Commit Graph

12 Commits

Author SHA1 Message Date
Linus Walleij 7cca9b8b7c microblaze: Switch to standard restart handler
The microblaze uses the legacy APIs to dig out a GPIO pin
defined in the root of the device tree to issue a hard
reset of the platform.

Asserting a hard reset should be done using the standard
DT-enabled and fully GPIO descriptor aware driver in
drivers/power/reset/gpio-restart.c using the bindings
from Documentation/devicetree/bindings/power/reset/gpio-restart.txt

To achieve this, first make sure microblaze makes use of
the standard kernel restart path utilizing do_kernel_restart()
from <linux/reboot.h>. Put in some grace time and an
emergency print if the restart does not properly assert.

As this is basic platform functionality we patch the DTS
file and defconfig in one go for a lockstep change.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[ Michal: Move machine_restart back to reset.c ]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-19 10:43:32 +02:00
Rob Herring 45df561a7a microblaze: consolidate GPIO reset handling
Now that platform.c only has the GPIO reset handling left, move the
initcall to reset.c and remove platform.c.

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-21 13:57:39 +02:00
Michal Simek b366f11b9a microblaze: Remove unused prom header from reset.c
Completely unused header by this file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-05 12:36:42 +01:00
Michal Simek 54ea21f078 microblaze: Show message when reset gpio is not present
Signed-off-by: Michal Simek <monstr@monstr.eu>
2013-09-04 17:01:37 +02:00
Michal Simek aaa5241ebb microblaze: Prefer to use pr_XXX instead of printk(KERN_XX)
Fix reset.c, timer.c, setup.c file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04 15:00:32 +02:00
Stephan Linz 191d5eca24 microblaze: Improve failure handling for GPIO reset
Early exit from of_platform_reset_gpio_probe() if there
was no GPIO reset line configured.

Avoid kernel oops in gpio_system_reset():

[   27.413294] Restarting system.
[   27.415674] Machine restart...
[   27.418787] Oops: kernel access of bad area, sig: 11
[   27.423252]  Registers dump: mode=83871D1C
[   27.427428]  r1=00000000, r2=00000000, r3=FFFFFEF8, r4=00000000
[   27.433310]  r5=C026AED0, r6=00000001, r7=00000068, r8=00000000
[   27.439189]  r9=C3871DAC, r10=000011A5, r11=00000000, r12=0000000A
[   27.445318]  r13=00000000, r14=0000000F, r15=C00029BC, r16=00000000
[   27.451558]  r17=C011DE8C, r18=80000115, r19=0000000F, r20=48184ED8
[   27.457770]  r21=00000000, r22=FFFFFFEA, r23=00000001, r24=FEE1DEAD
[   27.463982]  r25=00000054, r26=1000B1C8, r27=00000000, r28=00000000
[   27.470208]  r29=00000000, r30=00000000, r31=C32D30C0, rPC=C011DE8C
[   27.476433]  msr=000042A2, ear=0000004B, esr=00000872, fsr=342E3732

And remove useless dump_stack from machine_restart.

Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04 14:23:42 +02:00
Grant Likely fe9f68449a gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
of_reset_gpio_handle() is largely a cut-and-paste copy of
of_get_named_gpio_flags(). There really isn't any reason for the
split, so this patch deletes the duplicate function

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Michal Simek <monstr@monstr.eu>
2011-12-12 13:40:16 -07:00
Grant Likely 594fa265e0 of/gpio: stop using device_node data pointer to find gpio_chip
Currently the kernel uses the struct device_node.data pointer to resolve
a struct gpio_chip pointer from a device tree node.  However, the .data
member doesn't provide any type checking and there aren't any rules
enforced on what it should be used for.  There's no guarantee that the
data stored in it actually points to an gpio_chip pointer.

Instead of relying on the .data pointer, this patch modifies the code
to add a lookup function which scans through the registered gpio_chips
and returns the gpio_chip that has a pointer to the specified
device_node.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: David Brownell <dbrownell@users.sourceforge.net>
CC: Bill Gatliff <bgat@billgatliff.com>
CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Jean Delvare <khali@linux-fr.org>
CC: linux-kernel@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-05 16:14:30 -06:00
Anton Vorontsov a19e3da5bc of/gpio: Kill of_gpio_chip and add members directly to gpio_chip
The OF gpio infrastructure is great for describing GPIO connections within
the device tree.  However, using a GPIO binding still requires changes to
the gpio controller just to add an of_gpio structure.  In most cases, the
gpio controller doesn't actually need any special support and the simple
OF gpio mapping function is more than sufficient.  Additional, the current
scheme of using of_gpio_chip requires a convoluted scheme to maintain
1:1 mappings between of_gpio_chip and gpio_chip instances.

If the struct of_gpio_chip data members were moved into struct gpio_chip,
then it would simplify the processing of OF gpio bindings, and it would
make it trivial to use device tree OF connections on existing gpiolib
controller drivers.

This patch eliminates the of_gpio_chip structure and moves the relevant
fields into struct gpio_chip (conditional on CONFIG_OF_GPIO).  This move
simplifies the existing code and prepares for adding automatic device tree
support to existing drivers.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
2010-07-05 16:14:30 -06:00
Michal Simek 67bf876654 microblaze: Support both levels for reset
Till this patch reset always perform writen to 1.
Now we can use negative logic and perform reset write to 0.

It is opposite level than is currently read from that pin

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:44:56 +01:00
Michal Simek 7537583040 microblaze: Fix announce message for reset gpio
I had to change message for gpio-reset because I always
not to see it. Prefix RESET is big and visible.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:44:56 +01:00
Michal Simek 42a2478b78 microblaze: GPIO reset support
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:40:08 +01:00