Make the two places where lookup helpers can be called either on lower
or upper layers take the mount's idmapping into account. To this end we
pass down the mount in struct ovl_lookup_data. It can later also be used
to construct struct path for various other helpers. This is needed to
support idmapped base layers with overlay.
Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a helper that allows to retrieve ovl xattrs from either lower or
upper layers. To stop passing mnt and dentry separately everywhere use
struct path which more accurately reflects the tight coupling between
mount and dentry in this helper. Swich over all places to pass a path
argument that can operate on either upper or lower layers. This is
needed to support idmapped base layers with overlayfs.
Some helpers are always called with an upper dentry, which is now utilized
by these helpers to create the path. Make this usage explicit by renaming
the argument to "upperdentry" and by renaming the function as well in some
cases. Also add a check in ovl_do_getxattr() to catch misuse of these
functions.
Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use helpers ovl_*xattr() to access user/trusted.overlay.* xattrs
and use helpers ovl_do_*xattr() to access generic xattrs. This is a
preparatory patch for using idmapped base layers with overlay.
Note that a few of those places called vfs_*xattr() calls directly to
reduce the amount of debug output. But as Miklos pointed out since
overlayfs has been stable for quite some time the debug output isn't all
that relevant anymore and the additional debug in all locations was
actually quite helpful when developing this patch series.
Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We get occasional reports of lookup errors due to mismatched
origin ftype from users that re-format a lower squashfs image.
Commit 13c6ad0f45 ("ovl: document lower modification caveats")
tries to discourage the practice of re-formating lower layers and
describes the expected behavior as undefined.
Commit b0e0f69731 ("ovl: restrict lower null uuid for "xino=auto"")
limits the configurations in which origin file handles are followed.
In addition to these measures, change the behavior in case of detecting
a mismatch origin ftype in lookup to issue a warning, not follow origin,
but not fail the lookup operation either.
That should make overall more users happy without any big consequences.
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxgPq9E9xxwU2CDyHy-_yCZZeymg+3n+-6AqkGGE1YtwvQ@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYIwTsgAKCRDh3BK/laaZ
PDktAP41eScbCiFzXDRjXw9S7Wfd8HEct0y1p+9BUh8m3VdHfwEA0pDlJWNaJdYW
nFixPJ5GsAfxo+1ags0vn06CUS/K4gA=
=QlbJ
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Fix a regression introduced in 5.2 that resulted in valid overlayfs
mounts being rejected with ELOOP (Too many levels of symbolic links)
- Fix bugs found by various tools
- Miscellaneous improvements and cleanups
* tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: add debug print to ovl_do_getxattr()
ovl: invalidate readdir cache on changes to dir with origin
ovl: allow upperdir inside lowerdir
ovl: show "userxattr" in the mount data
ovl: trivial typo fixes in the file inode.c
ovl: fix misspellings using codespell tool
ovl: do not copy attr several times
ovl: remove ovl_map_dev_ino() return value
ovl: fix error for ovl_fill_super()
ovl: fix missing revert_creds() on error path
ovl: fix leaked dentry
ovl: restrict lower null uuid for "xino=auto"
ovl: check that upperdir path is not on a read-only mount
ovl: plumb through flush method
Since commit 6815f479ca ("ovl: use only uppermetacopy state in
ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a
metacopy error, which leads to dentry leaks when shutting down the related
superblock:
overlayfs: refusing to follow metacopy origin for (/file0)
...
BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay]
...
WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d
CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1
...
RIP: 0010:umount_check.cold+0x107/0x14d
...
Call Trace:
d_walk+0x28c/0x950
? dentry_lru_isolate+0x2b0/0x2b0
? __kasan_slab_free+0x12/0x20
do_one_tree+0x33/0x60
shrink_dcache_for_umount+0x78/0x1d0
generic_shutdown_super+0x70/0x440
kill_anon_super+0x3e/0x70
deactivate_locked_super+0xc4/0x160
deactivate_super+0xfa/0x140
cleanup_mnt+0x22e/0x370
__cleanup_mnt+0x1a/0x30
task_work_run+0x139/0x210
do_exit+0xb0c/0x2820
? __kasan_check_read+0x1d/0x30
? find_held_lock+0x35/0x160
? lock_release+0x1b6/0x660
? mm_update_next_owner+0xa20/0xa20
? reacquire_held_locks+0x3f0/0x3f0
? __sanitizer_cov_trace_const_cmp4+0x22/0x30
do_group_exit+0x135/0x380
__do_sys_exit_group.isra.0+0x20/0x20
__x64_sys_exit_group+0x3c/0x50
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
...
VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day...
This fix has been tested with a syzkaller reproducer.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 6815f479ca ("ovl: use only uppermetacopy state in ovl_lookup()")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210329164907.2133175-1-mic@digikod.net
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
CAP_DAC_READ_SEARCH is required by open_by_handle_at(2) so check it in
ovl_decode_real_fh() as well to prevent privilege escalation for
unprivileged overlay mounts.
[Amir] If the mounter is not capable in init ns, ovl_check_origin() and
ovl_verify_index() will not function as expected and this will break index
and nfs export features. So check capability in ovl_can_decode_fh(), to
auto disable those features.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the lower file of a metacopy is inaccessible, -EIO is returned. For
users not familiar with overlayfs internals, such as myself, the meaning of
this error may not be apparent or easy to determine, since the (metacopy)
file is present and open/stat succeed when accessed outside of the overlay.
Add a rate-limited warning for orphan metacopy to give users a hint when
investigating such errors.
Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxi23Zsmfb4rCed1n=On0NNA5KZD74jjjeyz+et32sk-gg@mail.gmail.com/
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This replaces uuid with null in overlayfs file handles and thus relaxes
uuid checks for overlay index feature. It is only possible in case there is
only one filesystem for all the work/upper/lower directories and bare file
handles from this backing filesystem are unique. In other case when we have
multiple filesystems lets just fallback to "uuid=on" which is and
equivalent of how it worked before with all uuid checks.
This is needed when overlayfs is/was mounted in a container with index
enabled (e.g.: to be able to resolve inotify watch file handles on it to
paths in CRIU), and this container is copied and started alongside with the
original one. This way the "copy" container can't have the same uuid on the
superblock and mounting the overlayfs from it later would fail.
That is an example of the problem on top of loop+ext4:
dd if=/dev/zero of=loopbackfile.img bs=100M count=10
losetup -fP loopbackfile.img
losetup -a
#/dev/loop0: [64768]:35 (/loop-test/loopbackfile.img)
mkfs.ext4 loopbackfile.img
mkdir loop-mp
mount -o loop /dev/loop0 loop-mp
mkdir loop-mp/{lower,upper,work,merged}
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
umount loop-mp/merged
umount loop-mp
e2fsck -f /dev/loop0
tune2fs -U random /dev/loop0
mount -o loop /dev/loop0 loop-mp
mount -t overlay overlay -oindex=on,lowerdir=loop-mp/lower,\
upperdir=loop-mp/upper,workdir=loop-mp/work loop-mp/merged
#mount: /loop-test/loop-mp/merged:
#mount(2) system call failed: Stale file handle.
If you just change the uuid of the backing filesystem, overlay is not
mounting any more. In Virtuozzo we copy container disks (ploops) when
create the copy of container and we require fs uuid to be unique for a new
container.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used in next patch to be able to change uuid checks and add
uuid nullification based on ofs->config.index for a new "uuid=off" mode.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of passing the xattr name down to the ovl_do_*xattr() accessor
functions, pass an enumerated value. The enum can use the same names as
the the previous #define for each xattr name.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the convention of calling ovl_do_foo() for operations which are overlay
specific.
This patch is a no-op, and will have significance for supporting
"user.overlay." xattr namespace.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We recently moved setting inode flag OVL_UPPERDATA to ovl_lookup().
When looking up an overlay dentry, upperdentry may be found by index
and not by name. In that case, we fail to read the metacopy xattr
and falsly set the OVL_UPPERDATA on the overlay inode.
This caused a regression in xfstest overlay/033 when run with
OVERLAY_MOUNT_OPTIONS="-o metacopy=on".
Fixes: 28166ab3c8 ("ovl: initialize OVL_UPPERDATA in ovl_lookup()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_check_origin outparam 'ctrp' argument not used by caller. So remove
this argument.
Signed-off-by: youngjun <her0gyugyu@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Negative dentries of upper layer are useless after construction of
overlayfs' own dentry and may keep in the memory long time even after
unmount of overlayfs instance. This patch tries to drop unnecessary
negative dentry of upper layer to effectively reclaim memory.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Amir pointed me to metacopy test cases in unionmount-testsuite and I
decided to run "./run --ov=10 --meta" and it failed while running test
"rename-mass-5.py".
Problem is w.r.t absolute redirect traversal on intermediate metacopy
dentry. We do not store intermediate metacopy dentries and also skip
current loop/layer and move onto lookup in next layer. But at the end of
loop, we have logic to reset "poe" and layer index if currnently looked up
dentry has absolute redirect. We skip all that and that means lookup in
next layer will fail.
Following is simple test case to reproduce this.
- mkdir -p lower upper work merged lower/a lower/b
- touch lower/a/foo.txt
- mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,metacopy=on none merged
# Following will create absolute redirect "/a/foo.txt" on upper/b/bar.txt.
- mv merged/a/foo.txt merged/b/bar.txt
# unmount overlay and use upper as lower layer (lower2) for next mount.
- umount merged
- mv upper lower2
- rm -rf work; mkdir -p upper work
- mount -t overlay -o lowerdir=lower2:lower,upperdir=upper,workdir=work,metacopy=on none merged
# Force a metacopy copy-up
- chown bin:bin merged/b/bar.txt
# unmount overlay and use upper as lower layer (lower3) for next mount.
- umount merged
- mv upper lower3
- rm -rf work; mkdir -p upper work
- mount -t overlay -o lowerdir=lower3:lower2:lower,upperdir=upper,workdir=work,metacopy=on none merged
# ls merged/b/bar.txt
ls: cannot access 'bar.txt': Input/output error
Intermediate lower layer (lower2) has metacopy dentry b/bar.txt with
absolute redirect "/a/foo.txt". We skipped redirect processing at the end
of loop which sets poe to roe and sets the appropriate next lower layer
index. And that means lookup failed in next layer.
Fix this by continuing the loop for any intermediate dentries. We still do
not save these at lower stack. With this fix applied unionmount-testsuite,
"./run --ov-10 --meta" now passes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently ovl_get_inode() initializes OVL_UPPERDATA flag and for that it
has to call ovl_check_metacopy_xattr() and check if metacopy xattr is
present or not.
yangerkun reported sometimes underlying filesystem might return -EIO and in
that case error handling path does not cleanup properly leading to various
warnings.
Run generic/461 with ext4 upper/lower layer sometimes may trigger the bug
as below(linux 4.19):
[ 551.001349] overlayfs: failed to get metacopy (-5)
[ 551.003464] overlayfs: failed to get inode (-5)
[ 551.004243] overlayfs: cleanup of 'd44/fd51' failed (-5)
[ 551.004941] overlayfs: failed to get origin (-5)
[ 551.005199] ------------[ cut here ]------------
[ 551.006697] WARNING: CPU: 3 PID: 24674 at fs/inode.c:1528 iput+0x33b/0x400
...
[ 551.027219] Call Trace:
[ 551.027623] ovl_create_object+0x13f/0x170
[ 551.028268] ovl_create+0x27/0x30
[ 551.028799] path_openat+0x1a35/0x1ea0
[ 551.029377] do_filp_open+0xad/0x160
[ 551.029944] ? vfs_writev+0xe9/0x170
[ 551.030499] ? page_counter_try_charge+0x77/0x120
[ 551.031245] ? __alloc_fd+0x160/0x2a0
[ 551.031832] ? do_sys_open+0x189/0x340
[ 551.032417] ? get_unused_fd_flags+0x34/0x40
[ 551.033081] do_sys_open+0x189/0x340
[ 551.033632] __x64_sys_creat+0x24/0x30
[ 551.034219] do_syscall_64+0xd5/0x430
[ 551.034800] entry_SYSCALL_64_after_hwframe+0x44/0xa9
One solution is to improve error handling and call iget_failed() if error
is encountered. Amir thinks that this path is little intricate and there
is not real need to check and initialize OVL_UPPERDATA in ovl_get_inode().
Instead caller of ovl_get_inode() can initialize this state. And this will
avoid double checking of metacopy xattr lookup in ovl_lookup() and
ovl_get_inode().
OVL_UPPERDATA is inode flag. So I was little concerned that initializing
it outside ovl_get_inode() might have some races. But this is one way
transition. That is once a file has been fully copied up, it can't go back
to metacopy file again. And that seems to help avoid races. So as of now
I can't see any races w.r.t OVL_UPPERDATA being set wrongly. So move
settingof OVL_UPPERDATA inside the callers of ovl_get_inode().
ovl_obtain_alias() already does it. So only two callers now left are
ovl_lookup() and ovl_instantiate().
Reported-by: yangerkun <yangerkun@huawei.com>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we use a variable "metacopy" which signifies that dentry could be
either uppermetacopy or lowermetacopy. Amir suggested that we can move
code around and use d.metacopy in such a way that we don't need
lowermetacopy and just can do away with uppermetacopy.
So this patch replaces "metacopy" with "uppermetacopy".
It also moves some code little higher to keep reading little simpler.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
overlayfs can keep index of copied up files and directories and it seems to
serve two primary puroposes. For regular files, it avoids breaking lower
hardlinks over copy up. For directories it seems to be used for various
error checks.
During ovl_lookup(), we lookup for index using lower dentry in many a
cases. That lower dentry is called "origin" and following is a summary of
current logic.
If there is no upperdentry, always lookup for index using lower dentry.
For regular files it helps avoiding breaking hard links over copyup and for
directories it seems to be just error checks.
If there is an upperdentry, then there are 3 possible cases.
- For directories, lower dentry is found using two ways. One is regular
path based lookup in lower layers and second is using ORIGIN xattr on
upper dentry. First verify that path based lookup lower dentry matches
the one pointed by upper ORIGIN xattr. If yes, use this verified origin
for index lookup.
- For regular files (non-metacopy), there is no path based lookup in lower
layers as lookup stops once we find upper dentry. So there is no origin
verification. If there is ORIGIN xattr present on upper, use that to
lookup index otherwise don't.
- For regular metacopy files, again lower dentry is found using path based
lookup as well as ORIGIN xattr on upper. Path based lookup is continued
in this case to find lower data dentry for metacopy upper. So like
directories we only use verified origin. If ORIGIN xattr is not present
(Either because lower did not support file handles or because this is
hardlink copied up with index=off), then don't use path lookup based
lower dentry as origin. This is same as regular non-metacopy file case.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Teach ovl_indexdir_cleanup() to remove temp directories containing
whiteouts to prepare for using index dir instead of work dir for removing
merge directories.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No reason to prevent upper layer being a remote filesystem. Do the
revalidation in that case, just as we already do for lower layers.
This lets virtiofs be used as upper layer, which appears to be a real use
case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow completely skipping ->revalidate() on a per-dentry basis, in case the
underlying layers used for a dentry do not themselves have ->revalidate().
E.g. negative overlay dentry has no underlying layers, hence revalidate is
unnecessary. Or if lower layer is remote but overlay dentry is pure-upper,
then can skip revalidate.
The following places need to update whether the dentry needs revalidate or
not:
- fill-super (root dentry)
- lookup
- create
- fh_to_dentry
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Following patch will allow remote as upper layer, but not overlay stacked
on upper layer. Separate the two concepts.
This patch is doesn't change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename lower_layers[] array to layers[], extend its size by one and
initialize layers[0] with upper layer values. Lower layers are now
addressed with index 1..numlower. layers[0] is reserved even with lower
only overlay.
[SzM: replace ofs->numlower with ofs->numlayer, the latter's value is
incremented by one]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXfNhGQAKCRDh3BK/laaZ
PGSEAP9Nyv3XCN2wdqMLdrgn07B3Pk9w2Unf3Y5amKOxNXqyQwEAy2/E6DCiGjSa
WRheJoTgDSeqUQNY6GFHsCIgLWOCHgs=
=WH5O
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix some bugs and documentation"
* tag 'ovl-fixes-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
docs: filesystems: overlayfs: Fix restview warnings
docs: filesystems: overlayfs: Rename overlayfs.txt to .rst
ovl: relax WARN_ON() on rename to self
ovl: fix corner case of non-unique st_dev;st_ino
ovl: don't use a temp buf for encoding real fh
ovl: make sure that real fid is 32bit aligned in memory
ovl: fix lookup failure on multi lower squashfs
Seprate on-disk encoding from in-memory and on-wire resresentation
of overlay file handle.
In-memory and on-wire we only ever pass around pointers to struct
ovl_fh, which encapsulates at offset 3 the on-disk format struct
ovl_fb. struct ovl_fb encapsulates at offset 21 the real file handle.
That makes sure that the real file handle is always 32bit aligned
in-memory when passed down to the underlying filesystem.
On-disk format remains the same and store/load are done into
correctly aligned buffer.
New nfs exported file handles are exported with aligned real fid.
Old nfs file handles are copied to an aligned buffer before being
decoded.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the past, overlayfs required that lower fs have non null uuid in
order to support nfs export and decode copy up origin file handles.
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of
lower fs") relaxed this requirement for nfs export support, as long
as uuid (even if null) is unique among all lower fs.
However, said commit unintentionally also relaxed the non null uuid
requirement for decoding copy up origin file handles, regardless of
the unique uuid requirement.
