The dirty log perf test will time verious dirty logging operations
(enabling dirty logging, dirtying memory, getting the dirty log,
clearing the dirty log, and disabling dirty logging) in order to
quantify dirty logging performance. This test can be used to inform
future performance improvements to KVM's dirty logging infrastructure.
This series was tested by running the following invocations on an Intel
Skylake machine:
dirty_log_perf_test -b 20m -i 100 -v 64
dirty_log_perf_test -b 20g -i 5 -v 4
dirty_log_perf_test -b 4g -i 5 -v 32
demand_paging_test -b 20m -v 64
demand_paging_test -b 20g -v 4
demand_paging_test -b 4g -v 32
All behaved as expected.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201027233733.1484855-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the clear_dirty_log test, instead merge it into the existing
dirty_log_test. It should be cleaner to use this single binary to do
both tests, also it's a preparation for the upcoming dirty ring test.
The default behavior will run all the modes in sequence.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201001012233.6013-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for the SVE registers to get-reg-list and create a
new test, get-reg-list-sve, which tests them when running on a
machine with SVE support.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-5-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for KVM_GET_REG_LIST regressions. The blessed list was
created by running on v4.15 with the --core-reg-fixup option.
The following script was also used in order to annotate system
registers with their names when possible. When new system
registers are added the names can just be added manually using
the same grep.
while read reg; do
if [[ ! $reg =~ ARM64_SYS_REG ]]; then
printf "\t$reg\n"
continue
fi
encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//")
if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then
printf "\t$reg\n"
continue
fi
name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//")
printf "\t$reg\t/* $name */\n"
done < <(aarch64/get-reg-list --core-reg-fixup --list)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-3-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a set of tests that ensure the guest cannot access paravirtual msrs
and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf.
Expect a #GP in the case of msr accesses and -KVM_ENOSYS from
hypercalls.
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20201027231044.655110-7-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the infrastructure needed to enable exception handling in selftests.
This allows any of the exception and interrupt vectors to be overridden
in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20201012194716.3950330-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a regression test for commit 671ddc700f ("KVM: nVMX: Don't leak
L1 MMIO regions to L2").
First, check to see that an L2 guest can be launched with a valid
APIC-access address that is backed by a page of L1 physical memory.
Next, set the APIC-access address to a (valid) L1 physical address
that is not backed by memory. KVM can't handle this situation, so
resuming L2 should result in a KVM exit for internal error
(emulation).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201026180922.3120555-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM special-cases writes to MSR_IA32_TSC so that all CPUs have
the same base for the TSC. This logic is complicated, and we
do not want it to have any effect once the VM is started.
In particular, if any guest started to synchronize its TSCs
with writes to MSR_IA32_TSC rather than MSR_IA32_TSC_ADJUST,
the additional effect of kvm_write_tsc code would be uncharted
territory.
Therefore, this patch makes writes to MSR_IA32_TSC behave
essentially the same as writes to MSR_IA32_TSC_ADJUST when
they come from the guest. A new selftest (which passes
both before and after the patch) checks the current semantics
of writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST originating
from both the host and the guest.
Upcoming work to remove the special side effects
of host-initiated writes to MSR_IA32_TSC and MSR_IA32_TSC_ADJUST
will be able to build onto this test, adjusting the host side
to use the new APIs and achieve the same effect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have the ability to handle MSRs from user space and also to
select which ones we do want to prevent in-kernel KVM code from handling,
let's add a selftest to show case and verify the API.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20200925143422.21718-9-graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marcelo reports that kvm selftests fail to build with
"make ARCH=x86_64":
gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99
-fno-stack-protector -fno-PIE -I../../../../tools/include
-I../../../../tools/arch/x86_64/include -I../../../../usr/include/
-Iinclude -Ilib -Iinclude/x86_64 -I.. -c lib/kvm_util.c
-o /var/tmp/20200604202744-bin/lib/kvm_util.o
In file included from lib/kvm_util.c:11:
include/x86_64/processor.h:14:10: fatal error: asm/msr-index.h: No such
file or directory
#include <asm/msr-index.h>
^~~~~~~~~~~~~~~~~
compilation terminated.
"make ARCH=x86", however, works. The problem is that arch specific headers
for x86_64 live in 'tools/arch/x86/include', not in
'tools/arch/x86_64/include'.
Fixes: 66d69e081b ("selftests: fix kvm relocatable native/cross builds and installs")
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200605142028.550068-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a nested VM with a VMX-preemption timer is migrated, verify that the
nested VM and its parent VM observe the VMX-preemption timer exit close to
the original expiration deadline.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200526215107.205814-3-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.
For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.
UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.
TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.
In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.
The following use-cases work with this change:
Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
INSTALL_PATH=$HOME/x86_64
arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- defconfig
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-
s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- defconfig
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all
No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make set_memory_region_test available on all architectures by wrapping
the bits that are x86-specific in ifdefs. A future testcase
to create the maximum number of memslots will be architecture
agnostic.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The steal-time test confirms what is reported to the guest as stolen
time is consistent with the run_delay reported for the VCPU thread
on the host. Both x86_64 and AArch64 have the concept of steal/stolen
time so this test is introduced for both architectures.
While adding the test we ensure .gitignore has all tests listed
(it was missing s390x/resets) and that the Makefile has all tests
listed in alphabetical order (not really necessary, but it almost
was already...). We also extend the common API with a new num-guest-
pages call and a new timespec call.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM selftest to test moving the base gfn of a userspace memory
region. Although the basic concept of moving memory regions is not x86
specific, the assumptions regarding large pages and MMIO shenanigans
used to verify the correctness make this x86_64 only for the time being.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to allow the demand paging test to work on larger and
smaller guest sizes.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Rewrote parse_size() to simplify and provide user more flexibility as
to how sizes are input. Also fixed size overflow assert.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While userfaultfd, KVM's demand paging implementation, is not specific
to KVM, having a benchmark for its performance will be useful for
guiding performance improvements to KVM. As a first step towards creating
a userfaultfd demand paging test, create a simple memory access test,
based on dirty_log_test.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
L2 guest calls vmcall and L1 checks the exit status does
correspond.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the basic infrastructure needed to test AMD nested SVM.
This is largely copied from the KVM unit test infrastructure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test if the registers end up having the correct values after a normal,
initial and clear reset.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The kernel's version of msr-index.h was pulled wholesale into tools by
commit
444e2ff34d ("tools arch x86: Grab a copy of the file containing the MSR numbers"),
Use the common msr-index.h instead of manually redefining everything in
a KVM-only header.
Note, a few MSR-related definitions remain in processor.h because they
are not covered by msr-index.h, including the awesomely named
APIC_BASE_MSR, which refers to starting index of the x2APIC MSRs, not
the actual MSR_IA32_APICBASE, which *is* defined by msr-index.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-3-sean.j.christopherson@intel.com
Ensure that IA32_XSS appears in KVM_GET_MSR_INDEX_LIST if it can be set
to a non-zero value.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: Ia2d644f69e2d6d8c27d7e0a7a45c2bf9c42bf5ff
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following build error from "make TARGETS=kvm kselftest":
libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
This error is seen when build is done from the main Makefile using
kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
are defined.
When build is invoked using:
"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
aren't defined.
There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the
check to determine if --no-pie is necessary, which is the case when these
two aren't defined when "make -C tools/testing/selftests/kvm" runs.
Fix it by simplifying the no-pie-option logic. With this change, both
build variations work.
"make TARGETS=kvm kselftest"
"make -C tools/testing/selftests/kvm"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.
Most of the patch is really adding EPT support to the testing
framework.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that we can write and read the guest memory with this s390x
ioctl, and that some error cases are handled correctly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829130732.580-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To run the dirty_log_test on s390x, we have to make sure that we
access the dirty log bitmap with little endian byte ordering and
we have to properly align the memslot of the guest.
Also all dirty bits of a segment are set once on s390x when one
of the pages of a segment are written to for the first time, so
we have to make sure that we touch all pages during the first
iteration to keep the test in sync here.
DEFAULT_GUEST_TEST_MEM needs an adjustment, too. On some s390x
distributions, the ELF binary is linked to address 0x80000000,
so we have to avoid that our test region overlaps into this area.
0xc0000000 seems to be a good alternative that should work on x86
and aarch64, too.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-4-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On s390x, we can neither exit via PIO nor MMIO, but have to use an
instruction like DIAGNOSE. Now that ucall() is implemented, we can
use it in the sync_reg_test on s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-3-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The way we exit from a guest to userspace is very specific to the
architecture: On x86, we use PIO, on aarch64 we are using MMIO and on
s390x we're going to use an instruction instead. The possibility to
select a type via the ucall_type_t enum is currently also completely
unused, so the code in ucall.c currently looks more complex than
required. Let's split this up into architecture specific ucall.c
files instead, so we can get rid of the #ifdefs and the unnecessary
ucall_type_t handling.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20190731151525.17156-2-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is the initial implementation for KVM selftests on s390.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=STwX
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: add kselftests
This is the initial implementation for KVM selftests on s390.
When running with /sys/module/kvm_intel/parameters/unrestricted_guest=N,
test that a kernel warning does not occur informing us that
vcpu->mmio_needed=1. This can happen when KVM_RUN is called after a
triple fault.
This test was made to detect a bug that was reported by Syzkaller
(https://groups.google.com/forum/#!topic/syzkaller/lHfau8E3SOE) and
fixed with commit bbeac2830f ("KVM: X86: Fix residual mmio emulation
request to userspace").
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid testcase failures we need to enable the pgstes. This can be
done with /proc/sys/vm/allocate_pgste or with a linker option that
creates an S390_PGSTE program header.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Fixed as outlined by kernel test robot <rong.a.chen@intel.com>]
There is nothing x86-specific in the test apart from the VM_MODE_P52V48_4K
which we can now replace with VM_MODE_DEFAULT. Thus let's move the file to
the main folder and enable it for aarch64 and s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-10-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The test is an adaption of the same test for x86. Note that there
are some differences in the way how s390x deals with the kvm_valid_regs
in struct kvm_run, so some of the tests had to be removed. Also this
test is not using the ucall() interface on s390x yet (which would need
some work to be usable on s390x), so it simply drops out of the VM with
a diag 0x501 breakpoint instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-8-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Code that takes care of basic CPU setup, page table walking, etc.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-7-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
merge window, but should not wait four months before they appear in
a release. I also travelled a bit more than usual in the first part
of May, which didn't help with picking up patches and reports promptly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc6RkmAAoJEL/70l94x66DhEAH/ijCkibV9vOUu8n/lSxMjAzi
I/Y1VEaVRFuQ6u0QSjWBBg22tVsWuWiVbonJ63w3JMRwi5Q5zW9REE7EaKRAa/eC
FiFE7vTesYh6sGVwdMCwoinjMDyCp7hybvtBc608+MWhVmrdzTYtPm5N85wxIDtW
xH5Kr2mVeLC43X3vfegolmXZ1obAbZEToJvOgJrYFhnzsmVYYl182kfGtrppBoO0
XXDPuDRGpTrm6A2oADMdOv+mT9p51pHsedmHQaDGXwAGEC/BkOGKdIdBfwppEwy7
QP2NGqwkHIyghV1aCPacT6O6G6xL0i2rfvlJ7+e6o7deU4uMXAqIdQ2DbIcHy3g=
=5IW2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
So far the KVM selftests are compiled without any compiler warnings
enabled. That's quite bad, since we miss a lot of possible bugs this
way. Let's enable at least "-Wall" and some other useful warning flags
now, and fix at least the trivial problems in the code (like unused
variables).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tests for KVM_SET_NESTED_STATE and for various code paths in its implementation in vmx_set_nested_state().
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a simple test for SMM, based on VMX. The test implements its own
sync between the guest and the host as using our ucall library seems to
be too cumbersome: SMI handler is happening in real-address mode.
This patch also fixes KVM_SET_NESTED_STATE to happen after
KVM_SET_VCPU_EVENTS, in fact it places it last. This is because
KVM needs to know whether the processor is in SMM or not.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-no-pie was added to GCC at the same time as their configuration option
--enable-default-pie. Compilers that were built before do not have
-no-pie, but they also do not need it. Detect the option at build
time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since 4.8.3, gcc has enabled -fstack-protector by default. This is
problematic for the KVM selftests as they do not configure fs or gs
segments (the stack canary is pulled from fs:0x28). With the default
behavior, gcc will insert a stack canary on any function that creates
buffers of 8 bytes or more. As a result, ucall() will hit a triple
fault shutdown due to reading a bad fs segment when inserting its
stack canary, i.e. every test fails with an unexpected SHUTDOWN.
Fixes: 14c47b7530 ("kvm: selftests: introduce ucall")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM selftests embed the guest "image" as a function in the test itself
and extract the guest code at runtime by manually parsing the elf
headers. The parsing is very simple and doesn't supporting fancy things
like position independent executables. Recent versions of gcc enable
pie by default, which results in triple fault shutdowns in the guest due
to the virtual address in the headers not matching up with the virtual
address retrieved from the function pointer.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a simple (and stupid) hyperv_cpuid test: check that we got the
expected number of entries with and without Enlightened VMCS enabled
and that all currently reserved fields are zeroed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon