Provide a public callback handle_mask_sync() that drivers can use when
they have more complex IRQ masking logic. The default implementation is
regmap_irq_handle_mask_sync(), used if the chip doesn't provide its own
callback.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/e083474b3d467a86e6cb53da8072de4515bd6276.1669100542.git.william.gray@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
With the dawn of MMIO gpio-regmap users, it is desirable to let
gpio-regmap ask the regmap if it might sleep during an access so
it can pass that information to gpiochip. Add a new regmap_might_sleep()
to query the regmap.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20221121150843.1562603-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit faa87ce919 ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1b ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:
[ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 39.200006] Call trace:
[ 39.200014] regmap_irq_set_type+0x84/0x1c0
[ 39.200026] __irq_set_trigger+0x60/0x1c0
[ 39.200040] __setup_irq+0x2f4/0x78c
[ 39.200051] request_threaded_irq+0xe8/0x1a0
Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility.
Fixes: faa87ce919 ("regmap-irq: Introduce config registers for irq types")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20221107202114.823975-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been a busy release for regmap with one thing and other,
there's been an especially large interest in MMIO regmaps for some
reason. The bulk of the changes are cleanups but there are several user
visible changes too:
- Support for I/O ports in regmap-mmio.
- Support for accelerated noinc operations in regmap-mmio.
- Support for tracing the register values in bulk operations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6sskACgkQJNaLcl1U
h9Bj1Qf+PLNz4gQq7ki06KI6+Liz6daN5j/bfUGSizx6rns5qOZxt1A/CwDFM5ZR
6aY+tGL4ksYfEUEZHsr7qaQKptWoLmwDVX0oYZqHdBf4Wf7I6iht8WCq68KwDCzz
zQoswzoLmVuRd6aplFifEF3SOqjBrTQO3gkXBteIeA6/i1pwO9wOJdM4ZU54FX+Q
zexv7H/E9uKVonrViBMLPczaPhge4+ILNEDekSUW4AZ0RmUZ6JjW3aOZbwR6ut1x
7bS3ric9xGhW4IQdOZISY+ARhPPworcgdK5GoqBfjWV2vYc0c1iCawvF73Wm/NJC
GMGc5FIBi3a82oCMmSR1dAcci9CRLw==
=TTeQ
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been a busy release for regmap with one thing and other,
there's been an especially large interest in MMIO regmaps for some
reason. The bulk of the changes are cleanups but there are several
user visible changes too:
- Support for I/O ports in regmap-mmio
- Support for accelerated noinc operations in regmap-mmio
- Support for tracing the register values in bulk operations"
* tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: mmio: replace return 0 with break in switch statement
regmap: spi-avmm: Use swabXX_array() helpers
regmap: mmio: Use swabXX_array() helpers
swab: Add array operations
regmap: trace: Remove unneeded blank lines
regmap: trace: Remove explicit castings
regmap: trace: Remove useless check for NULL for bulk ops
regmap: mmio: Fix rebase error
regmap: check right noinc bounds in debug print
regmap: introduce value tracing for regmap bulk operations
regmap/hexagon: Properly fix the generic IO helpers
regmap: mmio: Support accelerared noinc operations
regmap: Support accelerated noinc operations
regmap: Make use of get_unaligned_be24(), put_unaligned_be24()
regmap: mmio: Fix MMIO accessors to avoid talking to IO port
regmap: mmio: Introduce IO accessors that can talk to IO port
regmap: mmio: Get rid of broken 64-bit IO
regmap: mmio: Remove mmio_relaxed member from context
Variable min_stride is assigned a value that is never read, fix this by
replacing the return 0 with a break statement. This also makes the case
statement consistent with the other cases in the switch statement.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220922080445.818020-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we have a few helpers to swab elements of a given size in an array
use them instead of open coded variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220831212744.56435-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we have a few helpers to swab elements of a given size in an array
use them instead of open coded variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220831212744.56435-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a few unneeded blank lines in some of event definitions,
remove them in order to make those definitions consistent with
the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901132336.33234-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to have explicit castings to the same type the
variables are of. Remove the explicit castings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220901132336.33234-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the buffer pointer is NULL we already are in troubles since
regmap bulk API expects caller to provide valid parameters,
it dereferences that without any checks before we call for
traces.
Moreover, the current code will print garbage in the case of
buffer is NULL and length is not 0.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901132336.33234-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A dangling pointless "ret 0" was left in and some unneeded
whitespace can go too.
Fixes: 81c0386c13 ("regmap: mmio: Support accelerared noinc operations")
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220831141303.501548-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We were using the wrong bound in the debug prints: this
needs to be the number of elements, not the number of bytes,
since we're indexing into an element-size typed array.
Fixes: c20cc099b3 ("regmap: Support accelerated noinc operations")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220823135700.265019-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, only one-register io operations support tracepoints with
value logging. For the regmap bulk operations developer can view
hw_start/hw_done tracepoints with starting reg number and registers
count to be reading or writing. This patch injects tracepoints with
dumping registers values in the hex format to regmap bulk reading
and writing.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20220816181451.5628-1-ddrokosov@sberdevices.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the max_raw_read and max_raw_write limits in regmap_spi struct
do not take into account the additional size of the transmitted register
address and padding. This may result in exceeding the maximum permitted
SPI message size, which could cause undefined behaviour, e.g. data
corruption.
Fix regmap_get_spi_bus() to properly adjust the above mentioned limits
by reserving space for the register address/padding as set in the regmap
configuration.
Fixes: f231ff38b7 ("regmap: spi: Set regmap max raw r/w from max_transfer_size")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220818104851.429479-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newly added callback for accelerated noinc MMIO
to provide writesb, writesw, writesl, writesq, readsb, readsw,
readsl and readsq.
A special quirk is needed to deal with big endian regmaps: there
are no accelerated operations defined for big endian, so fall
back to calling the big endian operations itereatively for this
case.
The Hexagon architecture turns out to have an incomplete
<asm/io.h>: writesb() is not implemented. Fix this by doing
what other architectures do: include <asm-generic/io.h> into
the <asm/io.h> file.
Cc: Brian Cain <bcain@quicinc.com>
Cc: linux-hexagon@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220816204832.265837-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Several architectures have accelerated operations for MMIO
operations writing to a single register, such as writesb, writesw,
writesl, writesq, readsb, readsw, readsl and readsq but regmap
currently cannot use them because we have no hooks for providing
an accelerated noinc back-end for MMIO.
Solve this by providing reg_[read/write]_noinc callbacks for
the bus abstraction, so that the regmap-mmio bus can use this.
Currently I do not see a need to support this for custom regmaps
so it is only added to the bus.
Callbacks are passed a void * with the array of values and a
count which is the number of items of the byte chunk size for
the specific register width.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220816204832.265837-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Currently regmap MMIO doesn't support IO ports, while being inconsistent
in used IO accessors. Fix the latter and extend framework with the
former.
Since we have a proper endianness converters for BE 24-bit data use
them. While at it, format the code using switch-cases as it's done
for the rest of the endianness handlers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220726151213.71712-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently regmap MMIO is inconsistent with IO accessors. I.e.
the Big Endian counterparts are using ioreadXXbe() / iowriteXXbe()
which are not clean implementations of readXXbe().
That said, reimplement current Big Endian MMIO accessors by replacing
ioread()/iowrite() with respective read()/write() and swab() calls.
Note, there are no current in-kernel users that may utilize the
functionality of the IO ports on Big Endian hardware. All drivers
that use regmap MMIO either Little Endian, or they don't map IO
ports in a way that ioreadXX()/iowriteXX() may be utilized.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some users may use regmap MMIO for IO ports, and this can be done
by assigning ioreadXX()/iowriteXX() and their Big Endian counterparts
to the regmap context.
Add IO port support with a corresponding flag added.
While doing that, make sure that user won't select relaxed MMIO access
along with IO port because the latter have no relaxed variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation, besides having no active users, is broken
by design of regmap. For 64-bit IO we need to supply 64-bit value,
otherwise there is no way to handle upper 32 bits in 64-bit register.
Hence, remove the broken IO accessors for good and wait for real user
that can fix entire regmap API for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to keep mmio_relaxed member in the context, it's
onetime used during generation of the context. Remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20220808203401.35153-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A regmap may still require to set a custom reg_update_bits instead of
relying to the regmap_bus_read/write general function.
Permit to set it in the map if provided by the regmap config.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220715201032.19507-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In regmap_field_init() when a invalid mask is provided it still
initializes with any warnings.
An example of this is when the LSB is greater than MSB a mask of zero
is produced.
WARN_ONCE() is not ideal for this but requires less changes to core regmap
code.
Cc: Mark Brown <broonie@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20220708013125.313892-1-mranostay@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
irq_reg_stride in struct regmap_irq_chip is often 0, but that
actually means to use the default stride of 1. The effective
stride is stored in struct regmap_irq_chip_data->irq_reg_stride
and will get the corrected default value.
