Add trace event to report samples and their timestamp coming from the
EC. It allows to check if the timestamps are correct and the filter is
working correctly without introducing too much latency.
To enable these events:
cd /sys/kernel/debug/tracing/
echo 1 > events/cros_ec/enable
echo 0 > events/cros_ec/cros_ec_request_start/enable
echo 0 > events/cros_ec/cros_ec_request_done/enable
echo 1 > tracing_on
cat trace_pipe
Observe event flowing:
irq/105-chromeo-95 [000] .... 613.659758: cros_ec_sensorhub_timestamp: ...
irq/105-chromeo-95 [000] .... 613.665219: cros_ec_sensorhub_filter: dx: ...
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In ftrace, add more fields to the cros_ec command event:
- Add size of commands to check if they are properly set.
- Add offset (in case an EC is cascaded being another EC),
to allow proper command output
With:
echo 1 > events/cros_ec/cros_ec_cmd/enable
We now have (on samus)
Invalid command for the sensor stack:
ectool-6942 [002] .... 3082.783116: cros_ec_request_done: version: 3,
offset: 0, command: EC_CMD_MOTION_SENSE_CMD, outsize: 2, insize: 19,
ec result: EC_RES_INVALID_PARAM, retval: 0
Powerd accessing PD EC being the main EC:
powerd-1272 [002] .... 40.644026: cros_ec_request_done: version: 0,
offset: 1, command: EC_CMD_USB_PD_POWER_INFO, outsize: 1, insize: 16,
ec result: EC_RES_SUCCESS, retval: 16
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Add the ability to view response codes as well.
I dropped the EVENT_CLASS since there is only one event per class.
cros_ec_cmd has now been renamed to cros_ec_request_start.
Example:
$ echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable
$ cat /sys/kernel/debug/tracing/trace
369.416372: cros_ec_request_start: version: 0, command: EC_CMD_USB_PD_POWER_INFO
369.420528: cros_ec_request_done: version: 0, command: EC_CMD_USB_PD_POWER_INFO, ec result: EC_RES_SUCCESS, retval: 16
369.420529: cros_ec_request_start: version: 0, command: EC_CMD_USB_PD_DISCOVERY
369.421383: cros_ec_request_done: version: 0, command: EC_CMD_USB_PD_DISCOVERY, ec result: EC_RES_SUCCESS, retval: 5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This is useful to see which EC commands are being executed and when.
To enable:
echo 1 > /sys/kernel/debug/tracing/events/cros_ec/enable
Example:
cros_ec_cmd: version: 0, command: EC_CMD_GET_VERSION
cros_ec_cmd: version: 0, command: EC_CMD_GET_PROTOCOL_INFO
cros_ec_cmd: version: 1, command: EC_CMD_GET_CMD_VERSIONS
cros_ec_cmd: version: 1, command: EC_CMD_USB_PD_CONTROL
The list of current commands is generated using the following script:
sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1),\\/p' include/linux/mfd/cros_ec_commands.h
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Gwendal Grignou