[ Upstream commit 792bc998baf9ae17297b1f93b1edc3ca34a0b7e2 ]
evlist__config() might mess up the debug output consumed by test
"Test per-thread recording" in "Miscellaneous Intel PT testing".
Move it out from between the debug prints:
"perf record opening and mmapping events" and
"perf record done opening and mmapping events"
Fixes: da4062021e ("perf tools: Add debug messages and comments for testing")
Closes: https://lore.kernel.org/linux-perf-users/ZhVfc5jYLarnGzKa@x1/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240411075447.17306-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1285ab300d598ead593b190af65a16f4b0843c68 ]
User space tasks can migrate between CPUs, so when tracing selected CPUs,
sideband for all CPUs is needed. In this case set the cpu map of the evsel
to all online CPUs. This may modify the original cpu map of the evlist.
Therefore, need to check whether the preceding scenario exists before
record__init_thread_masks().
Dummy tracking has been set in record__open(), move it before
record__init_thread_masks() and add a helper for unified processing.
The sys_perf_event_open invoked is as follows:
# perf --debug verbose=3 record -e cpu-clock -D 100 true
<SNIP>
Opening: cpu-clock
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 13
Opening: dummy:u
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 20
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 21
<SNIP>
'perf test' needs to update base-record & system-wide-dummy attr expected values
for test-record-C0:
1. Because a dummy sideband event is added to the sampling of specified
CPUs. When evlist contains evsel of different sample_type,
evlist__config() will change the default PERF_SAMPLE_ID bit to
PERF_SAMPLE_IDENTIFICATION bit.
The attr sample_type expected value of base-record and system-wide-dummy
in test-record-C0 needs to be updated.
2. The perf record uses evlist__add_aux_dummy() instead of
evlist__add_dummy() to add a dummy event.
The expected value of system-wide-dummy attr needs to be updated.
The 'perf test' result is as follows:
# ./perf test list 2>&1 | grep 'Setup struct perf_event_attr'
17: Setup struct perf_event_attr
# ./perf test 17
17: Setup struct perf_event_attr : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 792bc998baf9 ("perf record: Fix debug message placement for test consumption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c95e4ef065723496442898614d09a9a916eab81 ]
Currently, intel-bts, intel-pt, and arm-spe may add tracking event to the
evlist. We may need to search for the tracking event for some settings.
Therefore, add evlist__findnew_tracking_event() helper.
If system_wide is true, evlist__findnew_tracking_event() set the cpu map
of the evsel to all online CPUs.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 792bc998baf9 ("perf record: Fix debug message placement for test consumption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a27fc01700fbff2f205000edf0d1d315b5f85cc ]
Commit 5b7ba82a75 ("perf symbols: Load kernel maps before using")
changed it so that loading a kernel DSO would cause the symbols for the
DSO to be eagerly loaded.
For 'perf record' this is overhead as the symbols won't be used. Add a
field to 'struct symbol_conf' to control the behavior and disable it for
'perf record' and 'perf inject'.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231102175735.2272696-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: aaf494cf483a ("perf annotate: Fix annotation_calc_lines() to pass correct address to get_srcline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88ce0106a1f603bf360cb397e8fe293f8298fabb ]
The session has a header in it which contains a perf env with
bpf_progs. The bpf_progs are accessed by the sideband thread and so
the sideband thread must be stopped before the session is deleted, to
avoid a use after free. This error was detected by AddressSanitizer
in the following:
==2054673==ERROR: AddressSanitizer: heap-use-after-free on address 0x61d000161e00 at pc 0x55769289de54 bp 0x7f9df36d4ab0 sp 0x7f9df36d4aa8
READ of size 8 at 0x61d000161e00 thread T1
#0 0x55769289de53 in __perf_env__insert_bpf_prog_info util/env.c:42
#1 0x55769289dbb1 in perf_env__insert_bpf_prog_info util/env.c:29
#2 0x557692bbae29 in perf_env__add_bpf_info util/bpf-event.c:483
#3 0x557692bbb01a in bpf_event__sb_cb util/bpf-event.c:512
#4 0x5576928b75f4 in perf_evlist__poll_thread util/sideband_evlist.c:68
#5 0x7f9df96a63eb in start_thread nptl/pthread_create.c:444
#6 0x7f9df9726a4b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
0x61d000161e00 is located 384 bytes inside of 2136-byte region [0x61d000161c80,0x61d0001624d8)
freed by thread T0 here:
#0 0x7f9dfa6d7288 in __interceptor_free libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x557692978d50 in perf_session__delete util/session.c:319
#2 0x557692673959 in __cmd_record tools/perf/builtin-record.c:2884
#3 0x55769267a9f0 in cmd_record tools/perf/builtin-record.c:4259
#4 0x55769286710c in run_builtin tools/perf/perf.c:349
#5 0x557692867678 in handle_internal_command tools/perf/perf.c:402
#6 0x557692867a40 in run_argv tools/perf/perf.c:446
#7 0x557692867fae in main tools/perf/perf.c:562
#8 0x7f9df96456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Fixes: 657ee55319 ("perf evlist: Introduce side band thread")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02f9b50e04812782fd006ed21c6da1c5e3e373da ]
In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.
Before:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Dump -.2024011812110182 ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2176784359
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ......................................
#
97.83% perf perf [.] noploop
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
After:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
WARNING: --timestamp-filename option is not available in pipe mode.
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2185575421
#
# Overhead Command Shared Object Symbol
# ........ ....... ..................... .............................................
#
97.75% perf perf [.] noploop
#
# (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
#
Fixes: ecfd7a9c04 ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a61f89bf76ef6f87ec48dd90dbc73a6cf9952edc ]
It's hard to distinguish the default cycles events among hybrid PMUs.
For example,
$ perf top
Available samples
385 cycles:P
903 cycles:P
The other tool, e.g., perf record, uniforms the event name and adds the
hybrid PMU name before opening the event. So the events can be easily
distinguished. Apply the same methodology for the perf top as well.
The evlist__uniquify_name() will be invoked by both record and top.
Move it to util/evlist.c
With the patch:
$ perf top
Available samples
148 cpu_atom/cycles:P/
1K cpu_core/cycles:P/
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hector Martin <marcan@marcan.st>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231214144612.1092028-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 02f9b50e0481 ("perf record: Check conflict between '--timestamp-filename' option and pipe mode before recording")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff10a165201f6f60cff225083ce301ad3f5d8f1 ]
perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.
Fixes: 03724b2e9c ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF
map") and commit 14e4b9f428 ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") the BPF event support hasn't been well
maintained and it adds considerable complexity in areas like event
parsing, not least as '/' is a separator for event modifiers as well as
in paths.
This patch removes support in the event parser for BPF events and then
the associated functions are removed. This leads to the removal of whole
source files like bpf-loader.c. Removing support means that augmented
syscalls in perf trace is broken, this will be fixed in a later commit
adding support using BPF skeletons.
The removal of BPF events causes an unused label warning from flex
generated code, so update build to ignore it:
```
util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label]
2704 | find_rule: /* we branch to this label when backing up */
```
Committer notes:
Extracted from a larger patch that was also removing the support for
linking with libllvm and libclang, that were an alternative to using an
external clang execution to compile the .c event source code into BPF
bytecode.
Testing it:
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'home'
Initial error:
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Cannot find PMU `home'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230810184853.2860737-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_pmus__has_hybrid was used to detect when there was >1 core PMU,
this can be achieved with perf_pmus__num_core_pmus that doesn't depend
upon is_pmu_hybrid and PMU name comparisons. When modifying the
function calls take the opportunity to improve comments,
enable/simplify tests that were previously failing for hybrid but now
pass and to simplify generic code.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-34-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate and hide the pmus list in pmus.[ch]. Move pmus functionality
out of pmu.[ch] into pmus.[ch] renaming pmus functions which were
prefixed perf_pmu__ to perf_pmus__.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-28-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than iterate hybrid PMUs, inhererently Intel specific, iterate
all PMUs checking whether they are core. To only get hybrid cores,
first call perf_pmu__has_hybrid.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function is only used in printout, reduce scope to
stat-display.c. Remove the now empty evlist-hybrid.c and
evlist-hybrid.h.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__evlist__add_default adds a cycles event to a typically empty evlist
and was extended for hybrid with evlist__add_default_hybrid, as more
than 1 PMU was necessary. Rather than have dedicated logic for the
cycles event, this change switches to parsing 'cycles:P' which will
handle wildcarding the PMUs appropriately for hybrid.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit 1d3351e631 ("perf tools: Enable on a list of CPUs for hybrid")
perf on hybrid will warn if a user requested CPU doesn't match the PMU
of the given event but only for hybrid PMUs. Make the logic generic
for all PMUs and remove the hybrid logic.
Warn if a CPU is requested that isn't present/offline for events not
on the core. Warn if a CPU is requested for a core PMU, but the CPU
isn't within the cpu map of that PMU.
For example on a 16 (0-15) CPU system:
```
$ perf stat -e imc_free_running/data_read/,cycles -C 16 true
WARNING: A requested CPU in '16' is not supported by PMU 'uncore_imc_free_running_1' (CPUs 0-15) for event 'imc_free_running/data_read/'
WARNING: A requested CPU in '16' is not supported by PMU 'uncore_imc_free_running_0' (CPUs 0-15) for event 'imc_free_running/data_read/'
WARNING: A requested CPU in '16' is not supported by PMU 'cpu' (CPUs 0-15) for event 'cycles'
Performance counter stats for 'CPU(s) 16':
<not supported> MiB imc_free_running/data_read/
<not supported> cycles
0.000575312 seconds time elapsed
```
Remove evlist__fix_hybrid_cpus that previously produced the warnings
and also perf_pmu__cpus_match that worked with evlist__fix_hybrid_cpus
to change CPU maps for hybrid CPUs, something that is no longer
necessary as CPU map propagation properly intersects user requested
CPUs with the core PMU's CPU map.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously this was used to modify CPU map propagation, but it is now
unnecessary as map propagation ensure core PMUs only have valid PMUs
in the CPU map from user requested CPUs.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support the cputype argument added to "perf stat" for hybrid it is
necessary to filter events during wildcard matching. Add a scanner
argument for the filter and checking it when wildcard matching.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-30-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit a980755beb.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a BPF filter to work properly, users need to provide appropriate
options to enable the sample types. Otherwise the BPF program would
see an invalid value (i.e. always 0) and filter won't work well.
Show a warning message if sample types are missing like below.
$ sudo ./perf record -e cycles --filter 'addr < 100' true
Error: cycles event does not have PERF_SAMPLE_ADDR
Hint: please add -d option to perf record.
failed to set filter "BPF" on event cycles with 22 (Invalid argument)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it uses bpf filters, event might drop some samples. It'd be nice
if it can report how many samples it lost. As LOST_SAMPLES event can
carry the similar information, let's use it for bpf filters.
To indicate it's from BPF filters, add a new misc flag for that and
do not display cpu load warnings.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BPF skeleton support is now key to a number of perf features. Rather
than making it so that BPF support must be enabled for the build, make
this the default and error if the build lacks a clang and libbpf that
are sufficient. To avoid the error and build without BPF skeletons the
NO_BPF_SKEL=1 flag can be used. Add a build-options flag to 'perf
version' to enable detection of the BPF skeleton support and use this
in the offcpu shell test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Maintaining the number of groups during event parsing is problematic
and since changing to sort/regroup events can only be computed by a
linear pass over the evlist. As the value is generally only used in
tests, rather than hold it in a variable compute it by passing over
the evlist when necessary.
This change highlights that libpfm's counting of groups with a single
entry disagreed with regular event parsing. The libpfm tests are
updated accordingly.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230312021543.3060328-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This just simply replace record_opts::initial_delay with
target::initial_delay. Nothing else is changed.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-3-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hundreds of "read LOST count failed" error messages may be displayed,
when the below command is launched.
perf record -e '{cpu/mem-loads-aux/,cpu/event=0xcd,umask=0x1/}:S' -a
According to the commit 89e3106fa2 ("libperf: Handle read format
in perf_evsel__read()"), the PERF_FORMAT_GROUP is only available for
the leader. However, the record__read_lost_samples() goes through every
entry of an evlist, which includes both leader and member. The member
event errors out and triggers the error message. Since there may be
hundreds of CPUs on a server, the message will be printed hundreds of
times, which is very annoying.
The message itself is correct, but the pr_err is a overkill. Other error
messages in the record__read_lost_samples() are all pr_debug. To make
the output format consistent, change the pr_err("read LOST count
failed\n"); to pr_debug("read LOST count failed\n");.
User can still get the message via -v option.
Fixes: e3a23261ad ("perf record: Read and inject LOST_SAMPLES events")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230301150413.27011-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:
# perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
[ perf record: Woken up 1 times to write data ]
perf: Segmentation fault
Obtained 12 stack frames.
./perf/perf(+0x197673) [0x55f99710b673]
/lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
./perf/perf(+0x8eb40) [0x55f997002b40]
./perf/perf(+0x1f6882) [0x55f99716a882]
./perf/perf(+0x794c2) [0x55f996fed4c2]
./perf/perf(+0x7b7c7) [0x55f996fef7c7]
./perf/perf(+0x9074b) [0x55f99700474b]
./perf/perf(+0x12e23c) [0x55f9970a223c]
./perf/perf(+0x12e54a) [0x55f9970a254a]
./perf/perf(+0x7db60) [0x55f996ff1b60]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
Segmentation fault (core dumped)
backtrace of the core file is as follows:
(gdb) bt
#0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
#1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
#2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
#3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
#4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
from=from@entry=0) at util/synthetic-events.c:1895
#5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
at util/synthetic-events.c:1905
#6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
#7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
#8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
#9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
#10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
#11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
#12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562
The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
__cmd_record
-> record__free_thread_data
-> zfree(&rec->thread_data) // free rec->thread_data
-> record__synthesize
-> perf_event__synthesize_id_index
-> process_synthesized_event
-> record__write
-> record__bytes_written // access rec->thread_data
We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.
Fixes: 6d57581659 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data type of the verbose variable is integer and can be negative,
replace improperly used cases in a unified manner:
1. if (verbose) => if (verbose > 0)
2. if (!verbose) => if (verbose <= 0)
3. if (XX && verbose) => if (XX && verbose > 0)
4. if (XX && !verbose) => if (XX && verbose <= 0)
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20221220035702.188413-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The group option predates grouping events using curly braces added in
commit 89efb02950 ("perf tools: Add support to parse event group
syntax").
The --group option was retained for legacy support (in August
2012) but keeping it adds complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Shaomin Deng <dengshaomin@cdjrlc.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Timothy Hayes <timothy.hayes@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221213232651.1269909-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the dedicated non-atomic helpers for {clear,set}_bit() and their
test variants, i.e. the double-underscore versions. Depsite being
defined in atomic.h, and despite the kernel versions being atomic in the
kernel, tools' {clear,set}_bit() helpers aren't actually atomic. Move
to the double-underscore versions so that the versions that are expected
to be atomic (for kernel developers) can be made atomic without
affecting users that don't want atomic operations.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: alexandru elisei <alexandru.elisei@arm.com>
Cc: kvm@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: kvmarm@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20221119013450.2643007-6-seanjc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This removes undefined behavior as described in:
https://wiki.sei.cmu.edu/confluence/display/c/SIG31-C.+Do+not+access+shared+objects+in+signal+handlers
Suggested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024181913.630986-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the global quiet variable everywhere so that all tools hide warnings
in quiet mode and update the documentation to reflect this.
'perf probe' claimed that errors are not printed in quiet mode but I
don't see this so remove it from the docs.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The write call may set errno which is problematic if occurring in a
function also setting errno. Save and restore errno around the write
call.
done_fd may be used after close, clear it as part of the close and check
its validity in the signal handler.
Suggested-by: <gthelen@google.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20221024011024.462518-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add debug messages to enable scripts to track aspects of 'perf record'
behaviour. The messages will be consumed after 'perf record' has run,
with the exception of "perf record has started" which is consequently
flushed.
Put comments so developers know which messages are also being used by test
scripts.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220912083412.7058-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it fails to open events record__open() returns without setting the
session->evlist. Then it gets a segfault in the function trying to read
lost sample counts. You can easily reproduce it as a normal user like:
$ perf record -p 1 true
...
perf: Segmentation fault
...
Skip the function if it has no evlist. And add more protection for evsels
which are not properly initialized.
Fixes: a49aa8a54e861af1 ("perf record: Read and inject LOST_SAMPLES events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220909235024.278281-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there are lost samples, it can read the number of PERF_FORMAT_LOST and
convert it to PERF_RECORD_LOST_SAMPLES and write to the data file at the end.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901195739.668604-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
AUX area traces can produce too much data to record successfully or
analyze subsequently. Add another means to reduce data collection by
allowing multiple recording time ranges.
This is useful, for instance, in cases where a workload produces
predictably reproducible events in specific time ranges.
Today we only have perf record -D <msecs> to start at a specific region, or
some complicated approach using snapshot mode and external scripts sending
signals or using the fifos. But these approaches are difficult to set up
compared with simply having perf do it.
Extend perf record option -D/--delay option to specifying relative time
stamps for start stop controlled by perf with the right time offset, for
instance:
perf record -e intel_pt// -D 10-20,30-40
to record 10ms to 20ms into the trace and 30ms to 40ms.
Example:
The example workload is:
$ cat repeat-usleep.c
int usleep(useconds_t usec);
int usage(int ret, const char *msg)
{
if (msg)
fprintf(stderr, "%s\n", msg);
fprintf(stderr, "Usage is: repeat-usleep <microseconds>\n");
return ret;
}
int main(int argc, char *argv[])
{
unsigned long usecs;
char *end_ptr;
if (argc != 2)
return usage(1, "Error: Wrong number of arguments!");
errno = 0;
usecs = strtoul(argv[1], &end_ptr, 0);
if (errno || *end_ptr || usecs > UINT_MAX)
return usage(1, "Error: Invalid argument!");
while (1) {
int ret = usleep(usecs);
if (ret & errno != EINTR)
return usage(1, "Error: usleep() failed!");
}
return 0;
}
$ perf record -e intel_pt//u --delay 10-20,40-70,110-160 -- ./repeat-usleep 500
Events disabled
Events enabled
Events disabled
Events enabled
Events disabled
Events enabled
Events disabled
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 0.204 MB perf.data ]
Terminated
A dlfilter is used to determine continuous data collection (timestamps
less than 1ms apart):
$ cat dlfilter-show-delays.c
static __u64 start_time;
static __u64 last_time;
int start(void **data, void *ctx)
{
printf("%-17s\t%-9s\t%-6s\n", " Time", " Duration", " Delay");
return 0;
}
int filter_event_early(void *data, const struct perf_dlfilter_sample *sample, void *ctx)
{
__u64 delta;
if (!sample->time)
return 1;
if (!last_time)
goto out;
delta = sample->time - last_time;
if (delta < 1000000)
goto out2;;
printf("%17.9f\t%9.1f\t%6.1f\n", start_time / 1000000000.0, (last_time - start_time) / 1000000.0, delta / 1000000.0);
out:
start_time = sample->time;
out2:
last_time = sample->time;
return 1;
}
int stop(void *data, void *ctx)
{
printf("%17.9f\t%9.1f\n", start_time / 1000000000.0, (last_time - start_time) / 1000000.0);
return 0;
}
The result shows the times roughly match the --delay option:
$ perf script --itrace=qb --dlfilter dlfilter-show-delays.so
Time Duration Delay
39215.302317300 9.7 20.5
39215.332480217 30.4 40.9
39215.403837717 49.8
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220824072814.16422-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Patch "perf record: Fix way of handling non-perf-event pollfds" added a
generic way to handle non-perf-event file descriptors like evlist->ctl_fd.
