Unit node addresses should not have leading 0x:
Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In arch/mips/include/asm/prom.h, it should use "!CONFIG_USE_OF"
after #else and #endif.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
pgd page is freed by generic implementation pgd_free() since commit
f9cb654cb5 ("asm-generic: pgalloc: provide generic pgd_free()"),
however, there are scenarios that the system uses more than one page as
the pgd table, in such cases the generic implementation pgd_free() won't
be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and
MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER"
will be set as "1", which will cause allocating two pages as the pgd
table. Well, at the same time, the generic implementation pgd_free()
just free one pgd page, which will result in the memory leak.
The memory leak can be easily detected by executing shell command:
"while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"
Fixes: f9cb654cb5 ("asm-generic: pgalloc: provide generic pgd_free()")
Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_kmac().
Fixes: 9e21c7e40b ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes: 73b4390fb2 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
From: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Phil Sutter <n0-1@freewrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Daniel Walter <dwalter@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Unfortunately, Clang did not have support for "sp" as a global register
definition, and was crashing after the addition of current_stack_pointer.
This has been fixed in Clang 14, but earlier Clang versions need to
avoid this code, so add a versioned test and revert back to the
open-coded asm instances. Fixes Clang build error:
fatal error: error in backend: Invalid register name global variable
Fixes: 200ed341b8 ("mips: Implement "current_stack_pointer"")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/YikTQRql+il3HbrK@dev-arch.thelio-3990X
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Yanteng Si <siyanteng01@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As done with other image addresses in other architectures, use an
explicit flexible array instead of "address of char", which can trip
bounds checking done by the compiler. Found when building with
-Warray-bounds:
In file included from ./include/linux/byteorder/little_endian.h:5,
from ./arch/mips/include/uapi/asm/byteorder.h:15,
from ./arch/mips/include/asm/bitops.h:21,
from ./include/linux/bitops.h:33,
from ./include/linux/kernel.h:22,
from arch/mips/boot/compressed/decompress.c:13:
arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel':
./include/asm-generic/unaligned.h:14:8: warning: array subscript -1 is outside array bounds of 'unsigned char[1]' [-Warray-bounds]
14 | __pptr->x; \
| ~~~~~~^~~
./include/uapi/linux/byteorder/little_endian.h:35:51: note: in definition of macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
./include/asm-generic/unaligned.h:32:21: note: in expansion of macro '__get_unaligned_t'
32 | return le32_to_cpu(__get_unaligned_t(__le32, p));
| ^~~~~~~~~~~~~~~~~
arch/mips/boot/compressed/decompress.c:29:37: note: while referencing '__image_end'
29 | extern unsigned char __image_begin, __image_end;
| ^~~~~~~~~~~
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 2121aa3e23 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Newest Loongson-3 processors have moved to use LoongArch architecture.
Sadly, the LL/SC issue is still existing on both latest Loongson-3
processors using MIPS64 (Loongson-3A4000) and LoongArch
(Loongson-3A5000).
As it's very unlikely there will be new Loongson-3 processors using
MIPS64, let's stop people from false hoping.
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The platforms where the kernel should be loaded above 0x8000.0000 do not
support loading u-boot images, that doesn't mean that we shouldn't be
able to generate them.
Additionally, since commit 79876cc1d7 ("MIPS: new Kconfig option
ZBOOT_LOAD_ADDRESS"), the $(zload-y) variable was no longer hardcoded,
which made it impossible to use the uzImage.bin target.
Fixes: 79876cc1d7 ("MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It makes no sense to fall through to `break'. Therefore reorder the
switch statements so as to have the Cavium cases first, followed by the
default case, which improves readability and pacifies code analysis
tools. No change in semantics, assembly produced is exactly the same.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: bc431d2153 ("MIPS: Fix fall-through warnings for Clang")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Include the DECstation interrupt handler in opting out of
FPU support.
Fixes a linker error:
mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'
Fixes: 183b40f992 ("MIPS: Allow FP support to be disabled")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: linux-mips@vger.kernel.org
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
of_node_put(np) needs to be called when pdev == NULL.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To follow the existing per-arch conventions replace open-coded uses
of asm "sp" as "current_stack_pointer". This will let it be used in
non-arch places (like HARDENED_USERCOPY).
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yanteng Si <siyanteng01@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
I'm doing some thread necromancy of
https://lore.kernel.org/lkml/202007081624.82FA0CC1EA@keescook/
x86, arm64, and arm32 adjusted their READ_IMPLIES_EXEC logic to better
align with the safer defaults and the interactions with other mappings,
which I illustrated with this comment on x86:
/*
* An executable for which elf_read_implies_exec() returns TRUE will
* have the READ_IMPLIES_EXEC personality flag set automatically.
*
* The decision process for determining the results are:
*
* CPU: | lacks NX* | has NX, ia32 | has NX, x86_64 |
* ELF: | | | |
* ---------------------|------------|------------------|----------------|
* missing PT_GNU_STACK | exec-all | exec-all | exec-none |
* PT_GNU_STACK == RWX | exec-stack | exec-stack | exec-stack |
* PT_GNU_STACK == RW | exec-none | exec-none | exec-none |
*
* exec-all : all PROT_READ user mappings are executable, except when
* backed by files on a noexec-filesystem.
* exec-none : only PROT_EXEC user mappings are executable.
* exec-stack: only the stack and PROT_EXEC user mappings are
* executable.
*
* *this column has no architectural effect: NX markings are ignored by
* hardware, but may have behavioral effects when "wants X" collides with
* "cannot be X" constraints in memory permission flags, as in
* https://lkml.kernel.org/r/20190418055759.GA3155@mellanox.com
*
*/
For MIPS, the "lacks NX" above is the "!cpu_has_rixi" check. On x86,
we decided that the READ_IMPLIES_EXEC flag needed to reflect the
expectations, not the architectural behavior due to bad interactions
as noted above, as always returning "1" on non-NX hardware breaks
some mappings.
The other part of the issue is "what does the MIPS toolchain do for
PT_GNU_STACK?" The answer seems to be "by default, include PT_GNU_STACK,
but mark it executable" (likely due to concerns over non-NX hardware):
$ mipsel-linux-gnu-gcc -o hello_world hello_world.c
$ llvm-readelf -lW hellow_world | grep GNU_STACK
GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RWE 0x10
Given that older hardware doesn't support non-executable memory, it
seems safe to make the "PT_GNU_STACK is absent" logic mean "assume
non-executable", but this might break very old software running on
modern MIPS. This situation matches the ia32-on-x86_64 logic x86
uses (which assumes needing READ_IMPLIES_EXEC in that situation). But
modern toolchains on modern MIPS hardware should follow a safer default
(assume NX stack).
A follow-up to this change would be to switch the MIPS toolchain to emit
a non-executable PT_GNU_STACK, as this seems to be unneeded.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Juxin Gao <gaojuxin@loongson.cn>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of ar2315_pci_irq_domain_ops is to pass its address to
irq_domain_add_linear() which takes a pointer to const struct
irq_domain_ops. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of these structs is to pass their address to either
irq_domain_add_tree() or irq_domain_create_linear(), both which takes
pointers to const struct irq_domain_ops. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of these structs is to pass their address to either
irq_domain_add_tree() or irq_domain_create_linear(), both which takes
pointers to const struct irq_domain_ops. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The major part for workaround handling has already moved to config
options. This change replaces the remaining defines by already
available config options and gets rid of war.h
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This configuration is useful for boot testing malta_defconfig in QEMU
with just a simple cpio initrd, instead of a full ext4 rootfs.
This results in an increase of ~164KB of vmlinux (with GCC 11.2.0):
$ diskus vmlinux.before
11.19 MB (11,194,368 bytes)
$ diskus vmlinux.after
11.36 MB (11,358,208 bytes)
This size increase comes from the fact that usr/Kconfig is sourced when
CONFIG_BLK_DEV_INITRD is enabled, which defaults to supporting several
decompression algorithms for compressed initrds. This seems like a
reasonable tradeoff but these configurations could be disabled in the
future if there are complaints about the size increase.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch enables KCSAN for the 64-bit version. Updated rules
for the incompatible compilation units (vdso, boot/compressed).
Signed-off-by: Nemanja Rakovic <nemanja.rakovic@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This flag is not supported by clang, which results in a warning:
clang-14: warning: argument unused during compilation: '-mno-branch-likely' [-Wunused-command-line-argument]
This breaks cc-option, which adds -Werror to make this warning fatal and
catch flags that are not supported.
Wrap this flag in cc-option so that it does not cause cc-option to fail,
which can cause randconfigs to be really noisy, due to warnings not
getting disabled that should be.
Additionally, move the cc-option check to Kconfig so that the check is
done at configuration time, rather than build time, as builds with no
configuration change will be quicker because the cc-option call will not
need to happen in those instances.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This Makefile checks that GCC is 4.9 or newer, which is redundant after
commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1"), so cc-option can be removed.
Clang does not support -march=loongson3a so it needs to continue to use
-march=mips64r2, which no longer needs cc-option because all supported
clang versions recognize this flag.
-march=loonson3a can be used unconditionally with GCC because the
minimum supported GCC version has been bumped past 4.9.0, which won't
have the bug mentioned in the comment. The _MIPS_ISA macro redefinition
can be removed at the same time for the same reason.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Adds support for QCN550x, which appears to be very similar to QCA956x.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
fix regression introduced as part of moving to the new mount API.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmH7/AUACgkQ8vlZVpUN
gaOsuQf/TFH8QNBSeEkT5ybnrS51KGTv88mdUVMcsmSMhmAFxiGJLFtMLFu9LG7b
bJYCg+Q9Rieb1qqqtGNyLe4p3ewShSzBFu8p7hzKMfu0EEcrJwTYVywSX0oYhMMm
9o+V6CPcGYVZtImihdsmDvgMRRkzoevHQFx+OLhkaq4Qd9ZEdohchYIhRFNXwd+w
CJiL0TFAnrb4QfWgtq3HyY7aoQumf8YI15C+RTfykzCBhZRFRKXjVXPdIjfGe4O2
Fpjr4gSsgYK0Er0LLJvESeFFVpFz+NV7q9W/Vj5ahaKJDpiVGzL/OPZsnafzHPPy
CSa+iP3ZLcTb+KRTOZ1mgjvS34Cmyw==
=DpdZ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before creating the maps.
- Return error if procfs isn't mounted for PID namespaces when synthesizing records
for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid garbling the
screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part got into 5.17.
- Check for NULL pointer before dereference writing debug info about a sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYf/YRAAKCRCyPKLppCJ+
JxH/AQC27sHgz79DrCuA83CYEBRtzXuv0AJ/naVnUAOYm8OVKwEA5fxeJQj9Kiiw
46UIQ45fIxFAT448N9t2g61R6ZQw2g4=
=DUlE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
(Peter Zijlstra)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmH/vpgACgkQEsHwGGHe
VUqIGw/9EWg7Ek89BG9ZZui8EEDAzx3x0s/tyxiz0z18YfvtTnex5I87uJUYpw2s
hFhxxmGN+rwhcMGQDc0sDLLLxp170Yg0383N6OBBBMWPtNyxMWihBOHQgz8hQzbW
KtwoiBewmvAycHw0aoOtDMqFZTn5RToONnG9h7yV9rUIGKq75XNh72MBy9sCSE2F
w8lA3WWVTrv91YTPSMbsrm/tMC6eQCRiJGRMHTapxrWxkVu/H8O42pxJgS6dlo+h
vw025hXcf0KGBLzwVSHYdZg8jMn7uD2oSMh+wQ+Jy15XjKVWDfF1m3sA5S+zSJsS
THHtmqni5mF5xn0H7eOK9nYmRXR013zx6weo9miK4SN1pcoJq+PTNdSZOIwBm3Nh
eUXR/bXFYL0GGuPOk0QHA9AjqbCBPrkiw1nfppbJem2rrZ0uKHyKa8REVcVg/Xzy
e/nDy8I2y2bnwU9Ugk9BNWBRmn54Q2kb4/egmtLME6oYiqOXumQ4ZB/CmwRaSwxG
bB99/tBKblrWSA6wcgATkqYFSg4ZJniDxKipnrEYX8ePkGODKHoIQS4EUyjxuPW/
fO2G4Oe8aO/qYS/yei8XcubyEFaSPyUo+th+ZiPODCt15JKzQCAxeOYxqnEI4I4s
5afDBmAo47bs9Eem7GRjZOgrDOP88+lISZ1rZidp5paDwWAmL2E=
=0tH5
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Intel/PT: filters could crash the kernel
- Intel: default disable the PMU for SMM, some new-ish EFI firmware has
started using CPL3 and the PMU CPL filters don't discriminate against
SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
cycles.
- Fixup for perf_event_attr::sig_data
* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix crash with stop filters in single-range mode
perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
selftests/perf_events: Test modification of perf_event_attr::sig_data
perf: Copy perf_event_attr::sig_data on modification
x86/perf: Default set FREEZE_ON_SMI for all
from platform_get_irq() so that deferred probing still works
-----BEGIN PGP SIGNATURE-----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=BPlD
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.
Fixes: 53be502822 ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Picking the changes from:
06feec6005 ("ASoC: hdmi-codec: Fix OOB memory accesses")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/Yf+6OT+2eMrYDEeX@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211225005558.503935-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf recording, it retrieves process info by iterating nodes in proc
fs. If we run perf in a non-root PID namespace with command:
# unshare --fork --pid perf record -e cycles -a -- test_program
... in this case, unshare command creates a child PID namespace and
launches perf tool in it, but the issue is the proc fs is not mounted
for the non-root PID namespace, this leads to the perf tool gathering
process info from its parent PID namespace.
We can use below command to observe the process nodes under proc fs:
# unshare --pid --fork ls /proc
1 137 1968 2128 3 342 48 62 78 crypto kcore net uptime
10 138 2 2142 30 35 49 63 8 devices keys pagetypeinfo version
11 139 20 2143 304 36 50 64 82 device-tree key-users partitions vmallocinfo
12 14 2011 22 305 37 51 65 83 diskstats kmsg self vmstat
128 140 2038 23 307 39 52 656 84 driver kpagecgroup slabinfo zoneinfo
129 15 2074 24 309 4 53 67 9 execdomains kpagecount softirqs
13 16 2094 241 31 40 54 68 asound fb kpageflags stat
130 164 2096 242 310 41 55 69 buddyinfo filesystems loadavg swaps
131 17 2098 25 317 42 56 70 bus fs locks sys
132 175 21 26 32 43 57 71 cgroups interrupts meminfo sysrq-trigger
133 179 2102 263 329 44 58 75 cmdline iomem misc sysvipc
134 1875 2103 27 330 45 59 76 config.gz ioports modules thread-self
135 19 2117 29 333 46 6 77 consoles irq mounts timer_list
136 1941 2121 298 34 47 60 773 cpuinfo kallsyms mtd tty
So it shows many existed tasks, since unshared command has not mounted
the proc fs for the new created PID namespace, it still accesses the
proc fs of the root PID namespace. This leads to two prominent issues:
- Firstly, PID values are mismatched between thread info and samples.
The gathered thread info are coming from the proc fs of the root PID
namespace, but samples record its PID from the child PID namespace.
- The second issue is profiled program 'test_program' returns its forked
PID number from the child PID namespace, perf tool wrongly uses this
PID number to retrieve the process info via the proc fs of the root
PID namespace.
To avoid issues, we need to mount proc fs for the child PID namespace
with the option '--mount-proc' when use unshare command:
# unshare --fork --pid --mount-proc perf record -e cycles -a -- test_program
Conversely, when the proc fs of the root PID namespace is used by child
namespace, perf tool can detect the multiple PID levels and
nsinfo__is_in_root_namespace() returns false, this patch reports error
for this case:
# unshare --fork --pid perf record -e cycles -a -- test_program
Couldn't synthesize bpf events.
Perf runs in non-root PID namespace but it tries to gather process info from its parent PID namespace.
Please mount the proc file system properly, e.g. add the option '--mount-proc' for unshare command.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20211224124014.2492751-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move NULL pointer check before dereferencing the variable.
Addresses-Coverity: 1497622 ("Derereference before null check")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ameer Hamza <amhamza.mgc@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/r/20220125121141.18347-1-amhamza.mgc@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stderr should be set to a pipe when using TUI. Otherwise it'd
print to stdout and break TUI windows with an error message.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220202070828.143303-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This updates branch sample type with missing PERF_SAMPLE_BRANCH_TYPE_SAVE.
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/1643799443-15109-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
f6c6804c43 ("kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yf+4k5Fs5Q3HdSG9@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To check if more kernel API sync is needed and also to see if the perf
build tests continue to pass.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYf5Y3AAKCRCAXGG7T9hj
vmfRAP9dBr4LfnfLkY+If70xAVdcImOjK7NzTYCaWAFF1evmJgEAueEWUrV7hJQq
HYiLXPWFsr5eqnzlcWwLPaBxFH+uIAY=
=Jxjf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
Krzysztof Kozlowski