Commit Graph

180 Commits

Author SHA1 Message Date
Matan Barak dd5f03beb4 IB/core: Ethernet L2 attributes in verbs/cm structures
This patch add the support for Ethernet L2 attributes in the
verbs/cm/cma structures.

When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority
in a similar manner that the IB L2 (and the L4 PKEY) attributes are used.

Thus, those attributes were added to the following structures:

* ib_ah_attr - added dmac
* ib_qp_attr - added smac and vlan_id, (sl remains vlan priority)
* ib_wc - added smac, vlan_id
* ib_sa_path_rec - added smac, dmac, vlan_id
* cm_av - added smac and vlan_id

For the path record structure, extra care was taken to avoid the new
fields when packing it into wire format, so we don't break the IB CM
and SA wire protocol.

On the active side, the CM fills. its internal structures from the
path provided by the ULP.  We add there taking the ETH L2 attributes
and placing them into the CM Address Handle (struct cm_av).

On the passive side, the CM fills its internal structures from the WC
associated with the REQ message.  We add there taking the ETH L2
attributes from the WC.

When the HW driver provides the required ETH L2 attributes in the WC,
they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core
code checks for the presence of these flags, and in their absence does
address resolution from the ib_init_ah_from_wc() helper function.

ib_modify_qp_is_ok is also updated to consider the link layer. Some
parameters are mandatory for Ethernet link layer, while they are
irrelevant for IB.  Vendor drivers are modified to support the new
function signature.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14 14:20:54 -08:00
Matan Barak 4de6580360 mlx4_core: Add support for steerable IB UD QPs
This patch adds support for allocating IB UD QPs that we can steer
traffic from.  We introduce a new firmware command FLOW_STEERING_IB_UC_QP_RANGE
and a capability bit.

This command isn't supported for VFs.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14 14:06:50 -08:00
Or Gerlitz 7ffdf726cf net/mlx4_core: Add basic support for TCP/IP offloads under tunneling
Add the low-level device commands and definitions used for TCP/IP HW offloads
of tunneled/vxlan traffic which are supported by the ConnectX3-pro NIC.

This is done through the following elements:

 - read tunneling device caps in QUERY_DEV_CAP
 - add helper function to do SET_PORT for tunneling
 - add DMFS VXLAN steering rule definitions
 - add CQE and WQE checksum offload field definitions

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 14:31:43 -05:00
Hadar Hen Zion 8e1a28e8e6 net/mlx4_core: Expose physical port id as PF/VF capability
Add the infrastructure needed to support ndo_get_phys_port_id which
allows users to identify to which physical port a net-device is connected
to by reading a unique port id.
This will work for VFs and PFs.
The driver uses a new device capability - phys_port_id, The PF driver
reads the port phys_port_id from Firmware and stores it. The VF driver
reads the port phys_port_id from the PF using QUERY_FUNC_CAP command.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19 19:04:43 -05:00
Eugenia Emantayev 163561a4e2 net/mlx4_en: Datapath structures are allocated per NUMA node
For each RX/TX ring and its CQ, allocation is done on a NUMA node that
corresponds to the core that the data structure should operate on.
The assumption is that the core number is reflected by the ring index.
The affected allocations are the ring/CQ data structures,
the TX/RX info and the shared HW/SW buffer.
For TX rings, each core has rings of all UPs.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:22:48 -05:00
Eugenia Emantayev 6e7136ed77 net/mlx4_core: ICM pages are allocated on device NUMA node
This is done to optimize FW/HW access to host memory.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:22:48 -05:00
Jack Morgenstein 5a0d0a6161 mlx4: Structures and init/teardown for VF resource quotas
This is step #1 for implementing SRIOV resource quotas for VFs.

Quotas are implemented per resource type for VFs and the PF, to prevent
any entity from simply grabbing all the resources for itself and leaving
the other entities unable to obtain such resources.

Resources which are allocated using quotas:  QPs, CQs, SRQs, MPTs, MTTs, MAC,
                                             VLAN, and Counters.

The quota system works as follows:
Each entity (VF or PF) is given a max number of a given resource (its quota),
and a guaranteed minimum number for each resource (starvation prevention).

For QPs, CQs, SRQs, MPTs and MTTs:
50% of the available quantity for the resource is divided equally among
the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module
parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool.
The other 50% is the "free pool", allocated on a first-come-first-serve basis.
For each VF/PF, resources are first allocated from its "guaranteed-minimum"
pool. When that pool is exhausted, the driver attempts to allocate from
the resource "free-pool".

The quota (i.e., max) for the VFs and the PF is:
  The free-pool amount (50% of the real max) + the guaranteed minimum

For MACs:
  Guarantee 2 MACs per VF/PF per port. As a result, since we have only
  128 MACs per port, reduce the allowable number of VFs from 64 to 63.
  Any remaining MACs are put into a free pool.

For VLANs:
  For the PF, the per-port quota is 128 and guarantee is 64
     (to allow the PF to register at least a VLAN per VF in VST mode).
  For the VFs, the per-port quota is 64 and the guarantee is 0.
      We assume that VGT VFs are trusted not to abuse the VLAN resource.

For Counters:
  For all functions (PF and VFs), the quota is 128 and the guarantee is 0.

In this patch, we define the needed structures, which are added to the
resource-tracker struct.  In addition, we do initialization
for the resource quota, and adjust the query_device response to use quotas
rather than resource maxima.

As part of the implementation, we introduce a new field in
mlx4_dev: quotas.  This field holds the resource quotas used
to report maxima to the upper layers (ib_core, via query_device).

The HCA maxima of these values are passed to the VFs (via
QUERY_HCA) so that they may continue to use these in handling
QPs, CQs, SRQs and MPTs.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 16:19:07 -05:00
Jack Morgenstein 2009d0059c net/mlx4_en: Use vlan id instead of vlan index for unregistration
Use of vlan_index created problems unregistering vlans on guests.

In addition, tools delete vlan by tag, not by index, lets follow that.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 16:19:07 -05:00
Jack Morgenstein acddd5dd44 net/mlx4_core: Fix reg/unreg vlan/mac to conform to the firmware spec
The functions mlx4_register_vlan, mlx4_unregister_vlan, mlx4_register_mac,
mlx4_unregister_mac all made illegal use of the out_param in multifunc mode
to pass the port number. The firmware spec specifies that the port number
should be passed in bits 8..15 of the input-modifier field for ALLOC_RES and
FREE_RES (sections 20.15.1 and 20.15.2).

For MAC register/unregister, this patch contains workarounds so that guests
running previous kernels continue to work on a new Hypervisor, and guests
running the new kernel will continue to work on old hypervisors.

Vlan registeration capability is still not operational in multifunction mode,
since the vlan wrapper functions are not implemented in this patch.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04 16:19:06 -05:00
Or Gerlitz 5930e8d0ab net/mlx4: Fix typo, move similar defs to same location
Small code cleanup:

1. change MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN to MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN

2. put MLX4_SET_PORT_PRIO2TC and MLX4_SET_PORT_SCHEDULER in the same union with the
   other MLX4_SET_PORT_yyy

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:10:50 -04:00
Linus Torvalds cc998ff881 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...
2013-09-05 14:54:29 -07:00
Hadar Hen Zion f77c0162a3 IB/mlx4: Add receive flow steering support
Implement ib_create_flow() and ib_destroy_flow().

Translate the verbs structures provided by the user to HW structures
and call the MLX4_QP_FLOW_STEERING_ATTACH/DETACH firmware commands.

On the ATTACH command completion, the firmware provides a 64-bit
registration ID, which is placed into struct mlx4_ib_flow that wraps
the instance of struct ib_flow which is retuned to caller.  Later,
this reg ID is used for detaching that flow from the firmware.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-28 09:53:56 -07:00
Joe Perches 574e2af7c0 include: Convert ethernet mac address declarations to use ETH_ALEN
It's convenient to have ethernet mac addresses use
ETH_ALEN to be able to grep for them a bit easier and
also to ensure that the addresses are __aligned(2).

Add #include <linux/if_ether.h> as necessary.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 12:33:54 -07:00
Yevgeny Petrilin fe6f700d6c net/mlx4_core: Respond to operation request by firmware
This commit adds new firmware command and new firmware event.  The firmware
raises the MLX4_EVENT_TYPE_OP_REQUIRED event in order to signal the driver it
needs to perform an administrative operation throughout the MLX4_CMD_GET_OP_REQ
command. At the moment the supported operation is adding/removing multicast
entries which are used by the firmware for handling NCSI traffic in B0
steering mode.

Also, had to swap the order of mlx4_init_mcg_table() and
mlx4_init_eq_table() to make sure that driver will get events only after
resources are initialized to handle it.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 01:12:40 -07:00
Jack Morgenstein b01978cacf net/mlx4_core: Dynamic VST to VST vlan/qos changes
Within VST mode, enable modifying the vlan and/or qos
for a VF without requiring unbind/rebind.

This requires firmware which supports the UPDATE_QP command.
(If the command is not available, we fall back to requiring
unbind/bind to activate these changes).

To avoid race conditions with modify-qp on QPs that are affected
by update-qp, this operation is performed on the comm_wq.

If the update operation succeeds for all the necessary QPs, a
vlan_unregister is performed for the abandoned vlan id.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 13:10:22 -07:00
Linus Torvalds e0fd9affeb InfiniBand/RDMA changes for the 3.10 merge window:
- XRC transport fixes
  - Fix DHCP on IPoIB
  - mlx4 preparations for flow steering
  - iSER fixes
  - miscellaneous other fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRisChAAoJEENa44ZhAt0hHLoP/iX5MxtHJ3X1u5KcARX/7nci
 CCH/VnD172re/KavCCg7zkbZQpS4jHCtW/CzLUCSPqBGOaj78HFTUkB3ragvUW7m
 ndERwplF8DP/i0x7Kk7Wau2a4RdlH0lqwucOjqTyQnbIdxknkz6w3Jcsb9Ic2lzx
 up0T0HaHtTxdVF6lXOB5QOIpUGg3l0Yu4euX2BA61WDoZj+VIYhgeWZewq0iV0D1
 rLtarJ+Or7mdwu2rNcDHgrD0lhF4SCBd3rx4lbc4F68Cr8JUz0Xe7liPLNskeLhW
 f3NEm3gmkYp9YI1otGsA0X/CyV6wnRk4mT8JMlOb2WNzeq2V13Z54/9ZyF5/gFD2
 JgzkQB9Ibf7EmTwXWd6+0+FA40Q6dNvnRnhddRM255dvDVw7nxUr2UzYH4Re/Z9K
 rNFjkvix2YUwEmoPjitWocz2kj2reDMqjtiVDmdGy1YbtnicH5GtkQsWkoPg8ON9
 m5jORUdzydTD+yBJwTiFP1EuFoG3TdfoZ7zHMJwWy/u8i308xD6WPGms9MTdjh8j
 7gjz2TCKr+vpuVRh/p6esCPPOTSsSeWDeowy7Sgpdf3qoqAImXsWXVrl2kXLhtyl
 1VIgHU3ztm7oqwmy0gQ/zVCo4CLLdsif2zmEIDpxJPnWaSq+D9LJdyLTcfdBjhQ8
 9SjUafe4msT1pIjNb7ND
 =1ojD
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes from Roland Dreier:
 - XRC transport fixes
 - Fix DHCP on IPoIB
 - mlx4 preparations for flow steering
 - iSER fixes
 - miscellaneous other fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits)
  IB/iser: Add support for iser CM REQ additional info
  IB/iser: Return error to upper layers on EAGAIN registration failures
  IB/iser: Move informational messages from error to info level
  IB/iser: Add module version
  mlx4_core: Expose a few helpers to fill DMFS HW strucutures
  mlx4_core: Directly expose fields of DMFS HW rule control segment
  mlx4_core: Change a few DMFS fields names to match firmare spec
  mlx4: Match DMFS promiscuous field names to firmware spec
  mlx4_core: Move DMFS HW structs to common header file
  IB/mlx4: Set link type for RAW PACKET QPs in the QP context
  IB/mlx4: Disable VLAN stripping for RAW PACKET QPs
  mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level
  RDMA/iwcm: Don't touch cmid after dropping reference
  IB/qib: Correct qib_verbs_register_sysfs() error handling
  IB/ipath: Correct ipath_verbs_register_sysfs() error handling
  RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled
  SRPT: Fix odd use of WARN_ON()
  IPoIB: Fix ipoib_hard_header() return value
  RDMA: Rename random32() to prandom_u32()
  RDMA/cxgb3: Fix uninitialized variable
  ...
2013-05-08 15:29:48 -07:00
Rony Efraim e6b6a23163 net/mlx4: Add VF MAC spoof checking support
Add ndo_set_vf_spoofchk support

Signed-off-by: Rony Efraim <ronye@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26 23:29:14 -04:00
Rony Efraim 3f7fb021d0 net/mlx4: Add set VF default vlan ID and priority support
Add support to ndo_set_vf_vlan in the driver. Once this call is used the vport
is considered to be in VST mode. In this mode, the PPF driver configures
Ethernet QPs created by this VF to use this vlan id and priority. Currently
RoCE isn't supported on that mode.

The special values of VID=4095 or VID=0,UP=0 are considered as VGT.

Signed-off-by: Rony Efraim <ronye@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26 23:29:13 -04:00
Hadar Hen Zion c2c19dc3c9 mlx4_core: Expose a few helpers to fill DMFS HW strucutures
Re-arrange some of code which fills DMFS HW structures so we can use
it from within the core driver and from the IB driver too, e.g when
verbs DMFS structures are transformed into mlx4 hardware structs.

Also, add struct mlx4_flow_handle struct which will be of use by the
DMFS verbs flow in the IB driver.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24 17:51:30 -07:00
Hadar Hen Zion bcf372971d mlx4_core: Directly expose fields of DMFS HW rule control segment
Some of struct mlx4_net_trans_rule_hw_ctrl fields were packed into u32
and accessed through bit field operations.  Expose and access them
directly as u8 or u16.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24 17:51:29 -07:00
Hadar Hen Zion ba60a3560c mlx4_core: Change a few DMFS fields names to match firmare spec
Change struct mlx4_net_trans_rule_hw_eth :: vlan_id name to vlan_tag

Change struct mlx4_net_trans_rule_hw_ib :: r_u_qpn name to l3_qpn

The patch doesn't introduce any functional change or API change
towards the firmware.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24 17:51:29 -07:00
Hadar Hen Zion f91625398a mlx4: Match DMFS promiscuous field names to firmware spec
Align the names used by enum mlx4_net_trans_promisc_mode with the
actual firmware specification.  The patch doesn't introduce any
functional change or API change towards the firmware.

Remove MLX4_FS_PROMISC_FUNCTION_PORT which isn't of use.  Add new
enums MLX4_FS_{UC/MC}_SNIFFER as a preparation step for sniffer
support.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24 17:51:29 -07:00
Hadar Hen Zion 3cd0e1789a mlx4_core: Move DMFS HW structs to common header file
Move flow steering HW structures to be on the public mlx4 include
directory, as a pre-step for the mlx4 IB driver to use them too.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24 17:51:28 -07:00
Amir Vadai ec693d4701 net/mlx4_en: Add HW timestamping (TS) support
The patch allows to enable/disable HW timestamping for incoming and/or
outgoing packets. It adds and initializes all structs and callbacks
needed by kernel TS API.
To enable/disable HW timestamping appropriate ioctl should be used.
Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are
supported.
When enabling TS on receive flow - VLAN stripping will be disabled.
Also were made all relevant changes in RX/TX flows to consider TS request
and plant HW timestamps into relevant structures.
mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 16:30:14 -04:00
Eugenia Emantayev ddd8a6c12d net/mlx4_core: Read HCA frequency and map internal clock
Read HCA frequency, read PCI clock bar and offset, map internal clock to
PCI bar.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 16:30:13 -04:00
Eugenia Emantayev d998735f44 net/mlx4_core: Add timestamping device capability
Add new device capability for timestamping support and query FW to retrieve it.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 16:30:13 -04:00
Or Gerlitz 540b3a39ee net/mlx4_en: Enable DCB ETS ops only when supported by the firmware
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards
which don't support ETS, advertize only PFC DCB ops.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07 16:55:46 -04:00
Linus Torvalds 70a3a06d01 Main batch of InfiniBand/RDMA changes for 3.9:
- SRP error handling fixes from Bart Van Assche
  - Implementation of memory windows for mlx4 from Shani Michaeli
  - Lots of cxgb4 HW driver fixes from Vipul Pandya
  - Make iSER work for virtual functions, other fixes from Or Gerlitz
  - Fix for bug in qib HW driver from Mike Marciniszyn
  - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman
  - Various cleanups and warning fixes from Julia Lawall, Paul Bolle, Wei Yongjun
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRLPNoAAoJEENa44ZhAt0h0bMP/1xqlgDR3DGdoUoV4yTd6O9G
 Uccdb7og5o5tedVo+8xZz01y4at99P8FWW4hJ4os6k8n6yKoBVwo7qjN+BOR+JG5
 q8+O+ynUSIg4tGrb5sXcMnKXAXbw/vkftMWYNA41cbrM24DTYzB/2SLpvhwbFoTT
 tdQc2tgz5QaDqzWbagyCR4+k/IgO+Llrz/RvIdtz4dsTnTDogN7QCoSffX8n/Lpb
 DxtyXK4sdl3DAtd3CsIdsB/TSMb3RkHLCoSvmrWlLnqMdsbRxVnCVfBm4BOghW3J
 Y2K3joRoCjjIZSRNs/i0FMFkT/jbCXg1oXg9ek/a6YFNcgyk7z8iGyXrRY7fOnno
 8U2SfxJ69YpVYeJr+DSjaeHcmjsaYU7NN7JPxzvPKcJOIsxQJ/euJDXAXau3lEQY
 o9/p4JsGty0WHi1NanyygvghvBAoP1C5/59Sl4bHH5gckPyJT1kinPSCTT76YXGS
 WkSHg2mDhiJHy7Pnuy85iZldPoy2/5z09/I4aGMeL+8kUZbD4iFqzXIJU0HTsAim
 EONoRXDhIcN5DNVSVH1ig6nJ2a7Vhov4Z0r/vB8P4KhslBcqFwf2leC0eCoe5mNt
 SzcKhqosZDXoL8AwzpntzGIOid8pWmHbUx/PgIcoVXPjtl0h2ULNIFoYYyMZ3cyU
 AyN2tSiUZVddTV1/aKGL
 =RAQw
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband update from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.9:

   - SRP error handling fixes from Bart Van Assche

   - Implementation of memory windows for mlx4 from Shani Michaeli

   - Lots of cxgb4 HW driver fixes from Vipul Pandya

   - Make iSER work for virtual functions, other fixes from Or Gerlitz

   - Fix for bug in qib HW driver from Mike Marciniszyn

   - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman

   - Various cleanups and warning fixes from Julia Lawall, Paul Bolle,
     Wei Yongjun"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits)
  IB/mlx4: Advertise MW support
  IB/mlx4: Support memory window binding
  mlx4: Implement memory windows allocation and deallocation
  mlx4_core: Enable memory windows in {INIT, QUERY}_HCA
  mlx4_core: Disable memory windows for virtual functions
  IPoIB: Free ipoib neigh on path record failure so path rec queries are retried
  IB/srp: Fail I/O requests if the transport is offline
  IB/srp: Avoid endless SCSI error handling loop
  IB/srp: Avoid sending a task management function needlessly
  IB/srp: Track connection state properly
  IB/mlx4: Remove redundant NULL check before kfree
  IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable
  IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool
  IB/iser: Enable iser when FMRs are not supported
  IB/iser: Avoid error prints on EAGAIN registration failures
  IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML
  IB/uverbs: Implement memory windows support in uverbs
  IB/core: Add "type 2" memory windows support
  mlx4_core: Propagate MR deregistration failures to caller
  mlx4_core: Rename MPT-related functions to have mpt_ prefix
  ...
2013-02-26 11:41:08 -08:00
Shani Michaeli 804d6a89a5 mlx4: Implement memory windows allocation and deallocation
Implement MW allocation and deallocation in mlx4_core and mlx4_ib.
Pass down the enable bind flag when registering memory regions.

Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25 10:44:32 -08:00
Shani Michaeli 6108372070 mlx4_core: Propagate MR deregistration failures to caller
MR deregistration fails when memory windows are bound to the MR.
Handle such failures by propagating them to the caller ULP.

Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21 11:38:43 -08:00
Yan Burman 16a10ffd20 net/mlx4: Move Ethernet related functionality from mlx4_core to mlx4_en
Move low level code that deals with management of Ethernet MACs and QPs from mlx4_core to mlx4_en.
Also convert the new functions to deal with MACs in form of char array instead of u64.

Actual functions moved:
mlx4_replace_mac
mlx4_get_eth_qp
mlx4_put_eth_qp

To conduct this change, some functionality had to be exported from the core,
the following functions were added:
mlx4_get_base_qp
__mlx4_replace_mac (low level function for CX1/A0 compatibility)

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-07 23:26:12 -05:00
Matan Barak 955154fa33 net/mlx4_en: Don't reassign port mac address on firmware that supports it
Mac reassignments should only be done when not supported by the firmware. To
accomplish that, checking firmware capability bit to know whether we should
reassign macs in the driver.

Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31 12:48:47 -05:00
Jack Morgenstein 3c439b5586 mlx4_core: Allow choosing flow steering mode
Device managed flow steering will be enabled only under administrator
directive provided through setting the existing module parameter
log_num_mgm_entry_size to -1 (if the device actually supports flow
steering).  If flow steering isn't requested or not available, the
driver will use the value of log_num_mgm_entry_size and B0 steering.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-12-19 11:47:22 -08:00
Or Gerlitz 08ff32352d mlx4: 64-byte CQE/EQE support
ConnectX-3 devices can use either 64- or 32-byte completion queue
entries (CQEs) and event queue entries (EQEs).  Using 64-byte
EQEs/CQEs performs better because each entry is aligned to a complete
cacheline.  This patch queries the HCA's capabilities, and if it
supports 64-byte CQEs and EQES the driver will configure the HW to
work in 64-byte mode.

The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ.

Since this mode is global, userspace (libmlx4) must be updated to work
with the configured CQE size, and guests using SR-IOV virtual
functions need to know both EQE and CQE size.

In case one of the 64-byte CQE/EQE capabilities is activated, the
patch makes sure that older guest drivers that use the QUERY_DEV_FUNC
command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that
they need an update to be able to work with the PPF. This is done by
changing the returned pf_context_behaviour not to be zero any more. In
case none of these capabilities is activated that value remains zero
and older guest drivers can run OK.

The SRIOV related flow is as follows

1. the PPF does the detection of the new capabilities using
   QUERY_DEV_CAP command.

2. the PPF activates the new capabilities using INIT_HCA.

3. the VF detects if the PPF activated the capabilities using
   QUERY_HCA, and if this is the case activates them for itself too.

Note that the VF detects that it must be aware to the new PF behaviour
using QUERY_FUNC_CAP.  Steps 1 and 2 apply also for native mode.

User space notification is done through a new field introduced in
struct mlx4_ib_ucontext which holds device capabilities for which user
space must take action. This changes the binary interface so the ABI
towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only
when **needed** i.e. only when the driver does use 64-byte CQEs or
future device capabilities which must be in sync by user space. This
practice allows to work with unmodified libmlx4 on older devices (e.g
A0, B0) which don't support 64-byte CQEs.

In order to keep existing systems functional when they update to a
newer kernel that contains these changes in VF and userspace ABI, a
module parameter enable_64b_cqe_eqe must be set to enable 64-byte
mode; the default is currently false.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-26 10:19:17 -08:00
Jack Morgenstein 47605df953 mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculations
Previously, the structure of a guest's proxy QPs followed the
structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1,
qp1 port 2, ...).  The guest then did offset calculations on the
sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP().

This is now changed so that the guest does no offset calculations
regarding proxy or tunnel QPs to use.  This change frees the PPF from
needing to adhere to a specific order in allocating proxy and tunnel
QPs.

Now QUERY_FUNC_CAP provides each port individually with its proxy
qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are
used directly where required (with no offset calculations).

To accomplish this change, several fields were added to the phys_caps
structure for use by the PPF and by non-SR-IOV mode:

    base_sqpn -- in non-sriov mode, this was formerly sqp_start.
    base_proxy_sqpn -- the first physical proxy qp number -- used by PPF
    base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF.

The current code in the PPF still adheres to the previous layout of
sqps, proxy-sqps and tunnel-sqps.  However, the PPF can change this
layout without affecting VF or (paravirtualized) PF code.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:43 -07:00
Jack Morgenstein afa8fd1db9 mlx4: Paravirtualize Node Guids for slaves
This is necessary in order to support > 1 VF/PF in a VM for software
that uses the node guid as a discriminator, such as librdmacm.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:43 -07:00
Jack Morgenstein 026149cbaa mlx4: Activate SR-IOV mode for IB
Remove the error returns for IB ports from mlx4_ib_add,
mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper.

Currently, SRIOV is supported only for devices for which the
link layer is IB on all ports; RoCE support will be added later.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:42 -07:00
Jack Morgenstein efcd235d73 net/mlx4_core: Adjustments to SET_PORT for IB SR-IOV
1. Slaves may not set the IS_SM capability for the port.
2. DEV_MGMT may not be set in multifunction mode.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:40 -07:00
Jack Morgenstein 993c401e20 mlx4_core: Add IB port-state machine and port mgmt event propagation
For an IB port, a slave should not show port active until that slave
has a valid alias-guid (provided by the subnet manager).  Therefore
the port-up event should be passed to a slave only after both the port
is up, and the slave's alias-guid has been set.

Also, provide the infrastructure for propagating port-management
events (client-reregister, etc) to slaves.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:37 -07:00
Jack Morgenstein 54679e1482 mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop
This requires:

1. Replacing the paravirtualized P_Key index (inserted by the guest)
   with the real P_Key index.

2. For UD QPs, placing the guest's true source GID index in the
   address path structure mgid field, and setting the ud_force_mgid
   bit so that the mgid is taken from the QP context and not from the
   WQE when posting sends.

3. For UC and RC QPs, placing the guest's true source GID index in the
   address path structure mgid field.

4. For tunnel and proxy QPs, setting the Q_Key value reserved for that
   proxy/tunnel pair.

Since not all the above adjustments occur in all the QP transitions,
the QP transitions require separate wrapper functions.

Secondly, initialize the P_Key virtualization table to its default
values: Master virtualized table is 1-1 with the real P_Key table,
guest virtualized table has P_Key index 0 mapped to the real P_Key
index 0, and all the other P_Key indices mapped to the reserved
(invalid) P_Key at index 127.

Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache.
and generating events on the master only if a P_Key actually changed.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:33 -07:00
Jack Morgenstein fc06573dfa IB/mlx4: Initialize SR-IOV IB support for slaves in master context
Allocate SR-IOV paravirtualization resources and MAD demuxing contexts
on the master.

This has two parts.  The first part is to initialize the structures to
contain the contexts.  This is done at master startup time in
mlx4_ib_init_sriov().

The second part is to actually create the tunneling resources required
on the master to support a slave.  This is performed the master
detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event
generated when a slave initializes its comm channel).

For the master, there is no such startup event, so it creates its own
tunneling resources when it starts up.  In addition, the master also
creates the real special QPs.  The ib_core layer on the master causes
creation of proxy special QPs, since the master is also
paravirtualized at the ib_core layer.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:32 -07:00
Jack Morgenstein e2c76824ca mlx4_core: Add proxy and tunnel QPs to the reserved QP area
In addition, pass the proxy and tunnel QP numbers to slaves so the
driver can perform special QP paravirtualization.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:31 -07:00
Jack Morgenstein 1ffeb2eb8b IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support
1. Introduce the basic SR-IOV parvirtualization context objects for
   multiplexing and demultiplexing MADs.
2. Introduce support for the new proxy and tunnel QP types.

This patch introduces the objects required by the master for managing
QP paravirtualization for guests.

struct mlx4_ib_sriov is created by the master only.
It is a container for the following:

1. All the info required by the PPF to multiplex and de-multiplex MADs
   (including those from the PF). (struct mlx4_ib_demux_ctx demux)
2. All the info required to manage alias GUIDs (i.e., the GUID at
   index 0 that each guest perceives.  In fact, this is not the GUID
   which is actually at index 0, but is, in fact, the GUID which is at
   index[<VF number>] in the physical table.
3. structures which are used to manage CM paravirtualization
4. structures for managing the real special QPs when running in SR-IOV
   mode.  The real SQPs are controlled by the PPF in this case.  All
   SQPs created and controlled by the ib core layer are proxy SQP.

struct mlx4_ib_demux_ctx contains the information per port needed
to manage paravirtualization:

1. All multicast paravirt info
2. All tunnel-qp paravirt info for the port.
3. GUID-table and GUID-prefix for the port
4. work queues.

struct mlx4_ib_demux_pv_ctx contains all the info for managing the
paravirtualized QPs for one slave/port.

struct mlx4_ib_demux_pv_qp contains the info need to run an individual
QP (either tunnel qp or real SQP).

Note:  We made use of the 2 most significant bits in enum
mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h).
We need these bits in the low-level driver for internal purposes.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-09-30 20:33:30 -07:00
Hadar Hen Zion 7fb40f87c4 net/mlx4_core: Add security check / enforcement for flow steering rules set for VMs
Since VFs may be mapped to VMs which aren't trusted entities,  flow
steering rules attached through the wrapper on behalf of VFs must be
checked to make sure that their L2 specification relate to MAC address
assigned to that VF, and add L2 specification if its missing.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 12:55:59 -04:00
Hadar Hen Zion a8edc3bf05 net/mlx4_core: Put Firmware flow steering structures in common header files
To allow for usage of the flow steering Firmware structures in more locations over the driver,
such as the resource tracker, move them from mcg.c to common header files.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 12:55:59 -04:00
Linus Torvalds 5dedb9f3bd InfiniBand/RDMA changes for the 3.6 merge window:
- Updates to the qib low-level driver
  - First chunk of changes for SR-IOV support for mlx4 IB
  - RDMA CM support for IPv6-only binding
  - Other misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJQDXhUAAoJEENa44ZhAt0hZxwQAJydS9f9me31AGa45SAq8rA8
 6e3LgnQ6jS38he7LZZdSsT7g25jROCKOcTj6VUkNSVAVSkK8zcp7wngjDxw50IK6
 FF9hNeljMkWBflOhxzB34DRGCW4b4J+Yt1o7v1RtawiG/Mhri/6imKL0Aqjt4GwX
 a1MPZn+xI2osLujfdHJtATPWWB9jCaXdFe4DJUNPdqJhS6TN7s8OP3XMiqoJtdaV
 ptHeSSbjdUR1mg/h2LU2FVmWHXNSBxn7MEsrBBRkQVyiEkXieFBLwPTp4DqmAUJf
 xugm6Hf4sbiQ+QuU0baJODt56wveuYVQ4HKUzE0urUFXyU4TUB9blrehWZnKsRte
 wo/w4nvVlnXgGhHH0Igq76RDX8aCwc/6uQJ/29oChWjrei3HE0LjmIlPAu0vAhyw
 ViLe02/r2gKXQv1NxIqhPmGsJTZizg2mUk2eEJHHPQb/NGL7iNo6b+141AfURoqQ
 goGmlGdzffCRpmo6FXFZ57RPVRS4gwMunCY/Pmvq5a2t4oZh8899l2+V3N7bCfvH
 +JdavxAjia9U4IlgPsAqVaz8z8TyHOY/lEd75Wnw8q9www3kLx7hASvHsdwrS4LL
 ihzECzsaXOSoIXQzghs+6iyp1pzmzE9ve8OqbIGJStzlrOLyn7Gjo+Ixwm0SLsTO
 I7h9iJ1OMKFZ8bzmHsWb
 =f09j
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes from Roland Dreier:
 - Updates to the qib low-level driver
 - First chunk of changes for SR-IOV support for mlx4 IB
 - RDMA CM support for IPv6-only binding
 - Other misc cleanups and fixes

Fix up some add-add conflicts in include/linux/mlx4/device.h and
drivers/net/ethernet/mellanox/mlx4/main.c

* tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits)
  IB/qib: checkpatch fixes
  IB/qib: Add congestion control agent implementation
  IB/qib: Reduce sdma_lock contention
  IB/qib: Fix an incorrect log message
  IB/qib: Fix QP RCU sparse warnings
  mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them
  mlx4_core: Allow guests to have IB ports
  mlx4_core: Implement mechanism for reserved Q_Keys
  net/mlx4_core: Free ICM table in case of error
  IB/cm: Destroy idr as part of the module init error flow
  mlx4_core: Remove double function declarations
  IB/mlx4: Fill the masked_atomic_cap attribute in query device
  IB/mthca: Fill in sq_sig_type in query QP
  IB/mthca: Warning about event for non-existent QPs should show event type
  IB/qib: Fix sparse RCU warnings in qib_keys.c
  net/mlx4_core: Initialize IB port capabilities for all slaves
  mlx4: Use port management change event instead of smp_snoop
  IB/qib: RCU locking for MR validation
  IB/qib: Avoid returning EBUSY from MR deregister
  IB/qib: Fix UC MR refs for immediate operations
  ...
2012-07-24 13:56:26 -07:00
Amir Vadai d9236c3f10 {NET,IB}/mlx4: Add rmap support to mlx4_assign_eq
Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap.
If supplied, the assigned IRQ is tracked using rmap infrastructure.

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-19 08:34:37 -07:00
Jack Morgenstein 6634961c14 mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them
To allow easy paravirtualization of P_Key and GID table sizes, keep
paravirtualized sizes in mlx4_dev->caps, but save the actual physical
sizes from FW in struct: mlx4_dev->phys_cap.

In addition, in SR-IOV mode, do the following:

1. Reduce reported P_Key table size by 1.
   This is done to reserve the highest P_Key index for internal use,
   for declaring an invalid P_Key in P_Key paravirtualization.
   We require a P_Key index which always contain an invalid P_Key
   value for this purpose (i.e., one which cannot be modified by
   the subnet manager).  The way to do this is to reduce the
   P_Key table size reported to the subnet manager by 1, so that
   it will not attempt to access the P_Key at index #127.

2. Paravirtualize the GID table size to 1. Thus, each guest sees
   only a single GID (at its paravirtualized index 0).

In addition, since we are paravirtualizing the GID table size to 1, we
add paravirtualization of the master GID event here (i.e., we do not
do ib_dispatch_event() for the GUID change event on the master, since
its (only) GUID never changes).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11 11:52:23 -07:00
Jack Morgenstein 396f2feb05 mlx4_core: Implement mechanism for reserved Q_Keys
The SR-IOV special QP tunneling mechanism uses proxy special QPs
(instead of the real special QPs) for MADs on guests.  These proxy QPs
send their packets to a "tunnel" QP owned by the master.  The master
then forwards the MAD (after any required paravirtualization) to the
real special QP, which sends out the MAD.

For security reasons (i.e., to prevent guests from sending MADs to
tunnel QPs belonging to other guests), each proxy-tunnel QP pair is
assigned a unique, reserved, Q_Key.  These Q_Keys are available only
for proxy and tunnel QPs -- if the guest tries to use these Q_Keys
with other QPs, it will fail.

This patch introduces a mechanism for reserving a block of 64K Q_Keys
for proxy/tunneling use.

The patch introduces also two new fields into mlx4_dev: base_sqpn and
base_tunnel_sqpn.

In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps
are added to the reserved QPN area (so that they will not change).
There are 8 special QPs per port in the HCA, and each of them is
assigned both a proxy and a tunnel QP, for each VF and for the PF as
well in SR-IOV mode.

The QPNs for these QPs are arranged as follows:
 1. The real SQP numbers (8)
 2. The proxy SQPs (8 * (max number of VFs + max number of PFs)
 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs)

To support these QPs, two new fields are added to struct mlx4_dev:

  base_sqp:  this is the QP number of the first of the real SQPs
  base_tunnel_sqp: this is the qp number of the first qp in the tunnel
                   sqp region. (On guests, this is the first tunnel
                   sqp of the 8 which are assigned to that guest).

In addition, in SR-IOV mode, sqp_start is the number of the first
proxy SQP in the proxy SQP region.  (In guests, this is the first
proxy SQP of the 8 which are assigned to that guest)

Note that in non-SR-IOV mode, there are no proxies and no tunnels.
In this case, sqp_start is set to sqp_base -- which minimizes code
changes.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-11 11:35:55 -07:00
Jack Morgenstein 2aca1172c2 net/mlx4_core: Initialize IB port capabilities for all slaves
With IB SR-IOV, each slave has its own separate copy of the port
capabilities flags.  For example, the master can run a subnet manager
(which causes the IsSM bit to be set in the master's port
capabilities) without affecting the port capabilities seen by the
slaves (the IsSM bit will be seen as cleared in the slaves).

Also add a static inline mlx4_master_func_num() to enhance readability
of the code.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-10 09:57:06 -07:00
Jack Morgenstein 00f5ce99dc mlx4: Use port management change event instead of smp_snoop
The port management change event can replace smp_snoop.  If the
capability bit for this event is set in dev-caps, the event is used
(by the driver setting the PORT_MNG_CHG_EVENT bit in the async event
mask in the MAP_EQ fw command).  In this case, when the driver passes
incoming SMP PORT_INFO SET mads to the FW, the FW generates port
management change events to signal any changes to the driver.

If the FW generates these events, smp_snoop shouldn't be invoked in
ib_process_mad(), or duplicate events will occur (once from the
FW-generated event, and once from smp_snoop).

In the case where the FW does not generate port management change
events smp_snoop needs to be invoked to create these events.  The flow
in smp_snoop has been modified to make use of the same procedures as
in the fw-generated-event event case to generate the port management
events (LID change, Client-rereg, Pkey change, and/or GID change).

Port management change event handling required changing the
mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument
(last argument) had to be changed to unsigned long in order to
accomodate passing the EQE pointer.

We also needed to move the definition of struct mlx4_eqe from
net/mlx4.h to file device.h -- to make it available to the IB driver,
to handle port management change events.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-10 09:47:10 -07:00
Jack Morgenstein 752a50cab6 mlx4_core: Pass an invalid PCI id number to VFs
Currently, VFs have 0 in their dev->caps.function field.  This is a
valid pci id (usually of the PF).  Instead, pass an invalid PCI id to
the VF via QUERY_FW, so that if the value gets accessed in the VF
driver, we'll catch the problem.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-07-08 18:05:05 -07:00
Hadar Hen Zion 592e49dda8 net/mlx4: Implement promiscuous mode with device managed flow-steering
The device managed flow steering API has three promiscuous modes:

1. Uplink - captures all the packets that arrive to the port.
2. Allmulti - captures all multicast packets arriving to the port.
3. Function port - for future use, this mode is not implemented yet.

Use these modes with the flow_attach and flow_detach firmware commands
according to the promiscuous state of the netdevice.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07 16:23:06 -07:00
Hadar Hen Zion 0ff1fb654b {NET, IB}/mlx4: Add device managed flow steering firmware API
The driver is modified to support three operation modes.

If supported by firmware use the device managed flow steering
API, that which we call device managed steering mode. Else, if
the firmware supports the B0 steering mode use it, and finally,
if none of the above, use the A0 steering mode.

When the steering mode is device managed, the code is modified
such that L2 based rules set by the mlx4_en driver for Ethernet
unicast and multicast, and the IB stack multicast attach calls
done through the mlx4_ib driver are all routed to use the device
managed API.

When attaching rule using device managed flow steering API,
the firmware returns a 64 bit registration id, which is to be
provided during detach.

Currently the firmware is always programmed during HCA initialization
to use standard L2 hashing. Future work should be done to allow
configuring the flow-steering hash function with common, non
proprietary means.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07 16:23:05 -07:00
Hadar Hen Zion c96d97f4d1 net/mlx4: Set steering mode according to device capabilities
Instead of checking the firmware supported steering mode in various
places in the code, add a dedicated field in the mlx4 device capabilities
structure which is written once during the initialization flow and read
across the code.

This also set the grounds for add new steering modes. Currently two modes
are supported, and are named after the ConnectX HW versions A0 and B0.

A0 steering uses mac_index, vlan_index and priority to steer traffic
into pre-defined range of QPs.

B0 steering uses Ethernet L2 hashing rules and is enabled only
if the firmware supports both unicast and multicast B0 steering,

The current steering modes are relevant for Ethernet traffic only,
such that Infiniband steering remains untouched.

Signed-off-by: Hadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07 16:23:05 -07:00
Marcel Apfelbaum 3fc929e2d6 net/mlx4_core: Fix number of EQs used in ICM initialisation
In SRIOV mode, the number of EQs used when computing the total ICM size
was incorrect.

To fix this, we do the following:
1. We add a new structure to mlx4_dev, mlx4_phys_caps, to contain physical HCA
   capabilities.  The PPF uses the phys capabilities when it computes things
   like ICM size.

   The dev_caps structure will then contain the paravirtualized values, making
   bookkeeping much easier in SRIOV mode. We add a structure rather than a
   single parameter because there will be other fields in the phys_caps.

   The first field we add to the mlx4_phys_caps structure is num_phys_eqs.

2. In INIT_HCA, when running in SRIOV mode, the "log_num_eqs" parameter
   passed to the FW is the number of EQs per VF/PF; each function (PF or VF)
   has this number of EQs available.

   However, the total number of EQs which must be allowed for in the ICM is
   (1 << log_num_eqs) * (#VFs + #PFs).  Rather than compute this quantity,
   we allocate ICM space for 1024 EQs (which is the device maximum
   number of EQs, and which is the value we place in the mlx4_phys_caps structure).

