gcc-6 started warning by default about variables that are not
used anywhere and that are marked 'const', generating many
false positives in an allmodconfig build, e.g.:
arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=]
arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=]
drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=]
drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=]
drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=]
drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=]
This is similar to the existing -Wunused-but-set-variable warning
that was added in an earlier release and that we disable by default
now and only enable when W=1 is set, so it makes sense to do
the same here. Once we have eliminated the majority of the
warnings for both, we can put them back into the default list.
We probably want this in backport kernels as well, to allow building
them with gcc-6 without introducing extra warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
When gcov profiling is enabled, we see a lot of spurious warnings about
possibly uninitialized variables being used:
arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page':
arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup':
drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized]
kernel/cgroup.c: In function 'cgroup_mount':
kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized]
All of these are false positives, so it seems better to just disable
the warnings whenever GCOV is enabled. Most users don't enable GCOV,
and based on a prior patch, it is now also disabled for 'allmodconfig'
builds, so there should be no downsides of doing this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Enabling CONFIG_GCOV_PROFILE_ALL produces us a lot of warnings like
lib/lz4/lz4hc_compress.c: In function 'lz4_compresshcctx':
lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1504 bytes is larger than 1024 bytes [-Wframe-larger-than=]
After some investigation, I found that this behavior started with gcc-4.9,
and opened https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69702.
A suggested workaround for it is to use the -fno-tree-loop-im
flag that turns off one of the optimization stages in gcc, so the
code runs a little slower but does not use excessive amounts
of stack.
We could make this conditional on the gcc version, but I could not
find an easy way to do this in Kbuild and the benefit would be
fairly small, given that most of the gcc version in production are
affected now.
I'm marking this for 'stable' backports because it addresses a bug
with code generation in gcc that exists in all kernel versions
with the affected gcc releases.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.com>
CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints
incorrect warnings about a lot of variables that it thinks can be used
uninitialized, e.g.:
i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer':
i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function
iio/gyro/itg3200_core.c: In function 'itg3200_probe':
iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function
leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits':
leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function
misc/bmp085.c: In function 'show_pressure':
misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function
power/ds2782_battery.c: In function 'ds2786_get_capacity':
power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function
These are all false positives that either rob someone's time when trying
to figure out whether they are real, or they get people to send wrong
patches to shut up the warnings.
Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in
production, so disabling the whole class of warnings for this configuration
has no serious downsides either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedtgoodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
When the kernel path contains a space or a colon somewhere in the path
name, the modules_install target doesn't work anymore, as the path names
are not enclosed in double quotes. It is also supposed that and O= build
will suffer from the same weakness as modules_install.
Instead of checking and improving kbuild to resist to directories
including these characters, error out early to prevent any build if the
kernel's main directory contains a space.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
The if_changed directive is useless against phony targets.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2441e78b19 ("kbuild: better abstract vmlinux sequential prerequisites")
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When CONFIG_TRIM_UNUSED_KSYMS=y and CONFIG_BUILD_DOCSRC=y it is possible
to get the following error:
ERROR: "cn_del_callback" [Documentation/connector/cn_test.ko] undefined!
ERROR: "cn_add_callback" [Documentation/connector/cn_test.ko] undefined!
ERROR: "cn_netlink_send" [Documentation/connector/cn_test.ko] undefined!
../scripts/Makefile.modpost:91: recipe for target '__modpost' failed
It is not sufficient to do "vmlinux-dirs += Documentation" as this also
depends on the headers_check target, and all of this needs to be done
before adjust_autoksyms.sh is executed.
Let's sort this out by gathering those sequential prerequisites in a make
target of their own, separate from the vmlinux target. And by doing so,
the special autoksyms_recursive target is no longer needed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
When a different output directory is specified during the build process (with
O= or KBUILD_OUTPUT), the call to adjust_autoksyms.sh script fails with the
following error:
/bin/sh scripts/adjust_autoksyms.sh \
"make KBUILD_MODULES=1 -f ../Makefile autoksyms_recursive"
/bin/sh: scripts/adjust_autoksyms.sh: No such file or directory
make[2]: *** [vmlinux] Error 127
make[1]: *** [sub-make] Error 2
make: *** [__sub-make] Error 2
Using the absolute path with $(srctree) variable solves the problem.
This is in case the CONFIG_TRIM_UNUSED_KSYMS option is specified.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 23121ca2b5 ("kbuild: create/adjust generated/autoksyms.h")
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull objtool fixes from Ingo Molnar:
"A handful of objtool fixes: two improvements to how warnings are
printed plus a false positive warning fix, and build environment fix"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix Makefile to properly see if libelf is supported
objtool: Detect falling through to the next function
objtool: Add workaround for GCC switch jump table bug
When doing a make allmodconfig, I hit the following compile error:
In file included from builtin-check.c:32:0:
elf.h:22:18: fatal error: gelf.h: No such file or directory
compilation terminated.
...
Digging into it, it appears that the $(shell ..) command in the Makefile does
not give the proper result when it fails to find -lelf, and continues to
compile objtool.
Instead, use the "try-run" makefile macro to perform the test. This gives a
proper result for both cases.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: 442f04c34a ("objtool: Add tool to perform compile-time stack metadata validation")
Link: http://lkml.kernel.org/r/20160420153234.GA24032@home.goodmis.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Obviously, the "help" should be a PHONY target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
As in other places, PHONY is a better fit for "modules" and
"modules_install".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
These targets are marked as PHONY. No need to add FORCE to their
dependency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Make sample modules in parallel with the rest of the kernel rather
than having them built from the vmlinux target. This makes the build
slightly faster, and those modules are properly considered when
adjust_autoksyms.sh is executed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Given the list of exported symbols needed by all modules, we can create
a header file containing preprocessor defines for each of those symbols.
Also, when some symbols are added and/or removed from the list, we can
update the time on the corresponding files used as build dependencies for
those symbols. And finally, if any symbol did change state, the
corresponding source files must be rebuilt.
The insertion or removal of an EXPORT_SYMBOL() entry within a module may
create or remove the need for another exported symbol. This is why this
operation has to be repeated until the list of needed exported symbols
becomes stable. Only then the final kernel and modules link take place.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Similar to include/generated/autoconf.h, include/generated/autoksyms.h
will contain a list of defines for each EXPORT_SYMBOL() that we want
active. The format is:
#define __KSYM_<symbol_name> 1
This list will be auto-generated with another patch. For now we only
include the preprocessor magic to automatically create or omit the
corresponding struct kernel_symbol declaration.
Given the content of include/generated/autoksyms.h may not be known in
advance, an empty file is created early on to let the build proceed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Pull kbuild updates from Michal Marek:
- make dtbs_install fix
- Error handling fix fixdep and link-vmlinux.sh
- __UNIQUE_ID fix for clang
- Fix for if_changed_* to suppress the "is up to date." message
- The kernel is built with -Werror=incompatible-pointer-types
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Add option to turn incompatible pointer check into error
kbuild: suppress annoying "... is up to date." message
kbuild: fixdep: Check fstat(2) return value
scripts/link-vmlinux.sh: force error on kallsyms failure
Kbuild: provide a __UNIQUE_ID for clang
dtbsinstall: don't move target directory out of the way
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing). Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system. A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/). However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.
kcov does not aim to collect as much coverage as possible. It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g. scheduler, locking).
Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes. Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch). I've
dropped the second mode for simplicity.
This patch adds the necessary support on kernel side. The complimentary
compiler support was added in gcc revision 231296.
We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:
https://github.com/google/syzkaller/wiki/Found-Bugs
We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation". For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.
Why not gcov. Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat. A
typical coverage can be just a dozen of basic blocks (e.g. an invalid
input). In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M). Cost of
kcov depends only on number of executed basic blocks/edges. On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.
kcov exposes kernel PCs and control flow to user-space which is
insecure. But debugfs should not be mapped as user accessible.
Based on a patch by Quentin Casasnovas.
[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull 'objtool' stack frame validation from Ingo Molnar:
"This tree adds a new kernel build-time object file validation feature
(ONFIG_STACK_VALIDATION=y): kernel stack frame correctness validation.
It was written by and is maintained by Josh Poimboeuf.
The motivation: there's a category of hard to find kernel bugs, most
of them in assembly code (but also occasionally in C code), that
degrades the quality of kernel stack dumps/backtraces. These bugs are
hard to detect at the source code level. Such bugs result in
incorrect/incomplete backtraces most of time - but can also in some
rare cases result in crashes or other undefined behavior.
The build time correctness checking is done via the new 'objtool'
user-space utility that was written for this purpose and which is
hosted in the kernel repository in tools/objtool/. The tool's (very
simple) UI and source code design is shaped after Git and perf and
shares quite a bit of infrastructure with tools/perf (which tooling
infrastructure sharing effort got merged via perf and is already
upstream). Objtool follows the well-known kernel coding style.
Objtool does not try to check .c or .S files, it instead analyzes the
resulting .o generated machine code from first principles: it decodes
the instruction stream and interprets it. (Right now objtool supports
the x86-64 architecture.)
From tools/objtool/Documentation/stack-validation.txt:
"The kernel CONFIG_STACK_VALIDATION option enables a host tool named
objtool which runs at compile time. It has a "check" subcommand
which analyzes every .o file and ensures the validity of its stack
metadata. It enforces a set of rules on asm code and C inline
assembly code so that stack traces can be reliable.
Currently it only checks frame pointer usage, but there are plans to
add CFI validation for C files and CFI generation for asm files.
For each function, it recursively follows all possible code paths
and validates the correct frame pointer state at each instruction.
It also follows code paths involving special sections, like
.altinstructions, __jump_table, and __ex_table, which can add
alternative execution paths to a given instruction (or set of
instructions). Similarly, it knows how to follow switch statements,
for which gcc sometimes uses jump tables."
When this new kernel option is enabled (it's disabled by default), the
tool, if it finds any suspicious assembly code pattern, outputs
warnings in compiler warning format:
warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch
warning: objtool: cik_tiling_mode_table_init()+0x6ce: call without frame pointer save/setup
warning: objtool:__schedule()+0x3c0: duplicate frame pointer save
warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer
... so that scripts that pick up compiler warnings will notice them.
All known warnings triggered by the tool are fixed by the tree, most
of the commits in fact prepare the kernel to be warning-free. Most of
them are bugfixes or cleanups that stand on their own, but there are
also some annotations of 'special' stack frames for justified cases
such entries to JIT-ed code (BPF) or really special boot time code.
There are two other long-term motivations behind this tool as well:
- To improve the quality and reliability of kernel stack frames, so
that they can be used for optimized live patching.
- To create independent infrastructure to check the correctness of
CFI stack frames at build time. CFI debuginfo is notoriously
unreliable and we cannot use it in the kernel as-is without extra
checking done both on the kernel side and on the build side.
The quality of kernel stack frames matters to debuggability as well,
so IMO we can merge this without having to consider the live patching
or CFI debuginfo angle"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
objtool: Only print one warning per function
objtool: Add several performance improvements
tools: Copy hashtable.h into tools directory
objtool: Fix false positive warnings for functions with multiple switch statements
objtool: Rename some variables and functions
objtool: Remove superflous INIT_LIST_HEAD
objtool: Add helper macros for traversing instructions
objtool: Fix false positive warnings related to sibling calls
objtool: Compile with debugging symbols
objtool: Detect infinite recursion
objtool: Prevent infinite recursion in noreturn detection
objtool: Detect and warn if libelf is missing and don't break the build
tools: Support relative directory path for 'O='
objtool: Support CROSS_COMPILE
x86/asm/decoder: Use explicitly signed chars
objtool: Enable stack metadata validation on 64-bit x86
objtool: Add CONFIG_STACK_VALIDATION option
objtool: Add tool to perform compile-time stack metadata validation
x86/kprobes: Mark kretprobe_trampoline() stack frame as non-standard
sched: Always inline context_switch()
...
This update for Kselftest adds:
- A new feature to create test-specific kconfig fragments.
This feature helps configure Kselftests to test specific
Kernel Configuration options as opposed to defconfig.
- A new test for Media Controller API
- A few fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Sk1k
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update for Kselftest adds:
- A new feature to create test-specific kconfig fragments. This
feature helps configure Kselftests to test specific Kernel
Configuration options as opposed to defconfig.
- A new test for Media Controller API
- A few fixes"
* tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: media_dcevice_test fix usage information
selftests: media_dcevice_test fix to handle ioctl failure case
selftests: add missing .gitignore file or entry
Makefile: add kselftest-merge
selftests: create test-specific kconfig fragments
selftests: breakpoint: add step_after_suspend_test
selftests: add a new test for Media Controller API
With the introduction of the simple wait API we have two very
similar APIs in the kernel. For example wake_up() and swake_up()
is only one character away. Although the compiler will warn
happily the wrong usage it keeps on going an even links the kernel.
Thomas and Peter would rather like to see early missuses reported
as error early on.
In a first attempt we tried to wrap all swait and wait calls
into a macro which has an compile time type assertion. The result
was pretty ugly and wasn't able to catch all wrong usages.
woken_wake_function(), autoremove_wake_function() and wake_bit_function()
are assigned as function pointers. Wrapping them with a macro around is
not possible. Prefixing them with '_' was also not a real option
because there some users in the kernel which do use them as well.
All in all this attempt looked to intrusive and too ugly.
An alternative is to turn the pointer type check into an error which
catches wrong type uses. Obviously not only the swait/wait ones. That
isn't a bad thing either.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
With CONFIG_STACK_VALIDATION enabled, if the host system doesn't have
a development version of libelf installed, the build fails with errors
like:
elf.h:22:18: fatal error: gelf.h: No such file or directory compilation terminated.
Instead of failing to build, instead just print a warning and disable
stack validation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next@vger.kernel.org
Cc: linux@roeck-us.net
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/8c27fe00face60f42e888ddb3142c97e45223165.1457026550.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Running "make O=foo" (with a relative directory path) fails with:
scripts/Makefile.include:3: *** O=foo does not exist. Stop.
/home/jpoimboe/git/linux/Makefile:1547: recipe for target 'tools/objtool' failed
The tools Makefile gets confused by the relative path and tries to build
objtool in tools/foo. Convert the output directory to an absolute path
before passing it to the tools Makefile.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next@vger.kernel.org
Cc: linux@roeck-us.net
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/94a078c6c998fac9f01a14f574008bf7dff40191.1457016803.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a CONFIG_STACK_VALIDATION option which will run "objtool check" for
each .o file to ensure the validity of its stack metadata.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/92baab69a6bf9bc7043af0bfca9fb964a1d45546.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add kselftest-merge to enable the dependencies of kernel config
for all the kselftest testcases. User should call it after create
the kernel configuration(.config), eg:
$ make kselftest-merge
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
UBSAN uses compile-time instrumentation to catch undefined behavior
(UB). Compiler inserts code that perform certain kinds of checks before
operations that could cause UB. If check fails (i.e. UB detected)
__ubsan_handle_* function called to print error message.
So the most of the work is done by compiler. This patch just implements
ubsan handlers printing errors.
GCC has this capability since 4.9.x [1] (see -fsanitize=undefined
option and its suboptions).
However GCC 5.x has more checkers implemented [2].
Article [3] has a bit more details about UBSAN in the GCC.
[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
[3] - http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/
Issues which UBSAN has found thus far are:
Found bugs:
* out-of-bounds access - 97840cb67f ("netfilter: nfnetlink: fix
insufficient validation in nfnetlink_bind")
undefined shifts:
* d48458d4a7 ("jbd2: use a better hash function for the revoke
table")
* 10632008b9 ("clockevents: Prevent shift out of bounds")
* 'x << -1' shift in ext4 -
http://lkml.kernel.org/r/<5444EF21.8020501@samsung.com>
* undefined rol32(0) -
http://lkml.kernel.org/r/<1449198241-20654-1-git-send-email-sasha.levin@oracle.com>
* undefined dirty_ratelimit calculation -
http://lkml.kernel.org/r/<566594E2.3050306@odin.com>
* undefined roundown_pow_of_two(0) -
http://lkml.kernel.org/r/<1449156616-11474-1-git-send-email-sasha.levin@oracle.com>
* [WONTFIX] undefined shift in __bpf_prog_run -
http://lkml.kernel.org/r/<CACT4Y+ZxoR3UjLgcNdUm4fECLMx2VdtfrENMtRRCdgHB2n0bJA@mail.gmail.com>
WONTFIX here because it should be fixed in bpf program, not in kernel.
signed overflows:
* 32a8df4e0b ("sched: Fix odd values in effective_load()
calculations")
* mul overflow in ntp -
http://lkml.kernel.org/r/<1449175608-1146-1-git-send-email-sasha.levin@oracle.com>
* incorrect conversion into rtc_time in rtc_time64_to_tm() -
http://lkml.kernel.org/r/<1449187944-11730-1-git-send-email-sasha.levin@oracle.com>
* unvalidated timespec in io_getevents() -
http://lkml.kernel.org/r/<CACT4Y+bBxVYLQ6LtOKrKtnLthqLHcw-BMp3aqP3mjdAvr9FULQ@mail.gmail.com>
* [NOTABUG] signed overflow in ktime_add_safe() -
http://lkml.kernel.org/r/<CACT4Y+aJ4muRnWxsUe1CMnA6P8nooO33kwG-c8YZg=0Xc8rJqw@mail.gmail.com>
[akpm@linux-foundation.org: fix unused local warning]
[akpm@linux-foundation.org: fix __int128 build woes]
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yury Gribov <y.gribov@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild updates from Michal Marek:
- Make <modname>-m in makefiles work like <modname>-y and fix the
fallout
- Minor genksyms fix
- Fix race with make -j install modules_install
- Move -Wsign-compare from make W=1 to W=2
- Other minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Demote 'sign-compare' warning to W=2
Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
kbuild: Do not run modules_install and install in paralel
genksyms: Handle string literals with spaces in reference files
fixdep: constify strrcmp arguments
ath10k: Fix build with CONFIG_THERMAL=m
Revert "drm: Hack around CONFIG_AGP=m build failures"
kbuild: Allow to specify composite modules with modname-m
staging/ad7606: Actually build the interface modules
Commit 6271897978 ("Makefile: Document ability to make file.lst
and file.S") document ability to make file.S, but there isn't such
ability in kbuild, so revert it.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Based on a x86-only patch by Andy Lutomirski <luto@amacapital.net>
With modular kernels, 'make install' is going to need the installed
modules at some point to generate the initramfs.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild update from Michal Marek:
"The kbuild branch for v4.4-rc1 only has one commit: A new make
kselftest-clean target cleans tools/testing/selftests"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kselftest: add kselftest-clean rule
handling.
PPC: Mostly bug fixes.
ARM: No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite for
IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86: quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new component (in
virt/lib/) that connects VFIO and KVM together. The same infrastructure
will be used for ARM interrupt forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic interrupt
controller will have to wait for 4.5. These will let KVM expose Hyper-V
devices.
- nested virtualization now supports VPID (same as PCID but for vCPUs)
which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for clflushopt,
clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in
userspace, which reduces the attack surface of the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten to not
require help from the hypervisor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWO2IQAAoJEL/70l94x66D/K0H/3AovAgYmJQToZlimsktMk6a
f2xhdIqfU5lIQQh5uNBCfL3o9o8H9Py1ym7aEw3fmztPHHJYc91oTatt2UEKhmEw
VtZHp/dFHt3hwaIdXmjRPEXiYctraKCyrhaUYdWmUYkoKi7lW5OL5h+S7frG2U6u
p/hFKnHRZfXHr6NSgIqvYkKqtnc+C0FWY696IZMzgCksOO8jB1xrxoSN3tANW3oJ
PDV+4og0fN/Fr1capJUFEc/fejREHneANvlKrLaa8ht0qJQutoczNADUiSFLcMPG
iHljXeDsv5eyjMtUuIL8+MPzcrIt/y4rY41ZPiKggxULrXc6H+JJL/e/zThZpXc=
=iv2z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.4.
s390:
A bunch of fixes and optimizations for interrupt and time handling.
PPC:
Mostly bug fixes.
ARM:
No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite
for IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86:
Quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new
component (in virt/lib/) that connects VFIO and KVM together.
The same infrastructure will be used for ARM interrupt
forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic
interrupt controller will have to wait for 4.5. These will let
KVM expose Hyper-V devices.
- nested virtualization now supports VPID (same as PCID but for
vCPUs) which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for
clflushopt, clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel +
IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten
to not require help from the hypervisor"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
KVM: VMX: Fix commit which broke PML
KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
KVM: x86: allow RSM from 64-bit mode
KVM: VMX: fix SMEP and SMAP without EPT
KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
KVM: device assignment: remove pointless #ifdefs
KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
KVM: x86: zero apic_arb_prio on reset
drivers/hv: share Hyper-V SynIC constants with userspace
KVM: x86: handle SMBASE as physical address in RSM
KVM: x86: add read_phys to x86_emulate_ops
KVM: x86: removing unused variable
KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
KVM: arm/arm64: Optimize away redundant LR tracking
KVM: s390: use simple switch statement as multiplexer
KVM: s390: drop useless newline in debugging data
KVM: s390: SCA must not cross page boundaries
KVM: arm: Do not indent the arguments of DECLARE_BITMAP
...
some new CAN driver documentation. Beyond that, we have kernel-doc fixes,
a bit more work to support reproducible builds, and the usual collection of
small fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=emZ7
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux
Pull documentation update from Jon Corbet:
"There is a nice new document from Neil on how pathname lookups work
and some new CAN driver documentation. Beyond that, we have
kernel-doc fixes, a bit more work to support reproducible builds, and
the usual collection of small fixes"
* tag 'docs-for-linus' of git://git.lwn.net/linux: (34 commits)
Documentation: add new description of path-name lookup.
Documentation/vm/slub.txt: document slabinfo-gnuplot.sh
Doc: ABI/stable: Fix typo in ABI/stable
doc: Clarify that nmi_watchdog param is for hardlockups
Typo correction for description in gpio document.
DocBook: Fix kernel-doc to be case-insensitive for private:
kernel-docs.txt: update kernelnewbies reference
Doc:kvm: Fix typo in Doc/virtual/kvm
Documentation/Changes: Add bc in "Current Minimal Requirements" section
Documentation/email-clients.txt: remove trailing whitespace
DocBook: Use a fixed encoding for output
MAINTAINERS: The docs tree has moved
Docs/kernel-parameters: Add earlycon devicetree usage
SubmittingPatches: make Subject examples match the de facto standard
Documentation: gpio: mention that <function>-gpio has been deprecated
Documentation: cgroups: just fix a few typos
Documentation: Update kselftest.txt
Documentation: DMA API: Be more explicit that nents is always the same
Documentation: Update the default value of crashkernel low
zram: update documentation
...
We use
$make TARGETS="size timers" kselftest
to build and run selftests. but there is no rule
for us to clean the kselftest generated files.
This patch add the rules, for example:
$ make TARGETS="size timers" kselftest-clean
can clean all kselftest generated files.
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
We need to build files in virt/lib/, which are now used by
KVM and VFIO, so add virt directory to the top Makefile.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the encoding of documents generated by DocBook depends on
the current locale. Make the output reproducible independently of
the locale, by setting the encoding to UTF-8 (LC_CTYPE=C.UTF-8) by
preference, or ASCII (LC_CTYPE=C) as a fallback.
LC_CTYPE can normally be overridden by LC_ALL, but the top-level
Makefile unsets that.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[jc: added check-lc_ctype to .gitignore]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Pull misc kbuild updates from Michal Marek:
- deb-pkg:
+ module signing fix
+ dtb files are added to the package
+ do not require `hostname -f` to work during build
+ make deb-pkg generates a source package, bindeb-pkg has been
added to only generate the binary package
- rpm-pkg packages /lib/modules as well
- new coccinelle patch and updates to existing ones
- new stackusage & stackdelta script to collect and compare stack usage
info (using gcc's -fstack-usage)
- make tags understands trace_*_rcuidle() macros
- .gitignore updates, misc cleanups
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (27 commits)
deb-pkg: add source package
package/Makefile: move source tar creation to a function
scripts: add stackdelta script
kbuild: remove *.su files generated by -fstack-usage
.gitignore: add *.su pattern
scripts: add stackusage script
kbuild: avoid listing /lib/modules in kernel spec file
fallback to hostname in scripts/package/builddeb
coccinelle: api: extend spatch for dropping unnecessary owner
deb-pkg: simplify directory creation
scripts/tags.sh: Include trace_*_rcuidle() in tags
scripts/package/Makefile: rpmbuild is needed for rpm targets
Kbuild: Add ID files to .gitignore
gitignore: Add MIPS vmlinux.32 to the list
coccinelle: simple_return: Add a blank line
coccinelle: irqf_oneshot.cocci: Improve the generated commit log
coccinelle: api: add vma_pages.cocci
scripts/coccinelle/misc/irqf_oneshot.cocci: Fix grammar
scripts/coccinelle/misc/semicolon.cocci: Use imperative mood
coccinelle: simple_open: Use imperative mood
...
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
We cannot detect clang before including the arch Makefile, because that
can set the default cross compiler. We also cannot detect clang after
including the arch Makefile, because powerpc wants to know about clang.
Solve this by using an deferred variable. This costs us a few shell
invocations, but this is only a constant number.
Reported-by: Behan Webster <behanw@converseincode.com>
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Make sure 'make clean' removes *.su files generated by the gcc option
-fstack-usage.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Michal Marek <mmarek@suse.com>
Since commit 1329e8cc69 ("modsign: Extract signing cert from
CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped
with the signing key being specified as a relative path in either the
source or or the build trees.
However, the actual signing of modules has not worked if the filename
is relative to the source tree.
Fix that by moving the config_filename helper into scripts/Kbuild.include
so that it can be used from elsewhere, and then using it in the top-level
Makefile to find the signing key file.
Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while
we're at it. There's no need for them.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
The current rule for generating signing_key.priv and signing_key.x509 is
a classic example of a bad rule which has a tendency to break parallel
make. When invoked to create *either* target, it generates the other
target as a side-effect that make didn't predict.
So let's switch to using a single file signing_key.pem which contains
both key and certificate. That matches what we do in the case of an
external key specified by CONFIG_MODULE_SIG_KEY anyway, so it's also
slightly cleaner.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Move to using PKCS#7 messages as module signatures because:
(1) We have to be able to support the use of X.509 certificates that don't
have a subjKeyId set. We're currently relying on this to look up the
X.509 certificate in the trusted keyring list.
(2) PKCS#7 message signed information blocks have a field that supplies the
data required to match with the X.509 certificate that signed it.
(3) The PKCS#7 certificate carries fields that specify the digest algorithm
used to generate the signature in a standardised way and the X.509
certificates specify the public key algorithm in a standardised way - so
we don't need our own methods of specifying these.
(4) We now have PKCS#7 message support in the kernel for signed kexec purposes
and we can make use of this.
To make this work, the old sign-file script has been replaced with a program
that needs compiling in a previous patch. The rules to build it are added
here.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Pull kbuild fixes from Michal Marek:
"Two fixes for kbuild:
- The new ARCH_{CPP,A,C}FLAGS variables are reset before including
the arch Makefile
- Fix calling make modules_install twice when module compression is
enabled"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Makefile: Force gzip and xz on module install
kbuild: Do not pick up ARCH_{CPP,A,C}FLAGS from the environment
Running `make modules_install` ordinarily will overwrite existing
modules. This is the desired behavior, and is how pretty much every
other `make install` target works.
However, if CONFIG_MODULE_COMPRESS is enabled, modules are passed
through gzip and xz which then do the file writing. Both gzip and xz
will error out if the file already exists, unless -f is passed.
This patch adds -f so that the behavior is uniform.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Initialize the ARCH_* overrides before including the arch Makefile, to
avoid picking up the values from the environment. The variables can
still be overriden on the make command line, but this won't happen
by accident.
Signed-off-by: Michal Marek <mmarek@suse.com>
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVpgqZAAoJEGnX8d3iisJeSEgP/1HCS3kv/E/c+7pfPN1zZTMU
Miqyw/uu1R/691UA41mtN/+SfJEn49A5ti0xaw2LkxJYsInb+5EWL7SHWiiwB1lk
3tuuTYbz/15qss7c0kH/e+aukJx/8l+ahIHLTFQsTZCton8+vKQsEU5pRrVAFdzN
ksvfNYBg/6Hx2b20CpjAKWHXbBq4973txmlyQiEAi+3fSYVzFWoczCBrCE/4CMFg
GeItAQTQct5H8QvXzEj7VfadpMhqy2cG+AtaCT2B9CqlJnAPT4DGjWg25rXxOCr9
/zvjGwqrbq9hr89l83HoErhoOU2Hy0yEKNSh8qSFayRgERdHAAbh22TS7gaKLyAm
eOGZgVOeDrHpsyk58WnUmD18ePKy8tq9Z0ffNhqC+6USppwJxEHP2l9F8Ylf2/5F
t+6qhn3h430QYKE99Z3NXGdTccgWBK/IB3Ac3XiLuFhTJdpJnYLxaOrPtvKjXB39
AlWhIhy1BmyquCejyy8sH6i4/gnjY+9hgrrN/+k5N5+lWr7dR4Duje+zuzAiSrPv
62LmTK/dvkoW6BAAOD/IdUrepXvY3tN0laTLAOGmsvSQqM/oYv+f0kPnEuGRZldB
XaOtM0g7B+1a34jEoRw++xBx5FCOg1P4K3yLGbVpP9fJzguUJ5S/ENeNQgDjDWhh
9j7J1tz5zSaZEsEjfsHO
=CWXf
-----END PGP SIGNATURE-----
Merge tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression
since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: support HS38 releases
ARC: make sure instruction_pointer() returns unsigned value
ARC: slightly refactor macros for boot logging
ARC: Add llock/scond to futex backend
arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
ARC: Make ARC bitops "safer" (add anti-optimization)
ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
ARCv2: intc: IDU: support irq affinity
ARC: fix unused var wanring
ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
ARC: Override toplevel default -O2 with -O3
kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
ARCv2: guard SLC DMA ops with spinlock
ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
Since commit a1c48bb1 (Makefile: Fix unrecognized cross-compiler command
line options), the arch Makefile is included earlier by the main
Makefile, preventing the arc architecture to set its -O3 compiler
option. Since there might be more use cases for an arch Makefile to
fine-tune the options, add support for ARCH_CPPFLAGS, ARCH_AFLAGS and
ARCH_CFLAGS variables that are appended to the respective kbuild
variables. The user still has the final say via the KCPPFLAGS, KAFLAGS
and KCFLAGS variables.
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull kbuild updates from Michal Marek:
"Just a few kbuild core commits this time:
- kallsyms fix for CONFIG_XIP_KERNEL
- bashisms in scripts/link-vmlinux.sh fixed
- workaround to make DEBUG_INFO_REDUCED more useful yet still space
efficient
- clang is not wrongly detected when cross-compiling"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: include core debug info when DEBUG_INFO_REDUCED
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
scripts: fix link-vmlinux.sh bash-ism
Makefile: Fix detection of clang when cross-compiling
Pull perf updates from Ingo Molnar:
"Kernel side changes mostly consist of work on x86 PMU drivers:
- x86 Intel PT (hardware CPU tracer) improvements (Alexander
Shishkin)
- x86 Intel CQM (cache quality monitoring) improvements (Thomas
Gleixner)
- x86 Intel PEBSv3 support (Peter Zijlstra)
- x86 Intel PEBS interrupt batching support for lower overhead
sampling (Zheng Yan, Kan Liang)
- x86 PMU scheduler fixes and improvements (Peter Zijlstra)
There's too many tooling improvements to list them all - here are a
few select highlights:
'perf bench':
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
'perf top', 'perf report':
- Allow disabling/enabling events dynamicaly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo)
- Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
perf.data files (Namhyung Kim)
'perf probe': (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Greatly speed up 'perf probe --list' by caching debuginfo.
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc.
'perf sched':
- Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)
Plus tons of infrastructure work - in particular preparation for
upcoming threaded perf report support, but also lots of other work -
and fixes and other improvements. See (much) more details in the
shortlog and in the git log"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits)
perf tools: Configurable per thread proc map processing time out
perf tools: Add time out to force stop proc map processing
perf report: Fix sort__sym_cmp to also compare end of symbol
perf hists browser: React to unassigned hotkey pressing
perf top: Tell the user how to unfreeze events after pressing 'f'
perf hists browser: Honour the help line provided by builtin-{top,report}.c
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
perf annotate: Rename source_line_percent to source_line_samples
perf annotate: Display total number of samples with --show-total-period
perf tools: Ensure thread-stack is flushed
perf top: Allow disabling/enabling events dynamicly
perf evlist: Add toggle_enable() method
perf trace: Fix race condition at the end of started workloads
perf probe: Speed up perf probe --list by caching debuginfo
perf probe: Show usage even if the last event is skipped
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
perf tools: Fix a problem when opening old perf.data with different byte order
perf tools: Ignore .config-detected in .gitignore
perf probe: Fix to return error if no probe is added
...
User visible:
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc (Masami Hiramatsu)
- Show warning when running 'perf kmem stat' on a unsuitable perf.data file,
i.e. one with events that are not the ones required for the stat variant
used (Namhyung Kim).
Infrastructure:
- Auxtrace support patches, paving the way to support Intel PT and BTS (Adrian Hunter)
- hists browser (top, report) refactorings (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oEm1
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc (Masami Hiramatsu)
- Show warning when running 'perf kmem stat' on a unsuitable perf.data file,
i.e. one with events that are not the ones required for the stat variant
used (Namhyung Kim).
Infrastructure changes:
- Auxtrace support patches, paving the way to support Intel PT and BTS (Adrian Hunter)
- hists browser (top, report) refactorings (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Several fixes were needed to allow following builds:
$ make tools/tmon
$ make -C <kernelsrc> tools/perf
$ make -C <kernelsrc>/tools perf
- some of the tools (perf) use same make variables as in
kernel build, unsetting srctree and objtree
- using original $(O) for O variable
- perf build does not follow the descend function setup
invoking it via it's own make rule
I tried the rest of the tools/Makefile targets and they
seem to work now.
Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/1429389280-18720-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the host's C compiler is clang, and when attempting to
cross-compile Linux e.g. to MIPS with mipsel-linux-gcc, the Makefile
would incorrectly detect the use of clang, which resulted in
clang-specific flags being passed to mipsel-linux-gcc.
This can be verified under Debian by installing the "clang" package,
and then using it as the default compiler with:
sudo update-alternatives --config cc
This patch moves the detection of clang after the $(CC) variable is
initialized to the name of the cross-compiler, so that the check applies
to the cross-compiler and not the host's C compiler.
v2: Move the detection of clang after the inclusion of the
arch/*/Makefile (as they might set $(CROSS_COMPILE))
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
"Here is the first round of kbuild changes for v4.1-rc1:
- kallsyms fix for ARM and cleanup
- make dep(end) removed (developers have no sense of nostalgia these
days...)
- include Makefiles by relative path
- stop useless rebuilds of asm-offsets.h and bounds.h"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Kbuild: kallsyms: drop special handling of pre-3.0 GCC symbols
Kbuild: kallsyms: ignore veneers emitted by the ARM linker
kbuild: ia64: use $(src)/Makefile.gate rather than particular path
kbuild: include $(src)/Makefile rather than $(obj)/Makefile
kbuild: use relative path more to include Makefile
kbuild: use relative path to include Makefile
kbuild: do not add $(bounds-file) and $(offsets-file) to targets
kbuild: remove warning about "make depend"
kbuild: Don't reset timestamps in include/generated if not needed
Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.
To use relative path in any places, this commit moves the option
above the "sub-make" target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Enough time has passed since "make depend" was deprecated.
Nobody would be in trouble without this hint.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
.. after extensive statistical analysis of my G+ polling, I've come to
the inescapable conclusion that internet polls are bad.
Big surprise.
But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38%
margin, in a poll that people weren't even supposed to participate in.
Who can argue with solid numbers like that? 5,796 votes from people who
can't even follow the most basic directions?
In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%,
but with a total of 29,110 votes right now.
Now, arguably, that vote spread is only about 3,200 votes, which is less
than the almost six thousand votes that the "please ignore" poll got, so
it could be considered noise.
But hey, I asked, so I'll honor the votes.
Pull kbuild updates from Michal Marek:
- several cleanups in kbuild
- serialize multiple *config targets so that 'make defconfig kvmconfig'
works
- The cc-ifversion macro got support for an else-branch
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild,gcov: simplify kernel/gcov/Makefile more
kbuild: allow cc-ifversion to have the argument for false condition
kbuild,gcov: simplify kernel/gcov/Makefile
kbuild,gcov: remove unnecessary workaround
kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion
kbuild: fix cc-ifversion macro
kbuild: drop $(version_h) from MRPROPER_FILES
kbuild: use mixed-targets when two or more config targets are given
kbuild: remove redundant line from bounds.h/asm-offsets.h
kbuild: merge bounds.h and asm-offsets.h rules
kbuild: Drop support for clean-rule
This provides the basic infrastructure to load kernel-specific python
helper scripts when debugging the kernel in gdb.
The loading mechanism is based on gdb loading for <objfile>-gdb.py when
opening <objfile>. Therefore, this places a corresponding link to the
main helper script into the output directory that contains vmlinux.
The main scripts will pull in submodules containing Linux specific gdb
commands and functions. To avoid polluting the source directory with
compiled python modules, we link to them from the object directory.
Due to gdb.parse_and_eval and string redirection for gdb.execute, we
depend on gdb >= 7.2.
This feature is enabled via CONFIG_GDB_SCRIPTS.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Michal Marek <mmarek@suse.cz> [kbuild stuff]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel Address sanitizer (KASan) is a dynamic memory error detector. It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.
KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required. v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.
This patch only adds infrastructure for kernel address sanitizer. It's
not available for use yet. The idea and some code was borrowed from [1].
Basic idea:
The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.
Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.
Here is function to translate address to corresponding shadow address:
unsigned long kasan_mem_to_shadow(unsigned long addr)
{
return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible. Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).
To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.
These functions check whether memory region is valid to access or not by
checking corresponding shadow memory. If access is not valid an error
printed.
Historical background of the address sanitizer from Dmitry Vyukov:
"We've developed the set of tools, AddressSanitizer (Asan),
ThreadSanitizer and MemorySanitizer, for user space. We actively use
them for testing inside of Google (continuous testing, fuzzing,
running prod services). To date the tools have found more than 10'000
scary bugs in Chromium, Google internal codebase and various
open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
lots of others): [2] [3] [4].
The tools are part of both gcc and clang compilers.
We have not yet done massive testing under the Kernel AddressSanitizer
(it's kind of chicken and egg problem, you need it to be upstream to
start applying it extensively). To date it has found about 50 bugs.
Bugs that we've found in upstream kernel are listed in [5].
We've also found ~20 bugs in out internal version of the kernel. Also
people from Samsung and Oracle have found some.
[...]
As others noted, the main feature of AddressSanitizer is its
performance due to inline compiler instrumentation and simple linear
shadow memory. User-space Asan has ~2x slowdown on computational
programs and ~2x memory consumption increase. Taking into account that
kernel usually consumes only small fraction of CPU and memory when
running real user-space programs, I would expect that kernel Asan will
have ~10-30% slowdown and similar memory consumption increase (when we
finish all tuning).
I agree that Asan can well replace kmemcheck. We have plans to start
working on Kernel MemorySanitizer that finds uses of unitialized
memory. Asan+Msan will provide feature-parity with kmemcheck. As
others noted, Asan will unlikely replace debug slab and pagealloc that
can be enabled at runtime. Asan uses compiler instrumentation, so even
if it is disabled, it still incurs visible overheads.
Asan technology is easily portable to other architectures. Compiler
instrumentation is fully portable. Runtime has some arch-dependent
parts like shadow mapping and atomic operation interception. They are
relatively easy to port."
Comparison with other debugging features:
========================================
KMEMCHECK:
- KASan can do almost everything that kmemcheck can. KASan uses
compile-time instrumentation, which makes it significantly faster than
kmemcheck. The only advantage of kmemcheck over KASan is detection of
uninitialized memory reads.
Some brief performance testing showed that kasan could be
x500-x600 times faster than kmemcheck:
$ netperf -l 30
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
no debug: 87380 16384 16384 30.00 41624.72
kasan inline: 87380 16384 16384 30.00 12870.54
kasan outline: 87380 16384 16384 30.00 10586.39
kmemcheck: 87380 16384 16384 30.03 20.23
- Also kmemcheck couldn't work on several CPUs. It always sets
number of CPUs to 1. KASan doesn't have such limitation.
DEBUG_PAGEALLOC:
- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
granularity level, so it able to find more bugs.
SLUB_DEBUG (poisoning, redzones):
- SLUB_DEBUG has lower overhead than KASan.
- SLUB_DEBUG in most cases are not able to detect bad reads,
KASan able to detect both reads and writes.
- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
bugs only on allocation/freeing of object. KASan catch
bugs right before it will happen, so we always know exact
place of first bad read/write.
[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies
Based on work by Andrey Konovalov.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull s390 updates from Martin Schwidefsky:
- The remaining patches for the z13 machine support: kernel build
option for z13, the cache synonym avoidance, SMT support,
compare-and-delay for spinloops and the CES5S crypto adapater.
- The ftrace support for function tracing with the gcc hotpatch option.
This touches common code Makefiles, Steven is ok with the changes.
- The hypfs file system gets an extension to access diagnose 0x0c data
in user space for performance analysis for Linux running under z/VM.
- The iucv hvc console gets wildcard spport for the user id filtering.
- The cacheinfo code is converted to use the generic infrastructure.
- Cleanup and bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
s390/process: free vx save area when releasing tasks
s390/hypfs: Eliminate hypfs interval
s390/hypfs: Add diagnose 0c support
s390/cacheinfo: don't use smp_processor_id() in preemptible context
s390/zcrypt: fixed domain scanning problem (again)
s390/smp: increase maximum value of NR_CPUS to 512
s390/jump label: use different nop instruction
s390/jump label: add sanity checks
s390/mm: correct missing space when reporting user process faults
s390/dasd: cleanup profiling
s390/dasd: add locking for global_profile access
s390/ftrace: hotpatch support for function tracing
ftrace: let notrace function attribute disable hotpatching if necessary
ftrace: allow architectures to specify ftrace compile options
s390: reintroduce diag 44 calls for cpu_relax()
s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
s390/zcrypt: Number of supported ap domains is not retrievable.
s390/spinlock: add compare-and-delay to lock wait loops
s390/tape: remove redundant if statement
s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
...
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The introduction of the uapi directories in v3.7-rc1 moved some of the
generated headers from arch/*/include/generated to the uapi directory,
keeping the #include directives intact.
This creates a problem when bisecting, because the unversioned files are
not cleaned automatically by git and the compiler might include stale
headers as a result. Instead of cleaning them in the Makefiles, promote
arch/*/include/generated/uapi in the search path. Under normal
circumstances, there is no overlap between this uapi subdirectory and
its parent, so the include choices remain the same. We keep
arch/*/include/generated/uapi in the USERINCLUDE variable so that it is
usable standalone.
Note that we cannot completely swap the order of the uapi and
kernel-only directories, since the headers in include/uapi/asm-generic
are meant to be wrapped by their include/asm-generic counterparts when
building kernel code.
Reported-by: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Reported-by: David Drysdale <dmd@lurklurk.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now $(version_h) is include/generated/uapi/linux/version.h.
$(version_h) in MRPROPER_FILES is redundant because it is covered
by include/generated in MRPROPER_DIRS.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
"make kvmconfig" expects that the .config has already been created,
but some people might want to create the .config and run kvmconfig
in one shot command, like this:
$ make defconfig kvmconfig
To make sure this command works correctly even if -j* option is set,
we must handle them one by one.
This commit turns on mixed-targets when $(MAKECMDGOALS) includes
at least one config target and also includes another target.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
"Here are the kbuild changes for v3.19-rc1:
- Cleanups and deduplication in the main Makefile and
scripts/Makefile.*
- Sort the output of *config targets in make help
- Old <linux/version.h> is always removed to avoid a surprise during
bisecting
- Warning fix in kconfig"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: remove redundant -rR flag of hdr-inst
kbuild: Fix make help-<board series> on powerpc
kbuild: Automatically remove stale <linux/version.h> file
kconfig: Fix warning "‘jump’ may be used uninitialized"
Makefile: sort list of defconfig targets in make help output
kbuild: Remove duplicate $(cmd) definition in Makefile.clean
kbuild: collect shorthands into scripts/Kbuild.include
make ARCH=powerpc help-<board series> should not require a cofigured
source tree. Also, sort the boards in the output.
Signed-off-by: Michal Marek <mmarek@suse.cz>
In 3.7, the file moved from include/linux/ to
include/generated/uapi/linux/. The path in the #include directive
remained the same for compatibility reasons, but this created a problem
when bisecting. Commit 9c8cdb71 (kbuild: unconditionally clobber
include/linux/version.h on distclean) fixes this, provided the user does
make distclean between builds. Better not rely on the user and delete
the stale file each time make is invoked.
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Without sorting this list is completely unreadable for ARCH=arm.
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The shorthand "clean" is defined in both the top Makefile and
scripts/Makefile.clean. Likewise, the "hdr-inst" is defined in
both the top Makefile and scripts/Makefile.headersinst.
To reduce code duplication, this commit collects them into
scripts/Kbuild.include like the "build" and "modbuiltin" shorthands.
It requires scripts/Makefile.clean to include scripts/Kbuild.include,
but its impact on the performance of "make clean" should be
negligible.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Sasha Levin reports:
"gcc5 changes the default standard to c11, which makes kernel build
unhappy
Explicitly define the kernel standard to be gnu89 which should keep
everything working exactly like it was before gcc5"
There are multiple small issues with the new default, but the biggest
issue seems to be that the old - and very useful - GNU extension to
allow a cast in front of an initializer has gone away.
Patch updated by Kirill:
"I'm pretty sure all gcc versions you can build kernel with supports
-std=gnu89. cc-option is redunrant.
We also need to adjust HOSTCFLAGS otherwise allmodconfig fails for me"
Note by Andrew Pinski:
"Yes it was reported and both problems relating to this extension has
been added to gnu99 and gnu11. Though there are other issues with the
kernel dealing with extern inline have different semantics between
gnu89 and gnu99/11"
End result: we may be able to move up to a newer stdc model eventually,
but right now the newer models have some annoying deficiencies, so the
traditional "gnu89" model ends up being the preferred one.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Singed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild changes from Michal Marek:
- fix for handling dependencies of *-objs targets by Masahiro Yamada
- lots of cleanups in the kbuild machinery, also by Masahiro
- fixes for the kconfig build to use an UTF-8 capable ncurses library
if possible and to build on not-so-standard installs
- some more minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not reference *-n variables in the Makefile
kbuild: simplify build, clean, modbuiltin shorthands
kbuild: arm: Do not define "comma" twice
kbuild: remove obj-n and lib-n handling
kbuild: remove unnecessary variable initializaions
kbuild: remove unnecessary "obj- := dummy.o" trick
kbuild: handle C=... and M=... after entering into build directory
kbuild: use $(Q) for sub-make target
kbuild: fake the "Entering directory ..." message more simply
kconfig/lxdialog: get ncurses CFLAGS with pkg-config
kconfig: nconfig: fix multi-byte UTF handling
kconfig: lxdialog: fix spelling
kbuild: Make scripts executable
kbuild: remove redundant clean-files from scripts/kconfig/Makefile
kbuild: refactor script/kconfig/Makefile
kbuild: handle the dependency of multi-objs hostprogs appropriately
kbuild: handle multi-objs dependency appropriately
Pull documentation updates from Jiri Kosina:
"Updates to kernel documentation.
I took this over (hopefully temporarily) from Randy who was not
willing to maintain it any longer. This pile mostly is a relay of
queue that Randy already had in his tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc:
Documentation: fix broken v4l-utils URL
Documentation: update include path for mpssd
Documentation: correct parameter error for dma_mapping_error
MAINTAINERS: update location of linux-doc tree
Documentation: remove networking/.gitignore
tools: add more endian.h macros
Make Documenation depend on headers_install
Docs: this_cpu_ops: remove redundant add forms
Documentation: disable vdso_test to avoid breakage with old glibc
Documentation: update vDSO makefile to build portable examples
Documentation: update .gitignore files
Documentation: support glibc versions without htole macros
v4l2-pci-skeleton: Only build if PCI is available
Documentation: fix misc. warnings
Documentation: make functions static to avoid prototype warnings
Documentation: add makefiles for more targets
Documentation: use subdir-y to avoid unnecessary built-in.o files
Cheers,
Rusty.
PS. My virtio-next tree is empty: DaveM took the patches I had. There might
be a virtio-rng starvation fix, but so far it's a bit voodoo so I will
get to that in the next two days or it will wait.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QzCn
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"Nothing major: support for compressing modules, and auto-tainting
params.
PS. My virtio-next tree is empty: DaveM took the patches I had. There
might be a virtio-rng starvation fix, but so far it's a bit voodoo
so I will get to that in the next two days or it will wait"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
moduleparam: Resolve missing-field-initializer warning
kbuild: handle module compression while running 'make modules_install'.
modinst: wrap long lines in order to enhance cmd_modules_install
modsign: lookup lines ending in .ko in .mod files
modpost: simplify file name generation of *.mod.c files
modpost: reduce visibility of symbols and constify r/o arrays
param: check for tainting before calling set op.
drm/i915: taint the kernel if unsafe module parameters are set
module: add module_param_unsafe and module_param_named_unsafe
module: make it possible to have unsafe, tainting module params
module: rename KERNEL_PARAM_FL_NOARG to avoid confusion
$(if $(KBUILD_SRC),$(srctree)/) was a useful strategy
to omit a long absolute path for in-source-tree build
prior to commit 890676c65d
(kbuild: Use relative path when building in the source tree).
Now $(srctree) is "." when building in the source tree.
It would not be annoying to add "$(srctree)/" all the time.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This commit avoids processing C=... and M=... twice
when O=... is also given.
Besides, we can also remove KBUILD_EXTMOD="$(KBUILD_EXTMOD)"
in the sub-make target.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit 066b7ed955
(kbuild: Do not print the build directory with make -s),
"Q" is defined above the sub-make target.
This commit takes advantage of that and replaces
"$(if $(KBUILD_VERBOSE:1=),@)" with "$(Q)".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit c2e28dc975
(kbuild: Print the name of the build directory)
added a gimmick to show the "Entering directory ...".
Instead of echoing the hard-coded message (that is, we need to know
the exact message), moving --no-print-directory would be easier.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since module-init-tools (gzip) and kmod (gzip and xz) support compressed
modules, it could be useful to include a support for compressing modules
right after having them installed. Doing this in kbuild instead of per
distro can permit to make this kind of usage more generic.
This patch add a Kconfig entry to "Enable loadable module support" menu
and let you choose to compress using gzip (default) or xz.
Both gzip and xz does not used any extra -[1-9] option since Andi Kleen
and Rusty Russell prove no gain is made using them. gzip is called with -n
argument to avoid storing original filename inside compressed file, that
way we can save some more bytes.
On a v3.16 kernel, 'make allmodconfig' generated 4680 modules for a
total of 378MB (no strip, no sign, no compress), the following table
shows observed disk space gain based on the allmodconfig .config :
| time |
+-------------+-----------------+
| manual .ko | make | size | percent
| compression | modules_install | | gain
+-------------+-----------------+------+--------
- | | 18.61s | 378M |
GZIP | 3m16s | 3m37s | 102M | 73.41%
XZ | 5m22s | 5m39s | 77M | 79.83%
The gain for restricted environnement seems to be interesting while
uncompress can be time consuming but happens only while loading a module,
that is generally done only once.
This is fully compatible with signed modules while the signed module is
compressed. module-init-tools or kmod handles decompression
and provide to other layer the uncompressed but signed payload.
Reviewed-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Bertrand Jacquin <beber@meleeweb.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull misc kbuild updates from Michal Marek:
"This is the non-critical part of kbuild for 3.17-rc1:
- make help hint to use make -s with make kernelrelease et al.
- moved a kbuild document to Documentation/kbuild where it belongs
- four new Coccinelle scripts, one dropped and one fixed
- new make kselftest target to run various tests on the kernel"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: kselftest - new make target to build and run kernel selftests
Coccinelle: Script to replace if and BUG with BUG_ON
Coccinelle: Script to detect incorrect argument to sizeof
Coccinelle: Script to use ARRAY_SIZE instead of division of two sizeofs
Coccinelle: Script to detect cast after memory allocation
coccinelle/null: solve parse error
Documentation: headers_install.txt is part of kbuild
kbuild: make -s should be used with kernelrelease/kernelversion/image_name
Pull kbuild updates from Michal Marek:
- make clean also considers $(extra-m) and $(extra-) to be consistent
- cleanup and fixes in scripts/Makefile.host
- allow to override the name of the Python 2 executable with make
PYTHON=... (only needed for ia64 in practice)
- option to split debugingo into *.dwo files to save disk space if the
compiler supports it (CONFIG_DEBUG_INFO_SPLIT)
- option to use dwarf4 debuginfo if the compiler supports it
(CONFIG_DEBUG_INFO_DWARF4)
- fix for disabling certain warnings with clang
- fix for unneeded rebuild with dash when a command contains
backslashes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix handling of backslashes in *.cmd files
kbuild, LLVMLinux: Supress warnings unless W=1-3
Kbuild: Add a option to enable dwarf4 v2
kbuild: Support split debug info v4
kbuild: allow to override Python command name
kbuild: clean-up and bug fix of scripts/Makefile.host
kbuild: clean up scripts/Makefile.host
kbuild: drop shared library support from Makefile.host
kbuild: fix a bug of C++ host program handling
kbuild: fix a typo in scripts/Makefile.host
scripts/Makefile.clean: clean also $(extra-m) and $(extra-)
Add a new make target "kselftest" to enable kernel testing. This
new target builds and runs kernel selftests. Running as root is
recommended for a complete test run as some tests don't run when
run by non-root user. Build, install, and boot kernel before
running kselftest on it.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We have been chasing a memory corruption bug, which turned out to be
caused by very old gcc (4.3.4), which happily turned conditional load
into a non-conditional one, and that broke correctness (the condition
was met only if lock was held) and corrupted memory.
This particular problem with that particular code did not happen when
never gccs were used. I've brought this up with our gcc folks, as I
wanted to make sure that this can't really happen again, and it turns
out it actually can.
Quoting Martin Jambor <mjambor@suse.cz>:
"More current GCCs are more careful when it comes to replacing a
conditional load with a non-conditional one, most notably they check
that a store happens in each iteration of _a_ loop but they assume
loops are executed. They also perform a simple check whether the
store cannot trap which currently passes only for non-const
variables. A simple testcase demonstrating it on an x86_64 is for
example the following:
$ cat cond_store.c
int g_1 = 1;
int g_2[1024] __attribute__((section ("safe_section"), aligned (4096)));
int c = 4;
int __attribute__ ((noinline))
foo (void)
{
int l;
for (l = 0; (l != 4); l++) {
if (g_1)
return l;
for (g_2[0] = 0; (g_2[0] >= 26); ++g_2[0])
;
}
return 2;
}
int main (int argc, char* argv[])
{
if (mprotect (g_2, sizeof(g_2), PROT_READ) == -1)
{
int e = errno;
error (e, e, "mprotect error %i", e);
}
foo ();
__builtin_printf("OK\n");
return 0;
}
/* EOF */
$ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=0
$ ./a.out
OK
$ ~/gcc/trunk/inst/bin/gcc cond_store.c -O2 --param allow-store-data-races=1
$ ./a.out
Segmentation fault
The testcase fails the same at least with 4.9, 4.8 and 4.7. Therefore
I would suggest building kernels with this parameter set to zero. I
also agree with Jikos that the default should be changed for -O2. I
have run most of the SPEC 2k6 CPU benchmarks (gamess and dealII
failed, at -O2, not sure why) compiled with and without this option
and did not see any real difference between respective run-times"
Hopefully the default will be changed in newer gccs, but let's force it
for kernel builds so that we are on a safe side even when older gcc are
used.
The code in question was out-of-tree printk-in-NMI (yeah, surprise
suprise, once again) patch written by Petr Mladek, let me quote his
comment from our internal bugzilla:
"I have spent few days investigating inconsistent state of kernel ring buffer.
It went out that it was caused by speculative store generated by
gcc-4.3.4.
The problem is in assembly generated for make_free_space(). The functions is
called the following way:
+ vprintk_emit();
+ log = MAIN_LOG; // with logbuf_lock
or
log = NMI_LOG; // with nmi_logbuf_lock
cont_add(log, ...);
+ cont_flush(log, ...);
+ log_store(log, ...);
+ log_make_free_space(log, ...);
If called with log = NMI_LOG then only nmi_log_* global variables are safe to
modify but the generated code does store also into (main_)log_* global
variables:
<log_make_free_space>:
55 push %rbp
89 f6 mov %esi,%esi
48 8b 05 03 99 51 01 mov 0x1519903(%rip),%rax # ffffffff82620868 <nmi_log_next_id>
44 8b 1d ec 98 51 01 mov 0x15198ec(%rip),%r11d # ffffffff82620858 <log_next_idx>
8b 35 36 60 14 01 mov 0x1146036(%rip),%esi # ffffffff8224cfa8 <log_buf_len>
44 8b 35 33 60 14 01 mov 0x1146033(%rip),%r14d # ffffffff8224cfac <nmi_log_buf_len>
4c 8b 2d d0 98 51 01 mov 0x15198d0(%rip),%r13 # ffffffff82620850 <log_next_seq>
4c 8b 25 11 61 14 01 mov 0x1146111(%rip),%r12 # ffffffff8224d098 <log_buf>
49 89 c2 mov %rax,%r10
48 21 c2 and %rax,%rdx
48 8b 1d 0c 99 55 01 mov 0x155990c(%rip),%rbx # ffffffff826608a0 <nmi_log_buf>
49 c1 ea 20 shr $0x20,%r10
48 89 55 d0 mov %rdx,-0x30(%rbp)
44 29 de sub %r11d,%esi
45 29 d6 sub %r10d,%r14d
4c 8b 0d 97 98 51 01 mov 0x1519897(%rip),%r9 # ffffffff82620840 <log_first_seq>
eb 7e jmp ffffffff81107029 <log_make_free_space+0xe9>
[...]
85 ff test %edi,%edi # edi = 1 for NMI_LOG
4c 89 e8 mov %r13,%rax
4c 89 ca mov %r9,%rdx
74 0a je ffffffff8110703d <log_make_free_space+0xfd>
8b 15 27 98 51 01 mov 0x1519827(%rip),%edx # ffffffff82620860 <nmi_log_first_id>
48 8b 45 d0 mov -0x30(%rbp),%rax
48 39 c2 cmp %rax,%rdx # end of loop
0f 84 da 00 00 00 je ffffffff81107120 <log_make_free_space+0x1e0>
[...]
85 ff test %edi,%edi # edi = 1 for NMI_LOG
4c 89 0d 17 97 51 01 mov %r9,0x1519717(%rip) # ffffffff82620840 <log_first_seq>
^^^^^^^^^^^^^^^^^^^^^^^^^^
KABOOOM
74 35 je ffffffff81107160 <log_make_free_space+0x220>
It stores log_first_seq when edi == NMI_LOG. This instructions are used also
when edi == MAIN_LOG but the store is done speculatively before the condition
is decided. It is unsafe because we do not have "logbuf_lock" in NMI context
and some other process migh modify "log_first_seq" in parallel"
I believe that the best course of action is both
- building kernel (and anything multi-threaded, I guess) with that
optimization turned off
- persuade gcc folks to change the default for future releases
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Martin Jambor <mjambor@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marek Polacek <polacek@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Richard Biener <richard.guenther@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a hopefully helpful comment above the (seemingly weird) compiler
flag selection logic.
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clang has more warnings enabled by default. Turn them off unless W is
set. This patch fixes a logic bug where warnings in clang were disabled
when W was set.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: bp@alien8.de
Signed-off-by: Michal Marek <mmarek@suse.cz>
I found that a lot of unresolvable variables when using gdb on the
kernel become resolvable when dwarf4 is enabled. So add a Kconfig flag
to enable it.
It definitely increases the debug information size, but on the other
hand this isn't so bad when debug fusion is used.
v2: Use cc-option
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This is an alternative approach to lower the overhead of debug info
(as we discussed a few days ago)
gcc 4.7+ and newer binutils have a new "split debug info" debug info
model where the debug info is only written once into central ".dwo" files.
This avoids having to copy it around multiple times, from the object
files to the final executable. It lowers the disk space
requirements. In addition it defaults to compressed debug data.
More details here: http://gcc.gnu.org/wiki/DebugFission
This patch adds a new option to enable it. It has to be an option,
because it'll undoubtedly break everyone's debuginfo packaging scheme.
gdb/objdump/etc. all still work, if you have new enough versions.
I don't see big compile wins (maybe a second or two faster or so), but the
object dirs with debuginfo get significantly smaller. My standard kernel
config (slightly bigger than defconfig) shrinks from 2.9G disk space
to 1.1G objdir (with non reduced debuginfo). I presume if you are IO limited
the compile time difference will be larger.
Only problem I've seen so far is that it doesn't play well with older
versions of ccache (apparently fixed, see
https://bugzilla.samba.org/show_bug.cgi?id=10005)
v2: various fixes from Dirk Gouders. Improve commit message slightly.
v3: Fix clean rules and improve Kconfig slightly
v4: Fix merge error in last version (Sam Ravnborg)
Clarify description that it mainly helps disk size.
Cc: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Michel Dänzer and a couple of other people reported inexplicable random
oopses in the scheduler, and the cause turns out to be gcc mis-compiling
the load_balance() function when debugging is enabled. The gcc bug
apparently goes back to gcc-4.5, but slight optimization changes means
that it now showed up as a problem in 4.9.0 and 4.9.1.
The instruction scheduling problem causes gcc to schedule a spill
operation to before the stack frame has been created, which in turn can
corrupt the spilled value if an interrupt comes in. There may be other
effects of this bug too, but that's the code generation problem seen in
Michel's case.
This is fixed in current gcc HEAD, but the workaround as suggested by
Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments
when compiling the kernel, which disables the gcc code that causes the
problem. This can result in slightly worse debug information for
variable accesses, but that is infinitely preferable to actual code
generation problems.
Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows
non-debug builds to verify that the debug build would be identical: we
can do
export GCC_COMPARE_DEBUG=1
to make gcc internally verify that the result of the build is
independent of the "-g" flag (it will make the compiler build everything
twice, toggling the debug flag, and compare the results).
Without the "-fno-var-tracking-assignments" option, the build would fail
(even with 4.8.3 that didn't show the actual stack frame bug) with a gcc
compare failure.
See also gcc bugzilla:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801
Reported-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The specification of Python 3 is largely different from that of
Python 2.
For example, arch/ia64/scripts/unwcheck.py seems to be written
in Python 2, not compatible with Python 3.
It is not a good idea to invoke python scripts with the hard-coded
command name 'python'. The command 'python' could possibly be
Python 3 on some systems.
For that case, it is reasonable to allow to override the command name
by giving 'PYTHON=python2' from the command line.
The 'python' in arch/ia64/Makefile should be replaced with '$(PYTHON)'.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
If .config has been edited, there will be a silentoldconfig run:
$ make defconfig
...
$ make kernelrelease
scripts/kconfig/conf --silentoldconfig Kconfig
3.16.0-rc1+
Recently, kbuild started to print the name of the build directory when
using O=
$ make O=build kernelrelease
make[1]: Entering directory `/dev/shm/mmarek/linux-2.6/build'
3.16.0-rc1+
Since these targets are often used in scripts, add a hint to use make -s
to the help text.
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild fixes from Michal Marek:
"Three more fixes for the relative build dir feature:
- Shut up make -s again
- Fix for rpm/deb/tar-pkg with O=<subdir>
- Fix for CONFIG_EXTRA_FIRMWARE"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
firmware: Create directories for external firmware
kbuild: Fix packaging targets with relative $(srctree)
kbuild: Do not print the build directory with make -s
All other users of Makefile.build set $(obj) to the name of the
subdirectory to build. Do the same for the packaging targets, otherwise
the build fails if $(srctree) is a relative directory:
$ make O=build tar-pkg
make[1]: Entering directory `/home/mmarek/linux-2.6/build'
CHK include/config/kernel.release
../scripts/Makefile.build:44: ../../scripts/package/Makefile: No such file or directory
make[2]: *** No rule to make target `../../scripts/package/Makefile'. Stop.
Fixes: 9da0763b ("kbuild: Use relative path when building in a subdir of the source tree")
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit c2e28dc9 (kbuild: Print the name of the build directory) prints
the name of the build directory for O= builds, but we should not be
doing this in make -s mode, so that commands like
make -s O=<dir> kernelrelease
can be used by scripts. This matches the behavior of make itself, where
the -s option implies --no-print-directory.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild fix from Michal Marek:
"There is one more fix for the relative paths series from -rc1: Print
the path to the build directory at the start of the build, so that
editors and IDEs can match the relative paths to source files"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Print the name of the build directory
With commit 9da0763b (kbuild: Use relative path when building in a
subdir of the source tree), the compiler messages include relative
paths. These are however relative to the build directory, not the
directory where make was started. Print the "Entering directory ..."
message once, so that IDEs/editors can find the source files.
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
"Kbuild changes for v3.16-rc1:
- cross-compilation fix so that cc-option is testing the right
compiler
- Fix for make defconfig all
- Using relative paths to the object and source directory where
possible, plus fixes for the fallout of the change
- several cleanups in the Makefiles and scripts
The powerpc fix is from today, because it was only discovered
recently. The rest has been in linux-next for some time"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
powerpc: Avoid circular dependency with zImage.%
kbuild: create include/config directory in scripts/kconfig/Makefile
kbuild: do not create include/linux directory
Makefile: Fix unrecognized cross-compiler command line options
kbuild: do not add "selinux" to subdir- twice
um: Fix for relative objtree when generating x86 headers
kbuild: Use relative path when building in a subdir of the source tree
kbuild: Use relative path when building in the source tree
kbuild: Use relative path for $(objtree)
firmware: Use $(quote) in the Makefile
firmware: Simplify directory creation
kbuild: trivial - fix comment block indent
kbuild: trivial - remove trailing spaces
kbuild: support simultaneous "make %config" and "make all"
kbuild: move extra gcc checks to scripts/Makefile.extrawarn
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There are no generated files under include/linux directory.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
On architectures that setup CROSS_COMPILE in their arch/*/Makefile
(arc, blackfin, m68k, mips, parisc, score, sh, tile, unicore32, xtensa),
cc-option and cc-disable-warning may check against the wrong compiler,
causing errors like
cc1: error: unrecognized command line option "-Wno-maybe-uninitialized"
if the host gcc supports a compiler option, while the cross compiler
doesn't support that option.
Move all logic using cc-option or cc-disable-warning below the inclusion
of the arch's Makefile to fix this.
Introduced by
- commit e74fc973b6 ("Turn off
-Wmaybe-uninitialized when building with -Os"),
- commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").
As -Wno-maybe-uninitialized requires a quite recent gcc (gcc 4.6.3 on
Ubuntu 12.04 LTS doesn't support it), this only showed up recently (gcc
4.8.2 on Ubuntu 14.04 LTS does support it).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlOTY+wACgkQuseO5dulBZXrIgCdFZyXRojufLLKikWEvHjZ3/k5
KsQAnimtcge+62/IX7YwDjWS+xg9Wt3m
=yPrI
-----END PGP SIGNATURE-----
Merge tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel
Pull LLVM patches from Behan Webster:
"Next set of patches to support compiling the kernel with clang.
They've been soaking in linux-next since the last merge window.
More still in the works for the next merge window..."
* tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel:
arm, unwind, LLVMLinux: Enable clang to be used for unwinding the stack
ARM: LLVMLinux: Change "extern inline" to "static inline" in glue-cache.h
all: LLVMLinux: Change DWARF flag to support gcc and clang
net: netfilter: LLVMLinux: vlais-netfilter
crypto: LLVMLinux: aligned-attribute.patch
Both gcc (well, actually gnu as) and clang support the "-Wa,-gdwarf-2" option
(though clang does not support "-Wa,--gdwarf-2"). Since these flags are equivalent
in meaning, this patch uses the one which is better supported across compilers.
Signed-off-by: Behan Webster <behanw@converseincode.com>
When doing make O=<subdir>, use '..' to refer to the source tree. This
allows for more readable compiler messages, and, more importantly, it
sets the VPATH to '..', so filenames in WARN_ON() etc. will be shorter.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When not using O=, $(srctree) refers to the same directory as
$(objtree), so we can set it to '.' as well. This makes the default
include path more compact and results in more readable messages from the
compiler. The only case where we need the absolute path is when creating
the 'source' symlink in /lib/modules.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The main Makefile sets its working directory to the object tree and
never changes it again. Therefore, we can use '.' instead of the
absolute path. The only case where we need the absolute path is when
creating the 'build' symlink in /lib/modules.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Kbuild is supposed to support mixed targets. (%config and build targets)
But "make all" did nothing if it was run with configuration targets.
For example,
$ LANG=C make defconfig all
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
make: Nothing to be done for `all'.
This commits allows "make %config all" and makes sure
mixed targets are built one by one in the given order.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Marek <mmarek@suse.cz>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
W=... provides extra gcc checks.
Having such code in scripts/Makefile.build results in the same flags
being added to KBUILD_CFLAGS multiple times becuase
scripts/Makefile.build is invoked every time Kbuild descends into
the subdirectories.
Since the top Makefile is already too cluttered, this commit moves
all of extra gcc check stuff to a new file scripts/Makefile.extrawarn,
which is included from the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull misc kbuild changes from Michal Marek:
"Here is the non-critical part of kbuild:
- One bogus coccinelle check removed, one check fixed not to suggest
the obsolete PTR_RET macro
- scripts/tags.sh does not index the generated *.mod.c files
- new objdiff tool to list differences between two versions of an
object file
- A fix for scripts/bootgraph.pl"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/coccinelle: Use PTR_ERR_OR_ZERO
scripts/bootgraph.pl: Add graphic header
scripts: objdiff: detect object code changes between two commits
Coccicheck: Remove memcpy to struct assignment test
scripts/tags.sh: Ignore *.mod.c
Add support to toplevel Makefile for compiling with clang, both for
HOSTCC and CC. Use cc-option to prevent gcc option from breaking clang, and
from clang options from breaking gcc.
Clang 3.4 semantics are the same as gcc semantics for unsupported flags. For
unsupported warnings clang 3.4 returns true but shows a warning and gcc shows
a warning and returns false.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
objdiff is useful when doing large code cleanups. For example, when
removing checkpatch warnings and errors from new drivers in the staging
tree.
objdiff can be used in conjunction with a git rebase to confirm that
each commit made no changes to the resulting object code. It has the
same return values as diff(1).
This was written specifically to support adding the skein and threefish
cryto drivers to the staging tree. I needed a programmatic way to
confirm that commits changing >90% of the lines didn't inadvertently
change the code.
Temporary files (objdump output) are stored in
/path/to/linux/.tmp_objdiff
'make mrproper' will remove this directory.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild changes from Michal Marek:
- cleanups in the main Makefiles and Documentation/DocBook/Makefile
- make O=... directory is automatically created if needed
- mrproper/distclean removes the old include/linux/version.h to make
life easier when bisecting across the commit that moved the version.h
file
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: docbook: fix the include error when executing "make help"
kbuild: create a build directory automatically for out-of-tree build
kbuild: remove redundant '.*.cmd' pattern from make distclean
kbuild: move "quote" to Kbuild.include to be consistent
kbuild: docbook: use $(obj) and $(src) rather than specific path
kbuild: unconditionally clobber include/linux/version.h on distclean
kbuild: docbook: specify KERNELDOC dependency correctly
kbuild: docbook: include cmd files more simply
kbuild: specify build_docproc as a phony target
Updates to devicetree core code. This branch contains the following notable changes:
* Add reserved memory binding
* Make struct device_node a kobject and remove legacy /proc/device-tree
* ePAPR conformance fixes
* Update in-kernel DTC copy to version v1.4.0
* Preparation changes for dynamic device tree overlays
* minor bug fixes and documentation changes
The most significant change in this branch is the conversion of struct
device_node to be a kobject that is exposed via sysfs and removal of the
old /proc/device-tree code. This simplifies the device tree handling
code and tightens up the lifecycle on device tree nodes.
[updated: added fix for dangling select PROC_DEVICETREE]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=lyA5
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree changes from Grant Likely:
"Updates to devicetree core code. This branch contains the following
notable changes:
- add reserved memory binding
- make struct device_node a kobject and remove legacy
/proc/device-tree
- ePAPR conformance fixes
- update in-kernel DTC copy to version v1.4.0
- preparatory changes for dynamic device tree overlays
- minor bug fixes and documentation changes
The most significant change in this branch is the conversion of struct
device_node to be a kobject that is exposed via sysfs and removal of
the old /proc/device-tree code. This simplifies the device tree
handling code and tightens up the lifecycle on device tree nodes.
[updated: added fix for dangling select PROC_DEVICETREE]"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
dt: Remove dangling "select PROC_DEVICETREE"
of: Add support for ePAPR "stdout-path" property
of: device_node kobject lifecycle fixes
of: only scan for reserved mem when fdt present
powerpc: add support for reserved memory defined by device tree
arm64: add support for reserved memory defined by device tree
of: add missing major vendors
of: add vendor prefix for SMSC
of: remove /proc/device-tree
of/selftest: Add self tests for manipulation of properties
of: Make device nodes kobjects so they show up in sysfs
arm: add support for reserved memory defined by device tree
drivers: of: add support for custom reserved memory drivers
drivers: of: add initialization code for dynamic reserved memory
drivers: of: add initialization code for static reserved memory
of: document bindings for reserved-memory nodes
Revert "of: fix of_update_property()"
kbuild: dtbs_install: new make target
ARM: mvebu: Allows to get the SoC ID even without PCI enabled
of: Allows to use the PCI translator without the PCI core
...
Kbuild supports saving output files in a separate directory.
But the build directory must be created beforehand. For example,
$ mkdir -p dir/to/store/output/files
$ make O=dir/to/store/output/files defconfig
Creating a build directory automatically would be useful.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
'.*.cmd' files are cleaned-up by "make clean".
The same pattern in "make distclean" is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As of v3.7, the UAPI changes relocated headers around such that the
kernel version header lived in a new place.
If a person is bisecting and if you go back to pre-UAPI days,
you will create an include/linux/version.h -- then if you checkout a
post-UAPI kernel, and even run "make distclean" it still won't delete
that old version file. So you get a situation like this:
$ grep -R LINUX_VERSION_CODE include/
include/generated/uapi/linux/version.h:#define LINUX_VERSION_CODE 200192
include/linux/version.h:#define LINUX_VERSION_CODE 132646
The value in that second line is representative of a v2.6.38 version.
And it will be sourced/used, hence leading to strange behaviours, such
as drivers/staging content (which typically hasn't been purged of version
ifdefs) failing to build.
Since it is a subtle mode of failure, lets always clobber the old
file when doing a distclean.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions. Commit 8779657d29
("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") however
introduced an "else ifdef" construct which make 3.80 doesn't understand.
Also correct a warning message still referencing the old config option
name.
Apart from that I question the use of "ifdef" here (but it was used that
way already prior to said commit): ifeq (,y) would seem more to the
point.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An extra parenthesis typo introduced in 19952a9203 ("stackprotector:
Unify the HAVE_CC_STACKPROTECTOR logic between architectures") is
causing the following error when CONFIG_CC_STACKPROTECTOR_REGULAR is
enabled:
Makefile:608: Cannot use CONFIG_CC_STACKPROTECTOR: -fstack-protector not supported by compiler
Makefile:608: *** missing separator. Stop.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unlike other build products in the Linux kernel, there is no 'make
*install' mechanism to put devicetree blobs in a standard place.
This commit adds a new 'dtbs_install' make target which copies all of
the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be
set before calling make to change the default install directory. If not
set then it defaults to:
$INSTALL_PATH/dtbs/$KERNELRELEASE.
This is done to keep dtbs from different kernel versions separate until
things have settled down. Once the dtbs are stable, and not so strongly
linked to the kernel version, the devicetree files will most likely move
to their own repo. Users will need to upgrade install scripts at that
time.
v7: (reworked by Grant Likely)
- Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so
that each dtb install could have a separate target and be reported as
part of the make output.
- Fixed dependency problem to ensure $KERNELRELEASE is calculated before
attempting to install
- Removed option to call external script. Copying the files should be
sufficient and a build system can post-process the install directory.
Despite the fact an external script is used for installing the kernel,
I don't think that is a pattern that should be encouraged. I would
rather see buildroot type tools post process the install directory to
rename or move dtb files after installing to a staging directory.
- Plus it is easy to add a hook after the fact without blocking the
rest of this feature.
- Move the helper targets into scripts/Makefile.lib with the rest of the
common dtb rules
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
CONFIG_MODVERSIONS=y results in a .mod.c for every compiled file in the
kernel. Issuing a 'make cscope' on a compiled kernel tree results in
the cscope files containing *.mod.c files.
[prarit@prarit linux]# make cscope
[prarit@prarit linux]# cat cscope.files | grep mod.c | wc -l
4807
These files are not useful for cscope and should be ignored. For example,
# line filename / context / line
1 105 arch/x86/kvm/kvm-intel.mod.c <<GLOBAL>>
{ 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
2 508 drivers/block/mtip32xx/mtip32xx.h <<GLOBAL>>
int numa_node;
3 55 drivers/block/mtip32xx/mtip32xx.mod.c <<GLOBAL>>
{ 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
4 37 drivers/cpufreq/acpi-cpufreq.mod.c <<GLOBAL>>
{ 0x618911fc, __VMLINUX_SYMBOL_STR(numa_node) },
<snip>
Add an export to RCS_FIND_IGNORE so it can be used in scripts/tags.sh
and add explicitly ignore *.mod.c files.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull __TIME__/__DATE__ removal from Michal Marek:
"This series by Josh finishes the removal of __DATE__ and __TIME__ from
the kernel. The last patch adds -Werror=date-time to KBUILD_CFLAGS to
stop these from reappearing.
Part of the series went through Greg's trees during this merge window,
which is why this pull request is not based on v3.13-rc1"
* 'drop-time' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Makefile: Build with -Werror=date-time if the compiler supports it
x86: math-emu: Drop already-disabled print of build date
net: wireless: brcm80211: Drop debug version with build date/time
mtd: denali: Drop print of build date/time
Pull kbuild changes from Michal Marek:
- fix make -s detection with make-4.0
- fix for scripts/setlocalversion when the kernel repository is a
submodule
- do not hardcode ';' in macros that expand to assembler code, as some
architectures' assemblers use a different character for newline
- Fix passing --gdwarf-2 to the assembler
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
frv: Remove redundant debugging info flag
mn10300: Remove redundant debugging info flag
kbuild: Fix debugging info generation for .S files
arch: use ASM_NL instead of ';' for assembler new line character in the macro
kbuild: Fix silent builds with make-4
Fix detectition of kernel git repository in setlocalversion script [take #2]
GCC 4.9 and newer have a new warning -Wdate-time, which warns on any use
of __DATE__, __TIME__, or __TIMESTAMP__, which would make the build
non-deterministic. Now that the kernel does not use any of those
macros, turn on -Werror=date-time if available, to keep it that way.
The kernel already (optionally) records this information at build time
in a single place; other kernel code should not duplicate that.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Change the debuging info generation flag in KBUILD_AFLAGS from '-gdwarf-2' to
'-Wa,--gdwarf-2'. This will properly generate the debugging info for .S files
when CONFIG_DEBUG_INFO=y.
It seems current gcc does not pass a '--gdwarf-2' option on to the assembler
when '-gdwarf-2' is on its command line (note the differece in the gcc and as
flags). This change provides the correct assembler flag to gcc, and so does
not rely on gcc to emit a flag for the assembler.
Signed-off-by: Geoff Levand <geoff@infradead.org> for Huawei, Linaro
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull strong stackprotector support from Ingo Molnar:
"This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger
stack canary checking method supported by the newest GCC versions (4.9
and later).
Here's the 'intensity comparison' between the various protection
modes:
- defconfig
11430641 kernel text size
36110 function bodies
- defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
11468490 kernel text size (+0.33%)
1015 of 36110 functions are stack-protected (2.81%)
- defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
11692790 kernel text size (+2.24%)
7401 of 36110 functions are stack-protected (20.5%)
the strong model comes with non-trivial costs, which is why we
preserved the 'regular' and 'none' models as well"
* 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
make-4 changed the way/order it presents the command line options
into MAKEFLAGS
In make-3.8x, '-s' would always be first into a group of options
with the '-'/hyphen removed
$ make -p -s 2>/dev/null | grep ^MAKEFLAGS
MAKEFLAGS = sp
In make-4, '-s' seems to always be last into a group of options
with the '-'/hyphen removed
$ make -s -p 2>/dev/null | grep ^MAKEFLAGS
MAKEFLAGS = ps
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 1bf49dd4be ("./Makefile: export initial ramdisk compression
config option") started setting the INITRD_COMPRESS environment variable
depending on which decompression models the kernel had available.
That is completely broken.
For example, we by default have CONFIG_RD_LZ4 enabled, and are able to
decompress such an initrd, but the user tools to *create* such an initrd
may not be availble. So trying to tell dracut to generate an
lz4-compressed image just because we can decode such an image is
completely inappropriate.
Cc: J P <ppandit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes the stack protector config option into a choice of
"None", "Regular", and "Strong":
CONFIG_CC_STACKPROTECTOR_NONE
CONFIG_CC_STACKPROTECTOR_REGULAR
CONFIG_CC_STACKPROTECTOR_STRONG
"Regular" means the old CONFIG_CC_STACKPROTECTOR=y option.
"Strong" is a new mode introduced by this patch. With "Strong" the
kernel is built with -fstack-protector-strong (available in
gcc 4.9 and later). This option increases the coverage of the stack
protector without the heavy performance hit of -fstack-protector-all.
For reference, the stack protector options available in gcc are:
-fstack-protector-all:
Adds the stack-canary saving prefix and stack-canary checking
suffix to _all_ function entry and exit. Results in substantial
use of stack space for saving the canary for deep stack users
(e.g. historically xfs), and measurable (though shockingly still
low) performance hit due to all the saving/checking. Really not
suitable for sane systems, and was entirely removed as an option
from the kernel many years ago.
-fstack-protector:
Adds the canary save/check to functions that define an 8
(--param=ssp-buffer-size=N, N=8 by default) or more byte local
char array. Traditionally, stack overflows happened with
string-based manipulations, so this was a way to find those
functions. Very few total functions actually get the canary; no
measurable performance or size overhead.
-fstack-protector-strong
Adds the canary for a wider set of functions, since it's not
just those with strings that have ultimately been vulnerable to
stack-busting. With this superset, more functions end up with a
canary, but it still remains small compared to all functions
with only a small change in performance. Based on the original
design document, a function gets the canary when it contains any
of:
- local variable's address used as part of the right hand side
of an assignment or function argument
- local variable is an array (or union containing an array),
regardless of array type or length
- uses register local variables
https://docs.google.com/a/google.com/document/d/1xXBH6rRZue4f296vGt9YQcuLVQHeE516stHwt8M9xyU
Find below a comparison of "size" and "objdump" output when built with
gcc-4.9 in three configurations:
- defconfig
11430641 kernel text size
36110 function bodies
- defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
11468490 kernel text size (+0.33%)
1015 of 36110 functions are stack-protected (2.81%)
- defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
11692790 kernel text size (+2.24%)
7401 of 36110 functions are stack-protected (20.5%)
With -strong, ARM's compressed boot code now triggers stack
protection, so a static guard was added. Since this is only used
during decompression and was never used before, the exposure
here is very small. Once it switches to the full kernel, the
stack guard is back to normal.
Chrome OS has been using -fstack-protector-strong for its kernel
builds for the last 8 months with no problems.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-3-git-send-email-keescook@chromium.org
[ Improved the changelog and descriptions some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.
Commit 1bf49dd4be ("./Makefile: export initial ramdisk compression
config option") however introduced "else ifeq" constructs which make
3.80 doesn't understand. Replace the logic there with more conventional
(in the kernel build infrastructure) list constructs (except that the
list here is intentionally limited to exactly one element).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild changes from Michal Marek:
- LTO fixes, but the kallsyms part had to be reverted
- Pass -Werror=implicit-int and -Werror=strict-prototypes to the
compiler by default
- snprintf fix in modpost
- remove GREP_OPTIONS from the environment to be immune against exotic
grep option settings
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kallsyms: Revert back to 128 max symbol length
Kbuild: Ignore GREP_OPTIONS env variable
scripts: kallsyms: Use %zu to print 'size_t'
scripts/bloat-o-meter: use .startswith rather than fragile slicing
scripts/bloat-o-meter: ignore changes in the size of linux_banner
kbuild: replace unbounded sprintf call in modpost
kbuild, bloat-o-meter: fix static detection
Kbuild: Handle longer symbols in kallsyms.c
kbuild: Increase kallsyms max symbol length
Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
Make menuconfig allows one to choose compression format of an initial
ramdisk image. But this choice does not result in duly compressed ramdisk
image. Because - $ make install - does not pass on the selected
compression choice to the dracut(8) tool, which creates the initramfs
file. dracut(8) generates the image with the default compression, ie.
gzip(1).
This patch exports the selected compression option to a sub-shell
environment, so that it could be used by dracut(8) tool to generate
appropriately compressed initramfs images.
There isn't a straightforward way to pass on options to dracut(8) via
positional parameters. Because it is indirectly invoked at the end of a $
make install sequence.
# make install
-> arch/$arch/boot/Makefile
-> arch/$arch/boot/install.sh
-> /sbing/installkernel ...
-> /sbin/new-kernel-pkg ...
-> /sbin/dracut ...
Signed-off-by: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building the kernel in a shell which defines GREP_OPTIONS so that
grep behavior is modified, we can break the generation of the syscalls
table like so:
__SYSCALL_COMMON(^[[01;31m^[[K0^[[m^[[K, sys_read, sys_read)
__SYSCALL_COMMON(^[[01;31m^[[K1^[[m^[[K, sys_write, sys_write)
__SYSCALL_COMMON(^[[01;31m^[[K1^[[m^[[K0, sys_mprotect, sys_mprotect) ...
This is just the initial breakage, later we barf when generating
modules.
In this case, GREP_OPTIONS contains "--color=always" which adds the shell
colors markup and completely fudges the headers under ...generated/asm/.
Fix that by unexporting the GREP_OPTIONS variable for the whole kernel
build as we tend to use grep at a bunch of places.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The common error found in forward-ported/backported patches is missing
headers. One recent example (files and function names are mangled):
void foo(){}
EXPORT_SYMBOL(foo);
gave only warning
foo.c:12345678:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
void foo(){}
^
foo.c:12345679:5: warning: data definition has no type or storage class [enabled by default]
EXPORT_SYMBOL(foo);
foo.c:12345679:5: warning: type defaults to 'int' in declaration of 'EXORT_SYMBOL' [-Werror=implicit-int]
Now it's a fatal error. Tested on x86_64 allyesconfig.
[akpm@linux-foundation.org: fix typos in comments]
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This reverts the Linux for Workgroups thing. And no, before somebody
asks, we're not doing Linux95. Not for a few years, at least.
Sure, the flag added some color to the logo, and could have remained as
a testament to my leet gimp skills. But no. And I'll do this early, to
avoid the chance of forgetting when I'm doing the actual rc1 release on
the road.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild update from Michal Marek:
"Only these two commits are in the kbuild branch this time:
- Using filechk for include/config/kernel.release
- Cleanup in scripts/sortextable.c"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not overwrite include/config/kernel.release needlessly
scripts: remove unused function in sortextable.c
This reverts commit d2aae8477c.
It is completely and utterly broken. Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.
The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files. They should only ever copy the
already-built files over.
So having dependencies for the install targets is wrong, wrong, wrong.
If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild updates from Michal Marek:
- fix for make headers_install argv explosion with too long path
- scripts/setlocalversion does not call git update-index needlessly
- fix for the src.rpm produced by make rpm-pkg. The new make
image_name can be useful also for other packaging tools.
- scripts/mod/devicetable-offsets.o is not rebuilt during each make run
- make modules_install dependency fix
- scripts/sortextable portability fix
- fix for kbuild to generate the output directory for all object files
in subdirs.
- a couple of minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: create directory for dir/file.o
tools/include: use stdint types for user-space byteshift headers
Makefile: Fix install error with make -j option
Fix a build warning in scripts/mod/file2alias.c
improve modalias building
scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
kbuild: fix error when building from src rpm
scripts/setlocalversion on write-protected source tree
Makefile.lib: align DTB quiet_cmd
kbuild: fix make headers_install when path is too long
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
The following issue can be reproduced with Linus' tree on
an x86_64 server.
>+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2
>cp: missing destination file operand after
>/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2'
>Try `cp --help' for more information.
>error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install)
Here are the commands to reproduce:
make defconfig
make rpm-pkg
Use the resulting src rpm to build as follows:
mkdir ~/rpmbuild-test
cd ~/rpmbuild-test
rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm
The issue is because the %install script uses $KBUILD_IMAGE and it hasn't
been set since it is only available in the kbuild system and not in the
%install script.
This patch adds a Makefile target to emit the image_name that can be used
and modifies the mkspec to use the dynamic name in %install.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull misc kbuild updates from Michal Marek:
"Non-critical kbuild changes:
- make coccicheck improvements, but no new semantic patches this time
- make rpm improvements
- make tar-pkg change to include the architecture in the filename.
This is a deliberate incompatibility, but nobody has complained so
far and it is useful if you build for different architectures. It
also matches what the deb-pkg and rpm-pkg targets produce.
- kbuild documentation fix"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
rpm-pkg: Remove pointless set -e statements
rpm-pkg: Always regenerate the specfile
rpm-pkg: Do not write to the parent directory
rpm-pkg: Do not package the whole source directory
buildtar: Add ARCH to the archive name
Coccinelle: Fix patch output when coccicheck is used with M= and C=
Coccinelle: Add support to the SPFLAGS variable
Coccinelle: Cleanup the setting of the FLAGS and OPTIONS variables
Coccinelle: Restore coccicheck verbosity in ONLINE mode (C=1 or C=2)
scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT
doc: change example to existing Makefile fragment
scripts/tags.sh: Add magic for OFFSET and DEFINE
fix a remove/insert race which Never Happens, and (my favorite) handle the
case when we have too many modules for a single commandline. Seriously,
the kernel is full, please go away!
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=MPiD
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull mudule updates from Rusty Russell:
"We get rid of the general module prefix confusion with a binary config
option, fix a remove/insert race which Never Happens, and (my
favorite) handle the case when we have too many modules for a single
commandline. Seriously, the kernel is full, please go away!"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
X.509: Support parse long form of length octets in Authority Key Identifier
module: don't unlink the module until we've removed all exposure.
kernel: kallsyms: memory override issue, need check destination buffer length
MODSIGN: do not send garbage to stderr when enabling modules signature
modpost: handle huge numbers of modules.
modpost: add -T option to read module names from file/stdin.
modpost: minor cleanup.
genksyms: pass symbol-prefix instead of arch
module: fix symbol versioning with symbol prefixes
CONFIG_SYMBOL_PREFIX: cleanup.
Here is a collection of fixes (and some intermixed cleanups) that were
considered less important and thus not included in the later parts of
the 3.9-rc cycle.
It's a bit all over the map, contents wise. A series of ux500 fixes
and cleanups, a bunch of various fixes for OMAP and tegra, and some for
Freescale i.MX and even Qualcomm MSM.
Note that there's also a patch on this branch to globally turn off
-Wmaybe-uninitialized when building with -Os. It's been posted several
times by Arnd and no dissent was raised, but nobody seemed interested
to pick it up. So here it is, as the topmost patch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bzsu
-----END PGP SIGNATURE-----
Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-critical fixes from Olof Johansson:
"Here is a collection of fixes (and some intermixed cleanups) that were
considered less important and thus not included in the later parts of
the 3.9-rc cycle.
It's a bit all over the map, contents wise. A series of ux500 fixes
and cleanups, a bunch of various fixes for OMAP and tegra, and some
for Freescale i.MX and even Qualcomm MSM.
Note that there's also a patch on this branch to globally turn off
-Wmaybe-uninitialized when building with -Os. It's been posted
several times by Arnd and no dissent was raised, but nobody seemed
interested to pick it up. So here it is, as the topmost patch."
* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
Turn off -Wmaybe-uninitialized when building with -Os
ARM: orion5x: include linux/cpu.h
ARM: tegra: call cpu_do_idle from C code
ARM: u300: fix ages old copy/paste bug
ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
ARM: tegra: fix build error when THUMB2_KERNEL enabled
ARM: msm: Fix uncompess.h tx underrun check
ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
ARM: mach-imx: mach-imx6q: Fix sparse warnings
ARM: mach-imx: src: Include "common.h
ARM: mach-imx: gpc: Include "common.h"
ARM: mach-imx: avic: Staticize *avic_base
ARM: mach-imx: tzic: Staticize *tzic_base
ARM: mach-imx: clk: Include "clk.h"
ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
...
Pull perf updates from Ingo Molnar:
"Features:
- Add "uretprobes" - an optimization to uprobes, like kretprobes are
an optimization to kprobes. "perf probe -x file sym%return" now
works like kretprobes. By Oleg Nesterov.
- Introduce per core aggregation in 'perf stat', from Stephane
Eranian.
- Add memory profiling via PEBS, from Stephane Eranian.
- Event group view for 'annotate' in --stdio, --tui and --gtk, from
Namhyung Kim.
- Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.
- Add Ivy Bridge-EP uncore support, by Zheng Yan
- IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.
- Add perf test entries for checking breakpoint overflow signal
handler issues, from Jiri Olsa.
- Add perf test entry for for checking number of EXIT events, from
Namhyung Kim.
- Add perf test entries for checking --cpu in record and stat, from
Jiri Olsa.
- Introduce perf stat --repeat forever, from Frederik Deweerdt.
- Add --no-demangle to report/top, from Namhyung Kim.
- PowerPC fixes plus a couple of cleanups/optimizations in uprobes
and trace_uprobes, by Oleg Nesterov.
Various fixes and refactorings:
- Fix dependency of the python binding wrt libtraceevent, from
Naohiro Aota.
- Simplify some perf_evlist methods and to allow 'stat' to share code
with 'record' and 'trace', by Arnaldo Carvalho de Melo.
- Remove dead code in related to libtraceevent integration, from
Namhyung Kim.
- Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
sched lat' back working, by Arnaldo Carvalho de Melo
- We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
de Melo.
- Kill a bunch of die() calls, from Namhyung Kim.
- Fix build on non-glibc systems due to libio.h absence, from Cody P
Schafer.
- Remove some perf_session and tracing dead code, from David Ahern.
- Honor parallel jobs, fix from Borislav Petkov
- Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
... and many more I missed to list, see the shortlog and git log for
more details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
perf/x86/intel/P4: Robistify P4 PMU types
perf/x86/amd: Fix AMD NB and L2I "uncore" support
perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
perf/x86: Check all MSRs before passing hw check
perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
perf/x86/intel: Add Ivy Bridge-EP uncore support
perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
uprobes/tracing: Change create_trace_uprobe() to support uretprobes
uprobes/tracing: Make seq_printf() code uretprobe-friendly
uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
uprobes/tracing: Generalize struct uprobe_trace_entry_head
uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
uprobes/tracing: Kill the pointless seq_print_ip_sym() call
uprobes/tracing: Kill the pointless task_pt_regs() calls
...
gcc-4.7 and higher add a lot of false positive warnings about
potential uses of uninitialized warnings, but only when optimizing
for size (-Os). This is the default when building allyesconfig,
which turns on CONFIG_CC_OPTIMIZE_FOR_SIZE.
In order to avoid getting a lot of patches that initialize such
variables and accidentally hide real errors along the way, let's
just turn off this warning on the respective gcc versions
when building with size optimizations. The -Wmaybe-uninitialized
option was introduced in the same gcc version (4.7) that is now
causing the false positives, so there is no effect on older compilers.
A side effect is that when building with CONFIG_CC_OPTIMIZE_FOR_SIZE,
we might now see /fewer/ warnings about possibly uninitialized
warnings than with -O2, but that is still much better than seeing
warnings known to be bogus.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Conflicts:
arch/x86/kernel/cpu/perf_event_intel.c
Merge in the latest fixes before applying new patches, resolve the conflict.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The source tree can contain lots of uninteresting data like tag or
cscope files, packaging which slows down make rpm needlessly. It can
also break the build, if the tree contains an unrelated file named
*.spec. The downside of this change is that new subdirectories have to
be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The
upside is that the behavior is more predictable.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild fix from Michal Marek:
"Fix for a missing dependency when generating scripts/mod/devicetable-offsets.h.
This dependency got introduced in v3.9-rc1."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: generate generic headers before recursing into scripts
The headers are now needed inside scripts/mod since 6543bec
("mod/file2alias: make modalias generation safe for cross compiling").
Reported-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-and-tested-by: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
. Honor parallel jobs, fix from Borislav Petkov
. Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
. Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.
. Remove some perf_session and tracing dead code, from David Ahern.
. Introduce perf stat --repeat forever, from Frederik Deweerdt.
. Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.
. Add perf test entries for checking breakpoint overflow signal handler issues,
from Jiri Olsa.
. Add perf test entry for for checking number of EXIT events, from Namhyung Kim.
. Simplify some perf_evlist methods and to allow 'stat' to share code with
'record' and 'trace'.
. Remove dead code in related to libtraceevent integration, from Namhyung Kim.
. Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=mrYT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Conflicts:
tools/Makefile
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
. Honor parallel jobs, fix from Borislav Petkov
. Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
. Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer.
. Remove some perf_session and tracing dead code, from David Ahern.
. Introduce perf stat --repeat forever, from Frederik Deweerdt.
. Add perf test entries for checking --cpu in record and stat, from Jiri Olsa.
. Add perf test entries for checking breakpoint overflow signal handler issues,
from Jiri Olsa.
. Add perf test entry for for checking number of EXIT events, from Namhyung Kim.
. Simplify some perf_evlist methods and to allow 'stat' to share code with
'record' and 'trace'.
. Remove dead code in related to libtraceevent integration, from Namhyung Kim.
. Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[ resolved the trivial merge conflict with upstream ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We need to hand down parallel build options like the internal make
--jobserver-fds one so that parallel builds can also happen when
building perf from the toplevel directory.
Make it so #1!
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-3-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have CONFIG_SYMBOL_PREFIX, which three archs define to the string
"_". But Al Viro broke this in "consolidate cond_syscall and
SYSCALL_ALIAS declarations" (in linux-next), and he's not the first to
do so.
Using CONFIG_SYMBOL_PREFIX is awkward, since we usually just want to
prefix it so something. So various places define helpers which are
defined to nothing if CONFIG_SYMBOL_PREFIX isn't set:
1) include/asm-generic/unistd.h defines __SYMBOL_PREFIX.
2) include/asm-generic/vmlinux.lds.h defines VMLINUX_SYMBOL(sym)
3) include/linux/export.h defines MODULE_SYMBOL_PREFIX.
4) include/linux/kernel.h defines SYMBOL_PREFIX (which differs from #7)
5) kernel/modsign_certificate.S defines ASM_SYMBOL(sym)
6) scripts/modpost.c defines MODULE_SYMBOL_PREFIX
7) scripts/Makefile.lib defines SYMBOL_PREFIX on the commandline if
CONFIG_SYMBOL_PREFIX is set, so that we have a non-string version
for pasting.
(arch/h8300/include/asm/linkage.h defines SYMBOL_NAME(), too).
Let's solve this properly:
1) No more generic prefix, just CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
2) Make linux/export.h usable from asm.
3) Define VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR().
4) Make everyone use them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com> (metag)
Pull kbuild changes from Michal Marek:
- Alias generation in modpost is cross-compile safe.
- kernel/timeconst.h is now generated using a bc script instead of
perl.
- scripts/link-vmlinux.sh now works with an alternative
$KCONFIG_CONFIG.
- destination-y for exported headers is supported in Kbuild files
again.
- depmod is called with -P $CONFIG_SYMBOL_PREFIX on architectures that
need it.
- CONFIG_DEBUG_INFO_REDUCED disables var-tracking
- scripts/setlocalversion works with too much translated locales ;)
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix reading of .config in link-vmlinux.sh
kbuild: Unset language specific variables in setlocalversion script
Kbuild: Disable var tracking with CONFIG_DEBUG_INFO_REDUCED
depmod: pass -P $CONFIG_SYMBOL_PREFIX
kbuild: Fix destination-y for installed headers
scripts/link-vmlinux.sh: source variables from KCONFIG_CONFIG
kernel: Replace timeconst.pl with a bc script
mod/file2alias: make modalias generation safe for cross compiling
lockdep, but it's a mechanical change.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=tiSY
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"The sweeping change is to make add_taint() explicitly indicate whether
to disable lockdep, but it's a mechanical change."
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
MODSIGN: Add option to not sign modules during modules_install
MODSIGN: Add -s <signature> option to sign-file
MODSIGN: Specify the hash algorithm on sign-file command line
MODSIGN: Simplify Makefile with a Kconfig helper
module: clean up load_module a little more.
modpost: Ignore ARC specific non-alloc sections
module: constify within_module_*
taint: add explicit flag to show whether lock dep is still OK.
module: printk message when module signature fail taints kernel.
Newer gcc enables the var-tracking pass with -g to keep track which
registers contain which variables. This is one of the slower passes in gcc.
With reduced debug info (aimed at objdump -S, but not using a full debugger)
we don't need this fine grained tracking. But it was still enabled
because -g was enabled. Disable it explicitely for DEBUG_INFO_REDUCED.
On my 8T workstation this gives me about a 12 second gain in building
a reasonable kernel config (2min16 vs 2min28) with DEBUG_INFO_REDUCED.
With full DEBUG_INFO it takes 2min46
The actual improvement in user time taken by the compiler is much higher
(all CPU combined user time 15min5s vs 16m30 before)
but the usual amdahl bottleneck on the linker prevents more speedup.
It still saves some more energy and keeps cycles for other things.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
On architectures which have symbol prefixes, depmod emits lots of
warnings like this:
WARNING: $module.ko needs unknown symbol $symbol
This is because depmod isn't being passed the -P <symbol_prefix>
arguments to specify the symbol prefix to ignore. This option is
included since the 3.13 release of module-init-tools.
Update scripts/depmod.sh to take extra arguments for the symbol prefix
(required but may be empty), and update the main Makefile to always pass
"$(CONFIG_SYMBOL_PREFIX)" to scripts/depmod.sh.
If the provided symbol prefix is non-empty, scripts/depmod.sh checks if
depmod --version reports module-init-tools with a version number < 3.13
otherwise it appends -P $SYMBOL_PREFIX to the depmod command line.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull two x86 kernel build changes from Ingo Molnar:
"The first change modifies how 'make oldconfig' works on cross-bitness
situations on x86. It was felt the new behavior of preserving the
bitness of the .config is more logical. This is a leftover of the
merge.
The second change eliminates a Perl warning. (There's another, more
complete fix resulting of this warning fix, which second fix in flight
to you via the kbuild tree, which will remove the timeconst.pl script
altogether.)"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timeconst.pl: Eliminate Perl warning
x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
To allow the builder to sign only a subset of modules, or to sign the
modules using a key that is not available on the build machine, add
CONFIG_MODULE_SIG_ALL. If this option is unset, no modules will be
signed during build. The default is 'y', to preserve the current
behavior.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the script usable without a .config file.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use the target compiler to compute the offsets for the fields of the
device_id structures, so that it won't be broken by different alignments
between the host and target ABIs.
This also fixes missing endian corrections for some modaliases.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
By popular demand, arch/aarch64 is now known as arch/arm64. However,
uname -m (and indeed the GNU triplet) still use aarch64 as the machine
string.
This patch fixes native builds of both the kernel and perf tools by
updating the relevant Makefiles to munge the output of uname -m and
set the ARCH variable appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It is easy to waste a bunch of time when one takes a 32-bit .config
from a test machine and try to build it on a faster 64-bit system, and
its existing setting of CONFIG_64BIT=n gets *changed* to match the
build host. Similarly, if one has an existing build tree it is easy
to trash an entire build tree that way.
This is because the default setting for $ARCH when discovered from
'uname' is one of the legacy pre-x86-merge values (i386 or x86_64),
which effectively force the setting of CONFIG_64BIT to match. We should
default to ARCH=x86 instead, finally completing the merge that we
started so long ago.
This patch preserves the behaviour of the legacy ARCH settings for commands
such as:
make ARCH=x86_64 randconfig
make ARCH=i386 randconfig
... since making the value of CONFIG_64BIT actually random in that situation
is not desirable.
In time, perhaps we can retire this legacy use of the old ARCH= values.
We already have a way to override values for *any* config option, using
$KCONFIG_ALLCONFIG, so it could be argued that we don't necessarily need
to keep ARCH={i386,x86_64} around as a special case just for overriding
CONFIG_64BIT.
We'd probably at least want to add a way to override config options from
the command line ('make CONFIG_FOO=y oldconfig') before we talk about doing
that though.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Link: http://lkml.kernel.org/r/1356040315.3198.51.camel@shinybook.infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull kbuild changes from Michal Marek:
"The kbuild changes are minimal this time:
- scripts/pnmlogo fix for some newer format
- minor top-level Makefile cleanup
- fix for a v3.5 regression with make clean M=<directory>"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not remove vmlinux when cleaning external module
scripts/pnmtologo: fix for plain PBM
kbuild: Remove reference to uninitialised variable
to verify the source of the module (ChromeOS) and/or use standard IMA on it
or other security hooks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJQ0VKlAAoJENkgDmzRrbjxjuEQALVHpD1cSmryOzVwkNn7rVGP
PV3KVbUs+qzUCm2c3AafIIlSBm2LOUl+cR3uNC7di8aHarRF3VHkK2OQ4Fx97ECd
KKBqAyY3R0q1mAKujb/MWwiK0YgosEDIOzGGn2yQhNFsxKqnMB02P4j82IO7+g+w
Cc3XuDyWHoH2I+ySgz0Q8NHAqufD/DMZUKud7jw2Lsv6PuICJ1Oqgl/Gd/muxort
4a5tV3tjhRGywHS/8b2fbDUXkybC5NKK0FN+gyoaROmJ/THeHEQDGXZT9bc2vmVx
HvRy/5k8dzQ6LAJ2mLnPvy0pmv0u7NYMvjxTxxUlUkFMkYuVticikQfwSYDbDPt4
mbsLxchpgi8z4x8HltEERffCX5tldo/5hz1uemqhqIsMRIrRFnlHkSIgkGjVHf2u
LXQBLT8uTm6C0VyNQPrI/hUZzIax7WtKbPSoK9lmExNbKqloEFh/mVXvfQxei2kp
wnUZcnmPIqSvw7b4CWu7HibMYu2VvGBgm3YIfJRi4AQme1mzFYLpZoxF5Pj+Ykbt
T//Hb1EsNQTTFCg7MZhnJSAw/EVUvNDUoullORClyqw6+xxjVKqWpPJgYDRfWOlJ
Xa+s7DNrL+Oo1WWR8l5ruoQszbR8szIyeyPKKxRUcQj2zsqghoWuzKAx2saSEw3W
pNkoJU+dGC7kG/yVAS8N
=uoJj
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"Nothing all that exciting; a new module-from-fd syscall for those who
want to verify the source of the module (ChromeOS) and/or use standard
IMA on it or other security hooks."
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
MODSIGN: Fix kbuild output when using default extra_certificates
MODSIGN: Avoid using .incbin in C source
modules: don't hand 0 to vmalloc.
module: Remove a extra null character at the top of module->strtab.
ASN.1: Use the ASN1_LONG_TAG and ASN1_INDEFINITE_LENGTH constants
ASN.1: Define indefinite length marker constant
moduleparam: use __UNIQUE_ID()
__UNIQUE_ID()
MODSIGN: Add modules_sign make target
powerpc: add finit_module syscall.
ima: support new kernel module syscall
add finit_module syscall to asm-generic
ARM: add finit_module syscall to ARM
security: introduce kernel_module_from_file hook
module: add flags arg to sys_finit_module()
module: add syscall to load module from fd
If CONFIG_MODULE_SIG is set, and 'make modules_sign' is called then this
patch will cause the modules to get a signature appended. The make target
is intended to be run after 'make modules_install', and will modify the
modules in-place in the installed location. It can be used to produce
signed modules after they have been processed by distribution build
scripts.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor typo fix)
Since commit 1f2bfbd00e "kbuild:
link of vmlinux moved to a script" make clean with M=<dir>
argument (so cleaning external module) removes vmlinux,
System.map and couple of other files from the *main* kernel
build directory! This not what was happening before and almost
certainly not what one would expect.
This patch moves makes the clean target of the script called
only when !KBUILD_EXTMOD.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Cc: stable@vger.kernel.org [v3.5+]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull perf fixes from Ingo Molnar:
"This is mostly about unbreaking architectures that took the UAPI
changes in the v3.7 cycle, plus misc fixes."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf kvm: Fix building perf kvm on non x86 arches
perf kvm: Rename perf_kvm to perf_kvm_stat
perf: Make perf build for x86 with UAPI disintegration applied
perf powerpc: Use uapi/unistd.h to fix build error
tools: Pass the target in descend
tools: Honour the O= flag when tool build called from a higher Makefile
tools: Define a Makefile function to do subdir processing
x86: Export asm/{svm.h,vmx.h,perf_regs.h}
perf tools: Fix strbuf_addf() when the buffer needs to grow
perf header: Fix numa topology printing
perf, powerpc: Fix hw breakpoints returning -ENOSPC
Verbose output variable is unnecessary because the command's echo is
already surpressed. Additionally because the block defines skip-makefile
the variable Q is not defined within the makefile, which can cause
problems if Q is defined in the users environment.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Honour the O= flag that was passed to a higher level Makefile and then passed
down as part of a tool build.
To make this work, the top-level Makefile passes the original O= flag and
subdir=tools to the tools/Makefile, and that in turn passes
subdir=$(O)/$(subdir)/foodir when building tool foo in directory
$(O)/$(subdir)/foodir (where the intervening slashes aren't added if an
element is missing).
For example, take perf. This is found in tools/perf/. Assume we're building
into directory ~/zebra/, so we pass O=~/zebra to make. Dependening on where
we run the build from, we see:
make run in dir $(OUTPUT) dir
======================= ==================
linux ~/zebra/tools/perf/
linux/tools ~/zebra/perf/
linux/tools/perf ~/zebra/
and if O= is not set, we get:
make run in dir $(OUTPUT) dir
======================= ==================
linux linux/tools/perf/
linux/tools linux/tools/perf/
linux/tools/perf linux/tools/perf/
The output directories are created by the descend function if they don't
already exist.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1378.1352379110@warthog.procyon.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Turn sign-file into perl and merge in x509keyid. The latter doesn't
need to be a separate script as it doesn't actually need to work out the
SHA1 sum of the X.509 certificate itself, since it can get that from the
X.509 certificate.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus deleted the old code and put signing on the install command,
I fixed it to extract the keyid and signer-name within sign-file
and cleaned up that script now it always signs in-place.
Some enthusiast should convert sign-key to perl and pull
x509keyid into it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds