Preserve the fs-verity status of a btrfs file across send/recv.
There is no facility for installing the Merkle tree contents directly on
the receiving filesystem, so we package up the parameters used to enable
verity found in the verity descriptor. This gives the receive side
enough information to properly enable verity again. Note that this means
that receive will have to re-compute the whole Merkle tree, similar to
how compression worked before encoded_write.
Since the file becomes read-only after verity is enabled, it is
important that verity is added to the send stream after any file writes.
Therefore, when we process a verity item, merely note that it happened,
then actually create the command in the send stream during
'finish_inode_if_needed'.
This also creates V3 of the send stream format, without any format
changes besides adding the new commands and attributes.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Define a function named fsverity_get_digest() to return the verity file
digest and the associated hash algorithm (enum hash_algo).
This assumes that before calling fsverity_get_digest() the file must have
been opened, which is even true for the IMA measure/appraise on file
open policy rule use case (func=FILE_CHECK). do_open() calls vfs_open()
immediately prior to ima_file_check().
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire(). Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE(). However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself. This may not be the case if allocating the object also
involves initializing a static or global variable, for example.
fsverity_info::tree_params.hash_alg->tfm is a crypto_ahash object that's
internal to and is allocated by the crypto subsystem. So by using
READ_ONCE() for ->i_verity_info, we're relying on internal
implementation details of the crypto subsystem.
Remove this fragile assumption by using smp_load_acquire() instead.
Also fix the cmpxchg logic to correctly execute an ACQUIRE barrier when
losing the cmpxchg race, since cmpxchg doesn't guarantee a memory
barrier on failure.
(Note: I haven't seen any real-world problems here. This change is just
fixing the code to be guaranteed correct and less fragile.)
Fixes: fd2d1acfca ("fs-verity: add the hook for file ->open()")
Link: https://lore.kernel.org/r/20200721225920.114347-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Remove the unnecessary 'extern' keywords from function declarations.
This makes it so that we don't have a mix of both styles, so it won't be
ambiguous what to use in new fs-verity patches. This also makes the
code shorter and matches the 'checkpatch --strict' expectation.
Link: https://lore.kernel.org/r/20200511192118.71427-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Fix all kerneldoc warnings in fs/verity/ and include/linux/fsverity.h.
Most of these were due to missing documentation for function parameters.
Detected with:
scripts/kernel-doc -v -none fs/verity/*.{c,h} include/linux/fsverity.h
This cleanup makes it possible to check new patches for kerneldoc
warnings without having to filter out all the existing ones.
Link: https://lore.kernel.org/r/20200511192118.71427-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When fs-verity verifies data pages, currently it reads each Merkle tree
page synchronously using read_mapping_page().
Therefore, when the Merkle tree pages aren't already cached, fs-verity
causes an extra 4 KiB I/O request for every 512 KiB of data (assuming
that the Merkle tree uses SHA-256 and 4 KiB blocks). This results in
more I/O requests and performance loss than is strictly necessary.
Therefore, implement readahead of the Merkle tree pages.
For simplicity, we take advantage of the fact that the kernel already
does readahead of the file's *data*, just like it does for any other
file. Due to this, we don't really need a separate readahead state
(struct file_ra_state) just for the Merkle tree, but rather we just need
to piggy-back on the existing data readahead requests.
We also only really need to bother with the first level of the Merkle
tree, since the usual fan-out factor is 128, so normally over 99% of
Merkle tree I/O requests are for the first level.
Therefore, make fsverity_verify_bio() enable readahead of the first
Merkle tree level, for up to 1/4 the number of pages in the bio, when it
sees that the REQ_RAHEAD flag is set on the bio. The readahead size is
then passed down to ->read_merkle_tree_page() for the filesystem to
(optionally) implement if it sees that the requested page is uncached.
While we're at it, also make build_merkle_tree_level() set the Merkle
tree readahead size, since it's easy to do there.
However, for now don't set the readahead size in fsverity_verify_page(),
since currently it's only used to verify holes on ext4 and f2fs, and it
would need parameters added to know how much to read ahead.
This patch significantly improves fs-verity sequential read performance.
Some quick benchmarks with 'cat'-ing a 250MB file after dropping caches:
On an ARM64 phone (using sha256-ce):
Before: 217 MB/s
After: 263 MB/s
(compare to sha256sum of non-verity file: 357 MB/s)
In an x86_64 VM (using sha256-avx2):
Before: 173 MB/s
After: 215 MB/s
(compare to sha256sum of non-verity file: 223 MB/s)
Link: https://lore.kernel.org/r/20200106205533.137005-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a function for filesystems to call to implement the
FS_IOC_MEASURE_VERITY ioctl. This ioctl retrieves the file measurement
that fs-verity calculated for the given file and is enforcing for reads;
i.e., reads that don't match this hash will fail. This ioctl can be
used for authentication or logging of file measurements in userspace.
See the "FS_IOC_MEASURE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a function for filesystems to call to implement the
FS_IOC_ENABLE_VERITY ioctl. This ioctl enables fs-verity on a file.
See the "FS_IOC_ENABLE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree. These will be called
from filesystems' ->readpage() and ->readpages() methods.
Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.
See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a function fsverity_prepare_setattr() which filesystems that support
fs-verity must call to deny truncates of verity files.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add the fsverity_file_open() function, which prepares an fs-verity file
to be read from. If not already done, it loads the fs-verity descriptor
from the filesystem and sets up an fsverity_info structure for the inode
which describes the Merkle tree and contains the file measurement. It
also denies all attempts to open verity files for writing.
This commit also begins the include/linux/fsverity.h header, which
declares the interface between fs/verity/ and filesystems.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>