Treat "block_count" from struct f2fs_super_block as 64-bit little endian
value in sanity_check_raw_super() because struct f2fs_super_block
declares "block_count" as "__le64".
This fixes a bug where the superblock validation fails on big endian
devices with the following error:
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock
As result of this the partition cannot be mounted.
With this patch applied the superblock validation works fine and the
partition can be mounted again:
F2FS-fs (sda1): Mounted with checkpoint version = 7c84
My little endian x86-64 hardware was able to mount the partition without
this fix.
To confirm that mounting f2fs filesystems works on big endian machines
again I tested this on a 32-bit MIPS big endian (lantiq) device.
Fixes: 0cfe75c5b0 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user change inode's i_flags via ioctl, let's add it into global
dirty list, so that checkpoint can guarantee its persistence before
fsync, it can make checkpoint keeping strong consistency.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The union in struct extent_node wass only to indicate below fields
struct rb_node rb_node;
union {
struct {
unsigned int fofs;
unsigned int len;
...
...
can be parsed as fields in struct rb_entry, but they were never be
used explicitly before, so let's remove them for cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Should use lstart (logical start address) instead of start (in dev) here.
This fixes a bug in multi-device scenarios.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When there is a failure in f2fs_fill_super() after/during
the recovery of fsync'd nodes, it frees the current sbi and
retries again. This time the mount is successful, but the files
that got recovered before retry, still holds the extent tree,
whose extent nodes list is corrupted since sbi and sbi->extent_list
is freed up. The list_del corruption issue is observed when the
file system is getting unmounted and when those recoverd files extent
node is being freed up in the below context.
list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
<...>
kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
lr : __list_del_entry_valid+0x94/0xb4
pc : __list_del_entry_valid+0x94/0xb4
<...>
Call trace:
__list_del_entry_valid+0x94/0xb4
__release_extent_node+0xb0/0x114
__free_extent_tree+0x58/0x7c
f2fs_shrink_extent_tree+0xdc/0x3b0
f2fs_leave_shrinker+0x28/0x7c
f2fs_put_super+0xfc/0x1e0
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78
__cleanup_mnt+0x1c/0x28
task_work_run+0x48/0xd0
do_notify_resume+0x678/0xe98
work_pending+0x8/0x14
Fix this by not creating extents for those recovered files if shrinker is
not registered yet. Once mount is successful and shrinker is registered,
those files can have extents again.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up checkpoint flow a bit:
- remove unneeded circulation of flushing meta pages.
- don't flush nat_bits pages in prior to other checkpoint pages.
- add bug_on to check remained meta pages after flushing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes, I could observe # of issuing_discard to be 1 which blocks background
jobs due to is_idle()=false.
The only way to get out of it was to trigger gc_urgent. This patch avoids that
by checking any candidates as done in the list.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One report says memalloc failure during mount.
(unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14)
(show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0)
(dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160)
(warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0)
(__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120)
(kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688)
(build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc)
(f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188)
(mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20)
(f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c)
(mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134)
(vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4)
(do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc)
(SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48)
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 089842de ("f2fs: remove codes of unused wio_mutex") removes codes
of unused wio_mutex, but missing the comment, so delete it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reorders flow from
- update page
- set_page_dirty
- wait_on_page_writeback
to
- wait_on_page_writeback
- update page
- set_page_dirty
The reason is:
- set_page_dirty will increase reference of dirty page, the reference
should be cleared before wait_on_page_writeback to keep its consistency.
- some devices need stable page during page writebacking, so we
should not change page's data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If IPU failed, nothing is commited, we should end page writeback.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This adds an option in ioctl(F2FS_IOC_SHUTDOWN) in order to trigger fsck by
setting a NEED_FSCK flag.
Generally, shutdown is used for the test to validate filesystem consistency, and
setting NEED_FSCK flag can be used for Android to trigger fsck.f2fs at boot time
explicitly so that we could measure the elapsed time as well as force filesystem
check.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we want to re-enable nat_bits, we rely on fsck which requires full scan
of directory tree. Let's do that by regular fsck or unclean shutdown.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we added a parameter @map.m_may_create to trigger OPU
allocation and call f2fs_balance_fs() correctly.
But in get_more_blocks(), @create has been overwritten by below code.
So the function f2fs_map_blocks() will not allocate new block address
but directly go out. Meanwile,there are several functions calling
f2fs_map_blocks() directly and @map.m_may_create not initialized.
CODE:
create = dio->op == REQ_OP_WRITE;
if (dio->flags & DIO_SKIP_HOLES) {
if (fs_startblk <= ((i_size_read(dio->inode) - 1) >>
i_blkbits))
create = 0;
}
This patch fixes it.
Signed-off-by: Jia Zhu <zhujia13@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we allocated a new block address for OPU mode in direct_IO.
But the new address couldn't be assigned to @map->m_pblk correctly.
This patch fix it.
Cc: <stable@vger.kernel.org>
Fixes: 511f52d02f05 ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Jia Zhu <zhujia13@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adjust the trace print in f2fs_get_victim() to cover GC done by
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Allow node type segments also to be GC'd via f2fs ioctl
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The function truncate_node frees the page with f2fs_put_page. However,
the page index is read after that. So, the patch reads the index before
freeing the page.
Fixes: bf39c00a9a ("f2fs: drop obsolete node page when it is truncated")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create()
should return -EIO instead of -ENOMEM, this patch makes it consistent
with posix_acl_create() which has been fixed in commit beaf226b86
("posix_acl: don't ignore return value of posix_acl_create_masq()").
Fixes: 83dfe53c18 ("f2fs: fix reference leaks in f2fs_acl_create")
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After merging the f2fs tree, today's linux-next build
(x86_64_allmodconfig) produced this warning:
In file included from fs/f2fs/dir.c:11:
fs/f2fs/f2fs.h: In function '__mark_inode_dirty_flag':
fs/f2fs/f2fs.h:2388:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (set)
^
fs/f2fs/f2fs.h:2390:2: note: here
case FI_DATA_EXIST:
^~~~
Exposed by my use of -Wimplicit-fallthrough
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The following race could lead to inconsistent SIT bitmap:
Task A Task B
====== ======
f2fs_write_checkpoint
block_operations
f2fs_lock_all
down_write(node_change)
down_write(node_write)
... sync ...
up_write(node_change)
f2fs_file_write_iter
set_inode_flag(FI_NO_PREALLOC)
......
f2fs_write_begin(index=0, has inline data)
prepare_write_begin
__do_map_lock(AIO) => down_read(node_change)
f2fs_convert_inline_page => update SIT
__do_map_lock(AIO) => up_read(node_change)
f2fs_flush_sit_entries <= inconsistent SIT
finish write checkpoint
sudden-power-off
If SPO occurs after checkpoint is finished, SIT bitmap will be set
incorrectly.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If namelen is corrupted to have very long value, fill_dentries can copy
wrong memory area.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, when f2fs finds which temp bio cache owns the target page,
it will flush all the three temp bio caches, but we only need to flush
one single bio cache indeed, which can help to keep bio merged.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In get_more_blocks(), we may override @create as below code:
create = dio->op == REQ_OP_WRITE;
if (dio->flags & DIO_SKIP_HOLES) {
if (fs_startblk <= ((i_size_read(dio->inode) - 1) >>
i_blkbits))
create = 0;
}
But in f2fs_map_blocks(), we only trigger f2fs_balance_fs() if @create
is 1, so in LFS mode, dio overwrite under LFS mode can easily run out
of free segments, result in below panic.
Call Trace:
allocate_segment_by_default+0xa8/0x270 [f2fs]
f2fs_allocate_data_block+0x1ea/0x5c0 [f2fs]
__allocate_data_block+0x306/0x480 [f2fs]
f2fs_map_blocks+0x6f6/0x920 [f2fs]
__get_data_block+0x4f/0xb0 [f2fs]
get_data_block_dio_write+0x50/0x60 [f2fs]
do_blockdev_direct_IO+0xcd5/0x21e0
__blockdev_direct_IO+0x3a/0x3c
f2fs_direct_IO+0x1ff/0x4a0 [f2fs]
generic_file_direct_write+0xd9/0x160
__generic_file_write_iter+0xbb/0x1e0
f2fs_file_write_iter+0xaf/0x220 [f2fs]
__vfs_write+0xd0/0x130
vfs_write+0xb2/0x1b0
SyS_pwrite64+0x69/0xa0
? vtime_user_exit+0x29/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
RIP: new_curseg+0x36f/0x380 [f2fs] RSP: ffffac570393f7a8
So this patch introduces a parameter map.m_may_create to indicate that
f2fs_map_blocks() is called from write or read path, which can give the
right hint to let f2fs_map_blocks() trigger OPU allocation and call
f2fs_balanc_fs() correctly.
BTW, it disables physical address preallocation for direct IO in
f2fs_preallocate_blocks, which is redundant to OPU allocation of
f2fs_map_blocks.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_dio_submit_bio() to hook submit_io/end_io functions
in direct IO path, in order to account DIO.
Later, we will add this count into is_idle() to let background GC/Discard
thread be aware of DIO.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch move dir data flush to write checkpoint process, by
doing this, it may reduce some time for dir fsync.
pre:
-f2fs_do_sync_file enter
-file_write_and_wait_range <- flush & wait
-write_checkpoint
-do_checkpoint <- wait all
-f2fs_do_sync_file exit
now:
-f2fs_do_sync_file enter
-write_checkpoint
-block_operations <- flush dir & no wait
-do_checkpoint <- wait all
-f2fs_do_sync_file exit
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_ioc_gc_range skips blocks_per_seg each time, however, f2fs_gc moves
blocks of section each time, so fix it from segment to section.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add one sysfs entry to control migration granularity of GC in large
section f2fs, it can be tuned to mitigate heavy overhead of migrating
huge number of blocks in large section.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Section is minimal garbage collection unit of f2fs, in zoned block
device, or ancient block mapping flash device, in order to improve
GC efficiency, we can align GC unit to lower device erase unit,
normally, it consists of multiple of segments.
Once background or foreground GC triggers, it brings a large number
of IOs, which will impact user IO, and also occupy cpu/memory resource
intensively.
So, to reduce impact of GC on large size section, this patch supports
subsectional GC, in one cycle of GC, it only migrate partial segment{s}
in victim section. Currently, by default, we use sbi->segs_per_sec as
migration granularity.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a wrapper __is_large_section() to clean up codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to
access .raw_super field, to avoid unneeded pointer conversion, this
patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly.
Just do cleanup, no logic change.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When sbi->segs_per_sec > 1, and if some segno has 0 valid blocks before
gc starts, do_garbage_collect will skip counting seg_freed++, and this
will cause seg_freed < sbi->segs_per_sec and finally skip sec_freed++.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we only account preflush command for flush_merge mode,
so for noflush_merge mode, we can not know in-flight preflush
command count, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The encrypted file may be corrupted by GC in following case:
Time 1: | segment 1 blkaddr = A | GC -> | segment 2 blkaddr = B |
Encrypted block 1 is moved from blkaddr A of segment 1 to blkaddr B of
segment 2,
Time 2: | segment 1 blkaddr = B | GC -> | segment 3 blkaddr = C |
Before page 1 is written back and if segment 2 become a victim, then
page 1 is moved from blkaddr B of segment 2 to blkaddr Cof segment 3,
during the GC process of Time 2, f2fs should wait for page 1 written back
before reading it, or move_data_block will read a garbage block from
blkaddr B since page is not written back to blkaddr B yet.
Commit 6aa58d8a ("f2fs: readahead encrypted block during GC") introduce
ra_data_block to read encrypted block, but it forgets to add
f2fs_wait_on_page_writeback to avoid racing between GC and flush.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
This patch does below changes to keep consistence of project quota data
in sudden power-cut case:
- update inode.i_projid and project quota atomically under lock_op() in
f2fs_ioc_setproject()
- recover inode.i_projid and project quota in recover_inode()
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Direct IO can be used in case of hardware encryption. The following
scenario results into data corruption issue in this path -
Thread A - Thread B-
-> write file#1 in direct IO
-> GC gets kicked in
-> GC submitted bio on meta mapping
for file#1, but pending completion
-> write file#1 again with new data
in direct IO
-> GC bio gets completed now
-> GC writes old data to the new
location and thus file#1 is
corrupted.
Fix this by submitting and waiting for pending io on meta mapping
for direct IO case in f2fs_map_blocks().
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +a /mnt/f2fs/file
6. xfs_io -a /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. xfs_io /mnt/f2fs/file
There is no error when opening this file w/o O_APPEND, but actually,
we expect the correct result should be:
/mnt/f2fs/file: Operation not permitted
The root cause is, in recover_inode(), we recover inode->i_flags more
than F2FS_I(inode)->i_flags, so fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes codes as below:
- use f2fs_set_inode_flags() to update i_flags atomically to avoid
potential race.
- synchronize F2FS_I(inode)->i_flags to inode->i_flags in
f2fs_new_inode().
- use f2fs_set_inode_flags() to simply codes in f2fs_quota_{on,off}.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to drop PG_checked flag on page as well when we clear PG_uptodate
flag, in order to avoid treating the page as GCing one later.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 66110abc4c.
If we clear the cold data flag out of the writeback flow, we can miscount
-1 by end_io, which incurs a deadlock caused by all I/Os being blocked during
heavy GC.
Balancing F2FS Async:
- IO (CP: 1, Data: -1, Flush: ( 0 0 1), Discard: ( ...
GC thread: IRQ
- move_data_page()
- set_page_dirty()
- clear_cold_data()
- f2fs_write_end_io()
- type = WB_DATA_TYPE(page);
here, we get wrong type
- dec_page_count(sbi, type);
- f2fs_wait_on_page_writeback()
Cc: <stable@vger.kernel.org>
Reported-and-Tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds issued read IO counts which is under block layer.
Chao modified a bit, since:
Below race can cause reversed reference on F2FS_RD_DATA, there is
the same issue in f2fs_submit_page_bio(), fix them by relocate
__submit_bio() and inc_page_count.
Thread A Thread B
- f2fs_write_begin
- f2fs_submit_page_read
- __submit_bio
- f2fs_read_end_io
- __read_end_io
- dec_page_count(, F2FS_RD_DATA)
- inc_page_count(, F2FS_RD_DATA)
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Martin Blumenstingl