The default ->get_irq_reg() callback was using the stride from
the chip definition, which is wrong; fix it to use the effective
stride from the chip data instead.
Link: https://lore.kernel.org/lkml/acaaf77f-3282-8544-dd3c-7915fc1a6a4f@samsung.com/
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220704112847.23844-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:
This series is an attempt at cleaning up the regmap-irq API in order
to simplify things and consolidate existing features, while at the
same time generalizing it to support a wider range of hardware.
There is a new system for IRQ type configuration, some tweaks to
unmask registers so they're more intuitive and useful, and a new
callback for calculating register addresses. There's also a few
minor code cleanups in here.
In v2 I've taken the approach of adding new features and deprecating
existing ones rather than removing them aggressively. Warnings will
be issued for any drivers that use deprecated features, but they'll
otherwise continue to function normally.
One important caveat: not all of these changes are tested beyond
compile testing, since I don't have hardware to exercise all of
the features.
When num_reg_defaults > 0 but reg_defaults is NULL, there will be a
NULL pointer exception.
Current code has no such usage, but as additional hardening, also
check this to prevent any chance of crashing.
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220629130951.63040-1-schspa@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This flag is a bit of a hack and the same thing can be accomplished
using a custom ->get_irq_reg() callback. Add a warning to catch any
use of the flag.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-13-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the internal sub_irq_reg() function with a public callback
that drivers can use when they have more complex register layouts.
The default implementation is regmap_irq_get_irq_reg_linear(), used
if the chip doesn't provide its own callback.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-12-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To me "unmask" suggests that we write 1s to the register when
an interrupt is enabled. This also makes sense because it's the
opposite of what the "mask" register does (write 1s to disable
an interrupt).
But regmap-irq does the opposite: for a disabled interrupt, it
writes 1s to "unmask" and 0s to "mask". This is surprising and
deviates from the usual way mask registers are handled.
Additionally, mask_invert didn't interact with unmask registers
properly -- it caused them to be ignored entirely.
Fix this by making mask and unmask registers orthogonal, using
the following behavior:
* Mask registers are written with 1s for disabled interrupts.
* Unmask registers are written with 1s for enabled interrupts.
This behavior supports both normal or inverted mask registers
and separate set/clear registers via different combinations of
mask_base/unmask_base.
The old unmask register behavior is deprecated. Drivers need to
opt-in to the new behavior by setting mask_unmask_non_inverted.
Warnings are issued if the driver relies on deprecated behavior.
Chips that only set one of mask_base/unmask_base don't have to
use the mask_unmask_non_inverted flag because that use case was
previously not supported.
The mask_invert flag is also deprecated in favor of describing
inverted mask registers as unmask registers.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-11-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Config registers can be used to replace both type and virtual
registers, so mark both features are deprecated and issue a
warning if they're used.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-10-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Config registers provide a more uniform approach to handling irq type
registers. They are essentially an extension of the virtual registers
used by the qcom-pm8008 driver.
Config registers can be represented as a 2D array:
config_base[0] reg0,0 reg0,1 reg0,2 reg0,3
config_base[1] reg1,0 reg1,1 reg1,2 reg1,3
config_base[2] reg2,0 reg2,1 reg2,2 reg2,3
There are 'num_config_bases' base registers, each of which is used to
address 'num_config_regs' registers. The addresses are calculated in
the same way as for other bases. It is assumed that an irq's type is
controlled by one column of registers; that column is identified by
the irq's 'type_reg_offset'.
The set_type_config() callback is responsible for updating the config
register contents. It receives an array of buffers (each represents a
row of registers) and the index of the column to update, along with
the 'struct regmap_irq' description and requested irq type.
Buffered values are written to registers in regmap_irq_sync_unlock().
Note that the entire register contents are overwritten, which is a
minor change in behavior from type registers via 'type_base'.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-9-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several conditions that must be satisfied to support
bulk read of status registers. Move the check into a function
to avoid duplicating it in two places.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-8-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a71411dbf6 ("regmap: irq: add chip option mask_writeonly")
introduced the mask_writeonly option, but it isn't used now and it
appears it's never been used by any in-tree drivers. The motivation
for the option is mentioned in the commit message,
Some irq controllers have writeonly/multipurpose register
layouts. In those cases we read invalid data back. [...]
The option causes mask register updates to use regmap_write_bits()
instead of regmap_update_bits().
However, regmap_write_bits() doesn't solve the reading invalid data
problem. It's still a read-modify-write op like regmap_update_bits().