Use it instead of handling evlist->ctl_fd separately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220824072814.16422-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record __cmd_record() does not poll evlist pollfds. Instead it polls
thread_data[0].pollfd. That happens whether or not threads are being used.
perf record duplicates evlist mmap pollfds as needed for separate threads.
The non-perf-event represented by evlist->ctl_fd has to handled separately,
which is done explicitly, duplicating it into the thread_data[0] pollfds.
That approach neglects any other non-perf-event file descriptors. Currently
there is also done_fd which needs the same handling.
Add a new generalized approach.
Add fdarray_flag__non_perf_event to identify the file descriptors that
need the special handling. For those cases, also keep a mapping of the
evlist pollfd index and thread pollfd index, so that the evlist revents
can be updated.
Although this patch adds the new handling, it does not take it into use.
There is no functional change, but it is the precursor to a fix, so is
marked as a fix.
Fixes: 415ccb58f6 ("perf record: Introduce thread specific data array")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220824072814.16422-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value
-1 must be skipped when setting CPU mask bits.
Prior to commit cbd7bfc7fd ("tools/perf: Fix out of bound access
to cpu mask array") the invalid setting went unnoticed, but since then
it causes perf record to fail with an error.
Example:
Before:
$ perf record -e intel_pt// --per-thread uname
Failed to initialize parallel data streaming masks
After:
$ perf record -e intel_pt// --per-thread uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.068 MB perf.data ]
Fixes: ae4f8ae16a ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915122612.81738-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu mask init code in "record__mmap_cpu_mask_init" function access
"bits" array part of "struct mmap_cpu_mask". The size of this array is
the value from cpu__max_cpu().cpu. This array is used to contain the
cpumask value for each cpu. While setting bit for each cpu, it calls
"set_bit" function which access index in "bits" array.
If we provide a command line option to -C which is greater than the
number of CPU's present in the system, the set_bit could access an array
member which is out-of the array size. This is because currently, there
is no boundary check for the CPU. This will result in seg fault:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Segmentation fault (core dumped)
<<>>
Debugging with gdb, points to function flow as below:
<<>>
set_bit
record__mmap_cpu_mask_init
record__init_thread_default_masks
record__init_thread_masks
cmd_record
<<>>
Fix this by adding boundary check for the array.
After the patch:
<<>>
./perf record -C 12341234 ls
Perf can support 2048 CPUs. Consider raising MAX_NR_CPUS
Failed to initialize parallel data streaming masks
<<>>
With this fix, if -C is given a non-exsiting CPU, perf
record will fail with:
<<>>
./perf record -C 50 ls
Failed to initialize parallel data streaming masks
<<>>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220905141929.7171-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When one uses -p $not_existing_pid, the output of --help is printed:
$ perf record -p 123456789 2>&1 | head -n3
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
Let's change it something similar what perf top -p $not_existing_pid
prints:
$ ./perf top -p 123456789 --stdio
Error:
Couldn't create thread/CPU maps: No such process
Newly suggested error message:
$ ./perf record -p 123456789
Couldn't create thread/CPU maps: No such process
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/8e00eda1-4de0-2c44-ce67-d4df48ac1f7c@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for recording sideband events in a virtual machine guest so
that they can be injected into a host perf.data file.
This is needed to enable injecting events after the initial synthesized
user events (that have an all zero id sample) but before regular events.
Committer notes:
Add entry about PERF_RECORD_FINISHED_INIT to
tools/perf/Documentation/perf.data-file-format.txt.
Committer testing:
Before:
# perf report -D | grep FINISHED
0 0x5910 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
#
After:
# perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf report -D | grep FINISHED
0 0x5068 [0x8]: PERF_RECORD_FINISHED_INIT: unhandled!
