Commit Graph

121 Commits

Author SHA1 Message Date
Linus Torvalds 4fc8adcfec Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull third hunk of vfs changes from Al Viro:
 "This contains the ->direct_IO() changes from Omar + saner
  generic_write_checks() + dealing with fcntl()/{read,write}() races
  (mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
  repeatedly looking at ->f_flags, which can be changed by fcntl(2),
  check ->ki_flags - which cannot) + infrastructure bits for dhowells'
  d_inode annotations + Christophs switch of /dev/loop to
  vfs_iter_write()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
  block: loop: switch to VFS ITER_BVEC
  configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
  VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
  VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
  VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
  NFS: Don't use d_inode as a variable name
  VFS: Impose ordering on accesses of d_inode and d_flags
  VFS: Add owner-filesystem positive/negative dentry checks
  nfs: generic_write_checks() shouldn't be done on swapout...
  ocfs2: use __generic_file_write_iter()
  mirror O_APPEND and O_DIRECT into iocb->ki_flags
  switch generic_write_checks() to iocb and iter
  ocfs2: move generic_write_checks() before the alignment checks
  ocfs2_file_write_iter: stop messing with ppos
  udf_file_write_iter: reorder and simplify
  fuse: ->direct_IO() doesn't need generic_write_checks()
  ext4_file_write_iter: move generic_write_checks() up
  xfs_file_aio_write_checks: switch to iocb/iov_iter
  generic_write_checks(): drop isblk argument
  blkdev_write_iter: expand generic_file_checks() call in there
  ...
2015-04-16 23:27:56 -04:00
Linus Torvalds 84588e7a5d Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and udf updates from Jan Kara:
 "The pull contains quota changes which complete unification of XFS and
  VFS quota interfaces (so tools can use either interface to manipulate
  any filesystem).  There's also a patch to support project quotas in
  VFS quota subsystem from Li Xi.

  Finally there's a bunch of UDF fixes and cleanups and tiny cleanup in
  reiserfs & ext3"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
  udf: Update ctime and mtime when directory is modified
  udf: return correct errno for udf_update_inode()
  ext3: Remove useless condition in if statement.
  vfs: Add general support to enforce project quota limits
  reiserfs: fix __RASSERT format string
  udf: use int for allocated blocks instead of sector_t
  udf: remove redundant buffer_head.h includes
  udf: remove else after return in __load_block_bitmap()
  udf: remove unused variable in udf_table_free_blocks()
  quota: Fix maximum quota limit settings
  quota: reorder flags in quota state
  quota: paranoia: check quota tree root
  quota: optimize i_dquot access
  quota: Hook up Q_XSETQLIM for id 0 to ->set_info
  xfs: Add support for Q_SETINFO
  quota: Make ->set_info use structure with neccesary info to VFS and XFS
  quota: Remove ->get_xstate and ->get_xstatev callbacks
  gfs2: Convert to using ->get_state callback
  xfs: Convert to using ->get_state callback
  quota: Wire up Q_GETXSTATE and Q_GETXSTATV calls to work with ->get_state
  ...
2015-04-16 22:19:33 -04:00
Omar Sandoval 22c6186ece direct_IO: remove rw from a_ops->direct_IO()
Now that no one is using rw, remove it completely.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Omar Sandoval 6f67376318 direct_IO: use iov_iter_rw() instead of rw everywhere
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Omar Sandoval 17f8c842d2 Remove rw from {,__,do_}blockdev_direct_IO()
Most filesystems call through to these at some point, so we'll start
here.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:44 -04:00
Changwoo Min 0fd2ba36b8 udf: return correct errno for udf_update_inode()
Instead of -ENOMEM, properly return -EIO udf_update_inode()
error, similar/consistent to the rest of filesystems.

Signed-off-by: Changwoo Min <changwoo.m@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-04-01 12:46:46 +02:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Fabian Frederick 13f0c2b0f6 udf: remove redundant buffer_head.h includes
buffer_head.h was already included in udfdecl.h

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-14 07:54:02 +01:00
Fabian Frederick 6981498d79 udf: remove bool assignment to 0/1
Fix the following coccinelle warnings:

fs/udf/inode.c:753:2-13: WARNING: Assignment of bool to 0/1
fs/udf/inode.c:795:2-13: WARNING: Assignment of bool to 0/1

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-02-05 16:34:25 +01:00
Jan Kara 23b133bdc4 udf: Check length of extended attributes and allocation descriptors
Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07 13:51:58 +01:00
Jan Kara 7914495427 udf: Remove repeated loads blocksize
Store blocksize in a local variable in udf_fill_inode() since it is used
a lot of times.

Signed-off-by: Jan Kara <jack@suse.cz>
2015-01-07 13:46:16 +01:00
Jan Kara e159332b9a udf: Verify i_size when loading inode
Verify that inode size is sane when loading inode with data stored in
ICB. Otherwise we may get confused later when working with the inode and
inode size is too big.

CC: stable@vger.kernel.org
Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-12-19 13:13:05 +01:00
Jan Kara 6174c2eb8e udf: Fix loading of special inodes
Some UDF media have special inodes (like VAT or metadata partition
inodes) whose link_count is 0. Thus commit 4071b91362 (udf: Properly
detect stale inodes) broke loading these inodes because udf_iget()
started returning -ESTALE for them. Since we still need to properly
detect stale inodes queried by NFS, create two variants of udf_iget() -
one which is used for looking up special inodes (which ignores
link_count == 0) and one which is used for other cases which return
ESTALE when link_count == 0.

Fixes: 4071b91362
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-09 13:06:14 +02:00
Jan Kara 470cca56c3 udf: Set i_generation field
Currently UDF doesn't initialize i_generation in any way and thus NFS
can easily get reallocated inodes from stale file handles. Luckily UDF
already has a unique object identifier associated with each inode -
i_unique. Use that for initialization of i_generation.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:37:40 +02:00
Jan Kara 4071b91362 udf: Properly detect stale inodes
NFS can easily ask for inodes that are already deleted. Currently UDF
happily returns such inodes which is a bug. Return -ESTALE if
udf_read_inode() is asked to read deleted inode.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:37:39 +02:00
Jan Kara 6d3d5e860a udf: Make udf_read_inode() and udf_iget() return error
Currently __udf_read_inode() wasn't returning anything and we found out
whether we succeeded reading inode by checking whether inode is bad or
not. udf_iget() returned NULL on failure and inode pointer otherwise.
Make these two functions properly propagate errors up the call stack and
use the return value in callers.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 21:36:35 +02:00
Jan Kara c03aa9f6e1 udf: Avoid infinite loop when processing indirect ICBs
We did not implement any bound on number of indirect ICBs we follow when
loading inode. Thus corrupted medium could cause kernel to go into an
infinite loop, possibly causing a stack overflow.

Fix the possible stack overflow by removing recursion from
__udf_read_inode() and limit number of indirect ICBs we follow to avoid
infinite loops.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 14:12:29 +02:00
Jan Kara bb7720a0b4 udf: Fold udf_fill_inode() into __udf_read_inode()
There's no good reason to separate these since udf_fill_inode() is
called only from __udf_read_inode() and both do part of the same thing.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 13:32:50 +02:00
Jan Kara 8a70ee3307 udf: Avoid dir link count to go negative
If we are writing back inode of unlinked directory, its link count ends
up being (u16)-1. Although the inode is deleted, udf_iget() can load the
inode when NFS uses stale file handle and get confused.

Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-04 11:47:51 +02:00
Al Viro 31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Johannes Weiner 91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Jan Kara 09ebb17ab4 udf: Fix data corruption on file type conversion
UDF has two types of files - files with data stored in inode (ICB in
UDF terminology) and files with data stored in external data blocks. We
convert file from in-inode format to external format in
udf_file_aio_write() when we find out data won't fit into inode any
longer. However the following race between two O_APPEND writes can happen:

CPU1					CPU2
udf_file_aio_write()			udf_file_aio_write()
  down_write(&iinfo->i_data_sem);
  checks that i_size + count1 fits within inode
    => no need to convert
  up_write(&iinfo->i_data_sem);
					  down_write(&iinfo->i_data_sem);
					  checks that i_size + count2 fits
					    within inode => no need to convert
					  up_write(&iinfo->i_data_sem);
  generic_file_aio_write()
    - extends file by count1 bytes
					  generic_file_aio_write()
					    - extends file by count2 bytes

Clearly if count1 + count2 doesn't fit into the inode, we overwrite
kernel buffers beyond inode, possibly corrupting the filesystem as well.

Fix the problem by acquiring i_mutex before checking whether write fits
into the inode and using __generic_file_aio_write() afterwards which
puts check and write into one critical section.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2014-02-20 21:56:00 +01:00
Kirill A. Shutemov 7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Kent Overstreet a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Namjae Jeon 99600051b0 udf: add extent cache support in case of file reading
This patch implements extent caching in case of file reading.
While reading a file, currently, UDF reads metadata serially
which takes a lot of time depending on the number of extents present
in the file. Caching last accessd extent improves metadata read time.
Instead of reading file metadata from start, now we read from
the cached extent.

This patch considerably improves the time spent by CPU in kernel mode.
For example, while reading a 10.9 GB file using dd:
Time before applying patch:
11677022208 bytes (10.9GB) copied, 1529.748921 seconds, 7.3MB/s
real    25m 29.85s
user    0m 12.41s
sys     15m 34.75s

Time after applying patch:
11677022208 bytes (10.9GB) copied, 1469.338231 seconds, 7.6MB/s
real    24m 29.44s
user    0m 15.73s
sys     3m 27.61s

[JK: Fix bh refcounting issues, simplify initialization]

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Bonggil Bak <bgbak@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2013-01-22 10:48:31 +01:00
Namjae Jeon 6d31d15f21 udf: remove un-needed variable from inode_getblk
The variable last_block is not needed.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Namjae Jeon fb719c59bd udf: don't increment lenExtents while writing to a hole
Incrementing lenExtents even while writing to a hole is bad
for performance as calls to udf_discard_prealloc and
udf_truncate_tail_extent would not return from start if
isize != lenExtents

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Namjae Jeon 2fb7d99d0d udf: fix memory leak while allocating blocks during write
Need to brelse the buffer_head stored in cur_epos and next_epos.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13 16:33:23 +01:00
Linus Torvalds e1cc485262 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext3 & udf fixes from Jan Kara:
 "Shortlog pretty much says it all.

  The interesting bits are UDF support for direct IO and ext3 fix for a
  long standing oops in data=journal mode."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  jbd: Fix assertion failure in commit code due to lacking transaction credits
  UDF: Add support for O_DIRECT
  ext3: Replace 0 with NULL for pointer in super.c file
  udf: add writepages support for udf
  ext3: don't clear orphan list on ro mount with errors
  reiserfs: Make reiserfs_xattr_handlers static
2012-10-04 09:14:01 -07:00
Linus Torvalds 437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Eric W. Biederman c2ba138a27 userns: Convert the udf filesystem to use kuid/kgid where appropriate
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 04:18:54 -07:00
Ian Abbott 5eec54fcde UDF: Add support for O_DIRECT
Add support for the O_DIRECT flag.  There are two cases to deal with:

1. Small files stored in the ICB (inode control block?): just return 0
from the new udf_adinicb_direct_IO() handler to fall back to buffered
I/O.

2. Larger files, not stored in the ICB: nothing special here.  Just call
blockdev_direct_IO() from our new udf_direct_IO() handler and tidy up
any blocks instantiated outside i_size on error.  This is pretty
standard.  Factor error handling code out of udf_write_begin() into new
function udf_write_failed() so it can also be called by udf_direct_IO().

Also change the whitespace in udf_aops to make it a bit neater.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-06 16:20:39 +02:00
Namjae Jeon 378b8e1ad1 udf: add writepages support for udf
Use mpage_writepages() instead of multiple calls to udf_writepage()
to make performance higher.

*Write Speed with writepage() =
 RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    8.56MB/sec    0.00MB/sec    8.20MB/sec
 1048576    0.00MB/sec    8.57MB/sec    0.00MB/sec    6.42MB/sec
  524288    0.00MB/sec    8.59MB/sec    0.00MB/sec    5.24MB/sec
  262144    0.00MB/sec    8.59MB/sec    0.00MB/sec    4.17MB/sec
  131072    0.00MB/sec    8.53MB/sec    0.00MB/sec    3.32MB/sec
   65536    0.00MB/sec    8.49MB/sec    0.00MB/sec    2.31MB/sec

*Write Speed with writepages()
RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    9.88MB/sec    0.00MB/sec    9.60MB/sec
 1048576    0.00MB/sec    9.95MB/sec    0.00MB/sec    7.52MB/sec
  524288    0.00MB/sec    9.98MB/sec    0.00MB/sec    6.16MB/sec
  262144    0.00MB/sec    9.90MB/sec    0.00MB/sec    4.98MB/sec
  131072    0.00MB/sec    9.89MB/sec    0.00MB/sec    3.78MB/sec
   65536    0.00MB/sec    9.81MB/sec    0.00MB/sec    2.50MB/sec

There is about 1.4MB/sec speed improvement over 8.5MB/sec,
which comes out around 16% improvement.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-09-04 00:06:26 +02:00
Ian Abbott bb2b6d19ec udf: fix udf_setsize() for file data in ICB
If the new size is larger than the old size and the old file data was
stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the
new size still fits in the ICB, skip the call to udf_extend_file() as it
does not handle this i_alloc_type value (it calls BUG()).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-08-15 00:21:58 +02:00
Ashish Sangwan a0e589b485 UDF: Remove unnecessary variable "offset" from udf_fill_inode
The variable "offset" is not needed. Remove it.

Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-09 12:03:12 +02:00
Jan Kara dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Steve Nickel b2527bfa53 udf: Fix file entry logicalBlocksRecorded
ECMA 1.67 requires setting logicalBlocksRecorded to zero if the file
has no extents. This should be checked in udf_update_inode().
udf_fill_inode() will then take care of itself.

Signed-off-by: Steven P. Nickel <snickel@focusinfo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-02-29 21:53:47 +01:00
Steve Nickel d5e2cf07c3 udf: Init/maintain file entry checkpoint field
In accordance with ECMA 1.67 Part 4, 14.9.15, the checkpoint field
should be initialized to 1 at creation. (Zero is *not* a valid value.)

Signed-off-by: Steven P. Nickel <snickel@focusinfo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-02-29 21:53:46 +01:00
Linus Torvalds ac69e09280 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2/3/4: delete unneeded includes of module.h
  ext{3,4}: Fix potential race when setversion ioctl updates inode
  udf: Mark LVID buffer as uptodate before marking it dirty
  ext3: Don't warn from writepage when readonly inode is spotted after error
  jbd: Remove j_barrier mutex
  reiserfs: Force inode evictions before umount to avoid crash
  reiserfs: Fix quota mount option parsing
  udf: Treat symlink component of type 2 as /
  udf: Fix deadlock when converting file from in-ICB one to normal one
  udf: Cleanup calling convention of inode_getblk()
  ext2: Fix error handling on inode bitmap corruption
  ext3: Fix error handling on inode bitmap corruption
  ext3: replace ll_rw_block with other functions
  ext3: NULL dereference in ext3_evict_inode()
  jbd: clear revoked flag on buffers before a new transaction started
  ext3: call ext3_mark_recovery_complete() when recovery is really needed
2012-01-09 12:51:21 -08:00
Jan Kara d2eb8c3593 udf: Fix deadlock when converting file from in-ICB one to normal one
During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
format got broken. We call ->writepage with i_data_sem held but udf_get_block()
also acquires i_data_sem thus creating A-A deadlock.

We fix the problem by dropping i_data_sem before calling ->writepage() which is
safe since i_mutex still protects us against any changes in the file. Also fix
pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping
i_data_sem before calling find_or_create_page().

CC: stable@kernel.org
Reported-by: Matthias Matiak <netzpython@mail-on.us>
Tested-by: Matthias Matiak <netzpython@mail-on.us>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09 13:52:08 +01:00
Jan Kara 7b0b0933a3 udf: Cleanup calling convention of inode_getblk()
inode_getblk() always returned NULL and passed results in its parameters.
Make the function return something useful - found block number.

Signed-off-by: Jan Kara <jack@suse.cz>
2012-01-09 13:52:08 +01:00
Al Viro faa17292fd udf: propagate umode_t
note re mount options: fmask and dmask are explicitly truncated to 12bit,
UDF_INVALID_MODE just needs to be guaranteed to differ from any such value.
And umask is used only in &= with umode_t, so we ignore other bits anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:08 -05:00
Linus Torvalds d211858837 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue:
  vfs: add d_prune dentry operation
  vfs: protect i_nlink
  filesystems: add set_nlink()
  filesystems: add missing nlink wrappers
  logfs: remove unnecessary nlink setting
  ocfs2: remove unnecessary nlink setting
  jfs: remove unnecessary nlink setting
  hypfs: remove unnecessary nlink setting
  vfs: ignore error on forced remount
  readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
  vfs: fix dentry leak in simple_fill_super()
2011-11-02 11:41:01 -07:00
Miklos Szeredi bfe8684869 filesystems: add set_nlink()
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Joe Perches a983f368f8 udf: Neaten udf_debug uses
Just whitespace and argument alignment.
Introduce some checkpatch warnings that deserve to be ignored.

Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:58 +01:00
Joe Perches 78ace70c41 udf: Convert printks to pr_<level>
Use the current logging styles.

Convert a few printks that should have been udf_warn and udf_err.
Coalesce formats.  Add #define pr_fmt.
Move an #include "udfdecls.h" above other includes in udftime.c
so pr_fmt works correctly.  Strip prefixes from conversions as appropriate.
Reorder logging definitions in udfdecl.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:52 +01:00
Namjae Jeon bc1123239a udf: Add readpages support for udf.
Use mpage_readpages() instead of multiple calls to udf_readpage() to reduce the
CPU utilization and make performance higher.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-06 00:13:48 +02:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00