   For INIT_HCA, however, we use the per-function number of EQs as described
   above.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31 18:18:16 -04:00
Linus Torvalds c23ddf7857 InfiniBand/RDMA changes for the 3.5 merge window:
- Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters
  - Add generic and mlx4 support for "raw" QPs: allow suitably privileged
    applications to send and receive arbitrary packets directly to/from
    the hardware
  - Add "doorbell drop" handling to the cxgb4 driver
  - A fairly large batch of qib hardware driver changes
  - A few fixes for lockdep-detected issues
  - A few other miscellaneous fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJPumbZAAoJEENa44ZhAt0h8LgP/0fXe7Szm3n6P6UvMAVqkagM
 4PpreH3mpWUFpzqeQE1JPDtgx700R6aPipbHqgIN+k61RWMpLjICGcNx7iwxn1I+
 zqdquGygWgjceLz+BLVlk+iBmJt3vZ3fPRAXc7fdP+jhIarWkNIOy1pXWTUuRvED
 jL8jIaxhCcgAVzm/zNyt6IPxkaHvCz7K9wqmpyU0dsO9OyPdGvWA9+CkGXwmOCPq
 mxSVhWnfGsMkPBsL7EgTC5KP/ox2PKq6rFgysmVVS+rKCpP0L8BEVQyGX3Gf8KA8
 yV+KdTi9ofDnFrv6R7Wz0v7HRUih8GRssakzBu7Y7HLfK1M/QwMG0GUAibXGZObc
 vUXuQ3uRJ/cIzMPXqKeGYwpb5t+TmxyjhWu44OjCUQkNau91+9BSbA69S88KXc49
 aTJiCZlhPuGf4uGMWJJuPLcE2xO2QCZj+8ckL2STYrIip6GWlCH02kJaQmRkuWH2
 UhMOeJDBC4nvh4EQT/WwHpGzyhkavE2ayfo5YemxBJXo+P5Mdbf7WIDRQDLUEeQH
 F8sPoccH4hDiAorN/SkTsm14jVTP7oWW1M40Ont59Nhbgm88MsVkvjoneHnfBvbD
 HjK92soCWnYTAoREfj0G4xUxZgMdOZcezWrX0rx5LJ8Ju9y4zAi3cKGr7lg6hs4X
 syKfN0VjiDRtJ+pxayi3
 =yWfr
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes from Roland Dreier:
 - Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters
 - Add generic and mlx4 support for "raw" QPs: allow suitably privileged
   applications to send and receive arbitrary packets directly to/from
   the hardware
 - Add "doorbell drop" handling to the cxgb4 driver
 - A fairly large batch of qib hardware driver changes
 - A few fixes for lockdep-detected issues
 - A few other miscellaneous fixes and cleanups

Fix up trivial conflict in drivers/net/ethernet/emulex/benet/be.h.

* tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (53 commits)
  RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree
  IB/mlx4: Fix mlx4_ib_add() error flow
  IB/core: Fix IB_SA_COMP_MASK macro
  IB/iser: Fix error flow in iser ep connection establishment
  IB/mlx4: Increase the number of vectors (EQs) available for ULPs
  RDMA/cxgb4: Add query_qp support
  RDMA/cxgb4: Remove kfifo usage
  RDMA/cxgb4: Use vmalloc() for debugfs QP dump
  RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queues
  RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch()
  RDMA/cxgb4: Add DB Overflow Avoidance
  RDMA/cxgb4: Add debugfs RDMA memory stats
  cxgb4: DB Drop Recovery for RDMA and LLD queues
  cxgb4: Common platform specific changes for DB Drop Recovery
  cxgb4: Detect DB FULL events and notify RDMA ULD
  RDMA/cxgb4: Drop peer_abort when no endpoint found
  RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()
  mlx4_core: Change bitmap allocator to work in round-robin fashion
  RDMA/nes: Don't call event handler if pointer is NULL
  RDMA/nes: Fix for the ORD value of the connecting peer
  ...
2012-05-21 17:54:55 -07:00
Shlomo Pongratz b3416f4476 mlx4_core: Add second capabilities flags field
This patch adds a 64-bit flags2 features member to struct mlx4_dev to
export further features of the hardware.  The original flags field
tracks features whose support bits are advertised by the firmware in
offsets 0x40 and 0x44 of the query device capabilities command.
flags2 will track features whose support bits are scattered at various
offsets.

RSS support is the first feature to be exported through flags2.  RSS
capabilities are located at offset 0x2e.  The size of the RSS
indirection table is also given in this offset.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08 11:54:32 -07:00
Amir Vadai e5395e92a4 net/mlx4_core: set port QoS attributes
Adding QoS firmware commands:
- mlx4_en_SET_PORT_PRIO2TC - set UP <=> TC
- mlx4_en_SET_PORT_SCHEDULER - set promised BW, max BW and PG number

Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05 05:08:03 -04:00
Linus Torvalds 0c2fe82a9b InfiniBand/RDMA changes for the 3.4 merge window. Nothing big really
stands out; by patch count lots of fixes to the mlx4 driver plus some
 cleanups and fixes to the core and other drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJPZ2THAAoJEENa44ZhAt0hMgkP/AwXjwzz6lYlIizytQ5KOH11
 CT/VoHLIGIwY31aRhZRHggWLEbJi8akgfh04K9PiSh/muFRPYk5KJDoQEoJV5Odv
 12krqtpZeL41YcAPq0wiyP3Ki5AZDCDumzWbOtmxE9m93mVfi3yFTTWDHFo/7SOx
 A2kUITdKuZhgBpCFYS23Gs8QTWcMPUlwNlM76edG90BjSySHsK15tbqTUaEOC6Ux
 SPG0p0c2YjlZCPmRObrCL65o5LFRVajinZ4rXN7rre4LEU+IuXgW+mQU2Kwy8z6a
 oMPE2l4OMSqj270r2PlVK087gGH69nKfLgLQLJiP0Id+KwdYUk7vQcA+Fu0jwjP3
 Ci/ahllvB76IiaNbax0vTy2ohCJmilLLotAP46NW0vPR2/KnmVy0Mqk8pXQQddw4
 tnAFNnafn/MjTty8GwqyXR/enJZs29ePcSxcYnKjXYRIgG4ldejL2wktgSra8+gb
 3/qFag1HRgZzcICkXGpHj7uWJ2KDe++1m6KTb0THUmrjuiel6ATFZpYoeRed3GfS
 ZMqpjZvuXM8nA9CrKMkzm5vIiUFF8Qq0hUTLR38F8FiNEhmC08JqH5PqjJ3Z18if
 R1yG4W4xmp/0ICHg4zyg6LWV3YsweDD+jSCJpW+KNBvu3HtYb41HIlK+i2TTmtPD
 3etEZZRwROAyYKcwN01p
 =DbLx
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier:
 "Nothing big really stands out; by patch count lots of fixes to the
  mlx4 driver plus some cleanups and fixes to the core and other
  drivers."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits)
  mlx4_core: Scale size of MTT table with system RAM
  mlx4_core: Allow dynamic MTU configuration for IB ports
  IB/mlx4: Fix info returned when querying IBoE ports
  IB/mlx4: Fix possible missed completion event
  mlx4_core: Report thermal error events
  mlx4_core: Fix one more static exported function
  IB: Change CQE "csum_ok" field to a bit flag
  RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state
  RDMA/cxgb3: Don't pass irq flags to flush_qp()
  mlx4_core: Get rid of redundant ext_port_cap flags
  RDMA/ucma: Fix AB-BA deadlock
  IB/ehca: Fix ilog2() compile failure
  IB: Use central enum for speed instead of hard-coded values
  IB/iser: Post initial receive buffers before sending the final login request
  IB/iser: Free IB connection resources in the proper place
  IB/srp: Consolidate repetitive sysfs code
  IB/srp: Use pr_fmt() and pr_err()/pr_warn()
  IB/core: Fix SDR rates in sysfs
  mlx4: Enforce device max FMR maps in FMR alloc
  IB/mlx4: Set bad_wr for invalid send opcode
  ...
2012-03-21 10:33:42 -07:00
Roland Dreier 42872c7a5e Merge branches 'misc' and 'mlx4' into for-next
Conflicts:
	drivers/infiniband/hw/mlx4/main.c
	drivers/net/ethernet/mellanox/mlx4/main.c
	include/linux/mlx4/device.h
2012-03-12 16:25:28 -07:00
Or Gerlitz 096335b3f9 mlx4_core: Allow dynamic MTU configuration for IB ports
Set the MTU for IB ports in the driver instead of using the firmware
default of 2KB (the driver defaults to 4KB).  Allow for dynamic mtu
configuration through a new, per-port sysfs entry.

Since there's a dependency between the port MTU and the max number of
HW VLs the port can support, apply a mim/max approach, using a loop
that goes down from the highest possible number of VLs to the lowest,
using the firmware return status to know whether the requested number
of VLs is possible with a given MTU.

For now, as with the dynamic link type change / VPI support, the sysfs
entry to change the mtu is exposed only when NOT running in SR-IOV
mode.  To allow changing the MTU for the master in SR-IOV mode,
primary-function-initiated FLR (Function Level Reset) needs to be
implemented.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-12 16:24:59 -07:00
Jack Morgenstein 5984be9004 mlx4_core: Report thermal error events
Print an error message when a thermal error async event is reported by the HW.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Dotan Barak <dotanb@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-12 16:24:59 -07:00
Or Gerlitz 8154c07fe1 mlx4_core: Get rid of redundant ext_port_cap flags
While doing the work for commit a6f7feae6d ("IB/mlx4: pass SMP
vendor-specific attribute MADs to firmware") we realized that the
firmware would respond on all sorts of vendor-specific MADs.
Therefore commit 97285b7817 ("mlx4_core: Add extended port
capabilities support") adds redundant code into the driver, since
there's no real reaon to maintain the extended capabilities of the
port, as they can be queried on demand (e.g the FDR10 capability).

This patch reverts commit 97285b7817 and removes the check for
extended caps from the mlx4_ib driver port query flow.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-06 17:25:18 -08:00
Yevgeny Petrilin 9a9a232a92 net/mlx4: fixing sparse warnings for not declared, functions
The SET_PORT functions are implemented in port.c, which is part
of mlx4_core, these functions are exported. The functions are in use by
the mlx4_en module (were originally part of mlx4_en).
Their declaration remained in mlx4_en module, moving the declaration to the right location.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06 15:19:18 -05:00
Eli Cohen a5bbe892da mlx4: Enforce device max FMR maps in FMR alloc
ConnectX devices have a limit on the number of mappings that can be
done on an FMR before having to call sync_tpt.  The current
mlx4_ib driver reports the limit correctly in max_map_per_fmr in
.query_device(), but mlx4_core doesn't check it when actually
allocating FMRs.

Add a max_fmr_maps field to struct mlx4_caps and enforce this maximum
value on FMR allocations.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-26 01:43:37 -08:00
Eugenia Emantayev 93ece0c1a7 mlx4_en: eth statistics modification
In native mode display all available staticstics.
In SRIOV mode on VF display only SW counters statistics,
in SRIOV mode on hypervisor display SW counters and errors (got from FW)
statistics.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22 15:08:43 -05:00
Yevgeny Petrilin 8d0fc7b611 mlx4_core: Changing link sensing logic
New FW can give clues to driver regarding default port type
and whether or not we should default to link sensing on the port.

2 bits are added to QUERY_PORT command:
1. suggested_type: This bit gives a hint whether the default port type should be
   IB or Ethernet.
   The driver will use this hint in case the user didn't specify explicitly the link layer
   type he wants to set.
2. default_sense: If this bit is set, we would sense the port type on start-up
   and default the port to link sensing

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 14:57:07 -05:00
Yevgeny Petrilin 58a60168d1 mlx4: capability for link sensing
For ConnectX3 devices, we allow link sensing only if FW explicitly
reported it supports the feature.
For older versions (ConnectX1 and 2), if the card supports both link layer types
(Ethenet and Infiniband), link sensing is supported.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 14:57:06 -05:00
Jack Morgenstein ab9c17a009 mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet
1. Added module parameters sr_iov and probe_vf for controlling enablement of
   SRIOV mode.
2. Increased default max num-qps, num-mpts and log_num_macs to accomodate
   SRIOV mode
3. Added port_type_array as a module parameter to allow driver startup with
   ports configured as desired.
   In SRIOV mode, only ETH is supported, and this array is ignored; otherwise,
   for the case where the FW supports both port types (ETH and IB), the
   port_type_array parameter is used.
   By default, the port_type_array is set to configure both ports as IB.
4. When running in sriov mode, the master needs to initialize the ICM eq table
   to hold the eq's for itself and also for all the slaves.
5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap.
6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures
   mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow
   modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca).
   VFs obtain their startup information from the PF (master) device via the
   comm channel.
7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver
   aborts loading the device.
8. Do not allow setting port type via sysfs when running in SRIOV mode.
9. mlx4_get_ownership:  Currently, only one PF is supported by the driver.
   If the HCA is burned with FW which enables more than one PF, only one
   of the PFs is allowed to run.  The first one up grabs a FW ownership
   semaphone -- all other PFs will find that semaphore taken, and the
   driver will not allow them to run.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Liran Liss <liranl@mellanox.co.il>
Signed-off-by: Marcel Apfelbaum <marcela@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:08 -05:00
Marcel Apfelbaum 2b8fb2867c mlx4_core: mtts resources units changed to offset
In the previous implementation mtts are managed by:
1. order     - log(mtt segments), 'mtt segment' groups several mtts together.
2. first_seg - segment location relative to mtt table.
In the current implementation:
1. order     - log(mtts) rather than segments
2. offset    - mtt index in mtt table

Note: The actual mtt allocation is made in segments but it is
      transparent to callers.

Rational: The mtt resource holders are not interested on how the allocation
          of mtt is done, but rather on how they will use it.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:07 -05:00
Eugenia Emantayev ffe455ad04 mlx4: Ethernet port management modifications
The physical port is now common to the PF and VFs.
The port resources and configuration is managed by the PF, VFs can
only influence the MTU of the port, it is set as max among all functions,
Each function allocates RX buffers of required size to meet it's MTU enforcement.
Port management code was moved to mlx4_core, as the mlx4_en module is
virtualization unaware

Move handling qp functionality to mlx4_get_eth_qp/mlx4_put_eth_qp
including reserve/release range and add/release unicast steering.
Let mlx4_register/unregister_mac deal only with MAC (un)registration.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:07 -05:00
Jack Morgenstein f5311ac109 mlx4_core: Reduce number of PD bits to 17
When SRIOV is enabled on the chip (at FW burning time),
the HCA uses only 17 bits for the PD. The remaining 7 high-order bits
are ignored.

Change the allocator to return only 17 bits for the PD.  The MSB 7
bits will be used to encode the slave number for consistency
checking later on in the resource tracker.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:05 -05:00
Jack Morgenstein 65dab25deb mlx4: Extanding port_mask functionality
Port mask now has additional state.
Port can be set as "none". In this case neither the mlx4_en or mlx4_ib
drivers take ownership of the port.
In multifunction mode there is an option to set the vfs as single ported devices.
(in single function mode, both physical ports belong to same function)

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:05 -05:00
Jack Morgenstein 623ed84b1f mlx4_core: initial header-file changes for SRIOV support
These changes will not affect module operation as yet. They
are only to get some structs and enums in place for use by
subsequent patches (making those smaller).

Added here:
* sriov state structs and inlines (mlx4_is_master/slave/mfunc)
* comm-channel and vhcr support structures
* enum values for new FW and comm-channel virtual commands
  (i.e., commands, passed via the comm channel to the PF-driver).
* prototypes for many command wrapper functions (used by the
  PF context for processing FW commands passed to it by the VFs).
* struct mlx4_eqe is moved from eq.c to mlx4.h (it will be used
  by other mlx4_core source files).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13 13:56:05 -05:00
Oren Duer 559a9f1d35 net/mlx4_en: fix WOL handlers were always looking at port2 capability bit
There are 2 capability bits for WOL, one for each port.
WOL handlers were looking only on the second bit, regardless of the port.

Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-27 17:17:04 -05:00
Linus Torvalds f470f8d4e7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits)
  mlx4_core: Deprecate log_num_vlan module param
  IB/mlx4: Don't set VLAN in IBoE WQEs' control segment
  IB/mlx4: Enable 4K mtu for IBoE
  RDMA/cxgb4: Mark QP in error before disabling the queue in firmware
  RDMA/cxgb4: Serialize calls to CQ's comp_handler
  RDMA/cxgb3: Serialize calls to CQ's comp_handler
  IB/qib: Fix issue with link states and QSFP cables
  IB/mlx4: Configure extended active speeds
  mlx4_core: Add extended port capabilities support
  IB/qib: Hold links until tuning data is available
  IB/qib: Clean up checkpatch issue
  IB/qib: Remove s_lock around header validation
  IB/qib: Precompute timeout jiffies to optimize latency
  IB/qib: Use RCU for qpn lookup
  IB/qib: Eliminate divide/mod in converting idx to egr buf pointer
  IB/qib: Decode path MTU optimization
  IB/qib: Optimize RC/UC code by IB operation
  IPoIB: Use the right function to do DMA unmap pages
  RDMA/cxgb4: Use correct QID in insert_recv_cqe()
  RDMA/cxgb4: Make sure flush CQ entries are collected on connection close
  ...
2011-11-01 10:51:38 -07:00
Roland Dreier 504255f8d0 Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', 'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next 2011-11-01 09:37:08 -07:00
Marcel Apfelbaum 97285b7817 mlx4_core: Add extended port capabilities support
An Extended Port Info packet is sent to each hw port during HCA init.
If it returns without error, we assume the port supports extended port
capabilities.

Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-28 11:33:38 -07:00
Yevgeny Petrilin f3a9d1f25d mlx4_en: Controlling FCS header removal
Canceling FCS removal where FW allows for better alignment
of incoming data.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 03:42:26 -04:00
Sean Hefty 18abd5ea57 IB/mlx4: Add support for XRC SRQs
Allow the user to create XRC SRQs.  This patch is based on a patch
from Jack Morgenstrein <jackm@dev.mellanox.co.il>.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13 09:43:46 -07:00
Sean Hefty 012a8ff577 IB/mlx4: Add support for XRC domains
Support creating and destroying XRC domains.  Any sharing of the XRCD
is managed above the low-level driver.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13 09:43:03 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Or Gerlitz f2a3f6a32c mlx4_core: Add network flow counters
ConnectX devices support a set of flow counters that can be attached
to a set containing one or more QPs.  Each such counter tracks receive
and transmit packets and bytes of these QPs.  This patch queries the
device to check support for counters, handles initialization of the
HCA to enable counters, and initializes a bitmap allocator to control
counter allocations.  Derived from patch by Eli Cohen <eli@mellanox.co.il>.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18 21:04:34 -07:00
Or Gerlitz ccf8632196 mlx4_core: Read extended capabilities into the flags field
Query another dword containing up to 32 extended device capabilities
and merge it into struct mlx4_caps.flags.  Update the code that
handles the current extended device capabilities (e.g UDP RSS, WoL,
vep steering, etc) to use the extended device cap flags field instead
of a field per extended capability.  Initial patch done by Eli Cohen
<eli@mellanox.co.il>.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18 21:04:32 -07:00
Or Gerlitz 52eafc68d6 mlx4_core: Extend capability flags to 64 bits
The latest firmware adds a second dword containing more device flags,
so extend the device capabilities flags field from 32 to 64 bits.
Derived from patch by Eli Cohen <eli@mellanox.co.il>

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-18 21:04:32 -07:00
Eli Cohen c1b43dca13 mlx4: Add blue flame support for kernel consumers
Using blue flame can improve latency by allowing the HW to more efficiently
access the WQE. This patch presents two functions that are used to allocate or
release HW resources for using blue flame; the caller need to supply a struct
mlx4_bf object when allocating resources. Consumers that make use of this API
should post doorbells to the UAR object pointed by the initialized struct
mlx4_bf;

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:23 -07:00
Yevgeny Petrilin 1679200f91 mlx4_en: Enabling new steering
The mlx4_en module now uses the new steering mechanism.
The RX packets are now steered through the MCG table instead
of Mac table for unicast, and default entry for multicast.
The feature is enabled through INIT_HCA

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:22 -07:00
Yevgeny Petrilin 0345584e0b mlx4: generalization of multicast steering.
The same packet steering mechanism would be used both for IB and Ethernet,
Both multicasts and unicasts.
This commit prepares the general infrastructure for this.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:21 -07:00
Yevgeny Petrilin 725c89997e mlx4_en: Reporting HW revision in ethtool -i
HW revision is derived from device ID and rev id.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:20 -07:00
Yevgeny Petrilin 14c07b1358 mlx4: Wake on LAN support
The driver queries the FW for WOL support.
Ethtool get/set_wol is implemented accordingly.
Only magic packets are supported at the time.

Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:19 -07:00
Yevgeny Petrilin 0b7ca5a928 mlx4: Changing interrupt scheme
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core
customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the
interrupt vectors. Those vectors are not opened at mlx4 device initialization,
opened by demand.
Changed the max number of possible EQs according to the new scheme, no longer relies on
on number of cores.
The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq().
Customers that do not use the new API will get completion vectors as before.

Signed-off-by: Markuze Alex <markuze@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:18 -07:00
Aleksey Senin da995a8aee IB/mlx4: Handle protocol field in multicast table
The newest device firmware stores IB vs. Ethernet protocol in two bits
in members_count field of multicast group table (0: Infiniband, 1:
Ethernet).  When changing the QP members count for a multicast group,
it important not to reset this information.  When calling multicast
attach first time, the protocol type should be specified.  In this
patch we always set it IB, but in the future we will handle Ethernet
too.  When looking for a QP, the protocol type shoud be checked too.

Signed-off-by: Aleksey Senin <alekseys@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 14:49:17 -08:00
Linus Torvalds 9e5fca251f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
  IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
  IB/qib: Allow driver to load if PCIe AER fails
  IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
  IB/qib: Fix extra log level in qib_early_err()
  RDMA/cxgb4: Remove unnecessary KERN_<level> use
  RDMA/cxgb3: Remove unnecessary KERN_<level> use
  IB/core: Add link layer type information to sysfs
  IB/mlx4: Add VLAN support for IBoE
  IB/core: Add VLAN support for IBoE
  IB/mlx4: Add support for IBoE
  mlx4_en: Change multicast promiscuous mode to support IBoE
  mlx4_core: Update data structures and constants for IBoE
  mlx4_core: Allow protocol drivers to find corresponding interfaces
  IB/uverbs: Return link layer type to userspace for query port operation
  IB/srp: Sync buffer before posting send
  IB/srp: Use list_first_entry()
  IB/srp: Reduce number of BUSY conditions
  IB/srp: Eliminate two forward declarations
  IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
  IB: Replace EXTRA_CFLAGS with ccflags-y
  ...
2010-10-26 17:54:22 -07:00
Roland Dreier 116e9535fe Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', 'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next 2010-10-26 16:09:11 -07:00
Eli Cohen 4c3eb3ca13 IB/mlx4: Add VLAN support for IBoE
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged
VLAN frames.  The VLAN tag is encoded in the GID and derived from it
by a simple computation.

The netdev notifier callback is modified to catch VLAN device
addition/removal and the port's GID table is updated to reflect the
change, so that for each netdevice there is an entry in the GID table.
When the port's GID table is exhausted, GID entries will not be added.
Only children of the main interfaces can add to the GID table; if a
VLAN interface is added on another VLAN interface (e.g. "vconfig add
eth2.6 8"), then that interfaces will not add an entry to the GID
table.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen fa417f7b52 IB/mlx4: Add support for IBoE
Add support for IBoE to mlx4_ib.  The bulk of the code is handling the
new address vector fields; mlx4 needs the MAC address of a remote node
to include it in a WQE (for datagrams) or in the QP context (for
connected QPs).  Address resolution is done by assuming all unicast
GIDs are either link-local IPv6 addresses.

Multicast group attach/detach needs to update the NIC's multicast
filters; but since attaching a QP to a multicast group can be done
before the QP is bound to a port, for IBoE we need to keep track of
all multicast groups that a QP is attached too before it transitions
from INIT to RTR (since it does not have a port in the INIT state).

Signed-off-by: Eli Cohen <eli@mellanox.co.il>

[ Many things cleaned up and otherwise monkeyed with; hope I didn't
  introduce too many bugs.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen 96dfa684c8 mlx4_core: Update data structures and constants for IBoE
Add fields to hardware data structures and add new constants required for IBoE
support.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen 5a0fd09428 IB/mlx4: Limit size of fast registration WRs
Fix the limit on the size of max fast registration WRs that can be
posted to match hardware capabilities.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-11 14:33:17 -07:00
Yevgeny Petrilin 0533943c5c mlx4_en: UDP RSS support
Adding capability for RSS for UDP traffic, hashing is done based on
IP addresses and UDP port number.
The support depends on HW/FW capabilities.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:57:09 -07:00