Commit Graph

3 Commits

Author SHA1 Message Date
Rhys Perry 444972b2b2 misc: alcor_pci: Add AU6625 to list of supported PCI_IDs
I have added the AU6625 PCI_ID to the list of supported IDs:
alcor_pci.c
// Added au6625s ID to the array of supported devices
alcor_pci.h
// Added entry to define the PCI ID

Made it fit in with the already submitted code:
alcor_pci.c
// Added config entry to that matches the one for au6601

>From general usage there seems to be no problems.

Signed-off-by: Rhys Perry <rhysperry111@gmail.com>
Link: https://lore.kernel.org/r/20191229171824.10308-1-rhysperry111@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 15:16:50 +01:00
Daniel Drake c671b6dede mmc: alcor: work with multiple-entry sglists
DMA on this hardware is limited to dealing with a 4096 bytes at a
time. Previously, the driver was set up accordingly to request single-page
DMA buffers, however that had the effect of generating a large number
of small MMC requests for data I/O.

Improve the driver to accept multi-entry scatter-gather lists. The size of
each entry is already capped to 4096 bytes (AU6601_MAX_DMA_BLOCK_SIZE),
matching the hardware requirements. Existing driver code already iterates
through remaining sglist entries after each DMA transfer is complete.

Also add some comments to help clarify the situation, and clear up
some of the confusion I had regarding DMA vs PIO.

Testing with dd, this increases write performance from 2mb/sec to
10mb/sec, and increases read performance from 4mb/sec to 14mb/sec.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAD8Lp47JYdZzbV9F+asNwvSfLF_po_J7ir6R_Vb-Dab21_=Krw@mail.gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-05-06 11:55:39 +02:00
Oleksij Rempel 4f556bc04e misc: cardreader: add new Alcor Micro Cardreader PCI driver
This driver provides support for Alcor Micro AU6601 and AU6621
card readers.

This is single LUN HW and it is expected to work with following standards:
- Support SDR104 / SDR50
- MultiMedia Card (MMC)
- Memory Stick (MS)
- Memory Stick PRO (MS_Pro)

Since it is a PCIe controller, it should work on any architecture
supporting PCIe. For now, it was developed and tested only on x86_64.

This driver is a result of RE work and was created without any
documentation or real knowledge of HW internals.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17 08:26:24 +01:00