Amend this mistake by disabling decoding of copy up origin file handle
from lower fs with a conflicting uuid.
We still encode copy up origin file handles from those fs, because
file handles like those already exist in the wild and because they
might provide useful information in the future.
There is an unhandled corner case described by Miklos this way:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case bad_uuid won't be set for B, because the check only
involves the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We will deal with this corner case later.
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid ...")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We hit a BUG on kfree of an ERR_PTR()...
Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com
Fixes: 8b88a2e640 ("ovl: verify upper root dir matches lower root dir")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we seem to check redirect only if upperdentry is found. But it
is possible that there is no upperdentry but later we found an index.
We need to check redirect on index as well and set it in
ovl_inode->redirect. Otherwise link code can assume that dentry does not
have redirect and place a new one which breaks things. In my testing
overlay/033 test started failing in xfstests. Following are the details.
For example do following.
$ mkdir lower upper work merged
- Make lower dir with 4 links.
$ echo "foo" > lower/l0.txt
$ ln lower/l0.txt lower/l1.txt
$ ln lower/l0.txt lower/l2.txt
$ ln lower/l0.txt lower/l3.txt
- Mount with index on and metacopy on.
$ mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,\
index=on,metacopy=on none merged
- Link lower
$ ln merged/l0.txt merged/l4.txt
(This will metadata copy up of l0.txt and put an absolute redirect
/l0.txt)
$ echo 2 > /proc/sys/vm/drop/caches
$ ls merged/l1.txt
(Now l1.txt will be looked up. There is no upper dentry but there is
lower dentry and index will be found. We don't check for redirect on
index, hence ovl_inode->redirect will be NULL.)
- Link Upper
$ ln merged/l4.txt merged/l5.txt
(Lookup of l4.txt will use inode from l1.txt lookup which is still in
cache. It has ovl_inode->redirect NULL, hence link will put a new
redirect and replace /l0.txt with /l4.txt
- Drop caches.
echo 2 > /proc/sys/vm/drop_caches
- List l1.txt and it returns -ESTALE
$ ls merged/l0.txt
(It returns stale because, we found a metacopy of l0.txt in upper and it
has redirect l4.txt but there is no file named l4.txt in lower layer.
So lower data copy is not found and -ESTALE is returned.)
So problem here is that we did not process redirect on index. Check
redirect on index as well and then problem is fixed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we rely on path based lookup for data origin of metacopy upper.
This will work only if upper has not been renamed. We solved this problem
already for merged directories using redirect. Use same logic for metacopy
files.
This patch just goes on to check redirects for metacopy files.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move some directory related code in else block. This is pure code
reorganization and no functionality change.
Next patch enables redirect processing on metacopy files and needs this
change. By keeping non-functional changes in a separate patch, next patch
looks much smaller and cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_inode stores inode pointer for lower inode. This helps with
quickly getting lower inode given overlay inode (ovl_inode_lower()).
Now with metadata only copy-up, we can have metacopy inode in middle layer
as well and inode containing data can be different from ->lower. I need to
be able to open the real file in ovl_open_realfile() and for that I need to
quickly find the lower data inode.
Hence store lower data inode also in ovl_inode. Also provide an helper
ovl_inode_lowerdata() to access this field.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch modifies ovl_lookup() and friends to lookup metacopy dentries.
It also allows for presence of metacopy dentries in lower layer.
During lookup, check for presence of OVL_XATTR_METACOPY and if not present,
set OVL_UPPERDATA bit in flags.
We don't support metacopy feature with nfs_export. So in nfs_export code,
we set OVL_UPPERDATA flag set unconditionally if upper inode exists.
Do not follow metacopy origin if we find a metacopy only inode and metacopy
feature is not enabled for that mount. Like redirect, this can have
security implications where an attacker could hand craft upper and try to
gain access to file on lower which it should not have to begin with.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode->redirect is an inode property and should be initialized in
ovl_get_inode() only when we are adding a new inode to cache. If inode is
already in cache, it is already initialized and we should not be touching
ovl_inode->redirect field.
As of now this is not a problem as redirects are used only for directories
which don't share inode. But soon I want to use redirects for regular
files also and there it can become an issue.
Hence, move ->redirect initialization in ovl_get_inode().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_get_inode() right now has 5 parameters. Soon this patch series will
add 2 more and suddenly argument list starts looking too long.
Hence pass arguments to ovl_get_inode() in a structure and it looks
little cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, set i_ino value to the same value as st_ino for nfsd
readdirplus validator.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Al Viro