0 0x5390 [0x8]: PERF_RECORD_FINISHED_ROUND
FINISHED_ROUND events: 1 ( 0.5%)
FINISHED_INIT events: 1 ( 0.5%)
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220610113316.6682-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for recording sideband events in a virtual machine guest so
that they can be injected into a host perf.data file.
Adjust the logic so that if there are IDs then the id index is recorded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220610113316.6682-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kcore provides a copy of the running kernel including any modified code.
A trace that benefits from that also benefits from text_poke events, so
enable them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220610113316.6682-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This covers two different use cases. The first one is cgroup
filtering given by -G/--cgroup option which controls the off-cpu
profiling for tasks in the given cgroups only.
The other use case is cgroup sampling which is enabled by
--all-cgroups option and it adds PERF_SAMPLE_CGROUP to the sample_type
to set the cgroup id of the task in the sample data.
Example output.
$ sudo perf record -a --off-cpu --all-cgroups sleep 1
$ sudo perf report --stdio -s comm,cgroup --call-graph=no
...
# Samples: 144 of event 'offcpu-time'
# Event count (approx.): 48452045427
#
# Children Self Command Cgroup
# ........ ........ ............... ..........................................
#
61.57% 5.60% Chrome_ChildIOT /user.slice/user-657345.slice/user@657345.service/app.slice/...
29.51% 7.38% Web Content /user.slice/user-657345.slice/user@657345.service/app.slice/...
17.48% 1.59% Chrome_IOThread /user.slice/user-657345.slice/user@657345.service/app.slice/...
16.48% 4.12% pipewire-pulse /user.slice/user-657345.slice/user@657345.service/session.slice/...
14.48% 2.07% perf /user.slice/user-657345.slice/user@657345.service/app.slice/...
14.30% 7.15% CompositorTileW /user.slice/user-657345.slice/user@657345.service/app.slice/...
13.33% 6.67% Timer /user.slice/user-657345.slice/user@657345.service/app.slice/...
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --off-cpu option to enable the off-cpu profiling with BPF. It'd
use a bpf_output event and rename it to "offcpu-time". Samples will
be synthesized at the end of the record session using data from a BPF
map which contains the aggregated off-cpu time at context switches.
So it needs root privilege to get the off-cpu profiling.
Each sample will have a separate user stacktrace so it will skip
kernel threads. The sample ip will be set from the stacktrace and
other sample data will be updated accordingly. Currently it only
handles some basic sample types.
The sample timestamp is set to a dummy value just not to bother with
other events during the sorting. So it has a very big initial value
and increase it on processing each samples.
Good thing is that it can be used together with regular profiling like
cpu cycles. If you don't want to that, you can use a dummy event to
enable off-cpu profiling only.
Example output:
$ sudo perf record --off-cpu perf bench sched messaging -l 1000
$ sudo perf report --stdio --call-graph=no
# Total Lost Samples: 0
#
# Samples: 41K of event 'cycles'
# Event count (approx.): 42137343851
...
# Samples: 1K of event 'offcpu-time'
# Event count (approx.): 587990831640
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... .................. .........................
#
81.66% 0.00% sched-messaging libc-2.33.so [.] __libc_start_main
81.66% 0.00% sched-messaging perf [.] cmd_bench
81.66% 0.00% sched-messaging perf [.] main
81.66% 0.00% sched-messaging perf [.] run_builtin
81.43% 0.00% sched-messaging perf [.] bench_sched_messaging
40.86% 40.86% sched-messaging libpthread-2.33.so [.] __read
37.66% 37.66% sched-messaging libpthread-2.33.so [.] __write
2.91% 2.91% sched-messaging libc-2.33.so [.] __poll
...
As you can see it spent most of off-cpu time in read and write in
bench_sched_messaging(). The --call-graph=no was added just to make
the output concise here.
It uses perf hooks facility to control BPF program during the record
session rather than adding new BPF/off-cpu specific calls.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220518224725.742882-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter