We're calling it to setup that event, and we'll need it later to decide
if the bpf-output event we're handling is the one setup for a specific
purpose, return it using ERR_PTR, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zhachv7il2n1lopt9aonwhu7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is just bpf__strerror_setup_stdout() renamed to the more general
"setup_output_event" method, keep the existing stdout() as a wrapper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nwnveo428qn0b48axj50vkc7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to set up other bpf-output events, for instance to
generate augmented syscall entry tracepoints with pointer contents.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4r7kw0nsyi4vyz6xm1tzx6a3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit will allow BPF script attach to tracepoints.
bpf__foreach_tev() will iterate over all events, not only kprobes.
Rename it to bpf__foreach_event().
Since only group and event are used by caller, there's no need to pass
full 'struct probe_trace_event' to bpf_prog_iter_callback_t. Pass only
these two strings. After this patch bpf_prog_iter_callback_t natually
support tracepoints.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468406646-21642-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows cloning bpf-output event configuration among multiple
bpf scripts. If there exist a map named '__bpf_output__' and not
configured using 'map:__bpf_output__.event=', this patch clones the
configuration of another '__bpf_stdout__' map. For example, following
command:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c usleep 100000
equals to:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c/map:__bpf_stdout__.event=evt/ \
usleep 100000
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460128045-97310-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces basic facilities to support config different slots
in a BPF map one by one.
array.nr_ranges and array.ranges are introduced into 'struct
parse_events_term', where ranges is an array of indices range (start,
length) which will be configured by this config term. nr_ranges is the
size of the array. The array is passed to 'struct bpf_map_priv'. To
indicate the new type of configuration, BPF_MAP_KEY_RANGES is added as a
new key type. bpf_map_config_foreach_key() is extended to iterate over
those indices instead of all possible keys.
Code in this commit will be enabled by following commit which enables
the indices syntax for array configuration.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf__config_obj() is introduced as a core API to config BPF object after
loading. One configuration option of maps is introduced. After this
patch BPF object can accept assignments like:
map:my_map.value=1234
(map.my_map.value looks pretty. However, there's a small but hard to fix
problem related to flex's greedy matching. Please see [1]. Choose ':'
to avoid it in a simpler way.)
This patch is more complex than the work it does because the
consideration of extension. In designing BPF map configuration, the
following things should be considered:
1. Array indices selection: perf should allow user setting different
value for different slots in an array, with syntax like:
map:my_map.value[0,3...6]=1234;
2. A map should be set by different config terms, each for a part
of it. For example, set each slot to the pid of a thread;
3. Type of value: integer is not the only valid value type. A perf
counter can also be put into a map after commit 35578d7984
("bpf: Implement function bpf_perf_event_read() that get the
selected hardware PMU counter")
4. For a hash table, it should be possible to use a string or other
value as a key;
5. It is possible that map configuration is unable to be setup
during parsing. A perf counter is an example.
Therefore, this patch does the following:
1. Instead of updating map element during parsing, this patch stores
map config options in 'struct bpf_map_priv'. Following patches
will apply those configs at an appropriate time;
2. Link map operations in a list so a map can have multiple config
terms attached, so different parts can be configured separately;
3. Make 'struct bpf_map_priv' extensible so that the following patches
can add new types of keys and operations;
4. Use bpf_obj_config__map_funcs array to support more map config options.
Since the patch changing the event parser to parse BPF object config is
relative large, I've put it in another commit. Code in this patch can be
tested after applying the next patch.
[1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following patches are going to introduce BPF object level configuration
to enable setting values into BPF maps. To avoid confusion, this patch
renames existing 'config' in bpf-loader.c to 'program config'. Following
patches would introduce 'object config'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448614067-197576-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch generates a prologue for a BPF program which fetches arguments for
it. With this patch, the program can have arguments as follow:
SEC("lock_page=__lock_page page->flags")
int lock_page(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
This patch passes at most 3 arguments from r3, r4 and r5. r1 is still the ctx
pointer. r2 is used to indicate if dereferencing was done successfully.
This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack pointer
for result. Result of each arguments first store on stack:
low address
BPF_REG_FP - 24 ARG3
BPF_REG_FP - 16 ARG2
BPF_REG_FP - 8 ARG1
BPF_REG_FP
high address
Then loaded into r3, r4 and r5.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Committer note:
At least testing if it builds and loads:
# cat test_probe_arg.c
struct pt_regs;
__attribute__((section("lock_page=__lock_page page->flags"), used))
int func(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
# perf record -e ./test_probe_arg.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
# perf evlist
perf_bpf_probe:lock_page
#
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new syntax to the BPF object section name to support
probing at uprobe event. Now we can use BPF program like this:
SEC(
"exec=/lib64/libc.so.6;"
"libcwrite=__write"
)
int libcwrite(void *ctx)
{
return 1;
}
Where, in section name of a program, before the main config string, we
can use 'key=value' style options. Now the only option key is "exec",
for uprobes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-4-git-send-email-wangnan0@huawei.com
[ Changed the separator from \n to ; ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds BPF testcase for testing BPF event filtering.
By utilizing the result of 'perf test LLVM', this patch compiles the
eBPF sample program then test its ability. The BPF script in 'perf test
LLVM' lets only 50% samples generated by epoll_pwait() to be captured.
This patch runs that system call for 111 times, so the result should
contain 56 samples.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-8-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A series of bpf loader related error codes were introduced to help error
reporting. Functions were improved to return these new error codes.
Functions which return pointers were adjusted to encode error codes into
return value using the ERR_PTR() interface.
bpf_loader_strerror() was improved to convert these error messages to
strings. It checks the error codes and calls libbpf_strerror() and
strerror_r() accordingly, so caller don't need to consider checking the
range of the error code.
In bpf__strerror_load(), print kernel version of running kernel and the
object's 'version' section to notify user how to fix his/her program.
v1 -> v2:
Use macro for error code.
Fetch error message based on array index, eliminate for-loop.
Print version strings.
Before:
# perf record -e ./test_kversion_nomatch_program.o sleep 1
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
After:
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ 'version' (4.4.0) doesn't match running kernel (4.3.0)
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com
[ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'bpf-loader.[ch]' files are introduced in this patch. Which will be
the interface between perf and libbpf. bpf__prepare_load() resides in
bpf-loader.c. Following patches will enrich these two files.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo