Export ddebug_exec_queries() for use by modules.
This will allow module authors to control all their *pr_debug*s
dynamically. And since ddebug_exec_queries() is what implements
"echo $query >control", it gives the same per-callsite control.
Virtues of this:
- simplicity. just an export.
- full control over any/all subsets of callsites.
- same "query/command-string" in code and console
- full callsite selectivity with module file line format
Format in particular deserves special attention; it is where
low-hanging fruit will be found.
Consider: drivers/gpu/drm/amd/display/include/logger_types.h:
#define DC_LOG_SURFACE(...) pr_debug("[SURFACE]:"__VA_ARGS__)
#define DC_LOG_HW_LINK_TRAINING(...) pr_debug("[HW_LINK_TRAINING]:"__VA_ARGS__)
.. 9 more ..
Thats 11 string prefixes, used in 804 places in drivers/gpu/**
Clearly this is a systematized classification of those callsites.
And one I'd expect to see repeated often.
Using ddebug_exec_queries(), authors can select on those prefixes
as a unitary set, equivalent to:
echo "module=MODULE_NAME format=^[SURFACE]: +p" >control
Trivially, those sets can be subsected with the other query terms too,
say file=foo, should the author see fit.
Perhaps as important, users can modify the set of enabled callsites,
presumably to aid debugging by enabling helpful debug callsites, and
disabling those that just clutter the info.
Authors could even alter [fmlt] flags, though I dont see a good reason
why they would. Perhaps harnessed by bug-logging automation to get
fuller, or more minimal bug-reports.
DRM
drm has both drm.debug, which defines 32 categories of drm_printk
logging, and entirely separate uses of pr_debug, which are dynamic on
this i915 laptop, running mainline. So I can observe and report on
both.
The i915 driver has 118 dyndbg callsites, with following
"classifications" defined in drivers/gpu/drm/i915/gvt/**
$ grep 915 /proc/dynamic_debug/control | cut -d= -f2 | cut -d: -f1,2 | sort -u
_ "gvt: cmd
_ "gvt: core
_ "gvt: dpy
_ "gvt: el
_ "gvt: irq
_ "gvt: mm
_ "gvt: mmio
_ "gvt: render
_ "gvt: sched
_ "%s for root hub!\012"
_ "Vendor defined info completion code %u\012"
This classification is entirely out-of-band for control by drm.debug,
and is only available to root user at the console. But module authors
can activate them with ddebug_exec_queries(sprintf("format=^%s +p")),
and then decide how to expose the groups to the user for max utility.
drm.debug
drm.debug has 32 bit-flags, and matching enum drm_debug_category
values to classify the ~2943 DRM_DEBUG*() callsites in drivers/gpu
The drm.debug callback could invoke ddebug_exec_queries() with 32
different hardcoded query strings, needing only (bit) ? " +p" : " -p"
added.
I briefly enabled drm.debug=0xff on my i915 laptop, which yielded
these unique prefixes: (dmesg | cut -c17- | cut -d\] -f1 | sort -u)
[drm:drm_atomic_check_only [drm
[drm:drm_atomic_get_crtc_state [drm
[drm:drm_atomic_get_plane_state [drm
[drm:drm_atomic_nonblocking_commit [drm
[drm:drm_atomic_set_fb_for_plane [drm
[drm:drm_atomic_state_default_clear [drm
[drm:__drm_atomic_state_free [drm
[drm:drm_atomic_state_init [drm
[drm:drm_crtc_vblank_helper_get_vblank_timestamp_internal [drm
[drm:drm_handle_vblank [drm
[drm:drm_ioctl [drm
[drm:drm_mode_addfb2 [drm
[drm:drm_mode_object_get [drm
[drm:drm_mode_object_put.part.0 [drm
[drm:drm_update_vblank_count [drm
[drm:drm_vblank_enable [drm
[drm:drm_vblank_restore [drm
[drm:vblank_disable_fn [drm
i915 0000:00:02.0: [drm:gen9_set_dc_state [i915
i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915
i915 0000:00:02.0: [drm:__intel_display_power_get_domain.part.0 [i915
i915 0000:00:02.0: [drm:__intel_display_power_put_domain [i915
i915 0000:00:02.0: [drm:intel_plane_atomic_calc_changes [i915
i915 0000:00:02.0: [drm:skl_enable_dc6 [i915
Several good format=^prefixes are apparent there, and some misses.
^[drm:drm_atomic_ # misses: [drm:__drm_atomic_state_free [drm
^[drm:drm_ioctl
^[drm:drm_mode
^[drm:drm_vblank_ # misses: [drm:drm_update_vblank_count & [drm:vblank_disable_fn
Its not a perfect 1:1 single format-match per class, but the misses
above can be covered with 1 & 2 additional queries, which can be
concatenated together with ";" separators and submitted with 1 call.
Benefits:
For drm, adapting DRM_DEBUG to use dynamic-debug inside could
replicate (and thereby obsolete) lots of bit-checking in current
DRM_DEBUG callsites, at least with JUMP_LABEL optimized code.
ddebug_exec_queries() and a handful of fixed query-strings can select
and thereby control the already classified callsites.
With the classes mapped to queries, the enum type and parameter can be
eliminated (folded away with macro magic), at least for DYNAMIC_DEBUG
& JUMP_LABEL builds.
Is it safe ?
ddebug_exec_queries() is currently exposed to user space in
several limited ways;
1 it is called from module-load callback, where it implements the
$modname.dyndbg=+p "fake" parameter provided to all modules.
2 it handles query input via >control directly
IOW, it is "fully" exposed to local root user; exposing the same
functionality to other kernel modules is no additional risk.
The other standard issue to check is locking:
dyndbg has a single mutex, taken by ddebug_change to handle >control,
and by ddebug_proc_(start|stop) to span `cat control`. Queries
submitted via export will typically have module specified, which
dramatically cuts the scan by ddebug_change vs "module=* +p".
ISTM this proposed export presents no locking problems.
TLDR;
It would be interesting to see how drm.dyndbg=$QUERY and
drm.debug=$HEXY would interact; it might be order dependent, as
if given as modprobe args or in /etc/modprobe.d/
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-19-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For log-message output, reduce column space consumed by current
pr_fmt by dropping __func__ and shortening "dynamic_debug" to
"dyndbg". This improves readability on narrow consoles, and better
matches other kernel boot info messages.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-18-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This should work:
echo module=amd* format=^[IF_TRACE]: +p >/proc/dynamic_debug/control
consider drivers/gpu/drm/amd/display/include/logger_types.h:
It has 11 defines like:
#define DC_LOG_IF_TRACE(...) pr_debug("[IF_TRACE]:"__VA_ARGS__)
These defines are used 804 times at recent count; they are a good use
case to evaluate existing format-message based classifications of
*pr_debug*. Those macros prefix the supplied format with a fixed
string, I'd expect most existing message classification schemes to do
something similar.
Hence we want to be able to anchor our match to the beginning of the
format string, allowing easy construction of clear and precise
queries, leveraging the existing classification scheme to enable and
disable those callsites.
Note that unlike other search terms, formats are implicitly floating
substring matches, without the need for explicit wildcards.
This makes no attempt at wider regex features, just the one we need.
TLDR: Using the anchor also means the []s are less helpful for
disamiguating the prefix from a random in-message occurrence, allowing
shorter prefixes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-17-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
flags & mask are used together everywhere, and are passed around
together between multiple functions; they belong together in a struct,
call that struct flag_settings.
Use struct flag_settings to rework 3 functions:
- ddebug_exec_query - declares query and flag-settings,
calls other 2, passing flags
- ddebug_parse_flags - fills flag_settings and returns
- ddebug_change - test all callsites against query,
modify passing sites.
benefits:
- bit-banging always needs flags & mask, best together.
- simpler function signatures
- 1 less parameter, less stack overhead
no functional changes
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code expects "keyword" "arg" as 2 words, space separated.
Change to also accept "keyword=arg" form as well, and drop !(nwords%2)
requirement. Then in rest of function, use new keyword, arg variables
instead of word[i], word[i+1]
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accept these additional query forms:
echo "file $filestr +_" > control
path/to/file.c:100 # as from control, column 1
path/to/file.c:1-100 # or any legal line-range
path/to/file.c:func_A # as from an editor/browser
path/to/file.c:drm_* # wildcards still work
path/to/file.c:*_foo # lead wildcard too
1st 2 examples are treated as line-ranges, 3-5 are treated as func's
Doc these changes, and sprinkle in a few extra wild-card examples and
trailing # explanation texts.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the code-block reusable to later handle "file foo.c:101-200" etc.
This is a 99% code move, with reindent, function wrap&call, +pr_debug.
no functional changes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loadable modules are the last in on this list, and are the only
modules that could be removed. ddebug_remove_module() searches from
head, but ddebug_add_module() uses list_add_tail(). Change it to
list_add() for a micro-optimization.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-11-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ddebug_exec_query declares an auto var, and passes it to
ddebug_parse_query, which memsets it before using it. Drop that
memset, instead initialize the variable in the caller; let the
compiler decide how to do it.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this pr_err attempts to print the string after the OP, but the string
has been parsed and chopped up, so looks empty.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
during dyndbg init, verbose logging prints its ram overhead. It
counted strlens of struct _ddebug's 4 string members, in all callsite
entries, which would be approximately correct if each had been
mallocd. But they are pointers into shared .rodata; for example, all
10 kobject callsites have identical filename, module values.
Its best not to count that memory at all, since we cannot know they
were linked in because of CONFIG_DYNAMIC_DEBUG=y, and we want to
report a number that reflects what ram is saved by deconfiguring it.
Also fix wording and size under-reporting of the __dyndbg section.
Heres my overhead, on a virtme-run VM on a fedora-31 laptop:
dynamic_debug:dynamic_debug_init: 260 modules, 2479 entries \
and 10400 bytes in ddebug tables, 138824 bytes in __dyndbg section
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dyndbg populates its callsite info into __verbose section, change that
to a more specific and descriptive name, __dyndbg.
Also, per checkpatch:
simplify __attribute(..) to __section(__dyndbg) declaration.
and 1 spelling fix, decriptor
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The verbose/debug logging done for `cat $MNT/dynamic_debug/control` is
voluminous (2 per control file entry + 2 per PAGE). Moreover, it just
prints pointer and sequence, which is not useful to a dyndbg user.
So just drop them.
Also require verbose>=2 for several other debug printks that are a bit
too chatty for typical needs;
ddebug_change() prints changes, once per modified callsite. Since
queries like "+p" will enable ~2300 callsites in a typical laptop, a
user probably doesn't need to see them often. ddebug_exec_queries()
still summarizes with verbose=1.
ddebug_(add|remove)_module() also print 1 line per action on a module,
not needed by typical modprobe user.
This leaves verbose=1 better focussed on the >control parsing process.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bad78c550 ("lib/dynamic_debug.c: use seq_open_private() instead of seq_open()")'
The commit was one of a tree-wide set which replaced open-coded
boilerplate with a single tail-call. It therefore obsoleted the
comment about that boilerplate, clean that up now.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of enabling dynamic debug globally with CONFIG_DYNAMIC_DEBUG,
CONFIG_DYNAMIC_DEBUG_CORE will only enable core function of dynamic
debug. With the DYNAMIC_DEBUG_MODULE defined for any modules, dynamic
debug will be tied to them.
This is useful for people who only want to enable dynamic debug for
kernel modules without worrying about kernel image size and memory
consumption is increasing too much.
[orson.zhai@unisoc.com: v2]
Link: http://lkml.kernel.org/r/1587408228-10861-1-git-send-email-orson.unisoc@gmail.com
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: http://lkml.kernel.org/r/1586521984-5890-1-git-send-email-orson.unisoc@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang warns:
../lib/dynamic_debug.c:1034:24: warning: array comparison always
evaluates to false [-Wtautological-compare]
if (__start___verbose == __stop___verbose) {
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are just
addresses. Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/894
Link: http://lkml.kernel.org/r/20200220051320.10739-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the realization that having debugfs enabled on "production" systems
is generally not a good idea, debugfs is being disabled from more and
more platforms over time. However, the functionality of dynamic
debugging still is needed at times, and since it relies on debugfs for
its user api, having debugfs disabled also forces dynamic debug to be
disabled.
To get around this, also create the "control" file for dynamic_debug in
procfs. This allows people turn on debugging as needed at runtime for
individual driverfs and subsystems.
Reported-by: many different companies
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200210211142.GB1373304@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: linux-kernel@vger.kernel.org
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This serves two purposes: First, we get a diagnostic if (though
extremely unlikely), any of the calls of ddebug_add_module for built-in
code fails, effectively disabling dynamic_debug. Second, I want to make
struct _ddebug opaque, and avoid accessing any of its members outside
dynamic_debug.[ch].
Link: http://lkml.kernel.org/r/20190212214150.4807-9-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only caller of ddebug_{add,remove}_module outside dynamic_debug.c is
kernel/module.c, which is obviously not itself modular (though it would
be an interesting exercise to make that happen...). I also fail to see
how these interfaces can be used by modules, in-tree or not.
Link: http://lkml.kernel.org/r/20190212214150.4807-8-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we store the passed-in string directly in ddebug_add_module, we
can use pointer equality instead of strcmp. This is a little more
efficient, but more importantly, this also makes the code somewhat more
correct:
Currently, if one loads and then unloads a module whose name happens to
match the KBUILD_MODNAME of some built-in functionality (which need not
even be modular at all), all of their dynamic debug entries vanish along
with those of the actual module. For example, loading and unloading a
core.ko hides all pr_debugs from drivers/base/core.c and other built-in
files called core.c (incidentally, there is an in-tree module whose name
is core, but I just tested this with an out-of-tree trivial one).
Link: http://lkml.kernel.org/r/20190212214150.4807-7-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For built-in modules, we're already reusing the passed-in string via
kstrdup_const(). But for actual modules (i.e. when we're called from
dynamic_debug_setup in module.c), the passed-in string (which points at
the name[] array inside struct module) is also guaranteed to live at
least as long as the struct ddebug_table, since free_module() calls
ddebug_remove_module().
Link: http://lkml.kernel.org/r/20190212214150.4807-6-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
line-range is supposed to treat "1-" as "1-endoffile", so
handle the special case by setting last_lineno to UINT_MAX.
Fixes this error:
dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1
dynamic_debug:ddebug_exec_query: query parse failed
Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although dynamic debug is often only used for debug builds, sometimes
its enabled for production builds as well. Minimize its impact by using
jump labels. This reduces the text section by 7000+ bytes in the kernel
image below. It does increase data, but this should only be referenced
when changing the direction of the branches, and hence usually not in
cache.
text data bss dec hex filename
8194852 4879776 925696 14000324 d5a0c4 vmlinux.pre
8187337 4960224 925696 14073257 d6bda9 vmlinux.post
Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using kstrdup_const, thus reusing .rodata when possible, saves around 2 kB
of runtime memory on my laptop/.config combination.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial tree changes from Jiri Kosina:
"Patches from trivial.git that keep the world turning around.
Mostly documentation and comment fixes, and a two corner-case code
fixes from Alan Cox"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kexec, Kconfig: spell "architecture" properly
mm: fix cleancache debugfs directory path
blackfin: mach-common: ints-priority: remove unused function
doubletalk: probe failure causes OOPS
ARM: cache-l2x0.c: Make it clear that cache-l2x0 handles L310 cache controller
msdos_fs.h: fix 'fields' in comment
scsi: aic7xxx: fix comment
ARM: l2c: fix comment
ibmraid: fix writeable attribute with no store method
dynamic_debug: fix comment
doc: usbmon: fix spelling s/unpriviledged/unprivileged/
x86: init_mem_mapping(): use capital BIOS in comment
Using seq_open_private() removes boilerplate code from ddebug_proc_open().
The resultant code is shorter and easier to follow.
This patch does not change any functionality.
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value is not used by callers of these functions
so change the functions to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This way we'll always know in what status the device is, unless it's
running normally (i.e. NETDEV_REGISTERED).
Also, emit a warning once in case of a bad reg_state.
CC: "David S. Miller" <davem@davemloft.net>
CC: Jason Baron <jbaron@akamai.com>
CC: Eric Dumazet <edumazet@google.com>
CC: Vlad Yasevich <vyasevic@redhat.com>
CC: stephen hemminger <stephen@networkplumber.org>
CC: Jerry Chu <hkchu@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
parse_lineno() returns either negative error code or zero. We don't
need to print something here because if parse_lineno fails it will print
error message.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add wildcard '*'(matches zero or more characters) and '?' (matches one
character) support when qurying debug flags.
Now we can open debug messages using keywords. eg:
1. open debug logs in all usb drivers
echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control
2. open debug logs for usb xhci code
echo "file *xhci* +p" > <debugfs>/dynamic_debug/control
Signed-off-by: Du, Changbin <changbin.du@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Settings of the form, 'line x module y +p', can fail arbitrarily due to an
uninitialized local variable. With this patch results are consistent, as
expected.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is kernel function to do the job in generic way. Let's use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are at least two users of isodigit(). Let's make it a public
function of ctype.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ma noted that dynamic-debug is silent about many query errors, so add
pr_err()s to explain those errors, and tweak a few others. Also parse
flags 1st, so that match-spec errs are slightly clearer.
CC: Jianpeng Ma <majianpeng@gmail.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vpr_info_dq should be a function and vpr_info should have
a do {} while (0)
Add missing newlines to pr_<level>s.
Miscellaneous neatening too.
braces, coalescing formats, alignments, etc...
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the custom implementation of the functionality similar to kbasename().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert direct calls of vprintk_emit and printk_emit to the
dev_ equivalents.
Make create_syslog_header static.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netdev_printk originally called dev_printk with %pV.
This style emitted the complete dev_printk header with
a colon followed by the netdev_name prefix followed
by a colon.
Now that netdev_printk does not call dev_printk, the
extra colon is superfluous. Remove it.
Example:
old: sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
new: sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of stack is used in recursive printks with %pV.
Using multiple levels of %pV (a logging function with %pV
that calls another logging function with %pV) can consume
more stack than necessary.
Avoid excessive stack use by not calling dev_printk from
netdev_printk and dynamic_netdev_dbg. Duplicate the logic
and form of dev_printk instead.
Make __netdev_printk static.
Remove EXPORT_SYMBOL(__netdev_printk)
Whitespace and brace style neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Cromie