On pre-ddi platforms we have slightly different code being
used for HDMI TMDS clock to dotclock conversion between the
state computation and state readout. Both of these need to
round the same way in order to not get a mismatch between
the computed and read out states. Fix up the rounding
direction in the readout path to match what is used during
state computation.
Another option would to just use intel_crtc_dotclock()
in the readout path as well, but I don't really want to
do that as the current code more accurately represents
how the hardware really works; The HDMI port register
defines whether we're actually outputting 8bpc or 12bpc
over HDMI, and the PIPECONF bpc setting just defines what
goes over FDI between the CPU and PCH. The fact that we
try to cram all that into a single pipe_bpp during state
computation is perhaps not entirely great...
Fixes: f2c9df1010 ("drm/i915: Round TMDS clock to nearest")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926193021.23287-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
During system resume DP MST requires AUX to be working already before
the HW state readout of the given encoder. Since AUX requires the
encoder/PHY TypeC mode to be initialized, which atm only happens during
HW state readout, these AUX transfers can change the TypeC mode
incorrectly (disconnecting the PHY for an enabled encoder) and trigger
the state check WARNs in intel_tc_port_sanitize().
Fix this by initializing the TypeC mode earlier both during driver
loading and system resume and making sure that the mode can't change
until the encoder's state is read out. While at it add the missing
DocBook comments and rename
intel_tc_port_sanitize()->intel_tc_port_sanitize_mode() for consistency.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922172148.2913088-1-imre.deak@intel.com
We currently have a debug message in intel_reference_shared_dpll()
but no counterpart in intel_unreference_shared_dpll(). Add one.
Switch to the [CRTC:...] notation for the pipe name while at it.
v2: Use drm_dbg_kms() instead of drm_dbg() (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191350.4303-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Do all the checks in intel_dp_initial_fastset_check() instead
of bailing out on the first condition that triggers.
This makes for better debug logs since we see all the reasons
why the full modeset computation is forced.
Also avoid the risk of someone accidentally adding a check
later in the function that would require connectors_changed=true
(ie. no fastset at all), but an earlier check may have already
bailed out with just mode_changed=true (ie. fastset is still
possible).
Pimp the debugs with the encoder id+name while at it.
v2: Call the return variable 'fastset' to convey its meaning
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191314.4252-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We always allocate two DPLLs (TC and TBT) for TC ports. This
is because we can't know ahead of time wherher we need to put
the PHY into DP-Alt or TBT mode.
However during readout we can obviously only read out the state
of the DPLL that the port is actually using. Thus the state after
readout will not have both DPLLs populated.
We run into problems if during readout the TC port is in DP-Alt
mode, but we then perform a modeset on the port without going
through the full .compute_config() machinery, and during said
modeset the port cannot be switched back into DP-Alt mode and
we need to take the TBT fallback path. Such a modeset can
happen eg. due to cdclk reprogramming.
This wasn't a problem earlier because we did all the DPLL
calculations much later in the modeset. So even if flagged
a modeset very late we'd still have gone through the DPLL
calculations. But now all the DPLL calculations happen much
earlier and so we need to deal with it, or else we'll attempt
a modeset without a DPLL.
To guarantee that we always have both DPLLs fully cal/ulated
for TC ports force a full modeset computation during the
initial commit.
v2: Avoid bitwise operation on bool (Jani)
Call the return variable 'fastset' to convey its meaning
Reported-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: b000abd3b3 ("drm/i915: Do .crtc_compute_clock() earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191236.4194-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Commit 00c6cbfd4e ("drm/i915: move pipe_mask and cpu_transcoder_mask
to runtime info") moved the pipe_mask member from struct
intel_device_info to intel_runtime_info, but overlooked some of our
platforms initializing device info .display = {}. This is significant,
as pipe_mask is the single point of truth for a device having a display
or not; the platforms in question left pipe_mask to whatever was set for
the platforms they "inherit" from in the complex macro scheme we have.
Add new NO_DISPLAY macro initializing .__runtime.pipe_mask = 0, which
will cause the device info .display sub-struct to be zeroed in
intel_device_info_runtime_init(). A better solution (or simply audit of
proper use of HAS_DISPLAY() checks) is required before moving forward
with [1].
Also clear all the display related members in runtime info if there's no
display. The latter is a bit tedious, but it's for completeness at this
time, to ensure similar functionality as before.
[1] https://lore.kernel.org/r/dfda1bf67f02ceb07c280b7a13216405fd1f7a34.1660137416.git.jani.nikula@intel.com
Fixes: 00c6cbfd4e ("drm/i915: move pipe_mask and cpu_transcoder_mask to runtime info")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Maarten Lankhort <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082642.3451961-1-jani.nikula@intel.com
We can simplify the vlv watermark sanitation by reusing the
second half of vlv_compute_pipe_wm() to convert the sanitized
raw watermarks into the proper form to be used as the
optimal/intermediate watermarks.
Also to be consistent with normal watermark computation the sanitized
watermarks should be all 0 for any disabled plane. Previously we
zeroed out the watermarks only up to the level (ie. PM2/5/DVDFS)
that was enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We can simplify the g4x watermark sanitation by reusing the
second half of g4x_compute_pipe_wm() to convert the sanitized
raw watermarks into the proper form to be used as the
optimal/intermediate watermarks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Split vlv_compute_pipe_wm() into two halves. The first half computes
the new raw watermarks, and the second half munges those up into real
watermarks for the particular pipe.
We can reuse the second half for watermark sanitation as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanslav.lisovskiy@intel.com>
Split g4x_compute_pipe_wm() into two halves. The first half computes
the new raw watermarks, and the second half munges those up into real
watermarks for the particular pipe.
We can reuse the second half for watermark sanitation as well.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-2-ville.syrjala@linux.intel.com
In the unlikely case of not finding a fixed mode don't register
the eDP connector. I think there are some places where we'd oops
if we didn't have a fixed mode for eDP so presumable this doesn't
typically happen. But better safe than sorry.
Also pimp the debugs with the encoder id+name. I think dumping
the encoder rather than the connector provides more information
here (eg. to match against the port information in the VBT).
We can also drop the extra check from intel_edp_add_properties().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
All the connectors are zero initialized so no need to clear
the *_allowed flags we don't support. Only leave the ones we want
to set. And while at it switch to booleans instead of ints.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Consolidate the scaling_mode property setup into a single
place.
The one slight complicateion here is that GMCH platforms can't
do the CENTER mode except on the LVDS port. But we can deal with
that by just checking the connector type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pull the eDP backlight setup into its own function. No
reason to pollute intel_edp_init_connector() with all
the mundane details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-7-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Most of our encoder type cast stuff already operates on
intel_encoder rather than drm_encoder. Switch to_lvds_encoder()
over as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-6-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Most places that deal with output types already use BIT()
but a few places still use manual shifts. Convert the
stragglers over to BIT().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Drop the pointless middle man variable and just return the
correct thing directly. And while at it change the return
type to u32 since this is a register value we're returning.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-3-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use *_hpd_invert() helpers whenever possible to isolate logic specific
to hotplug inversion from common HPD setup logic to improve readability
and maintainability of the source code.
While we only define dg1_hpd_invert() here, future platforms are likely
to have different hotplug inversion needs, thus it makes sense grouping
different implementations under a common suffix.
v2: Fix coding style and prefer to use small *_hdp_invert() helpers
instead of a generic one.
CC: Jani Nikula <jani.nikula@linux.intel.com>
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922164949.163985-1-gustavo.sousa@intel.com
Expand the current stepping convention to accommodate the GMD
stepping info. Typically GMD step maps to letter stepping
by "A + step %4" and number to "A + step /4" i.e, GMD step
0 maps to STEP_A0, 1 to _A1, 2 to _A2, 3 to _A3, 4 to STEP_B0...
Future platforms might break this formulae and may require a table
mapping to decode GMD step compatible with the convention.
v2:
- Pass the updated ip version structure
v3:
- Skip using GMD to step table(MattR)
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-3-radhakrishna.sripada@intel.com
Going forward, the hardware teams no longer consider new platforms to
have a "generation" in the way we've defined it for past platforms.
Instead, each IP block (graphics, media, display) will have their own
architecture major.minor versions and stepping ID's which should be read
directly from a register in the MMIO space.
Bspec: 63361, 64111
v2:
- Move the IP version readout to intel_device_info.c
- Convert the macro into a function
v3:
- Move subplatform init to runtime early init
- Cache runtime ver, release info to compare with hardware values.
- Use IP_VER for snaity check(MattR)
v4:
- Minor doccumentation changes.
- Normalize HAS_GMD_ID macro value.(JaniN)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-2-radhakrishna.sripada@intel.com
Remove the old tales about 90/270 degree rotation
effectively preventing FBC. That hasn't been true since
we stopped demanding the fence is present in
commit 691f7ba58d ("drm/i915/display/fbc: Make fences
a nice-to-have for GEN9+")
Also fix up the multiline comment formatting while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916165206.1499-2-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coeho <luciano.coelho@intel.com>
Replace the mutex_is_locked() stuff with lockdep_assert_held() since
that's what it's there for.
Also sprinkle these around so that we have more or less
mirrored coverage for the enable vs. disable instead of the
current situation where the asserts seem to be more or less
randomly thrown around.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620182917.10765-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Move the flip_pending assignment into __intel_fbc_post_update()
from intel_fbc_post_update(). Now mirrors the pre_update() side.
The only reason the assignment was in the higher level function
is that we used to call __intel_fbc_post_update() from elsewhere
as well. That got cleaned up in commit b39d2c6202 ("drm/i915/fbc:
Call intel_fbc_activate() directly from frontbuffer flush")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620182917.10765-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
We don't parse the VBT vswing/preemphassis tables at all currently.
Let's WARN if a port wants to use them so we get a heads up that
whether we really need to implement this stuff or not. My
current stash contains no VBTs with this bit set.
v2: Move to print_ddi_port() (Jani)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204132.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The ipc_enabled member was supposed to be moved under the display wm
sub-struct, but due to a rebase fail only the new one was added and the
old one was left behind. Finish the job.
Fixes: 70296670f6 ("drm/i915/display: move IPC under display wm sub-struct")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916113850.3712354-1-jani.nikula@intel.com
Rename intel_hpd_init_work() to the more generic intel_hpd_init_early(),
and move the hotplug storm initialization there. This lets us move the
HPD_STORM_DEFAULT_THRESHOLD macro to intel_hotplug.c too.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916130634.3781122-2-jani.nikula@intel.com
All of the functions used for intel_dvo_dev_ops.mode_valid have a return
type of enum drm_mode_status, but the mode_valid field in the struct
definition has a return type of int.
The mismatched return type breaks forward edge kCFI since the underlying
function definitions do not match the function hook definition.
The return type of the mode_valid field should be changed from int to
enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913205531.155046-1-nhuck@google.com
In Display version 14, Transcoder Chicken Registers have updated address.
This patch performs checks to use the right register when required.
v2: Omit display version check in i915_reg.h(Jani)
v3:
- Remove extra whitespace introduced
- Fix reg definitions for MTL_CHICKEN_TRANS(MattR)
Bspec: 34387, 50054
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913183341.908028-6-radhakrishna.sripada@intel.com
Display version 14 platforms have different credits values
compared to ADL-P. Update the credits based on pipe usage.
v2: Simplify DBOX BW Credit definition(MattR)
v3:
- Simplify only pipe per dbuf bank check(MattR)
- Skip modeset check to handle the case when a new pipe within
dbuf bank gets added/removed.(MattR)
Bspec: 49213
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Original Author: Caz Yokoyama
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913183341.908028-5-radhakrishna.sripada@intel.com
Convert dsc debugfs entry from output_bpp to input_bpc. The rationale
is to validate different input bpc across various platforms.
v2: -improved commit message (Jani N)
-styling fixes (Jani N)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902190658.9459-2-swati2.sharma@intel.com
It looks like trying to enable IPC via debugfs on platforms that don't
have IPC resulted in dmesg info message about IPC being enabled, which
is clearly not possible and would not happen.
Seems sensible to register IPC debugfs only on platforms that have IPC.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b18edb4f96c9d2ec728ef04e6f99d161fe5641d1.1662983005.git.jani.nikula@intel.com
Follow the new direction for debugfs files, moving the details where the
implementation is. It seems quite natural skl_watermark.c is the place
that controls IPC details, even for debugfs, not
intel_display_debugfs.c.
Rename the functions and convert dev_priv->i915 while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9d59b18f5dc06e86a48c1ce0f40d625f51e3e85a.1662983005.git.jani.nikula@intel.com
Use existing drm_atomic_helper_damage_merged from generic drm code
instead of implementing own loop to iterate over damage_clips.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823112920.352563-4-jouni.hogander@intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
drm_plane_state->src is modified when offset is calculated:
before calculation:
src.x1 = 8192, src.y1 = 8192
after calculation (pitch = 65536, cpp = 4, alignment = 262144)
src.x1 = 8192, src.y1 = 0, offset = 0x20000000
Damage clips are relative to original coodrdinates provided by
user-space. To compare these against src coordinates we need to use
original coordinates as provided by user-space. These can be obtained
by using drm_plane_state_src.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823112920.352563-3-jouni.hogander@intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Ville Syrjälä