The difference is that 'update bits' will only write the new value
if it is different from the current value, while 'write bits' will
write the new value unconditionally, even if it's the same as the
current value.
This seems like a bit of a specialized use case and probably isn't
that useful for regmap-irq, so let's just remove the option and go
back to using an 'update bits' op for the mask registers. We can
always add the option back if some driver ends up needing it in the
future.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-7-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap_irq_update_bits() is misnamed and should only be used for
updating mask registers, since it checks the mask_writeonly flag.
However, it was also used for updating wake and type registers.
It's safe to replace these uses with regmap_update_bits() because
there are no users of the mask_writeonly flag.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-6-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check types_supported instead of checking type_rising/falling_val
when using type_in_mask interrupts. This makes the intent clearer
and allows a type_in_mask irq to support level or edge triggers,
rather than only edge triggers.
Update the documentation and comments to reflect the new behavior.
This shouldn't affect existing drivers, because if they didn't
set types_supported properly the type buffer wouldn't be updated.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of mentioning unsigned int directly, use a sizeof(...)
involving the buffer we're allocating to ensure the types don't
get out of sync.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-4-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It appears that no chip ever required a nonzero type_reg_stride
and commit 1066cfbdfa ("regmap-irq: Extend sub-irq to support
non-fixed reg strides") broke support. Just remove the field.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220623211420.918875-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For devices with no cache it can make sense to use cache only mode as a
mechanism for trapping writes to hardware which is inaccessible but since
no cache is equivalent to cache bypass we force such devices into bypass
mode. This means that our check that bypass and cache only mode aren't both
enabled simultanously is less sensible for devices without a cache so relax
it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220622171723.1235749-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to divide the sub-irq status register offset by register
stride to get an index for the status buffer to avoid an out of
bounds write when the register stride is greater than 1.
Fixes: a2d21848d9 ("regmap: regmap-irq: Add main status register support")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When enabling a type_in_mask irq, the type_buf contents must be
AND'd with the mask of the IRQ we're enabling to avoid enabling
other IRQs by accident, which can happen if several type_in_mask
irqs share a mask register.
Fixes: bc998a7303 ("regmap: irq: handle HW using separate rising/falling edge interrupts")
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220620200644.1961936-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some functions that were missed by commit d77e745613 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.
The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.
Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e745613 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.
But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.
Also is a fragile assumption to make so is better to make it fail earlier.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e745613 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.
Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add simple bit operations for setting, clearing and testing specific
bits with regmap_field.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKpskgACgkQJNaLcl1U
h9BF7Af7Bg1qhqvTJQKvfc1TU7pRnO2Mt90MJTTAFMgiMP/+FZhiaDrKm12SBTPh
w8Gomg8X+EYVpiqtywFoc0mZIUe03g9+8RpuKyK2EOReaguhU2qHQPDo2Dhx6x5p
VnNY9w/rhQsrX8153c6ICZ8YqrxNqCbgCh7eulMeXz74wbxwbrNdZbbCaM9+WCS/
fTWtNUwZ+3JtaSP55UCX/ITNrLct0gPdWqkRpLExv9HdOf1HaBRUTZH69ftQg82S
PHsxEBpPWKbViflSU7V5/UgeBCTS7FjRpwB6OEX69V+VGhRIey9IgZqbSsX9KoXX
RYPKj5DZD9JtPNA0W5Dzs0KyUIlDtA==
=vniQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKqENwACgkQJNaLcl1U
h9D1pQf/cbMWcZeRe6eRxvDueIhyMYXwhahxEHMCL6EOR5SLLARB40klJq5DDPlM
D7SZlPES1oXXQ8zm8rpBahfQf3AAeiUMZ4+bOMMU45xaNTKeOGPuihiP69PQxzp1
RryrB6/AN+qKepHaWsnhOyarVnJ2XUDJ58QBmYwee5UFdxiPPIzjMLC0FVEgLhIc
Ng75dFIur3SknYyoYyd9gsH/VydlaEiYQ9s3GRKtq+D0P/fbsylPp1w5Lup3tXWh
kGYyJroz9doevY5K+TeMsVqSJhES3VJkz9GVxkdwCB6qhrXzGkbdnU7ZF1MZGlnf
bOC6+lE+CxoDWx/apLmdJg6ZmnHxdQ==
=CWeE
-----END PGP SIGNATURE-----
Merge tag 'regmap-field-bit-helpers' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into regmap-5.20
regmap: Add regmap_field helpers for simple bit operations
Add simple bit operations for setting, clearing and testing specific
bits with regmap_field.
Mark Brown