Generate a unique inode numbers for any entries in the cram file system.
For files which did not contain data's (device nodes, fifos and sockets)
the offset of the directory entry inside the cramfs plus 1 will be used as
inode number.
The + 1 for the inode will it make possible to distinguish between a file
which contains no data and files which has data, the later one has a inode
value where the lower two bits are always 0.
It also reimplements the behavior to set the size and the number of block
to 0 for special file, which is the right value for empty files, devices,
fifos and sockets
As a little benefit it will be also more compatible which older mkcramfs,
because it will never use the cramfs_inode->offset for creating a inode
number for special files.
[akpm@linux-foundation.org: trivial comment fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, 3 kernel function prototypes are present in a header
file exported to userland. This patch fixes it.
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
aio_run_iocbs() is not used at all, so get rid of it.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When hypervisor decides to decrease target balloon size while the balloon
driver tries to lock pages hypervisor may respond with
VMW_BALLOON_PPN_NOTNEEDED. Use this data and immediately stop reserving
pages and wait for the next update cycle to fetch new target instead of
continuing trying to lock pages until size of refused list grows above
VMW_BALLOON_MAX_REFUSED (16) pages.
As a result the driver stops bothering the hypervisor with its attempts to
lock more pages that are not needed anymore. Most likely next order from
hypervisor will be to reduce ballon size anyway.
It is a small optimization.
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Apart from currently used standard memstick data transfer method, Sony
introduced several newer ones, to uncover full bandwidth/capacity of its
Pro, HG and XC media formats. This patch lays a foundation to enable
those methods as made possible by host/media capabilities.
As a side effect of this patch, mspro_block_read_attributes became more
streamlined and readable.
[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mspro_block_mutex is identical in scope to mspro_block_disk_lock and therefore
unnecessary.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement the usual pattern around idr_pre_get() and idr_get_new() to
handlethe situation where another thread concurrently steals this thread's
idr_pre_get() preallocation.
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a function jmb38x_ms_pmos() to enable / disable PMOS setups for
JMicron 38x controllers.
Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch corrects the definition of clock values for JMicron 38x
controllers and sets the value properly per interface type.
Also, it adds a check for TPC errors in the interrupt handler.
Signed-off-by: Aries Lee <arieslee@jmicron.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If device_register() fails then call put_device(). See comment to
device_register.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals. It uses parport abstraction layer and hrtimers to
precisely control the signal.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals. It uses parport abstraction layer and hrtimers to
precisely control the signal.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add parallel port PPS client. It uses a standard method for capturing
timestamps for assert edge transitions: getting a timestamp soon after an
interrupt has happened.
This is not a very precise source of time information due to interrupt
handling delays. However, timestamps for clear edge transitions are much
more precise because the interrupt handler continuously polls hardware
port until the transition is done.
Hardware port operations require only about 1us so the maximum error
should not exceed this value. This was my primary goal when developing
this client.
Clear edge capture could be disabled using clear_wait parameter.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MONOTONIC_RAW clock timestamps are ideally suited for frequency
calculation and also fit well into the original NTP hardpps design. Now
phase and frequency can be adjusted separately: the former based on
REALTIME clock and the latter based on MONOTONIC_RAW clock.
A new function getnstime_raw_and_real is added to timekeeping subsystem to
capture both timestamps at the same time and atomically.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills. However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal. The typical error is less then a microsecond.
To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately. Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.
Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the code that gatheres timestamp in pps_tty_dcd_change() in case
passed ts parameter is NULL because it never happens in the current code.
Fix comments as well.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bitwise conjunction is distributive so we can simplify some conditions.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way less overhead is involved when running production kernel. If you
want to debug a pps client module please define DEBUG to enable the
checks.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now pps_idr_lock is never used in interrupt context so we can replace
spin_lock_irq/spin_unlock_irq with plain spin_lock/spin_unlock. But
there is also a potential race condition when someone can steal an id
which was allocated by idr_pre_get before it is used. So convert spin
lock to mutex and protect the whole id generation process.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since now idr is only used to manage char device id's and not used in
kernel API anymore it should be moved to pps.c. This also makes it
possible to release id only at actual device freeing so nobody can
register a pps device with the same id while our device is not freed yet.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we now have direct pointers to struct pps_device everywhere it's
easy to use dev_* functions to print messages instead of plain printks.
Where dev_* cannot be used printks are converted to pr_*.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using device index as a pointer needs some unnecessary work to be done
every time the pointer is needed (in irq handler for example). Using a
direct pointer is much more easy (and safe as well).
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a helper function to gather timestamps. This way clients don't have
to duplicate it.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There was a race in PPS_FETCH ioctl handler when several processes want to
obtain PPS data simultaneously using sleeping PPS_FETCH. They all sleep
most of the time in the system call.
With the old approach when the first process waiting on the pps queue is
waken up it makes new system call right away and zeroes pps->go. So other
processes continue to sleep. This is a clear race condition because of
the global 'go' variable.
With the new approach pps->last_ev holds some value increasing at each PPS
event. PPS_FETCH ioctl handler saves current value to the local variable
at the very beginning so it can safely check that there is a new event by
just comparing both variables.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move variable declarations where they are used in pps_cdev_ioctl.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some very trivial fixes combined:
- add macro definitions to protect header file from including several times
- remove declaration for an unexistent array
- fix typos
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4be2c95d ("taskstats: pad taskstats netlink response for aligment
issues on ia64") added a null field to align the taskstats structure but
the discussion centered around ia64. The issue exists on other platforms
with inefficient unaligned access and adding them piecemeal would be an
unmaintainable mess.
This patch uses Dave Miller's suggestion of using a combination of
CONFIG_64BIT && !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine
whether alignment is needed.
Note that this will cause breakage on those platforms with applications
like iotop which had hard-coded offsets into the packet to access the
taskstats structure.
The message seen on systems without the alignment fixes looks like: kernel
unaligned access to 0xe000023879dca9bc, ip=0xa000000100133d10
The addresses may vary but resolve to locations inside __delayacct_add_tsk.
iotop makes what I'd call unreasonable assumptions about the contents of a
netlink genetlink packet containing generic attributes. They're typed and
have headers that specify value lengths, so the client can (should)
identify and skip the ones the client doesn't understand.
The kernel, as of version 2.6.36, presented a packet like so:
+--------------------------------+
| genlmsghdr - 4 bytes |
+--------------------------------+
| NLA header - 4 bytes | /* Aggregate header */
+-+------------------------------+
| | NLA header - 4 bytes | /* PID header */
| +------------------------------+
| | pid/tgid - 4 bytes |
| +------------------------------+
| | NLA header - 4 bytes | /* stats header */
| + -----------------------------+ <- oops. aligned on 4 byte boundary
| | struct taskstats - 328 bytes |
+-+------------------------------+
The iotop code expects that the kernel will behave as it did then,
assuming that the packet format is set in stone. The format is set in
stone, but the packet offsets are not. There's nothing in the packet
format that guarantees that the packet will be sent in exactly the same
way. The attribute contents are set (or versioned) and the aggregate
contents are set but they can be anywhere in the packet.
The issue here isn't that an unaligned structure gets passed to userspace,
it's that the NLA infrastructure has something of a weakness: The 4 byte
attribute header may force the payload to be unaligned. The taskstats
structure is created at an unaligned location and then 64-bit values are
operated on inside the kernel, so the unaligned access warnings gets
spewed everywhere.
It's possible to use the unaligned access API to operate on the structure
in the kernel but it seems like a wasted effort to work around userspace
code that isn't following the packet format. Any new additions would also
need the be worked around. It's a maintenance nightmare.
The conclusion of the earlier discussion seemed to be "ok fine, if we have
to break it, don't break it on arches that don't have the problem." Dave
pointed out that the unaligned access problem doesn't only exist on ia64,
but also on other 64-bit arches that don't have efficient unaligned access
and it should be fixed there as well. The committed version of the patch
and this addition keep with the conclusion of that discussion not to break
it unnecessarily, which the pid padding and the packet padding fixes did
do. x86_64 and powerpc don't suffer this problem so they shouldn't suffer
the solution. Other 64-bit architectures do and will, though.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reported-by: David S. Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Florian Mickler <florian@mickler.org>
Cc: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Creates a new "Near Field Communication" subsystem in drivers/nfc.
http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;)
This is a driver for the pn544 NFC device. The driver transfers
ETSI messages between the device and the user space.
Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently on 64-bit arch the user_namespace is 2096 and when being
kmalloc-ed it resides on a 4k slab wasting 2003 bytes.
If we allocate a separate cache for it and reduce the hash size from 128
to 64 chains the packaging becomes *much* better - the struct is 1072
bytes and the hole between is 98 bytes.
[akpm@linux-foundation.org: s/__initcall/module_init/]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ctl_unnumbered.txt have been removed in Documentation directory so just
also remove this invalid comments
[akpm@linux-foundation.org: fix Documentation/sysctl/00-INDEX, per Dave]
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In fsl_rio_dbell_handler() the code currently simply acknowledges the QFI
queue full interrupt, but does nothing to resolve the queue full
condition. Instead, it jumps to the end of the isr. When a queue full
condition occurs, the isr is then re-entered immediately and continually,
forever.
The fix is to just fall through and read out current doorbell entries.
Signed-off-by: Thomas Taranowski <tom@baringforge.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add new sRIO switch device IDs and enable a basic support for them.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the way how switchid value is set. Local counter variable does not
provide unified way to identify switch devices in a system with multiple
processors. Using local counter leads to the situation when the same RIO
switch has different switch ID for each processor. Replacing local
counter with unique portion of the Component Tag provides unified
reference to the switch by every processor in the system.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add setting links between rio_dev objects into the discovery process.
This needed to report device connections on agent (non-host) processors
that perform RIO discovery. Originally, these links have been introduced
for enumerating host only to support error management.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add definition of the unique device identifier field in the component tag.
RIO_CTAG_UDEVID does not take all 32 bits of the component tag value to
allow future extensions to the component tag use.
Selected size of the RIO_CTAG_UDEVID field (17 bits) is sufficient to
accommodate maximum number of endpoints in large RIO network (16-bit id)
plus switches.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert RIO switches device structures (rio_dev + rio_switch) into a
single allocation unit.
This change is based on the fact that RIO switches are using common RIO
device objects anyway. Allocating RIO switch objects as RIO devices with
added space for switch information simplifies handling of RIO switch
devices.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change code to use one storage location common for switches and endpoints.
This eliminates unnecessary device type checks during basic access
operations. Logic that assigns destid to RIO devices stays unchanged - as
before, switches use an associated destid because they do not have their
own.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 66fa12c571 ("ieee1394: remove the old IEEE 1394 driver stack")
eliminated the only user of cdev_index(). So it can be removed too.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 34aacb2920 ("procfs: Use generic_file_llseek in /proc/kcore") broke
seeking on /proc/kcore. This changes it back to use default_llseek in
order to restore the original behavior.
The problem with generic_file_llseek is that it only allows seeks up to
inode->i_sb->s_maxbytes, which is 2GB-1 on procfs, where the memory file
offset values in the /proc/kcore PT_LOAD segments may exceed or start
beyond that offset value.
A similar revert was made for /proc/vmcore.
Signed-off-by: Dave Anderson <anderson@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filename is supposed to match procfile name for random junk.
Add __init while I'm at it.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For the common case where a proc entry is being removed and nobody is in
the process of using it, save a LOCK/UNLOCK pair.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a PageSlab() check before adding the _mapcount value to /kpagecount.
page->_mapcount is in a union with the SLAB structure so for pages
controlled by SLAB, page_mapcount() returns nonsense.
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
single_open()'s third argument is for copying into seq_file->private. Use
that, rather than open-coding it.
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ->low_ino is write-once field -- reading it under locks is unnecessary.
- /proc/$PID stuff never reaches pde_put()/free_proc_entry() --
PROC_DYNAMIC_FIRST check never triggers.
- in proc_get_inode(), inode number always matches proc dir entry, so
save one parameter.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For string without format specifiers, use seq_puts().
For seq_printf("\n"), use seq_putc('\n').
text data bss dec hex filename
61866 488 112 62466 f402 fs/proc/proc.o
61729 488 112 62329 f379 fs/proc/proc.o
----------------------------------------------------
-139
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefani Seibold