Commit Graph

40 Commits

Author SHA1 Message Date
Nick Child c13f2b2bb5 powerpc/mm: Add __init attribute to eligible functions
Some functions defined in 'arch/powerpc/mm' are deserving of an
`__init` macro attribute. These functions are only called by other
initialization functions and therefore should inherit the attribute.
Also, change function declarations in header files to include `__init`.

Signed-off-by: Nick Child <nick.child@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211216220035.605465-4-nick.child@ibm.com
2021-12-23 22:33:11 +11:00
Christophe Leroy 37eb7ca91b powerpc/32s: Allocate one 256k IBAT instead of two consecutives 128k IBATs
Today we have the following IBATs allocated:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc079ffff 0x00780000       128K Kernel   x     m
	5: 0xc07a0000-0xc07bffff 0x007a0000       128K Kernel   x     m
	6:         -
	7:         -

The two 128K should be a single 256K instead.

When _etext is not aligned to 128Kbytes, the system will allocate
all necessary BATs to the lower 128Kbytes boundary, then allocate
an additional 128Kbytes BAT for the remaining block.

Instead, align the top to 128Kbytes so that the function directly
allocates a 256Kbytes last block:

	---[ Instruction Block Address Translation ]---
	0: 0xc0000000-0xc03fffff 0x00000000         4M Kernel   x     m
	1: 0xc0400000-0xc05fffff 0x00400000         2M Kernel   x     m
	2: 0xc0600000-0xc06fffff 0x00600000         1M Kernel   x     m
	3: 0xc0700000-0xc077ffff 0x00700000       512K Kernel   x     m
	4: 0xc0780000-0xc07bffff 0x00780000       256K Kernel   x     m
	5:         -
	6:         -
	7:         -

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ab58b296832b0ec650e2203200e060adbcb2677d.1637930421.git.christophe.leroy@csgroup.eu
2021-12-09 22:41:20 +11:00
Christophe Leroy 91ec66719d powerpc/32s: Move setup_{kuep/kuap}() into {kuep/kuap}.c
Avoids the #ifdef in mmu.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0b7a13d414837e58264edc336b89c2fe9f35f9bc.1622708530.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:07 +10:00
Christophe Leroy 80edc68e04 powerpc/32s: Define a MODULE area below kernel text all the time
On book3s/32, the segment below kernel text is used for module
allocation when CONFIG_STRICT_KERNEL_RWX is defined.

In order to benefit from the powerpc specific module_alloc()
function which allocate modules with 32 Mbytes from
end of kernel text, use that segment below PAGE_OFFSET at all time.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a46dcdd39a9e80b012d86c294c4e5cd8d31665f3.1617283827.git.christophe.leroy@csgroup.eu
2021-04-14 23:04:13 +10:00
Christophe Leroy 90cbac0e99 powerpc: Enable KFENCE for PPC32
Add architecture specific implementation details for KFENCE and enable
KFENCE for the ppc32 architecture. In particular, this implements the
required interface in <asm/kfence.h>.

KFENCE requires that attributes for pages from its memory pool can
individually be set. Therefore, force the Read/Write linear map to be
mapped at page granularity.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8dfe1bd2abde26337c1d8c1ad0acfcc82185e0d5.1614868445.git.christophe.leroy@csgroup.eu
2021-03-24 14:09:30 +11:00
Christophe Leroy 179ae57dba powerpc/32s: mfsrin()/mtsrin() become mfsr()/mtsr()
Function names should tell what the function does, not how.

mfsrin() and mtsrin() are read/writing segment registers.

They are called that way because they are using mfsrin and mtsrin
instructions, but it doesn't matter for the caller.

In preparation of following patch, change their name to mfsr() and mtsr()
in order to make it obvious they manipulate segment registers without
messing up with how they do it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f92d99f4349391b77766745900231aa880a0efb5.1612612022.git.christophe.leroy@csgroup.eu
2021-02-09 01:10:15 +11:00
Christophe Leroy 068fdba10e powerpc/32s: Move early_mmu_init() into mmu.c
early_mmu_init() is independent of MMU type and not
directly linked to tlb handling.

In a following patch, tlb.c will be restricted to HASH mmu.

Move early_mmu_init() into mmu.c which is common.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e51b5e2fe6bca623b33116403043d3a1b5eaf826.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:46:56 +11:00
Christophe Leroy f265512582 powerpc/32s: Move _tlbie() and _tlbia() in a new file
_tlbie() and _tlbia() are used only on 603 cores while the
other functions are used only on cores having a hash table.

Move them into a new file named nohash_low.S

Add mmu_hash_lock var is used by both, it needs to go
in a common file.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a265b1b17a64153463d361280cb4b43eb1266a4.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:46:55 +11:00
Christophe Leroy 6e980b5c56 powerpc/32s: Declare Hash related vars as __initdata
Hash related vars are used at init only.

Declare them in __initdata.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3878ea30706839fcff9196790ff3f99c128c3f6a.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:46:55 +11:00
Christophe Leroy 4b74a35fc7 powerpc/32s: Make Hash var static
Hash var is used only locally in mmu.c now.

No need to set it in head_32.S anymore.

Make it static and initialises it to the early hash table.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/786c82a89cdfdaabb32b72a44f7c312fa81d192b.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:46:54 +11:00
Christophe Leroy 4cc445b4ff powerpc/32s: Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead of checking Hash var
We now have an early hash table on hash MMU, so no need to check
Hash var to know if the Hash table is set of not.

Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead. This will allow
optimisation via jump_label.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f1766631a9e014b6433f1a3c12c726ddfce34220.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:45:08 +11:00
Christophe Leroy 03d5b19c72 powerpc/32s: Make bat_addrs[] static
This table is used only locally. Declare it static.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/054fec0c139fc4c0a306360b360784733c0a6e65.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:45:08 +11:00
Christophe Leroy 79d1befe05 powerpc/32s: Don't hash_preload() kernel text
We now always map kernel text with BATs. Neither need to preload
hash with kernel text addresses nor ensure they are never evicted.

This is more or less a revert of commit ee4f2ea486 ("[POWERPC] Fix
32-bit mm operations when not using BATs")

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0a0bab7fadd89aa829e33420fbc10d60c59040a7.1606285014.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:31 +11:00
Christophe Leroy 035b19a15a powerpc/32s: Always map kernel text and rodata with BATs
Since commit 2b279c0348 ("powerpc/32s: Allow mapping with BATs with
DEBUG_PAGEALLOC"), there is no real situation where mapping without
BATs is required.

In order to simplify memory handling, always map kernel text
and rodata with BATs even when "nobats" kernel parameter is set.

Also fix the 603 TLB miss exceptions that don't require anymore
kernel page table if DEBUG_PAGEALLOC.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da51f7ec632825a4ce43290a904aad61648408c0.1606285013.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:31 +11:00
Christophe Leroy 69a1593abd powerpc/32s: Setup the early hash table at all time.
At the time being, an early hash table is set up when
CONFIG_KASAN is selected.

There is nothing wrong with setting such an early hash table
all the time, even if it is not used. This is a statically
allocated 256 kB table which lies in the init data section.

This makes the code simpler and may in the future allow to
setup early IO mappings with fixmap instead of hard coding BATs.

Put create_hpte() and flush_hash_pages() in the .ref.text section
in order to avoid warning for the reference to early_hash[]. This
reference is removed by MMU_init_hw_patch() before init memory is
freed.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8f8101c368b8a6451844a58d7bd7d83c14cf2aa.1601566529.git.christophe.leroy@csgroup.eu
2020-10-08 21:17:14 +11:00
Christophe Leroy 2e38ea4866 powerpc: Tidy up a bit after removal of PowerPC 601.
The removal of the 601 left some standalone blocks from
former if/else. Drop the { } and re-indent.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/31c4cd093963f22831bf388449056ee045533d3b.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08 21:17:13 +11:00
Christophe Leroy 8b14e1dff0 powerpc: Remove support for PowerPC 601
PowerPC 601 has been retired.

Remove all associated specific code.

CPU_FTRS_PPC601 has CPU_FTR_COHERENT_ICACHE and CPU_FTR_COMMON.

CPU_FTR_COMMON is already present via other CPU_FTRS.
None of the remaining CPU selects CPU_FTR_COHERENT_ICACHE.

So CPU_FTRS_PPC601 can be removed from the possible features,
hence can be removed completely.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/60b725d55e21beec3335175c20b77903ff98284f.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08 21:17:13 +11:00
Christophe Leroy 541cebb51f powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.

In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.

Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.

Fixes: c496433197 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
2020-08-21 23:30:25 +10:00
Christophe Leroy 7bee31ad8e powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
When MODULES_VADDR is defined, is_module_segment() shall check the
address against it instead of checking agains VMALLOC_START.

Fixes: 6ca055322d ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/07884ed033c31e074747b7eb8eaa329d15db07ec.1596641219.git.christophe.leroy@csgroup.eu
2020-08-18 13:40:15 +10:00
Christophe Leroy c496433197 powerpc/32s: Only leave NX unset on segments used for modules
Instead of leaving NX unset on all segments above the start
of vmalloc space, only leave NX unset on segments used for
modules.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7172c0f5253419315e434a1816ee3d6ed6505bc0.1593428200.git.christophe.leroy@csgroup.eu
2020-07-27 00:01:30 +10:00
Mike Rapoport e05c7b1f2b mm: pgtable: add shortcuts for accessing kernel PMD and PTE
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address.  Make these
helpers available for all architectures.

[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
  Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Christophe Leroy 2b279c0348 powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC
DEBUG_PAGEALLOC only manages RW data.

Text and RO data can still be mapped with BATs.

In order to map with BATs, also enforce data alignment. Set
by default to 256M which is a good compromise for keeping
enough BATs for also KASAN and IMMR.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fd29c1718ee44d82115d0e835ced808eb4ccbf51.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26 22:22:23 +10:00
Christophe Leroy 4b19f96a81 powerpc/32s: Don't warn when mapping RO data ROX.
Mapping RO data as ROX is not an issue since that data
cannot be modified to introduce an exploit.

PPC64 accepts to have RO data mapped ROX, as a trade off
between kernel size and strictness of protection.

On PPC32, kernel size is even more critical as amount of
memory is usually small.

Depending on the number of available IBATs, the last IBATs
might overflow the end of text. Only warn if it crosses
the end of RO data.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
2020-05-26 22:22:19 +10:00
Michael Ellerman 819723a8a2 Merge branch 'fixes' into next
Merge in our fixes branch. In particular we want to merge the TM and KUAP fixes,
so we can add selftests for them in next.
2020-03-10 15:16:42 +11:00
Christophe Leroy 0b1c524caa powerpc/32: refactor pmd_offset(pud_offset(pgd_offset...
At several places pmd pointer is retrieved through the same action:

	pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr);

or

	pmd = pmd_offset(pud_offset(pgd_offset_k(addr), addr), addr);

Refactor this by implementing two helpers pmd_ptr() and pmd_ptr_k()

This will help when adding the p4d level.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7b065c5be35726af4066cab238ee35cabceda1fa.1578558199.git.christophe.leroy@c-s.fr
2020-02-26 10:34:40 +11:00
Christophe Leroy 232ca1eeca powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK
hash_page() needs to read page tables from kernel memory. When entire
kernel memory is mapped by BATs, which is normally the case when
CONFIG_STRICT_KERNEL_RWX is not set, it works even if the page hosting
the page table is not referenced in the MMU hash table.

However, if the page where the page table resides is not covered by
a BAT, a DSI fault can be encountered from hash_page(), and it loops
forever. This can happen when CONFIG_STRICT_KERNEL_RWX is selected
and the alignment of the different regions is too small to allow
covering the entire memory with BATs. This also happens when
CONFIG_DEBUG_PAGEALLOC is selected or when booting with 'nobats'
flag.

Also, if the page containing the kernel stack is not present in the
MMU hash table, registers cannot be saved and a recursive DSI fault
is encountered.

To allow hash_page() to properly do its job at all time and load the
MMU hash table whenever needed, it must run with data MMU disabled.
This means it must be called before re-enabling data MMU. To allow
this, registers clobbered by hash_page() and create_hpte() have to
be saved in the thread struct together with SRR0, SSR1, DAR and DSISR.
It is also necessary to ensure that DSI prolog doesn't overwrite
regs saved by prolog of the current running exception. That means:
- DSI can only use SPRN_SPRG_SCRATCH0
- Exceptions must free SPRN_SPRG_SCRATCH0 before writing to the stack.

This also fixes the Oops reported by Erhard when create_hpte() is
called by add_hash_page().

Due to prolog size increase, a few more exceptions had to get split
in two parts.

Fixes: cd08f109e2 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206501
Link: https://lore.kernel.org/r/64a4aa44686e9fd4b01333401367029771d9b231.1581761633.git.christophe.leroy@c-s.fr
2020-02-18 21:31:11 +11:00
Christophe Leroy cd08f109e2 powerpc/32s: Enable CONFIG_VMAP_STACK
A few changes to retrieve DAR and DSISR from struct regs
instead of retrieving them directly, as they may have
changed due to a TLB miss.

Also modifies hash_page() and friends to work with virtual
data addresses instead of physical ones. Same on load_up_fpu()
and load_up_altivec().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix tovirt_vmstack call in head_32.S to fix CHRP build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2e2509a242fd5f3e23df4a06530c18060c4d321e.1576916812.git.christophe.leroy@c-s.fr
2020-01-27 22:37:24 +11:00
Christophe Leroy cbcaff7d27 powerpc/32s: automatically allocate BAT in setbat()
If no BAT is given to setbat(), select an available BAT.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a212bd36fbd6179e0929b6c727febc35132ac25c.1568665466.git.christophe.leroy@c-s.fr
2019-11-19 19:38:38 +11:00
Christophe Leroy 12c3f1fd87 powerpc/32s: get rid of CPU_FTR_601 feature
Now that 601 is exclusive from other 6xx, CPU_FTR_601 and
associated fixups are useless.

Drop this feature and use #ifdefs instead.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ecdb7194a17dbfa01865df6a82979533adc2c70b.1566834712.git.christophe.leroy@c-s.fr
2019-08-28 23:19:33 +10:00
Christophe Leroy f204338f8e powerpc/mm: ppc 603 doesn't need update_mmu_cache()
On powerpc 603, there is no hash table so get out of
update_mmu_cache() early.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6133e0f115d955fac4061536dab0fa7480a1c433.1565933217.git.christophe.leroy@c-s.fr
2019-08-20 21:22:14 +10:00
Christophe Leroy f49f4e2b68 powerpc/mm: Simplify update_mmu_cache() on BOOK3S32
On BOOK3S32, hash_preload() neither use is_exec nor trap,
so drop those parameters and simplify update_mmu_cached().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/35f143c6fe29f9fd25c7f3cd4448ae401029ce3c.1565933217.git.christophe.leroy@c-s.fr
2019-08-20 21:22:14 +10:00
Christophe Leroy e5a1edb9fe powerpc/mm: move update_mmu_cache() into book3s hash utils.
update_mmu_cache() is only for BOOK3S, and can be simplified for
BOOK3S32.

Move it out of mem.c into respective BOOK3S32 and BOOK3S64 files
containing hash utils.

BOOK3S64 version of hash_preload() is only used locally, declare it
static.

Remove the radix_enabled() stuff in BOOK3S32 version.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/107aaf43583a5f5d09e0d4e84c4c4390ecfcd512.1565933217.git.christophe.leroy@c-s.fr
2019-08-20 21:22:14 +10:00
Christophe Leroy 9d6d712fbf powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN.
When KASAN is selected, the definitive hash table has to be
set up later, but there is already an early temporary one.

When KASAN is not selected, there is no early hash table,
so the setup of the definitive hash table cannot be delayed.

Fixes: 72f208c6a8 ("powerpc/32s: move hash code patching out of MMU_init_hw()")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Jonathan Neuschafer <j.neuschaefer@gmx.net>
Tested-by: Jonathan Neuschafer <j.neuschaefer@gmx.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b7860c5e1e784d6b96ba67edf47dd6cbc2e78ab6.1565776892.git.christophe.leroy@c-s.fr
2019-08-20 21:22:13 +10:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Linus Torvalds b970afcfca powerpc updates for 5.2
Highlights:
 
  - Support for Kernel Userspace Access/Execution Prevention (like
    SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel
    from accidentally accessing userspace outside copy_to/from_user(), or
    ever executing userspace.
 
  - KASAN support on 32-bit.
 
  - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the
    same address ranges we use with the Radix MMU.
 
  - A rewrite into C of large parts of our idle handling code for 64-bit Book3S
    (ie. power8 & power9).
 
  - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the
    null_syscall benchmark.
 
  - On 64-bit bare metal we have support for recovering from errors with the time
    base (our clocksource), however if that fails currently we hang in __delay()
    and never crash. We now have support for detecting that case and short
    circuiting __delay() so we at least panic() and reboot.
 
  - Add support for optionally enabling the DAWR on Power9, which had to be
    disabled by default due to a hardware erratum. This has the effect of
    enabling hardware breakpoints for GDB, the downside is a badly behaved
    program could crash the machine by pointing the DAWR at cache inhibited
    memory. This is opt-in obviously.
 
  - xmon, our crash handler, gets support for a read only mode where operations
    that could change memory or otherwise disturb the system are disabled.
 
 Plus many clean-ups, reworks and minor fixes etc.
 
 Thanks to:
   Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew
   Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings,
   Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph
   Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy,
   George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh
   Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent
   Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
   Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch,
   Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
   Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev
   Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin
   Schneider, Wei Yongjun, Wen Yang, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc1WbwAAoJEFHr6jzI4aWAv5cP/iDskai4Az/GCa6yLj4b+det
 7mc7tTOaEzhUtvfrYYfHgvvdNNzo1ETv7rqTdZqtWJ3xfwdeowLFXXZwSywZKUDB
 bi4pcl2v55Qlf9kxgx9RDr6+4fTwGG4nhO2qPDJDR1umEih9mG/2HJ7d+Wnq6Va2
 E9srd+R6Fa0ty88+9vzBtdyllnDK1XHu3ahsxCH62aRm79ucuVrxyydWmbbs5lJe
 a7g/OQIPgZmObHhfXvw9DFkOvkp5Pm6hfHOeyQH2nTB5X6k0judWv00uoHTJgOuP
 DKxZtDhaGnajUfuhQYboDPOuFjY7lkfgEXaagyZsjdudqridTMmv1iU1o7iy8BT4
 AId4DyJbvFFgqRJkCwKzhKRRHPfFMfM7KTJ38GPZuPmniuULk9uiIy6JyY0tXO+l
 UQEclPzOTPkAE12FBaOBuqZqTRuBQuokWQF8ZDPOxbNAixHgFoRd4Z9diNwCPpLu
 +KoyCwd2Gm5DyX+mC85sWG28IPKi9Hhhw2XBOA5F4A2kH6uFa1BnERSRGYomx+pc
 BvEXHglf/vgV0XUQZfDCsiOecIKYuWxgre0/liLhhU5qMss2pxHczzffH4KtdykS
 9y7o3mVRcS7Moitbmb6SAJoQxbR5QhzfN832DbSd6jEfKdg1ytZlfHTG0WZYHKDs
 PHs6V1N+cQANdukutrJz
 =cUkd
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly delayed due to the issue with printk() calling
  probe_kernel_read() interacting with our new user access prevention
  stuff, but all fixed now.

  The only out-of-area changes are the addition of a cpuhp_state, small
  additions to Documentation and MAINTAINERS updates.

  Highlights:

   - Support for Kernel Userspace Access/Execution Prevention (like
     SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents
     the kernel from accidentally accessing userspace outside
     copy_to/from_user(), or ever executing userspace.

   - KASAN support on 32-bit.

   - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to
     use the same address ranges we use with the Radix MMU.

   - A rewrite into C of large parts of our idle handling code for
     64-bit Book3S (ie. power8 & power9).

   - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup
     in the null_syscall benchmark.

   - On 64-bit bare metal we have support for recovering from errors
     with the time base (our clocksource), however if that fails
     currently we hang in __delay() and never crash. We now have support
     for detecting that case and short circuiting __delay() so we at
     least panic() and reboot.

   - Add support for optionally enabling the DAWR on Power9, which had
     to be disabled by default due to a hardware erratum. This has the
     effect of enabling hardware breakpoints for GDB, the downside is a
     badly behaved program could crash the machine by pointing the DAWR
     at cache inhibited memory. This is opt-in obviously.

   - xmon, our crash handler, gets support for a read only mode where
     operations that could change memory or otherwise disturb the system
     are disabled.

  Plus many clean-ups, reworks and minor fixes etc.

  Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey
  Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
  Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater,
  Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson,
  Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman,
  Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe
  Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
  Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin,
  Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
  Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith,
  Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler,
  Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing"

* tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits)
  powerpc/64s: Use early_mmu_has_feature() in set_kuap()
  powerpc/book3s/64: check for NULL pointer in pgd_alloc()
  powerpc/mm: Fix hugetlb page initialization
  ocxl: Fix return value check in afu_ioctl()
  powerpc/mm: fix section mismatch for setup_kup()
  powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile
  powerpc/mm: Fix makefile for KASAN
  powerpc/kasan: add missing/lost Makefile
  selftests/powerpc: Add a signal fuzzer selftest
  powerpc/booke64: set RI in default MSR
  ocxl: Provide global MMIO accessors for external drivers
  ocxl: move event_fd handling to frontend
  ocxl: afu_irq only deals with IRQ IDs, not offsets
  ocxl: Allow external drivers to use OpenCAPI contexts
  ocxl: Create a clear delineation between ocxl backend & frontend
  ocxl: Don't pass pci_dev around
  ocxl: Split pci.c
  ocxl: Remove some unused exported symbols
  ocxl: Remove superfluous 'extern' from headers
  ocxl: read_pasid never returns an error, so make it void
  ...
2019-05-10 05:29:27 -07:00
Christophe Leroy e4dccf9092 powerpc/mm: print hash info in a helper
Reduce #ifdef mess by defining a helper to print
hash info at startup.

In the meantime, remove the display of hash table address
to reduce leak of non necessary information.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 01:20:26 +10:00
Christophe Leroy 8f156c23f4 powerpc/32s: don't try to print hash table address.
Due to %p, (ptrval) is printed in lieu of the hash table address.

showing the hash table address isn't an operationnal need so just
don't print it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 01:20:26 +10:00
Christophe Leroy 57e0491b58 powerpc/32s: drop Hash_end
Hash_end has never been used, drop it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 01:20:26 +10:00
Christophe Leroy 72f208c6a8 powerpc/32s: move hash code patching out of MMU_init_hw()
For KASAN, hash table handling will be activated early for
accessing to KASAN shadow areas.

In order to avoid any modification of the hash functions while
they are still used with the early hash table, the code patching
is moved out of MMU_init_hw() and put close to the big-bang switch
to the final hash table.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 01:20:26 +10:00
Christophe Leroy 17312f258c powerpc/mm: Move book3s32 specifics in subdirectory mm/book3s64
Several files in arch/powerpc/mm are only for book3S32. This patch
creates a subdirectory for them.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Shorten new filenames]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 01:20:22 +10:00