplicated declarations are
avoided.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current do_div doesn't explicitly say that it's unsigned and the signed
counterpart is missing, which is e.g. needed when dealing with time values.
This introduces 64bit signed/unsigned divide functions which also attempts to
cleanup the somewhat awkward calling API, which often requires the use of
temporary variables for the dividend. To avoid the need for temporary
variables everywhere for the remainder, each divide variant also provides a
version which doesn't return the remainder.
Each architecture can now provide optimized versions of these function,
otherwise generic fallback implementations will be used.
As an example I provided an alternative for the current x86 divide, which
avoids the asm casts and using an union allows gcc to generate better code.
It also avoids the upper divde in a few more cases, where the result is known
(i.e. upper quotient is zero).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>